Believe in innovation, enjoy the power. Station Guide
|
|
- Dustin Manning
- 5 years ago
- Views:
Transcription
1 Believe in innovation, enjoy the power Station Guide
2 global organization at your service JBC is a global company with a distributor network spanning continents that guarantees a solid commercial organization with quick and efficient service. The power of experience More than years of experience have placed JBC at the technological forefront of tools for soldering and rework operations in electronics. Innovation, efficiency and reliability are the key features of a wide range of products which have been designed to satisfy the most demanding requirements of professionals. High technology, superior quality Product perfection is one of the main objectives of JBC s improvement and development program. The R&D department has created the most innovative soldering technologies, which JBC is proud to present in this catalogue. High Technology for quality soldering The JBC Exclusive Heating System JBC s stations work with the JBC Exclusive Heating System which recovers tip erature extremely quickly. This increases work efficiency and allows the user to work with lower eratures. 0ºC 20ºC Enhanced Temperature Efficiency 0ºC in 2 seconds Difference in Thermal response: sec. 2 0 time Increase Productivity + Better Quality The Intelligent Heat Management The JBC equipment also incorporates the Sleep & Hibernation modes to help extend tip life by further reducing the erature when the tool is not in use. s a result, tip life increases by. The Sleep function automatically reduces tip erature when the tool is in the stand. When the set time for Sleep mode is up, the station automatically goes to Hibernation. The power supply is cut and the tip remains at room erature. Tip life increases exponentially by using lower eratures as shown. Using the Sleep mode the erature is further reduced, which extends tip life by. T work T sleep T amb x x x 2x x /2x 0 0 Tip life Work 0ºC Sleep Sleep & Hibernation Sleep from 0 to 0 min. (programmable) Tip life up to x longer 0ºC Set point Tool in the stand Hibernation 00ºC 0ºC 2sec. Work time ESD safe ll JBC products comply with CE standards and EDS recommendations. JBC Soldering SL. reserves the right to update, modify or delete any information without previous notice. 0ºC 20ºC 20ºC Efficient Temperature Control Comparative process of solder joints ºC avg.. 00ºC avg.. Time exceed, sec. 2 0 ºC difference of. drop time Cartridges with extended tip life The essential part of the soldering iron is the tip so JBC has over 00 models of cartridges of different sizes and shapes to choose from depending on each application. JBC has developed the most advanced technology based on the following principles: Excellent Heat Transfer The compact element reduces thermal barriers. Instantaneous Heating Up fully integrated thermal sensor in the heater ensures quick erature recovery. Great Durability The intelligent algorithm control program extends tip life. JBC nother top brand
3 Compact line Everything you need in the minimum footprint ll in One Control Unit + Stand + Cleaning Each unit meant for a specific purpose Soldering CD-B Soldering station For general electronic applications. Includes the T2- General Purpose Soldering Iron. CD-S Precision Soldering station For precision electronic applications. Includes the T20- Precision Soldering Iron. C Solder Feed station For intensive and/or single handed soldering jobs. Includes the P20- Solder Feed Iron. Quick tip changer Save time and increase productivity by using the quick cartridge changer. Simply insert the cartridge, remove it and introduce a new one without having to turn off the station. This allows you to work on different soldering jobs. Suit position JBC stations are designed to suit the user s work position. The tool stand and the cable collector are easily adjustable. Intelligent Heat Managament The stations incorporate the Sleep & Hibernation features that lower tip erature when the tool is placed on the adjustable stand. s a result, a JBC s tip life lasts up to times longer than other brands. T2- Rework T20- Process screen The User Friendly Menu allows you to personalize over 20 parameters to help manage the soldering process. Set erature limits, check usage counters, lock the station with a PIN or program Sleep & Hibernation features. Tip Cleaning System The CD stations feature a tip cleaner with a new antisplash rubber to prevent splashing of solder particles and maintain the work area clean. The most complete cleaning system allows you to choose from safe methods according to your needs: metallic wool, sponge or metal brush. The integrated wiper also allows you to remove excess solder from the tip single-handedly. Communication station-pc JBC wants to take you beyond the station by means of a USB-B connection to your computer. You can update station software, create graphs of the soldering process and manage or monitor parameters via your PC. CP Micro Tweezers station For soldering and desoldering small and medium SMD components. Includes the P20- Micro Tweezers. CV Micro Desoldering station with Pneumatic For desoldering jobs in precision electronic applications. Includes the DS0- Micro CS Micro Desoldering station with Electric For desoldering jobs in precision electronic applications. Includes the DS0- Micro
