Express5800/A2040e/A1040e Configuration Guide

Transcription

1 Express5800/A2040e/A1040e Configuration Guide Introduction This document contains product and configuration information that will enable you to configure your system. The guide will ensure fast and proper configuration of your NEC Express5800 server. The available models depend on sales regions. For details, please contact your region s sales representative. July Rev. 2.0 NEC Corporation

2 Contents TECHNICAL SPECIFICATION... 4 NEC Express5800/A2040e (including COPT supported model)... 4 NEC Express5800/A1040e... 6 EXTERNAL VIEWS... 8 Front and Rear Views... 8 Dimensions (mm) A2040e A1040e CONFIGURATION DIAGRAM A2040e...11 A1040e...11 Expansion Slot SERVER CONFIGURATION Base Models A2040e A1040e COPT CPU Memory Memory Configuration Logical Memory Capacity at Memory Rank Sparing Memory Clock Maximum Memory Capacity Internal Disk Drives RAID Configuration Internal Drive Configuration Optical Drive PCI Card PCI Hot Plug Kit Network Interface Controller External Storage Controller Other Add-in Components Power Supply Unit Redundant Fan Kit Redundant Management Board Trusted Platform Module Kit Internal Flash Memory Add-on Components inch LCD Console Unit KVM Switch Server Management License Front Bezel Cable Arm Management Console Specifications REFERENCES CPU NEC Corporation Rev.2.0 July

3 Memory Internal Drive Connection to RDX (USB) by Device Expansion Unit Server Management PCI Slot: Available Slots and Installation Limitations PCI Card: Priority/Order of Installation RAS Feature Matrix (per OS) Copyright Notice and Liability Disclaimer REVISION HISTORY NEC Corporation Rev.2.0 July

4 Technical Specification NEC Express5800/A2040e (including COPT supported model) Key Features 4U/up to 4way server with high performance with the latest Intel Xeon Scalable Processor Family Up to 6TB of memory capacity, supporting high speed and energy efficient DDR4 memory Redundant resources; clock, service processors (optional), and core I/O components (optional) Capacity Optimization (COPT) supported model separately available in line-up for CPU resource optimization Up to inch HDD/SSD High energy efficiency with 80 PLUS Platinum certified power supply unit Model Name Product Code CPU Chipset Memory Auxiliary Storage Device Expansion Slots Graphics Standard Interface COPT Model Processor Redundant Power Supply Redundant Fan Clock Speed Number of CPUs, min./max. Intel Smart Cache (Last Level Cache) Number of Cores (C) / Thread (T) per CPU Capacity, standard/maximum Memory Module Maximum Clock Speed Error Check, Correction Rank Sparing Memory Mirroring Internal (standard) Disk Internal (maximum) Drive Hot Plug Interface / RAID Level Optical Disk Drive FDD Expansion Bay Supported Slots (*2) Chip/Video RAM Graphic Display / Resolution External Dimensions (width x depth x height) Weight (min.*3 / max.) Power Consumption (100V max. configuration, 25 Standby) (100V max. configuration, 25 High Load) (100V max. configuration, Maximum) (200V max. configuration, 25 Standby) (200V max. configuration, 25 High Load) (200V max. configuration, Maximum) Calorific Value (KJ/h) Intel Xeon Processor Platinum 8180M Intel Xeon Processor Platinum 8180 Express5800/A2040e NE F NE F Intel Xeon Processor Platinum 8176M Intel Xeon Processor Platinum 8176 Intel Xeon Processor Platinum GHz 2.10GHz 2.10GHz 2/4 38.5MB 28C/56T Intel C620 chipset Not pre-installed RDIMM : 1.5TB (48x 32GB), RDIMM-3DS : 6TB (48x 128GB) DDR RDIMM (8/16/32GB), DDR RDIMM-3DS (64/128GB) 2666MHz ECC, SDDC, ADDDC Supported Supported inch HDD: SAS 9.6TB (8x 1.2TB), 2.-inch SSD: SAS 3.2TB (8x 400GB) Supported SAS 12Gb/s : RAID 0/1/5/6/10/50/60 (optional) - * x PCI Express 3.0 (x16 lane, x16 socket) (Low profile, mm in length) 8x PCI Express 3.0 (x8 lane, x8 socket) (Low profile, mm in length) 33MB 24C / 48T Embedded in management controller chip / 8MB 16,770,000 colors: 640x480, 800x600, 1,024x768, 1,152x864, 1,280x1,024, 1,600x1,200 2x USB3.0 (1x front, 1x rear), 1x USB2.0 (1x internal) 1x SUV (rear) (2x USB2.0, 1x serial port (RS-232C/D-Sub 9pin), 1x Analog RGB (Mini D-Sub 15pin) 2x Management LAN connector (1000BASE-T/100BASE-TX/10BASE-T, RJ-45, 2x rear) Supported (optional, hot-plug available) Supported (standard, hot-plug available) 444.2mm 742.3mm 174.3mm (w/o front bezel/slide rail/protuberance) 482.6mm 928.8mm 175.8mm (including front bezel/slide rail/protuberance) 41.5kg / 57.4kg (including rail) Not pre-installed AC Power Unit 1000W/1600W 80 PLUS Platinum, hot plug (max. 4 units) AC100V/200V±10%, 50/60Hz±3Hz 863VA/846W 863VA/846W 863VA/846W 863VA/846W 863VA/846W 2827VA/2771W 2781VA/2725W 2655VA/2602W 2608VA/2556W 2543VA/2492W 2899VA/2841W 2853VA/2796W 2726VA/2672W 2680VA/2626W 2615VA/2563W 859VA/842W 859VA/842W 859VA/842W 859VA/842W 859VA/842W 2813VA/2757W 2767VA/2712W 2641VA/2589W 2595VA/2543W 2531VA/2480W 2885VA/2827W 2838VA/2782W 2713VA/2659W 2666VA/2613W 2602VA/2550W 10228KJ/h 10064KJ/h 9619KJ/h 9454KJ/h 9226KJ/h Environmental Requirements: Temperature Operating: 10 to 35, Non-operating: -10 to 55 Operating: 10 to 40 Non-operating: -10 to 55 Environmental Requirements: Humidity Accessories Regulatory and Safety Operating: 20 to 80%, Non-operating: 20 to 80% (no condensation either operating or non-operating) EXPRESSBUILDER(ESMPRO/ServerManager(Windows), ESMPRO/ServerAgentService, Users Guide (including e-document), Start-up Guide, SUB Cable, Rack Mount Kit, TeDoLi (diag. tool) FCC, UL, CE, BSMI, RoHS, WEEE Installed OS Supported OS (NEC Support) - Microsoft Windows Server 2016 Standard, Microsoft Windows Server 2016 Datacenter Red Hat Enterprise Linux 7.4 VMware ESXi 6.5 Update 1 *1 External DVD Dual Drive should be installed for maintenance and/or OS re-installation purpose. *2 Available number of the Expansion Slot depends on the number of CPUs. *3 Min. Configuraiton: (2x CPU, 2x DIMM, 1x RAID Controller, 1x 1600W PSU) NEC Corporation Rev.2.0 July

5 Model Name Product Code CPU Chipset Memory Auxiliary Storage Device Expansion Slots Graphics Standard Interface COPT Model Processor Redundant Power Supply Redundant Fan Clock Speed Number of CPUs, min./max. Intel Smart Cache (Last Level Cache) Number of Cores (C) / Thread (T) per CPU Capacity, standard/maximum Memory Module Maximum Clock Speed Error Check, Correction Rank Sparing Memory Mirroring Internal (standard) Disk Internal (maximum) Drive Hot Plug Interface / RAID Level Optical Disk Drive FDD Expansion Bay Supported Slots (*2) Chip/Video RAM Graphic Display / Resolution External Dimensions (width x depth x height) Weight (min.*3 / max.) Power Consumption (100V max. configuration, 25 Standby) (100V max. configuration, 25 High Load) (100V max. configuration, Maximum) (200V max. configuration, 25 Standby) (200V max. configuration, 25 High Load) (200V max. configuration, Maximum) Calorific Value (KJ/h) Environmental Requirements: Temperature Environmental Requirements: Humidity Accessories Regulatory and Safety Intel Xeon Processor Gold 6150 Intel Xeon Processor Gold 6136 Intel Xeon Processor Gold 6144 Express5800/A2040e NE F NE F Intel Xeon Processor Gold 5115 Intel Xeon Processor Platinum 8156 Intel Xeon Processor Gold GHz 3.00GHz 3.50GHz 2.40GHz 3.60GHz 3.60GHz 2/ MB 13.75MB 16,5MB 18C / 36T 12C / 24T 8C / 16T 10C / 20T 4C / 8T 4C / 8T Intel C620 chipset Not pre-installed RDIMM : 1.5TB (48x 32GB), RDIMM-3DS : 6TB (48x 128GB) DDR RDIMM (8/16/32GB), DDR RDIMM-3DS (64/128GB) 2666MHz ECC, SDDC, ADDDC Supported Supported inch HDD: SAS 9.6TB (8x 1.2TB), 2.-inch SSD: SAS 3.2TB (8x 400GB) Supported SAS 12Gb/s : RAID 0/1/5/6/10/50/60 (optional) - * x PCI Express 3.0 (x16 lane, x16 socket) (Low profile, mm in length) 8x PCI Express 3.0 (x8 lane, x8 socket) (Low profile, mm in length) Embedded in management controller chip / 8MB 16,770,000 colors: 640x480, 800x600, 1,024x768, 1,152x864, 1,280x1,024, 1,600x1,200 2x USB3.0 (1x front, 1x rear), 1x USB2.0 (1x internal) 1x SUV (rear) (2x USB2.0, 1x serial port (RS-232C/D-Sub 9pin), 1x Analog RGB (Mini D-Sub 15pin) 2x Management LAN connector (1000BASE-T/100BASE-TX/10BASE-T, RJ-45, 2x rear) Supported (optional, hot-plug available) Supported (standard, hot-plug available) 444.2mm 742.3mm 174.3mm (w/o front bezel/slide rail/protuberance) 482.6mm 928.8mm 175.8mm (including front bezel/slide rail/protuberance) 444.2mm 742.3mm 174.3mm (w/o front bezel/slide rail/protuberance) Not pre-installed AC Power Unit 1000W/1600W 80 PLUS Platinum, hot plug (max. 4 units) AC100V/200V±10%, 50/60Hz±3Hz 2400MHz 863VA/846W 863VA/846W 863VA/846W 863VA/846W 863VA/846W 863VA/846W 2608VA/2556W 2543VA/2492W 2543VA/2492W 2263VA/2217W 2349VA/2302W 2349VA/2302W 2680VA/2626W 2615VA/2563W 2615VA/2563W 2334VA/2288W 2421VA/2372W 2421VA/2372W 859VA/842W 859VA/842W 859VA/842W 859VA/842W 859VA/842W 859VA/842W 2595VA/2543W 2531VA/2480W 2531VA/2480W 2251VA/2206W 2337VA/2290W 2337VA/2290W 2666VA/2613W 2602VA/2550W 2602VA/2550W 2323VA/2276W 2409VA/2360W 2409VA/2360W 9454KJ/h 9226KJ/h 9226KJ/h 8236KJ/h 8540KJ/h 8540KJ/h Operating: 10 to 40 Non-operating: -10 to 55 Operating: 10 to 40 Non-operating: -10 to 55 Operating: 10 to 40 Non-operating: -10 to 55 Operating: 20 to 80%, Non-operating: 20 to 80% (no condensation either operating or non-operating) EXPRESSBUILDER(ESMPRO/ServerManager(Windows), ESMPRO/ServerAgentService, Users Guide (including e-document), Start-up Guide, SUB Cable, Rack Mount Kit, TeDoLi (diag. tool) FCC, UL, CE, BSMI, RoHS, WEEE Installed OS Supported OS (NEC Support) *1 External DVD Dual Drive should be installed for maintenance and/or OS re-installation purpose. *2 Available number of the Expansion Slot depends on the number of CPUs. *3 Min. Configuraiton: (2x CPU, 2x DIMM, 1x RAID Controller, 1x 1600W PSU) - Microsoft Windows Server 2016 Standard, Microsoft Windows Server 2016 Datacenter Red Hat Enterprise Linux 7.4 VMware ESXi 6.5 Update 1 NEC Corporation Rev.2.0 July

