Your Connection to the World.

Transcription

1 Your Connection World. EHS support 6753i, 6755i and 6757i phones May

2 Agenda» Introduction» EHS (Electronic Hook Switch)» Standard» Kit» Ordering and pricing» List of verified/compatible headsets» Recommended settings on phone 2

3 Introduction» Mechanisms remotely control hook switch when using a wireless headset: RHL (Remote Handset Lifter): Mor based, works with almost all phones, no special requirements on phone side EHS (Electronic Hook Switch) Requires common procol supported by phone & headset. Different standard exists Blueoth Connectivity Requires native BT support in phone, headset connects phone 3

4 EHS (Electronic Hook Switch)» In addition audio path, EHS requires some additional s carry signaling tween phone and headset base station» Supported features: Phone signals incoming call headset (ep in headset) Headset butn allows send off/on hook command phone Phone signals call active / call inactive headset, headset will unmute/mute mic and turn on/off link-led» Different EHS versions exist: AEI (Avaya Tenovis) MSH (Alcatel Lucent) 4

5 Standard» : Drahtlose Hörsprechgarnitur (German for wireless headset )» Also knows as Siemens standard» Supported by many phone vendors» Often referred as The EHS-Standard» Phone vendors supporting it: : Office IP 70/80, Open Phone 71/73/75 and now also 6753i, 6755i and 6757i Polycom Snom Cisco Siemens Avaya Swyx Agfeo Elmeg Tiptel 5

6 Interface» Mechanical Interface: RJ-45 RJ45 carries voice and signaling No native EHS/RJ45 interface on 675xi Send Bus 0V Mic Signal Speaker Signal Speaker Signal Mic Signal DC in Receive Bus» work around is utilize existing Expansion module port & Headset jack support on 675xi phones» has designed a special Y that allows connectivity tween phone and Headset base» Important:» Solution only supported on 6753i, 6755i and 6757i models» Phones Require software release 2.4 or higher» + usage of an expansion module is not possible! 6

7 Connecting Cable Kit 1.- Connect Cable on back of phone! Only Only No No s s IP IP Any Any damage damage caused caused by by connecting connecting a a headset headset phone phone will will void void warranty warranty with with Telecom. Telecom. 7

8 Connecting Cable Kit 2.- Connect blue end of RJ-45 coupler (included in Kit), and connect EHS provided by headset manufacturer or side of coupler! Only Only No No s s IP IP Any Any damage damage caused caused by by connecting connecting a a headset headset phone phone will will void void warranty warranty with with Telecom. Telecom. 8

9 Ordering and Packaging» Cable Kit» Part Numr: D » Pricing: 19 (Street Price)» Content: Cable RJ-45 coupler Installation Instructions (engl) Important: This is only compatible with 6753i, 6755i and 6757i models Phones require software release 2.4 or higher + usage of an expansion module is not possible! 9

10 Relevant settings on Phone» The phone will au-detect headset» But audio mode needs set Headset/Speaker mode manually. (Options Preferences Set Audio Audio Mode Headset/Speaker)» For full headset functionality, disable "Goodbye Key Cancels Incoming Call" parameter. Web UI: Basic Settings Preferences General 10

11 Verified Wireless Headsets» GN Netcom / Jabra (requires a GN ): GN 9350 GN 9350e GN 9120 GN 9125» Plantronics (requires an APS-1 adapter box): CS60 CS70N CS351N Voyager 510S» Sennheiser (requires a TCI 01 adapter box): BW900. Use Use of of a a non-verified non-verified headset headset solution solution is is at at cusmer s cusmer s own own discretion discretion and and cusmer cusmer aware aware that that some some headsets headsets require require an an optional optional in in order order electrically electrically compliant. compliant. 11

12 GN Netcom / Jabra» Blue end of GN needs blue end of (using RJ-45 coupler)» Headset needs set mode (switch on headset base depends on model) GN Headset base Phone GN To Expansion Jack RJ45 coupler (included with Cable kit) To headset Jack GN GN

13 Plantronics» Connect RJ-45 of APS-1 (AP-1) adapter box blue end of using RJ-45 coupler Platronics Headset base APS-1 To Expansion Jack Phone APS-1 adapter box RJ45 coupler (included with Cable kit) To headset Jack RJ-45 RJ mm stereo jack 13

14 Sennheiser» Connect blue end of connecr of TCI 01 box (RJ-45 coupler not needed). Sennheiser Phone To Expansion Jack BW900 TCI 01 adapter To headset Jack TCI 01 adapter box 14

15 Thank you! 15