4 ø 0, ø 0, 0,7 0,, C0- C20 C0-0 C0-0 C0-0 C0-2 C0-07 C0-20 C0-2 C0-09 C0- C0-2 0,2 x 0, ø 0, C0-0 High Thermal Permformance C0-27 ø 0, ø 0, ø 0, x 0,2 0, x 0, 0, x 0,2 C0-0 C0- C0-7 C0-0 C0-2 C0- x 0,, x 0,, x 0,, x 0, 2, x 0, Ø Ø Ø C0-222 Ø Ø C0-2 C0-22 C0-2 C0- PP C20-00 Blade type º, ø 0, º C C º C20-00 º C0-0 C20-2 C20-27 C C20-27 C20-27 C20-27 C20-27 C20-20 =,0 mm C =,0 mm C0-02 C0-0 ø 0, º ø 0,2 ø 0, ø,9 C0-2 C0-22 C0-09 º ø 0, ø C0-0 ø C0-,2 x 0,7 º º C0-0 º º Pure nickel tip for HMP (High Melting Point) soldering C2 Ideal to reach joints ø 0,, x 0,7 SPECIL 2 C2-2 C2-09 C2- C2-0 R,,,2,2, 0, C2-7,, 2 [, 2, WLQQHG OHQJWK C2-0 C2-70 C2-772 C2-7 Through hole drag soldering, [ C2- C2-9,2 0,7,,2,2,2 2 [ C2- C2- ø 0, ø 0, C2-7 ø,7 C2-70 C2-7 C2-72 C2-0 C2-77 C2-7,x,,x0,,2x0,7 C2-22 C2-7 C2-*,2x0,7,2x, 2,2x 2,2x C2-7 C2-* C2-7 2,2 x,x, C2-77 C20 ø, C20-27 C20-20 C20-0,2 x, C0- C20-0 C20-2 C20-09 x, 2x 2x0,9 C20-02, x, C20-0 C20-0 C20-0 C20-0,x, x, x,2 x x,7 x, C20-2 Y 7,x,7 7,x, C20- C20-07,x Y 0x C70-09 C70-00 C20-0 C20- C20- C20- C20- C70 ø,7,9 x,7,x, ø, C0-9 C70-0 C70-0 C70-0 C70-00 C70-0 C70-07 C C C70-0 C70-00 C70-0 C70-0 C C70-0 C70-0 C70-09 C70-00 C70-0 C70-00 ø, C20-00 C20-0 C20-00 C20-00 C C20-00 C20-0 C20-00 C20-00 C C20-0 C20-02 To solder inside a connector 0, x 0,2 0,2 x 0, 0, x 0, 0, x 0,, x 0, [, x 0, 0,, 2, 0,7 0, C C20-00 ø, " 9 R 2 To solder through hole components on multilayer ø2 PBCs ø 0,7 $ SPECIL 2x 0 x 20 x 0 0 ø , C20-0 C TINNED C R 0, 0, C C0-0 0,9 2,2 x º, 7, C20-00 C20-00 C2-2 To solder inside a connector C20-2 C0-0 Rework blade =, mm max. C0-7 º C C º Through hole Tip with an soldering extra tinned surface º Fast soldering on contacts in male connectors C2-2 C20-2 C20-22 [, x 0, [ 2 ø, C2-0 C2-02 C2-0 C2- C2-2 C2- C2-2 SPECIL C20-2 C20-22 ø º PTFE coated tip = 22,0 mm = 20,0 mm =,0 mm = 0,0 mm =,0 mm =,0 mm =,0 mm ø7 º Ø, C20-00 Cable Stripper C20-2 = 0 mm C20-00 C20-00 Dual in Line C20-27 =, mm C = 2, mm º C20-0 C20-02 QFP & PLCC C20 º Cartridges with Cable big contact soldering surface to solder wide area, Ø C0-22 º ø Dual in Line Chips Components C0 C0-0, 0,7 C C20-00 C C20-00 C20 Cartridges with chrome finish, designed for use in plastics º Chips Components º Stainless steel tip, x 0, x 0, 7,(' C0-2 ø 0, ø 0, ø 0, See the full range on our website C0 Over 00 Cartridges & Customized models Cartridge Map 9,(: $ C20-09 C2 [ C , x 0, C2-7 C * C20-02,2 x 0, 0, x 0, C20-02 C20-022,2 x 0,7 [ C20-00, x 0, C [ C20-0 2, x 0, 2,2 x [ C20-02 C20-0 C20-07,2 x,2 x 2, x 0, [ C2-72 C2-77 C2-90 C2-0 C2-7 C2-9 C2-907 C2-07 C2-0* C2-* C2-07* C20-02 x 0,,2 x,2 2,7 x [, x C70-02 = 2,2 mm C2-09 = 20,0 mm C70-00 [ C70-0 ø,7, x, C70-0 C70-02 C70-02 C70-0 x, x, ø, C C70-02 C70-02 C70-02,,2,2 2 C2-79 C2-770 C2-7 C2-729 C2-0 C2-9 C2-77 C2-7 C2-7 C2-90 C2-70 C2-09 C2-* C2-0* C70-0,,9 C70-02,2, C70-0 C70-09 º ø,7 º º º º º ø, ø, ø ø ø, C2-00 C2-02 C2-0 C2-90 C2-00 C2-97 C2-97 C2-90 C2-0 C2-9 C2-9 C2-07 C2-20* C2-0* [ 2,2 x [,2 x, ø 0, ø 0, ø 0, ø 0, ø ø2 ø, ø 2, ø C70-07 C2-9 C2-* Hoof tip with reduced tinned surface, ideal for touch-up Cartridges to solder SMT IC, x, C2-9 C2-* [ º 7LQQHG C2-72 Chip Components C2-009 C2-0 Dual in Line C2-02 QFP & PLCC For PLCC Sockets Blade type 0, C2-09 C2-0 C2-07 C2-0 =, =, = 2,2 =,9 =,2 B = 29,0 = 9, B =,0 = 9, B =,0 = 9, B = 2,0 = 9, B = 0,0 = 7, B =,0 =, B =,0 =, B = 0,0 =, B =,0 =, B =,0 B C2-227 C2- C2-22 C2-22 C ,,,9 C2-27 N. of contact positions = = 7,0 B = 7,0 C High Thermal Efficiency Cartridges: These are characterised by their optimised tip geometries which achieve improved thermal efficiencies of up to 0%. C * These cartridges are 20mm longer than normal cartridges for easier access to difficult-to-reach joints C2-2 N. of contact positions = 2 =,9 B =, C0-002 = 7 = 2 = 2 = = 0 C2-99 C0-00 Ø = mm Ø =,2 mm Ø =, mm ØB = 0, mm ØB = 0, mm ØB = mm Ømax. pin = 0, mm Ømax. pin = 0, mm Ømax. pin = 0, mm C0-00 $ C0-07 Ø = 2 mm ØB =, mm Ømax. pin = mm C2-77 C2-99 C2-9 C2-72 C2-9 C70-00 C70-02 C C70-02 C70-0 C2-7 C70-00 C70-0 C70-0 C0-00 C0-007 C0-00 C0-0 C0-02 C0-0 C0-0 Ø =, mm ØB =,2 mm Ømax. pin = mm Ø =,9 mm ØB =, mm Ømax. pin =,2 mm Ø = mm ØB =, mm Ømax. pin =, mm Ø = mm ØB = 0, mm Ø =,2 mm ØB = 0, mm Ø =, mm ØB = mm Ø =, mm ØB =,2 mm C0-002 C0-0 C0-00 C0-00 Ø = 2,7 mm ØB = mm Ømax. pin = 0, mm Pad Cleaners Tips C0-0 C0-0HT Standard Life Ø =, mm ØB = 0, mm Bø, $ C70-07 C0-00 Ø =, mm ØB = 0, mm C0-002 Ø =, mm ØB = 0, mm C0-0 Ø = mm ØB = 0, mm Ømax. pin = 0, mm Ømax. pin = 0, mm Ømax. pin = 0, mm 0, B = 