User Manual 1. Linx-37 User Manual

Transcription

1 User Manual 1 Linx-37 User Manual

2 Contents Safety Information 3 Specification 6 Connection 7 Accessories 8 Header Assembly 9 Physical Connection 10 Control System 11 Service and Maintance 15 Package 16 User Manual 2

3 01 Safety Information: WARNING! Read the safety precautions in this section before installing, powering, operating or servicing this product. The following sysmbols are used to identify important safety information on the product and in this manual: WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! Safety hazard. Risk of severe injury or death. Refer to manual before installing, powering or servicing. Hazardous voltage. Risk of lethal or severe electric shock. Hot surface. Do not touch. Fire hazard. Emission hazardous to eyesight. This product is for professional use only. It is not for household use. This product presents risks of severe injury or death due to fire hazards, electric shock and falls. Read this manual before installing, powering or servicing this product, follow the safety precautions listed below and observe all warnings in this manual and printed on the product. If you have questions about how to operate the tile safely, please contact your ROE supplier. PROTECTION FROM ELECTRIC SHOCK. Connect the product to AC mains power within the range V nominal at 50 or 60 Hz only. Disconnect the product from power when not in use. Always ground (earth) the product electrically. Before using the product, check that all power distribution equipment and cables are in perfect condition and rated for the current requirements of all connected devices. Do not use the product if the power cable or a power plug is in any way damaged, defective or showing signs of overheating. Do not attempt to open any cover. Refer any service operation not described in this manual to a qualified technician. User Manual 3

4 PROTECTION FROM FIRE Do not stick filters, masks or other materials directly onto LED modules. Do not modify the product in any way not described in this manual. Install only genuine ROE parts in or on the product unless an alternative is described in this manual. Do not operate the product full load if the ambient temperature of power units (Ta) exceeds 45 C (113 F) or less than -20 C(-4 F). Pout/W Vin/Vac PROTECTION FROM INJURY Create an installation by installing tiles at the top and working downwards. Disassemble an installation by removing tiles at the bottom and working upwards. Check that all external covers and rigging hardware are securely fastened. Block access below the work area and work from a stable platform whenever installing, servicing or moving the product. Important warnings Maximum and minimum ambient temperature: The maximum ambient temperature for the LED wall is 45 C; the minimum temperature is (-20 C.) User Manual 4

5 High leakage current: The combination of power boxes in an installation results in increased levels of Leakage current. In order to avoid risk of electric shock due to high leakage current, proper grounding of the installation is required. This equipment MUST be earthed: In order to protect against risk of electric shock, the installation should be properly grounded. Defeating the purpose of the grounding type plug will expose you to the risk of electric shock. Power system Mains cords: The power cords delivered with this system have special properties for safety. They are not user Serviceable. If the power cords are damaged, replace them only with new ones. Never try to repair a power cord. Data cables: The data cables provided with this system have special properties for safety. They are not user serviceable. If the data cables are damaged, replace them only with new ones. Never try to repair a data cable. Per requirements of the National Electrical Code in the USA, the length of a data cable must not exceed 100 m (332 feet). Avoid exposure of data cables to accidental contact with lightning or power conductors. LINX LED Curtains cannot be hot swapped: Always disconnect the power cord from the control box before connecting or disconnecting the cable string or one of LINX LED Curtains. User Manual 5

6 02 Specification: Linx LED Curtains is lightweight and virtually transparent indoor LED display. They offer wide viewing angles with excellent image integrity and color uniformity, owning the common characteristics of lightweight and firm structure. With the amazing flexibility and high density, both of them can be able to multi-angle folded, satisfy your solution for applications with long viewing distances. Linx-37 Specification: Linx-37 s: Pixel Pitch LED Type Max. Brightness(Nit or CD/m²) Transparency Module Size(W H D) Module Area Pixels/Module Pixels/m² Viewing Horizontal/Vertical /Module Max.hanging(In vertical) IP(Front/Reverse) Gray Scale Scan Refresh Rate Max Powe/Module Certifications Working Temperature 37.5mm White SMD 3 in (NationStar 3535) 64% 300mm 1200mm 11mm/ m² / kg / 4.4lbs 20pcs(24m) IP65 16bit Static 4000Hz 80W ETL/TUV/CE -20 C to 45 C 1196mm Note: The parameter of Max.hanging is only for your information, exact situation depends on the real conditions on site! 300mm 11mm Rear components: Data Out Horizontal Spring Pin Data In Power Out Connection edge buckle Power In User Manual 6

