SF5x Series DO-201AD. Page <1> 26/07/08 V1.1. Dimensions : Inches (Millimetres)
|
|
|
- Sarah Cox
- 6 years ago
- Views:
Transcription
1 Features: High efficiency, low V F. High current capability. High reliability. High surge current capability. Low power loss. For use in low voltage, high frequency inventor, free wheeling, and polarity protection application. DO-201AD Dimensions : Inches (Millimetres) Mechanical Data: Cases Lead Polarity High temperature soldering guaranteed Weight : Moulded plastic. : Pure tin plated, lead free, solderable per MIL-STD-202, Method 208 guaranteed. : Colour band denotes cathode end. : 260 C/10 seconds/0.375 inch, (9.5mm) lead lengths at 5lbs., (2.3kg) tension. : 1.2 grams. Page <1> 26/07/08 V1.1
2 Maximum Ratings and Electrical Characteristics Rating at 25 C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Type Number Symbol SF51 SF52 SF54 SF56 SF58 Units Maximum Recurrent Peak Reverse Voltage V RRM Maximum RMS Voltage V RMS V Maximum DC Blocking Voltage V DC Maximum Average Forward Rectified Current (9.5mm) Lead Length at T A = 55 C Peak Forward Surge Current, 8.3ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Maximum Instantaneous Forward Voltage at 5.0A Maximum DC Reverse Current at T A = 25 C at Rated DC Blocking Voltage at T A = 100 C I (AV) 5.0 A I FSM 150 V F V I R µa µa Maximum Reverse Recovery Time (Note 1) T rr 35 ns Typical Junction Capacitance (Note 2) C j pf Typical Thermal Resistance (Note 3) R θja R θjl C/W Operating Temperature Range T J -65 to +125 Storage Temperature Range T STG -65 to +150 C Note: 1. Reverse Recovery Test Conditions: I F = 0.5A, I R = 1.0A, I RR = 0.25A. 2. Measured at 1MHz and Applied Reverse Voltage of 4.0V dc. 3. Mount on Cu-Pad Size 16mm x 16mm on PCB. Page <2> 26/07/08 V1.1
3 Ratings and Characteristic Curves (SF51, SF52, SF54, SF56, SF58) Maximum Forward Current Derating Typical Reverse Characteristics Average Forward Current (A) Ambient Temperature ( C) Maximum Non-Repetitive Forward Surge Current Instantaneous Reverse Current (µa) Peak Forward Surge Current (A) Percent of Rated Peak Reverse Voltage (%) Typical Forward Characteristics Junction Capacitance (pf) Number of Cycles at 60Hz Typical Junction Capacitance Instantaneous Forward Current (A) Reverse Voltage (V) Forward Voltage (V) Page <3> 26/07/08 V1.1
4 Reverse Recovery Time Characteristic and Test Circuit Diagram Note: 1. Rise Time = 7ns Maximum. Input Impedance = 1 Megohm 22pf 2. Rise Time = 10ns Maximum Source Impedance = 50 ohms Part Number Table Description Diode, Ultra-Fast, 5A, 50V Diode, Ultra-Fast, 5A, 100V Diode, Ultra-Fast, 5A, 200V Diode, Ultra-Fast, 5A, 400V Diode, Ultra-Fast, 5A, 600V Part Number SF51 SF52 SF54 SF56 SF58 Page <4> 26/7/08 V1.1
5 Notes: International Sales Offices: AUSTRALIA Farnell Tel No: Fax No: FINLAND Farnell Tel No: Fax No: ITALY Farnell Tel No: Fax No: SPAIN Farnell Tel No: Fax No: AUSTRIA Farnell Tel No: Fax No: FRANCE Farnell Tel No: Fax No: MALAYSIA Tel No: Fax No: SWEDEN Farnell Tel No: Fax No: BELGIUM Farnell Tel No: Fax No: GERMANY Farnell Tel No: Fax No: NETHERLANDS Farnell Tel No: Fax No: SWITZERLAND Farnell Tel No: Fax No: BRAZIL Tel No: Fax No: HONG KONG Tel No: Fax No: NEW ZEALAND Farnell Tel No: Fax No: UK Farnell Tel No: Fax No: CHINA Tel No: Fax No: HUNGARY - Farnell NORWAY Farnell Tel No: Fax No: UK CPC CZECH REPUBLIC - Farnell INDIA - Farnell PORTUGAL Farnell Tel No: Fax No: USA Newark Tel No: DENMARK Farnell Tel No: Fax No: IRELAND Farnell Tel No: Fax No: RUSSIA Farnell export EXPORT Farnell Tel No: Fax No: For enquiries from all other markets ESTONIA Farnell Tel No: Fax No: ISRAEL Farnell Tel No: Fax No: SINGAPORE Tel No: Fax No: Disclaimer This data sheet and its contents (the "Information") belong to the Premier Farnell Group (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. SPC Multicomp is the registered trademark of the Group. Premier Farnell plc Page <5> 26/07/08 V1.1
