DIGITAL LOAD CELLS NEXT GENERATION. Robust digital load cells. Tolerate up to 1000% overload. Accuracy up to OIML C6 (MI10) Easy installation

Transcription

1 NEXT GENERATION DIGITAL LOAD CELLS Robust digital load cells Tolerate up to 1% overload Accuracy up to OIML C6 (MI1) Easy installation Stainless steel (IP68) ATEX certified zone 1, 2, 21, 22 Patented Worldwide Eilersen - Experts in Weighing Since 1969

2 NEXT GENERATION DIGITAL LOAD CELLS Experts in Weighing since 1969 Since the foundation in 1969, the Eilersen companies in Denmark and Switzerland have been dedicated to the development, manufacture and supply of high quality robust industrial sensors based on a capacitive measurement principle. This extensive know-how is patented worldwide and invested in the current range of digital load cells. The capacitive technology developed by Eilersen features a number of advantages compared to other technologies used in sensors for measuring force and weight. The Eilersen load cells feature excellent specifications, high reliability, simple installation and minimal maintenance for the use in tough and demanding industrial environments. Eilersen load cells are available with Profibus DP, DeviceNet, EtherNet/IP, EtherCAT, Modbus ASCII/RTU, RS485/422, RS232, 4-2mA and -1VDC interfaces, and can be supplied in OIML and ATEX certified versions. Selected References The Eilersen customers are found among leading companies in more than 85 countries worldwide. Certificates OMIL R6 EC Type Approval ATEX Page 1

3 Digital Load Cells and Instrumentation 2 Generation Load Cells SD SDM7 SDM8 MD FD GDS SOTD SLCAD Customized 24Vdc 2 Generation Modules Load cell module MCE21 Terminal module MCE961 Weighing Terminal (LED/LCD) MCE9625 Profibus DP module DeviceNet module Serial module Weighing Analog module EtherNet/IP module (Profibus DP) (DeviceNet) (RS232/RS485/422) Terminal (4-2mA, -1VDC) (EtherNet/IP) MCE235 MCE9637 MCE24 (LCD) MCE (for 1~8 load cells) (for 1~8 load cells) (for 1~8 load cells) 524G (for 1~8 load cells) (for 1~8 load cells) 4 Generation Load Cells SPSX BBLA DLA DMA BBMA7 BBMA8 DHA Customized 4 Generation Modules 24Vdc ATEX 24Vdc 4X29 Analog module (4-2mA,-1VDC) (for 1~4 load cells) 4X35A 4X37A 4X4A 4X5A Profibus DP module DeviceNet module Serial module EtherNet IP module (Profibus DP) (DeviceNet) (RS485) (EtherNet IP) (for 1~4 load cells) (for 1~4 load cells) (for 1~4 load cells) (for 1~4 load cells) 451A ATEX power supply Weighing Terminals Terminal (LCD) 524G Terminal (LED/LCD) MCE9625 Next generation digital load cells 2 Page 2

4 Ghost image of digital compression load cell showing ceramic sensor and pcb DIGITAL CAPACITIVE TECHNOLOGY The Choice for Industrial Applications The Eilersen digital capacitive technology is based on a non-contacting ceramic sensor mounted inside the load cell body. As the load cell contains no moving parts and the ceramic sensor is not in contact with the load cell body, the load cell tolerates very high overloads, sideloads, torsion and welding voltages. Therefore, the mechanical installation of the load cell can be done without expensive and complicated mounting kits and overload protection devices. The capacitive measurement from the ceramic sensor is directly converted to a RS485 signal which is transmitted through the single wire RG-58 coaxial cable to a weighing module. E1 E4 E2 E3 The technology and mechanical design of the Eilersen load cells is covered worldwide by a number of patents. Force Capacitive load cell Capacitive sensor Force E1 E4 E2 E3 Industrial Sensors Industrial Sensors The Eilersen digital capacitive technology is based on an accurate and stable ceramic sensor, which is non-contacting and therefore Strain gage load cell Strain gage Strain gage unaffected by overloads, sideloads, torsion and welding voltages. Force Strain gage Strain gage Page 3

5 DIGITAL CAPACITIVE TECHNOLOGY (continued...) The True Digital Weighing Solution The electrical installation of the Eilersen digital load cell is pure plug-and-play as the signal from the non-contacting sensor is directly converted, compensated and calibrated by a microprocessor in the load cell to a digital output in grams, kilograms, or Newton. Measurements and status codes are transmitted on the single wire coaxial load cell cable (RG-58) which may be up to 1 meters long. This design results in unsurpassed flexibility, high data rates and allows for connection to a wide range of equipment and interfaces (PLCs, PCs, Weighing Terminals, Displays, Profibus DP, EtherNet/IP, EtherCAT, DeviceNet, Modbus ASCII/RTU, RS232, RS485/422, 4-2mA, and -1VDC). High Accuracy and Easy Installation Eilersen load cells are factory calibrated and compensated to ensure the highest accuracy (up to OIML C6 MI1) and quality on the market. The robustness of the Eilersen load cells allows a very simple and hygienic mechanical installation. The simple installation eliminates the need for maintenance and reduces the total cost of ownership. The load cell cable can be mounted on-site if necessary and the cable length (up to 1 meters) has no influence on the calibration of the load cell. It is possible to monitor the load and status of each individual digital load cell which provides visibility, easy troubleshooting and saves time during commissioning. Hygienic tank weighing installation Simple installation of Eilersen beam load cells Next generation digital load cells Page 4

6 CHOOSE EILERSEN WEIGHING SOLUTIONS TOP 1 REASONS Part 1 No.1 Robust Load Cells for Industrial Applications The Eilersen load cells tolerate very high overloads, sideloads and torsion. The load cells are hermetically sealed (IP68) to ensure superb waterproof protection for tough industrial applications. Furthermore, the load cells are available in capacities up to 5ton. No.2 Simple Mechanical Installation Mechanical protection devices are not necessary when installing Eilersen digital load cells. This is an important cost and maintenance saver. No.3 Simple Electrical Installation The Eilersen digital load cells feature true plug-and-play installation as the load cells are pre-calibrated to transmit the load directly in gram, kilogram, ton or Newton which eliminates the need for on-site calibration in many applications. No.5 Excellent Specifications The Eilersen digital load cells can be supplied in very high accuracy (up to OIML C6 MI1) while still maintaining a very high overload tolerance. Installations in more than 85 countries worldwide No.4 ATEX Certified Solutions The Eilersen weighing solutions are ATEX certified for installation in ATEX Zone 1, 2, 21, and 22. Page 5

7 Eilersen - Experts in Weighing Since 1969 No.6 Hygienic Installations The simple mechanical installation without overload protection devices ensures hygienic installations with a minimal need for maintenance. No.7 Dynamic Applications The Eilersen digital load cells feature sampling rates of up to 1. measurements per second and a deflection of less than 1µm at Rated Capacity. These characteristics result in a high frequency of resonance which together with a wide variety of digital filters makes it possible to achieve a very fast response for dynamic applications. Hygienic weighing solutions for food and pharma industries Next generation digital load cells Page 6

8 CHOOSE EILERSEN WEIGHING SOLUTIONS TOP 1 REASONS Part 2 No.8 Intelligent Load Cells with Integrated Diagnostics For solutions using the Eilersen digital load cells, it is possible to monitor the load and status of each individual load cell with the integrated diagnostics feature. The Eilersen digital load cells will send an error code if maintenance should be required for fast and easy troubleshooting. Furthermore, a damaged load cell can be exchanged without the need for recalibration. This is an important feature in high capacity applications where it is difficult to find calibration weights. Installations in more than 85 countries worldwide Robust and reliable weighing solutions Page 7

9 No.9 Easy Integration Electronic modules are available for converting the data output from the Eilersen digital loads cells to a host of standard industrial interfaces (Profibus DP, DeviceNet, EtherNet/IP, EtherCAT, Modbus, RS485/422, RS232, 4-2mA, -1Vdc). No.1 Quality All Eilersen load cells are individually calibrated and compensated to ensure that all load cells meet the highest quality standard on the market. The digital technology is optimal for equipment with more than one load cell as several load cells can be connected to a single digital com port and thereby avoiding cabling and analog input cards. Solutions for web tension measurement Installations in food processing lines Next generation digital load cells Page 8

10 TYPICAL SYSTEM CONFIGURATION 2 Generation Ribbon cable for load cell bus SYNC SYNC SYNC MCE21 MCE21 MCE21 SYNC BNC connectors for load cells MCE21 MCE961 GND B A GND +24V GND I/O MCE9625 Start Stop Print Shift F1 F2 F3 F4 F5 RS485 RS485 RS >< AT + _ Enter Input/ Output Del POWER + Vdc 24Vdc Ribbon cable for load cell bus Ribbon cable for load cell bus TXEXT SYNC SYNC SYNC SYNC MCE24 MCE21 MCE21 MCE21 MCE21 MCE961 GND B A GND 24Vdc +24V GND I/O Vdc SW2 D2 TXCAN MS NS SYNC SYNC SYNC SYNC MCEXXXX MCE21 MCE21 MCE21 MCE21 GND B A GND 24Vdc +24V GND I/O Vdc MCE961 RS485 RS232 Modbus BNC connectors for load cells DeviceNet BNC connectors for load cells Profibus DP Vdc 24Vdc Vdc 24Vdc Ribbon cable for load cell bus - + SW SYNC SYNC SYNC SYNC D2 PBE DES RTS 2XX MCE21 MCE21 MCE21 MCE21 MCE Ribbon cable for load cell bus SW F ESC AN. SYNC SYNC SYNC SYNC MCE229 MCE21 MCE21 MCE21 MCE21 EtherNet/IP EtherCAT BNC connectors for load cells BNC connectors for load cells 4-2mA -1Vdc RS 485 Page 9

