PRDCMT12-4DO PRDCMT12-4DC PRDCMT18-7DO PRDCMT18-7DC PRDCMLT12-4DO-I PRDCMLT12-4DC-I

Transcription

1 Long Distance Connector type Long distance connector type proximity Features Long sensing distance (. to times onger sensing distance guaranteed compared to existing modes) Advanced durabiity as comprehensive existing case and rear cap structure Easy to check operation from various anges with side LED Shorten the time of maintenance Improved the noise resistance with dedicated IC Buitin surge protection, reverse poarity protection, overcurrent protection circuit Red LED operation Protection structure IP6(IEC standard) Pease read Caution for your safety in operation manua before using. Specifications DC wire type PRDCMTDO PRDCMTDC PRDCMT8DO PRDCMT8DC PRDCMT8DO PRDCMT8DC PRDCMT8DO PRDCMT8DC PRDCMT0DO PRDCMT0DC PRDCMT0DO PRDCMT0DC PRDCMT08DO PRDCMT08DO PRDCMTDOI PRDCMT8DOI PRDCMT8DOI PRDCMT8DOI PRDCMT0DOI PRDCMT0DOI Mode PRDCMT08DC PRDCMT08DC PRDCMTDCI PRDCMT8DCI PRDCMT8DCI PRDCMT8DCI PRDCMT0DCI PRDCMT0DCI PRDCMT08DOI PRDCMT08DOI PRDCMLTDO PRDCMLT8DO PRDCMLT8DO PRDCMLT8DO PRDCMLT0DO PRDCMLT0DO PRDCMT08DCI PRDCMT08DCI PRDCMLTDC PRDCMLT8DC PRDCMLT8DC PRDCMLT8DC PRDCMLT0DC PRDCMLT0DC PRDCMLTDOI PRDCMLTDCI PRDCMLT8DOI PRDCMLT8DOI PRDCMLT8DOI PRDCMLT0DOI PRDCMLT0DOI PRDCMLT8DCI PRDCMLT8DCI PRDCMLT8DCI PRDCMLT0DCI PRDCMLT0DCI distance mm mm 8mm mm mm mm mm Hysteresis Max. 0% of sensing distance Standard sensing 8 8 mm mm mm 0 0 mm 0 0 mm mm mm Setting distance 0 to.mm 0 to.8mm 0 to.6mm 0 to.6mm 0 to 9.8mm 0 to 0.mm 0 to.mm (Operating votage) Leakage current VDC (0DC) Max. 0.6mA Response frequency 600Hz 00Hz 00Hz 00Hz 0Hz 00Hz 00Hz Residua votage Max..V Affection by Max. ±0% for sensing distance at ambient temperature 0 Contro output to 00mA Insuation resistance Min. 0MΩ(at 0DC megger) Dieectric strength 0AC 0/60Hz for minute Vibration mm ampitude at frequency of 0 to Hz(for min.) in each of X, Y, Z directions for hours Shock 00m/s²(approx. 0G) in each of X, Y, Z directions for times Environment Ambient temperature to 0, storage: 0 to 80 Ambient humidity to 9%RH, storage: to 9%RH Protection circuit Surge protection circuit, Reverse poarity protection circuit, Overcurrent protection circuit Materia Case/Nut: Nicke pated Brass, Washer: Nicke pated Iron, surface: Heatresistant ABS Approva Protection IP6(IEC Standard) Unit Existing weight PRDCMT: Approx. 6g PRDCMLT: Approx. 6g PRDCMT: Approx. 8g PRDCMLT: Approx. 66g PRDCMT: Approx. g PRDCMLT: Approx. 8g Upgrade Approx..g Approx. g Approx..g Approx. g Approx. 6.g Approx..g Approx. 60g Approx. 6g : PRDCMT series is going to upgrade performance(side LED) and structure(comprehensive existing case and rear cap type). : The response frequency is the average vaue. The standard sensing is used and the width is set as times of the standard sensing, / of the sensing distance for the distance. : Upgrade weight is ony for PRDCMT( Upgrade ). Refer to the existing weight for the other modes or existing products. Environment resistance is rated at no freezing or condensation. eectric r D

