Tixi Data Gateway LAN

Transcription

1 Data Sheet Tixi Data Gateway LAN HE400, HE Remote Maintenance and Control Fault Messaging Data Logging Web Server PLC Protocols Energy Monitoring with : Up to 100 energy meters can be monitored by a single Tixi Data Gateway LAN Tixi Data Gateway with 4 I/O Modules Tixi Data Gateways for cellular GSM, WLAN or telephone networks: HG400/600, HW400/600 and H. Tixi Main Unit Tixi I/O-Modules Series HE400 HE600 Type XP84D XP84DR XP88D XR46 XYZ CPU ARM7 ARM9 Digital inputs Speed 60 MHz 200 MHz Digital outputs RAM 8 MB 64 MB Relays Flash Memory 8 MB 64 MB RS SD-Card (max.) 2 GB 2 GB RS Operating System MQX-RTOS Linux 2.6 Max. number of I/O-Modules Max. number of I/O-Modules custom modules Models HE400 HE421 HE427 HE430/ 32/34 HE441 HE447 HE471 HE476 HE423- HE443- HE445- HE425-2S0 COM1 RS232 RS232 RS232 RS232 RS232 RS232 RS232 RS232 RS232 RS232 RS232 COM2/ COM3 RS232 RS232 RS232 RS485/ 422 RS485/ 422 Siemens S7-MPI Siemens S7-MPI RS232 RS485 2xRS485 RS232 Digital Input /8/ Analog Input Digital Output - 2 0/2/ Relay Metering Interface HE600 HE621 HE627 HE630/ 32/34 HE641 HE647 HE671 HE676 HE623- HE643- HE645-2x S0 pulse input HE625-2S0 PLC Options Optional PLC protocols (Feature Packs) enable direct communication between Tixi Data Gateway and PLCs - without the need for special drivers inside the PLC: Mitsubishi Moeller Siemens VIPA ABB Saia Burgess Allen Bradley Theben PLC Protocols Alpha XL FX1S FX1N FX2N FX2NC FX3U Drives EASY400 EASY500 EASY600 EASY700 EASY800 MFD-Titan PS4-Serie EasyControl XC/XVC S7-200 S7-300 S V 200V 300V SPEED7 AC010 AC31 AC500 AC800 CL PCD1 PCD2 PCD3 PCS Serie A Serie B GFX Pharao2 MODBUS (RTU, ASCII) TixiBus OEM Protocols for WAGO, Rockwell Automation, Allen Bradley, Schneider Electric, B&R etc. simple protocol for small PLCs (master-slave principle) Upon customer orders for pumps, heating systems (ebus), air conditioning, data loggers, temperature sensors, radio systems etc.