6 NEC Express5800/A1040e Key Features 4U/up to 4way server with high performance with the latest Intel Xeon Scalable Processor Family Up to 6TB of memory capacity, supporting high speed and energy efficient DDR4 memory Up to inch HDD/SSD High energy efficiency with 80 PLUS Platinum certified power supply unit Model Name Product Code CPU Chipset Memory Auxiliary Storage Device Expansion Slots Graphics Standard Interface Weight (min.*3 / max.) Power Consumption COPT Model Processor Redundant Power Supply Redundant Fan Clock Speed Number of CPUs, min./max. Intel Smart Cache (Last Level Cache) Number of Cores (C) / Thread (T) per CPU Capacity, standard/maximum Memory Module Maximum Clock Speed Error Check, Correction Rank Sparing Memory Mirroring Internal (standard) Disk Internal (maximum) Drive Hot Plug Interface / RAID Level Optical Disk Drive FDD Expansion Bay Supported Slots (*2) Chip/Video RAM Graphic Display / Resolution External Dimensions (width x depth x height) (100V max. configuration, 25 Standby) (100V max. configuration, 25 High Load) (100V max. configuration, Maximum) (200V max. configuration, 25 Standby) (200V max. configuration, 25 High Load) (200V max. configuration, Maximum) Calorific Value (KJ/h) Intel Xeon Processor Platinum 8180M Intel Xeon Processor Platinum 8180 Express5800/A1040e NE F - Intel Xeon Processor Platinum 8176M Intel Xeon Processor Platinum 8176 Intel Xeon Processor Platinum GHz 2.10GHz 2.10GHz 1/4 38.5MB 28C/56T Intel C620 chipset Not pre-installed RDIMM : 1.5TB (48x 32GB), RDIMM-3DS : 6TB (48x 128GB) DDR RDIMM (8/16/32GB), DDR RDIMM-3DS (64/128GB) 2666MHz ECC, SDDC, ADDDC Supported Supported inch HDD: SAS 9.6TB (8x 1.2TB), 2.-inch SSD: SAS 3.2TB (8x 400GB) Supported SAS 12Gb/s : RAID 0/1/5/6/10/50/60 (optional) - * x PCI Express 3.0 (x16 lane, x16 socket) (Low profile, mm in length) 5x PCI Express 3.0 (x8 lane, x8 socket) (Low profile, mm in length) 33MB 24C / 48T Embedded in management controller chip / 8MB 16,770,000 colors: 640x480, 800x600, 1,024x768, 1,152x864, 1,280x1,024, 1,600x1,200 2x USB3.0 (1x front, 1x rear), 1x USB2.0 (1x internal) 1x SUV (rear) (2x USB2.0, 1x serial port (RS-232C/D-Sub 9pin), 1x Analog RGB (Mini D-Sub 15pin) 1x Management LAN connector (1000BASE-T/100BASE-TX/10BASE-T, RJ-45, 2x rear) Supported (optional, hot-plug available) Supported (standard, hot-plug available) 444.2mm 742.3mm 174.3mm (w/o front bezel/slide rail/protuberance) 482.6mm 928.8mm 175.8mm (including front bezel/slide rail/protuberance) 39.9kg / 55.6kg (including rail) Not pre-installed AC Power Unit 1000W/1600W 80 PLUS Platinum, hot plug (max. 4 units) AC100V/200V±10%, 50/60Hz±3Hz 802VA/786W 802VA/786W 802VA/786W 802VA/786W 802VA/786W 2741VA/2686W 2695VA/2641W 2569VA/2517W 2522VA/2471W 2457VA/2408W 2813VA/2757W 2766VA/2711W 2640VA/2588W 2594VA/2542W 2529VA/2478W 798VA/782W 798VA/782W 798VA/782W 798VA/782W 798VA/782W 2728VA/2673W 2681VA/2628W 2556VA/2505W 2509VA/2459W 2445VA/2396W 2799VA/2743W 2753VA/2698W 2627VA/2575W 2581VA/2529W 2516VA/2466W 9924KJ/h 9760KJ/h 9315KJ/h 9151KJ/h 8922KJ/h Environmental Requirements: Temperature Operating: 10 to 35, Non-operating: -10 to 55 Operating: 10 to 40 Non-operating: -10 to 55 Environmental Requirements: Humidity Accessories Regulatory and Safety Operating: 20 to 80%, Non-operating: 20 to 80% (no condensation either operating or non-operating) EXPRESSBUILDER(ESMPRO/ServerManager(Windows), ESMPRO/ServerAgentService, Users Guide (including e-document), Start-up Guide, SUB Cable, Rack Mount Kit, TeDoLi (diag. tool) FCC, UL, CE, BSMI, RoHS, WEEE Installed OS Supported OS (NEC Support) - Microsoft Windows Server 2016 Standard, Microsoft Windows Server 2016 Datacenter Red Hat Enterprise Linux 7.4 VMware ESXi 6.5 Update 1 *1 External DVD Dual Drive should be installed for maintenance and/or OS re-installation purpose. *2 Available number of the Expansion Slot depends on the number of CPUs. *3 Min. Configuraiton: (1x CPU, 2x DIMM, 1x RAID Controller, 1x 1600W PSU) NEC Corporation Rev.2.0 July

7 Model Name Product Code CPU Chipset Memory Auxiliary Storage Device Expansion Slots Graphics Standard Interface COPT Model Processor Redundant Power Supply Redundant Fan Clock Speed Number of CPUs, min./max. Intel Smart Cache (Last Level Cache) Number of Cores (C) / Thread (T) per CPU Capacity, standard/maximum Memory Module Maximum Clock Speed Error Check, Correction Rank Sparing Memory Mirroring Internal (standard) Disk Internal (maximum) Drive Hot Plug Interface / RAID Level Optical Disk Drive FDD Expansion Bay Supported Slots (*2) Chip/Video RAM Graphic Display / Resolution External Dimensions (width x depth x height) Weight (min.*3 / max.) Power Consumption (100V max. configuration, 25 Standby) (100V max. configuration, 25 High Load) (100V max. configuration, Maximum) (200V max. configuration, 25 Standby) (200V max. configuration, 25 High Load) (200V max. configuration, Maximum) Calorific Value (KJ/h) Environmental Requirements: Temperature Environmental Requirements: Humidity Accessories Regulatory and Safety Intel Xeon Processor Gold 6150 Intel Xeon Processor Gold 6136 Intel Xeon Processor Gold 6144 Express5800/A1040e NE F - Intel Xeon Processor Gold 5115 Intel Xeon Processor Platinum 8156 Intel Xeon Processor Gold GHz 3.00GHz 3.50GHz 2.40GHz 3.60GHz 3.60GHz 1/ MB 13.75MB 16,5MB 18C / 36T 12C / 24T 8C / 16T 10C / 20T 4C / 8T 4C / 8T Intel C620 chipset Not pre-installed RDIMM : 1.5TB (48x 32GB), RDIMM-3DS : 6TB (48x 128GB) DDR RDIMM (8/16/32GB), DDR RDIMM-3DS (64/128GB) 2666MHz ECC, SDDC, ADDDC Supported Supported inch HDD: SAS 9.6TB (8x 1.2TB), 2.-inch SSD: SAS 3.2TB (8x 400GB) Supported SAS 12Gb/s : RAID 0/1/5/6/10/50/60 (optional) - * x PCI Express 3.0 (x16 lane, x16 socket) (Low profile, mm in length) 5x PCI Express 3.0 (x8 lane, x8 socket) (Low profile, mm in length) Embedded in management controller chip / 8MB 16,770,000 colors: 640x480, 800x600, 1,024x768, 1,152x864, 1,280x1,024, 1,600x1,200 2x USB3.0 (1x front, 1x rear), 1x USB2.0 (1x internal) 1x SUV (rear) (2x USB2.0, 1x serial port (RS-232C/D-Sub 9pin), 1x Analog RGB (Mini D-Sub 15pin) 1x Management LAN connector (1000BASE-T/100BASE-TX/10BASE-T, RJ-45, 2x rear) Supported (optional, hot-plug available) Supported (standard, hot-plug available) 444.2mm 742.3mm 174.3mm (w/o front bezel/slide rail/protuberance) 482.6mm 928.8mm 175.8mm (including front bezel/slide rail/protuberance) 39.9kg / 55.6kg (including rail) Not pre-installed AC Power Unit 1000W/1600W 80 PLUS Platinum, hot plug (max. 4 units) AC100V/200V±10%, 50/60Hz±3Hz 2400MHz 802VA/786W 802VA/786W 802VA/786W 802VA/786W 802VA/786W 802VA/786W 2522VA/2471W 2457VA/2408W 2457VA/2408W 2176VA/2133W 2263VA/2218W 2263VA/2218W 2594VA/2542W 2529VA/2478W 2529VA/2478W 2248VA/2203W 2335VA/2288W 2335VA/2288W 798VA/782W 798VA/782W 798VA/782W 798VA/782W 798VA/782W 798VA/782W 2509VA/2459W 2445VA/2396W 2445VA/2396W 2166VA/2122W 2252VA/2206W 2252VA/2206W 2581VA/2529W 2516VA/2466W 2516VA/2466W 2237VA/2192W 2323VA/2276W 2323VA/2276W 9151KJ/h 8922KJ/h 8922KJ/h 7932KJ/h 8236KJ/h 8236KJ/h Operating: 10 to 40 Non-operating: -10 to 55 Operating: 10 to 40 Non-operating: -10 to 55 Operating: 10 to 40 Non-operating: -10 to 55 Operating: 20 to 80%, Non-operating: 20 to 80% (no condensation either operating or non-operating) EXPRESSBUILDER(ESMPRO/ServerManager(Windows), ESMPRO/ServerAgentService, Users Guide (including e-document), Start-up Guide, SUB Cable, Rack Mount Kit, TeDoLi (diag. tool) FCC, UL, CE, BSMI, RoHS, WEEE Installed OS Supported OS (NEC Support) *1 External DVD Dual Drive should be installed for maintenance and/or OS re-installation purpose. *2 Available number of the Expansion Slot depends on the number of CPUs. *3 Min. Configuraiton: (1x CPU, 2x DIMM, 1x RAID Controller, 1x 1600W PSU) - Microsoft Windows Server 2016 Standard, Microsoft Windows Server 2016 Datacenter Red Hat Enterprise Linux 7.4 VMware ESXi 6.5 Update 1 NEC Corporation Rev.2.0 July