7 03 Connection: AC 220V AC 220V Evision POWER/DATA BOX POWER/DATA BOX tiles high Linx-37 Built in Power Supply User Manual 7

8 04 Accessories : Evision : S0007 : W480 H45 D240mm : 2.30kg : Data Cable : S0193 : 30M : 2.40kg : Data Cable : S0061 : 2M : 0.35kg : Power Cable : S(0443/0437) : 5M/30M : 1.80kg/8.2kg : Power Box : S0020 : W480 H135 D335mm : 14.25kg : Power Cable : S0486 : 1.6m : 0.40kg : Data Cable : S0168 : 1.6M : 0.10kg : Hanging Bar : S(0013/14/15) : 0.3M/0.6M/1.2M : 1kg/2.15kg/4.25kg : Power Cable : S0245 : 2M : 0.20kg Max Capacity : Flightcase : : W1296 H567 D717mm : 20 tiles of Linx-37 User Manual 8

9 05 Header Assembly: Header The header for Linx-37 contains 3 kinds: Code S0015 Header 1.2meter 4250g S0014 Header 0.6meter 2150g S0013 Header 0.3meter 1000g Figure1: Clamp Figure2: Headers Figure 3: Header Connection Bracket. User Manual 9

10 06 Physical Connection: Tiles connection Figure 1: Horizontal locking in a flat-screen array: Figure 2: Vertical locking in a flat-screen array: 1. Turn the lock as the arrowhead shows. 2. Pull the lock in. 3. Loosen hands let the connectors in. 4. Plug the clasp for insurance. User Manual 10

11 07 Control System: The control system of Linx 37 consist of receiving card and sending card. Receiving card is integrated with Receiving box. Specifications Working v oltage Power V AC 20W Working temperature -20 C to 45 C Input port DVI Output ports number 4 ports Communication port USB/RJ45 Max Resolution(Input) Hz Data transmission port Gigabit Ethernet Material AL6061 W480 H45 D240mm 2.30kg Evision (201000S0007) Diagram: Front Black OK Menu DVI HDMI Esc Fn Behind DVI HDMI USB1 USB2 PORT 1 PORT 2 PORT 3 PORT 4 INPUT V AC 50/60HZ 1. Power switch 2. Number keys 3. LCD screen 4. Function keys 5. Knob 6. DVI port 7. HDMI port 8. USB port 9. RJ45 data port 10. Power port Software: Please read software manual firstly, (download link as below): User Manual 11

12 Power/Receiving box Working Voltage Output power Working temperature Data output port number Output ports number Max Capacity Mouting Data transmission port Material IP VAC or VAC 2000W -20 C~50 C RJ45 2 ports 6 tiles high per port Fixed on the Head Gigabit Ethernet SPCC L591xW274xH136mm 14.25kg IP63 Power/Receiving box 135mm 480mm 274mm Power/Receiving box User Manual 12

13 Power box installation: The Power box can be suspended on the truss,also can be settled on the ground in smart flight case. Figure 1: Installation on the truss Figure 2: Installation in the flight case User Manual 13

14 Power box installation: The Power box can be suspended on the truss,also can be settled on the ground in smart flight case. Figure 1: Installation on the truss Figure 2: Installation in the flight case User Manual 14

15 08 Maintenance When a LED fail to work, we need to replace the LED module User Manual 15

16 09 Package 20 pcs LED tiles per flightcase s: 1, , Picture: User Manual 16

17 ROE Visual Europe B.V Zernikelaan 2a, 9351VA Leek, The Netherlands. E: T: ROE Visual Co., Ltd Bldg 7, Zhong Yuntai Industrial Park, Shiyan Town, Shenzhen, China. E: T: F: ROE Visual US, Inc N Naomi Street, Burbank, CA, E: usa@roevisual.com T: User Manual 17