2 Tixi Data Gateway LAN HE400/HE600 Data Sheet Page 2 / 5 Alarm and Fault Notifications Fault Notification Alarm Cascade Address Book Message Templates Features Automatic generation and dispatch of more than 100 fault notifications Condition based monitoring of data may launch events Message templates may include current values from PLC or Tixi Data Gateway Up to 100 predefined events may trigger actions. Message confirmation may be implemented by means of freely definable alarm levels. Address book with more than 100 contacts More than 100 message templates may contain variable values from PLCs or the Tixi Data Gateway. Destination addresses and PLC variables are defined as references. Message length is not restricted (only by memory size). Neutral Data Data Converter All data of local systems connected to the device (PLCs, meters, sensors etc) are managed by means of a neutral variable table (XML). These XML-data are independent of their origin. All Tixi functions use these neutral data. Local PLC data may thus be translated from one system to another, e.g. meter data may be handed to a PLC or BMS (building management system). Data Logger Data Logging Data Dispatch All values (e.g. PLC or meter values) may be logged on a regular basis. (e.g. every 1 min, 15 min, 1h, 1d, ) or upon certain events. Data is automatically compressed (binary format). Saved Log data may be sent as attachments at scheduled times or as a result of any event. Their format is to be freely defined, such as XML or Microsoft Excel CSV. Embedded Webserver Webserver The user may create custom websites with any HTML editor, including XML placeholders for system values. By means of these websites, current data may be displayed or custom input masks can be defined. Common Gateway Interface (CGI) for dynamic read and write of values and for log data readout. Special SSI (Server side Includes) allow embedding of values and log data into websites. Remote Control Switching Commands Confirmation Switching commands may be transmitted via , HTTP or TiXML command onto the Tixi Data Gateway. HTTP and TiXML commands may be defined freely and may contain e.g. setpoint values. If need be, the device may send confirmation commands upon receipt and execution of a remote switching command, in order to report the positive (or negative) result of such. Programmable Features Scheduler Logical Operations Sequencer Arithmetic Operations Event Calendar may trigger the following actions: - Creation of logfile entries or dispatch of logfiles, - Switching I/Os or setting PLC variables, - Dispatch of periodic status messages - Automatic shift schedules may change the receiver of messages. Functions (e.g. AND, OR, XOR, NOT) and Comparisons (z.b. GT, LT, EQ) can be applied to variable values, even along with time schedules, may trigger actions. Time-dependent data arrays can be preset over a specific span of time, either via configuration or by message. E.g monitoring of current values and dispatch of messages in case that current values exceed min./max. curves (depending on a time grid of 15-min-steps up to one year). Several curve sets may be used in conjunction or as separate data sets. Simple arithmetics (ADD, SUB, MUL, DIV) allows calculation with PLC and variable values. Configuration TiXML Configuration Security TiXML is the XML based command language used to configure Tixi devices. Via TiXML, programs and devices may easily communicate with Tixi devices. TiXML via TCP/IP or COM1 RS232 or via batch file on an SD card. Access to the Tixi device and to the configuration is protected by several levels of login and password - both remotely and locally.

3 Tixi Data Gateway LAN HE400/HE600 Data Sheet Page 3 / 5 System and General Features Event Reset / Factory Reset IP / DHCP TFTP Local Transparent Mode Special Features e.g.: change of PLC variable(s), exceeding a threshold, scheduled point in time reached, error, PLC connection interrupted etc. dispatch (SMTP, ESMTP), e.g. with log file attachment, retrieve of POP3 for remote control Restart the device and retain the current configuration or do a Factory Reset which deletes all settings and returns the device to factory settings IP settings via configuration or automatically via DHCP (Dynamic Host Control Protocol) Upload of websites via TFTP (Trivial File Transfer Protocol) Transparent loop-in of serial COM1 interface to PLC-Interface COM2. Upon customer request, features and protocols may be implemented into the Tixi Data Gateway. Hardware CPU System CPU RAM FLASH Memory System Clock Memory Card Active LED Unmount Button Batch Mode Updates Memory Cards Controls Service Button Signal LED Speaker System LEDs Serial Interfaces COM1 RS232 COM2 RS232 COM2 RS485 Firmware TECom Operating System File System OEM Features HE400: 32 bit ARM7 Processor, 60 MHz HE600: 32 bit ARM9-Processor, 200 MHz HE400: 8 MB SDRAM HE600: 64 MB SDRAM HE400: 8 MB (Options: 4 MB, 24 MB, 40 MB HE600: 64 MB (Options: 32 MB, 128 MB) Real Time Clock (RTC), battery buffered Synchronisation with internet time server optional green: red: SD card mounted Read/write access in progress Before removing the SD card, press the "Unmount Button" first and wait until the "Active" LED is off Upload TiXML configuration, download logged data from internal memory to the SD card Firmware and boot loader update via RS232 or SD card SD cards up to 2 GB internal Micro-SD card adapter (optional, access requires opening the device case) To be configured by the user: Allows triggering of any kind of event or action. red/green: User-definable, controllable via TiXML (red-green flashing, 32 variants), e.g. red = faulty green = operational Micro-speaker for signal tones Power, Process, Connect, Data out, Mode D-Sub 9 female, max bps, ITU-T V.24, V.28, Hardware Handshake, FIFO 16550, All signals: DTR, DSR, RTS, CTS, DCD, GND, RI, RxD, TxD, Transmission distance: 12 m D-Sub 9 male, otherwise the same as COM1 According to EIA/TIA-485, 3- or 5-pin screw terminals max 230 kbit/s, not galvanically insulated integrated termination, can be activated by means of DIP switches Transmission distance: 1200 m depending on transmission rate and type of bus and cable Tixi Embedded Communication System TECom offers all basic features for local communication to PLCs and remote communication via cellular and analogue phone networks, LAN/WLAN and IP-based networks. TECom is a platform independent and portable protocol. HE400: commercial RTOS (Real-Time Multitasking Operating System MQX) HE600: Linux 2.6 DOS-compliant Flash file system (with wear leveling) All data is retained during power failure. Firmware is open to custom upgrades, such as: New PLC protocols, calculating and processing functions, additional web server features