8 External Views Front and Rear Views Front View Legend A SYSTEM POWER Switch K LAN POWER LED (K1 only for A1040e) B UID (Unit ID) Switch L BMC Reset Switch (L1 only for for A1040e) C Clear Switch M SYSTEM POWER LED D NMI Switch N UID (Unit ID) LED E BMC Ready LED O SYSTEM STATUS LED F BMC OFF Switch P USB Connector G Control Switch Q 2.5-inch Hard Drive Bay H SYSTEM AC POWER LED R Auxiliary Cooling Fan Module (AFM) I Control LED S Slide Tag J LAN Connector (Maintenance LAN) (J1 only for A1040e) NEC Corporation Rev.2.0 July

9 Rear View Legend A LAN Connector (Management LAN) (A1 only for A1040e) E PCI Card Expansion Slot 2 B USB Connector F Power Supply Unit C SUV Cable Connector 1 G IOB ALARM LED D UID (Unit ID) LED H Rear Connector Module (RCM) 1 2x USB Connectors and 1x Serial Port and 1x VGA Connector are available through SUV Cable (attachement to the server, 2m length) 2 For A1040e, max. 13 slots NEC Corporation Rev.2.0 July

10 Dimensions (mm) A2040e A1040e The above illustrations includes front bezel and slide rail (mount kit). NEC Corporation Rev.2.0 July

11 Configuration Diagram A2040e Legend: Standard components Minimum required components A1040e Legend: Standard components Minimum required components NEC Corporation Rev.2.0 July

12 Expansion Slot Slot #8 Slot #7 Slot #6 Slot #5 Slot #4 Slot #3 Slot #2 Slot #1 Slot #9 Slot #10 Slot #11 Slot #12 Slot #13 Slot #14 Slot #15 Slot #16 Legend A2040e- A1040e Slot #1 Slot #2 Slot #3 Slot #4 Slot #5 Slot #6 Slot #7 Slot #8 Slot #9 Slot #10 Slot #11 Slot #12 Slot #13 Slot #14 Slot #15 PCI Express 3.0 (x8 lane, x8 socket) PCI Express 3.0 (x8 lane, x8 socket) PCI Express 3.0 (x16 lane, x16 socket) PCI Express 3.0 (x16 lane, x16 socket) PCI Express 3.0 (x8 lane, x8 socket) PCI Express 3.0 (x8 lane, x8 socket) PCI Express 3.0 (x16 lane, x16 socket) PCI Express 3.0 (x16 lane, x16 socket) (A2040e only) PCI Express 3.0 (x8 lane, x8 socket) PCI Express 3.0 (x8 lane, x8 socket) PCI Express 3.0 (x16 lane, x16 socket) PCI Express 3.0 (x16 lane, x16 socket) (A2040e only) PCI Express 3.0 (x8 lane, x8 socket) (A2040e only) PCI Express 3.0 (x8 lane, x8 socket) PCI Express 3.0 (x16 lane, x16 socket) Slot #16 PCI Express 3.0 (x16 lane, x16 socket) For all PCI slots: Low Profile, mm in length For A2040e: Slot#1 to #8 are available in case of 2CPU configuration, Slot#1 to #12 are available in case of 3CPU configuration. All slots (Slot#1 to #16) are available in case of 4CPU configuration. For A1040e: Slot#1 to #4 are available in case of 1CPU configuration, Slot#1 to #8 are available in case of 2CPU configuration, Slot#10 to #12 are available in case of 3CPU configuration (Slot#9 is NOT available), Slot#1 to #8, Slot#10 to # 11 and Slot#15 to 16 are available in case of 4CPU configuration (Slot#9, #13 and #14 are NOT available) Hot Plug supported: Slot #2 to #16 (15 slots) (not supported with A1040e) NEC Corporation Rev.2.0 July

13 Server Configuration 1 Base Models 1.1 A2040e Product Name/Description NEC Express5800/A2040e No processor, no RAM, no HDD, no ODD, no Power Supply Unit, no OS NEC Express5800/A2040e (COPT) No processor, no RAM, no HDD, no ODD, no Power Supply Unit, no OS Part Number NE F NE F The base models must be ordered with CPU Boards (at least 2), Memory, Power Supply Units. Power cables should be ordered as well for each geo. Front Bezel and Cable Arm are not attached; need to be ordered separately if required. Number of the available PCI Slots and Memory depends on the number of CPUs. <Available PCI Slots and Maximum No. of Memory> No. of CPU Max. No. of DIMM Available PCI Slots #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15 # Y Y Y Y Y Y Y Y 3 36 Y Y Y Y Y Y Y Y Y Y Y Y 4 48 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y 1.2 A1040e Product Name/Description NEC Express5800/A1040e No processor, no RAM, no HDD, no ODD, no Power Supply Unit, no OS Part Number NE F The base models must be ordered with CPU Boards, Memory, Power Supply Units. Power cables should be ordered as well for each geo. Front Bezel and Cable Arm are not attached; need to be ordered separately if required. Number of the available PCI Slots and Memory depends on the number of CPUs. <Available PCI Slots and Maximum No. of Memory> No. of CPU Max. No. of DIMM Available PCI Slots #1 #2 #3 #4 #5 #6 #7 #8 #10 #11 #12 #15 # Y Y Y Y 2 24 Y Y Y Y Y Y Y Y 3 36 Y Y Y Y Y Y Y Y Y Y Y 4 48 Y Y Y Y Y Y Y Y Y Y Y Y Y NEC Corporation Rev.2.0 July

14 1.3 COPT Capacity Optimization (COPT) is a function to optimize computing resources by enabling CPU cores as many required per workload without any impact to the number of DIMM and PCI slots which depends on CPU configuration. When necessary, CPU core can be enabled additionally on-site. COPT is available only with A2040e COPT supported model (NEC Express5800/A2040e (COPT)). In order to enable CPU core, Core Activation Key should be ordered for the required number of cores. Product Name/Description One Core Activation Key (for Embedded) Need to order at the same time of ordering the server. As many CPU cores as the ordered number of the One Core Activation Key (for Embedded) are to be enabled when the ordered server is shipped. Up to the ordered number of the One Core Activation Key (for Embedded), CPU cores are available for use. One Core Activation Key (for Add-on) The CPU core can be additionally enabled on-site by ordering the One Core Activation Key (for Add-on). As many Code Words as the ordered number of the One Core Activation Key (for Add-on) are shipped, and additional CPU core can be enabled by applying the Code Word to the server. Part Number NE3401-H101F NE3401-H102F Contact to our sales representative for software supporting COPT function. When enabling CPU core (or socket) by Core Activation Key, please purchase required software license as appropriate In case of using socket license based software, please enable CPU core at the CPU socket on which the software is operating. Software license is required for the socket with at least one enabled CPU core Depending on the OS, the server may need to be rebooted to enable CPU cores. Remarks to use COPT under Linux environment: - When using Fibre Channel Controller (16Gbps) [NE A/158A], need to enable enough number of CPU cores to have 4 or more logical processors, Remarks to use COPT under Windows environment - Depending on the number of enabled CPU cores, PCI card to be installed is limited. Please refer for the details to Installation Limitations for Windows. Remarks to use COPT under VMware environment: - Need to purchase at least the same number of One Core Activation Key as the number of CPU socket. - Need to enable the same number of CPU cores among all CPUs (excluding CPUs with all cores disabled) <Examples of OK or NOT-OK configuration in case of 4CPU configuration> Ex.1: OK Ex.2: OK Ex.3: NOT-OK Ex.4: NOT-OK CPU1: 1 core enabled CPU1: 4 core enabled CPU1: 1 core enabled CPU1: 2 core enabled CPU2: 1 core enabled CPU2: 0 core enabled CPU2: 1 core enabled CPU2: 1 core enabled CPU3: 1 core enabled CPU3: 0 core enabled CPU3: 1 core enabled CPU3: 1 core enabled CPU4: 1 core enabled CPU4: 0 core enabled CPU4: 0 core enabled CPU4: 0 core enabled For the details, please refer to the latest version of Express5800/A2040e Capacity Optimization (COPT) User's Guide Default setting of Core Optimization Mode is Decentralize, where the enabled CPU cores are distributed to each socket equally. NEC Corporation Rev.2.0 July

