USTER ZWEIGLE TWIST TESTER 5-SA

Transcription

1 USTER ZWEIGLE TWIST TESTER 5-SA The yarn analysis system Technical Data February 2014

2 Testing and analyzing the twist level of yarns Basic Installation Overall Installation Functions: Absolute measurement of the twist level and twist multiplier of yarns 5 different test methods are available: Test method 1: Single untwist-retwist method Test method 2: Double untwist-retwist method Test method 3: Slippage method Test method 4: Direct counting method Test method 5: Multiple untwist-retwist method Collection, evaluation and storage of measurement values Versions: USTER ZWEIGLE TWIST TESTER 5-SA for normal count (finer than 300 tex, Nm 3.3, Ne 2.0) USTER ZWEIGLE TWIST TESTER 5-SA for coarse count (coarser than 300 tex, Nm 3.3, Ne 2.0) Included in the delivery: TESTING INSTRUMENT Single-package carrier Application software * Computer and peripherals have to be provided by the customer USTER ZWEIGLE TWIST TESTER 5-SA 2 (5)

3 Application Software Reports Type of reports: Test reports of measurement series Limit values: Determination of fixed limit values Verification of measured values Measured values which exceed the set limit values will be marked Numerical Output Twist: Determination of the twist level per meter or per inch of Results Alpha: Determination of the twist multiplier STATISTICS Statistical values: Overall result protocol with statistical data for each result column Mean value Coefficient of variation CV Min. value Max. value Graphic Output Diagram: Overall result protocol with statistical data for each result columns Shows the individual measurement and their deviation from the set target Frequency distribution diagram: Representation of the parameter variations within single tests Input of Data, Dialog and English, German, French, Italian, Spanish, Turkish or Chinese can be selected via Output of Results, report languages: the operating menu (other languages on request) Languages, Units Possible units: Twist: T/m or T/ Twist direction: Z or S Count: ktex, tex, dtex, Nm, Nec Test length: Semi-automatic version: 10 mm to 500 mm (0.4 to 20 inch) Self Test Function check: Initiated automatically when the installation is switched on USTER ZWEIGLE TWIST TESTER 5-SA 3 (5)

4 General General Ambient Room climate: The ambient conditions must be maintained in order to avoid any influence on the Conditions test material (ISO 139) Humidity: (65±4)% relative humidity for standard atmosphere and (50±4)% for standard alternative atmosphere Temperature: (20±2) C for standard atmosphere and (23±2) C for standard alternative atmosphere Installation Data Electrical connections: Single phase mains with protective conductor Mains voltage range / frequency: 110 to 230 VAC; +6/-10%; 48 to 62 Hz Power consumption: Max. 50 VA Dimension Length 140 cm, width 36 cm, height 20 cm Gross Weight of the Standard: approx. 13 kg Basic Installation Total: approx. 20 kg USTER ZWEIGLE TWIST TESTER 5-SA 4 (5)

5 hthe YARN PROCESS CONTROL SYSTEM PC Hardware / Program Versions / Installation The configuration described below is to be understood as a minimum configuration. The PC can be obtained by customer, the RSC or the LSS from a local dealer, or the complete system can be ordered from Uster Technologies. Important The PC, all I/O cards as well as the drivers have to be compatible with Windows 7 (32bit & 64bit) / Windows XP Motherboard Processor: Compatible for Windows 7 (32bit & 64bit) / Windows XP We recommend an Intel processor with at least a frequency > 2 GHz Memory 1 GB Memory I/Os required 1x serial Port, COM 1 10, or 1x USB serial Port, COM 1 10 Drives If backup is done over Network: 1x Fast HDD >= 80 GB or more Otherwise: 2x Fast HDD >= 80 GB or more 1x DVD Drive Graphic Controller Enabling 1024 x 768 resolution, true color mandatory, 8 MByte RAM Peripheral Components Bus Mouse Monitor: 17 TFT LCD screen Printer: We strongly recommend using a HP DeskJet family printer Operating System Windows 7 (32bit & 64bit) Uster Technologies has made all reasonable efforts to ensure that all information is accurate at the time of publication. Hereby it is declared that alterations to the product may be possible at any time. In these cases the information contained in this technical datasheet is subject to change without notice. February 2014 Uster Technologies AG Sonnenbergstrasse 10 CH-8610 Uster / Switzerland Phone Fax sales@uster.com / 2014 Uster Technologies AG