Clock Audio Retail May 2017 RETAIL PRICE LIST. Description. ARM 100N-RF N Motorised, retractable through-table omni-directional condenser microphone.

Transcription

1 Unit 10 Alphen Square North Cnr 16TH & George road, Randjespark, Midrand 1685 P.O. Box 32059, Kyalami, 1684 Tel: Website: BOUNDARY LAYER MICROPHONES Model Finish RETAIL PRICE LIST Description MOTORISED RETRACTA SERIES (Through-Table) Integral PPA, open-ended termination for audio, RJ 45 for motor. ARM 100-RF B Motorised, retractable through-table omni-directional condenser microphone. ARM 100N-RF N Motorised, retractable through-table omni-directional condenser microphone. ARMF 100-RF B Flush mount, motorised retractable through-table omni-directional condenser microphone. ARMF 100N-RF N Flush mount, motorised retractable through-table omni-directional condenser microphone. ARM 102-RF B Motorised, retractable through-table cardioid condenser microphone. ARM 102N-RF N Motorised, retractable through-table cardioid condenser microphone. ARMF 102-RF B Flush mount, motorised retractable through-table cardioid condenser microphone. ARMF 102N-RF N Flush mount, motorised retractable through-table cardioid condenser microphone. ARM 202-RF B Moterised, duel element retractable through-table cardioid condenser microphone. R 18, R 21, ARM 202N-RF N Moterised, duel element retractable through-table cardioid condenser microphone. R 18, R 21, ARM-C N/A Motor control unit for up to 4 x ARM microphones. R 10, R 12, ARM PSU-1 N/A External 12V DC 2A power supply for ARM-C controller. R 1, R 1, ARM PSU-4 N/A External 12V DC 5A power supply for up to 4 x ARM-C controller. R 1, R 1, RETRACTA SERIES (Through-Table) Integral PPA, open-ended termination for audio, RJ 45 for switch (S). CRM 100-RF B Retractable through-table omni-directional condenser microphone. CRM 100N-RF N Retractable through-table omni-directional condenser microphone. CRMF 100-RF B Flush mount retractable through-table omni-directional condenser microphone. CRMF 100N-RF N Flush mount retractable through-table omni-directional condenser microphone. CRM 102-RF B Retractable through-table cardioid condenser microphone. CRM 102N-RF N Retractable through-table cardioid condenser microphone. CRMF 102-RF B Flush mount retractable through-table cardioid condenser microphone. CRMF 102N-RF N Flush mount retractable through-table cardioid condenser microphone. CRM 202-RF B Dual element retractable through-table cardioid condenser microphone. R 9, R 11, CRM 202N-RF N Dual element retractable through-table cardioid condenser microphone. R 9, R 11, CRM 202S-RF B CRM 202-RF with bi-colour halo ring and touch switch for remote switching from DSP. R 11, R 12, CRM 202SN-RF N CRM 202SN-RF with bi-colour halo ring and touch switch for remote switching from DSP. R 11, R 12, CRM 200S-RF B Retractable through-table omni-directional condenser microphone with bi-colour halo ring and touch switch. R 11, R 13, CRM 200NS-RF N Retractable through-table omni-directional condenser microphone with bi-colour halo ring and touch switch. R 11, R 13, CRM 203-RF B Tri-element retractable through-table cardioid condenser microphone. R 12, R 14, CRM 203N-RF N Tri-element retractable through-table cardioid condenser microphone. R 12, R 14, CRM 203S-RF B CRM 203-RF with bi-colour halo ring and touch switch for remote switching from DSP R 14, R 16, CRM 203SN-RF N CRM 203N-RF with bi-colour halo ring and touch switchvfor remote switching from DSP R 14, R 16, CS SERIES (Table Top) Integral PPA, open-ended termination for audio, RJ 45 for switch (S). CS 1-RF B Single element table top condenser microphone with half-cardioid polar pattern. R 6, R 7, CS 1N-RF N Single element table top condenser microphone with half-cardioid polar pattern. R 6, R 7, CS 1S-RF B CS 1-RF with bi-colour halo ring and touch switch for remote switching from DSP. R 8, R 9, CS 1SN-RF N CS 1-RF with bi-colour halo ring and touch switch for remote switching from DSP. R 8, R 9, CS 2-RF B Dual element table top condenser microphone with half-cardioid polar pattern. R 8, R 9, CS 2N-RF N Dual element table top condenser microphone with half-cardioid polar pattern. R 8, R 9, CS 2S-RF B CS 2-RF with bi-colour halo ring and touch switch for remote switching from DSP. R 9, R 11, CS 2SN-RF N CS 2N-RF with bi-colour halo ring and touch switch for remote switching from DSP. R 9, R 11, CS 3-RF B Tri-element table top condenser microphone with half-cardioid polar pattern. R 11, R 13, CS 3N-RF N Tri-element table top condenser microphone with half-cardioid polar pattern. R 11, R 13, CS 3S-RF B CS 3-RF with bi-colour halo ring and touch switch for remote switching from DSP. CS 3SN-RF N CS 3N-RF with bi-colour halo ring and touch switch for remote switching from DSP. CS 4-RF B Quad-element table top condenser microphone with half-cardioid polar pattern. CS 4N-RF B Quad-element table top condenser microphone with