15 2 CPU A2040e (min. 2CPU / max. 4CPU)/ A1040e (min. 1CPU / max. 4CPU) Product Name/Description CPU Board for Slot #1 and #2 (for 1st and 2nd processor) CPU Board (28C/Platinum 8180M) Slot1/2 (*CTO*) 1 x Intel Xeon Processor Platinum 8180M (2.50 GHz, 28C/56T, 38.50MB, TDP 205W), 1.5TB/CPU This is CTO categorized item; lead time for delivery is longer than other regular items. CPU Board (28C/Platinum 8180) Slot1/2 1 x Intel Xeon Processor Platinum 8180 (2.50 GHz, 28C/56T, 38.50MB, TDP 205W) CPU Board (28C/Platinum 8176M) Slot1/2 (*CTO*) 1 x Intel Xeon Processor Platinum 8176M (2.10 GHz, 28C/56T, 38.50MB, TDP 165W), 1.5TB/CPU This is CTO categorized item; lead time for delivery is longer than other regular items. CPU Board (28C/Platinum 8176) Slot1/ 2 1 x Intel Xeon Processor Platinum 8176 (2.10 GHz, 28C/56T, 38.50MB, TDP 165W) CPU Board (24C/Platinum 8160) Slot1/2 1 x Intel Xeon Processor Platinum 8160 (2.10 GHz, 24C/48T, 33MB, TDP 150W) CPU Board (18C/Gold 6150) Slot1/2 1 x Intel Xeon Processor Gold 6150 (2.70 GHz, 18C/36T, 24.75MB, TDP 165W) CPU Board (12C/Gold 6136) Slot1/ 2 1 x Intel Xeon Processor Gold 6136 (3.00 GHz, 12C/24T, 24.75MB, TDP 150W) CPU Board (8C/Gold 6144) Slot1/2 1 x Intel Xeon Processor Gold 6144 (3.50 GHz, 8C/16T, 24.75MB, TDP 150W) CPU Board (10C/Gold 5115) Slot1/2 1 x Intel Xeon Processor Gold 5115 (2.40 GHz, 10C/20T, 13.75MB, TDP 85W) CPU Board (4C/Platinum 8156) Slot1/2 1 x Intel Xeon Processor Platinum 8156 (3.60 GHz, 4C/8T, 16.50MB, TDP 105W) The lead time for delivery is longer than other regular items. CPU Board (4C/Gold 5122) Slot1/2 1 x Intel Xeon Processor Gold 5122 (3.60 GHz, 4C/8T, 16.50MB, TDP 105W) CPU Board for Slot #3 and #4 (for 3rd and 4th processor) CPU Board (28C/Platinum 8180M) Slot3/4 (*CTO*) 1 x Intel Xeon Processor Platinum 8180M (2.50 GHz, 28C/56T, 38.50MB, TDP 205W), 1.5TB/CPU This is CTO categorized item; lead time for delivery is longer than other regular items. CPU Board (28C/Platinum 8180) Slot3/4 1 x Intel Xeon Processor Platinum 8180 (2.50 GHz, 28C/56T, 38.50MB, TDP 205W) CPU Board (28C/Platinum 8176M) Slot3/4 (*CTO*) 1 x Intel Xeon Processor Platinum 8176M (2.10 GHz, 28C/56T, 38.50MB, TDP 165W), 1.5TB/CPU This is CTO categorized item; lead time for delivery is longer than other regular items. CPU Board (28C/Platinum 8176) Slot3/4 1 x Intel Xeon Processor Platinum 8176 (2.10 GHz, 28C/56T, 38.50MB, TDP 165W) CPU Board (24C/Platinum 8160) Slot3/4 1 x Intel Xeon Processor Platinum 8160 (2.10 GHz, 24C/48T, 33MB, TDP 150W) CPU Board (18C/Gold 6150) Slot3/4 1 x Intel Xeon Processor Gold 6150 (2.70 GHz, 18C/36T, 24.75MB, TDP 165W) CPU Board (12C/Gold 6136) Slot3/4 1 x Intel Xeon Processor Gold 6136 (3.00 GHz, 12C/24T, 24.75MB, TDP 150W) CPU Board (8C/Gold 6144) Slot3/4 1 x Intel Xeon Processor Gold 6144 (3.50 GHz, 8C/16T, 24.75MB, TDP 150W) CPU Board (10C/Gold 5115) Slot3/4 Part Number NE3301-H101F NE3301-H102F NE3301-H103F NE3301-H104F NE3301-H105F NE3301-H106F NE3301-H107F NE3301-H108F NE3301-H109F NE3301-H110F NE3301-H111F NE3301-H121F NE3301-H122F NE3301-H123F NE3301-H124F NE3301-H125F NE3301-H126F NE3301-H127F NE3301-H128F NE3301-H129F NEC Corporation Rev.2.0 July

16 1 x Intel Xeon Processor Gold 5115 (2.40 GHz, 10C/20T, 13.75MB, TDP 85W) CPU Board (4C/Platinum 8156) Slot3/4 1 x Intel Xeon Processor Platinum 8156 (3.60 GHz, 4C/8T, 16.50MB, TDP 105W) The lead time for delivery is longer than other regular items. CPU Board (4C/Gold 5122) Slot3/4 1 x Intel Xeon Processor Gold 5122 (3.60 GHz, 4C/8T, 16.50MB, TDP 105W) NE3301-H130F NE3301-H131F For Slot #1 and #2, CPU Boards for Slot 1/2 should be installed, while for Slot #3 and #4, CPU Boards for Slot 3/4 should be installed. CPU Boards with different CPU SKU cannot be mixed in a server. Having CPUs with TDP 205W (Platinum 8180M/8180) or 150W (Gold 6144) in an environment of more than 25 intake air temperature may cause larger noise than usual, depending on the status of server operation. CPU Functions Intel Xeon Processors for this server supports the following CPU functions Category 64 bit Intel bit function Power Saving Power Saving Performance Performance Virtualization Security Function Name/Summary Enhanced Intel SpeedStep Technology (Intel Demand Bases Switching Technology) Technology to decrease power consumption by adjusting voltage/clock per CPU workload Intel SpeedShift Technology Technology to decrease power consumption by adjusting CPU clock Intel Turbo Boost Technology Technology to boost clock frequency Intel Hyper-Threading Technology Technology to use one core as two threads Intel Virtualization Technology Technology to provide hardware (CPU) support for processor virtualization Execute Disable Technology to avoid the execution of malware utilizing buffer over flow error The maximum number of logical processors supported by OS See the table below for the maximum number of logical processors that you can actually use on your system Maximum Number of Logical Processors Supported by Operating Systems Microsoft Windows Server 2016 Standard Microsoft Windows Server 2016 Datacenter Red Hat Enterprise Linux Oracle Linux 7.3 (x86_64) UEK R VMware ESXi 6.5 Update The maximum number of logical processors when using Hyper-V are below: Windows Server 2016 : 512 Maximum Number of Logical Processors Supported by this Server NEC Corporation Rev.2.0 July

17 3 Memory 3.1 Memory Configuration In addition to the standard features, 2 additional features are available; Memory Rank Sparing and Memory Mirroring. Please go to the appropriate section in accordance with your memory configuration. Memory Configuration Feature Comparison Summary Available Memory Available Memory Channel 1 Maximum Memory Capacity 2 standard Memory Rank Sparing Memory Mirroring - In case of correctable errors, switching to spare memory rank 1/2(8GB RDIMM), 1/2(16GB RDIMM) 3/4,1/2(32GB RDIMM) 7/8,3/4,5/8,1/2 (64GB RDIMM-3DS) of physical memory Redundant memory having the same data 1/2 of physical memory GB(8GB RDIMM) 768GB(16GB RDIMM) 1536GB(32GB RDIMM) 3072GB(64GB RDIMM- 3DS) 192GB(8GB RDIMM) 384GB(16GB RDIMM) 1152GB,768GB (32GB RDIMM) 2688GB,2304GB,1920GB 1536GB(64GB RDIMM-3DS) 192GB(8GB RDIMM) 384GB(16GB RDIMM) 768GB(32GB RDIMM) Data Correction ECC, SDDC, ADDDC Notes RDIMM and LRDIMM cannot be mixed 1 6 memory channels per CPU 2 All DIMMs have the same capacity Need to order memory for sparing Need to order memory for mirroring Customized Configuration Service (at the Server Delivery) Product Name/Description Customized Service: Distribution Mode for COPT Part Number NE3300-SV801 This is the service product for A2040e COPT Model. With this service product, the location of installing Memory can be changed as required from the location defined by the standard BTO Configuration. Up to one item (service) can be ordered per one server. When allocating enabled CPU cores to all CPU (distributed), this service is recommended to use so that Memory can be distributed, too. Please refer to Memory of Reference section for the details. NEC Corporation Rev.2.0 July

18 3.1.1 Memory (standard) Max. 6 sets (12x DIMMs) per CPU Board Category Product Name/Description Part Number Registered DIMM (RDIMM) Registered DIMM 3DS (RDIMM-3DS) 16GB MEM (2x8GB/R/SR) 2x 8GB Registered DIMM, DDR4-2666(PC4-2666), ECC - To be released in Sep./ GB MEM (2x16GB/R/SR) 2x 16GB Registered DIMM, DDR4-2666(PC4-2666), ECC 64GB MEM (2x32GB/R/DR) 2x 32GB Registered DIMM, DDR4-2666(PC4-2666), ECC 128GB MEM (2x64GB/R-3DS/QR) (*CTO*) 2x 64GB Registered DIMM 3DS, DDR4-2666(PC4-2666), ECC - This is CTO categorized item; lead time for delivery is longer than other regular items. 256GB MEM (2x128GB/R-3DS/8R) (*CTO*) 2x 128GB Registered DIMM 3DS, DDR4-2666(PC4-2666), ECC - To be released in Sep./ This is CTO categorized item; lead time for delivery is longer than other regular items. - In case of installing 12 of this product (24 x DIMM), Platinum 8180M or 8176M processors are required. NE3302-H101F NE3302-H102F NE3302-H103F NE3302-H104F NE3302-H105F Not-preinstalled. Need to order at least 1 set (2x DIMM) 5 sets (10x DIMM) per CPU Board is not allowed to configure, in order to avoid performance decrease risk due to unbalanced memory. RDIMM and RDIMM-3DS cannot be mixed in a server NEC Corporation Rev.2.0 July

