MEMS Microphone Coupon Board
|
|
- Gillian Roberts
- 5 years ago
- Views:
Transcription
1 MEMS Microphone Coupon Board MEMS Microphone Coupon Board Part number(s) Analog and digital MEMS microphone coupon boards Package type Document revision 1.01 Release date 19 May 2017 Document number Notes AKU-AN86 This document describes the components and configurations which are recommended and/or populated on coupon boards supplied for customer sampling.
2 Page 2 Index of Contents 1. ANALOG MEMS MICROPHONES ANALOG MEMS MICROPHONES COUPON BOARD SUMMARY DIGITAL MEMS MICROPHONES DIGITAL MEMS MICROPHONES COUPON BOARD SUMMARY MECHANICAL SPECIFICATIONS DOCUMENT HISTORY AND MODIFICATION reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Bosch
3 Page 3 1. Analog MEMS microphones Table 1: Analog coupon boards for single ended output microphones Device AKU142 AKU143 AKU143P AKU144 AKU340 AKU350 BMU563R Picture Reference Table 5 Reference Table 5 Reference Table 6 Pin out - see table 2 Pin out - see table 2 Pin out - see table 2 AKU342 BMU551R AKU151 C2 C3 C Reference Table 5 Reference Table 5 Reference Table 7 Pin out - see table 2 Pin out - see table 2 Pin out - see table 2 reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Bosch
4 Page 4 Note: Coupon fingers numbered left to right 1 5 when viewed from front or back of the board. Components mounted on actual coupon board may differ from those in picture. Table 2: Analog coupon pin assignment for single- ended output microphones Pin Name Function 1 OUT Analog voltage output 2 GND Ground 3 GND Ground 4 V DD Power supply voltage 5 NC No connect Table 3: Analog coupon board for differential output microphones Device BMU537R Reference Table 8 Pin out- see table 4 reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Bosch
5 Page 5 Table 4: Analog coupon board for differential output microphones Pin Name Function 1 OUT- Analog voltage output 2 NC No Connect 3 GND Ground 4 V DD Power supply voltage 5 OUT+ Analog voltage output MEMS microphones coupon board summary Table 5: AKU142 AKU143 AKU143P AKU144 AKU340 AKU342 BMU551R Marking Component Recommended Value Description/Purpose Default When Shipped U1 MEMS Mic N/A Microphone Populated U2 MEMS Mic N/A Microphone Populated C1 Capacitor 0.1uF Decoupling Cap Not Populated 1 C2 Resistor 0 Ω Ground Connect Populated C3 Capacitor 0.1 µf Decoupling Cap Not Populated 1 C4 Resistor 0 Ω Ground Connect Populated R1 Resistor 0 Ω Ground Connect Populated Table 6: AKU350 Marking Component Recommended Value Description/Purpose Default When Shipped C1 Capacitor 0.1 µf Decoupling Cap Not Populated 1 C2 Capacitor 0.1 µf Decoupling Cap Not Populated 1 Note 1: Populated by default on digital microphone coupon, not populated on analog microphone coupon unless requested reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Bosch
6 Page 6 Table 7: AKU151 Marking Component Recommended Value Description/Purpose Default When Shipped From C1 Capacitor 0.1 µf Decoupling Cap Not Populated 1 C2 Resistor 0 Ω Ground Connect Populated C3 Capacitor 0.1 µf Decoupling Cap Not Populated 1 Note 1: Populated by default on digital microphone coupon, not populated on analog microphone coupon unless requested Table 8: BMU537R Marking Component Recommended Value Description/Purpose Default When Shipped From C1 Capacitor 0.1 µf Decoupling Cap Not Populated 1 R1 Not used N/A N/A Not Populated 1 reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Bosch
7 Page 7 2. Digital MEMS microphones Table 9: Digital coupon boards AKU142 AKU143 AKU143P AKU144 AKU240 AKU240M AKU241 AKU242 AKU242M AKU242P AKU250 AKU250P AKU243 Device AKU440 AKU440M AKU442 AKU442M AKU442C AKU442P AKU441 AKU443 AKU443P AKU450 AKU450P AKU451 Picture Reference Table 8 Reference Table 8 Reference Table 8 Note: Coupon fingers numbered left to right 1 5 when viewed from front or back of the board. Components mounted on actual coupon board may differ from those in picture. Table 10: Digital coupon pin assignment Pin Name Function 1 L/R 2 Left / Right select 2 CLK Clock 3 GND Ground 4 V DD Power supply voltage 5 OUT PDM data output Note 2: L/R pin must be electrically connected to either GND or VDD with no components in between, and shortest possible traces. reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Bosch