11 TYPICAL SYSTEM CONFIGURATION 4 Generation BNC connectors for load cells 444A 24V RS485 4 ATEX TxLC TxBB B A MCE9625 Start Stop Print Shift RS GND +24V EtherNet/IP EtherCAT F1 F2 F3 F4 F5 RS VDC ETHERNET SWP DES RTS PBE TxBB D2 44XA 24V 24V RS ATEX TxLC TxBB >< AT + _ Enter Input/ Output Vdc Vdc Del POWER + Vdc 24Vdc 24Vdc Vdc 24Vdc Vdc 444A 4435A 24V 1 ATEX 24VDC 24V 24V 1 ATEX RS Profibus DP PROFIBUS 2 3 RS485 4 TxLC TxBB SWP DES RTS PBE TxBB D2 4 TxLC TxBB Vdc Vdc Vdc 24Vdc DeviceNet 24VDC DeviceNet SWD MS NS TxDN TxBB 4437A 24V 24V ATEX TxLC TxBB mA -1VDC RS485 SW F ESC AN Next generation digital load cells Page 1

12 ATEX TYPICAL SYSTEM CONFIGURATION ATEX Zone Hazardous Area Safe Area MCE9625 Start Stop Print >< AT + _ Shift F1 F2 F3 F4 F5 Enter Del B A RS GND +24V AUX POWER + Vdc 24Vdc 444A 24V 1 ATEX ATEX OUT PE 24V 451A IN 24V Gnd RS485/422 RS232 Input/Output RS TxLC TxBB PE 6/12V SW2 GND B A D2 GND PBE DES +24V RTS GND I/O MCE235 MCE961 SUB-D,9pole for Profibus DP 24Vdc Vdc 24Vdc Vdc RS485 Profibus DP DeviceNet EtherNet/IP EtherCAT 44XXA 24V ATEX TxLC TxBB ATEX OUT PE 24V PE 6/12V 451A IN 24V Gnd 4-2mA -1Vdc RS485 SW F ESC AN. - + Ribbon cable for loadcell bus 444A 24V RS485 4 ATEX TxLC TxBB ATEX OUT PE 24V PE 6/12V 451A IN 24V Gnd MCE229 Safe Area ATEX Zone Hazardous Area Important guidelines for installation in ATEX (Ex) rated area: - Only ATEX certified load cells can be installed in ATEX (Ex) rated area. - Only ATEX certified modules can be used in ATEX (Ex) appplications. - Load cell modules and instrumentation must be placed outside the ATEX (Ex) rated area. - The instrumentation must be supplied by an Eilersen ATEX power supply. Page 11

13 MECHANICAL INSTALLATION EXAMPLES Installation of compression load cells under tanks or vessels with legs Installation of compression load cells under vessels with brackets Next generation digital load cells Page 12

14 Installation of compression load cells requiring lift-off protection General installation of beam load cells Page 13

15 2 Generation Products Eilersen - Experts in Weighing Since SD Digital Beam Load Cell SDM7 Digital Beam Load Cell SDM8 Digital Beam Load Cell MD Digital Compression Load Cell FD Digital Compression Load Cell GDS Digital Compression Load Cell SOTD Digital Tension Load Cell SLCAD Digital Web Tension Load Cell MCE21 Load Cell Module MCE229 Analog Output Modul MCE235 Profibus DP Output Module MCE9637 DeviceNet Output Module MCE24 Serial Communication Module 25 EtherNet/IP Output Module MCE961 Terminal Module Customized Load Cell Examples Next generation digital load cells Page 14

16 2 Generation Load Cells Digital Beam Load Cell Type SD Special Features OIML -1.kg Stainless steel Robust capacitive technology Patented high reliability capacitive sensor OIML R6 accuracy classes up to C6 (MI1) High tolerance of up to 1.% overload Hermetically sealed to IP68 Laser welded High accuracy, High resolution Digital filters Cable length up to 1meters Calibration independent of cable length Load cell cable replaceable Easy mechanical and electrical installation Withstands welding voltages and ESD Applications Dynamic weighing Process weighing Tanks and vessels Vibration sorters Filling and dosing Platform scales Packaging machines Hopper scales Belt scales Conveyor scales Big-bag equipment On-board weighing Order information SD 1.25% Type Capacity Accuracy Options Mounting kits available Load cell cable length 1, 2, 5 or 1meters Page 15

17 Digital Beam Load Cell - Type SD Dimensions (mm) Generation Load Cells Parameter Rated capacity (Emax) Safe overload limit Safe sideload limit Minimum dead load Accuracy Max. number of load cell intervals Repeatability Hysteresis Creep 3 min. Temperature effect on zero Temperature effect on sensitivity Compensated temperature range Operating temperature range Deflection at Emax Measuring rate Supply Internal resolution Material Protection Cable Maximum cable length Weight Output options Unit kg Nmax % /1 C % /1 C C C mm Hz Vdc Bit m kg.1% C1.5% C2.25% C3** , 5, 1, 2, 3, 5, 1, 15, 25, 5, 1. 2 to 1. 3 to to 5-5 to 7 (1*) Max Vdc ±1% 24 Stainless Steel 17-4 PH and AISI 316 IP68 6meter standard coaxial RG-58 (Ø6mm) with BNC connector Profibus DP, DeviceNet, Modbus ASCII/RTU,EtherCAT EtherNet/IP, RS232, RS485/422, 4-2mA, -1V dc * with Teflon cable ** higher accuracies available on request Next generation digital load cells Page 16

18 2 Generation Load Cells Digital Beam Load Cell Type SDM7 Special Features OIML -3.kg Stainless steel Robust capacitive technology Patented high reliability capacitive sensor OIML R6 accuracy classes up to C5 High tolerance of up to 1.% overload Hermetically sealed to IP68 Laser welded High accuracy, High resolution Digital filters Cable length up to 1meters Calibration independent of cable length Load cell cable replaceable Easy mechanical and electrical installation Withstands welding voltages and ESD Applications Dynamic weighing Process weighing Mobile weighing Vibration feeders Big-bag equipment Hopper scales Conveyor scales Heavy duty platform scales Heavy duty applications Offshore applications Order information SDM % Type Capacity Accuracy Options Mounting kits available Customized versions available Load cell cable length 1, 2, 5 or 1meters Page 17

19 Digital Beam Load Cell Type SDM7 Dimensions (mm) Ø Generation Load Cells Parameter Rated capacity (Emax) Safe overload limit Safe sideload limit Minimum dead load Accuracy Max. number of load cell intervals Repeatability Hysteresis Creep 3 min. Temperature effect on zero Temperature effect on sensitivity Compensated temperature range Operating temperature range Deflection at Emax Measuring rate Supply Internal resolution Material Protection Cable Maximum cable length Weight Output options Unit kg Nmax % /1 C % /1 C C C mm Hz Vdc Bit m kg.1% C1.5% C2.25% C3** , 2., 3. 3 to 1. 5 to to 5-5 to 8 (1*) Max Vdc ±1% 24 Stainless Steel 17-4 PH and AISI 316 IP meter standard coaxial RG-58 (Ø6mm) with BNC connector Profibus DP, DeviceNet, Modbus ASCII/RTU, EtherCAT EtherNet/IP, RS232, RS485/422, 4-2mA, -1V dc * with Teflon cable ** higher accuracies available on request Next generation digital load cells Page 18

20 2 Generation Load Cells Digital Beam Load Cell Type SDM8 Special Features OIML -7.kg Stainless steel Robust capacitive technology Patented high reliability capacitive sensor OIML R6 accuracy classes up to C5 High tolerance of up to 1.% overload Hermetically sealed to IP68 Laser welded High accuracy, High resolution Digital filters Cable length up to 1meters Calibration independent of cable length Load cell cable replaceable Easy mechanical and electrical installation Withstands welding voltages and ESD Applications Dynamic weighing Process weighing Mobile weighing Vibration feeders Big-bag equipment Hopper scales Conveyor scales Heavy duty platform scales Heavy duty applications Offshore applications Order information SDM % Type Capacity Accuracy Options Mounting kits available Customized versions available Load cell cable length 1, 2, 5 or 1meters Page 19