half-cardioid polar pattern. CS 4S-RF B CS 4-RF with bi-colour halo ring and touch switch for remote switching from DSP. R 15, R 17, CS 4SN-RF N CS 4N-RF with bi-colour halo ring and touch switch for remote switching from DSP. R 15, R 17, BUTTON STYLE (Through-Table) Integral PPA, terminated with Male 3 Pin XLR. C 003E-RF B Button style through-table omni-directional condenser microphone. C 003EW-RF W Button style through-table omni-directional condenser microphone. C 004E-RF B Button style through-table cardioid condenser microphone. C 004EW-RF W Button style through-table cardioid condenser microphone. C 011E-RF B Button style through-table omni-directional condenser microphone - robust brass housing. C 011EN-RF N Button style through-table omni-directional condenser microphone - robust brass housing. C 012E-RF B Button style through-table cardioid condenser microphone - robust brass housing. C 012EN-RF N Button style through-table cardioid condenser microphone - robust brass housing. TABLE TOP, SURFACE MOUNT C 002E-RF B Low profile table top, surface mount omni-directional condenser microphone. 3M cable terminated with Tini Q / 3 Pin XLR PPA-RF. C 002EG-RF G Low profile table top, surface mount omni-directional condenser microphone. 3M cable terminated with Tini Q / 3 Pin XLR PPA-RF. C 005 B Surface mount omni-directional condenser microphone housed in ABS box with integral PPA, CPPW 01 (screw terminal connections) R 2, R 2, C 006E B Mini table top half-cardioid condenser microphone. 3M cable terminated with Tina Q / 3 Pin XLR, PPA-RF. C 006EG G Mini table top half-cardioid condenser microphone. 3M cable terminated with Tina Q / 3 Pin XLR, PPA-RF. C 006-JP B Mini table top half-cardioid condenser microphone. 3M cable terminated with 3.5mm mono jack plug. R R 1, C 008E-RF B Table top cardioid condenser microphone. Integral PPA, 3M cable terminated with male 3 Pin XLR. R 4, R 5, C 008EG-RF G Table top cardioid condenser microphone. Integral PPA, 3M cable terminated with male 3 Pin XLR. R 4, R 5, C 009E-RF B Large table top, surface mount omni-directional condenser plate microphone. 3M cable terminated with Tini Q / 3 Pin XLR, PPA-RF. R 6, R 6, C 009EG-RF G Large table top, surface mount omni-directional condenser plate microphone. 3M cable terminated with Tini Q / 3 Pin XLR, PPA-RF. R 6, R 6, C 015E-RF B Table top base with built in omni-directional condenser microphone and programmable switch. 5 Pin XLR for remote switch abilty. R 4, R 4, C 016E-RF B Table top base with built in omni-directional condenser microphone and programmable switch. 5 Pin XLR for remote switch abilty. R 4, R 4, C 30H B Low profile, through-table, surface mount omni-directional condenser microphone, open ended. R 2, R 2, TOUCH SWITCHES CH 32 S Dual colour halo ring with touch sensitive switch - side illumination (smoked effect finish). Terminated with RJ 45. CH 32W W Dual colour halo ring with touch sensitive switch - side illumination (smoked effect finish). Terminated with RJ 45. TS 001 C Flush mount touch sensitive switch with bi-colour LED halo. Terminated with RJ 45. TS 00W W Flush mount touch sensitive switch with bi-colour LED halo. Terminated with RJ 45. S 80S LATCH B Through-table microphone mount with bi-colour LED and latching switch. Terminated with RJ 45. R 2, R S 80S PTT B Through-table microphone mount with bi-colour LED and latching switch. Terminated with RJ 45. R 2, R Page 1 of 6

2 LB 001 NEW B Digital mute switching box.suitable for use with touch switch models: CH32, TS001. LB 001-PS B Digital mute switching box with 12V DC regulated power adaptor. R 4, R 4, DANTE TRANSPORTER CDT-100-UDP N/A 4 x way audio and control transporter via DANTE. Crestron/AMX logic control users only R 30, R 35, CDT-100-ConMon N/A 4 x way audio and control transporter via DANTE. Symetrix Logic control users only R 30, R 35, CDT-PSU-6 N/A External 12V DC 5A power supply for up to 6 x CDT-100's R 1, R 1, CEILING MICROPHONES RETRACTA SERIES (Motorised) CCRM 4000-M-C303 (Master Unit) NEW B Motorised, ceiling retractable Tri-element condenser microphone array. Inc. IR remote control, ceiling sensor and PSU. R 50, R 57, CCRM 4000-M-C303W (Master Unit) GW Motorised, ceiling retractable Tri-element condenser microphone array. Inc. IR remote control, ceiling sensor and PSU. R 50, R 57, CCRM 4000-SL-C303 (Slave) NEW B As CCRM 4000-M-C303 but without IR remote control, ceiling sensor and PSU. R 44, R 51, CCRM 4000-SL-C303W (Slave) GW As CCRM 4000-M-C303W but without IR remote control, ceiling sensor and PSU. R 44, R 51, CCRM 4000-M (Master Unit) NEW B Motorised, ceiling retractable cardioid condenser microphone. Inc. IR remote control, ceiling sensor and PSU. R 34, R 39, CCRM 4000W-M (Master Unit) W Motorised, ceiling retractable cardioid condenser microphone. Inc. IR remote control, ceiling sensor and PSU. R 34, R 39, CCRM 4000-SL (Slave) NEW B As CCRM 4000-M but without