RX-LS200. Adjustable Range Reflective Photoelectric Sensor. Detection of different colored objects at a certain distance. Hardly affected by color

Transcription

1 383 FIBER ASER PHOTOEECTRIC MICRO PHOTOEECTRIC AREA IGHT CURTAINS PRESSURE / FOW INUCTIVE PROXIMITY PARTICUAR USE SENSOR SIMPE UNITS MEASUREMENT STATIC CONTRO EVICES ENOSCOPE ASER MARKERS Adjustabe Range Refective Photoeectric RX-S Genera terms and conditions... F-17 Reated Information Gossary of terms... P.19~ etection of different coored objects at a certain distance seection guide...p.83~ Genera precautions... P.15 Conforming to EMC irective PNP output type avaiabe Ampifier Buit-in Te. 1 () Fax 1 () PC / TERMINAS HUMAN MACHINE INTERFACES ENERGY CONSUMPTION VISUAIZATION FA MACHINE VISION UV CURING Seection Guide Ampifier Buit-in Power Suppy Buit-in Ampifierseparated CX- EX-1 EX- EX-3 EX- CX- EQ-3 Hardy affected by coor The coor or size of the object does not affect its sensing performance. Robust Its robust encosure is made of die-cast zinc aoy. ENVIRONMENTA RESISTANCE Waterproof IP67 (IEC) The equipment on which the sensor is mounted can be washed without any probem. Note: However, take care that if it is exposed to water spashes during operation. It may detect a water drop itsef. Insusceptibe to dust The sensing performance is ess affected by dust as it does not depend on the incident ight intensity. ust Hardy affected by background The sensor does not detect the background beyond the set distance since it is of distance adjustabe type. However, changing the ange of the sensor is necessary when the background object has a specuar surface. BASIC PERFORMANCE High-speed response time: 1 ms It can be used on a high speed assemby ine. Background (specuar) Adjustabe Range & Fixed-focus Refective Type The sensing range for which the sensor detects an object is determined by the incident beam ange, regardess of the incident ight intensity. RX-S Receiving eement (-segment device) Receiving ens The sensing range can be changed according to the position of the ens. Sensing object CH Bussingen EQ-5 MQ-W RX-S Emitting E Emitting ens Sensing object Sensing range RX RT-61

2 Adjustabe Range Refective Photoeectric RX-S APPICATIONS etecting ids of cups Cut a hoe on the conveyor ine so that the beam cannot be refected without a id. Safekeeping at parking garage ORER GUIE Type Appearance Sensing range Mode No. Output NPN output RX-S NPN open-coector transistor 5 to mm to in PNP output RX-S-P PNP open-coector transistor Te. 1 () Fax 1 () m cabe ength type 5 m 16. ft cabe ength type (standard: 3 m 9.83 ft) is aso avaiabe for NPN output type. Mode No.: RX-S-C5 Accessory MS-RX-1 ( mounting bracket) Two M (ength 1.63 in) hexagon-socket-head bots are attached. CH Bussingen esignation Mode No. escription Narrow-view sit mask OS-RX-1 OS-RX- OS-RX-3 Sit size.5 mm in 3. mm in 3.5 mm in The sensing view is narrowed ateray so that the effect of the object s surroundings is reduced. Narrow-view sit mask OS-RX- PT-RX5 PT-RX1 ength 5 mm in Cabe is protected from externa forces. 1, mm in It does not rust as it is made of stainess stee. PT-RX5 PT-RX1