1N47- Series DO-41. Mechanical Data. Page <1> 18/07/08 V1.1
Features: Low profile package. Built-in strain relief. Glass passivated junction. Low inductance. Typical I R less than 5.0µA above 11V. High temperature soldering guaranteed: 260 C/10 seconds at terminals
CM and SB Series Single Phase Bridge Rectifiers
Features: Electrically isolated metal case for maximum heat dissipation. Metal case with an electrically isolated mylar. Rating to 0 Volts PRV. Ampere surge capability. High efficiency. Mounting: Through
HMV Series Ceramic Cased Wirewound Resistors
Features: Especially designed for crowded PCB's. Ceramic stand-off's act as heatsink. Vertical mounting ceramic cased wirewound resistors. Physical Configuration Type Power Rating at 70 C W Dimensions
SMA Series - Crimp Plug and Jack
Plug Features: SMA connectors are semi-precision, subminiature devices that provide repeatable electrical performance. These devices offer broadband performance with low reflection. These properties, along
Transient Voltage Suppressor
Features: Glass Passivated Junction Low Incremental Surge Resistance, Excellent Clamping Capability Low Profile Package With Built-In Strain Relief for Surface Mounted Applications 600W Peak Pulse Power
Voltage Regulator Example Ying Sun
Voltage Regulator Example Ying Sun Voltage Regulator Circuit Vin is 9V. We want to regulate Vout at 5V. We use a zener diode of 3.3 V as shown in the attached data sheet. 1) Determine R1. R1 provides the
SM320A~SM3200A SCHOTTKY DIODE REVERSE VOLTAGE 20 TO 200V FORWARD CURRENT 3.0A
320A~3200A DESCRIPTION The 320A~3200A are available in A Package. ORDERING INFORMATION Package Type Part Number 320A 340A 360A 380A A 3100A 3120A 3150A 3200A Note 5,000pcs/Reel AiT provides all RoHS Compliant
Fast Acting PTC Resettable Fuse SMD - Case Style 0603
Features: Compact design to save board space-0603 footprint. Small size results in very fast time to react to fault events. Low profile. Halogen free. Applications: USB port protection. PC motherboards
Surface Mountable PTC Resettable Fuse
Specifications: Applications : All high-density boards Product Features : Small surface mountable, Solid state, Faster time to trip than standard SMD devices, Lower resistance than standard SMD devices
Transient Voltage Suppressor
Features: Optimized for LAN Protection Applications Low Profile Package With Built-In Strain Relief For Surface Mounted Applications Low Incremental Surge Resistance, Excellent Clamping Capability 400W
BAT42W/BAT43W SURFACE MOUNT SCHOTTKY BARRIER DIODE
Features: Low Turn-on Voltage Fast Switching PN Junction Guard Ring Transient and ESD Protection Designed for Surface Mount Application Plastic Material UL Recognition Flammability Classification 94V-O
Single-Phase 6.0A Glass Passivated Bridge Rectifier
0 Single-Phase 6.0A Glass Passivated Bridge Rectifier 0 Features D3K Glass passivated die construction Low forward voltage drop High current capability High surge current capability Designed for surface
SMP75. Trisil for telecom equipment protection. Features. Description. Applications. Benefits
Trisil for telecom equipment protection Features bidirectional crowbar protection voltage: 8 V low leakage current: I R = 2 µa max holding current: I H = 15 ma min repetitive peak pulse current: I PP =
Thick Film Chip Resistor
