IndustryPack Modules

Transcription

1 IndustryPack Modules Data Sheets of TEWS IP Modules and Carrier

2 About TEWS TECHNOLOGIES TEWS TECHNOLOGIES is a leading solutions provider of embedded I/O and CPU products based on open architecture standards such as IndustryPack, PMC, XMC, CompactPCI, PCI, PCI Express, PCI Express Mini Card, VMEbus, PC104+, AMC, MicroTCA, and FMC. TEWS has more than 40 years of experience designing and building turnkey embedded interface solutions using the philosophy to listen and respond to our customers needs. Using this customer first approach, TEWS has developed a large number of standard and custom products for applications in industrial control, telecommunication infrastructure, medical equipment, traffic control and COTS. TEWS line of embedded I/O solutions is available worldwide through a global network of distributors. Software support Software support is a critical and defining component of the TEWS I/O product offering. Our modular hardware designs are coupled with extensive software drivers and support for most major realtime and server operating systems such as VxWorks, Windows, Integrity, Linux, and QNX. Supported CPU architectures are Intel, PowerPC and 68k (for IndustryPack only). For IndustryPack carriers and modules, TEWS has developed a layered driver concept that includes both a carrier driver layer and an IP module driver layer. All TEWS IndustryPack carriers are supported directly by the carrier driver, and a generic driver is included for integration of third party products. A key element of our software is our support staff. All TEWS support engineers are professionally trained to ensure in-depth support for software drivers and integration.

3 Quality Assurance / Warranty TEWS operates three subsidiaries to meet global demand for pre and post sales support, reduced development time, long term product availability, and complete product lifecycle management. TEWS is committed to continuously improving the quality of our products and services. As a reflection of our commitment to quality, TEWS has implemented and received ISO9001:2008 certification. RoHS / WEEE Compliance TEWS TECHNOLOGIES believes in conducting business in a manner that respects the environment and consequently has embraced the RoHS regulations of the European Community. Non-compliant products will continue to be available for all applications which are exempt from the RoHS directives and have a continuing requirement for leaded solder. All TEWS products feature a five-year limited warranty.

4 + IndustryPack Modules IndustryPack, also known as IP Modules or IPack, exist in single size (1.8" x 3.9") and double size (3.6" x 3.9") versions. The modules reside on carriers and provide cost effective I/O solutions due to their small construction and form-factor features. TEWS TECHNOLOGIES offers an attractive and wide range of IP modules for industrial process control, medical equipment, traffic control, telecommunication, and COTS applications. We supply off-the-shelf software drivers and superior support for all major operating systems. In addition, we provide engineering kids with detailed manuals, schematics and data sheets for each IP module. To help facilitate system integration, we also offer transition modules, cable kits and cable adapters. Select from our wide range of TEWS TECHNOLOGIES products for highspeed and high-resolution A/D, D/A, digital I/O, motion control, FPGA, and serial communication functions. Note that nearly all TEWS modules are galvanically isolated to protect your system. If you wish to inquire about custom IndustryPack designs, please contact TEWS directly at our offices in Germany or the United States. TEWS works closely with OEM and government customers to deliver accelerated time to market, long-term product availability and comprehensive product lifecycle management -- from the design stage through manufacturing, testing and beyond to post-sales support. In addition to our well known IP modules, we offer a complete line of PMC, XMC, CompactPCI, PCI, PCI Express, PCI Express Mini Card, VMEbus, PC104+, AMC, MicroTCA, and numerous FMC modules off-the-shelf. All TEWS modules feature a five-year limited warranty, and many are offered standard in extended temperature (-40 C to +85 C). Software drivers for VxWorks, Linux, QNX, and Windows are available. For more information go to