4 Tixi Data Gateway LAN HE400/HE600 Data Sheet Page 4 / 5 Conformity DIN EN , DIN EN Data Rate Data Format Electrical Isolation: HE400-M25: Master for up to 25 meters HE400-M60: Master for up to 60 meters HE400-M100: Master for up to 100 meters short-circuit-proof Voltage: 36 V, Bus length: approx. 1 km with M25, telephone wires ø 2 0,8mm, unshielded, 3 screw terminals (grid dimension: 5,08 mm / 0,1"), section max. 2,5 mm² 300 Baud to 115 kbaud 8 data bits, 1 start bit, 1 stop bit and 1 parity bit (even) 1500 Volt Pulse Inputs for Energy Meters (S0 Input) Conformity DIN Inputs and Outputs (I/Os) 2 connectors, active and passive devices may be connected Current: usually 24 V, range V, 30 ma, Amperage: inactively: ma, actively: ma Debouncing time: 13 ms, line length: max. 3 m, unshielded 6 screw terminals, grid dimensions 5,08 mm, diameter max. 2,5 mm² Up to 13 inputs (HE430) and 4 inputs and 4 outputs (HE434) are available in the main unit. Up to 8 I/O modules with up to 128 I/Os can be connected and controlled via one Tixi device, using the Tixi I/O bus. I/Os of the Tixi device Inputs Outputs Connectors Digital Analog Digital Relays via potential-free contacts V DC, resolution: 12 bit potential-free, AC/DC 125 V, 120 ma potential-free, 230 V AC 3 A or 110 V DC 0,3 A Screw terminal (grid dimension: 5,08 mm / 0,1"), section max. 2,5 mm² I/Os of the Tixi I/O modules XP84D 8 digital inputs, 4 digital outputs Inputs XP88D 8 digital inputs, 8 digital outputs XP84DR 8 digital inputs, 4 relay outputs OEM-I/Os Upon custom order: digital and analogue inputs and outputs, RS232, RS485, relay,... Power Supply Standard Model Model Connectors Case Mounting Type OEM Case Width / Height / Depth Weight V DC, max. 0,7 A (with up to 8 I/O modules) 24 V DC and without I/O modules: max. I = 250 ma V DC, max 0,7 A 2 screw terminals (grid dimension: 5,08 mm / 0,1"), section max. 2,5 mm² at DIN Rail 35 mm (EN50022), vertically or horizontally Tixi-H5 Case: DIN-Rail Case Standard OEM DIN-Rail Case: Tixi-H5 88 mm 57 mm 91mm 225 g Compliance Conformity Temperature Range Permitted Humidity Protection Degree of fouling 2 Mechanical Fastness OEM Models Safety: EN60950 EMV: EN55022 (9:2003), EN55024 (10:2003) Operation: C, Storage: C % relative humidity, non-condensing IP20 Vibration (Sinus) according to IEC , Vibration (Broadband) according to IEC Shock according to IEC OEM Models may be manufactured in different case colors and shapes, as well as in hardware interfaces or design and software.

5 Tixi Data Gateway LAN HE400/HE600 Data Sheet Page 5 / 5 Ethernet Operating Mode Status LEDs Electrical Isolation 10/100 Base-T IEEE 802.3, RJ45 jack (8P8C), shielded Auto-Negotiation, Auto-MDI-X (crossover cable not required) green flashing yellow off yellow on 1500 V Data transmission in progress 10 Base-T 100 Base-T Wireless LAN: Alle HE400 and HE600 models are available with Wireless LAN interface as HW400 and HW600. Illustration HE627 or HE427 XP88D