Features: Small size and light weight. Highly reliable multilayer electrode construction. Compatible with all soldering process. Applications: Telecommunication equipments. Radio and tape recorders, TV
Multilayer Chip Varistors
Features: Multilayer fabrication technology. -55 C to 125 C operating temperature range. Operating voltage range V M (DC) at 5.5V to 85V. Able to withstand ESD test of IEC-61000-4-2. Bi-directional clamping
SMP30. Trisil for telecom equipment protection. Features. Applications. Description. Benefits
SMP3 Trisil for telecom equipment protection Features Bidirectional crowbar protection Voltage range from 62 V to 27 V Low capacitance from 1 pf to 2 pf typ.@ 5 V Low leakage current: I R = 2 µa max. Holding
High Power Resistors HP03 Series
Features High power in standard size Suitable for both wave and reflow soldering Application: AV adapters, LCD back light, Camera strobe Shipped in reels of 5K Specification Table Type : MCHP03 Power Rating
Surface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V WM (uni-directional) 5.8 V to 459 V V WM (bi-directional) 5.8 V to 185 V V BR (uni-directional) 6.8 V to 540 V V BR (bi-directional)
Power Metal Fixed Resistors
Type Designation: (EX.) The type designation shall be in the following form: Type Power Rating Resistance Tolerance Nominal Resistance MCPMR 2W-S J 100 KΩ Ratings: Ratings shall be shown in the table 1
PMEG2010EH; PMEG2010EJ; PMEG2010ET
PMEG200EH; PMEG200EJ; PMEG200ET Rev. 04 20 March 2007 Product data sheet. Product profile. General description Planar Maximum Efficiency General Application (MEGA) Schottky barrier rectifiers with an integrated
500mW, 2% Tolerance SMD Zener Diode
500mW, 2% Tolerance SMD Zener Diode FEATURES - Wide zener voltage range selection : 2.4V to 75V - Surface mount device type - Moisture sensitivity level - Pb free and RoHS compliant - V Z Tolerance Selection
Obsolete Product(s) - Obsolete Product(s)
8 line low capacitance EMI filter and ESD protection Main product characteristics Where EMI filtering in ESD sensitive equipment is required: LCD and camera for mobile phones Computers and printers Communication
BZD17C SERIES Taiwan Semiconductor
0.8W, 11V - 220V Voltage Regulator Diodes FEATURES - Silicon zener diodes - Low profile surface-mount package - Zener and surge current specification - Low leakage current - Excellent stability - Compliant
EMIF02-MIC01F2 2-line IPAD, EMI filter including ESD protection Features Application Description Complies with the standards:
2-line IPAD, EMI filter including ESD protection Features 2-line symetrical low-pass filter Lead-free package High-density capacitor High-efficiency EMI filtering Very small PCB footprint: 1.42 mm x 1.92
EMIF01-SMIC01F2 IPAD. Single line EMI filter including ESD protection. Main application. Description. Benefits. Pin configuration (Bump side view)
IPAD Single line EMI filter including ESD protection Main application Single ended microphone in mobile phones and portable devices Description The is a highly integrated device designed to suppress EMI/RFI
Z1SMA4736A Z1SMA4757A
1W Surface Mount Zener Diodes Features For surface mounted applications in order to optimize board space Built-in strain relief Glass passivated junction Low inductance High temperature soldering guaranteed:
ESDA25LY Automotive dual Transil array for ESD protection Features Applications Description Benefits
Automotive dual Transil array for ESD protection Features 2 Unidirectional Transil functions Low leakage current: 1 µa @ 24 V 300 W peak pulse power (8/20 µs) Benefits High ESD protection level: up to
In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.