IR remote control, ceiling sensor and PSU. R 30, R 35, CCRM 4000W-SL (Slave) W As CCRM 4000W-M but without IR remote control, ceiling sensor and PSU. R 30, R 35, Accessories CCRM 4000-R N/A Remote control for CCRM 4000M. R 1, R 2, CCRM 4000-IR N/A Infrared sensor for CCRM 4000M. R 1, R 1, PSU-018 N/A 18V DC, 2 Amp switch mode power supply, will power up to 4 x CCRM R 1, R 2, CEILING MICROPHONE ARRAY C 303-RF NEW GW Tri-element ceiling microphone array. R 9, R 11, C 303W-RF GW Tri-element ceiling microphone array. R 9, R 11, SUSPENDED / FIXED (With Ceiling Plate) Price includes W 2, W 8 windshield. C 3100-RF-CP B Ceiling plate mounted slim line cardioid condenser gooseneck microphone, inc. CPPW 01-RF C 3100W-RF-CP W Ceiling plate mounted slim line cardioid condenser gooseneck microphone, inc. CPPW 01-RF C 3S-RF-CP B Suspended, plate mounted cardioid condenser microphone with knuckle joint & flexible shaft. inc. CPPW 01-RF. C 3SW-RF-CP W Suspended, plate mounted cardioid condenser microphone with knuckle joint & flexible shaft, inc. CPPW 01-RF. C 8S-RF-CP B Suspended, plate mounted hypercardioid condenser microphone with knuckle joint & flexible shaft, inc. CPPW 01-RF. R 6, R 6, C 8SW-RF-CP W Suspended, plate mounted hypercardioid condenser microphone with knuckle joint & flexible shaft, inc. CPPW 01-RF. R 6, R 6, SUSPENDED Price includes W 2, W 8 windshield. C 3S B Suspended, cardioid condenser microphone with knuckle joint and flexible shaft, open ended. R 1, R 2, C 3SW W Suspended, cardioid condenser microphone with knuckle joint and flexible shaft, open ended. R 1, R 2, C 3S-RF B Suspended, cardioid condenser microphone with knuckle joint and flexible shaft, inc. CPPW 01-RF. C 3SW-RF W Suspended, cardioid condenser microphone with knuckle joint and flexible shaft, inc. CPPW 01-RF. C 3SE-RF B Suspended, cardioid condenser microphone with knuckle joint and flexible shaft, inc. PPA-RF. C 3SEW-RF W Suspended, cardioid condenser microphone with knuckle joint and flexible shaft, inc. PPA-RF. C 8S B Suspended, hypercardioid condenser microphone with knuckle joint and flexible shaft, open ended. R 3, R C 8SW W Suspended, hypercardioid condenser microphone with knuckle joint and flexible shaft, open ended. R 3, R C 8S-RF B Suspended, hypercardioid condenser microphone with knuckle joint and flexible shaft, inc. CPPW 01-RF. C 8SW-RF W Suspended, hypercardioid condenser microphone with knuckle joint and flexible shaft, inc. CPPW 01-RF. C 8SE-RF B Suspended, hypercardioid condenser microphone with knuckle joint and flexible shaft, inc. PPA-RF. C 8SEW-RF W Suspended, hypercardioid condenser microphone with knuckle joint and flexible shaft, inc. PPA-RF. Accessories CP 73 B Ceiling plate for all models of C 3S & C 8S (excluding 'C P' models - plate already included). R R CP 73W W Ceiling plate for all models of C 3S & C 8S (excluding 'C P' models - plate already included). R R CP 73 10mm B As CP 73 but without cable gland - 10mm hole. R R CEILING MOUNT (Boundary Layer) SEC 07 NEW W Ceiling mount Omni-Directional condenser microphone with integral line level pre amp in ABS housing. R 1, R C 007 B Ceiling mount omni-directional condenser microphone, open ended. R 1, R 1, C 007W W Ceiling mount omni-directional condenser microphone, open ended. R 1, R 1, C 007N N Ceiling mount omni-directional condenser microphone, open ended. R 1, R 1, C 007-WR B Water resistant ceiling, wall mount omni-directional condenser microphone, open ended. C 007W-WR W Water resistant ceiling, wall mount omni-directional condenser microphone, open ended. C 007-JP B Ceiling mount omni-directional condenser microphone, 3.5mm mono jack plug connector. R 1, R 1, C 007W-JP W Ceiling mount omni-directional condenser microphone, 3.5mm mono jack plug connector. R 1, R 1, C 007E B Ceiling, wall mount omni-directional condenser microphone, inc. PPA. C 007EW W Ceiling, wall mount omni-directional condenser microphone, inc. PPA. C 007 CPPW 01 B Ceiling mount omni-directional condenser microphone, inc. CPPW 01 PPA in ABS box. C 007W CPPW 01 W Ceiling mount omni-directional condenser microphone, inc. CPPW 01 PPA in ABS box. C 007LL B Ceiling mount omni-directional condenser microphone, inc. CAP 002 line level pre-amp in ABS box. R 3, R 3, C 007WLL W Ceiling mount omni-directional condenser microphone, inc. CAP 002 line level pre-amp in ABS box. R 3, R 3, C 007-RF B Ceiling mount omni-directional condenser microphone, inc. CPPW 01-RF PPA in ABS box. C 007W-RF W Ceiling mount omni-directional condenser microphone, inc. CPPW 01-RF PPA in ABS box. C 007N-RF N Ceiling mount omni-directional condenser microphone, inc. CPPW 01-RF PPA in ABS box. R 3, R 4, C 007E-RF B Ceiling mount omni-directional condenser microphone, inc. PPA-RF. R 3, R 4, C 007EW-RF W Ceiling mount omni-directional condenser microphone, inc. PPA-RF. R 3, R 4, C 007EN-RF N Ceiling mount omni-directional condenser microphone, inc. PPA-RF. R 