5 TIP Channel Absolute Encoder Interface (SSI) Application Information The TIP114 is an IndustryPack compatible module for motion control applications. The TIP114 offers ten independent SSI interfaces with programmable clock rates from 1µs to 15µs and programmable data bits from 1 bit to 32 bit. The position feedback is provided by an absolute encoder with a synchronous serial interface (SSI) and a corresponding 32 bit (maximum) shift register at the IP. The level of the encoder signals is RS422. The data inputs are galvanically isolated by high speed optocouplers. Each SSI channel can handle a data stream which is encoded in Binary- or in Gray-Code, without or with parity as well as with even or odd parity. Software support (TIP114-SW-xx) is available for different operating systems. Technical Information Interface according to IndustryPack specification Single Size IndustryPack 10 Channel absolute encoder interface with isolated serial SSI inputs SSI clock rate programmable from 1µs to 15µs SSI data programmable from 1 bit to 32 bit Fault protected differential clock drivers with additional TVS array EIA-422 encoder inputs galvanically isolated by high speed optocouplers Operating temperature -40 C to +85 C MTBF (MIL-HDBK217F/FN2 G B 20 C) TIP114-10R: h keeps the right to change technical specification without further notice

6 Order Information RoHS Compliant TIP114-10R 10 Channel Absolute Encoder (SSI) Interface For the availability of non-rohs compliant (leaded solder) products please contact TEWS. Documentation TIP114-DOC Software TIP114-SW-42 TIP114-SW-65 TIP114-SW-82 TIP114-SW-95 User Manual VxWorks Software Support (Legacy and VxBus-Enabled Software Support) Windows Software Support Linux Software Support QNX Software Support For other operating systems please contact TEWS. keeps the right to change technical specification without further notice

7 TIP115 5 Channel SSI Interface with Listen Only Mode Application Information The TIP115 is an IndustryPack compatible module for motion control applications. The TIP115 offers five independent channels. Each of these channels can be operated as a standard SSI interface controller or in a Listen only mode. The standard SSI interface controller outputs a clock burst to the absolute encoder and receives the returned positional data. The SSI interface controller operates with a programmable clock rate from 1µs to 15µs and programmable data word length from 1 bit to 32 bit. In Listen only mode the channel listens to an existing SSI interface to observe its data transfer. It takes both the SSI clock and data as inputs. In Listen only mode the channel also has a programmable data word length from 1 bit to 32 bit; the SSI clock rate of the observed SSI interface can be in the range of 1µs to 15µs. In both modes the data word can be encoded in Binary- or in Gray-Code and with odd, even or no parity. The data inputs are galvanically isolated by high speed optocouplers. The level of the input and output signals is RS422. Software support (TIP115-SW-xx) is available for different operating systems. Technical Information Interface according to IndustryPack specification Single Size IndustryPack 5 Channel synchronous serial interface (SSI) with two modes: - Standard SSI Interface Controller - Listen only Mode SSI data word length programmable from 1 bit to 32 bit Data word encoding: Binary- or Gray-Code Parity: Odd, even or without SSI clock rate: 1µs 15µs EIA-422 encoder inputs galvanically isolated by high speed optocouplers Fault protected differential clock drivers with additional TVS array Operating temperature -40 C to +85 C MTBF (MIL-HDBK217F/FN2 G B 20 C) TIP115-10R: h keeps the right to change technical specification without further notice

8 Order Information RoHS Compliant TIP115-10R 5 Channel Absolute Encoder (SSI) Interface, supports 'Listen Only' Mode For the availability of non-rohs compliant (leaded solder) products please contact TEWS. Documentation TIP115-DOC Software TIP115-SW-42 TIP115-SW-65 TIP115-SW-82 TIP115-SW-95 User Manual VxWorks Software Support (Legacy and VxBus-Enabled Software Support) Windows Software Support Linux Software Support QNX Software Support For other operating systems please contact TEWS. keeps the right to change technical specification without further notice