Important notice Dear Customer, On 7 February 207 the former NXP Standard Product business became a new company with the tradename Nexperia. Nexperia is an industry leading supplier of Discrete, Logic
TSZL52C2V4 thru TSZL52C39 Taiwan Semiconductor. SMD Zener Diode. Small Signal Product FEATURES MECHANICAL DATA
SMD Zener Diode FEATURES - Wide zener voltage range selection : 2.4V to 39V - Designed for mounting on small surface - Extremely thin / leadless package - Packing code with suffix "G" means green compound
PMURA2J / MURB2J / MUR260K
SUPERFAST RECOVERY RECTIFIERS Voltage 600 V Current 2 A Features Superfast recovery times-epitaxial construction Low forward voltage, high current capability Hermetically sealed. Low leakage High surge
Molded plastic body over glass passivated junction Plated axial leads, solderable per MIL-STD-750, Method 2026
T6L Features Stand-off voltage from 5.0 to 250 volts Glass passivated junction 5000W Peak Pulse Power capability on 10/1000μs waveform repetition rate(duty cycle): 0.05% Fast response time: typically less
Multilayer Chip Varistors
Features: Multilayer fabrication technology -55 to 125 C operating temperature range Operating voltage range VM (DC) at 5.5 V to 85 V Able to withstand ESD test of IEC-61000-4-2 Bi-directional clamping
SZAF5.1A~SZAF220A ZENER DIODE 1.5W
DESCRIPTION The are available in SMAF Package ORDERING INFORMATION Package Type Part Number SZAF5.1A SZAF36A SZAF5.6A SZAF39A SZAF6.2A SZAF43A SZAF6.8A SZAF47A SZAF7.5A SZAF51A SZAF8.2A SZAF56A SZAF9.1A
TELECOM EQUIPMENT PROTECTION: TRISIL
SMP1LC-xxx TELECOM EQUIPMENT PROTECTION: TRISIL FEATURES Bidirectional crowbar protection Voltage range from 8V to 262V Low capacitance from 3 pf to 45pF typ @ 5V Low leakage current : I R =2µA max Holding
High Power Density Surface Mount TRANSZORB Transient Voltage Suppressors
High Power Density Surface Mount TRANSZORB Transient Voltage Suppressors DO-214AA (SMB J-Bend) PRIMARY CHARACTERISTICS V BR (uni-directional) 6.4 V to 49.1 V V BR (bi-directional) 6.4 V to 49.1 V V WM
Duplex Fibre Patchcords
Patchcord, Fibre, Duplex, ST-ST, OM1 Connector Type ST/MM ST/MM Material Zn Alloy Zn Alloy Colour - - Diameter 2.5 mm 2.5 mm Connection at Cable Crimp Crimp Connection at Adapter Twist - Lock Bayonet Twist
ESDA6V1-4BC6 QUAD BIDIRECTIONAL TRANSIL SUPPRESSOR FOR ESD PROTECTION ASD
ASD ESDA6V1-4BC6 QUAD BIDIRECTIONAL TRANSIL SUPPRESSOR FOR ESD PROTECTION MAIN APPLICATIONS Where transient overvoltage protection in ESD sensitive equipment is required, such as: Computers Printers Communication
PMEG3015EH; PMEG3015EJ
Rev. 03 13 January 2010 Product data sheet 1. Product profile 1.1 General description Planar Maximum Efficiency General Application (MEGA) Schottky barrier rectifiers with an integrated guard ring for
BZW04-5V8 thru BZW TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES TYPICAL APPLICATIONS
TRANSZORB Transient Voltage Suppressors DO-41 (DO-204AL) FEATURES Glass passivated chip junction Available in uni-directional and bi-directional 400 W peak pulse power capability with a 10/0 μs waveform,
In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.
Important notice Dear Customer, On 7 February 2017 the former NXP Standard Product business became a new company with the tradename Nexperia. Nexperia is an industry leading supplier of Discrete, Logic
PMEG1030EH; PMEG1030EJ
Rev. 04 15 January 2010 Product data sheet 1. Product profile 1.1 General description Planar Maximum Efficiency General Application (MEGA) Schottky barrier rectifiers with an integrated guard ring for
2M6.8Z - 2M200Z Taiwan Semiconductor
2W, 6.8V - 200V Glass Passivated Junction Silicon Zener Diodes FEATURES - Glass passivated chip junction - Typical I R less than μa - Compliant to RoHS Directive 20/65/EU and in accordance to WEEE 2002/96/EC
In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.