19 3.1.2 Memory Rank Sparing Max. 3 sets (12x DIMMs) per CPU Board Product Name/Description 32GB MEM for Memory Rank Sparing (4x8GB/R/SR) 4x 8GB Registered DIMM, DDR4-2666(PC4-2666), ECC To be released in Sep./ GBMEM for Memory Rank Sparing (4x16GB/R/SR) 4x 16GB Registered DIMM, DDR4-2666(PC4-2666), ECC 128GB MEM for Memory Rank Sparing (4x32GB/R/DR) 4x 32GB Registered DIMM, DDR4-2666(PC4-2666), ECC 256GB MEM for Memory Rank Sparing (4x64GB/R-3DS/QR) 4x 64GB Registered DIMM 3DS, DDR4-2666(PC4-2666), ECC Part Number NE3302-H111F NE3302-H112F NE3302-H113F NE3302-H114F Not-preinstalled. Need to order at least 1 set (4x DIMM) Different Memory cannot be mixed in a server. 1 spare rank available with 8GB/16GB RDIMM, 1 or 2 spare ranks available with 32GB RDIMM, 1, 2, 3 or 4 spare ranks available with 64GB RDIMM-3DS. Logical Memory Capacity at Memory Rank Sparing The following table shows logical memory capacity at memory rank sparing, showing the capacity per CPU. Physical Memory Capacity No. of DIMM 8GB RDIMM 16GB RDIMM 32GB RDIMM 1 Spare Rank 1 Spare Rank 1 Spare Rank 2 Spare Ranks 4 (not available) (not available) 96GB 64GB 8 32GB 64GB 192GB 128GB 12 48GB 96GB 288GB 192GB 16 64GB 128GB 384GB 256GB 20 80GB 160GB 480GB 320GB 24 96GB 192GB 576GB 384GB GB 224GB 672GB 448GB GB 256GB 768GB 512GB GB 288GB 864GB 576GB GB 320GB 960GB 640GB GB 352GB 1056GB 704GB GB 384GB 1152GB 768GB NEC Corporation Rev.2.0 July

20 3.1.3 Memory Mirroring Max. 4 sets (12x DIMMs) per CPU Board Product Name/Description 24GB MEM for Mirroring (3x8GB/R/SR) 3x 8GB Registered DIMM, DDR4-2666(PC4-2666), ECC To be released in Sep./ GB MEM for Mirroring (3x16GB/R/SR) 3x 16GB Registered DIMM, DDR4-2666(PC4-2666), ECC 96GB MEM for Mirroring (3x32GB/R/DR) 3x 32GB Registered DIMM, DDR4-2666(PC4-2666), ECC Not-preinstalled. Need to order at least 1 set (4x DIMM) Different Memory cannot be mixed in a server. Part Number NE3302-H121F NE3302-H122F NE3302-H123F Memory Clock DDR4 Memory clock is defferent depending on CPU. Please refer to the below for the maximum clock. Please refer to Memory of Reference section for the details, too. CPU Memory No. of DIMM per CPU Memory Clock (1.2V) Xeon Platinum 8180M Platinum 8180 Platinum 8176M Platinum 8176 Platinum 8160 Platinum 8156 Gold 6150 Gold 6136 Gold 6144 Gold 5115 Xeon Gold 5122 RDIMM(8,16,32GB) Up to MHz RDIMM-3DS (64, 128GB) Up to MHz RDIMM(8,16,32GB) Up to MHz RDIMM-3DS (64, 128GB) Up to MHz Maximum Memory Capacity The available memory capacity is different depending on the OS, as the following list shows: Maximum Memory Capacity supported by each OS Microsoft Windows Server 2016 Standard 1 Microsoft Windows Server 2016 Datacenter 1 24 TB 6TB Red Hat Enterprise Linux TB 3 TB Oracle Linux 7.4 (x86_64) UEK R4 64 TB 2 TB VMware ESXi 6.5 Update TB 6 TB 2 1 The Maximum Memory Capacity in using Hyper-V: Windows Server 2016: 24TB Max. Memory Capacity for this Server NEC Corporation Rev.2.0 July

21 2 The Maximum Memory Capacity for virtual machine: 6TB 4 Internal Disk Drives 4.1 RAID Configuration RAID0/1/5/6/10/50/60 is supported. 2 kinds of RAID Controller are supported; with 1GB or 2GB cache. Up to 8 internal drives can be connected. Controller RAID No. of Disk Capacity Hot Spare NE or NE RAID 0 (striping) 1 ~ 8 Drive Capacity x No. of Drive N RAID 1 (mirroring) 2 Drive Capacity x No. of Drive / 2 Y RAID 5 (parity) 3 ~ 8 Drive Capacity x (No. of Drive-1) Y RAID 6 (double parity) 3 ~ 8 Drive Capacity x (No. of Drive-2) Y RAID 10 (RAID1 + RAID0) 4 / 6 / 8 Drive Capacity x No. of Drive / 2 Y RAID 50 (RAID5 + RAID0) 6 / 8 Drive Capacity x (No. of Drive-2) Y RAID 60 (RAID6 + RAID0) 6 / 8 Drive Capacity x (No. of Drive-4) Y Needs to order RAID Controller to configure internal drives For RAID Configuration, same type of internal drives need to be ordered within one RAID group (pack) Multiple RAID group can be configured by one RAID Controller. In case of RAID1, 4 groups at maximum. Different capacity/rotation speed/disk type of internal drives can be mixed among different RAID groups. When configuring hot-spare disks, need to use same type of internal disk for the RAID group. - All internal drives are same type, Global Hot Spare can be available. - When mixing different capacity/rotation speed/disk type drives, need to use Dedicated Hot Spare per RAID group. Please refer to Internal Drive of Reference section for the details about Internal Drive: Priority/Order of Installation. NEC Corporation Rev.2.0 July

22 4.2 Internal Drive Configuration For RAID Configuration, same type of internal drives need to be ordered within one RAID group (pack) With 1 RAID Controller configuration, different HDDs, SDDs or HDD and SSD cannot be configured in the BTO. When mixing these drives, please refer to the section Internal Disk at References. RAID 0/1/5/6/10 can be configured at BTO Configuration. For RAID 50/60, need to configure after the delivery. The delivery lead time of SSD is longer than the others. Please contact to our sales representative for the delivery RAID Controller (2GB Cache/Flash) Configuration Category Product Name/Description Part Number Controller (Need to order 1) Flash Back-up (optional) Cable HDD Cage Internal Drives (Max. 8) SAS HDD SAS SSD (emlc) RAID Controller (2GB, RAID 0/1/5/6) LSI MegaRAID SAS i RAID0/1/5/6/10/50/60, 2GB Cache, Internal 8 port (4x 2connectors), PCIe 3.0(x8), SAS 12Gb/s Flash Back-up Unit LSI MegaRAID SAS i 300mm Flash Back-up Unit Cable attached SAS Cable 1 x mini-sas to 1 x mini-sas, x2 2.5-inch HDD Cage 8x 2.5-inch, Drive Bay, Hot-Plug supported 300GB HDD 1x 300 GB SAS HDD, 2.5-inch, 12Gb/s, 10,000 rpm, 512B sector 600GB HDD 1x 600 GB SAS HDD, 2.5-inch, 12Gb/s, 10,000 rpm, 512B sector 900GB HDD 1x 900 GB SAS HDD, 2.5-inch, 12Gb/s, 10,000 rpm, 512B sector 1.2TB HDD 1x1.2TB SAS HDD, 2.5-inch, 12Gb/s, 10,000 rpm, 512B sector 300GB HDD 1x 300 GB SAS HDD, 2.5-inch, 12Gb/s, 15,000 rpm, 512B sector 600GB HDD 1x 600 GB SAS HDD, 2.5-inch, 12Gb/s, 15,000 rpm, 512B sector 400GB SSD 1x 400 GB SAS SSD, emlc, 2.5-inch, 12Gb/s, 512B sector This is CTO categorized item; lead time for delivery is longer (around 2 months). Need to order at least 1 internal drive, when RAID controller included. NE NE3303-H101 (included) (included) NE A NE A NE A NE A NE A NE A NE A NEC Corporation Rev.2.0 July

23 4.2.2 RAID Controller (1GB Cache/Flash) Configuration Category Product Name/Description Part Number Controller (Need to order 1) Flash Back-up (optional) Cable HDD Cage Internal Drives (Max. 8) SAS HDD SAS SSD (emlc) RAID Contoroller (1GB, RAID 0/1/5/6) LSI MegaRAID SAS i RAID0/1/5/6/10/50/60, 1GB Cache, Internal 8 port (4x 2connectors), PCIe 3.0(x8), SAS 12Gb/s Flash Back-up Unit LSI MegaRAID SAS i 300mm Flash Back-up Unit Cable attached SAS Cable 1 x mini-sas to 1 x mini-sas, x2 2.5-inch HDD Cage 8x 2.5-inch, Drive Bay, Hot-Plug supported 300GB HDD 1x 300 GB SAS HDD, 2.5-inch, 12Gb/s, 10,000 rpm, 512B sector 600GB HDD 1x 600 GB SAS HDD, 2.5-inch, 12Gb/s, 10,000 rpm, 512B sector 900GB HDD 1x 900 GB SAS HDD, 2.5-inch, 12Gb/s, 10,000 rpm, 512B sector 1.2TB HDD 1x1.2TB SAS HDD, 2.5-inch, 12Gb/s, 10,000 rpm, 512B sector 300GB HDD 1x 300 GB SAS HDD, 2.5-inch, 12Gb/s, 15,000 rpm, 512B sector 600GB HDD 1x 600 GB SAS HDD, 2.5-inch, 12Gb/s, 15,000 rpm, 512B sector 400GB SSD 1x 400 GB SAS SSD, emlc, 2.5-inch, 12Gb/s, 512B sector This is CTO categorized item; lead time for delivery is longer (around 2 months). Need to order at least 1 internal drive, when RAID controller included. NE NE3303-H101 (included) (included) NE A NE A NE A NE A NE A NE A NE A NEC Corporation Rev.2.0 July