9 TIP116 4 Channel Quadrature / General Purpose Counter Application Information The TIP116 IndustryPack compatible module is primarily designed for motion control applications, but it is also applicable as general purpose counter. The TIP116 offers four channel quadrature / general purpose counter. Each channel consists of a 32 bit programmable counter, a 32 bit preload register, a 32 bit compare register and a 32 bit output latch. The 32 bit counter can be programmed for quadrature, up-/down or direction count. In quadrature count mode the counter is programmable for single, double and quadruple analysis of the encoder signals. Two special count modes are available, a cycling 'Divide-by-N' mode and a 'Single- Cycle' mode. Additionally four control modes are available via the control input. The control input can be programmed to load, latch or reset the counter or it can be used as a gate for the counter clock. The level of the three input signals per channel can be RS422 or TTL. The input signals pass a digital filter for noise suppression before they are fed into the counter. The TIP116 also provides a RS422 clock output. The clock frequency is programmable to 1, 2, 4 or 8 MHz. A 16 bit down-counter with preload register allows timing intervals of up to 65ms. It can be used as reference timer for closed loop applications. Software support (TIP116-SW-xx) is available for different operating systems. Technical Information Interface according to IndustryPack specification Identification-PROM supports auto-configuration Single Size IndustryPack Four 32 bit counter, each with: - 32 bit preload register - 32 bit comparator register - 32 bit latched output register - Up/down, direction or quadrature count - 1x, 2x or 4x resolution multiplier (quadrature count) - Divide-by-N, Single Cycle counting modes - Programmable control input with 4 additional control modes Vectored interrupt DC to 4 MHz count frequency Inputs TTL/RS422 compatible Programmable RS422 clock output 16 bit down-counter with preload Operating temperature -40 C to +85 C keeps the right to change technical specification without further notice

10 Order Information RoHS Compliant TIP116-10R 4 Channel 32bit Quadrature / General Purpose Counter, RS422/TTL inputs, 16bit timer For the availability of non-rohs compliant (leaded solder) products please contact TEWS. Documentation TIP116-DOC Software TIP116-SW-42 TIP116-SW-65 TIP116-SW-82 TIP116-SW-95 User Manual VxWorks Software Support (Legacy and VxBus-Enabled Software Support) Windows Software Support Linux Software Support QNX Software Support For other operating systems please contact TEWS. keeps the right to change technical specification without further notice

11 TIP119 6 Channel 16 bit Quadrature Decoder Counter Application Information The TIP119 is an IndustryPack compatible module providing six channels of quadrature decoder inputs. Each channel has a dedicated 16 bit wide quadrature decoder counter. The input signals can be of RS422A and RS423A level and pass a digital filter for noise suppression before they are fed into the counter. An interrupt can be generated at counter over- or underflow or on assertion of the index input. An 8 bit interrupt vector is supported. Software support (TIP119-SW-xx) is available for different operating systems. Technical Information Interface according to IndustryPack specification Single Size IndustryPack 6 Channels 16 bit quadrature counter Vectored interrupt Inputs RS422/RS423 compatible 1.3 MHz maximum tracking rate 220 ohm input impedance Operating temperature 0 C to +70 C keeps the right to change technical specification without further notice

12 Order Information RoHS Compliant TIP119-10R 6 Channel 16bit Quadrature Counter, RS422 inputs For the availability of non-rohs compliant (leaded solder) products please contact TEWS. Documentation TIP119-DOC Software TIP119-SW-42 TIP119-SW-65 TIP119-SW-82 TIP119-SW-95 User Manual VxWorks Software Support (Legacy and VxBus-Enabled Software Support) Windows Software Support Linux Software Support QNX Software Support For other operating systems please contact TEWS. keeps the right to change technical specification without further notice