21 Digital Beam Load Cell Type SDM8 Dimensions (mm) Force For bearing GE 2AX Ø Generation Load Cells Parameter Rated capacity (Emax) Safe overload limit Safe sideload limit Minimum dead load Accuracy Max. number of load cell intervals Repeatability Hysteresis Creep 3 min. Temperature effect on zero Temperature effect on sensitivity Compensated temperature range Operating temperature range Deflection at Emax Measuring rate Supply Internal resolution Material Protection Cable Maximum cable length Weight Output options Unit kg Nmax % /1 C % /1 C C C mm Hz Vdc Bit m kg.1% C1.5% C2.25% C3** 5., 6., 7. 3 to 1. 5 to to 5-5 to 8 (1*) Max Vdc ±1% 24 Stainless Steel 17-4 PH and AISI 316 IP68 6meter standard coaxial RG-58 (Ø6mm) with BNC connector Profibus DP, DeviceNet, Modbus ASCII/RTU, EtherCAT EtherNet/IP, RS232, RS485/422, 4-2mA, -1V dc * with Teflon cable ** higher accuracies available on request Next generation digital load cells Page 2

22 2 Generation Load Cells Digital Compression Load Cell Type MD Special Features Robust capacitive technology Stainless steel High tolerance of up to 5% overload High accuracy Hermetically sealed to IP68 Laser welded Hygienic design and installation Withstands welding voltages and ESD Cable length up to 1meters Load cell cable replaceable Calibration independent of cable length -5.kg Easy mechanical and electrical installation Applications Tank weighing Process weighing Big-bag equipment Filling and dosing Offshore Level measurement Platform scales Hopper scales Heavy duty applications Belt scales Order information MD 2..25% Type Capacity Accuracy Options Base plate available Load cell cable length 1, 2, 5 or 1meters Page 21

23 Digital Compression Load Cell Type MD Dimensions (mm) Generation Load Cells Parameter Unit.1%.5%.25% Rated capacity (Emax) Safe overload limit Safe sideload limit Minimum dead load Accuracy Repeatability Hysteresis Creep 3 min. Temperature effect on zero Temperature effect on sensitivity Compensated temperature range Operating temperature range Deflection at Emax Measuring rate Supply Internal resolution Material Protection Cable Maximum cable length Weight Output options kg % /1 C % /1 C C C mm Hz Vdc Bit m kg , 1, 15, 25, 5, , 2., 3., 4., 5. 2 to 5 3 to to 5-5 to 7 (1*) Max Vdc ±1% 24 Stainless Steel 17-4 PH and AISI 316 IP meter standard coaxial RG-58 (Ø6mm) with BNC connector 1 Profibus DP, DeviceNet, Modbus ASCII/RTU, EtherCAT EtherNet/IP, RS232, RS485/422, 4-2mA, -1V dc * with Teflon cable ** higher accuracies available on request Next generation digital load cells Page 22

24 2 Generation Load Cells Digital Compression Load Cell Type FD Special Features Robust capacitive technology Stainless steel High tolerance of up to 4% overload Hermetically sealed to IP68 Laser welded Hygienic design and installation Withstands welding voltages and ESD Cable length up to 1meters Load cell cable replaceable Calibration independent of cable length Easy mechanical and electrical installation -5.kg Applications Tank weighing Process weighing Level measurement Large Vessels Offshore applications Heavy duty applications Filling and dosing Order information FD 25..1% Type Capacity Accuracy Options Base plate available Load cell cable length 1, 2, 5 or 1meters Page 23

25 Digital Compression Load Cell Type FD Dimensions (mm) Generation Load Cells Parameter Rated capacity (Emax) Safe overload limit Safe sideload limit Minimum dead load Accuracy Repeatability Hysteresis Creep 3 min. Temperature effect on zero Temperature effect on sensitivity Compensated temperature range Operating temperature range Deflection at Emax Measuring rate Supply Internal resolution Material Protection Cable Maximum cable length Weight Output options Unit kg % /1 C % /1 C C C mm Hz Vdc Bit m kg.1%.5%** , 8., , 2., 25., 5. 2 to 4 2 to 5-1 to 5-5 to 7 (1*) Max Vdc ±1% Stainless Steel 17-4 PH and AISI 316 IP68 6meter standard coaxial RG-58 (Ø6mm) with BNC connector 1 Profibus DP, DeviceNet, Modbus ASCII/RTU, EtherCAT EtherNet/IP, RS232, RS485/422, 4-2mA, -1V dc * with Teflon cable ** higher accuracies available on request Next generation digital load cells Page 24

26 2 Generation Load Cells Digital Compression Load Cell Type GDS Special Features Robust capacitive technology Patented high reliability capacitive sensor High tolerance of up to 4% overload Stainless steel Hermetically sealed to IP69K Laser welded Withstands welding voltages and ESD Cable length up to 1meters Load cell cable replaceable Pre-calibrated with signal in kg or kn Calibration independent of cable length -5ton Easy mechanical and electrical installation Applications Silo weighing Level measurement Process weighing Heavy duty applications Offshore applications Order information GDS 1.25% Price Capacity Accuracy Options Load cell cable length 1, 2, 5 or 1meters Customized versions available Page 25

27 Digital Compression Load Cell Type GDS Dimensions (mm) 3 3 *2 to 5ton version ( *) 45(65*) 12(132*) 15(2*) Generation Load Cells Parameter Rated capacity (Emax) Safe overload limit Safe sideload limit Minimum dead load Accuracy Repeatability Hysteresis Creep 3 min. Temperature effect on zero Temperature effect on sensitivity Compensated temperature range Operating temperature range Deflection at Emax Measuring rate Supply Internal resolution Material Protection Cable Maximum cable length Weight Output options * with Teflon cable ** 1ton / 2-5ton Unit ton % /1 C % /1 C C C mm Hz Vdc Bit m kg.25% 1, 2, 3, 4, 5 up to 4 up to to 5-5 to 7 (1*) Max Vdc ±1% 24 Stainless Steel 17-4 PH and AISI 316 IP68 6meter standard coaxial RG-58 (Ø6mm) with BNC connector 1 65 / 75** Profibus DP, DeviceNet, Modbus ASCII/RTU, EtherCAT EtherNet/IP, RS232, RS485/422, 4-2mA, -1V dc Next generation digital load cells Page 26

28 2 Generation Load Cells Digital Tension Load Cell Type SOTD Special Features Robust capacitive technology Patented high reliability capacitive sensor High tolerance of up to 1.% overload Stainless steel Sealed to IP67 Withstands welding voltages and ESD Cable length up to 1meters Load cell cable replaceable Pre-calibrated with signal in kg or N Calibration independent of cable length Easy mechanical and electrical installation -2.kg Applications Suspended vessels Lifts Cranes Offshore/Marine applications Tension and force measurement Heavy duty applications Order information SOTD 2..1% Type Capacity Accuracy Options Load cell cable length 1, 2, 5 or 1meters Customized versions available Page 27

29 Digital Tension Load Cell Type SOTD Dimensions (mm) R Generation Load Cells Parameter Rated capacity (Emax) Safe overload limit Safe sideload limit Minimum dead load Accuracy Repeatability Hysteresis Creep 3 min. Compensated temperature range Operating temperature range Deflection at Emax Measuring rate Supply Internal resolution Material Protection Cable Maximum cable length Weight Output options * higher capacity available on request ** with Teflon cable Unit kg C C mm Hz Vdc Bit m kg.1% 2., 5., 1., 2.* up to 1. up to to 5-5 to 7 (1**) Max Vdc ±1% 24 Stainless Steel 17-4 PH and AISI 316 IP67 6meter standard coaxial RG-58 (Ø6mm) with BNC connector 1 1 Profibus DP, DeviceNet, Modbus ASCII/RTU, EtherCAT EtherNet/IP, RS232, RS485/422, 4-2mA, -1V dc Next generation digital load cells Page 28

30 2 Generation Load Cells Digital Web Tension Load Cell Type SLCAD Special Features Robust capacitive technology Patented high reliability capacitive sensor High tolerance of up to 1.% overload Sealed to IP67 Withstands welding voltages and ESD Cable length up to 1meters Pre-calibrated with signal in kg or N Calibration independent of cable length Easy mechanical and electrical installation -5.N Applications Web tension control Tension measurement Offshore/Marine applications Force measurement Order information SLCAD 5..25% Type Capacity Accuracy Options Free application software Type SLCAD-ST with extra safety and temperature range Customized versions available Load cell cable length 1, 2, 5 or 1meters Page 29

31 Digital Web Tension Load Cell - Type SLCAD Dimensions (mm) 2 M Force M Generation Load Cells Parameter Rated capacity (Emax) Safe overload limit Safe sideload limit Minimum dead load Accuracy Repeatability Hysteresis Creep 3 min. Compensated temperature range Operating temperature range Measuring rate Supply Internal resolution Material Protection Cable Maximum cable length Weight Output options Unit N C C Hz Vdc Bit m kg.25% 2, 5, 1., 2., 5.* up to 1. up to 1..25** to 5 (1***) -5 to 7 (1***) 2 24Vdc ±1% 24 Electroplated steel IP67 6meter standard coaxial RG-58 (Ø6mm) with BNC connector 1 9 Profibus DP, DeviceNet, Modbus ASCII/RTU, EtherCAT EtherNet/IP, RS232, RS485/422, 4-2mA, -1V dc * higher capacity available on request ** higher accuracy available on request *** special version SLCAD-ST with Teflon cable Next generation digital load cells Page 3