7, B = 7, = B =,0 = 2, B =,0 = 2,0 B = 2,0 =, B =, C70-00 Ø, 2, 7, 90 C70-0,, R,9 C70-0 C0-00 ø Bevel Edge Tips 0, C2-22 C2-2 B C2-0 C2-0 C2-0 C2-222 C2-0 C2-22 C2-20 C C2-07 C2-9 =, mm C2-9 = 2,7 mm C2-9 =,9 mm B /&& C2-00 C2-0 C2-029 C2-7 C2-2 C2-7 C2-929 C2-9 C2-90 C2-29 C2-20 C2-27 C2-2 C2-2* C2-0* ø 2 Tinned QFP C2-7, 90, C70-0 7, 7,9x,, Pad Cleaners Tips Bø C2-92 C2-2*, ø ø C2-7 C2-79 x, 20º 90 C70-00 C2-77 C2-70 C2-90 C2-0 C2-9 C2-7 C2-92 C2-0 C2-9 C2-7 C2-* C2-2* C2-2* Mini Spoon,2 x 0,7 C C2-9 C2-* 2,7x,9 7, R,x, º º C70-0 7x, 2 C70-0 R, ø 0, R ø 0, º C Ø,9 7, º C ø9 Cartridges with chrome finish, designed for use in plastic C2-9 C0-00 C0-00 C0-009 C0-00 Ø =,2 mm ØB =, mm C0-009 Ø = mm ØB =, mm Ømax. pin =, mm Ømax. pin =, mm C0-007 C0-0 C0-00 Ø =,2 mm ØB =,9 mm C0-007 Ø =, mm ØB = 2, mm C0-0 Ø =,2 mm ØB = mm Ømax. pin =,7 mm Ømax. pin = 2,2 mm Ømax. pin = 2, mm C0-00 C0-00 Ø =, mm ØB =, mm Ømax. pin =, mm C0-02 C0-02HT Standard Life Ø =, mm ØB = 0, mm C0-0 C0-0 Extended Life Ø = 2,7 mm ØB = mm C0 C0
5 Modular line Set up your personalized station according to your soldering or rework needs Control Units DI Tool DDE 2 Tools & Capacitive Keyboard DME Tools & Touch Screen Stackable modules save work space Fully compatible tools with all control units Easy-to-use menu helps work more efficiently MS / MV Desoldering Modules MSE / MVE Desoldering Modules PSE Tools Power Supply Unit Station customizable Personalize the parameters according to your work. Partial Counters Total and partial time register for each port: work, sleep & hibernation in hours. Peripherals Join station ports to pedals and modules: desoldering, nitrogen flow regulator,... Tools Preset The station detects the tool and applies the parameters chosen by the operator. Graphs Optimize soldering quality by analyzing your work graphics in real time. Stands D-SD P-SD P-SD HT-SD DS-SD DR-SD Communication Station-PC Update station software, manage your stations via PC or export graphics. Robots utomate the soldering process and manage the station via Robot. JBC Net Your Soldering Network Manage your whole soldering process remotely and in real time. Tools T20 Precision Purpose Handles T2 General Purpose Handles T70 Heavy Duty Handles P20 Solder Feed Iron P20 Micro Tweezers HT20 Thermal Tweezers DS0 Micro Desoldering Iron DR0 Desoldering Iron TFT screen See % power for each port Quick erature change USB- Software Updating & export graphics Tool in use Consult the comprehensive help for each parameter Cartridge range C20 C2 C20 C20 C20 C0 C0 Cleaning systems CL99 ESD CLMS utomatic Junior CLMB utomatic Senior CLMU utomatic Universal Display different ports in use
6 Premium line Ready-to-use with all the necessary equipment for a successful job Rework For soldering and desoldering all types of components quickly and safely. Work simultaneously with up to 2 different tools. Exclusive solutions Heavy Duty & Nano The answer to your rework needs DDSE Rework station with Electric DDVE Rework station with Pneumatic compressed air source is necessary at the operator s bench. Soldering DIT Soldering station For industrial soldering jobs with medium and high power requirements. Includes the T2- General Purpose Soldering Iron. L uto-feed Soldering station For intensive and/or single handed soldering jobs. DIR Precision Soldering station For industrial precision soldering jobs with medium power requirements. Includes the T20- Precision Soldering Iron. utomates the soldering process by feeding solder wire. You can select the length and the feed rate of the tin wire. T2- T20- Hot ir For soldering and desoldering all types of SMD using hot air with extractors or protectors. JTSE Hot ir station Includes the JT-T Heater Hose set. TESE Precision Hot ir station Includes the TE-TB Precision Heater Hose set. JTSE-Q & TESE-Q Hot ir stations without extractor desk extractor desk JT-T Control irflow & Temperature Build your own profiles TE-TB Desoldering For desoldering small and medium-sized insertion components and for cleaning circuits with SMD components. DIS Desoldering station with Electric Includes the DR0- DIV Desoldering station with Pneumatic Includes the DR0- compressed air source is necessary at the operator s bench. DSS Micro Desoldering station with Electric Includes the DS0- Micro DR0- The Complete Solution RMSE Complete Rework station with Electric PHSE-K IR Preheater Set For preheating multilayer PCBs by applying infrared. RMVE Complete Rework station with Pneumatic DS0-