13 TIP150 1 or 2 Channel Synchro / Resolver-To-Digital-Converter Application Information The TIP150 is an IndustryPack compatible module providing one or two channels of a tracking synchro / resolver-to-digital converter. The resolution programming allows selection of 10, 12, 14 or 16 bit conversion. This combines the high tracking rate of a 10 bit converter with the precision of a 16 bit converter. Two converter accuracies are available: TIP150-x0R with 4 arcmin +1LSB and TIP150-x1R with 2 arcmin +1LSB. The customer specific signal conditioning adapter (TIP150-Ay-xx) per channel provides an easy interface to the different types of synchro and resolvers. For highest accuracy the on board reference oscillator of the signal conditioning adapter TIP150-A2-xx and TIP150-A4-xx automatically compensates the phase error generated by the synchro / resolver. Software support (TIP150-SW-xx) is available for different operating systems. Technical Information Interface according to IndustryPack specification Identification-PROM supports auto-configuration Single Size IndustryPack One or two channels Tracking Synchro/Resolver-To- Digital-Converter Programmable resolution 10, 12, 14 or 16 bits Adjustable bandwidth Converter accuracy 4 or 2 arcmin + 1LSB Velocity output and built-in-test output Individual input voltage for each channel by signal conditioning adapter Optional reference oscillator for each channel on signal conditioning adapter Oscillator frequency factory selectable 2-20KHz Oscillator amplitude 11.8Vrms maximum Resolver phase error compensation keeps the right to change technical specification without further notice. Issue

14 Order Information RoHS Compliant TIP150-30R 1 x Synchro / Resolver Interface, 4 arcmin, TIP150-Ay-xx required TIP150-31R 1 x Synchro / Resolver Interface, 2 arcmin, TIP150-Ay-xx required TIP150-40R 2 x Synchro / Resolver Interface, 4 arcmin, TIP150-Ay-xx per channel required TIP150-41R 2 x Synchro / Resolver Interface, 2 arcmin, TIP150-Ay-xx per channel required TIP150-A1-xxR Resolver Signal Conditioning Adapter TIP150-A2-xxR Resolver Signal Conditioning Adapter with Reference Oscillator For the availability of non-rohs compliant (leaded solder) products please contact TEWS. Non-RoHS compliant TIP150-A3-xx High Precision Synchro / Resolver Signal Conditioning Adapter TIP150-A4-xx High Precision Synchro / Resolver Signal Conditioning Adapter with Reference Oscillator Documentation TIP150-DOC Software TIP150-SW-42 TIP150-SW-65 TIP150-SW-82 TIP150-SW-95 User Manual VxWorks Software Support (Legacy and VxBus-Enabled Software Support) Windows Software Support Linux Software Support QNX Software Support For other operating systems please contact TEWS. keeps the right to change technical specification without further notice. Issue

15 TIP255 2 Mbytes SRAM Memory with Battery Backup Application Information The TIP255 is an IndustryPack compatible module that offers an easy and reliable way to implement 2 Mbytes of SRAM memory with battery backup. The TIP255 is ideal for holding configuration parameter and data logging applications. Four 512 Kbit x eight low power SRAM devices are used to provide two banks of 1 Mbyte (16 bit wide) SRAM memory. Technical Information Interface according to IndustryPack specification Identification-PROM supports auto-configuration Single Size IndustryPack 2 Mbytes of SRAM Memory Organized in 2 banks of 1 Mbyte (16 bit wide) SRAM chip: 4 devices 512 Kbit x 8, 70ns, TSOP-2 package, low power Non-volatile controller converts SRAM into nonvolatile memory On board battery holder with lithium battery (type CR2430, 285mAh) A non-volatile controller together with the on board lithium battery converts the SRAM into non-volatile memory. The battery status can be monitored by the control and status register. Additionally an interrupt can be generated on battery low. Accesses to the TIP255 SRAM memory occur within the IP memory space. The IP I/O space holds the control and status register and the interrupt vector register. Automatically switches to battery backup supply when Vcc supply drops Interrupt support on battery low Battery life time 8 years +25 C Wait states: no wait states Power requirements: +5V only, on board +3.3V generation Operating temperature 0 C to +70 C keeps the right to change technical specification without further notice. Issue