32 2 2 Generation Generation Modules Load Modules Cells Load Cell Module - Type MCE21 Special Features The Digital Load Cell Module MCE21 interfaces the digital load cells to the Eilersen instrumentation, communication modules and other equipment with fast RS485 communication ports through the Eilersen load cell bus. The Eilersen proprietary RS485 protocol is available for OEM use. The connection between the digital load cell and the load cell module is a standard BNC connector. The load cell module is powered through the digital load cell bus ribbon cable which is terminated in the MCE961 terminal module. Up to 16 load cells modules or other modules can be connected to the Load Cell Module Eilersen digital RS485 load cell bus. Ribbon cable for load cell bus SYNC SYNC SYNC SYNC MCE21 MCE21 MCE21 MCE21MCE961 GND B A GND +24V GND I/O BNC connectors for load cells Page 31

33 Load Cell Module - Type MCE21 Dimensions (mm) SYNC MCE Connector for ribbon bus cable Generation Load Cells 2 Generation Modules 4.5 BNC connector for load cell Parameter Unit Data Application Max no. of load cells Power Temperature range Humidity Dimensions Vdc C mm 2 generation load cells and modules 16 24VDC +/- 2% -3 to +6 9%RH Next generation digital load cells Page 32

34 2 2 Generation Generation Modules Load Modules Cells Analog Output Module - Type MCE229 Special Features Analog 4-2mA or -1Vdc output Digital RS485 serial communication Six character LED display 2 digital inputs + 2 digital outputs Can be used for up to 8 digital load cells Shows the weight on each of the load cells Shows the summed weight for all the load cells Configurable measuring time (4 ms -> 4 seconds) 3 different FIR filters selectable by dip switches Plug-and-play installation with pre-calibrated digital load cells Input for zero and tare 4-2mA/-1V module Setup via keys and dip switches Application software can be made by request Vdc 24Vdc Inputs Up to 8 Eilersen digital load cells Power supply 24 Vdc, 2A Ribbon cable for load cell bus SYNC SYNC SYNC SYNC SW2 F AN. ESC digital inputs Outputs Analog 4-2mA or -1Vdc output 2 digital outputs RS485 serial output MCE21 MCE21 MCE21 MCE21 MCE229 BNC connectors for load cells 4-2mA -1Vdc RS485 Page 33

35 Analog Output Module - Type MCE229 Dimensions (mm) Connector for ribbon bus cable SW2 F AN. Ø ESC Generation Load Cells 2 Generation Modules MCE Parameter Unit Data Input Power Supply Operating Temperature Range Humidity Output Vdc C %RH 2 generation load cells and modules 24 Vdc +/- 1%, 2A -2 to +5 9%RH 4-2mA or -1Vdc Next generation digital load cells Page 34

36 2 2 Generation Generation Modules Load Modules Cells Profibus DP Output Module - Type MCE235 Special Features Profibus DP communication module for interfacing Eilersen digital load cells to a Profibus DP Master device (PLC). The module can be used for up to 8 digital load cells and transmits the weight and status for each individual load cell. The module offers plug-and-play installation with Eilersen pre-calibrated digital load cells and the module is supplied with a GSD file for easy installation. Application software can be made by request. Profibus DP Output Module Ribbon cable for load cell bus SW2 D2 PBE DES RTS SYNC SYNC SYNC MCE235 MCE21 MCE21 MCE21 Next generation digital load cells SYNC MCE21 MCE961 GND B A GND +24V GND I/O 24Vdc Vdc Profibus DP BNC connectors for load cells Page 35

37 Profibus DP Output Module - Type MCE235 Dimensions (mm) SW2 D2 PBE DES RTS MCE Connector for ribbon bus cable Generation Load Cells 2 Generation Modules Parameter Application Power Temperature range Unit 2 generation load cells and modules Humidity %RH 9%RH Communication Protocol Profibus DP Slave address Profibus DP slave address is set using DIP-switches (-127) Baudrates [kbit/s] 9.6, 19.2, 93.75, 187.5, 5, 15, 3M, 6M, 12M Address range -127(Sw2.2-Sw2.8) Connection Standard Software Versions** Vdc C Data 24Vdc +/- 2% -3 to +6 9-pin sub-d female connector to Profibus DP Ribbon cable to MCE21 load cell interface modules and MCE961 for power connection Version Description No. of Load cells Measuring time System weight calculation, Zeroing & Calibration Conctr Transmits individual weight and status of up to 8 load cells every 2 to 2.msec. A no. of FIR filters can be activated. 1 ~ 8 2~2.msec. Performed in PLC (factors stored in PLC) Weight Transmits total load and system status for up to 8 load cells every 2msec. 1 ~ 8 2msec. Performed in module* (factors stored in module) * On request from PLC **Application software can be made by request Next generation digital load cells Page 36

38 2 2 Generation Generation Modules Load Modules Cells DeviceNet Output Module - Type MCE9637 Special Features DeviceNet communication module for interfacing Eilersen digital load cells to a DeviceNet Master device (PLC). The module can be used for up to 8 digital load cells and transmits the weight and status for each individual load cell. The module offers plug-and-play installation with Eilersen pre-calibrated digital load cells and the module is supplied with an EDS file for easy installation. Application software can be made by request. DeviceNet Output Module Ribbon cable for load cell bus SW2 D2 TXCAN MS NS SYNC SYNC SYNC SYNC MCE9637 MCE21 MCE21 MCE21 MCE21 MCE961 GND B A GND +24V GND I/O 24Vdc Vdc DeviceNet BNC connectors for load cells Page 37

39 DeviceNet Output Module - Type MCE9637 Dimensions (mm) D2 SW2 TXCAN MS NS MCE Connector for ribbon bus cable Generation Load Cells 2 Generation Modules 4.5 Parameter Unit Data Application Power Temperature range Vdc C 2 generation load cells and modules 24Vdc +/- 2% -3 to +6 Humidity %RH 9%RH Communication Protocol DeviceNet Slave address DeviceNet slave address is set using DIP-switches (-63) Baudrates [kbit/s] 125, 25 or 5 Connection 5-pin open connector to DeviceNet (standard DeviceNet connect.) Ribbon cable to MCE21 load cell interface modules and MCE961 for power connection Standard Software Versions** Version Description No. of Load cells Measuring time System weight calculation, Zeroing & Calibration Conctr Transmits individual weight and status of up to 8 load cells every 2 to 2.msec. A no. of FIR filters can be activated. 1 ~ 8 2~2.msec. Performed in PLC (factors stored in PLC) Weight Transmits total load and system status for up to 8 load cells every 2 msec. 1 ~ 8 2msec. Performed in module* (factors stored in module) * On request from PLC **Application software can be made by request Next generation digital load cells Page 38

40 2 2 Generation Generation Modules Load Modules Cells RS232, RS485 Serial Output Module - Type MCE24 Special Features Serial RS232/RS485/RS422 communication module for interfacing Eilersen digital load cells to PCs, PLCs and other equipment. The module can be used for up to 8 digital load cells and transmits the weight and status for each individual load cell. The module offers plug-and-play installation with Eilersen pre-calibrated digital load cells. Application software can be made by request. RS232, RS485/422 Module Ribbon cable for load cell bus TXEXT MCE24 SYNC MCE21 SYNC MCE21 SYNC MCE21 SYNC MCE21 MCE961 GND B A GND +24V GND I/O 24Vdc Vdc RS485 RS232 BNC connectors for load cells Page 39

41 RS232, RS485/422 Serial Module - Type MCE24 Dimensions (mm) TXEXT MCE Connector for ribbon bus cable Generation Load Cells 2 Generation Modules Parameter Unit Data Application Serial channels Baud rates Connection LED-functions DIP-switch functions Temperature range Jumper functions kbit/s 2 generation load cells and modules One RS232 channel or one RS485/RS422 channel 1.2kbit/s ~ 46kbit/s 9-pin sub D connector (female) for connection of serial channels Eilersen load cell bus ribbon cable from MCE21 load cell interface modules and MCE961 module for power connection : Communication with load cells/weighing equipment : Function depends on firmware Sw1 functions depend on firmware -3 C to +6 Jumper functions depend on firmware Next generation digital load cells Page 4

42 2 2 Generation Generation Modules Load Modules Cells EtherNet/IP Output Module - Type 25 Special Features EtherNet/IP communication module for interfacing Eilersen digital load cells to PCs, PLCs and other equipment. The module can be used for up to 8 digital load cells and transmits the weight and status for each individual load cell. The module offers plug-and-play installation with Eilersen pre-calibrated digital load cells. The module is supplied with an EDS file for easy installation. Application software can be made by request. EtherNet/IP Output Module Ribbon cable for load cell bus 24Vdc Vdc SW2 D2 PBE DES RTS SYNC SYNC SYNC SYNC 25 MCE21 MCE21 MCE21 MCE21 EtherNet/IP BNC connectors for load cells Page 41