3 385 Adjustabe Range Refective Photoeectric RX-S FIBER ASER Ampifierseparated PHOTO- EECTRIC MICRO PHOTO- EECTRIC AREA IGHT CURTAINS PRESSURE / FOW INUCTIVE PROXIMITY PARTICUAR USE SENSOR SIMPE UNITS MEASURE- MENT STATIC CONTRO EVICES ENOSCOPE ASER MARKERS PC / TERMINAS HUMAN MACHINE INTERFACES ENERGY CONSUMPTION VISUAIZATION FA MACHINE VISION UV CURING Seection Guide Ampifier Buit-in Power Suppy Buit-in CX- EX-1 EX- EX-3 EX- CX- EQ-3 EQ-5 MQ-W RX-S RX RT-61 SPECIFICATIONS Adjustabe range refective Type NPN output type PNP output type Item Mode No. RX-S RX-S-P Sensing range 5 to mm to in with white non-gossy (5 5 mm in) Hysteresis 1 % or ess of operation distance with white non-gossy (5 5 mm in) Repeatabiity Aong sensing axis: 1 mm.39 in or ess, Perpendicuar to sensing axis:.5 mm. in or ess Suppy votage 1 to V C ±1 % Rippe P-P 1 % or ess Current consumption ma or ess Output NPN open-coector transistor Maximum sink current: 1 ma Appied votage: 3 V C or ess (between output and V) Residua votage: 1.5 V or ess (at 1 ma sink current). V or ess (at 16 ma sink current) PNP open-coector transistor Maximum source current: 1 ma Appied votage: 3 V C or ess (between output and V) Residua votage: 1 V or ess (at 1 ma source current). V or ess (at 16 ma source current) Utiization category C-1 or C-13 Output operation Switchabe either ight-on or ark-on Short-circuit protection Incorporated Response time 1 ms or ess Operation indicator Red E (ights up when the output is ON) Stabiity indicator Green E (ights up under stabe ight received condition or stabe dark condition) istance adjuster -turn mechanica adjuster Poution degree 3 (Industria environment) Protection IP67 (IEC) Ambient temperature 5 to 6 C 13 to 1 F (No dew condensation or icing aowed), Storage: 3 to 7 C to 158 F Ambient humidity to 85 % RH, Storage: to 85 % RH Ambient iuminance Incandescent ight: 3,5 x at the ight-receiving face EMC EN Votage withstandabiity 1, V AC for one min. between a suppy terminas connected together and encosure Insuation resistance MΩ, or more, with 5 V C megger between a suppy terminas connected together and encosure Vibration resistance 1 to 5 Hz frequency, 1.5 mm.59 in ampitude (1 G max.) in X, Y and Z directions for two hours each Shock resistance 5 m/s acceeration (approx. 5 G) in X, Y and Z directions for three times each Emitting eement Infrared E (peak emission waveength: 88 nm.mi, moduated) Materia Encosure: ie-cast zinc aoy, Indicator cover: Poyethersuphone, ens: Poycarbonate Cabe.15 mm 3-core oi, heat and cod resistant cabtyre cabe, 3 m 9.83 ft ong Cabe extension Extension up to tota 1 m 38.8 ft is possibe with.3 mm, or more, cabe. Weight Net weight: 85 g approx. Accessories MS-RX-1 ( mounting bracket): 1 set, Adjusting screwdriver: 1 pc. Note: Where measurement conditions have not been specified precisey, the conditions used were an ambient temperature of 3 C 73. F. Environmenta resistance I/O CIRCUIT AN WIRING IAGRAMS RX-S I/O circuit diagram circuit Z Tr Interna circuit Coor code (Brown) V (Back) Output (Bue) V 1 ma max. Users circuit oad Symbos : Reverse suppy poarity protection diode Z : Surge absorption zener diode Tr : NPN output transistor 1 to V C ±1 % Wiring diagram Brown Back Bue oad NPN output type 1 to V C ±1 % Te. 1 () Fax 1 () CH Bussingen

