MATERI TRAINING KWH METER EDMI. By PT EDMI Indonesia

Transcription

1 MATERI TRAINING KWH METER EDMI By PT EDMI Indonesia

2 TYPE KWH METER EDMI YANG DIPASARKAN DI INDONESIA 1. ATLAS SERIES MK10 CLASS 1 3. GENIUS SERIES Plus MK6E CLASS GENIUS SERIES MK6 CLASS 1 4. GENIUS SERIES MK6N CLASS 0.5

3 ATLAS SERIES MK10A Active Energy (kwh) class: 1 ( IEC , IEC ) Reactive Energy (kvarh) class: 2 ( IEC ) Nominal voltage: 230/400V Operating Range : 140 / 290 Frequency: Hz CT range: 1/6A, 5/20A, 5/100A Measurement modes: 3 phase 4 wire Measured energy: 4 quadrant (full quadrant) Pulsing output voltage: 240Vac/dc (current 0.1A maximum) Pulsing input passive voltage: 5V,12V,48V,110V,240V ac/dc Pulsing input active Voltage: 5V,up to 6 I/O Total (Up to 2 inputs, 6 outputs ) Communication: ANSI type 2 optical, IEC 61107, RS 232, for Modems connection (GSM/PSTN/CDMA/GPRS etc),rs 485 multi drop (2 or 4 wire, RJ 45 or screw terminal) MV90, UDP, IP,PPP/GPRS capable Temperature range: operating (-40 to 70C), storage (-40 to 85C) Time Of Use: 8 rates plus unified rates, up to 32 separate import and export register up to 200 programmable special days13 previous periods, block or rolling maximum demand Load Survey: Up to 32 channels (interval programmable from 1-60 min), over 1800 days (5 years) storage ( 1 channel, 30 minute interval), 2 independent survey, Energy, instantaneous reading, pulsing input as channel sources, ability to store average/minimum/maximum values for internal duration. Backup Type : Lithium Battery LCD display: 7 Segment LCD Sag/Swell record Equipment Failure Alarms (EFAs)

4 GENIUS SERIES MK6 Active Energy (kwh) Accuracy class: 1 (IEC ) Reactive Energy (kvarh) Accuracy class: 2s (IEC ) Nominal voltage: V (phase to neutral) Frequency: Hz CT range: 5/20A Auxiliary supply: 240V, 110V (others available on special order) Measurement modes: 3 phase 3 wire or 3 phase 4 wire Measured energy: 4 quadrant (full quadrant) Pulsing output voltage: 5-220Vdc, Vac (current 0.1A maximum) Pulsing input voltage: 5, 12, 48, 110, 240V ac/dc Communication: ANSI type 2 optical, IEC 61107, RS-232, RS- 485(2 or 4 wire multidrop), SCADA, Modems (GSM/PSTN/CDMA/GPRS etc), MV90, MODBUS, PPP/GPRS, DNP3, Master/slave communications accessed through one master gateway meter Temperature range: operating (-10 to 60C), storage (-40 to 85C) Time Of Use: 8 rates plus unified rates, 13 previous periods, block or rolling maximum demand Load Survey: Up to 50 channels (interval programmable from 1 second to 1 month) LCD display: 16 character by 2 line alphanumeric display Waveform capture (Harmonic analysis to the 50 harmonics) Equipment Failure Alarms (EFAs): Self checks, tamper and wiring checks (turn on an LED, LCD indicator, relay output, or trigger to send SMS)

5 GENIUS SERIES MK6N Active Energy (kwh) Accuracy class: 0.5 (IEC ) Reactive Energy (kvarh) Accuracy class: 2 (IEC ) Nominal voltage: V (phase to neutral) Frequency: Hz CT range: 5/20A Auxiliary supply: 240V, 110V (others available on special order) Measurement modes: 3 phase 3 wire or 3 phase 4 wire Measured energy: 4 quadrant (full quadrant) Pulsing output voltage: 5-220Vdc, Vac (current 0.1A maximum) Pulsing input voltage: 5, 12, 48, 110, 240V ac/dc Communication: ANSI type 2 optical, IEC 61107, RS-232, RS- 485(2 or 4 wire multidrop), SCADA, Modems (GSM/PSTN/CDMA/GPRS etc), MV90, MODBUS, PPP/GPRS, DNP3, Master/slave communications accessed through one master gateway meter Temperature range: operating (-10 to 60C), storage (-40 to 85C) Time Of Use: 8 rates plus unified rates, 13 previous periods, block or rolling maximum demand Load Survey: Up to 50 channels (interval programmable from 1 second to 1 month) LCD display: 16 character by 2 line alphanumeric display Waveform capture (Harmonic analysis to the 50 harmonics) Equipment Failure Alarms (EFAs): Self checks, tamper and wiring checks (turn on an LED, LCD indicator, relay output, or trigger to send SMS)