2 Specifications DC wire type Mode PRDCMDN PRDCMDP PRDCMDN PRDCMDP PRDCMLDN PRDCMLDP PRDCMLDN PRDCMLDP PRDCM8DN PRDCM8DP PRDCM8DN PRDCM8DP PRDCML8DN PRDCML8DP PRDCML8DN PRDCML8DP PRDCM8DN PRDCM8DP PRDCM8DN PRDCM8DP PRDCML8DN PRDCML8DP PRDCML8DN PRDCML8DP PRDCM8DN PRDCM8DP PRDCM8DN PRDCM8DP PRDCML8DN PRDCML8DP PRDCML8DN PRDCML8DP PRDCM0DN PRDCM0DP PRDCM0DN PRDCM0DP PRDCML0DN PRDCML0DP PRDCML0DN PRDCML0DP PRDCM0DN PRDCM0DP PRDCM0DN PRDCM0DP PRDCML0DN PRDCML0DP PRDCML0DN PRDCML0DP distance mm 8mm mm mm mm mm Hysteresis Max. 0% of sensing distance Standard sensing mm mm 0 0 mm 0 0 mm mm mm Setting distance 0 to.8mm 0 to.6mm 0 to.9mm 0 to 9.8mm 0 to 0.mm 0 to.mm (Operating votage) Current consumption VDC (0DC) Max. 0mA Response frequency 00Hz 00Hz 00Hz 00Hz 00Hz 00Hz Residua votage Max..V Affection by Max. ±0% for sensing distance at ambient temperature 0 Contro output Max. 00mA Insuation resistance Min. 0MΩ(at 0DC megger) Dieectric strength 0AC 0/60Hz for minute Vibration mm ampitude at frequency of 0 to Hz(for min.) in each of X, Y, Z directions for hours Shock 00m/s²(approx. 0G) in each of X, Y, Z directions for times (Red LED) Environment Ambient temperature to 0, storage: 0 to 80 Ambient humidity to 9%RH, storage: to 9%RH Protection circuit Surge protection circuit, Reverse poarity protection circuit, Overcurrent protection circuit Protection IP6(IEC specification) Materia Case/Nut: Nicke pated Brass, Washer: Nicke pated Iron, surface: Heatresistant ABS Approva PRDCM: Approx. 6g PRDCM: Approx. 8g PRDCM: Approx. g Unit Weight PRDCML: Approx. g PRDCML: Approx. 66g PRDCML: Approx. 8g : The response frequency is the average vaue. The standard sensing is used and the width is set as times of the standard sensing, / of the sensing distance for the distance. Environment resistance is rated at no freezing or condensation. Dimensions PRDCM Series PRDCMD.8. PRDCM8D.8. (: mm) PRDCM8D. 9. PRDCM8D.8 0. M8 M8 PRDCM0D ø PRDCM0D ø M0. M0. D8

3 Long Distance Connector type Dimensions PRDCMT Series PRDCMT08D ø PRDCMTD PRDCMT8D PRDCMT0D PRDCML Series PRDCMLD PRDCML8D PRDCML0D ø M08 M0. M0. M8 PRDCMT08D ø PRDCMT8D PRDCMT8D PRDCML8D PRDCML8D 0 PRDCML0D ø M M8 M8 eectric r M0. M0. D9

4 Contro output diagram DC wire type DC wire type NPN output type PNP output type 0kΩ (brownback) Output votage (backbue) H L 0kΩ (brownback) Output votage (backbue) H L The number in a circe is pin no. of connector. Wiring diagram DC wire type(standard type) Normay Open() / Normay Cosed() Pin, are not used terminas. For DC wire type connector cabe, it is avaiabe to use with back wire(vdc) and bue wire(). NPN output type DC wire type PNP output type Pease fasten the ceat of connector not to shown the thread. (0.9 to 0.9N. m) DC wire type(iec standard type) Normay Open() Normay Cosed(), of type and, of type are not used terminas. The pin arrangement of connector appying IEC standard is being deveoped. Pease attach "I" at the end of the name of standard type for purchasing the IEC standard product. Ex)PRDCMTDOI The connector cabe for IEC standard is being deveoped. Pease attach "I' at the end of the name of standard type. Ex)CIDI, CLDI Pease fasten the vibration part with Tefon tape. Refer to the G6 page about IEC standard connector wires and specifications. D0

5 Long Distance Connector type Proper usage connections VDC eectric r < DC wire type > < DC wire type > When using DC wire type proximity, the oad must be connected otherwise interna components may be damaged. The oad can be connected to either wire. In case of the oad current is sma DC wire type R = I (Ω) Beeder resistor P = R (W) It may cause return faiure of oad by residua votage. If the oad current is under ma, pease make sure the residua votage is ess than the return votage of the oad by connecting a beeder resistor in parae with the oad as shown in the diagram. [ I:Action current of oad, R:Beeder resistance, P:Permissibe power] Pease make the current on proximity smaer than the return current of oad by connecting a beeder resistor in parae. W vaue of Beeder resistor shoud be bigger for proper heat dissipation. R = IoIoff (Ω) P = R (W) :, Io : Min. action current of proximity, Ioff : current of oad, P : Number of Beeder resistance watt [ ] Mutuainterference & Infuence by surrounding metas When severa proximity s are mounted cose to one another a mafunction of the may be caused due to mutua interference. Therefore, be sure to provide a minimum distance between the two s as beow chart indicates. Parae B A Face to Face When s are mounted on metaic, you must prevent the s from being affected by any metaic object except. Therefore, be sure to provide a minimum distance as beow chart indicates. Item Mode PRDCMT08 D PRDCMT08 D PRDCMT D PRDCML D PRDCM8 D PRDCML 8D ød PRDCM8 D PRDCML8 D PRDCM8 D PRDCML8 D m PRDCM8 D PRDCML8 D A B ød m 6 n n (: mm) PRDCM8 D PRDCML8 D D