24 5 Optical Drive Up to 1 Optical Drive (external) can be connected Category Product Name/Description Part Number External External DVD Dual Drive Slim DVD Dual drive, USB bus powered, not including writing software, Cable length: 60cm DVD read speed: 8x (DVD-ROM/-R/-RW/-R DL/+R/+RW/+R DL) CD read speed: 24x (CD-ROM/-R/-RW) Internal DVD Drive cannot be mounted. Cannot be connected to the USB port of SUV cable. N F 6 PCI Card Please refer to Available Slots of References section regarding PCI Slots; Available Slots and Installation Limitations. 6.1 PCI Hot Plug Kit This Kit is required for PCI Card hot plug (replace/add) for A2040e. Product Name/Description PCI Hot Plug Kit A1040e does not support PCI Hot Plug. Not supported for Windows environment. Part Number NE3415-H Network Interface Controller Category Product Name/Description Part Number 1GbE 10GbE 1000 BASE-T Adapter (2ch) Broadcom BCM5718 PCIe 2.0(x4) (Performance: PCIe 2.0(x1)) Low Profile PXE Boot by IPv6 not supported 1000 BASE-TAdapter (4ch) Broadcom BCM5719 PCIe 2.0(x4), Low Profile - Network cables with RJ-45 plug covers cannot be used. - PXE Boot by IPv6 not supported 10G BASE Adapter (SFP+/2ch) Intel Ethernet Converged Network Adapters X710 PCIe 3.0(x8) - When connecting to the optical fibre cable, NE (SFP+ Module (10G-SR)) needs to be ordered per one port (max. 2) - Connection with Twinax cable is available. Please refer to the Users guide for the validated cable NE M NE M NE NEC Corporation Rev.2.0 July

25 Module 10G BASE Adapter (QSFP+/4ch) Intel Ethernet Converged Network Adapters XL710 PCIe 3.0(x8), Low Profile Supported OS: RHEL7.4 and ESXi6.5u1 only - Not supported for 40Gb connection - When connecting to the optical fibre cable, NE (QSFP+ Module (10G-SR)) needs to be ordered (max. 1 per port). - Connection via Twinax cable is availalbe. Please refer to the technical guide for LAN boards for the verified cables. - Connection via optical fiber and Twinax cable is only supported for breakout cable. 10G BASE-T Adapter (2ch) Intel Ethernet Controller X550 PCIe 3.0(x4), Low Profile SFP+ Module (10G-SR) 1 x SFP+ Module for NE This item is not built-in configured at the delivery (shipped separtely) QSFP+ Module 1 x QSFP+ Module for NE This item is not built-in configured at the delivery (shipped separtely) NE NE NE NE Network Interface Controller not pre-installed and this server does not have LAN interface/port at the base module. Needs to order at least 1 card. PXE (Preboot execution Environment) boot is supported by BASE-T Adapter (2ch) (NE M) BASE-T Adapter (4ch) (NE M) - 10GBASE Adapter (SFP+/2ch) (NE ), - 10G BASE Adapter (QSFP+/4ch) (NE ) - 10GBASE-T Adapter (2ch) (NE WOL (Wake On LAN) is supported by 1000BASE-T Adapter (2ch) (NE M) only. When booting OS by PXE boot, please select IPv4 for network settings. For A2040e, Network Interface Controller supports Hot Plug. In order to enable Hot Plug, NE3415-H102 PCI Hot Plug Kit is required. NEC Corporation Rev.2.0 July

26 NIC Teaming feature NIC Teaming and bonding features NIC Teaming and bonding features are available with this server to provide network redundancy and load balancing for higher network reliability and optimized network loads. Windows Server and Linux environement, network redundancy is supported with Teaming/Bonding functions supported by OS. See the table below for supported network interfaces, operation mode and number of teams. Windows Teaming Network Interface Operation Mode Configuration Number of Teams NE M/-152M (1000BASE-T) NE (10GBASE-SR) Generic or static Teaming Dynamic teaming Switch-independent 4 ports in one card 4 ports among multiple cards 2 ports in one card 2 ports among multiple cards Up to 4 ports per one team Up to 16 teams per one system Up to 2 ports per one team Up to 8 teams per one system NE (10GBASE-T) 2 ports in one card 2 ports among multiple cards Up to 2 ports per one team Up to 8 teams per one system Teaming with one port shared among multiple teams: Not supported Network interface for teaming should be all the same. Teaming of the port using iscsi: Not supported Linux Bonding Network Interface Operation Mode Configuration Number of Bonding NE M/-152M (1000BASE-T) NE /-159 (10GBASE-SR) NE /-157L (10GBASE-T) Recommend: active-backup (fault-tolerance) 2 ports in one card 2 ports among multiple cards 2 ports in one card 2 ports among multiple cards 2 ports in one card 2 ports among multiple cards Up to 2 ports per one bonding Up to 16 teams Up to 2 ports per one bonding Up to 8 teams Up to 2 ports per one bonding Up to 8 teams Network interface for teaming should be all the same. Contatc to our sales representative for other than Active-backup Can mix 1000BASE bonding, 10GBASE-SR bonding and 10GBASE-T bonding within one system NEC Corporation Rev.2.0 July

27 Using iscsi (for data usage) Please refer to istorage web site regarding the connection to istorage Series via iscsi, and to EXPRESSCLUSTER web site for cluster configuration. See the table below for supported network interface and OS combinations. Network Interface 1GbE 10GbE (10GBASE-SR) NE M/- 152M/-152L NE /-158L NE Operating System Windows Server 2016/ VMware Windows Server 2016/ VMware VMWare 10GbE (10GBASE-T) NE /-157L Windows Server 2016 / VMware NIC Teaming/Bonding features are not supported on iscsi interfaces. Redundant paths for iscsi is supported by StoragePathSavior(SPS) NEC Corporation Rev.2.0 July

28 6.3 External Storage Controller External RAID Controller This is for the connection to Disk Expansion Unit. Category Product Name/Description Part Number Controller External RAID Controller (2GB, RAID 0/1/5/6) LSI MegaRAID SAS e RAID0/1/5/6/10/50/60, 2GB Cache, External 8 port (4x2 connector), PCIe 3.0(x8), SAS 12Gb/s, Low Profile Backup Unit Flash Backup Unit Flash Backup Unit (for NE3303-H004) 140mm Flash Backup Unit Cable attached NE3303-H004 NE3303-H102 This External RAID Controller [NE3303-H004] can connect to NEC s Disk Expansion Unit (2U [N ][N ] [N ][N ]). SAS Cable (2m) for [N ][N ]: [K (02)] SAS Cable (2m) for [N ][N ]: [K (02)] Disk Expansion Unit can be placed just above or just below the server. BTO configuration at the server delivery does NOT include RAID configuration. Please do RAID configuration by using utility setting. By using Flash Backup Unit, Write Back is available. To configure a large-capacity RAID array, it is recommended to configure in RAID 6 or RAID 60 for the failure with 2x HDDs in order to minimize the risk of becoming multiple hard drives failure during the RAID rebuilding process. It is recommended to set RAID array configuration drives less than 8 in order to minimize the risk of becoming multiple hard drives failure Fibre Channel / SAS Controller Categor y Product Name/Description Part Number Fibre Channel SAS Fibre Channel Controller (16G/1ch) Broadcom LightPulse LPe16000B-M6 Host Bus Adapter 16Gb/s, Optical, PCIe 3.0(x8), Low Profile Fibre Channel Controller (16G/2ch) Broadcom LightPulse LPe16002B-M6 Host Bus Adapter 16Gb/s, Optical, PCIe 3.0(x8), Low Profile SAS Controller LSI SAS9300-8e Host Bus Adapter 12Gb/s SAS, PCIe 2.0(x8), Low Profile This SAS Controller is supported only for the use with NEC Storage M-Series. NE A NE A NE Connection to istorage M Series via SAS under Linux environment: Not supported Under VMware environment, back-up devices directly connected to the system is not available. For backup under VMware environement, data back-up via network is recommended by configuring back-up server separately. Please refer to the istorage website for the supported device and OS by istorage series Please refer to the EXPRESSCLUSTER web site for cluster configuration Depending on the FibreChannel(FC) link speed, the available cable type and/or length may differ. Please refer to the users guide for the Fibre Channel Controller. For A2040e, Fibre Channel Controller supports Hot Plug. In order to enable Hot Plug, NE3415-H102 PCI NEC Corporation Rev.2.0 July

29 Hot Plug Kit is required. As 2m cables are used to connect SAS Controller and Device Expansion Unit, the following remarks should be noted when using Device Expansion Unit. - Device Expansion Unit (1U): N Can be mounted with the space with 0-2U with the server (on top or under). Device 1 (left side of the Unit in front view / connector 1 of right side from rear view) can be connected. When requiring to connect to Device 2 (right side of the Unit in front view / connector 2 of the left side from rear view), please consult with NEC through the sales representative for the details before ordering. As 2m cables are used to connect SAS Controller and LTO (rack-mount type), the following remarks should be noted when using the LTO (rack-mount type). LTO (1U): N /100 Cannot be mounted on top of the server (with 0U from the server) Can be mounted just below the server (with 0U from the server) If need to mount with 1-3U from the server (on top or under), the location of the SAS Controller should be adjusted. Please contact to NEC representative for more details. NEC Corporation Rev.2.0 July

30 7 Other Add-in Components 7.1 Power Supply Unit Required Number of Power Supply Unit See the table below for the required number of Power Supply Unit per voltage/configuration/redundancy. Voltage CPU PSU AC200V AC100V 8180M M No. of CPU Board Noredundancy No. of PSU N+1 2N 1600W /3/ W 1/ /4 3 4 Not Available 1600W /3/ W 1/ /4 3 4 Not Available 1600W /3/ W 1/ /4 3 4 Not Available 1600W /3/ W 1/2/ Not Available W M M /3/ W 1/2/ Not Available 1600W /3 3 4 Not Available 4 4 Not Not Available Available 1000W /3 3 4 Not Available 4 4 Not Not Available Available 1600W /3 3 4 Not Available 4 4 Not Not Available Available 1000W /3 3 4 Not Available 4 4 Not Not Available Available 1600W (*1) /3 3 4 Not Available 4 4 Not Not Available NEC Corporation Rev.2.0 July