43 EtherNet/IP Output Module - Type 25 Dimensions (mm) 25. TXEXT 25 Connector for ribbon bus cable Generation Load Cells 2 Generation Modules Parameter Unit Data Application Power Temperature range Humidity Communication Protocol Vdc C %RH 2 generation load cells and modules 24Vdc +/- 2%, 2A -3 to +6 9%RH EtherNet/IP Next generation digital load cells Page 42

44 2 2 Generation Generation Modules Load Modules Cells Terminal Module - Type MCE961 Function Connection between Eilersen digital load cell bus at one side and 24Vdc Power Supply and Eilersen digital weighing terminals on the other side. Terminal Module Dimensions (mm) Connector for ribbon bus cable GND B A GND +24V GND I/O MCE961 24Vdc Vdc Parameter Unit Data Application Maximum number of load cells Power Supply Temperature Range C 2 generation load cells and modules 16 24Vdc +/- 2%, 2A -1 to +6 Page 43

45 Customized Load Cell Examples 2 Generation Load Cells Next generation digital load cells Page 44

46 Process Installation Examples Page 45

47 4 Generation Products Eilersen - Weighing Since SPSX Single Point Load Cell SPSXL Single Point Load Cell BBL Beam Load Cell BBM7 Beam Load Cell BBM8 Beam Load Cell DL Compression Load Cell DM Compression Load Cell DH Heavy Duty Compression Load Cell 4X35A Profibus DP Module 4X37A DeviceNet Module 4X4A RS485 Module 4X5A EtherNet IP Module 4X29 Analog Weighing Module 451A ATEX Certified Power Supply 414OEM RS485 OEM Module Next generation digital load cells Page 46

48 2 4 Generation Load Cells Digital Single Point Load Cell - Type SPSX Special Features OIML -15kg Stainless steel Robust capacitive technology High tolerance of up to 1.% overload High accuracy, High resolution Platform size up to 4 x 4mm Hermetically sealed to IP68 Laser welded Fast transient response Easy mechanical and electrical installation Digital filters Load cell cable replaceable ATEX version available (Zone 1, 2, 21, 22) Applications Dynamic weighing Multihead weighers Factory Automation Packaging machines Filling and dosing Flow measurement Bench and platform scales Conveyor scales Process weighing Checkweighers Options ATEX (Zone 1, 2, 21, 22) version type SP575A ATEX II 2G Ex ia IIC T6 / ATEX II 2D Ex iad 21 T85 C Customized versions available Load cell cable length 1, 2, 5 or 1meters Order information SPSX 1.15% Type Capacity Accuracy Page 47

49 Digital Single Point Load Cell Type SPSX Dimensions (mm) 5± M M6 12 M ± Generation Load Cells Parameter Rated capacity (Emax) Safe overload limit Safe sideload limit Minimum dead load Accuracy Repeatability Hysteresis Creep 3min. Temperature effect on zero Temperature effect on sensitivity Compensated temperature range Operating temperature range Deflection at Emax Measuring rate Supply Internal resolution Material Protection Cable Maximum cable length Weight Output options Unit kg % /1 C % /1 C C C mm Hz Vdc Bit m kg.25%.15% , 1, 2, 5, 1, 15 3 to 1. 5 to to 5-5 to 7 (1*) Max.1 Up to 1. 24Vdc ±1% 24 IP Stainless Steel 17-4 PH and AISI 316 6meter standard coaxial RG-58 (Ø6mm) with BNC connector 2.5 Profibus DP, DeviceNet, Modbus ASCII/RTU, EtherCAT EtherNet/IP, RS485, 4-2mA, -1V dc * with Teflon cable Next generation digital load cells Page 48

50 2 4 Generation Load Cells Digital Single Point Load Cell - Type SPSXL Special Features Stainless steel Robust capacitive technology High tolerance of up to 1.% overload High accuracy, High resolution Platform size up to 12 x 6mm Hermetically sealed to IP68 Laser welded Fast transient response Easy mechanical and electrical installation Digital filters Load cell cable replaceable -15kg Parameter Rated capacity (Emax) Safe overload limit Safe sideload limit Minimum dead load Accuracy Repeatability Hysteresis Creep 3min. Temperature effect on zero Temperature effect on sensitivity Compensated temperature range Operating temperature range Deflection at Emax Measuring rate Supply Internal resolution Material Protection Cable Maximum cable length Weight Output options Unit kg % /1 C % /1 C C C mm Hz Vdc Bit m kg.25%.15% , 5, 1, 15 3 to 1. 5 to to 5-5 to 7 (1*) Max.1 Up to 1. 24Vdc ±1% 24 IP Stainless Steel 17-4 PH and AISI 316 6meter standard coaxial RG-58 (Ø6mm) with BNC connector 2.5 Profibus DP, DeviceNet, Modbus ASCII/RTU, EtherCAT EtherNet/IP, RS485, 4-2mA, -1V dc * with Teflon cable Page 49

51 Digital Single Point Load Cell Type SPSXL Dimensions (mm) 2 4 Generation Load Cells Applications Options Dynamic weighing Multihead weighers Factory Automation Packaging machines Filling and dosing Flow measurement Bench and platform scales Conveyor scales Process weighing Checkweighers Customized versions available Load cell cable length 1, 2, 5 or 1meters Order information SPSXL 5.25% Type Capacity Accuracy Next generation digital load cells Page 5

52 2 4 Generation Load Cells Digital Beam Load Cell - Type BBL Special Features ATEX certified (Zone 1, 2, 21, 22) Stainless steel Robust capacitive technology High tolerance of up to 1.% overload Hermetically sealed to IP68 Laser welded High accuracy, High resolution Cable length up to 1meters Calibration independent of cable length Load cell cable replaceable Easy mechanical and electrical installation -1.kg Withstands welding voltages and ESD Can be used in both ATEX and non-atex installations Applications Dynamic weighing Process weighing Tanks and vessels Vibration sorters Filling and dosing Platform scales Packaging machines Hopper scales Belt scales Conveyor scales Big-bag equipment On-board weighing Options ATEX (Zone 1, 2, 21, 22) version type BBLA ATEX II 2G Ex ia IIC T6 / ATEX II 2D Ex iad 21 T85 C Mounting kits available Load cell cable length 1, 2, 5 or 1meters Order information BBL 1.25% Type Capacity Accuracy Page 51

53 Digital Beam Load Cell Type BBL Dimensions (mm) Generation Load Cells Parameter Rated capacity (Emax) Safe overload limit Safe sideload limit Minimum dead load Accuracy Repeatability Hysteresis Creep 3min. Temperature effect on zero Temperature effect on sensitivity Compensated temperature range Operating temperature range Deflection at Emax Measuring rate Supply Internal resolution Material Protection Cable Maximum cable length Weight Output options Unit kg % /1 C % /1 C C C mm Hz Vdc Bit m kg.1%.5%.25%** , 5, 1, 2, 3, 5, 1, 15, 25, 5, 1. 3 to 1. 5 to to 5-5 to 7 (1*) Max.1 Up to 1. 24Vdc ±1% 24 Stainless Steel 17-4 PH and AISI 316 IP meter standard coaxial RG-58 (Ø6mm) with BNC connector Profibus DP, DeviceNet, Modbus ASCII/RTU, EtherCAT EtherNet/IP, RS485, 4-2mA, -1V dc * with Teflon cable ** higher accuracies available on request Next generation digital load cells Page 52

54 2 4 Generation Load Cells Digital Beam Load Cell Type BBM7 Special Features ATEX certified (Zone 1, 2, 21, 22) Stainless steel Robust capacitive technology High tolerance of up to 1.% overload Hermetically sealed to IP68 Laser welded High accuracy, High resolution Digital filters Cable length up to 1meters Calibration independent of cable length Load cell cable replaceable -3.kg Easy mechanical and electrical installation Withstands welding voltages and ESD Can be used in both ATEX and non-atex installations Applications Dynamic weighing Process weighing Mobile weighing Vibration feeders Big-bag equipment Hopper scales Conveyor scales Heavy duty platform scales Heavy duty applications Offshore applications Options ATEX (Zone 1, 2, 21, 22) version type BBMA ATEX II 2G Ex ia IIC T6 / ATEX II 2D Ex iad 21 T85 C Mounting kits available Customized versions available Load cell cable length 1, 2, 5 or 1meters Order information BBM % Type Capacity Accuracy Page 53

55 Digital Beam Load Cell Type BBM7 Dimensions (mm) Ø Generation Load Cells Parameter Rated capacity (Emax) Safe overload limit Safe sideload limit Minimum dead load Accuracy Repeatability Hysteresis Creep 3min. Temperature effect on zero Temperature effect on sensitivity Compensated temperature range Operating temperature range Deflection at Emax Measuring rate Supply Internal resolution Material Protection Cable Maximum cable length Weight Output options Unit kg % /1 C % /1 C C C mm Hz Vdc Bit m kg.1%.5%.25%** , 2., 3. 3 to 1. 5 to to 5-5 to 7 (1*) Max.1 Up to 1. 24Vdc ±1% 24 Stainless Steel 17-4 PH and AISI 316 IP meter standard coaxial RG-58 (Ø6mm) with BNC connector Profibus DP, DeviceNet, Modbus ASCII/RTU, EtherCAT EtherNet/IP, RS485, 4-2mA, -1V dc * with Teflon cable ** higher accuracies available on request Next generation digital load cells Page 54