7 High Power 20 watt peak power HDE Heavy Duty station This is the ideal solution for high thermal demand or prolonged soldering applications such as the production of solar panels, multi-layered circuits and components of large dissipation surfaces. This station works with the T70 Heavy Duty Handles and C70 Cartridges. Nano Technology The finest soldering cartridge in the world; only 0. mm NSE Nano Rework station Includes the NT0- Nano Purpose Soldering Iron and the NP0-B Steady Nano Tweezers. NNE Nano Soldering station Includes two NT0- Nano Soldering Irons. NT0- Total erature control with our new pedal option. NP0-B Used worldwide by: Siemens pple Rockwell Collins bq Flextronics Sanmina Huawei Boeing Continental Visteon Google Intel FoxConn Motorola Jabil Commscope Present in the following sectors: utomotive, Consumer electronics, Medical, Military, viation & many more... ESD safe 0070/7
ESD safe. A global organization at your service. The power of experience. High technology, superior quality
A global organization at your service JBC is a global company with a distributor network spanning 5 continents that guarantees a solid commercial organization with quick and efficient service. The power
More informationNew products Price List RECOMMENDED RETAIL PRICE IN EURO
New products Price List RECOMMENDED RETAIL PRICE IN EURO Compact stations Glass Screen CD-2BD 230V High performance soldering station T245-A Handpiece C245-903 and C245-741 Cartridges Use C245 Cartridge
More informationPRICE LIST 16.3 Recommended Retail Price in
PRIE LIST 16.3 Recommended Retail Price in page 4-5 D-S Precision Soldering station D- Soldering station F Solder Feed station P Micro Tweezers station S/V Desoldering stations ontrol Units page 18-19
More informationSPECIFICATION SHEETS REV:12 / APRIL 10
SPECIFICATION SHEETS REV:12 / APRIL 10 2 BT Soldering stations PAG.4 BD Soldering stations 5 CD-A Soldering stations 6 CF-A Soldering feed stations 7 CP-A Micro tweezer Station 8 CS/CV Desoldering stations
More informationCompact Line. Everything you need in the minimum footprint
Compact Line Everything you need in the minimum footprint COMPACT stations The best self-contained equipment for a successful hand soldering The most exceptional technology JBC has become the best choice
More informationPRICE LIST 17.1 Recommended Retail Price
PRIE LIST 17.1 Recommended Retail Price ompact line page 4-5 D-S Precision Soldering station D- Soldering station Solder Feed station P Micro Tweezers station S/V Desoldering stations Modular line ontrol
More informationJBC,THE POWER OF EXPERIENCE
JBC,THE POWER OF EXPERIENCE 75years of specialised experience have placed JBC in the technological forefront for soldering equipment and tools. Innovation, efficiency and reliability are the key features
More informationFour-Tool Control Unit
www.jbctools.com English Four-Tool Control Unit Ref. DME-A Packing List The following items should be included: Four-Tool Control Unit... 1 unit Ref. DME-1A (120V) DME-2A (230V) DME-9A (100V) Power Cord...
More informationEnglish Nano Rework station Ref. NASE-A
English Nano Rework station Ref. NASE-A Packing List Features The following items should be included: Control Unit... 1 unit Ref. NAE-1A (10V) NAE-A (30V) NAE-9A (100V) Nano Soldering Iron Handle... 1
More informationPrecision Soldering Station Ref. CD-SE
Precision Soldering Station Ref. CD-SE Packing List The following items should be included: Features CD Control Unit... 1 unit Ref. CD-1E (120V) CD-2E (230V) CD-9E (100V) Precision Purpose Handle... 1
More informationFour-Tool Control Unit
English Four-Tool Control Unit Ref. DME-A Packing List Connections The following items should be included: Work simultaneously with up to 4 tools and 1 module + 1 pedal for each tool (Peripherals). Four-Tool
More informationEnglish Heavy Duty station Ref. HDE-A
English Heavy Duty station Ref. HDE-A Packing List The following items should be included: HDE Control Unit...1 unit Ref. HDE-1A (120V) HDE-2A (230V) HDE-9A (100V) Stand... 1 unit Ref. HD-SD HD General
More informationEnglish Heavy Duty station Ref. HDE-A
English Heavy Duty station Ref. HDE-A Packing List The following items should be included: HDE Control Unit...1 unit Ref. HDE-1A (120V) HDE-2A (230V) HDE-9A (100V) Stand... 1 unit Ref. HD-SD General purpose
More informationPremium Precision Soldering station
www.jbctools.com English Premium Precision Soldering station Ref. DIR-D 2 www.jbctools.com Packing List The following items should be included: DI Control Unit... 1 unit Ref. DI-1D (120V) DI-2D (230V)
More information1 Tool Control Unit Ref. DI-D
www.jbctools.com 1 Tool Control Unit Ref. DI-D Packing List The following items should be included: DI Control Unit... 1 unit Ref. DI-1D (120V) DI-2D (230V) DI-9D (100V) Power Cord... 1 unit Ref. 0009417
More informationPremium 4 Tools Rework station with Electric Pump Ref. DMSE-A
Premium 4 Tools Rework station with Electric Pump Ref. DMSE-A Packing List The following items should be included: DR560 Accessories Ref. 0010211 DME Control Unit... 1 unit Electric Desoldering Tip Cleaner...1
More informationi-con soldering/desoldering stations
Ersa i-con innovative technology for efficient and comfortable hand soldering Ensuring quality in lead-free soldering is a huge challenge for hand soldering. Consequently the users have a wide range of
More informationPerfect for SMD Rework.