8 Page Digital MEMS microphones coupon board summary Table 11: all Digital microphones Marking Component Recommended Value Description/Purpose Default When Shipped C1 Capacitor 0.1 µf Decoupling Cap Populated C2 Resistor 0 Ω Left Mode Select Populated R-Right / R1 Resistor 0 Ω Right Mode Select Not populated. (To configure the microphone into Right Mode remove the 0 Ω resistor on R-Left / R2 and populate R-Right / R1 R-Left / R2 Resistor 0 Ω Left Mode Select 3 Populated Note 3: The MEMS Microphone will be sent left mode by default or right mode by request. reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Bosch
9 Page 9 3. Mechanical Specifications Coupons Thickness (T) see table below Item Dimension Tolerance Units Length (L) ± 0.20 mm Width (W) 7.37 ± 0.20 mm Thickness (T) of top port microphone coupons 1.70 ± 0.10 mm Thickness (T) of bottom port microphone coupons 0.62 ± 0.10 mm Note: The dimensions given are typical dimensions of the coupons. Individual coupon are broken off from a panel / array of coupons and may have jagged edges. Therefore, the dimensions are for reference only of a typical coupon. reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Bosch
10 Page Document history and modification Revision Number Chapter Description of modification/changes Date 1.0 All Document creation 01-Dec Added BMU37R 19-May Smallman Street, Suite 200 Pittsburgh, PA / USA (412) sales@akustica.com Modifications reserved Printed in USA Specifications subject to change without notice reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Bosch
Data sheet AKU440 / AKU441 / AKU443 Digital Silicon MEMS Microphones
AKU440 / AKU441 / AKU443 Digital Silicon MEMS Microphones AKU440 / AKU441 / AKU443 Data Sheet Package type 5-pad LGA bottom-port, metal lid revision 1.15a Release date 02 September 2016 Document number
More informationData sheet AKU450P/AKU450 Digital, HD Voice Silicon MEMS Microphone
AKU450P/AKU450 Digital, HD Voice Silicon MEMS Microphone AKU450P / AKU450 Data Sheet Package type 5-pad LGA bottom port Document revision 1.03a Document release date 31 May 2017 Document number AKU-AKU450P-DS49
More informationPAM8304-EV board User Guide AE Department. Date Revision Description Comment
1. Revision Information -EV board User Guide AE Department Date Revision Description Comment 2013/5/31 V1.0 Initial release 1 of 5 2. Key Features Supply Voltage from 2.8V to 6.0V 3.0W@10% THD Output with
More informationData sheet AKU243 Digital, HD Voice Silicon MEMS Microphone
Page 1 AKU243 Digital, HD Voice Silicon MEMS Microphone AKU243 Data Sheet Package type 8-pad LGA top-port, L2L Document revision 1.1a Document release date 29 June 2016 Document number AKU-AKU243-DS53
More informationData sheet BMU563R Analog, HD Voice Silicon MEMS Microphone
Data sheet Page 1 Data sheet BMU563R Analog, HD Voice Silicon MEMS Microphone BMU563R Data Sheet Package type 5-pad LGA bottom port Document revision 1.01a Document release date 22 February 2017 Document
More informationPCB Layout and Design Guide for CH7102A HDMI to BT656 Converter with IIC Slave
Chrontel AN-B07 Application Notes PCB Layout and Design Guide for CH70A HDMI to BT Converter with IIC Slave.0 INTRODUCTION The CH70A is a low-cost, low-power semiconductor device, which can convert HDMI
More informationData sheet AKU340 Analog, Silicon MEMS Microphone
AKU340 Analog, Silicon MEMS Microphone AKU340 - Datasheet Package type 5-pad LGA, bottom port, metal lid Document revision 1.1a Document release date 29 June 2016 Document number AKU-AKU340-DS26 Technical
More informationAKU143 Top Port, Analog Silicon MEMS Microphone
AKU143 AKU143 Top Port, Part number(s) Package type AKU143 4-pin LGA top port Data sheet revision 1.01 Release date 12 December 2014 Document number Notes DS37-1.01 AKU143 Specifications are subject to
More informationData sheet AKU350 Analog, HD Voice Silicon MEMS Microphone
Page 1 AKU350 Analog, HD Voice Silicon MEMS Microphone AKU350 Data Sheet Package type 5-pad LGA bottom-port, metal lid Document revision 1.2a Document release date 14 November 2016 Document number AKU-AKU350-DS43
More informationSiSonic FLEX Evaluation Kit KAS USER GUIDE.