56 2 4 Generation Load Cells Digital Beam Load Cell Type BBM8 Special Features ATEX certified (Zone 1, 2, 21, 22) Stainless steel Robust capacitive technology High tolerance of up to 1.% overload Hermetically sealed to IP68 Laser welded High accuracy, High resolution Digital filters Cable length up to 1meters Calibration independent of cable length Load cell cable replaceable -7.kg Easy mechanical and electrical installation Withstands welding voltages and ESD Can be used in both ATEX and non-atex installations Applications Dynamic weighing Process weighing Mobile weighing Vibration feeders Big-bag equipment Hopper scales Conveyor scales Heavy duty platform scales Heavy duty applications Offshore applications Options ATEX (Zone 1, 2, 21, 22) version type BBMA ATEX II 2G Ex ia IIC T6 / ATEX II 2D Ex iad 21 T85 C Mounting kits available Customized versions available Load cell cable length 1, 2, 5 or 1meters Order information BBM % Type Capacity Accuracy Page 55

57 Digital Beam Load Cell Type BBM8 Dimensions (mm) Force For bearing GE 2AX Ø Generation Load Cells Parameter Rated capacity (Emax) Safe overload limit Safe sideload limit Minimum dead load Accuracy Repeatability Hysteresis Creep 3min. Temperature effect on zero Temperature effect on sensitivity Compensated temperature range Operating temperature range Deflection at Emax Measuring rate Supply Internal resolution Material Protection Cable Maximum cable length Weight Output options * with Teflon cable ** higher accuracies available on request Unit kg % /1 C % /1 C C C mm Hz Vdc Bit m kg.1%.5%.25%** , 6., 7. 3 to 5 5 to to 5-5 to 7 (1*) Max.1 Up to 1. 24Vdc ±1% 24 Stainless Steel 17-4 PH and AISI 316 IP68 6meter standard coaxial RG-58 (Ø6mm) with BNC connector Profibus DP, DeviceNet, Modbus ASCII/RTU, EtherCAT EtherNet/IP, RS485, 4-2mA, -1V dc Next generation digital load cells Page 56

58 2 4 Generation Load Cells Digital Compression Load Cell - Type DL Special Features Robust capacitive technology High tolerance of up to 1.% overload Stainless steel Hermetically sealed to IP68 Laser welded ATEX version available (Zone 1, 2, 21, 22) Low profile and hygienic design High Accuracy, High resolution Withstands welding voltages and ESD Cable length up to 1meters Load cell cable replaceable -5.kg Calibration independent of cable length Easy mechanical and electrical installation Can be used in both ATEX and non-atex installations Applications Tank weighing Process weighing Big-bag equipment Filling and dosing Offshore Level measurement Platform scales Hopper scales Heavy duty applications Belt scales Options ATEX (Zone 1, 2, 21, 22) version type DLA ATEX II 2G Ex ia IIC T6 / ATEX II 2D Ex iad 21 T85 C Base plate available Load cell cable length 1, 2, 5 or 1meters Order information DL 2..25% Type Capacity Accuracy Page 57

59 Digital Compression Load Cell Type DL Dimensions (mm) Generation Load Cells Parameter Rated capacity (Emax) Safe overload limit Safe sideload limit Minimum dead load Accuracy Repeatability Hysteresis Creep 3min. Temperature effect on zero Temperature effect on sensitivity Compensated temperature range Operating temperature range Deflection at Emax Measuring rate Supply Internal resolution Material Protection Cable Maximum cable length Weight Output options * with Teflon cable Unit kg % /1 C % /1 C C C mm Hz Vdc Bit m kg.1%.5%.25% , 1, 15, 25, 5, , 2., 3., 4., 5. 3 to 1. 5 to to 5-5 to 7 (1*) Max.1 Up to 1. 24Vdc ±1% 24 Stainless Steel 17-4 PH and AISI 316 IP meter standard coaxial RG-58 (Ø6mm) with BNC connector Profibus DP, DeviceNet, Modbus ASCII/RTU, EtherCAT EtherNet/IP, RS485, 4-2mA, -1V dc Next generation digital load cells Page 58

60 2 4 Generation Load Cells Digital Compression Load Cell Type DM Special Features ATEX certified (Zone 1, 2, 21, 22) Robust capacitive technology High tolerance of up to 4% overload Stainless steel Hermetically sealed to IP68 Laser welded Low profile and hygienic design Withstands welding voltages and ESD Cable length up to 1meters Load cell cable replaceable Pre-calibrated with signal in kg or N -5.kg Calibration independent of cable length Easy mechanical and electrical installation Can be used in both ATEX and non-atex installations Applications Tank weighing Process weighing Level measurement Large Vessels Offshore applications Heavy duty applications Filling and dosing Options ATEX (Zone 1, 2, 21, 22) version type DMA ATEX II 2G Ex ia IIC T6 / ATEX II 2D Ex iad 21 T85 C Base plate available Load cell cable length 1, 2, 5 or 1meters Order information DM 15..1% Type Capacity Accuracy Page 59

61 Digital Compression Load Cell Type DM Dimensions (mm) R Generation Load Cells Parameter Rated capacity (Emax) Safe overload limit Safe sideload limit Minimum dead load Accuracy Repeatability Hysteresis Creep 3min. Temperature effect on zero Temperature effect on sensitivity Compensated temperature range Operating temperature range Deflection at Emax Measuring rate Supply Internal resolution Material Protection Cable Maximum cable length Weight Output options * with Teflon cable Unit kg % /1 C % /1 C C C mm Hz Vdc Bit m kg.1%.5% 6., 8., 1., 15., 25., 5. 2 to to 5-5 to 7 (1*) Max.1 Up to 1. 24Vdc ±1% 24 Stainless Steel 17-4 PH and AISI 316 IP68 6meter standard coaxial RG-58 (Ø6mm) with BNC connector 1 8 Profibus DP, DeviceNet, Modbus ASCII/RTU, EtherCAT EtherNet/IP, RS485, 4-2mA, -1V dc Next generation digital load cells Page 6

62 2 4 Generation Load Cells Digital Compression Load Cell Type DH Special Features ATEX certified (Zone 1, 2, 21, 22) Robust capacitive technology High tolerance of up to 4% overload Stainless steel Hermetically sealed to IP68 Laser welded Withstands welding voltages and ESD Cable length up to 1meters Load cell cable replaceable Pre-calibrated with signal in kg or kn Calibration independent of cable length -5ton Easy mechanical and electrical installation Can be used in both ATEX and non-atex installations Applications Silo weighing Level measurement Process weighing Heavy duty applications Offshore applications Options ATEX (Zone 1, 2, 21, 22) version type DHA ATEX II 2G Ex ia IIC T6 / ATEX II 2D Ex iad 21 T85 C Load cell cable length 1, 2, 5 or 1meters Order information DH1 1.25% Type Capacity Accuracy Page 61

63 Digital Compression Load Cell Type DH Dimensions (mm) 3 3 * 2 to 5 ton version ( *) 45(65*) 12(132*) 15(2*) Generation Load Cells Parameter Rated capacity (Emax) Safe overload limit Safe sideload limit Minimum dead load Accuracy Repeatability Hysteresis Creep 3min. Temperature effect on zero Temperature effect on sensitivity Compensated temperature range Operating temperature range Deflection at Emax Measuring rate Supply Internal resolution Material Protection Cable Maximum cable length Weight Output options * with Teflon cable Unit ton % /1 C % /1 C C C mm Hz Vdc Bit m kg.25% 1, 2, 3, 4, to 5-5 to 7 (1*) Max.1 Up to 1. 24Vdc ±1% 24 Stainless Steel 17-4 PH and AISI 316 IP68 6meter standard coaxial RG-58 (Ø6mm) with BNC connector 1 65 / 75 Profibus DP, DeviceNet, Modbus ASCII/RTU, EtherCAT EtherNet/IP, RS485, 4-2mA, -1V dc Next generation digital load cells Page 62

64 2 4 Generation Generation Modules Load Modules Cells Profibus DP Profibus DP Module - Type 4X35A Special Features Profibus DP output Weighing module for up to 4 digital load cells For ATEX and non-atex applications Plug-and-play installation with Eilersen digital load cells Advanced digital filters (configurable) A Digital Junction Box that can be mounted near the load cells or in a central panel Small Form Factor Setup via dip switches For ATEX when supplied by power supply type 451A The power supply 451A and module type 4X35A must be installed outside the hazardous zone Profibus DP Module Application software can be made by request 24Vdc Vdc Intputs Up to 4 coaxial connectors for digital load cells 4435A Power supply 24Vdc, 1A for Profibus DP 24VDC PROFIBUS SWP DES RTS PBE TxBB D2 24V 24V ATEX TxLC TxBB Non-ATEX applications: 24Vdc, 1A ATEX applications: Safe power supply 24Vdc,.2A from ATEX power supply type 451A Module output Profibus DP Order information No of load cells Type A A A A Page 63