Perfect for SMD Rework. Introducing the new CV-500 Connection Validation Metcal is pleased to introduce the CV-500 Connection Validation, the companion station to the CV-5210 system. The CV-500 packs all
More informationin-built Vacuum Pick-up for large SMD ICs RS232 to USB interface for direct connection to PC
Hi-End Hi-features rich 3-in-1 SMT/PTH Rework System Model MFRS-500SUSB reliable & caring since 1976 in-built Vacuum Pick-up for large SMD ICs RS232 to USB interface for direct connection to PC LEAD RoHS
More informationReady-to-use package - all you need is mains input power
All inclusive package, no hassles for customer Developed from best of breed tools & accessories Covers SMD/PTH soldering & desoldering Ideal for service centers, Labs Ready-to-use package - all you need
More informationContent. Microprocessor-controlled soldering. Micro soldering pencil. WMRP soldering pencil for RT soldering tips 12 WD 1 / WD 1000 / WD 2 4
Content Microprocessor-controlled soldering Page Micro soldering pencil Page WD 1 / WD 1000 / WD 2 4 Technical data WD 1 6 Scope of supply WD 1 6 Scope of supply WD 1000 6 Accessories WD 1/ WD 1000 6 Technical
More informationEDSYN Quality. PHONE: FAX (Sales): FAX (Service): INTERNET:
When your name is on the line in today s electronics universe, precise performance and adaptability count. EDSYN is dedicated to manufacturing the world s finest quality products in accordance to the line
More informationDDE-B Robot station Ref. DDRE-B
DDE-B Robot station Ref. DDRE-B Packing List Features The following items should be included: USB-A connector 2.8 Color TFT screen 2 Tools Control Unit... 1 unit Ref. DDE-1B (120V) DDE-2B (230V) DDE-9B
More informationSelective Soldering. from InterSelect Germany. of Selective Soldering Machines. Perfect Service. German Quality.
The new Generation of Selective Soldering Machines Worldwide Network. Innovative Products. Perfect Service. German Quality. Selective Soldering from InterSelect Germany A wide range from a small stand-alone
More informationPLUTO ELIABLE SOLDERING & REWORK STATIONS. Since 2002 PLUTO
Since 2002 SOLDERING & REWORK STATIONS R PLU TO D 7 77 UGGED ELIABLE ADICAL We are a Leading and also pioneer in indigenously deeloped soldering and de soldering station and haing a more than decade of
More informationWeller WR Series Based
Integrated ESD Workstation cum SMD/PTH Rework MulfiFunction Package Allin, Complete ESD Workbench and essential tools/accessories for SMD/PTH Rework reliable & caring since 976 IEWRWPMST3MPK Integrated
More informationBGA IRDA-WELDER User Manual. Model: T870A
BGA IRDA-WELDER Model: T870A 0 CATALOGUE Features....2 Technical Parameter and Components..3 T-870A illustrated explaining...4 (1)The whole machine 4 (2)Front panel.. 5 (3)Rear panel.. 5 (4)Focus holder
More informationINSTRUCTION MANUAL Fume Extractor Ref. FAE2-5A
www.jbctools.com INSTRUCTION MANUAL Fume Extractor Ref. FAE2-5A INSTRUCTION MANUAL Packing List The following items should be included: Fume Extractor... 1 unit Ref. FAE2-5A RJ12 direct cable... 2 units
More informationESD WORK TABLE WITH DIGITAL REWORK STATION
ESD WORK TABLE WITH DIGITAL REWORK STATION (SMD Rework / PTH Rework) Package - 1 TIP Activator SMD Components Soldering PTH Desoldering QFP / PLCC / SOIC SOP Desoldering Fume Absorber DIGITAL REWORK STATION
More informationInt883 INSTRUCTION MANUAL. IR-Preheating System BASIC TROUBLESHOOTING GUIDE. 12 Contact the vendor.
BASIC TROUBLESHOOTING GUIDE PROBLEM 1: THE UNIT HAS NO POWER 1. Check if the unit is switched ON. 2. Check the fuse. Replace with the same type if fuse is blown. 3. Check the power cord and ensure there
More informationUPS PIco. for use with. Raspberry Pi B+, A+, B, and A. HAT Compliant. Raspberry Pi is a trademark of the Raspberry Pi Foundation
UPS PIco Uninterruptible Power Supply with Peripherals and I 2 C control Interface for use with Raspberry Pi B+, A+, B, and A HAT Compliant Raspberry Pi is a trademark of the Raspberry Pi Foundation Gold
More informationAVEN PRODUCTS FOR INSPECTION AND PRECISION ASSEMBLY. aveninc.com
Call 734.973.0099 to set up a free appointment PRODUCTS FOR INSPECTION AND PRECISION ASSEMBLY Microscopes Digital Scopes Video Inspection Systems Cameras Illumination Magnifying Lamps Hand Tools Soldering
More informationMFR-PS2200 MFR-H1-SC2 MFR-H2-ST2 MFR-H4-TW WS1 MFR-WSPT
MFR-2200 Series Dual Output Simultaneous Soldering & Rework Systems The MFR-2200 Series features dual output capability allowing users to select operation of one handpiece or two hand-pieces simultaneously.
More informationSoldering Iron Evaluation
The tests were done by an independent contract manufacturer for the purpose of evaluating for future purchases, what they have deemed to be the best soldering station, for their respective applications.
More informationBuilt from our customers best ideas.
Built from our customers best ideas. The new WX soldering stations from Weller. A new era in soldering. Two stations to launch in a new soldering era. The WX 1 single-channel soldering station The name
More informationMetcal MFR-1100 Series 60W Single Output Solder / Rework System
60W Single Output Solder / Rework System MFR-1100 Series Features and Benefits Many options enable you to create the system you need 60W output gives you the power you need while using lower and safer
More informationAccessories for control enclosures. BERNSTEIN attachment solutions. Double coupling head (console version with suspension system attachment)
25 Accessories for control enclosures BERNSTEIN attachment Single coupling head (suspended console version) Double coupling head (console version with suspension system attachment) 322.5 231 232 140 The
More informationONYX 32 MULTIFUNCTIONAL POSITIONING AND SOLDERING SYSTEM
ONYX MULTIFUNCTIONAL POSITIONING AND SOLDERING SYSTEM MACHINES.0 APPLICATION: SMT ZEVAC-LINE: ONYX The complete ONYX product line documentation is composed of the following data sheets: MACHINES.0 ACCESSORIES.0,.0
More informationCree LED Lamp Soldering & Handling
Cree LED Lamp Soldering & Handling This application note applies to the following products: P4 LEDs Surface-mount PLCC LEDs For XLamp LED soldering and handling information, refer to the XLamp Soldering
More informationAutomated Sl Selective Laser Assembly System
Automated Sl Selective Laser Assembly System Ray Prasad Ray Prasad Consultancy Group President, BeamWorks Inc (2000-2006) Spark 400 Note: BeamWorks Ltd, an Israeli Based Company filed for Liquidation in
More informationIdeal Resources Products Pvt. Ltd.