3, R 4, C 007E-RF-LED B Ceiling mount omni-directional condenser microphone with bi-clour LED, inc. PPA-RF. R 4, R 4, C 007EW-RF-LED W Ceiling mount omni-directional condenser microphone with bi-clour LED, inc. PPA-RF. R 4, R 4, C 007EN-RF-LED N Ceiling mount omni-directional condenser microphone with bi-clour LED, inc. PPA-RF. R 4, R 4, GOOSENECK MICROPHONES Model Finish Length (mm) Shaft Style Termination C SERIES - Cardioid, Condenser Prices includes W 2 windshield C 31 B 100 Fully Flexible Open Ended (M10 Stud) R 1, R C 31W W 100 Fully Flexible Open Ended (M10 Stud) R 1, R C 31E-RF B 180 Fully Flexible XLR-PPA R 2, R C 31EW-RF W 180 Fully Flexible XLR-PPA R 2, R C 31ES-RF B 180 Fully Flexible XLR-PPA (on/off switch) R 3, R C 32 B 200 Fully Flexible Open Ended (M10 Stud) R 1, R C 32W W 200 Fully Flexible Open Ended (M10 Stud) R 1, R C 32/SR B 200 Semi-Rigid Open Ended (M10 Stud) R 1, R C 32W/SR W 200 Semi-Rigid Open Ended (M10 Stud) R 1, R C 32E-RF B 280 Fully Flexible XLR-PPA R 2, R C 32E/SR-RF B 280 Semi-Rigid XLR-PPA R 2, R C 32EW-RF W 280 Fully Flexible XLR-PPA R 2, R C 32ES-RF B 280 Fully Flexible XLR-PPA (on/off switch) R 3, R C 32ES/SR-RF B 280 Semi-Rigid XLR-PPA (on/off switch) R 3, R C 33 B 300 Fully Flexible Open Ended (M10 Stud) R 1, R Page 2 of 6

3 C 33W W 300 Fully Flexible Open Ended (M10 Stud) R 1, R C 33/SR B 300 Semi-Rigid Open Ended (M10 Stud) R 1, R C 33W/SR W 300 Semi-Rigid Open Ended (M10 Stud) R 1, R C 33E-RF B 380 Fully Flexible XLR-PPA R 3, R C 33EW-RF W 380 Fully Flexible XLR-PPA R 3, R C 33E/SR-RF B 380 Semi-Rigid XLR-PPA R 3, R C 33EW/SR-RF W 380 Semi-Rigid XLR-PPA R 3, R C 33ES-RF B 380 Fully Flexible XLR-PPA (on/off switch) R 3, R C 33ES/SR-RF B 380 Semi-Rigid XLR-PPA (on/off switch) R 3, R C 34 B 400 Fully Flexible Open Ended (M10 Stud) R 1, R C 34W W 400 Fully Flexible Open Ended (M10 Stud) R 1, R C 34/SR B 400 Semi-Rigid Open Ended (M10 Stud) R 1, R C 34W/SR W 400 Semi-Rigid Open Ended (M10 Stud) R 1, R C 34E-RF B 480 Fully Flexible XLR-PPA C 34EW-RF W 480 Fully Flexible XLR-PPA C 34E/SR-RF B 480 Semi-Rigid XLR-PPA C 34EW/SR-RF W 480 Semi-Rigid XLR-PPA C 34ES-RF B 480 Fully Flexible XLR-PPA (on/off switch) R 3, R 3, C 34ES/SR-RF B 480 Semi-Rigid XLR-PPA (on/off switch) R 3, R 3, C 35 B 500 Fully Flexible Open Ended (M10 Stud) C 35/SR B 500 Semi-Rigid Open Ended (M10 Stud) C 35E-RF B 580 Fully Flexible XLR-PPA C 35E/SR-RF B 580 Semi-Rigid XLR-PPA C 35ES-RF B 580 Fully Flexible XLR-PPA (on/off switch) R R 4, C 35ES/SR-RF B 580 Semi-Rigid XLR-PPA (on/off switch) R R 4, C 36 B 600 Fully Flexible Open Ended (M10 Stud) R 2, R C 36/SR B 600 Semi-Rigid Open Ended (M10 Stud) R 2, R C 36E-RF B 680 Fully Flexible XLR-PPA R 3, R 4, C 36E/SR-RF B 680 Semi-Rigid XLR-PPA R 3, R 4, C 36ES-RF B 680 Fully Flexible XLR-PPA (on/off switch) R 3, R C 36ES/SR-RF B 680 Semi-Rigid XLR-PPA (on/off switch) R 3, R GOOSENECK MICROPHONES Model Finish Length (mm) Shaft Style Termination C SERIES - Cardioid, Condenser Prices includes W 2 windshield C 301 B 80 Knuckle Joint XLR-PPA R 2, R 2, C 301N N 80 Knuckle Joint XLR-PPA R 2, R 2, C 301W W 80 Knuckle Joint XLR-PPA R 2, R 2, C 301E-RF B 180 Knuckle Joint XLR-PPA C 301EN-RF N 180 Knuckle Joint XLR-PPA C 301EW-RF W 180 Knuckle Joint XLR-PPA C 301ES-RF B 180 Knuckle Joint XLR-PPA (on/off switch) R 3, R 4, C 901E-RF (C 900 capsule) B 195 Knuckle Joint XLR-PPA R 3, R 4, C 901ES-RF (C 900 capsule) B 195 Knuckle Joint XLR-PPA (on/off switch) R 4, R 5, SLIMLINE 6mm shaft. For use with SM 20-RF, SM 80-RF, S 140-RF, CW 9004 C 3100 B 125 Fully Flexible Tini Q R 2, R C 3100W W 125 Fully Flexible Tini Q R 2, R C 3100-CP B 100 Fully Flexible Open Ended (M6 Stud for ceiling plate) R 2, R C 3100W-CP W 100 Fully Flexible Open Ended (M6 Stud for ceiling plate) R 2, R C 310-R B 100 Rigid Shaft Tini Q R 2, R 2, C 310W-R W 100 Rigid Shaft Tini Q R 2, R 2, C 312-SR B 200 Semi-Rigid Tini Q R 2, R C 313-SR B 300 Semi-Rigid Tini Q R 2, R 2, C 314-SR B 400 Semi-Rigid Tini Q R 2, R 2, GN 3100 (Gooseneck adaptor) B 100 Fully Flexible Tini Q - Tini Q R 1, R 1, HALO - RED Other Halo LED colours available - Blue, Green POA C 31 Halo B 100 Fully Flexible Open Ended (M10 Stud) R 2, R 2, C 31E Halo-RF B 200 Fully Flexible 5 pin XLR-PPA C 32 Halo B 200 Fully Flexible Open Ended (M10 Stud) R 2, R 2, C 32E Halo-RF B 300 Fully Flexible 5 pin XLR-PPA R 3, R 4, C 32E/SR Halo-RF B 300 Semi-Rigid 5 pin XLR-PPA R 3, R 4, C 33 Halo B 300 Fully Flexible Open Ended (M10 Stud) R 2, R C 33/SR Halo B 300 Semi-Rigid Open Ended (M10 Stud) R 2, R C 33E Halo-RF B 400 Fully Flexible 5 pin XLR-PPA R 3, R C 33E/SR Halo-RF B 400 Semi-Rigid 5 pin XLR-PPA R 3, R C 34 Halo B 400 Fully Flexible Open Ended (M10 Stud) R 2, R C 34/SR Halo B 500 Semi-Rigid Open Ended (M10 Stud) R 2, R C 34E Halo-RF B 500 Fully Flexible 5 pin XLR-PPA R 3, R 4, C 34E/SR Halo-RF B 500 Semi-Rigid 5 pin XLR-PPA R 3, R 4, C 35 Halo B 500 Fully Flexible