Contents 1. Digital to Analog Converter (DAC) PCB 2. Mic-On-Flex Assemblies (10 Total) 3. Adapter PCBs (Digital and Analog) 1 2 3 Description The evaluation kit allows for simple and easy evaluation of
More informationData sheet AKU151 Analog, Silicon MEMS Microphone
Preliminary Data Sheet AKU151 Page 1 AKU151 Analog, Silicon MEMS Microphone AKU151 Data Sheet Package type Document revision 1.0a 4-pad LGA top port, metal lid Document release date 14 November 2016 Document
More informationAN_8430_002 April 2011
A Maxim Integrated Products Brand 78Q8430 10/100 Ethernet MAC and PHY APPLICATION NOTE AN_8430_002 April 2011 Introduction 78Q8430 Layout Guidelines The TSC 78Q8430 is a single chip 10Base-T/100Base-TX
More informationData sheet AKU142 Analog, Silicon MEMS Microphone
AKU142 Analog, Silicon MEMS Microphone AKU142 - Data Sheet Package type 4-pad LGA top port, L2L Document revision 1.1a Document release date 29 June 2016 Document number AKU-AKU142-DS32 Technical Reference
More informationHDMI To HDTV Converter
Chrontel AN-B0 Application Notes P C B L ayout and Desig n Guide for CH7 03B HDMI To HDTV Converter.0 INTRODUCTION The CH703B is a low-cost, low-power semiconductor device, which can convert HDMI signals
More informationHigh-Speed Layout Guidelines for Reducing EMI for LVDS SerDes Designs. I.K. Anyiam
High-Speed Layout Guidelines for Reducing EMI for LVDS SerDes Designs I.K. Anyiam 1 Introduction LVDS SerDes helps to reduce radiated emissions, but does not completely eliminate them EMI prevention must
More informationApplication Suggestions for X2Y Technology
Application Suggestions for X2Y Technology The following slides show applications that would benefit from balanced, low inductance X2Y devices. X2Y devices can offer a significant performance improvement
More informationAKU440 Family Bottom Port, Digital Silicon MEMS Microphones
AKU440 Family AKU440 Family Bottom Port, Part number(s) Package type Data sheet revision 1.0 AKU440, AKU441, AKU442* 5-pin LGA bottom port Release date 06 November 2014 Document number Notes DS46-1.0 AKU440
More informationPI6C557-01BQ. PCIe 3.0 Clock Generator with 1 HCSL Outputs. Features. Description. Pin Configuration (16-Pin TQFN) Block Diagram
s Features ÎÎPCIe 3.0 compliant à à Phase jitter - 0.45ps RMS (High Freq. Typ.) ÎÎLVDS compatible output ÎÎSupply voltage of 3.3V ±10% ÎÎ25MHz crystal or clock input frequency ÎÎHCSL outputs, 0.8V Current
More informationAchieving EMV Electrical Compliance with the Teridian 73S8024RN
August 2005 Achieving EMV Electrical Compliance with the Teridian 1 Introduction This application note highlights particular testing considerations required to achieve compliance for payment systems smart
More informationImplementing the Teridian 73S8024RN in NDS Applications
April 2007 Implementing the Teridian in NDS Applications 1 Introduction This application note highlights particular design considerations required to implement Conditional Access smart card interfaces
More informationAKU240 Family Top port, Digital Silicon MEMS Microphones
AKU240 Family AKU240 Family Top port, Part number(s) Package type Data sheet revision 1.01 AKU240, AKU241, AKU242 8-pin LGA top port Release date 23 December 2014 Document number Notes DS45-1.01 AKU240
More informationUsers Manual. KAS Walleye Microphone Evaluation Kit
Users Manual KAS-100-00 Walleye Microphone Evaluation Kit KAS-100-00 Kit Description The KAS-100-00 Walleye microphone evaluation kit allows for simple and easy evaluation of SiSonic MEMS microphones.