65 Profibus DP Module - Type 4X35A Dimensions (mm) Ø VDC PROFIBUS 8 SWP 1 DES RTS PBE TxBB D2 4435A 24V 24V 1 on on ATEX TxLC TxBB Generation Load Cells 4 2 Generation Modules Parameter Unit Data Application 4 generation load cells and modules Profibus DP Power Supply ATEX: Safe Power Supply Vdc 24Vdc +/- 1%, 1A ATEX certified power supply type 451A Non-ATEX: Standard Power Supply Operating Temperature Range Vdc C 24Vdc +/- 1%, 1A -2 to +5 Weight Housing g 5 Anodized Aluminum Mounting Mounting base or DIN rail Standard Software Versions** Version Description No. of Load cells Measuring time System weight calculation, Zeroing & Calibration Conctr Transmits individual weight and status of up to 8 load cells every 2 to 2.msec. A no. of FIR filters can be activated. 1 ~ 8 2~2.msec. Performed in PLC (factors stored in PLC) Weight Transmits total load and system status for up to 8 load cells every 2msec. 1 ~ 8 2msec. Performed in module* (factors stored in module) * On request from PLC **Application software can be made by request Next generation digital load cells Page 64

66 2 4 Generation Generation Modules Load Modules Cells DeviceNet DeviceNet Module - Type 4X37A Special Features DeviceNet output Weighing module for up to 4 digital load cells For ATEX and non-atex applications Plug-and-play installation with Eilersen digital load cells Advanced digital filters (configurable) A Digital Junction Box that can be mounted near the load cells or in a central panel Small Form Factor Setup via dip switches For ATEX when supplied by power supply type 451A The power supply 451A and module type 4X37A must be installed outside the hazardous zone DeviceNet Module Application software can be made by request 24Vdc Vdc Intputs Up to 4 coaxial connectors for digital load cells 4437A Power supply 24Vdc, 1A for DeviceNet 24VDC DeviceNet 24V 24V 1 2 ATEX Non-ATEX applications: 24Vdc, 1A ATEX applications: Safe power supply 24Vdc,.2A from ATEX power supply type 451A SWD MS NS TxDN TxBB 3 4 TxLC TxBB Module output DeviceNet Order information No of load cells Type A A A A Page 65

67 DeviceNet Module - Type 4X37A Dimensions (mm) Ø VDC DeviceNet SWD MS NS TxDN TxBB 4437A 24V 24V ATEX TxLC TxBB Generation Load Cells 4 2 Generation Modules Parameter Unit Data Application 4 generation load cells and modules DeviceNet Power Supply ATEX: Safe Power Supply Vdc 24Vdc +/- 1%, 1A ATEX certified power supply type 451A Non-ATEX: Standard Power Supply Operating Temperature Range Vdc C 24Vdc +/- 1%, 1A -2 to +5 Weight Housing g 5 Anodized Aluminum Mounting Mounting base or DIN rail Standard Software Versions** Version Description No. of Load cells Measuring time System weight calculation, Zeroing & Calibration Conctr Transmits individual weight and status of up to 8 load cells every 2 to 2.msec. A no. of FIR filters can be activated. 1 ~ 8 2~2.msec. Performed in PLC (factors stored in PLC) Weight Transmits total load and system status for up to 8 load cells every 2 msec. 1 ~ 8 2msec. Performed in module* (factors stored in module) * On request from PLC **Application software can be made by request Next generation digital load cells Page 66

68 2 4 Generation Generation Modules Load Modules Cells RS485 RS485 Module - Type 4X4A Special Features RS485 output Weighing module for up to 4 digital load cells For ATEX and non-atex applications Plug-and-play installation with Eilersen digital load cells Advanced digital filters (configurable) A Digital Junction Box that can be mounted near the load cells or in a central panel Small Form Factor Setup via dip switches For ATEX when supplied by power supply type 451A The power supply 451A and module type 4X4A must be installed outside the hazardous zone RS485 Module Application software can be made by request 24Vdc Vdc Inputs 444A 24V 1 2 ATEX Up to 4 coaxial connectors for digital load cells Non-ATEX applications: 24Vdc, 2A ATEX applications: Safe power supply 24Vdc,.2A from ATEX power supply type 451A 3 RS485 4 TxLC TxBB Module output RS485 sub-d connector Order information No of load cells Type 1 414A 2 424A 3 434A 4 444A Page 67

69 RS485 Module - Type 4X4A Dimensions (mm) Ø A 24V RS485 4 ATEX TxLC TxBB Generation Load Cells 4 2 Generation Modules Parameter Unit Data Application 4 generation load cells and modules ATEX: Safe Power Supply ATEX certified power supply type 451A Non-ATEX: Standard Power Supply Vdc 24Vdc +/- 1%, 2A Operating Temperature Range C -2 to +5 Weight g 45 Housing Anodized Aluminum Mounting Mounting base or DIN rail Next generation digital load cells Page 68

70 2 4 Generation Generation Modules Load Modules Cells EtherNet/IP EtherNet/IP Module - Type 4X5A Special Features EtherNet/IP output Weighing module for up to 4 digital load cells For ATEX and non-atex applications Plug-and-play installation with Eilersen digital load cells Advanced digital filters (configurable) A Digital Junction Box that can be mounted near the load cells or in a central panel Small Form Factor Setup via dip switches For ATEX when supplied by power supply type 451A The power supply 451A and module type 4X5A must be installed outside the hazardous zone EtherNet/IP Module Application software can be made by request 24Vdc Vdc Intputs Up to 4 coaxial connectors for digital load cells 445A Power supply 24Vdc, 1A for EtherNet/IP 24VDC EtherNet 24V 24V 1 2 ATEX Non-ATEX applications: 24Vdc, 1A ATEX applications: Safe power supply 24Vdc,.2A from ATEX power supply type 451A SWE MS NS TxDN TxBB 3 4 TxLC TxBB Module output EtherNet/IP Order information No of load cells Type 1 415A 2 425A 3 435A 4 445A Page 69

71 EtherNet/IP Module - Type 4X5A Dimensions (mm) Ø VDC EtherNet SWE MS NS TxDN TxBB 445A 24V 24V ATEX TxLC TxBB Generation Load Cells 4 2 Generation Modules Parameter Unit Data Application 4 generation load cells and modules EtherNet/IP Power Supply ATEX: Safe Power Supply Vdc 24Vdc +/- 1%, 1A ATEX certified power supply type 451A Non-ATEX: Standard Power Supply Operating Temperature Range Vdc C 24Vdc +/- 1%, 1A -2 to +5 Weight Housing g 5 Anodized Aluminum Mounting Mounting base or DIN rail Next generation digital load cells Page 7

72 2 4 Generation Generation Modules Load Modules Cells 4-2-mA -1Vdc RS485 Analog Weighing Module - Type 4X29 Special Features Analog 4-2mA or -1Vdc output Digital RS485 serial communication Six character LED display 2 digital inputs + 2 digital outputs Weighing module for up to 4 digital load cells Shows the weight on each of the connected load cells Shows the summed weight for the connected load cells Configurable measuring time (4ms -> 4sec) 3 different FIR filters selectable by dip switches Plug-and-play installation with Eilersen digital load cells Input for zero and tare A "Digital Junction Box" that can be mounted near the 4-2mA/-1Vdc Module load cells or in a central panel Application specific software can be made by request SW F AN ESC - + Vdc 24Vdc Inputs Up to 4 coaxial connectors for Eilersen digital load cells Power supply 24Vdc, 1A 2 digital inputs Outputs Analog 4-2mA or -1Vdc output 2 digital outputs RS485 serial output Order information No of load cells Type Page 71

73 Analog Weighing Module - Type 4X29 Dimensions (mm) SW F AN Ø4.3 ESC Generation Load Cells 4 2 Generation Modules Parameter Unit Data Application Power Supply Operating Temperature Range Weight Housing Mounting Vdc C g 4 generation load cells and modules 24Vdc +/- 1%, 1A -2 to Anodized Aluminum Mounting base or DIN rail Next generation digital load cells Page 72

74 2 4 Generation Generation Modules Load Modules Cells ATEX Certified Power Supply - Type 451A Special Features ATEX certified power supply for Eilersen digital weighing modules type 4XXXA For hazardous applications in ATEX Zone 1, 2, 21 or 22 The power supply type 451A and module type 4XXA must be installed outside the hazardous zone Small Form Factor Inputs Standard power supply 24 Vdc, 1A Outputs ATEX Power Supply Safe 24 Vdc,.2A output Dimensions (mm) Ø4.5 ATEX OUT PE 24V 451A IN 24V Gnd PE 6/12V Page 73