Open Ended (M10 Stud) R 2, R 2, C 35/SR Halo B 500 Semi-Rigid Open Ended (M10 Stud) R 2, R 2, C 35E Halo-RF B 600 Fully Flexible 5 pin XLR-PPA R 3, R 4, C 35E/SR Halo-RF B 600 Semi-Rigid 5 pin XLR-PPA R 3, R 4, C 36 Halo B 600 Fully Flexible Open Ended (M10 Stud) R 2, R 2, C 36/SR Halo B 600 Fully Flexible Open Ended (M10 Stud) R 2, R 2, C 36E Halo-RF B 700 Semi-Rigid 5 pin XLR-PPA R 3, R 4, C 36E/SR Halo-RF B 700 Semi-Rigid 5 pin XLR-PPA R 3, R 4, C 301 Halo B 199 Knuckle Joint Open Ended (M10 Stud) C 301E Halo B 199 Knuckle Joint 5 pin XLR-PPA R 3, R 4, TWIN MOUNT Cardioid condenser microphones mounted on twin rigid shafts, vertically adjustable. Prices include W 2 windshield C 420E B 309 Rigid Shaft 5 Pin XLR-PPA R 6, R 7, C 430E (Microphone capsules not included) B 275 Flexible Top Tini Q - 5 Pin XLR-PPA R 6, R 7, C 440E B 440 Rigid Shaft XLR-PPA R 6, R 6, MINI SHOTGUN (Hypercardioid) Price includes W8, W 8S windshield C 800 B 375 Semi-Rigid Open Ended (M10 Stud) R 3, R C 800E-RF B 458 Semi-Rigid XLR-PPA R 4, R C 800EW-RF W 458 Semi-Rigid XLR-PPA R 4, R C 800ES-RF B 458 Semi-Rigid XLR-PPA (on/off Switch) R 5, R 5, C 801 B 180 Knuckle Joint Open Ended (M10 Stud) R 3, R C 801W W 180 Knuckle Joint Open Ended (M10 Stud) R 3, R Page 3 of 6

4 C 801E-RF B 262 Knuckle Joint XLR-PPA R 4, R C 801EW-RF W 262 Knuckle Joint XLR-PPA R 4, R C 801ES-RF B 262 Knuckle Joint XLR-PPA (on/off Switch) R 5, R 5, C 815E-RF B Semi-Rigid XLR-PPA R 5, R 5, C 816E-RF B 440 Fully Flexible XLR-PPA R 5, R 6, DYNAMIC GOOSENECKS - Cardioid D 33 B 300 Fully Flexible Open Ended (M10 Stud) R 2, R D 33/SR B 300 Semi-Rigid Open Ended (M10 Stud) R 2, R D 33E B 350 Fully Flexible M/XLR R 2, R 2, D 34 B 425 Fully Flexible Open Ended (M10 Stud) R 2, R 2, D 34/SR B 425 Semi-Rigid Open Ended (M10 Stud) R 2, R 2, D 34E B 475 Fully Flexible M/XLR R 2, R 3, D 43 B 300 Fully Flexible Open Ended (M10 Stud) D 43E B 350 Fully Flexible M/XLR R 2, R 2, D 44 B 400 Fully Flexible Open Ended (M10 Stud) R 1, R 2, D 44E B 450 Fully Flexible M/XLR R 2, R 2, D 5 - Stub Microphone (Specification as D3) B 55 N/A M/XLR R 1, R 1, PAGING Cardioid, dynamic desk mounted paging microphone. PTT (press to talk) or latching switch options. DMB 1/D 43-PTT B 300 Fully Flexible N/A R 3, R DMB 2/D 43-PTT B 300 Fully Flexible N/A R 3, R 4, COMBINATION SERIES (Modular) Interchangeable microphone heads, shafts and bases - Prices include W 3,W 2 windshields. CA 900-RF B 1200 Rigid Shaft Tini Q connector to XLR termination. R 4, R 4, CA 700-RF B 700 Rigid Shaft Tini Q connector to XLR termination. R 4, R 4, CA 40 -RF B 400 Semi-Rigid Tini Q connector to XLR termination. R 3, R CA 30-RF B 300 Semi-Rigid Tini Q connector to XLR termination. R 2, R 3, SM 155 B Shock mount base for CA 900 & CA 700 shafts. R 2, R CAK 1-RF B Phantom power adaptor (14.6mm) with knuckle joint, Tini Q connector to XLR termination. S 750 B Mini table base with knuckle joint, Tini Q. Cable terminated with female Tini Q - PPA required (not included) C 3H B Cardioid condenser microphone capsule for CA Series, S 750, C 430E. R 2, R 2, C 900 B Cardioid condenser microphone capsule for CA Series, S 750, C 430E. (windshield not included). R 3, R 3, C 800H B Mini shotgun condenser microphone capsule for CA Series, S 750, C430E. SHOCK MOUNTS, STANDS & ADAPTORS NON-RF & C2 SERIES GOOSENECK MODELS AVAILABLE TO SPECIAL ORDER - POA THROUGH-TABLE SM 10 B Low profile through-table shock mount - 3 pin female XLR input and 3 pin male XLR output. R 1, R 1, SM 10X5 B As above with 5 pin XLR input & output. R 1, R 1, SM 20-RF B Low profile through-table shock mount, Tini Q connector,integral PPA-RF. Terminated with 3 pin male XLR. R 3, R 3, SM 70 B Low profile, through-table rubber shock mount. R R SM 75 B Shock mount base for above & below surface. Inc. 3/8" BSW adaptor, 10mm screw fittings. Terminated with 3 Pin female XLR. R 1, R 2, SM 75X5 B Shock mount base for above & below surface. Inc. 3/8" BSW adaptor, 10mm screw fittings. Terminated with 5 Pin female XLR. R 2, R 2, SM 75 10mm B Shock mount base for above & below surface. Inc. 3/8" BSW adaptor, 10mm screw fittings, open-ended. R 1, R 2, SM 80 B Through-table shock mount with flip cover, 3 pin female XLR. SM 80N N Through-table shock mount with flip cover, 3 pin female XLR. SM 80 X5 B Through-table shock mount with flip cover, 5 pin female XLR. SM 80NX5 N Through-table shock mount with flip cover, 5 pin female XLR. SM 80-RF B Through-table shock mount with flip cover, Tini Q connector, PPA-RF, terminated with 3 Pin male XLR. R 4, R 5, SM 80N-RF N Through-table shock mount with flip cover, Tini Q connector, PPA-RF, terminated with 3 Pin male XLR. R 4, R 5, SM 80S LATCH B Through-table shock mount with flip cover, 3 pin female XLR. LED - Latching switch. SM 80SN LATCH N Through-table shock mount with flip cover, 3 pin female XLR. LED - Latching switch. SM 80S PTT B Through-table shock mount with flip