More information3SM201KMF0KB MEMS Microphone
Product Description The is a monolithic MEMS top performing miniature digital microphone based on CMOS foundry process. By integrating an acoustic transducer and an analog amplifier circuit followed by
More information2:1 MULTIPLEXER CHIP FOR PCI-EXPRESS ICS Description. Features. Block Diagram DATASHEET
DATASHEET 2:1 MULTIPLEXER CHIP FOR PCI-EXPRESS ICS557-08 Description The ICS557-08 is a 2:1 multiplexer chip that allows the user to select one of the two HCSL (Host Clock Signal Level) or LVDS input pairs
More informationFeatures. Applications
HCSL-Compatible Clock Generator for PCI Express General Description The is the smallest, high performance, lowest power, 2 differential output clock IC available for HCSL timing applications. offers -130dBc
More information3SM201KMT1KB MEMS Microphone
MEMS Microphone Product Description The is a monolithic MEMS top performing miniature digital microphone based on CMOS foundry process. By integrating an acoustic transducer and an analog amplifier circuit
More informationDS2120 Ultra3 LVD SCSI Terminator
Ultra3 LVD SCSI Terminator www.maxim-ic.com FEATURES Fully Compliant with Ultra3, Ultra160, Ultra320, and Ultra2 (LVD only) SCSI Provides Low-Voltage Differential (LVD) Termination for Nine Signal Line
More informationGRAVITECH GROUP
GRAVITECH.US uresearch GRAVITECH GROUP Description The I2C-OSC board is an 8-pin CMOS 1KHz 68MHz Programmable Oscillator device using I 2 C bus. There are no external components required. Only two signal
More informationAKU142 Top Port, Analog Silicon MEMS Microphone
AKU142 AKU142 Top Port, Part number(s) Package type AKU142 Data sheet revision 1.03 4-pin LGA top port Release date 21 October 2014 Document number Notes DS32-1.03 AKU142 Specifications are subject to
More information2:1 MULTIPLEXER CHIP FOR PCI-EXPRESS ICS Features
DATASHEET 2:1 MULTIPLEXER CHIP FOR PCI-EXPRESS ICS557-08 Description The ICS557-08 is a 2:1 multiplexer chip that allows the user to select one of the two HCSL (Host Clock Signal Level) input pairs and
More informationMidas Components Limited Electra House 32 Southtown Road Great Yarmouth Norfolk NR31 0DU England
LVDS input to 40 Way LVDS Display Interface Board Part Number: MCIB-16 Version: 1 Date: 04/05/2016 Revision History Date Description of change 04/05/2016 First draft 1 MCIB-16 LVDS input to 40 Way LVDS
More informationDM9051NP Layout Guide
NP Version: 1.1 Technical Reference Manual Davicom Semiconductor, Inc Version: NP-LG-V11 1 1. Placement, Signal and Trace Routing Place the 10/100M magnetic as close as possible to the (no more than 20mm)
More informationGRAVITECH GROUP
GRAVITECH.US uresearch GRAVITECH GROUP Description The I2C-ADC board is a 14-pin CMOS device that provides 8-CH, 12-bit of Analog to Digital Converter (ADC) using I 2 C bus. There are no external components
More informationPCB Layout and design Considerations for CH7007 and CH7008
Application Notes PCB Layout and design Considerations for CH7007 and CH7008 Introduction This application note focuses on the basic PCB layout and design guidelines for the CH7007 and CH7008 VGA-to-TV
More informationDS2118M Ultra3 LVD/SE SCSI Terminator
Ultra3 LVD/SE SCSI Terminator www.maxim-ic.com FEATURES Fully Compliant with SCSI SPI-2, SPI-3, SPI-4, Ultra160, and Ultra320 Provides Multimode Low-Voltage Differential/Single-Ended (LVD/SE) Termination
More informationEvaluation Board for AZS10 Ultra-Low Phase Noise Buffer & Translator
AZS10EVB DATASHEET Mar 2017 www.azmicrotek.com RFA 04 004 Rev 2.1 Evaluation Board for AZS10 Ultra-Low Phase Noise Buffer & Translator Description The AZEBS10 evaluation board is a multi layer PCB assembly
More informationREV CHANGE DESCRIPTION NAME DATE. A Release
REV CHANGE DESCRIPTION NAME DATE A Release 5-29-08 Any assistance, services, comments, information, or suggestions provided by SMSC (including without limitation any comments to the effect that the Company
More informationAKU344 Bottom Port, Analog Silicon MEMS Microphone
AKU344 AKU344 Bottom Port, Part number(s) Package type AKU344 Data sheet revision 1.01 LGA, bottom port, metal lid Release date 12 December 2014 Document number Notes DS36-1.01 AKU344 Specifications are
More informationMIC502 Evaluation Board
Fan Management IC General Description The combination evaluation/demonstration board for the MIC502 Fan Management IC is depicted in a typical hookup in Figure 1. This dual-purpose board can be used (1)
More informationUsers Manual. KAS Walleye Microphone Evaluation Kit
Users Manual KAS-33100-00 Walleye Microphone Evaluation Kit KAS-33100-00 Kit Description The KAS-33100-00 Walleye microphone evaluation kit allows for simple and easy evaluation of SiSonic MEMS microphones.
More informationObsolete. LX1800 SMBus TO ANALOG INTERFACE
LX1800 SMBus TO ANALOG INTERFACE TM Page 1 INTRODUCING TO PRODUCT The LX1800 Evaluation Board is available from for evaluating the functionality and performance of the LX1800 SMBus to Analog Interface
More informationAKU340 Bottom Port, Analog Silicon MEMS Microphone
AKU340 AKU340 Bottom Port, Datasheet Part number(s) Package type AKU340 Data sheet revision 1.03 LGA, bottom port, metal lid Release date 10 October 2014 Document number Notes DS26-1.03 AKU340 Specifications
More informationManual iaq-engine Indoor Air Quality sensor
Manual iaq-engine, Version 2.0 May 2011 (all data subject to change without notice) Manual iaq-engine Indoor Air Quality sensor Digital and analog I/O SMD type package Product summary iaq-engine is used
More informationTECHNICAL NOTE. VS1000: Evaluation Kit EVBA_2.0. Contents. EVBA_2.0 is a plug and play Evaluation Kit for Colibrys VS1000 accelerometers line.
