BEEBOX User Manual. Version:

Transcription

1 BEEBOX BEEBOX User Manual Version: / 6

2 BEEBOX Contents 1. Interface Description Quick Installation Instruction Menu Frame... 4 a. Enter Menu:... 4 b. Exit Menu: Detailed Instructions & Introduction... 5 a. Status & Awakening of Menu... 5 b. First-level Menu Work Status... 5 c. First-level Menu Settings... 6 d. First-level Menu About Network / 6

3 BEEBOX 1. Interface Description The Interface port check as below: Network Antenna 485 Port (Standby) USB Power 2. Quick Installation Instruction 1. Insert the network cable and power cable as shown above, wait for the long bright of red LED and flashing green LED; 2. Time Zone Settings: Press MENU button to wake up the LCD screen, press OK button to enter the first-level menu, press UP or DOWN button to find Settings and press OK button, press UP or DOWN button to find Time Zone, and press UP or DOWN to set up, press OK to save setting. 3. Check the Network: Press MENU button to wake up the LCD screen, press OK button to enter the first-level menu, press UP or DOWN button to find About Network and press OK button to check the IP Address. 3 / 6

4 3. Menu Frame BEEBOX Main Menu Work Status Settings About Network Today s Energy NULL Total Energy NULL Unit ID Software Version HCI Version RS485 Device(s) SD card state Display Date Display Time Send & get period Time Zone Time & Date IP Address NetWork Type Wifi Config Reboot Test Hardware Clear Data Factory Reset POWER ON Optmzr Display IP Net Status Static/Auto IP MAC ID Send Period Get Period 485 Port No. / / / a. Enter Menu: Find the targeted menu through UP and DOWN button, press OK button to enter the menu. For example: to check the current IP address of local device, user needs to find Display IP by Menu Frame mentioned above. Find the targeted menu About Network by UP and Down button, and press OK button. The first line of LCD screen will show Display IP, the second line will show IP address of current device once the Network cable connects well and be online. Otherwise the second line shows Disconnected!. b. Exit Menu: Press MENU button to return to the previous menu. System will inquire about the confirmation of exiting if user saves certain settings, press yes to save and then exit the current menu. 4 / 6

5 BEEBOX 4. Detailed Instructions & Introduction a. Status & Awakening of Menu LCD screen does not show any subtitle when it processes normal start, the backlight turns off, steady long-bright red LED and flashing green LED shown as picture below. To wake up operation interface, user press MENU button, and Ok button to enter Main Menu. Press UP and DOWN button to switch the 3 First-level menus: Work Status, Settings, About Network. b. First-level Menu Work Status The First-level Work Status has 9 sub-menus shown as below, it is for the operating status checking. Definition Summary Today s Energy NULL Today s Energy Total Energy NULL Total Energy Unit ID Unit ID Software Version Software Version HCI Version Human Computer Interface Version RS485 Device(s) The No. of RS485device(s) 5 / 6

6 SD card state Display Date Display Time BEEBOX SD card state Display Date Display Time c. First-level Menu Settings The First-level Menu Settings has 11 sub-menus, one of them namely Send & get period has 3 third-level menus. The full functions and summaries are listed below. Definition Function Summary Send & get period Setup the Send & get To setup data acquisition time and period RS485 port Time Zone Setup time zone / Time & Date Setup Time & Date / IP Address Setup IP address To setup the static IP address NetWork Type network connection type Internet Cable or wifi Wifi Config Wifi setup Setup the wifi and password Reboot Reboot / Test Hardware Hardware testing Test the button and RS485 Clear Data Delete data / Factory Reset Factory Reset / POWER ON Optmzr Power on optimizer / Definition Function Summary Send Period Setup data sending Can be set as 5s 10s 20s 30s period 60s 90s 120s 180s 300s Get Period Setup data getting period Can be set as 5s 10s 20s 30s 60s 90s 120s 180s 300s 485 Port No. Setup RS485 Ports 3 ports can be chosen d. First-level Menu About Network First-level menu About Network has 4 sub-menus listed below: Definition Summary Display IP Display current IP Address Net Status Display the connection status of network Static/Auto IP Network Model: Static & Dynamic models MAC ID Display the MAC of network 6 / 6

7 Hosola Plus Series Power Optimiser High Efficiency Up to 25% more energy and superior efficiency (99.5%) Efficiency step-up and step-down processing modules can flexibly configure PV panel structure Mitigates all types of module mismatch losses, from manufacturing tolerance to partial shading High Safety Standards Module-level voltage shutdown for installer and firefighter safety Comprehensive protection functions like protection against overheat IP65 design, reliable under harsh weather condition 25 years lifetime Advanced Communication Technology WiFi/RS485 accessible Real-time yield monitoring of the optimiser and each panel, alarming in time Flexible Installation Installation for either newly setup or existed power station, supports multiple installation methods Simplifies system design by eliminating power optimiser selection process Portable design, fast installation Operation with any inverter and no additional hardware or addition of Hosola inverter for added benefits TÜV SÜD certification, Conform the corresponding European standards.

8 Hosola New Energy Co.,Ltd. Phone: Fax: Website: Address: 1-A1F,No.328 Xinghu Road, Suzhou Industrial Park,China, Hosola Power Optimiser Technical Data Safety Standards High Quality High Efficiency Low Noise Model Plus 300 Plus 350 Plus 600-D Plus 700-D Input Data Max.DC Input Power(W) Max. DC Voltage [V] Operating Voltage Range [V] MPPT Voltage Range [V] 16~50 16~50 16~50 16~50 Max. DC current [A] No. of MPPT Output data Rated AC power [W] Max. AC Power [W] Max. AC Current [A] Rated AC Voltage Range [V] 0~60 0~60 0~120 0~120 Efficiency Max. efficiency 99.5% 99.5% 99.5% 99.5% Euro efficiency 98.5% 98.5% 98.5% 98.5% MPPT efficiency 99.9% 99.9% 99.9% 99.9% General data Weight [g] Dimension(W*H*D)[mm] 115*106*22 115*106*22 115*106*22 115*106*22 Operating Temperature Range[ C/ F] -40 ~+85 IP protection type IP 65 Isolation type Transformerless Cooling Natural cooling Communication RWiFi(Optional) Standard warranty (years) 5/10 (Optional) Certificates CQC / TUV / CSA

9 Hosola Power Optimiser Module Embedded Solution 3K TL 10 pieces 280W panels connected in series (without power optimiser) 3K TL 10 pieces 280W panels connected in series (with power optimiser) with power optimiser with power optimiser Panels before shadowing Panels after shadowing Conditions Series current A Instantaneous power W Series current A) Instantaneous power W No.1 without power optimiser No.2 with power optimiser Conclusion: When solar panels face shadow or the angle is diverse, adding power optimiser can effectively improve generating capacity, and the system generating amount is increased by 80%. Compared with micro inverter, the price of power optimiser is 40% lower. 3