6 GENIUS SERIES MK6E Class 0.2 Active Energy (kwh) Accuracy class: 0,2 (IEC , ) Reactive Energy (kvarh) Accuracy class: 2s (IEC ) Nominal voltage: V (phase to neutral) Frequency: Hz CT range: 1/4A & 5/20A Auxiliary supply: 240V, 110V (others available on special order) Measurement modes: 3 phase 3 wire ( 2 element ) or 3 phase 4 wire ( 3 element ) Measured energy: 4 quadrant (full quadrant) Pulsing output voltage: 5-220Vdc, Vac (current 0.1A maximum) Pulsing input voltage: 110 / 240V ac/dc, up to 16 input or output via optical external Card. Communication: ANSI type 2 optical, IEC 61107, RS-232, RS- 485(2 or 4 wire multidrop), SCADA, Modems (GSM/PSTN/CDMA/GPRS etc), MV90, MODBUS, UDP/IP, PPP/GPRS, DNP3 level 2, Master/slave communications accessed through one master gateway meter Temperature range: operating (-25 to +60C), storage (-25 to 80C) Time Of Use: 8 rates plus unified rates, 13 or more previous periods, block or rolling maximum demand Load Survey: Up to 50 channels (interval programmable from 1 second to 1 month) LCD display: 16 character by 2 line alphanumeric display Waveform capture (Harmonic analysis to the 50 harmonics) Equipment Failure Alarms (EFAs): Self checks, tamper and wiring checks (turn on an LED, LCD indicator, relay output, or trigger to send SMS)

7 PERBANDINGAN DARI MASING-MASING TYPE METER NO ITEM to COMPARE TYPE METER MK-10 MK6 MK-6N MK6E 1 Class 1s 1s 0.5s 0.2s 2 IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC (GR) IEC (kwh) IEC (kvarh) 3 Memory Up To 2.1 MByte 2.1 MByte 2.1 MByte Up To 900 kbyte 4 LCD Display Seven Segment Dot Matrik Dot Matrik Dot Matrik 5 Harmonic Analisys Not Support Support Support Support 6 Metode Pengukuran Total Total & Fundamental Total & Fundamental Total & Fundamenal 7 SCADA MODBUS RTU Not Support Support Support Support 8 Script Tambahan Not Support Support Support Support 9 Measurement Direct / CT CT/VT CT/VT CT/VT

8 EDMI METERS PIRAMIDA MK6E MK6E / MK6N MK6N/ MK6 / MK10 MK10

9 ATLAS METER LCD 7 Segment Led untuk Testing Accuracy Wh Varh Tombol Billing Reset Tombol Select Modem Port Battery Optical Port + IEC Flag Digital I/O Terminal Arus R S T Terminal Tegangan R S T N

10 GENIUS METER LCD Dot Matrix Led untuk Testing Accuracy Wh Varh Tombol Billing Reset Tombol Select Digital I/O Battery Optical Port Modem Port Terminal Arus R S T Terminal Tegangan R S T N

11 TAMPILAN LCD ATLAS SERIES MK10A 7 Segment LCD GENIUS SERIES MK6, MK6N, MK6E DOT Matrics LCD

12 METER INSTALLATION

13 Sistem Pengukuran 2 Element 3 Phasa 3 Kawat (Tegangan yang bekerja adalah tegangan antar phasa) Sistem Pengukuran 3 Element 3 Phasa 4 Kawat (Tegangan yang bekerja adalah tegangan phasa)

14 MK10 Direct MK10 CT

15 3 or 4 wire in one model

16 BASIC METERING CALCULATION

17 WHAT IS EZIVIEW???... EZIVIEW ADALAH SOFTWARE BERBASIS WINDOW YANG DIGUNAKAN UNTUK MEMBACA, MENGAMBIL DATA DAN MENGKOFIGURASI ENERGI METER MERK EDMI, EZIVIEW JUGA BISA DI GUNAKAN SEBAGAI SYSTEM AMR KARENA MEMILIKI FASILITAS SCHEDULER DIAGRAM SYSTEM AMR GSM Network KWh Meter + Modem PC SERVER Modem Modem

18