VS1000: Evaluation Kit EVBA_2.0 EVBA_2.0 is a plug and play Evaluation Kit for Colibrys VS1000 accelerometers line. To facilitate the integration in user environment and easily verify the excellent performances
More informationTS2043 Preliminary CMOS IC
UNISONIC TECHNOLOGIES CO., LTD TS2043 Preliminary CMOS IC TOUCH PANEL CONTROLLER DESCRIPTION The UTC TS2043 is a highly integrated 12-bit SAR analog-to-digital (A/D) converter designed for touch panel
More informationDigital "Mini" SiSonic TM Microphone Specification - Halogen Free. Knowles Acoustics 1151 Maplewood Drive Itasca, IL 60143
Digital "Mini" SiSonic TM Microphone Specification - Halogen Free Knowles Acoustics 1151 Maplewood Drive Itasca, IL 60143 Sheet 1 of 11 1. DESCRIPTION AND APPLICATION 1.1 DESCRIPTION Digital "Mini" Surface
More informationIP1001 LF DESIGN & LAYOUT GUIDELINES
Index 1 Purpose...2 2 Magnetic trace routing...2 3 Power Supply Plane & GND Plane...3 4 PHY interface...3 5 Trace routing & Placement...3 6 ESD protection...3 7 EMI Supression...3 1/7 April 17 2008. Ver:1.5
More informationA0021. Overview. Features. Ordering Information. HSS Touch Signature IC 6 Input - I 2 C. Part Number Format: A X Y Z
VSS NC NC VDD SDA SENSOR 2 SENSOR 1 ADD1 HSS Touch Signature IC 6 Input - I 2 C A0021 Overview The patented AlSentis A0021 Touch IC is a complete 1 6 input touch sensing solution. It includes all signal
More informationPAN3504 USB OPTICAL MOUSE SINGLE CHIP
General Description USB OPTICAL MOUSE SINGLE CHIP The is a CMOS process optical mouse sensor single chip with USB interface that serves as a nonmechanical motion estimation engine for implementing a computer
More informationAN-1383 Application Note
One Technology Way P.O. Box 9106 Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 Fax: 781.461.3113 www.analog.com ADP1046A EEPROM Programming by Navdeep Singh Dhanjal, Hossain Opal, and Subodh Madiwale
More informationPi-Tek OLED Module PG12864KW Revision: 1.0 May Pi Tek. OLED Module SPECIFICATIONS MODEL NO. : PG12864KW PRODUCT TYPE: STANDARD
Pi Tek OLED Module SPECIFICATIONS MODEL NO. : PG12864KW PRODUCT TYPE: STANDARD This specification may be changed without any notices in order improve performance or quality etc. 1 Content History of versions
More informationGetting started with X-NUCLEO-IHM06A1 low voltage stepper motor driver expansion board based on STSPIN220 for STM32 Nucleo
User manual Getting started with X-NUCLEO-IHM06A1 low voltage stepper motor driver expansion board based on STSPIN220 for STM32 Nucleo Introduction The X-NUCLEO-IHM06A1 is a low voltage stepper motor driver
More informationA0061. Overview. Features. Ordering Information. HSS Touch Signature IC 15 Input - I 2 C. Part Number Format: A X Y Z
Sensor5 ADD2 ADD1 SCL SDA Sensor6 Sensor7 Sensor1 Sensor0 Reset NC NC Sensor14 Sensor13 HSS Touch Signature IC 15 Input - I 2 C A0061 Overview The patented AlSentis A0061 Touch IC is a complete 1 15 input
More informationAL422 Data Sheets (Revision V1.1)
Data Sheets (Revision V1.1) Amendments (Since April 2, 1999) 05-13-99 DC/AC characteristics (including current consumption) updated. 07-02-99 Pinout diagram (5.0) and DC external load (7.4) modified. 08-03-99
More informationTS1000T Ceramic Evaluation Board (CEB1000_1)
TS1000T Ceramic Evaluation Board (CEB1000_1) These ceramic evaluation boards for the high-temperature TS1000T-series accelerometers are optimized evaluation boards designed to allow users to quickly and
More informationILI2312. ILI2312 Single Chip Capacitive Touch Sensor Controller. Specification ILI TECHNOLOGY CORP. Version: V1.03.
