DVI to VGA Converter DDAP

Transcription

1 User s Guide DVI to VGA Converter DDAP Thank you for purchasing DDAP DDAP, This unique DVI Converter transports your DVI signal to analog graphic signal so that display devices without DVI input can be connected to your PC and notebook with DVI output easily and conveniently.

2 User s Guide Check your package Installation Check the package and make sure you have everything: Contents (1) DDAP DVI to VGA Converter (2) +5V DC Power supply x 1pc (3) User s Guide If any of these items are missing in your package, contact OPHIT or your supplier for support. Installation Steps: 1. Connect the VGA Video display to DDAP output port. 2. Connect the included +5V DC power supply to DDAP DC +5V Power VGA Output NOTE: Package content may differ if you have placed a special order or placed order from anywhere other than OPHIT CO., LTD. OPHIT CO., LTD. reserves the right to make changes without further notice to a product described herein to improve reliability, design, packaging or function. 3. Connect the DVI Video source to DDAP input port. DVI Input

3 User s Guide EDID Switch Setting Application EDID Setting: Mode is set on ETC when shipping Resolution Description 1 XGA Internal EDID Set to 1024 x 60Hz Mode. 2 SXGA Internal EDID Set to 1280 x 60Hz Mode. 3 SXGA+ Internal EDID Set to 1400 x 60Hz Mode. 4 WSXGA+ Internal EDID Set to 1680 x 60Hz Mode. 5 UXGA Internal EDID Set to 1600 x 60Hz Mode P(HD) Internal EDID Set to 1280 x 60Hz Mode P(FULL HD) Internal EDID Set to 1920 x 60Hz Mode. 8 ETC Mode that reads Analog EDID from monitor that s connected to VGA port and transfers to Digital EDID. Use setting switch to set resolutions after trying DDAP on ETC mode, if DDAP operates normally on ETC mode you don t have to change EDID setting. 1. Disconnect power adapter and cables from DDAP before setting EDID switch. 2. Set EDID switch as shown on back of DDAP. 3. When EDID setting is ready connect power adapter and cables. 4. On ETC mode there can be compatibility issues, in this case setting one of No.1~No.7 is recommended.

4 Warranty We, OPHIT hereby warrant the final purchase of our product as follows. In the case of troubles on our products, please contact the shop purchased. One year limited warranty Our customers have right to be served with free of charge when there is trouble in this product during 1(one) year from the day purchased. Out of warranty services When you request services (in the case of non manufacturing defects but the troubles by misusage), may served with charge as follows. - Defects of products caused by accident, disaster. - Damages of products caused by the customer s carelessness or mistaken application. - Damages of products caused by the application of the parts or products not supplied or sold by our company. - Damages of products and related defects caused by not our staff or the men or group not nominated by us for services. The interchanged parts and products for maintenance services shall be replaced as new parts and products operating normally, and the inter-changed parts and products shall be subjected to our company.

5 RMA Request Form RMA No.: Customer Name: Company Name: Model Name: Serial No: Return Date: Phone: Place of Purchase: Address: (For RMA Return) RMA details: (Please describe RMA status, application used and failure symptom)

6 Technical and Sales Support KOREA HQ OPHIT CO., LTD. 3F Suntechnovil, 5-27 Mangpo-Dong, Youngtong-Gu, Suwon-City, Kyunggi-Do, Korea ( ) Tel: + 82 (0) Fax: + 82 (0) jhchoi35@ophit.com / sinolee@ophit.com USA Foreseeson Custom Display 2210E, Winston Road Anaheim, CA USA Tel: Fax : sshin@foreseesonusa.com Regional Office UK Foreseeson UK Ltd Unit 2Kingsmill Business Park, Chapel Mill Rd. Kingston Upon Thames, Surrey; KT1 3GZ; UK Tel : +44 (0) Fax : +44(0) jasonkwon@foreseeson.de Europe Foreseeson GmbH Benzstr. 9, Bad Homburg Germany Tel.: +49 (0) Fax: +49 (0) christianelfert@foreseeson.de 2012 OPHIT CO., LTD. All rights reserved. Printed and designed in Korea REV. 1.0