16 Order Information RoHS Compliant TIP255-10R 2 MB of SRAM Memory with Battery Backup For the availability of non-rohs compliant (leaded solder) products please contact TEWS. Documentation TIP255-DOC User Manual keeps the right to change technical specification without further notice. Issue

17 TIP Channels of Isolated 12 bit A/D Conversion Application Information The TIP500 is an IndustryPack compatible module with 16 single-ended or 8 differential channels of isolated 12 bit A/D conversion. The data acquisition and conversion time is up to 10µs without channel / gain change and up to 12.5µs with channel / gain change. The input multiplexer offers analog overvoltage protection of up to 70 Vpp. A programmable gain amplifier allows gains of 1, 2, 5, 10 or 1, 2, 4, 8. The full-scale input range is +/-10V for the TIP500-1xR and 0-10V for the TIP500-2xR. Technical Information Interface according to IndustryPack specification Identification-PROM supports auto-configuration Single Size IndustryPack 16 single-ended or 8 differential channels of isolated 12 bit A/D conversion ESD protected input multiplexer Programmable gain amplifier, gain 1, 2, 5, 10 or gain 1, 2, 4, 8 The isolated ADC, programmable gain amplifier and multiplexer are powered by an on board DC/DC converter. An interrupt can be generated at end-of-conversion supporting an 8 bit vector. Each TIP500 is factory calibrated. The calibration information is stored in the Identification-PROM unique to each IP. Software support (TIP500-SW-xx) for different operating systems is available. 12 bit A/D converter with internal S/H and reference Full-scale input range +/- 10 V or 0-10V (gain = 1) Interrupt capability at end-of-conversion Factory calibrated, calibration information in Identification-PROM unique to each IP Operating temperature 40 C to +85 C keeps the right to change technical specification without further notice. Issue

18 Order Information RoHS Compliant TIP500-10R 16 Channel Isolated Multiplexed 12 bit A/D, gain 1,2,5,10, +/-10V TIP500-11R 16 Channel Isolated Multiplexed 12 bit A/D, gain 1,2,4,8, +/-10V TIP500-20R 16 Channel Isolated Multiplexed 12 bit A/D, gain 1,2,5,10, 0-10V TIP500-21R 16 Channel Isolated Multiplexed 12 bit A/D, gain 1,2,4,8, 0-10V For the availability of non-rohs compliant (leaded solder) products please contact TEWS. Documentation TIP500-DOC Software TIP500-SW-42 TIP500-SW-65 TIP500-SW-82 TIP500-SW-95 User Manual VxWorks Software Support (Legacy and VxBus-Enabled Software Support) Windows Software Support Linux Software Support QNX Software Support For operating systems please contact TEWS. keeps the right to change technical specification without further notice. Issue

19 TIP Channels of Isolated 16 bit A/D Conversion Application Information The TIP501 is an IndustryPack compatible module providing 16 single-ended or 8 differential channels of isolated 16 bit A/D conversion. The data acquisition and conversion time is up to 12µs without channel / gain change and up to 14.5µs with channel / gain change. The input multiplexer offers analog overvoltage protection of up to 70Vpp. A programmable gain amplifier allows gains of 1, 2, 5, 10 or 1, 2, 4, 8. The full-scale input range is +/-10V for the TIP501-1xR and 0-10V for the TIP501-2xR. The isolated ADC, programmable gain amplifier and multiplexer are powered by an on board DC/DC converter. An interrupt can be generated at end-of-conversion supporting an 8 bit vector. Each TIP501 is factory calibrated. The calibration information is stored in the Identification-PROM unique to each IP. Software Support (TIP501-SW-xx) for different operating systems is available. Technical Information Interface according to IndustryPack specification Identification-PROM supports auto-configuration Single Size IndustryPack 16 single-ended or 8 differential channels of isolated 16 bit A/D conversion ESD protected input multiplexer Programmable gain amplifier, gain 1, 2, 5, 10 or gain 1, 2, 4, 8 16 bit A/D converter with internal S/H and reference Full-scale input range +/- 10 V or 0-10V (gain = 1) Interrupt capability at end-of-conversion Factory calibrated, calibration information in Identification-PROM unique to each IP Operating temperature 40 C to +85 C keeps the right to change technical specification without further notice. Issue