Important notice Dear Customer, On 7 February 2017 the former NXP Standard Product business became a new company with the tradename Nexperia. Nexperia is an industry leading supplier of Discrete, Logic
Low forward voltage Ultra small SMD plastic package Low capacitance Flat leads: excellent coplanarity and improved thermal behavior
Rev. 02 15 January 2010 Product data sheet 1. Product profile 1.1 General description Planar Schottky barrier triple diode with an integrated guard ring for stress protection. Three electrically isolated
Metal Film Precision Resistors CSR Series
Features Excellent overall stability Tight tolerance down to ±0.1% Extremely low TCR down to ±10 PPM/ C High power rating up to 1 Watts Applications Automotive Telecommunication Medical Equipment Measurement
In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.
Important notice Dear Customer, On 7 February 2017 the former NXP Standard Product business became a new company with the tradename Nexperia. Nexperia is an industry leading supplier of Discrete, Logic
EMIF02-SPK02F2. 2-line IPAD, EMI filter and ESD protection. Features. Application. Description. Complies with the following standards
2-line IPAD, EMI filter and ESD protection Datasheet production data Features Packaged in lead-free Flip Chip Very low resistance: 0.35 Ω High attenuation: -45 db at 900 MHz Very low PCB space consumption:
0201 Thick Film Chip Resistor
Features: Small size and light weight Highly reliable multilayer electrode construction Compatible with all soldering process Applications: Telecommunication Equipments Radio and Tape Recorders, TV Tuners
EMIF M16. 8-line IPAD low capacitance EMI filter and ESD protection in micro QFN package. Features. Description.
8-line IPAD low capacitance EMI filter and ESD protection in micro QFN package Features EMI (I/O) low-pass filter High efficiency in EMI filtering: Greater than 30 db attenuation at frequencies from 900
Thick Film Chip Resistor
Power Rating: Ratings: Type 1206 Power Rating Max. Working Voltage Max. Overload Voltage Temperature Range 0.125W (1/8W) 200V 400V Ambient Temperature 70 C -55 C to +155 C Resistors shall have a power
Resistor Kit CFR 1/4 W 5% (2.5 x 6.8)
Specifications: Kit No : 1171087 E12 Series = 85 values Quantity : 100 pieces per value Total Quantity : 8,500 pieces Ratings: Ratings shall be shown in the table 1. Power Rating: Type CR Rated Power 0.25W
500mW, 5% Tolerance SMD Zener Diodes
500mW, 5% Tolerance SMD Zener Diodes FEATURES Wide Zener voltage range selection: 2.4V to 75V V Z tolerance selection of ± 5% Compliant to RoHS directive 2011/65/EU and in accordance to WEEE 2002/96/EC
ESDAxxSCx. Quad Transil array for ESD protection. Features. Applications. Description. Benefits. Complies with the following standards:
Quad Transil array for ESD protection Features 4 unidirectional Transil Functions Low leakage current: I R max. < 20 µa at V RM 400 W peak pulse power (8/20 µs) Benefits High ESD protection level: up to
Surface Mount Silicon Zener Diodes
FEATURES CREAT BY ART - Low profile package - Ideal for automated placement - Glass passivated junction - Built-in strain relief - Low inductance - Typical IR less than 0.5μA above 11V - ESD Rating of
Silicon 5 Watt Zener Diodes
Compliant Silicon 5 Watt Zener Diodes DESCRIPTION The 1N5334Be3 through IN5388Be3 JEDEC registered series of axial-leaded 5.0 watt Zeners provides a voltage selection of 3.6 V to 200 V with different tolerances
500mW, 2% Tolerance Zener Diodes
500mW, 2% Tolerance Zener Diodes FEATURES Wide zener voltage range selection: 2.4V to 75V V Z tolerance selection of ± 2% Compliant to RoHS directive 2011/65/EU and in accordance to WEEE 2002/96/EC Halogen-free
Technical Overview. Key Features
Agilent P94xA/C Solid State PIN Diode Switches P942A 1 MHz to 8 GHz SPDT PIN switch P942C 1 MHz to 18 GHz SPDT PIN switch P944A 1 MHz to 8 GHz SP4T PIN switch P944C 1 MHz to 18 GHz SP4T PIN switch Technical
Continental Device India Limited
5W AXIAL LEAD ZENER DIODES Axial Lead Plastic Package Features 1). Silicon Planar Power Zener Diodes. 2). For use in Stabillizing and Clipping Circuits with High Power Rating. 3). Standard Zener Voltage
AN2408 Application note
Application note 900mA standalone linear Li-Ion battery charger with thermal regulation Introduction One way to minimize the size and complexity of a battery charger is to use a linear-type charger. The
In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.