Single Chip Capacitive Touch Sensor Controller Specification Version: V1.03 Date: 2015/11/17 ILI TECHNOLOGY CORP. 8F, No.38, Taiyuan St., Jhubei City, Hsinchu County 302, Taiwan, R.O.C. Tel.886-3-5600099;
More informationEMC Guidelines for MPC500-Based Automotive Powertrain Systems
Order this document by: AN2127/D APPLICATION NOTE EMC Guidelines for MPC500-Based Automotive Powertrain Systems by Stevan Dobrasevic Advanced Vehicle Systems Division, Motorola SPS Rev. 1, 11 March 2002
More information± 2g Tri-Axis Accelerometer Specifications
Product Description The is a tri-axis, silicon micromachined accelerometer with a full-scale output range of ±g (19.6m/s ). The sense element is fabricated using Kionix s proprietary plasma micromachining
More informationA4988 Stepper Motor Driver Carrier
A4988 Stepper Motor Driver Carrier A4983/A4988 stepper motor driver carrier with dimensions. Overview This product is a carrier board or breakout board for Allegro s A4988 DMOS Microstepping Driver with
More information2 TO 4 DIFFERENTIAL CLOCK MUX ICS Features
DATASHEET 2 TO 4 DIFFERENTIAL CLOCK MUX ICS557-06 Description The ICS557-06 is a two to four differential clock mux designed for use in PCI-Express applications. The device selects one of the two differential
More informationFUNCTIONAL BLOCK DIAGRAM DIGITAL POWER SUPPLY +5V +3.3V EXT. EXTERNAL ANALOG POWER SUPPLY V LOGIC V DD V SS SPI INTERFACE RDY RESET AD5292 GND
Evaluation Board for the 10-Bit, Serial Input, High Voltage Digital Potentiometer EVAL-AD5292EBZ FEATURES Full-featured evaluation board for the AD5292 Wiper buffer 4-wire ohm measurement capability Various
More information73S8014R/RN/RT 20SO Demo Board User Manual July, 2008 Rev. 1.0 UM_8014_010
Simplifying System Integration TM 73S804R/RN/RT 0SO Demo Board User Manual July, 008 Rev..0 UM_804_00 73S804R/RN/RT 0SO Demo Board User Manual UM_804_00 008 Teridian Semiconductor Corporation. All rights
More information± 10g Tri-axis Accelerometer Specifications
Product Description The is a Tri-axis, silicon micromachined accelerometer with a full-scale output range of +/-10g (98 m/s/s). The sense element is fabricated using Kionix s proprietary plasma micromachining
More informationA4988 Stepper Motor Driver Carrier, Black Edition
A4988 Stepper Motor Driver Carrier, Black Edition A4988 stepper motor driver carrier, Black Edition, bottom view with dimensions. Overview This product is a carrier board or breakout board for Allegro
More informationAKU342 Bottom port, Analog Silicon MEMS Microphone
Bottom port, Part number(s) Package type Data sheet revision 1.04 6-pin LGA bottom port Release date 10 October 2014 Document number Notes DS28-1.04 Specifications are subject to change without notice.
More informationSymbol Parameter Min Typ Max VDD_CORE Core power 0.9V 1.0V 1. 1V. VDD33 JTAG/FLASH power 2.97V 3.3V 3.63V
1 Introduction The user guide provides guidelines on how to help you successfully design the CME-M7 board which includes the power supply, configuration, clock, DDR2 or DDR3, high speed USB, LVDS and ADC
More informationUNISONIC TECHNOLOGIES CO.,LTD. UL318 Preliminary LINEAR INTEGRATED CIRCUIT
UNISONIC TECHNOLOGIES CO.,LTD. UL318 Preliminary LINEAR INTEGRATED CIRCUIT SERIAL-INTERFACED 10-DIGIT LED CONTROLLER IC WITH KEYSCAN DESCRIPTION The UL318 is a compact LED controller and driver that interface
More informationControl Circuitry 2 M1. Micrel Inc Fortune Drive San Jose, CA USA tel +1 (408) fax + 1 (408)
Crystal-less Configurable Clock Generator General Description The is a programmable, high performance dual LVDS output oscillator utilizing Micrel's proven silicon MEMS technology to provide excellent
More informationMaxim Integrated Products 1
19-3093; Rev 0; 12/03 MAX3942 Evaluation Kit General Description The MAX3942 evaluation kit (EV kit) is an assembled demonstration board that provides electrical evaluation of the MAX3942 10.7Gbps modulator
More information± 2g Tri-axis Accelerometer Specifications
Product Description The is a Tri-axis, silicon micromachined accelerometer with a full-scale output range of +/-2g (19.6 m/s/s). The sense element is fabricated using Kionix s proprietary plasma micromachining