+91-8048720518 Ideal Resources Products Pvt. Ltd. https://www.idealresources.in/ We are leading Manufacturer, Supplier, Trader and exporter of Soldering Stations used in Electronics and Mechanical Industry.
More informationAdvanced Lantern 1.0 Kit. Introduction to the Advanced Lantern 1.0 Kit
Advanced LED Lantern 1.0 Instruction Manual Eastern Voltage Research, LLC Introduction to the Advanced Lantern 1.0 Kit Thank you for purchasing the Advanced Lantern 1.0 Kit. This kit is an advanced microprocessor
More informationAdvanced Strobe 1.0 Kit
Kit Instruction Manual Eastern Voltage Research, LLC December 2013, Rev 1 1 http://www.easternvoltageresearch.com Kit Introduction to the Kit Thank you for purchasing the Kit. If you are looking for a
More informationModule 7 Electronics Systems Packaging
Module 7 Electronics Systems Packaging Component Assembly, materials for assembly and joining methods in electronics -Surface Mount technology- design, fabrication and assembly; -failures library; -materials
More informationbrand new color. Innovation has a Introducing the new CV-5200 Connection Validation Soldering Station
Innovation has a brand new color. Introducing the new CV-5200 Connection Validation Soldering Station Metcal is raising the bar with a technology that will change hand soldering forever. Metcal soldering
More informationAdvanced BGA Rework Station. Suitable for all kind of reworks on different SMT components
Advanced BGA Rework Station Suitable for all kind of reworks on different SMT components Advanced BGA Rework Station New Key Features Compact and Stable Design Larger Board Holding Capacity One Touch Lock
More informationWD Soldering Solutions Excellence in Performance
WD Soldering Solutions Excellence in Performance High-Power-Technology for High-Precision Results Where energy efficiency meets sensitivity Never before have the challenges in the fast-paced field of microelectronics
More informationERSA i-tool The World s Most intelligent Professional Soldering Iron!
The Revolutionary ERSA i-con and i-tool: intelligent and Performing Power For the Ultimate innovation in Hand Soldering ERSA GmbH Soldering & Inspection Systems ERSA i-tool The World s Most intelligent
More information1. Table of contents History Tools Parts manipulation Soldering Soldering iron or station...
1. TABLE OF CONTENTS 1. Table of contents... 3 2. History... 15 3. Tools... 19 3.1. Parts manipulation... 19 4. Soldering... 23 4.1. Soldering iron or station... 23 4.2. Hot-air rework stations... 24 4.3.
More informationINSTRUCTION MANUAL Nano Rework station Ref. NASE-B
www.jbctools.com INSTRUCTION MANUAL Nano Rework station Ref. NASE-B Packing List The following items should be included: Control Unit... 1 unit Ref. NAE-1B (120V) NAE-2B (230V) NAE-9B (100V) Nano Handle...
More informationDigital Flame 1.0 Kit
Digital Flame 1.0 Kit Instruction Manual Eastern Voltage Research, LLC June 2012, Rev 1 1 http://www.easternvoltageresearch.com Introduction to the Digital Flame 1.0 Kit Thank you for purchasing the Digital
More informationCSI 720 Focused Infrared Welding System
CSI 720 Focused Infrared Welding System INSTRUCTION MANUAL Thank you for purchasing CSI 720 Focused Infrared Welding System. It is important to read the manual before using the equipment. Please keep manual
More informationLED Sequencer 1.0 / 1.5
LED Sequencer 1.0 / 1.5 Instruction Manual Eastern Voltage Research, LLC May 2012, Rev 2 1 http://www.easternvoltageresearch.com Introduction to the LED Sequencer 1.0 Thank you for purchasing the LED Sequencer
More informationBGA/QFP Rework Systems
BGA/QFP Rework Systems Technical Data ESD WHA 3000P WHA 3000V WQB 4000SOPS Dimensions (B x L x H) mm: 240 x 270 x 170 240 x 270 x 101 630 x 630 x 650 Dimensions (W x L x H) inch: 9,44 x 10,63 x 6,69 9,44
More informationEDSYN Quality. PHONE: FAX (Sales): FAX (Service): INTERNET:
Integrated design and a unique calibration feature allow the EDSYN MCS100 master control soldering and analytical system to save you time and money when you use, test, evaluate or calibrate soldering processes.