Important notice Dear Customer, On 7 February 2017 the former NXP Standard Product business became a new company with the tradename Nexperia. Nexperia is an industry leading supplier of Discrete, Logic
PESD5V0U2BT. 1. Product profile. Ultra low capacitance bidirectional double ESD protection diode. 1.1 General description. 1.
Ultra low capacitance bidirectional double ESD protection diode Rev. 01 27 March 2007 Product data sheet 1. Product profile 1.1 General description Ultra low capacitance bidirectional double ElectroStatic
EV-VNQ5E050AK VNQ5E050AK evaluation board
VNQ5E050AK evaluation board Data brief production data Features Parameter Symbol Value Unit Max supply voltage V CC 41 V Operating voltage range V CC 4.5 to 28 V Max On-State resistance R ON 50 mω Current
EMIF M8. 4-line IPAD low capacitance EMI filter and ESD protection in micro QFN package. Features. Applications. Description
4-line IPAD low capacitance EMI filter and ESD protection in micro QFN package Features EMI symmetrical (I/O) low-pass filter High efficiency in EMI filtering: -34 db at frequencies from 900 MHz to 1.8
S3N 3 A, 1200 V Surface Mount Rectifier
S3N 3 A, 1200 V Surface Mount Rectifier Features Low-Profile Package Glass-Passivated Junction High Breakdown Voltage Rating UL Flammability Classification: 94V-0 August 2013 ELECTRICAL SYMBOL SMC/DO-214AB
500mW, 5% Tolerance SMD Zener Diodes
500mW, 5% Tolerance SMD Zener Diodes FEATURES Wide zener voltage range selection: 2.4V to 75V V Z tolerance selection of ± 5% Surface mounting device (SMD) type Moisture sensitivity level: level, per J-STD-020
500mW, 5% Tolerance SMD Zener Diodes
500mW, 5% Tolerance SMD Zener Diodes FEATURES Wide zener voltage range selection: 2.4V to 5V V Z tolerance selection of ± 5% Moisture sensitivity level: level, per J-STD-020 Compliant to RoHS directive
Low forward voltage Ultra small SMD plastic package Low capacitance Flat leads: excellent coplanarity and improved thermal behavior.
Rev. 01 14 September 2004 Product data sheet 1. Product profile 1.1 General description Planar Schottky barrier triple diode with an integrated guard ring for stress protection. Three electrically isolated
EVAL6235PD. L6235 three-phase brushless DC motor driver demonstration board. Features. Description
L6235 three-phase brushless DC motor driver demonstration board Features Operating supply voltage from 8 V to 52 V 5.6 A output peak current (2.8 A RMS ) Operating frequency up to 100 khz Non-dissipative
SOD123. Top View. Date Code Key Year Code A B C D E H I J K L
SURFACE MOUNT ZENER DIODE Features Mechanical Data Planar Die Construction 5mW Power Dissipation General Purpose, Medium Current Ideally Suited for Automated Assembly Processes Totally Lead-Free & Fully
SOT23-6L ESDALCL6-2SC6
Very low capacitance and low leakage current ESD protection Features 2 data-line protection Datasheet production data Protects V BUS Very low capacitance: 2.5 pf typ. Very low leakage current: 10 na at
USB6B1 DATA LINES PROTECTION. Application Specific Discretes A.S.D.