20 Order Information RoHS Compliant TIP501-10R 16 Channel Isolated Multiplexed 16 bit A/D, gain 1,2,5,10, +/-10V TIP501-11R 16 Channel Isolated Multiplexed 16 bit A/D, gain 1,2,4,8, +/-10V TIP501-20R 16 Channel Isolated Multiplexed 16 bit A/D, gain 1,2,5,10, 0-10V TIP501-21R 16 Channel Isolated Multiplexed 16 bit A/D, gain 1,2,4,8, 0-10V For the availability of non-rohs compliant (leaded solder) products please contact TEWS. Documentation TIP501-DOC Software TIP501-SW-42 TIP501-SW-65 TIP501-SW-82 TIP501-SW-95 User Manual VxWorks Software Support (Legacy and VxBus-Enabled Software Support) Windows Software Support Linux Software Support QNX Software Support For operating systems please contact TEWS. keeps the right to change technical specification without further notice. Issue

21 TIP550 8 (4) Channels of Isolated 12 bit D/A Conversion Application Information The TIP550 is an IndustryPack compatible module and provides 8 or 4 channels of isolated 12 bit analog outputs. The settling time to 0.01% is 13µs typical. The programmable output voltage range is +/-10V or 0-10V selectable by jumper. The isolated DAC and the output buffer are powered by an on board DC/DC converter. Each TIP550 is factory calibrated. The calibration information is stored in the Identification-PROM unique to each IP. Software Support (TIP550-SW-xx) for different operating systems is available. Technical Information Interface according to IndustryPack specification Identification-PROM supports auto-configuration Single Size IndustryPack 8 (4) channels of isolated 12 bit analog output Full-scale output range +/-10 V or 0-10V selectable by jumper Factory calibrated, calibration information in Identification-PROM unique to each IP Operating temperature -40 C to +85 C keeps the right to change technical specification without further notice. Issue

22 Order Information RoHS Compliant TIP550-10R 8 Channel Isolated 12 bit D/A, +/- 10V or 0-10V TIP550-11R 4 Channel Isolated 12 bit D/A, +/- 10V or 0-10V For the availability of non-rohs compliant (leaded solder) products please contact TEWS. Documentation TIP550-DOC Software TIP550-SW-42 TIP550-SW-65 TIP550-SW-82 TIP550-SW-95 User Manual VxWorks Software Support (Legacy and VxBus-Enabled Software Support) Windows Software Support Linux Software Support QNX Software Support For operating systems please contact TEWS. keeps the right to change technical specification without further notice. Issue

23 TIP551 4 Channels of Isolated 16 bit D/A Conversion Application Information The TIP551 is an IndustryPack compatible module and offers 4 channels of isolated 16 bit analog outputs. Settling time to 0.003% is 10µs typical. The programmable output voltage range is +/-10V or 0-10V selectable by jumper. The DAC clears to 0V in both unipolar and bipolar output. The isolated DAC and the output buffer are powered by an on board DC/DC converter. Each TIP551 is factory calibrated. The calibration information is stored in the Identification-PROM unique to each IP. Software Support (TIP551-SW-xx) for different operating systems is available. Technical Information Interface according to IndustryPack specification Identification-PROM supports auto-configuration Single Size IndustryPack 4 channels of isolated 16 bit analog output Full-scale output range +/-10 V or 0-10V selectable by jumper Factory calibrated, calibration information in Identification-PROM unique to each IP Operating temperature -40 C to +85 C keeps the right to change technical specification without further notice. Issue