More informationWT Soldering and Rework High flexibility for versatile applications
WT Soldering and Rework High flexibility for versatile applications Table of Contents An unstoppable lineup...the WT. The best defense. Weller s new WT Line is an unbeatable contingent of compact, stackable
More informationUSB, MINI USB, MICRO USB FIREWIRE & MINI FIREWIRE UNIVERSAL SERIAL BUS &
INTRODUCTION: Adam Tech USB, Mini USB & Micro USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available
More informationInde MFRS500 Series Based
reliable & caring since 976 Integrated SMD/PTH MultiFunction ework Packages, SMDWPMF500PK... Allin package contains all essential tools & accessories for SMD/PTH ework SMDWPMF500PK... Integrated Packages
More informationIntegra Series: Model 508.5
Integra Series: Model 508.5 Selective Soldering System for High-Volume, High-Performance Soldering Features and Benefits Five-zone in-line operation with simultaneous fluxing, preheating and up to three
More informationReliability Study of Bottom Terminated Components
Reliability Study of Bottom Terminated Components Jennifer Nguyen, Hector Marin, David Geiger, Anwar Mohammed, and Murad Kurwa Flextronics International 847 Gibraltar Drive Milpitas, CA, USA Abstract Bottom
More informationDigital Candle 1.0 Kit
Kit Instruction Manual Eastern Voltage Research, LLC June 2012, Rev 1 1 http://www.easternvoltageresearch.com Introduction to the Kit Thank you for purchasing the Kit. This kit is definitely a favorite
More informationBGA IRDA-WELDER USER MANUAL MODEL: T-890
BGA IRDA WELDER T-890 USER MANUAL BGA IRDA-WELDER USER MANUAL MODEL: T-890 TAIAN PUHUI ELECTRIC TECHNOLOGY CO., LTD http://www.tech168.cn Features: 1. This machine has the strong and perfect function selection,
More informationUSB, MINI USB, MICRO USB FIREWIRE & MINI FIREWIRE UNIVERSAL SERIAL BUS &
INTRODUCTION: Adam Tech USB, Mini USB & Micro USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available
More informationPremium Soldering station Ref. DIT-D
www.jbctools.com Premium Soldering station Ref. DIT-D 2 Packing List www.jbctools.com The following items should be included: DI Control Unit...1 unit Ref. DI-1D (120V) DI-2D (230V) DI-9D (100V) Stand...1
More informationUSB, MINI USB, MICRO USB FIREWIRE & MINI FIREWIRE UNIVERSAL SERIAL BUS &
INTRODUCTION: Adam Tech USB, Mini USB & Micro USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available
More informationESTAÇÃO DE RETRABALHO NO BGA IBCT-870A
ESTAÇÃO DE RETRABALHO NO BGA IBCT-870A Features 1 Adopt infrared weld technology which independent exploration. 2 Use infrared heat, easy to cut through, heat proportion piercing tradition weld machine
More informationProduct Engineering Specification TVH SP0
Part : TVH020101SP0 Version : A1 Page : 1 / 9 SCOPE Product Engineering Specification TVH 0201 01 SP0 TVH 0201 01 SP0 is a TVS diode designed to protect one power/control line or one signal line from overvoltage
More informationMetcal MFR-1300 Series Dual Output 60W Desolder / Solder System w/internal Pump
ual Output 60W esolder / Solder System w/internal Pump MFR-1300 Series Features and enefits Self-contained internal pump and large capacity collection chamber makes desoldering easy Pistol handpiece can
More informationSMD Reflow Soldering Guide. Version 1.2
SMD Reflow Soldering Guide Version 1.2 Copyright Neoway Technology Co., Ltd 2017. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior
More informationManufacturing Notes for RF1602
Manufacturing Notes for RF1602 The information in this publication is believed to be accurate and reliable. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for
More informationMotocraft Multilayer Varistor
MLV1005 / 1608 SERIES ENGINEERING SPECIFICATION 1. SCOPE (1) Lead free type (2) SMD type zinc oxide based ceramic chip (3) Insulator over coat keeps excellent low and stable leakage current (4) Plating
More informationMetcal MX User Guide. Power. Precision. Performance. Soldering, Desoldering and Rework System _4
Metcal MX-5200 Soldering, Desoldering and Rework System User Guide Power. Precision. Performance. 7000-2500_4 Test Equipment Depot - 800.517.8431-99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com
More informationRC Tractor Guy Controller V2.1 Assembly Guide
RC Tractor Guy Controller V. Assembly Guide Features 0 Push button inputs Dual axis thumb sticks with built-in push button Rotary encoders with built-in push button MCU Socket to suit Meduino Mega 560
More informationASUS Zen Pad 10 Micro USB Port & Camera Replacement
ASUS Zen Pad 10 Micro USB Port & Camera Replacement Remove the motherboard and replace the camera and micro USB port. Written By: Mr Circuit ifixit CC BY-NC-SA www.ifixit.com Page 1 of 13 INTRODUCTION
More informationMetcal MFR-1300 Series Dual Output 60W Desolder / Solder System w/internal Pump
ual Output 60W esolder / Solder System w/internal Pump Test Equipment epot - 800.517.8431-99 Washington Street Melrose, M 02176 - TestEquipmentepot.com MFR-1300 Series Features and enefits Self-contained
More informationSega MegaDrive 1 RGB Bypass Installation Guide Rev 1.4
Sega MegaDrive 1 RGB Bypass Installation Guide Rev 1.4 Revision 1 Board See Page 3 for important information Revision 2 Board Onboard 2k2 Pull up Resistor for CSYNC This step by step guide describes the
More informationAOYUE INT 853A++ Pre Heating System INSTRUCTION MANUAL BASIC TROUBLESHOOTING
BASIC TROUBLESHOOTING PROBLEM 1: THE UNIT HAS NO POWER 1. Check if the unit is switched ON. 2. Check the fuse. Replace with the same type if fuse is blown. 3. Check the power cord and ensure there are
More informationNarrow pitch connectors (0.35mm pitch)
AXE7, 8 For board-to-fpc Narrow pitch connectors (0.35mm pitch) A35S Series FEATURES 1. Small size (Terminal pitch: 0.35 mm, width: 2.5 mm and Mated height: 0.8 mm) When mated, the footprint is reduced
More informationTKEY-1. CW touch key. (no electromechanical contacts) Assembly manual. Last update: June 20,
TKEY-1 CW touch key (no electromechanical contacts) Assembly manual Last update: June 20, 2017 ea3gcy@gmail.com Updates and news at: www.ea3gcy.com Thanks for constructing the TKEY-1A CW touch key Have
More informationPGA / BGA / PLCC SOCKETS
PGA / BGA / PLCC SOCKETS QUICK SELECTOR CHART PGA / BGA / PLCC PGA BGA PLCC GRID 2.54 mm INTERSTITIAL 1.27 mm 1.27 mm 1 mm SOCKETS Solder tail 156 161 165 SEE PAGE 173 Surface mount 156 161 165 166 169
More informationPost Tenebras Lab. Written By: Post Tenebras Lab
Post Tenebras Lab PTL-ino is an Arduino comptaible board, made entirely out of through-hole components. It is a perfect project to learn how to solder and start getting into the world of micro controllers.