75 RS485 Module - Type 414OEM RS485OEM Module 2 Generation Load Cells 4 2 Generation Modules Special Features Inputs RS485 output Weighing module with connector for 1 digital load cell Coaxial connector for 1 digital load cell Power supply 24Vdc, 1A Plug-and-play installation with pre-calibrated digital load cell Advanced digital filters (configurable) Setup via dip switches Application software can be made by request Outputs RS485 (Customized protocols available) Parameter Unit Data Application Power Supply Operating Temperature Range Weight Mounting Vdc g C 4 generation load cells and modules 24Vdc +/- 1%, 1A 24Vdc ±1%, 1A 9%RH -2 to +5 Next generation digital load cells Page 74

76 Weighing terminal type 524G mounted in stainless steel box Page 75

77 Eilersen - Weighing Since Weighing Terminals 524G Digital LCD MCE9625L Digital LED MCE9625G Digital LCD Next generation digital load cells Page 76

78 2 Weighing Generation Terminals Modules Load Cells Digital LCD Weighing Terminal - Type 524G Special Features 5,2" LCD for displaying data and parameters Touch keyboard with 7 keys for zeroing, tare function, entering parameters, set-points, etc. Alibi memory Ethernet, RS485, and 4-2mA output for communication with PCs, PLCs, central data processing systems, printers, bar code readers, etc. 4 configurable 24Vdc I/O Function keys for Start/Stop and Print for handling various processes Durable front with no keyboard to be worn out OIML 524G Weighing terminal type 524G for panel mounting Introduction Fully digital OIML certified Weighing terminal type 524G with alibi memory and software for standard weighing applications The Eilersen weighing terminals feature a digital signal processor for displaying and processing the data from the Eilersen range of digital load cells and force transducers Applications Application software is available for all standard applications: Scales Force measurement Filling & Dosing Vessel weighing Checkweighing Level-by-weight Customer specific application software Special application software can also be developed to customer specifications Page 77

79 Digital LCD Weighing Terminal - Type 524G Dimensions (mm) 2 Generation Load Cells 2 Weighing Generation Terminals Modules Parameter Housing Mounting Keyboard technology Memory Digital input / output Interfaces Power supply Temperature range Humidity IP protection Data Stainless steel Desktop, wall or panel Capacitive Touch 4Mb 4 configurable, 24Vdc +- 2%,,1A 1 x RS485, 1 x EtherNet, 1 x 4-2mA 24Vdc +- 1%, 2A -2 to +5 degrees Celsius 9% RH, non condensing - Standard is panel mounting IP44 - Stand alone with AISI316 IP66 housing Next generation digital load cells Page 78

80 2 Weighing Generation Terminals Modules Load Cells Digital LED Weighing Terminal - Type MCE9625L Special Features 2 x RS485, 1 x RS485/422, 2 x RS232 serial interfaces 3 x 24Vdc inputs and 3 x 24Vdc outputs 7-segment LEDs for displaying data and parameters 7 x LEDs for signalling: Zero valid, In on/off, Out on/off Numeric keyboard with keys for zeroing, tare function, gross/net and entering parameters, set-points etc. Function keys for Start/Stop and Print for handling various processes Ten function keys for entering and controlling parameters Connection to Fieldbus and supervisory (ERP) systems Optional extra LEDs for signalling in OEM applications OIML MCE9625L Weighing terminal type MCE9625L shown in stainless steel housing Optional I/O extension: 4 x 24Vdc digital inputs and 8 x 24Vdc,.1A digital outputs for connection to photo cells, relays, actuators etc. Introduction Fully digital OIML certified Weighing terminal type MCE9625L with software for all standard weighing applications The Eilersen weighing terminals feature a digital signal processor for displaying and processing the data from the Eilersen range of digital load cells and force transducers The MCE9625L is a weighing terminal with internal recipe handling to allow automation of batching and manual additions. The weighing terminal features various batch functions for direct control of batch components Applications Application software is available for all standard applications: Scales Force measurement Filling & Dispensing Flow Dosing Vessel weighing Mixing Level-by-weight Batching with recipe handling Checkweighing Loss-in-Weight Belt Scales Customer specific application software Your investment is protected as the weighing terminal can be extended with extensive functions and optional external communication via RS485, Profibus DP, DeviceNet, EtherNet, 4-2mA etc. Special application software can also be designed to customer specifications Page 79

81 Digital LED Weighing Terminal - Type MCE9625L Dimensions (mm) MCE9625L Start Stop Print Shift F1 F2 F3 F4 F5 256 Note! Panel mounting opening: 245 9mm >< AT + _ Enter Del Generation Load Cells 2 Weighing Generation Terminals Modules Parameter Digital input / output Communication Jumper Memory Power supply Temperature range Humidity IP protection Data Three inputs 24Vdc +- 2% and three outputs 24Vdc/AC +- 2%,.1A 2 x RS485, 1 x RS485/422, 2 x RS232 1 accessible jumper for hardware lock of certified parameters SEEPROM for non-volatile storage of parameters 24Vdc +- 2 %,.5A -3 to +6 degrees Celsius 9% RH, non condensing - Standard is panel mounting IP44 - Stand alone with AISI316 IP54 housing - Stand alone with AISI316 IP66 housing Next generation digital load cells Page 8

82 2 Weighing Generation Terminals Modules Load Cells Digital LCD Weighing Terminal - Type MCE9625G Special Features 2 x RS485, 1 x RS485/422, 2 x RS232 serial interfaces 3 x 24Vdc inputs and 3 x 24Vdc outputs 256 x 64pixel (4 x 8 characters) graphic LCD display with LED backlight for displaying data and parameters plus specific functions for the ten function keys, help screens etc. Alphanumeric keyboard with keys for zeroing, tare function, gross/net and entering parameters, set-points, etc. Function keys for Start/Stop and Print for handling various processes Ten function keys for entering and controlling parameters Connection to Fieldbus and supervisory (ERP) systems OIML MCE9625G Weighing terminal type MCE9625G for panel mounting Optional I/O extension: 4 x 24Vdc digital inputs and 8 x 24Vdc,.1A digital outputs for connection to photo cells, relays, actuators etc. Introduction Fully digital OIML certified Weighing terminal type MCE9625G with software for all standard weighing applications The Eilersen weighing terminals feature a digital signal processor for displaying and processing the data from the Eilersen range of digital load cells and force transducers The MCE9625G is a weighing terminal with internal recipe handling to allow automation of batching and manual additions. The weighing terminal features various batch functions for direct control of batch components Applications Application software is available for all standard applications: Scales Force measurement Filling & Dispensing Flow Dosing Vessel weighing Mixing Level-by-weight Batching with recipe handling Checkweighing Loss-in-Weight Belt Scales Customer specific application software Your investment is protected as the weighing terminal can be extended with extensive functions and optional external communication via RS485, Profibus DP, DeviceNet, EtherNet, 4-2mA etc. Special application software can also be designed to customer specifications Page 81

83 Digital LCD Weighing Terminal - Type MCE9625G Dimensions (mm) MCE9625G Start Stop Print Shift F1 F2 F3 F4 F5 256 Note! Panel mounting opening: 245 9mm >< AT + _ Enter Del Generation Load Cells 2 Weighing Generation Terminals Modules Parameter Digital input / output Communication Jumper Memory Power supply Temperature range Humidity IP protection Data Three inputs 24Vdc +- 2% and three outputs 24Vdc/AC +- 2%,.1A 2 x RS485, 1 x RS485/422, 2 x RS232 1 accessible jumper for hardware lock of certified parameters SEEPROM for non-volatile storage of parameters 24Vdc +- 2 %,.5A -3 to +6 degrees Celsius 9% RH, non condensing - Standard is panel mounting IP44 - Stand alone with AISI316 IP54 housing - Stand alone with AISI316 IP66 housing Next generation digital load cells Page 82

84 ls Hygienic Robust Scales ls Hygienic Robust Scales Eilersen has developed a range of scales to meet the increasing demands from the food and pharmaceutical industries Scales integrated in the production process have to meet the requirements to hygiene while being so robust that a forklift can drive into or over the scale without damaging the load cells. Furthermore the scale must to be very safe and easy to clean. The new range of hygienic and robust scales from Eilersen fulfils these requirements. Special Features Very robust and hygienic design Can handle up to 3% overload Equipped with Eilersen robust digital load cells Available in many different configurations Available with local indicator and/or interface to PLC or PC Weighing capacity up to 5.kg Robust scale without bacterial traps Safe and easy to clean Page 83

85 2 Hygienic Robust Scales lls les Very safe to handle Easy to clean Specifications Capacity: Up to 5.kg Dimensions: can be made according to customer requirements Material: AISI34 or 316 Local Indicator and/or interface to PC/PLC - Profibus DP - DeviceNet - EtherNet/IP - Modbus ASCII/RTU - 4-2mA - -1Vdc - EtherCAT (pending) - ProfiNet (pending) Power supply: 23VAC or 24VDC +/- 1%, min. 2A Next generation digital load cells Page 84

86 ls Hygienic Robust Scales ls Robustbenchscales Customizedstainlesssteelscales Options Customizedversionscan bemadebyrequest Canbesuppliedinver- sionsthatcanbecertified forsale Canbesuppliedinver- sionsforinstallationin ATEXZone1,2,21or22 Page 853