24 Order Information RoHS Compliant TIP551-10R 4 Channel Isolated 16 bit D/A, +/- 10V or 0-10V For the availability of non-rohs compliant (leaded solder) products please contact TEWS. Documentation TIP551-DOC Software TIP551-SW-42 TIP551-SW-65 TIP551-SW-82 TIP551-SW-95 User Manual VxWorks Software Support (Legacy and VxBus-Enabled Software Support) Windows Software Support Linux Software Support QNX Software Support For operating systems please contact TEWS. keeps the right to change technical specification without further notice. Issue

25 TIP Channel multiplexed isolated 12 bit ADC / 8 Channel isolated 12 bit DAC Application Information The TIP570 is an IndustryPack compatible module with an optically isolated 16 channel multiplexed 12 bit ADC and an optically isolated 8 channel 12 bit DAC. The ADC can be software configured to operate as 16 input channels in single-ended mode or 8 input channels in differential mode. The ADC input multiplexer is overvoltage protected up to 70Vpp. A programmable gain amplifier supports gains of 1, 2, 5, 10 (TIP570-10R) or gains of 1, 2, 4, 8 (TIP570-11R). The full-scale input voltage range is +/-10V. The data acquisition and conversion time is modedependent: up to 1µs typical without channel or gain change, up to 12.5µs typical with channel or gain change. The 8 channel DAC full-scale output voltage is +/-10V. The output amplifier is capable of sinking and sourcing 2mA for each DAC channel (1000pF load). The output voltage settles to 12 bits in 5µs typical. Each TIP570 is factory calibrated. The calibration data is stored in the EEPROM unique to each IP. Software support (TIP570-SW-xx) for different operating systems is available. Technical Information Interface according to IndustryPack specification Identification-PROM supports auto-configura tion Single Size IndustryPack 16 channel multiplexed isolated 12 bit analog input Input voltage range: +/-10V Input gains: 1, 2, 5, 10 or 1, 2, 4, 8 8 channel isolated 12 bit analog output Output voltage range: +/-10V Output sources and sinks 2mA / 1000pF load Factory calibrated, calibration information in Identification-PROM unique to each IP Operating temperature -40 C to +85 C keeps the right to change technical specification without further notice. Issue

26 Order Information RoHS Compliant TIP570-10R 16 Ch. Isolated 12 bit A/D, gain 1,2,5,10, +/-10V, 8 Ch. Isolated 12 bit DAC, +/-10V TIP570-11R 16 Ch. Isolated 12 bit A/D, gain 1,2,4,8, +/-10V, 8 Ch. Isolated 12 bit DAC, +/-10V For the availability of non-rohs compliant (leaded solder) products please contact TEWS. Documentation TIP570-DOC Software TIP570-SW-42 TIP570-SW-65 TIP570-SW-82 TIP570-SW-95 User Manual VxWorks Software Support (Legacy and VxBus-Enabled Software Support) Windows Software Support Linux Software Support QNX Software Support For operating systems please contact TEWS. keeps the right to change technical specification without further notice. Issue

27 TIP Interrupt generating Digital Inputs Application Information The TIP600 is an IndustryPack compatible module and has 16 digital inputs galvanically isolated by optocoupler. The individual inputs are potential free in relation to each other. A high performance input circuit ensures a defined switching point and polarization protection against confusing the pole. All inputs have an electronic debounce circuit with a freely programmable debounce time. All inputs can generate an interrupt. The signal edge handling is programmable. For systems with particularly fast reaction, each input can be assigned its own interrupt vector. The Software Support TIP600-SW-xx provides functions to configure the TIP600, read the input status and connect software events to input state changes. Technical Information Interface according to IndustryPack specification Identification-PROM supports auto-configuration Single Size IndustryPack 16 interrupt generating digital inputs 24V signal voltage for inputs, other voltages on request Optocouplers for galvanic isolation of input to computer system All inputs isolated against each other All inputs protected against confusing the pole All inputs have an electronic debounce circuit, debounce time is freely programmable keeps the right to change technical specification without further notice. Issue