31 Available 1000W /3 3 4 Not Available 4 (*2) 3 4 Not Available 4 4 Not Not Available Available 1600W (*1) /3 3 4 Not Available 4 (*2) 3 4 Not Available 4 4 Not Not Available Available 1000W 1/ /4 3 4 Not Available W (*1) /3/4 3 4 Not Available 1000W 1/ /4 3 4 Not Available *1 Under AC100V, some PSU configurations can be available with 1000W PSU only. Please select 1000W PSU for AC100V environment. (The above information for 1600W under AC100V is only for reference). *2: Only for A1040e. When selecting Power Supply Unit, recommend to consider potential add-on of the optional products in the future. Redundancy can be selectable; no-redundancy, N+1 and 2N: 1. N+1: When one Power Supply Unit fails, the operation can continue. 2. 2N: Configuring 2 power supply groups, each consisting of 1 or 2 power supply unit. When one group fails, the operation can continue with another group. In this case, power supply is redundant between PSU#1 and PSU#2, or PSU#3 and #4. Please configure power supply path appropriately. Hot-plug supported. Can replace Power Supply Unit without stopping the system (under redundant configuration securing enough power during replacement) Power Supply Unit AC Power Supply Unit Product Name/Description Power Supply Unit (1600W) Hot-plug, 80 PLUS Platinum certified Recommend to use 1000W PSU for AC100V environment Power Supply Unit (1000W) Hot-plug, 80 PLUS Platinum certified Part Number NE A NE A Power Supply Unit includes Cable Tie to prevent dropping AC cable. Cannot mix different Power Supply Unit Cannot mix 100V/200V in one server Please prepare AC cables compliant to the regulation in each geo. NEC Corporation Rev.2.0 July

32 7.2 Redundant Fan Kit Product Name/Description Redundant Fan 4 x System Fan Module + 2 x Auxiliary Cooling Fan Module Hot-plug supported Part Number (standard) 7.3 Redundant Management Board Product Name/Description Redundant Management Board Required to have 2nd management board for redundancy Not supported for A1040e This is to be shipped only at the delivery of the server (cannot be add-on later). Part Number NE3415-H Trusted Platform Module Kit Product Name/Description Trusted Platform Module Kit TPM 2.0 compliant Module needed to use Windows BitLocker Drive Encryption feature Supported OS: Windows Server 2016 Part Number NE3315-H102 This is to be shipped only at the delivery of the server (cannot be add-on later). When installed in the server, cannot be removed later. Need to enable TMP Support in BIOS Set-up Menu to use this item. Need to save recovery password for Windows BilLocker Drive Encription, as the password is necessary to recover the data when replacing the hardware in failure. 7.5 Internal Flash Memory Product Name/Description Part Number Internal Flash Memory With this kit, EXPRESSBUILDER can be started from POST. NE A When this flash memory is ordered and shipped with the server, the data in the EXPRESSBUILDER is copied into this kit. When this flash memory is ordered and shipped separately, the data must be copied from the EXPRESSBUILDER DVD to the flash memory after installing it in the server for use. NEC Corporation Rev.2.0 July

33 8 Add-on Components inch LCD Console Unit Category Product Name/Description Part Number Drawer w/ KVM Drawer w/o KVM Drawer Cable Drawer Keypad 17-inch LCD Console Drawer (8port) 17-inch LCD, US 83-keys Keyboard, Optical mouse, 8 port KVM switch, 1U height Switch Unit Connection Cable Set (USB, 1.8m) 1.8 m, 1 x 15-pin mini D-sub to 1 x 15-pin mini D-sub / 1 x 4- pin USB A Switch Unit Connection Cable Set (USB, 3m) 3 m, 1 x 15-pin mini D-sub to 1 x 15-pin mini D-sub / 1 x 4- pin USB A Switch Unit Connection Cable Set (USB, 5m) 5 m, 1 x 15-pin mini D-sub to 1 x 15-pin mini D-sub / 1 x 4- pin USB A 17-inch LCD Console Unit 1U 17-inch LCD, US 83-keys Keyboard, Optical mouse, 1U height, 4-pin USB B to 4-pin USB A cable 2 m, PS/2 Y- splitter cable 2m, 15-pin mini D-sub VGA cable 2 m, BLACK 17inch LCD Console Drawer (1port) 17-inch LCD, US 103-keys Keyboard with 10-key, Touch pad with 3-button, 1U height, 4-pin USB B to 4-pin USB A cable 1.8m, Two PS/2 cable 1.8 m, 15-pin mini D- sub VGA cable 1.8 m Keyboard Unit (JP) JP 108-keys Keyboard with 10-key for N F 17inch LCD Console Drawer (1port) Keyboard Unit (UK) UK 104-keys Keyboard with 10-key, for N F 17inch LCD Console Drawer (1port) N F K (1A) K (03) K (05) N F N F N N N F/106F does not have 10-key on keyboard. (N F has 10-key) Need Switch Unit Connection Cable for the number of servers (up to 8 server) There is one USB connector on the front side of the server. For the rear side, one VGA connector can be available by connectinig the cable to SUV cable connector. NEC Corporation Rev.2.0 July

34 8.2 KVM Switch Category Product Name/Description Part Number KVM Switch Cable Cascading Server Switch Unit (8Server) 1U USB 8 port KVM Switch, BLACK Switch Unit Connection Cable Set (USB,1.8m) 1.8 m, 1 x 15-pin mini D-sub - 1 x 15-pin mini D-sub / 1 x 4-pin USB A Switch Unit Connection Cable Set (USB,3m) 3 m, 1 x 15-pin mini D-sub - 1 x 15-pin mini D-sub / 1 x 4-pin USB A Switch Unit Connection Cable Set (USB,5m) 5 m, 1 x 15-pin mini D-sub - 1 x 15-pin mini D-sub / 1 x 4-pin USB A Switch Unit Connection Cable 1.8 m 1.8 m, 1 x 15-pin mini D-sub - 1x 15-pin mini D-Sub / 2x PS/2 N F K (1A) K (03) K (05) K (1A) Need Switch Unit Connection Cable for the number of servers (up to 8 server) There is one USB connector on the front side of the server. For the rear side, one VGA connector can be available by connectinig the cable to SUV cable connector. Please refer to the Rack Mount Configuration Guide for the details. 8.3 Server Management License The server integrates the Baseboard Management Controller to provide server management features. Refer to Server Management section of References for the details. Product Name/Description Remote KVM and Media License License for one server Remote KVM and remote media are enabled regardless of OS status Remote KVM: - Displays a graphics console on the web browser of the remote terminal (PC/Server). - Controls keyboard and mouse via the remote terminals web brower Remote media: - Enables the user to use the CD/DVD/FD/Flash memory of the remote terminals (PC/server) as if accessing the local drives. Remote KVM and remote media features are not available for virtual machines Part Number (standard) NEC Corporation Rev.2.0 July

35 8.4 Front Bezel Product Name/Description Front Bezel Part Number NE3446-H Cable Arm With this component at the rear side of the server, various cables are compactly combined. Product Name/Description Part Number Cable Arm To combine around 32 cables (except AC Power Cable, such as LAN, FC and USB) NE3343-H101 This makes server depth longer, as shown in the Dimensions. For calculation, LAN (UTP: without shield) is regarded as φ5mm in diameter at average; then 1x FC cable corresponds to 1x LAN cable, 1x SAS cable corresponds to 2x LAN cables, 1x SUV cable corresponds to 4x LAN cables and 1 x USB Cable corresponds to 1 x LAN cable. Table for quick reference: Model A2040e A1040e Max. cable capacity (by no. of LAN cable) Management LAN (mandatory required) SUV Cable *1 (by no. of LAN cable) Open cable capacity (by no. of LAN cable) x SUV Cable corresponds to 4 x LAN cable. NEC Corporation Rev.2.0 July

36 8.6 Management Console Specifications Need to prepare a PC for a management console meeting the following requirements: CPU Memory Network HDD More than Pentium4 1.3GHz Specifications More than 2GB (Memory for OS and browser + memory for Java + more than 1GB) 100BASE-TX equivalent and above (bandwidth more than 10Mbps) More than 40GB free space Resolution More than 1024 x 768 Supported browser Windows - Microsoft Internet Explorer 9.0, 10.0, Microsoft Edge * with IPv6 - Microsoft Internet Explorer 10.0, Microsoft Edge Linux - Firefox ESR 52.x Java Oracle Java JRE 8, 9 Client OS * For Windows terminal, 32bit version J2SE Runtime Environment for JRE 8, 64bit version for JRE 9. Windows - Windows Vista(SP2) - Windows 7 - Windows Windows 10 - Windows Server Windows Server 2008 R2 (SP1) - Windows Server Windows Server 2012 R2 - Windows Server 2016 * with IPv6 - Windows 7 - Windows Windows 10 - Windows Server Windows Server 2012 R2 - Windows Server 2016 Linux - Red Hat Enterprise Linux (version 6) - Red Hat Enterprise Linux (version 7) For A2040e, management console needs to be connected to Management LAN of both MGB#1 and MGB#2. For A1040e, management console needs to be connected to Management LAN of MGB#1 LAN environment/console PC is not pre-installed. Needs to prepare separately. Need to have a management console in addition to VGA console. Please prepare at least 1 console. Can be shared by multiple servers. NEC Corporation Rev.2.0 July

37 References CPU CPU: BTO Configuration Rule Memory CPUs are to be installed in the priority order of CPU1 => CPU2 => CPU3 => CPU4. 1.Memory in the Server: Priority/Order of Installation Priority/Order of installing Memory (DIMM) in the server is based on the following Basic Rures, with some differences depending on the server model or COPT mode or not. Basic Rules: When mixing different capacity of memory, larger capacity memory is installed first. Differenct capacity of DIMM cannot be mixed when using memory sparing or mirroring. Cannot use both memory sparing and memory mirroring. RDIMM and RDIMM-3DS cannot be mixed. 5 sets (10x DIMM) per CPU Board is not allowed to configure, in order to avoid performance decrease risk due to unbalanced memory. Different rules are applied between 6 or less DIMM per CPU configuration and 8 or more DIMM per CPU configuration 2.Memory in the Server: Priority/Order of Installation (Details) 2-1. Standard Memory Mode Installation in 1CPU Configuration Diagrams 2x DIMM 4x DIMM NEC Corporation Rev.2.0 July