More informationApplication Note 1245
Evaluation Board for Small Form Factor (SFF) Through Hole Transceivers Application Note 1245 SFF Evaluation Board The purpose of this Small Form Factor (SFF) through hole evaluation board is to provide
More informationTHC63LVDM83D / THC63LVDF(R)84C Evaluation Kit
THAN0_Rev..0_E THCLVDMD / THCLVDF(R)C Evaluation Kit LVDS Single Link Evaluation Board Parts Number: THEVAMD, THEVAF(R)C.General Description THEVAMD and, THEVAF(R)C boards are designed to support video
More informationPIC 28 Pin Board Documentation. Update Version 5.0
PIC 28 Pin Board Documentation Update 2009.10 Version 5.0 Table of Contents PIC 28 Pin Board Documentation... 1 Table of Contents... 2 Introduction... 3 Circuit Schematic... 4 The following is the Circuit
More informationDS2118M Ultra2 LVD/SE SCSI Terminator
Ultra2 LVD/SE SCSI Terminator www.dalsemi.com FEATURES Fully compliant with Ultra2 SCSI Provides Multimode Low Voltage Differential/Single-Ended (LVD/SE) termination for 9 signal line pairs Auto-selection
More informationTHC63LVDM83D / THC63LVDF(R)84B,84C Evaluation Kit
THCLVDMD / THCLVDF(R)B,C Evaluation Kit LVDS Single Link Evaluation Board Parts Number: THEVAMD, THEVAF(R)B, THEVAF(R)C.General Description THEVAMD and, THEVAF(R)B, C boards are designed to support video
More informationREV CHANGE DESCRIPTION NAME DATE. A Release
REV CHANGE DESCRIPTION NAME DATE A Release 11-07-12 Any assistance, services, comments, information, or suggestions provided by SMSC (including without limitation any comments to the effect that the Company
More informationPI2EQX6811ZDE PI2EQX6811ZDE Evaluation Board Rev.B User Guide Nov.16, 2011
Contents Introduction Board Operation Power options Device configuration System connection Power-on sequence Board Design Information PCB Schematic PCB Layout Reference PCB BOM List PIEQX68ZDE PIEQX68ZDE
More informationLMV1022 / LMV1023 Digital Output PDM Microphone Amplifier Demo Board User's Guide
LMV1022 / LMV1023 Digital Output PDM Microphone Amplifier Demo Board User's Guide Introduction The LMV1022/LMV1023 demo board provides a means for easy evaluation of digital PDM microphone amplifiers like
More informationPI6LC48L0201A 2-Output LVDS Networking Clock Generator
Features ÎÎTwo differential LVDS output pairs ÎÎSelectable crystal oscillator interface or LVCMOS/LVTTL single-ended clock input ÎÎSupports the following output frequencies: 62.5MHz, 125MHz, 156.25MHz
More informationPEX 8604 Hardware Design Checklist
September 11, 2014 Revision 1.1 PEX 8604 Hardware Design Checklist Revision History Rev 1.1: On page 5, Correction in Recommendation column of STRAP_PORTCFG[1:0] for x2x2 from HH to HL and HH changed to
More informationXRD8775 CMOS 8-Bit High Speed Analog-to-Digital Converter
CMOS 8-Bit High Speed Analog-to-Digital Converter April 2002-4 FEATURES 8-Bit Resolution Up to 20MHz Sampling Rate Internal S/H Function Single Supply: 5V V IN DC Range: 0V to V DD V REF DC Range: 1V to
More informationEdge Power International (HK) Ltd. Product Specification
Edge Power International (HK) Ltd. EPM-1000 GSM Module Specification Product Specification Revision history Revision Date Description V1.0 28/05/2012 Original Date: 5/29/2012 1 TABLE OF CONTENTS1.... INTRODUCTION
More informationOmnidirectional Microphone with Bottom Port and Analog Output ADMP401
FEATURES 4.72 mm 3.76 mm 1.0 mm surface-mount package High SNR of 62 dba Sensitivity of 42 dbv Flat frequency response from 100 Hz to 15 khz Low current consumption of
More informationA Micropower, 2-channel, ksps, Serial-Output 12-bit SAR ADC
A Micropower, 2-channel, 187.5-ksps, Serial-Output 12-bit SAR ADC FEATURES Quick and easy Interface to computer for evaluation via Touchstone Viperboard and USB cable Input BNC connection On-board +3.3V
More informationASIX USB-to-LAN Applications Layout Guide
ASIX USB-to-LAN Applications Revision 1.0 Dec. 11th, 2007 1 Revision Date Description 1.0 2007/12/11 New release. ASIX USB-to-LAN Applications Revision History 2 Content 1. Introduction...4 2. 4-Layer