Application Specific Discretes A.S.D. DATA LINES PROTECTION APPLICATIONS Where transient overvoltage protection in sensitive equipment is required, such as: - Universal Serial Bus ports - RS-423 interfaces
In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.
Important notice Dear Customer, On 7 February 2017 the former NXP Standard Product business became a new company with the tradename Nexperia. Nexperia is an industry leading supplier of Discrete, Logic
Dual back-to-back Zener diode
Rev. 01 28 January 2008 Product data sheet 1. Product profile 1.1 General description in a SOD323 (SC-76) very small Surface-Mounted Device (SMD) plastic package. 1.2 Features Non-repetitive peak reverse
Items exceeding one or more of the maximum weight and dimensions of a flat. For maximum dimensions please see the service user guide.
Rate Card International Flats Effective from 2 April 2013 Pricing your mail Once you have selected the service you wish to use, calculate the price using the tables on the following pages. For more information
P1SMA5914-AU ~ 1SMA5945-AU Series
SILICON ZENER DIODE oltage 3.6~68 Power 1.5 W Features Silicon planar Zener diode Low profile surface-mount package Low leakage current Excellent stability High temperature soldering: 260 o C/ seconds
In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.
Important notice Dear Customer, On 7 February 2017 the former NXP Standard Product business became a new company with the tradename Nexperia. Nexperia is an industry leading supplier of Discrete, Logic
EMIF M6. 2 line IPAD, EMI filter and ESD protection in Micro QFN package. Features. Applications. Description. Complies with following standards
2 line IPAD, EMI filter and ESD protection in Micro QFN package Features Dual line EMI symmetrical (I/O) low-pass filter High efficiency in EMI filtering Very low PCB space consumption: 1.0 mm x 1.45 mm
MCC. Revision: /06/09 1N5338B THRU 1N5369B
Features Zener Voltage From 5.V to 5V Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 For Available Tolerances See Note Marking : Cathode band and type number Maximum Ratings:
EMIF03-SIM02M8. 3 line IPAD, EMI filter for SIM card applications. Features. Applications. Description. Complies with following standards
3 line IPAD, EMI filter for SIM card applications Features SIM card EMI low-pass filter High efficiency in EMI filtering Very low PCB space consumption: 1.7 mm x 1.5 mm Very thin package: 0.6 mm max High
In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.
Important notice Dear Customer, On 7 February 2017 the former NXP Standard Product business became a new company with the tradename Nexperia. Nexperia is an industry leading supplier of Discrete, Logic
International Packets
Rate Card International Packets Effective from 2 April 2013 Pricing your mail Once you have selected the service you wish to use, calculate the price using the tables on the following pages. For more information
MCC SMA2EZ5.1D5 THRU SMA2EZ75D5. Features. 2 W Glass Passivated Junction Silicon Zener Diode Volts.
Features Mechanical Data TERMINALS : Solder plated, solderable per MIL-STD-7, method 6 POLARITY : Color band denotes positive end (cathode) omponents 76 Marilla Street Chatsworth!"# $%!"# Lead Free Finish/Rohs
In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.