38 6x DIMM 8x DIMM 12x DIMM Installation at 1/2/3/4CPU configuration Model A2040e (standard) A2040e COPT model with NE3300-SV801 A1040e DIMM Allocation Distributed Installation Rules 6 or less DIMM per CPU configuration 1CPUs with 6 or less DIMMs 2CPUs with 12 or less DIMMs 3CPUs with 18 or less DIMMs 4CPUs with 24 or less DIMMs CPU1 DIMM1&2 CPU2 DIMM1&2 CPU3 DIMM1&2 CPU4 DIMM1&2 CPU1 DIMM4&5 CPU2 DIMM4&5 CPU3 DIMM4&5 CPU4 DIMM4&5 CPU1 DIMM3&6 CPU2 DIMM3&6 CPU3 DIMM3&6 CPU4 DIMM3&6 8 or more DIMM per CPU configuration 1CPUs with 7 or more DIMMs 2CPUs with 13 or more DIMMs 3CPUs with 19 or more DIMMs 4CPUs with 25 or more DIMMs CPU1 DIMM1&2 CPU2 DIMM1&2 CPU3 DIMM1&2 CPU4 DIMM1&2 CPU1 DIMM4&5 CPU2 DIMM4&5 CPU3 DIMM4&5 CPU4 DIMM4&5 CPU1 DIMM7&8 CPU2 DIMM7&8(*1) CPU3 DIMM7&8(*1) CPU4 DIMM7&8(*1) CPU1 DIMM10&11 CPU2 DIMM10&11 CPU3 DIMM10&11 CPU4 DIMM10&11 CPU1 DIMM3&6 CPU2 DIMM3&6 CPU3 DIMM3&6 CPU4 DIMM3&6 NEC Corporation Rev.2.0 July

39 CPU1 DIMM9&12 CPU3 DIMM9&12 CPU2 DIMM9&12 CPU4 DIMM9&12 At 1/2/3CPU configuration, please skip blank CPU in the installation order. (*1) After 2CPU, when 6x DIMMs are installed per CPU, these DIMMs are to be installed to DIMM3&6 (not DIMM7&8). A2040e COPT 6 or less DIMM per CPU configuration 1CPUs with 6 or less DIMMs 2CPUs with 12 or less DIMMs 3CPUs with 18 or less DIMMs 4CPUs with 24 or less DIMMs CPU1 DIMM1&2 CPU1 DIMM4&5 CPU1 DIMM3&6 CPU2 DIMM1&2 CPU2 DIMM4&5 CPU2 DIMM3&6 CPU3 DIMM1&2 CPU3 DIMM4&5 CPU3 DIMM3&6 CPU4 DIMM1&2 CPU4 DIMM4&5 CPU4 DIMM3&6 8 or more DIMM per CPU configuration Decentraliz ed 1CPUs with 7 or more DIMMs 2CPUs with 13 or more DIMMs 3CPUs with 19 or more DIMMs 4CPUs with 25 or more DIMMs CPU1 DIMM1&2 CPU1 DIMM4&5 CPU1 DIMM7&8 CPU1 DIMM10&11 CPU1 DIMM3&6 CPU1 DIMM9&12 CPU2 DIMM1&2 CPU2 DIMM4&5 CPU2 DIMM7&8(*1) CPU2 DIMM10&11 CPU2 DIMM3&6 CPU2 DIMM9&12 CPU3 DIMM1&2 CPU3 DIMM4&5 CPU3 DIMM7&8(*1) CPU3 DIMM10&11 CPU3 DIMM3&6 CPU3 DIMM9&12 CPU4 DIMM1&2 CPU4 DIMM4&5 CPU4 DIMM7&8(*1) CPU4 DIMM10&11 CPU4 DIMM3&6 CPU4 DIMM9&12 At 1/2/3CPU configuration, please skip blank CPU in the installation order. (*1) After 2CPU, when 6x DIMMs are installed per CPU, these DIMMs are to be installed to DIMM3&6 (not DIMM7&8) Memory Rank Sparing Mode Installation in 1CPU Configuration Diagrams 4x DIMM NEC Corporation Rev.2.0 July

40 8x DIMM 12x DIMM Installation at 1/2/3/4CPU configuration Model A2040e (standard) A2040e COPT model with NE3300-SV801 A1040e A2040e COPT DIMM Allocation Distributed Decentraliz ed Installation Rules For 32GB MEM for Memory Rank Sparing (4x8GB) and 64GB MEM for Memory Rank Sparing (4x16GB), Sparing is only supported by 8x DIMM or 12 x DIMM configuration (Sparing with 4x DIMM is NOT supported.). CPU1 DIMM1&2&4&5 CPU2 DIMM1&2&4&4 CPU3 DIMM1&2&4&5 CPU4 DIMM1&2&4&5 CPU1 DIMM7&8&10&11 CPU2 DIMM7&8&10&11 CPU3 DIMM7&8&10&11 CPU4 DIMM7&8&10&11 CPU1 DIMM3&9&6&12 CPU2 DIMM3&9&6&12 CPU3 DIMM3&9&6&12 CPU4 DIMM3&9&6&12 At 1/2/3CPU configuration, please skip blank CPU in the installation order. For 32GB MEM for Memory Rank Sparing (4x8GB) and 64GB MEM for Memory Rank Sparing (4x16GB), Sparing is only supported by 8x DIMM or 12 x DIMM configuration (Sparing with 4x DIMM is NOT supported.). CPU1 DIMM1&2&4&5 CPU1 DIMM7&8&10&11 CPU1 DIMM3&9&6&12 CPU2 DIMM1&2&4&5 CPU2 DIMM7&8&10&11 CPU2 DIMM3&9&6&12 CPU3 DIMM1&2&4&5 CPU3 DIMM7&8&10&11 CPU3 DIMM3&9&6&12 CPU4 DIMM1&2&4&5 CPU4 DIMM7&8&10&11 CPU4 DIMM3&9&6&12 At 1/2/3CPU configuration, please skip blank CPU in the installation order Memory Mirroring Mode Installation in 1CPU Configuration Diagrams NEC Corporation Rev.2.0 July

41 3x DIMM 6x DIMM 12x DIMM Installation at 1/2/3/4CPU configuration Model A2040e (standard) A2040e COPT model with NE3300-SV801 A1040e DIMM Allocation Distributed Installation Rules 6 or less DIMM per CPU configuration 1CPUs with 6 or less DIMMs 2CPUs with 12 or less DIMMs 3CPUs with 18 or less DIMMs 4CPUs with 24 or less DIMMs CPU1 DIMM1&2&3 CPU2 DIMM1&2&3 CPU3 DIMM1&2&3 CPU4 DIMM1&2&3 CPU1 DIMM4&5&6 CPU2 DIMM4&5&6 CPU3 DIMM4&5&6 CPU4 DIMM4&5&6 8 or more DIMM per CPU configuration 1CPUs with 7 or more DIMMs 2CPUs with 13 or more DIMMs 3CPUs with 19 or more DIMMs 4CPUs with 25 or more DIMMs CPU1 DIMM1&2&3 CPU2 DIMM1&2&3 CPU3 DIMM1&2&3 CPU4 DIMM1&2&3 CPU1 DIMM4&5&6 CPU2 DIMM4&5&6 CPU3 DIMM4&5&6 CPU4 DIMM4&5&6 CPU1 DIMM7&8&9 CPU2 DIMM7&8&9 CPU3 DIMM7&8&9 CPU4 DIMM7&8&9 CPU1 DIMM10&11&12 CPU2 DIMM10&11&12 CPU3 DIMM10&11&12 CPU4 DIMM10&11&12 At 1/2/3CPU configuration, please skip blank CPU in the installation order. NEC Corporation Rev.2.0 July

42 A2040e COPT 6 or less DIMM per CPU configuration 1CPUs with 6 or less DIMMs 2CPUs with 12 or less DIMMs 3CPUs with 18 or less DIMMs 4CPUs with 24 or less DIMMs CPU1 DIMM1&2&3 CPU1 DIMM4&5&6 CPU2 DIMM1&2&3 CPU2 DIMM4&5&6 CPU3 DIMM1&2&3 CPU3 DIMM4&5&6 CPU4 DIMM1&2&3 CPU4 DIMM4&5&6 8 or more DIMM per CPU configuration Decentraliz ed 1CPUs with 7 or more DIMMs 2CPUs with 13 or more DIMMs 3CPUs with 19 or more DIMMs 4CPUs with 25 or more DIMMs CPU1 DIMM1&2&3 CPU1 DIMM4&5&6 CPU1 DIMM7&8&9 CPU1 DIMM10&11&12 CPU2 DIMM1&2&3 CPU2 DIMM4&5&6 CPU2 DIMM7&8&9 CPU2 DIMM10&11&12 CPU3 DIMM1&2&3 CPU3 DIMM4&5&6 CPU3 DIMM7&8&9 CPU3 DIMM10&11&12 CPU4 DIMM1&2&3 CPU4 DIMM4&5&6 CPU4 DIMM7&8&9 CPU4 DIMM10&11&12 At 1/2/3CPU configuration, please skip blank CPU in the installation order. NEC Corporation Rev.2.0 July

43 Internal Drive Internal Drive: Priority/Order of Installation At the initial server delivery, internal drives are installed with the following priority/order. If the ordered configuration is not in the scope of the rule, the drive will be delivered as not configured. Slot 0 => Slot 1 => Slot 2 => Slot 3 => Slot 4 => Slot 5 => Slot 6 => Slot 7 Conditions to Mix Internal Drives Mixing HDDs with the same rotation speed is supported in the BTO configuration. Mixing HDDs with different rotation speed and mixing HDD and SSD is NOT supported in the BTO configuration. Cannot mix the different drives within a RAID group (pack) When defining hot spare disk under mixed drive configuration, need to set Dedicated Hot Spare per RAID group. Global Hot Spare is not available. Please refer to the following for further details. With different internal drives For a RAID Controller, 2 kinds of HDDs or HDD/SSD can be mixed. - When SSDs with different capacity are mixed, smaller SSDs are installed first. - When HDDs with different rotation speed, higher speed HDDs are installed first. If the speed is the same, smaller capacity HDDs are installed first. NEC Corporation Rev.2.0 July

44 NEC Corporation Rev.2.0 July