cover, 3 pin female XLR. LED - PTT switch. SM 80SN PTT N Through-table shock mount with flip cover, 3 pin female XLR. LED - PPT switch. SM 80SX5 LATCH B Through-table shock mount with flip cover, 5 pin female XLR. LED - Latching switch. SM 80SNX5 LATCH N Through-table shock mount with flip cover, 5 pin female XLR. LED - Latching switch. SM 80SX5 PTT B Through-table shock mount with flip cover, 5 pin female XLR. LED - PTT switch. SM 80SNX5 PTT N Through-table shock mount with flip cover, 5 pin female XLR. LED - PTT switch. SM 80S-RF LATCH B Through-table shock mount with flip cover, Tini Q connector, PPA-RF, terminated with 3 Pin male XLR, LED - Latching switch. SM 80SN-RF LATCH N Through-table shock mount with flip cover, Tini Q connector, PPA-RF, terminated with 3 Pin male XLR, LED - Latching switch. SM 80S-RF PTT B Through-table shock mount with flip cover, Tini Q connector, PPA-RF, terminated with 3 Pin male XLR, LED - PTT switch. SM 80SN-RF PTT N Through-table shock mount with flip cover, Tini Q connector, PPA-RF, terminated with 3 Pin male XLR, LED - PTT switch. SM 93 B Surface fitting microphone shock mount, with 3 pin female XLR. Screw terminals. R R SM 95 B Surface fitting microphone shock mount, with 5 pin female XLR. Screw terminals. R R TABLE TOP MICROPHONE BASES S 120 B Table top base fitted with M 10 screw thread mounting hole. R 1, R 2, S 120S LATCH B Table top base fitted with M 10 screw thread mounting hole. Latching switch. S 120S PTT B Table top base fitted with M 10 screw thread mounting hole. PTT switch. S 120X B Table top base fitted with 3 pin female XLR. R 2, R 2, S 120XS LATCH B Table top base fitted with 3 pin female XLR. Latching switch. R 2, R S 120XS PTT B Table top base fitted with 3 pin female XLR. PTT switch. R 2, R S 120X-2 B Table top base fitted with 3 Pin female XLR, pre-wired with 2M cable terminated 3 pin male XLR. R 2, R 2, S 120XS-2 LATCH B Table top base fitted with 3 Pin female XLR, pre-wired 2M cable terminated 3 pin male XLR - Latching switch. R 2, R 2, S 120XS-2 PTT B Table top base fitted with 3 Pin female XLR, pre-wired 2M cable terminated 3 pin male XLR - PTT switch. R 2, R 2, S 120X5 B Table top base fitted with 5 Pin female XLR. R 2, R 2, S 120XS5 LATCH B Table top base fitted with 5 Pin female XLR. Latching switch. S 120XS5 PTT B Table top base fitted with 5 Pin female XLR. PTT switch. S 120X5-2 B Table top base fitted with 5 Pin female XLR, pre-wired with 2M cable terminated 5 pin male XLR. R 3, R 3, S 120XS5-2 LATCH B Table top base fitted with 5 Pin female XLR, pre-wired with 2M cable terminated 5 pin male XLR. Lataching switch. S 120XS5-2 PTT B Table top base fitted with 5 Pin female XLR, pre-wired with 2M cable terminated 5 pin male XLR. PTT switch. S 133-RF B Table top base with programmable switch, LED. 3 pin female XLR input and 3 pin male XLR output. S 135-RF B Table top base with programmable switch, LED. 3 pin female XLR input and 5 pin male XLR output. (Logic control) S 140-RF B Table top base with programmable switch, LED. 3 pin TiniQ female XLR input & 5 pin male XLR output. (Logic control) S 155-RF B Table top base with programmable switch, LED. 5 pin female XLR input and 5 pin male XLR output. R 3, R 3, S 157-RF B Table top base with programmable switch, LED. 5 pin female XLR input and 7 pin male XLR output. (Logic control) SM 110 B Shock absorbing table stand with SA 3 microphone clip.. R 1, R 1, FLOOR STANDS F 237 B Aluminium ' fish pole ' with three piece adjustable tube and carrying case. S 210 B Floor / Boom microphone stand. R 1, R 1, S 210X B Floor stand with XLR connector, for use with CW 9006 wireless transmitter R 3, R 4, STAND ADAPTORS SA 3 B Microphone clip with 5/8" thread adaptor for C 600 Series. Page 4 of 6

5 SA 5 B Microphone clip with 5/8" thread adaptor for D500 Series, D 525E, 550E & C 650E. SA 8 B Microphone clip for C 850E shotgun. Stand adaptor with camera shoe 5/8" thread. PHANTOM POWER UNITS, PRE-AMPS & ADAPTORS CPPW 01 B Universal PPA, 9-48V in ABS flame-retardant box. Terminal screw connections. R 1, R 1, CPPW 01-RF B Universal PPA 9-48V in aluminium housing. Terminal screw connections. CPPW 01-RF-CV B As CPPW 01-RF but adapted for use with ceiling plate mounted microphones. PPA B Phantom power adaptor 9-48V with bass cut filter and -10dB pad. M/Tini Q - XLR. R 1, R 2, PPA-RF B Phantom Power Adaptor 9-48V. M/Tini Q - XLR. PPM B Belt pack - phantom power supply, 1.5V battery or 9-48V. M/Tini Q - M/XLR. R 1, R 2, PP-2 B Two channel phantom power supply v AC. R 3, R CAP 002 B Line level pre-amplifier in ABS flame-retardant box. Terminal screw connections. R 1, R 2, AUTOMATIC MIXERS AM 81 N/A 8 Channel micro processor controlled automatic microphone mixer. 1U, includes rack mount brackets & linking cable. R 19, R 22, MR 88 N/A 8 Channel DSP micro processor controlled automatic microphone mixer. 