More informationMaxim Integrated Products 1
9-2479; Rev 0; 6/02 MAX28 Evaluation Kit General Description The MAX28 evaluation kit (EV kit) is designed to evaluate the MAX28. The MAX28 is a 2-bit, 2-channel (six differential-channel) ADC with a 2-wire
More informationEvaluates: MAX98357A/MAX98357B (TQFN) MAX98357 Evaluation System (TQFN)
General Description The MAX98357 development board (DEV board) is a fully assembled and tested PCB that evaluates the MAX98357 I2S digital input Class D power amplifier. The DEV board operates from a single
More informationILI2303. ILI2303 Capacitive Touch Sensor Controller. Specification
Capacitive Touch Sensor Controller Specification Version: V1.03 Date: 2014/9/17 ILI TECHNOLOGY CORP. 8F, No.38, Taiyuan St., Jhubei City, Hsinchu County 302, Taiwan, R.O.C. Tel.886-3-5600099; Fax.886-3-5600055
More informationEvaluation Board for the AD7709, 16-Bit, Sigma Delta ADC with Current Sources EVAL-AD7709-EB
a Evaluation Board for the AD7709, 16-Bit, Sigma Delta ADC with Current Sources EVAL-AD7709-EB FEATURES Full-Featured Evaluation Board for the AD7709 On-Board Reference and Digital Buffers Various Linking
More informationPI2EQX6874ZFE 4-lane SAS/SATA ReDriver Application Information
Contents General Introduction How to use pin strap and I2C control External Components Requirement Layout Design Guide Power Supply Bypassing Power Supply Sequencing Equalization Setting Output Swing Setting
More informationXRD87L85 Low-Voltage CMOS 8-Bit High-Speed Analog-to-Digital Converter
Low-Voltage CMOS 8-Bit High-Speed Analog-to-Digital Converter April 2002-1 FEATURES 8-Bit Resolution Up to 10 MHz Sampling Rate Internal S/H Function Single Supply: 3.3V VIN DC Range: 0V to V DD VREF DC
More informationPI6C182B. Precision 1-10 Clock Buffer. Features. Description. Diagram. Pin Configuration
Features Low noise non-inverting 1-10 buffer Supports frequency up to 140 MHz Supports up to four SDRAM DIMMs Low skew (
More informationMAX 10 FPGA Signal Integrity Design Guidelines
2014.12.15 M10-SIDG Subscribe Today s complex FPGA system design is incomplete without addressing the integrity of signals coming in to and out of the FPGA. Simultaneous switching noise (SSN) often leads
More informationDS1233A 3.3V EconoReset
3.3V EconoReset www.maxim-ic.com FEATURES Automatically restarts microprocessor after power failure Monitors pushbutton for external override Internal circuitry debounces pushbutton switch Maintains reset
More informationSGM Channel, 6th-Order Video Filter Driver for SD/HD
PRODUCT DESCRIPTION The SGM9346 video filter is intended to replace passive LC filters and drivers with an integrated device. Six 6th-order Butterworth filters provide improved image quality compared to
More informationDS21T09 Plug and Play SCSI Terminator
DS21T09 Plug and Play SCSI Terminator www.dalsemi.com FEATURES Fully compliant with SCSI-1, Fast SCSI and Ultra SCSI Compatible with Plug and Play SCSI Profile Functional drop in replacement for the DS2109
More informationPCIe 3.0 Clock Generator with 4 HCSL Outputs. Description OE VDDXD S0 S1 S2 X1 X2 PD OE GNDXD IREF CLK0 CLK0 CLK1 CLK1 CLK2 CLK2 CLK3 CLK3
PCIe 3.0 Clock Generator with 4 HCSL Outputs Features PCIe 3.0 complaint PCIe 3.0 Phase jitter: 0.48ps RMS (High Freq. Typ.) LVDS compatible outputs Supply voltage of 3.3V ±5% 25MHz crystal or clock input
More informationNovalithIC H-Bridge Demo Board
Demo Board Description V1.0, 2011-09-23 Automotive Power General Description Figure 1 Demo board (top view) 1 General Description The NovalithIC H-Bridge/Dual-Halfbridge Demo Board contains two NovalithICs
More informationDS21S07AE. SCSI Terminator
DS21S07A SCSI Terminator www.maxim-ic.com GENERAL DESCRIPTION Fast SCSI and Ultra SCSI require the use of active terminations at both ends of every cable segment in a SCSI system with single-ended drivers
More informationEVAL-INAMP-62RZ/82RZ/82RMZ
Evaluation Boards for the AD620 Series and and the AD8220 Series Instrumentation Amplifiers EVAL-INAMP-62RZ/82RZ/82RMZ FEATURES 3 generic, easy-to-use PC boards Support several related in-amp products
More information