4 Adjustabe Range Refective Photoeectric RX-S 386 I/O CIRCUIT AN WIRING IAGRAMS RX-S-P I/O circuit diagram circuit Tr Z Coor code (Brown) V 1 ma max. (Back) Output (Note) oad (Bue) V 1 to V C ±1 % Wiring diagram Brown Back Bue oad PNP output type 1 to V C ±1 % Interna circuit Users circuit Note: The output does not incorporate a short-circuit protection circuit. o not connect it directy to a power suppy or a capacitive oad. Symbos : Reverse suppy poarity protection diode Z : Surge absorption zener diode Tr : PNP output transistor SENSING CHARACTERISTICS (TYPICA) Sensing fieds Setting distance: mm in (Horizonta) mm in Setting distance: 15 mm 5.96 in with sit mask (Horizonta) Gray nongossy mm.17 in eft Center Right mm in 5.5 mm.17 in OS-RX-1 OS-RX- OS-RX eft Center Right Setting distance: mm in (Vertica) mm in.36 in Up Center own Setting distance: 15 mm 5.96 in with sit mask (Vertica) Common for OS-RX-1 OS-RX- OS-RX mm in.36 in Gray nongossy Up Center own Correation between sensing object size and sensing range Sensing range (mm in) White non-gossy Gray non-gossy a a mm in White non-gossy Gray non-gossy White non-gossy side ength a (mm in) mm in 1 mm in Setting distance: 15 mm 5.96 in (Horizonta) mm in 5.5 mm.17 in These curves show the characteristics with the maximum sensing range set to 1 mm in, mm in, each, with white non-gossy (5 5 mm in). Gray non-gossy eft Center Right.157 Setting distance: 15 mm 5.96 in (Vertica) Emitted beam istance (mm in) Gray nongossy 5 5 mm in.36 in Up Center own ø7.5 mm ø.95 in ø6.5 mm ø.56 in ø ø.36 in ø5 mm ø.197 in Te. 1 () Fax 1 () CH Bussingen

5 Adjustabe Range Refective Photoeectric RX-S PRECAUTIONS FOR PROPER USE istance adjustment Adjusters Pointer It shows how much the distance adjuster is rotated. Operation indicator (Red) ights up when the output is ON. SENS RX-S MOE istance adjuster (-turn) The sensing range increases as it is turned cockwise. Operation mode switch : ight-on : ark-on (Turn the switch fuy.) Stabiity indicator (Green) ights up under stabe ight received condition or stabe dark condition. Adjusting procedure Refer to Genera precautions. Step escription istance adjuster 1 3 Turn the distance adjuster fuy countercockwise to the minimum sensing range position (5 mm in approx.). (o not turn excessivey.) Pace an object at the required distance from the sensor, turn the distance adjuster graduay cockwise, and find out point A where the sensor changes to the ight received condition. Remove the object, turn the distance adjuster further cockwise, and find out point B where the sensor changes to the ight received condition again with ony the background. When the sensor does not go to the ight received condition even if the adjuster is fuy turned cockwise, point B is this extreme point. The optimum position to staby detect objects is the center point between A and B. B Turn A Optimum position Te. 1 () Fax 1 () IMENSIONS (Unit: mm in) RX-S RX-S-P Beamreceiving part Beamemitting part MS-RX Operation mode switch istance adjuster (-turn) Pointer Indicator cover (.5) (.98) R1 R M.7.8 thru-hoe threads Stabiity indicator (Green) Cover-fixing screw Operation indicator (Red) ø3.7ø.16 cabe, 3 m 9.83 ft ong M Materia: Cod roed carbon stee (SPCC)..173 t t.79 Two M (ength 1.63 in) hexagon-sockethead bots are attached. <When a sensing object is approaching / moving away from the sensor> Foow ony steps 1 and respectivey. Since the sensing point may change depending on the sensing object, be sure to check the operation with the actua sensing object. The CA data in the dimensions can be downoaded from our website. PT-RX5 PT-RX1 9. ø1 ø.39 (Brass) Interna thread M8.75.3,.157 deep ength Assemby dimensions ø7 ø.76 spira tube [Stainess stee (SUS3)] (.5) (.98) Mode No. ength PT-RX PT-RX1 1, (Optiona) ø18 ø.79 ø5 ø M thread [Brass (C36) (Nicke pated)] mounting bracket (Accessory) CH Bussingen