1U with rack mount brackets. R 33, R 38, LC N/A Linking cable for MR 88. RJ45 connectors. R R HANDHELD MICROPHONES DYNAMIC D 500 B Dynamic cardioid handheld microphone with SA 5 microphone clip & case. D 700S B Dynamic cardioid handheld microphone with on-off switch & microphone clip. R 2, R 2, D 525E (Electronic News Gathering) B Dynamic, super cardioid handheld microphone with SA 5 microphone clip windshield and case. R 2, R 2, D 550E (Electronic News Gathering) B Dynamic, omnidirectional handheld microphone with SA 5 microphone clip windshield and case. R 2, R 2, CONDENSER C 600 B Slimline cardioid condenser microphone with SA 3 microphone clip and case. R 3, R 4, C 650E B Handheld, cardioid condenser microphone, with SA 5 microphone clip and case. R 4, R C 850E (Rycote compatible) B Shotgun, supercardioid microphone, with SA 8 microphone clip, W 85 windshield & case. R 7, R 8, HEAD & NECK WORN MICROPHONES HEAD WORN CMH 2000 B Lightweight, headworn omni-directional condenser microphone. Terminated 4 Pin Tini Q, inc. CC 101 soft case. R 6, R 7, CMH 2000B BG Lightweight, headworn omni-directional condenser microphone. Terminated 4 Pin Tini Q, inc. CC 101 soft case. R 6, R 7, HW 1500 B Robust, headworn bi-directional condenser microphone. Terminated 4 Pin Tini Q, inc. W2 windshield & CC 101 soft case R 3, R 4, HW 1200 B Cardioid condenser headworn microphone. Terminated 4 Pin Tini Q, inc. windshield & CC 101. R 1, R 2, CTH 100 (PPA required) B Electret condenser throat microphone open ended (IP 67 rated) R 3, R 4, Accessories CC 101 B Soft protective case for CMH 2000(B), HW 1500 & HW 1200 head worn microphones. R R LAVALIER MICROPHONES CL 4 B Sub-Miniature, omni-directional condenser lavalier microphone, terminated with 4 Pin Tini Q, inc. clothing clip & windshield. R R 1, CL 4B BG Sub-Miniature, omni-directional condenser lavalier microphone, terminated with 4 Pin Tini Q, inc. clothing clip & windshield. R R 1, Accessories CL 4CC B Clothing clip for CL 4. R R CL 4CCB BG Clothing clip for CL 4. CL 6 B Lavalier, cardioid condenser microphone terminated with 4 Pin Tini Q, inc. clothing clip & windshield. R 1, R 1, WINDSHIELDS W 1 B Windshield for CL 2. R R W 2 B Windshield for C2 & C3 series and HW 1500 head worn microphones. R R W 3 B Windshield for D3 series, D5, C 900 & C 600 microphones. R R W 8 B Windshield or C 800 series microphones. R R W 8S B Windshield for C 815 & C 816 microphones. R R W 12 B Windshield for HW 1200 head worn microphone. R R W 85 B Windshield for C 850E shotgun microphone. R R UHF PROFESSIONAL WIRELESS SYSTEMS 200 SERIES Frequency band widths available for operation: , , , MHz. CW 200 B Table top system with 2 x cardioid condenser boundary layer microphone wireless transmitters & dual channel receiver. R 19, R 22, CW 7000 SERIES Frequency band widths available for operation: , , MHz. CW 7000 B Handheld wireless system - cardioid dynamic microphone. R 9, R 10, CW 7001 B Belt pack wireless system, inc. CL 6 cardioid condenser lavalier microphone. R 9, R 10, CW 7001H12 B Headworn system - HW 1200 Cardioid condenser microphone. R 10, R 12, CW 7001H15 B Headworn system - HW 1500 Robust, bi-directional condenser microphone. R 12, R 14, CW 7001H20 B Headworn system - CMH 2000 Lightweight, omni-directional condenser microphone. R 15, R 17, CW 7001H20B BG Headworn system - CMH 2000 Lightweight, omni-directional condenser microphone. R 15, R 17, CW 8000 SERIES Frequency band widths available for operation: , , MHz. CW 8000 B Handheld wireless system - cardioid dynamic microphone. R 16, R 18, CW 8001 B Belt pack wireless system, inc. CL 6 cardioid condenser lavalier microphone. R 16, R 18, CW 8001H12 B Headworn system - HW 1200 Cardioid condenser microphone. R 17, R 20, CW 8001H15 B Headworn system - HW 1500 Robust, bi-directional condenser microphone. R 19, R 21, CW 8001H20 B Headworn system - CMH 2000 Lightweight, omni-directional condenser microphone. R 21, R 24, CW 8001H20B BG Headworn system - CMH 2000 Lightweight, omni-directional condenser microphone. R 21, R 24, CW 9000 SERIES Frequency band widths available for operation: , MHz. CW 9000 B Handheld system - cardioid dynamic microphone. R 9, R 10, CW 9001 B Belt pack system, inc. CL 6 omni-directional condenser lavalier microphone. R 9, R 10, CW 9001H12 B Headworn system - HW 1200 cardioid condenser microphone. R 10, R 12, CW 9001H15 B Headworn system - HW 1500 Robust, bi-directional condenser microphone. R 12, R 14, CW 9001H20 B Headworn system - CMH 2000 Lightweight, omni-directional condenser microphone. R 15, R 17, CW 9001H20B BG Headworn system - CMH 2000 Lightweight, omni-directional condenser microphone. R 15, R 17, CW 9000T B Handheld Transmitter Only for CW 9000 R 3, R 4, UHF Wireless Accessories C 7000C B Cardioid condenser microphone head for CW 7000 handheld transmitter. R 2, R 2, C 9000C B Cardioid condenser microphone head for CW 9000 handheld transmitter. R 1, R 2, S 210X B Floor stand with XLR connectors. R 