More informationNew MX-5000 versus Original MX-500 Systems Comparison
New MX-5000 versus Original MX-500 Systems Comparison Overview The new MX-5000 Series is the next generation of the trusted Soldering and Rework Systems from Metcal. With double the power of its predecessor,
More informationGetting Started. 1.3 X-MWsystem Vocabulary. X-MWprobe X-MWanchor X-MWjumper. X-MWblock RF. X-MWblock Bias and Control. X-MWprotoplate X-MWwall X-MWlid
1. X-Microwave System (X-MWsystem) 1.1 Overview RF and Microwave design and product development is an incredibly interesting and challenging field. The Craft is truly an art and it takes years to learn
More informationModel XDL S Rev A
Delay Line DESCRIPTION The XDL15-3-030S can be used in amplifier linearization applications from 135 2700Mhz. Small form factor of XDL15-3-030S is ideal for cascading to obtain longer delay. The Xinger
More informationFor board-to-fpc. Narrow pitch connectors (0.35mm pitch)
For board-to-fpc AXT7, 8 Narrow pitch connectors (0.35mm pitch) F35S Series FEATURES 1. Space-saving (0.35 mm pitch) When mated, the footprint is reduced by approx. 12% from F4S series (40 pin contacts).
More informationREWORK TECHNIC PC.
Rework Technic pc MARTIN Expert 10.6 Rework for SMT Components REWORK TECHNIC PC www.martin-smt.de Rework Excellence Clear and functional the standard set by MARTIN. With the intuitive and precise functions
More informationUPS PIco. for use with. Raspberry Pi B+, A+, B, and A. HAT Compliant. Raspberry Pi is a trademark of the Raspberry Pi Foundation
UPS PIco Uninterruptible Power Supply with Peripheral and I 2 C control Interface for use with Raspberry Pi B+, A+, B, and A HAT Compliant Raspberry Pi is a trademark of the Raspberry Pi Foundation PiModules
More informationBottom: KW Top: 1,5-4.5 KW. Micro Drop Jet maintenance free Suitable for all alloys
IS B 335S Selective Soldering System from InterSelect All our machines are designed to meet the needs of lean manufacturing in combination with flexibility and through put at minimal cost. The new generation
More informationINPAQ. Specification TEA10402V15A0. Product Name. ESD Guard TM TEA Series (Thin Film Air Gap) Size EIA Global RF/Component Solutions
TEA10402V15A0 Specification Product Name Series Part No ESD Guard TM TEA Series (Thin Film Air Gap) TEA10402V15A0 Size EIA 0402 TEA10402V15A0 Engineering Specification 1. Scope TEA series is designed to
More informationJOVY SYSTEMS. isolder-40. User Manual. Rev. 1.00
JOVY SYSTEMS isolder-40 User Manual Rev. 1.00 1 Thank you for purchasing Jovy systems isolder-40 soldering station. Please read this manual before operating the isolder-40. Keep the manual in accessible
More informationQUASAR ELECTRONICS KIT No Hi-Fi PREAMPLIFIER WITH REMOTE CONTROL
QUASAR ELECTRONICS KIT No. 1070 Hi-Fi PREAMPLIFIER WITH REMOTE CONTROL General Description This is a hi-fi STEREO preamplifier based on a single integrated circuit which employs a revolutionary new method
More informationAPPLICATION SPECIFICATION TITLE PAGE REVISION
1 of 10 E 1 OBJECTIVE...2 2 SCOPE...2 3 GENERAL...2 4 DRAWINGS AND APPLICABLE DOCUMENTS...2 5 APPLICATION REQUIREMENTS...2 5.1 PCB layout... 2 5.2 Keep-out zone... 2 5.3 Packaging... 2 5.4 Multiple connector
More informationE-tec Socketing solutions for BGA, LGA, CGA, CSP, MLF & Gullwing chips
E-tec Socketing solutions for BGA, LGA, CGA, CSP, MLF & Gullwing chips Available contact styles: Elastomer interposers (10 Ghz & more) Probe pin sockets (generally below 5 Ghz) Other interposer styles
More informationThe Winning Force MS SERIES MECHANICAL SHEAR. Hi-Speed Accurate Efficient Performance
The Winning Force MS SERIES MECHANICAL SHEAR Hi-Speed Accurate Efficient Performance 1 The Winning Force As a total supplier for sheet metal manufacturing with almost 60 years of experience, Durma understands
More informationSocket Mounting Recommendations and Reflow Profile
Purpose This document is meant to serve as a guide for mounting E-tec surface mount device (SMD) sockets to the printed circuit board (PCB). The recommendations described here are guidelines only, and
More information07. har-link INTERFACE CONNECTORS
. INTERFACE CONNECTORS The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism
More informationNarrow pitch connectors (0.4mm pitch)
AXK7L, 8L For board-to-fpc Narrow pitch connectors (0.4mm pitch) F4 Series 5.0mm 4.1mm 3. Improved mating strength between the socket and header The simple locking structures provided for the soldering
More informationNarrow pitch connectors (0.4mm pitch)
For board-to-board For board-to-fpc AXK7, 8 Narrow pitch connectors (0.4mm pitch) P4 Series Without soldering terminals 5.1mm 5.1mm 3.96mm With soldering terminals 3.96mm Compliance with RoHS Directive
More informationUSB, MINI USB, MICRO USB FIREwIRE & MINI FIREwIRE UNIVeRSAl SeRIAl BUS & Ieee 1394 FIRewIRe USB & FwC SeRIeS
introduction: Adam Tech USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available in a variety
More informationBartels Micropumps. DE Seite 14
EN DE Seite 14 Bartels Micropumps Micropumps transporting the tiniest amounts of gases or liquids can be considered the heart of microfluidics. In many sectors they have become indispensable. Dosing lubricants,
More information