Important notice Dear Customer, On 7 February 2017 the former NXP Standard Product business became a new company with the tradename Nexperia. Nexperia is an industry leading supplier of Discrete, Logic
Maximun Ratings and Electrical Characteristics at 25 C
, FB25, FB35,, Power - Power L Voltage Current 50 to 1000 V 15-25-35-40-50 A FEATURES High case dielectric strength High forward surge current capability UL recognition file number E320541, Vol. 2. Universal
5KP_A. VRM : Volts PPK : 5000 Watts MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Features 5000W Peak Pulse Power Excellent clamping capability Low incremental surge resistance Fast response time : typically less then 1.0 ps from 0 volt to VBR(min) Typical IR less then 1μA above 10V
TOSHIBA Schottky Barrier Rectifier Schottky Barrier Type CMS05
CMS5 TOSHIBA Schottky Barrier Rectifier Schottky Barrier Type CMS5 Switching Mode Power Supply Applications Portable Equipment Battery Applications Unit: mm Repetitive peak reverse voltage : V RRM = 3
SOD123F (Type B) Top View. Part Number Compliance Case Packaging (Type Number)-7* AEC-Q101 SOD123F (Type B) 3,000/Tape & Reel
SURFACE MOUNT ZENER DIODE Features Flat Lead Package Design for Low Profile and High Power Dissipation Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. Green Device (Note
Features. Case Material: Molded Plastic, Green Molding Compound. Computers and Peripheral
LOW CAPACITANCE BIDIRECTIONAL TVS DIODE Product Summary V BR (Min) I PP (Max) C T (Typ) 15V 9A 2pF Description This new generation TVS is designed to protect sensitive electronics from the damage due to
CZRB5338B-HF Thru. CZRB5388B-HF Voltage: 5.1V to 200V Power: 5 W RoHS Device Halogen Free
CZRB5338B-HF Thru. CZRB5388B-HF Voltage: 5.1V to 200V Power: 5 W RoHS Device Halogen Free Features - Glass passivated chip - Low leakage - Built-in strain relief - Low inductance - High peak reverse power
Maximun Ratings and Electrical Characteristics at 25 C
SOD123W Voltage Power Dissipation 9.1 to 220 V 1 W FEATURE Low profile package Ideal for automated placement Low leakage current High surge current and zener capability Low differential resistance Low
In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.
Important notice Dear Customer, On 7 February 2017 the former NXP Standard Product business became a new company with the tradename Nexperia. Nexperia is an industry leading supplier of Discrete, Logic
500 mw SURFACE MOUNT ZENER DIODES
Available on commercial versions 0 mw SURFACE MOUNT ZENER DIODES DESCRIPTION Screening in reference to MIL-PRF-190 available The 1N4678UR-1 thru 1N4717UR-1 series of 0.5 watt glass surface mount DO-213AA
ESDA25B1 TRANSIL ARRAY FOR ESD PROTECTION. Application Specific Discretes A.S.D. I/O 6 I/O 1 I/O 2 I/O 5
Application Specific Discretes A.S.D. ESDA25B TRANSIL ARRAY FOR ESD PROTECTION APPLICATIONS Where transient overvoltage protection in ESD sensitive equipment is required, such as : - COMPUTER - PRINTERS
In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.
Important notice Dear Customer, On 7 February 2017 the former NXP Standard Product business became a new company with the tradename Nexperia. Nexperia is an industry leading supplier of Discrete, Logic
ACZRC5340B-G Thru. ACZRC5388B-G Voltage: 6.0 to 200 Volts Power: 5 Watts RoHS Device
CZRC5340B-G Thru. CZRC5388B-G Voltage: 6.0 to 200 Volts Power: 5 Watts RoHS Device Features - Glass passivated chip. - Low leakage. - Built-in strain relief. - Low inductance. - High peak reverse power
Han R 23. Circular Connector. Certified acc. to DIN EN ISO 9001 in design/ development, production, installation and servicing.
Circular Connector Certified acc to DIN EN ISO 9001 in design/ development, production, installation and servicing Data Sheet 0039-4 Circular Connectors Features Size R 23 Outer diameter 26 mm High contact
LD A very low drop adjustable positive voltage regulator. Description. Features
7 A very low drop adjustable positive voltage regulator Description Datasheet - production data Features P ² PAK Output current limit Low-dropout voltage: typically 400 mv at 7 A output current Output
1N5333B Series. 5 Watt Surmetic 40 Zener Voltage Regulators
Preferred Device Watt Surmetic 40 Zener Voltage Regulators This is a complete series of Watt Zener diodes with tight limits and better operating characteristics that reflect the superior capabilities of
Total power dissipation: 500 mw Small plastic package suitable for surface-mounted design Wide working voltage range Low differential resistance
Rev. 01 27 January 2010 Product data sheet 1. Product profile 1.1 General description General-purpose Zener diodes in a SOD123F small and flat lead Surface-Mounted Device (SMD) plastic package. 1.2 Features
In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.
Important notice Dear Customer, On 7 February 2017 the former NXP Standard Product business became a new company with the tradename Nexperia. Nexperia is an industry leading supplier of Discrete, Logic