3, R 4, AB 9000 B Passive antenna booster, compatible with CW 9000, 8000 & Supplied in pairs. R 3, R 3, AA 8000 B Antenna distribution amplifier. BNC connectors, compatable with CW 9000, 8000 & 7000 ( MHz) R 12, R 13, UDA 8000 B Active Directional antenna compatible with CW 8000 ( MHz) R 3, R 3, UOA-8000 B Passive Omni-directional wide band antenna, compatible with CW 8000 & CW R 2, R 2, USP 8000 B Passive antenna splitter/combiner compatible with CW 8000 & CW 7000 ( MHz) R 1, R 1, RRM 9000/RCP 9000 B Rack mount for two CW 9000, 7000 receivers with half rack blanking panel. R R RM 9 B Rack mount for one CW 8000 receiver into 1U. R R RM 10 B Rack mount for two CW 8000 receivers into 1U. R 1, R 1, AEP 9000 B Antenna extension panel, compatible with CW 9000, 8000 & R R CC 9000 B Plastic moulded carrying case for CW 9000 & CW 9001 R R UHF - GUIDED TOUR SYSTEMS Page 5 of 6

6 GT 300 SERIES Selectable frequencies for operation on MHz (GT 300 Series). GT 300T B Belt pack transmitter with built in microphone, rechargeable batteries and lavalier microphone. R 2, R 3, GT 300R B Belt pack receiver with rechargeable batteries and earpiece. DC 302 B 2 unit intelligent recharger for GT 300T, GT 300R R 1, R 1, DC 310 B 10 unit intelligent recharger in flight case. R 8, R 9, DC 320 B 20 unit intelligent recharger in flight case. R 15, R 17, GT Set One B 9 receivers, 1 transmitter, 10 way recharger in aluminium flight case (inc. earpieces & microphone). R 37, R 42, GT Set Two B 19 receivers, 1 transmitter, 20 way recharger in aluminium flight case (inc. earpieces & microphone). R 73, R 83, GT 400 Series Selectable frequencies for operation on MHz (GT 400 Series). GT 400T B Belt pack transmitter with built in microphone, rechargeable lithium batteries and lavalier microphone. R 3, R 3, GT 420T B Cardioid condenser handheld transmitter with rechargeable batteries. R 2, R 3, GT 400R B Belt pack receiver with built in speaker, rechargeable lithium batteries and earpiece. R 3, R 3, GT 520T B Fixed location transmitter for GT 300 & GT 400 series. R 8, R 9, DC 402 B 2 unit intelligent recharger for GT 400T, GT 420T & GT 400R. R 1, R 1, DC 420 B 20 unit 19" rack mount intelligent recharger. R 11, R 12, DC 430 B 30 unit intelligent recharger in flight case. R 21, R 24, GT SET Three B 29 receivers, 1 transmitter, 30 way recharger in aluminium flight case (inc. earpieces & microphone). R 112, R 127, GT SET Four B 19 receivers, 1 transmitter, 20 way recharger rack mount system (inc. earpieces & microphone). R 72, R 82, Tour Guide Accessories HW 400 B Headworn condenser microphone for GT 300T, GT 400T. R R CL 2 B Omni-directional condenser lavalier microphone for GT 300T, GT 400T, inc. clothing clip & windshield. R 1, R 1, CL 2CC B Clothing clip for CL 2. R R GTE 10 B Earpiece for GT 300R, GT 400R. R R GTE-10EP B Disposable foam ear pad covers for GTE 10 earpiece (pack of 50). R R CL 2NS B Neck lanyard for GT 300T, GT 400T & GT 300R, GT 400R. R R NL-90 B Neck worn audio induction loop for GT 300R & GT 400R. R 1, R 1, AUDIO GUIDE AGS-100U B 10 - Way Master Charger system with USB download (inc. hand sets). R 60, R 68, AGS-100 B 10 - Way Extension charger system (inc. hand sets). R 55, R 63, AG-100 B Audio Guide player (hand set). R 4, R 5, AGC-100 B 10 - Slot Extension charger. R 9, R 10, AGC-100U B 10 - Slot Master charger with USB download. R 16, R 18, HEADPHONES & HEADSETS H 500 B Dynamic closed-back monitor headphone. Detachable single 3M cable. R 1, R 1, H 1000 G Ear defender headphones. R 4, R 4, AH 3000 G Ear defender active headset, inc. power adaptor for recharging batteries. R 5, R 6, HS 1000D G Ear defender talk-back headset with dynamic microphone. R 4, R 5, HS 1000E G Ear defender talk-back headset with condenser microphone. R 4, R 5, INTERCOM & PORTABLE LOOP SYSTEM INTERCOM Communicator two way intercom system with induction loop. CA 100 G Combined audio / induction loop amplifier. R 12, R 14, CILA 100 G Loop pad aerial CLF 100 G Flush mount loud speaker. R 3, R 3, CLS 100 G Surface mount loud speaker. R 3, R 3, CMF 100 G Flush mount microphone. R 3, R CML 100 G Surface mount microphone. R 3, R 3, CPS 100 G Power supply unit, 12 VDC 1.6A in-line. CSU 100 G Staff unit with mute switch. R 6, R 7, PORTABLE LOOP CILP - 10 N/A Portable induction loop amplifier with integral microphone, inc. power adaptor. R 7, R 8, PLS - 10 N/A Shelf unit for portable shelf system. R 1, R 2, CUSTOM SOLUTIONS In addition to the standard products featured in this price list, Clockaudio offer a comprehensive OEM Service, and will also customise existing products to individual requirements. To find out more about our OEM Service plus the range of custom colours, finishes and configurations available please contact our UK Office Tel: sales@clockaudio.co.uk FINISH - COLOUR KEY Black Nickel White Gloss White Grey Nextel Beige Clear Smoked Effect B N W GW G BG C S Page 6 of 6