28 Order Information RoHS Compliant TIP600-10R 16 Digital Input, 24V, isolated, pgm. interrupts, pgm. Debounce For the availability of non-rohs compliant (leaded solder) products please contact TEWS. Documentation TIP600-DOC Software TIP600-SW-42 TIP600-SW-65 TIP600-SW-82 TIP600-SW-95 User Manual VxWorks Software Support (Legacy and VxBus-Enabled Software Support) Windows Software Support Linux Software Support QNX Software Support For operating systems please contact TEWS. keeps the right to change technical specification without further notice. Issue

29 TIP Interrupt generating Digital Inputs Application Information The TIP605 is an IndustryPack compatible module with 16 digital inputs galvanically isolated by optocoupler. The individual inputs are potential free in relation to each other. A high performance input circuit ensures a defined switching point and polarization protection against confusing the pole. All inputs have an electronic debounce circuit with a freely programmable debounce time. All inputs can generate an interrupt. The signal edge handling is programmable. For the TIP605 the operating temperature range is 40 C to +85 C. The driver software TIP605-SW-xx provides functions to configure the TIP605, read the input status and connect software events to input state changes. Technical Information Interface according to IndustryPack specification Identification-PROM supports auto-configuration Single Size IndustryPack 16 interrupt generating digital inputs 24V signal voltage for inputs, other voltages on request Optocouplers for galvanic isolation of input to computer system All inputs isolated against each other All inputs protected against confusing the pole All inputs have an electronic debounce circuit, debounce time is freely programmable Operating temperature -40 C to +85 C MTBF (MIL-HDBK217F/FN2 G B 20 C) TIP605: h keeps the right to change technical specification without further notice. Issue

30 Order Information RoHS Compliant TIP605-10R 16 Digital Input, 24V, isolated, pgm. interrupts, pgm. Debounce, ext. temp. For the availability of non-rohs compliant (leaded solder) products please contact TEWS. Documentation TIP605-DOC Software TIP605-SW-42 TIP605-SW-65 TIP605-SW-82 TIP605-SW-95 User Manual VxWorks Software Support (Legacy and VxBus-Enabled Software Support) Windows Software Support Linux Software Support QNX Software Support For operating systems please contact TEWS. keeps the right to change technical specification without further notice. Issue

31 TIP Interrupt generating Digital Inputs Application Information The TIP606 is an IndustryPack compatible module and is designed for avionic test environments. It provides 16 optically isolated differential inputs for high unipolar input voltage which may exceed the supply voltage of the module. The inputs can withstand input voltage up to 44V maximum between the two differential input pins. Due to the differential inputs of the TIP606, it is even possible to use the module in noisy environments. The TIP606 provides a high differential input resistance of 112kohms typically. The interface circuit will detect a logic 1, if the differential voltage is typically greater than +14.0V and it will detect a logic 0, if the input voltage is typically lower than +3.5V. The inputs are isolated from the IP interface via optocouplers. Each input is capable of generating interrupts on rising or falling edges of the input signal. It is also possible to disable the generation of interrupts and poll the input register for new data. All inputs have an electronic debounce circuit. The debounce time is programmable in a range from 900µs up to 230ms in 256 steps of 900µs. The debounce circuit can also be disabled. The TIP606 is designed for an operating temperature from -40 C to +85 C. The driver software TIP606-SW-xx provides functions to configure the TIP606, read the input status and connect software events to input state changes. Technical Information Interface according to IndustryPack specification Identification-PROM supports auto-configuration Single Size IndustryPack 16 interrupt generating differential digital inputs Up to 44V signal voltage for all 16 inputs Optocouplers for galvanic isolation of input to computer system All inputs have an electronic debounce circuit, debounce time is freely programmable Operating temperature -40 C to +85 C MTBF (MIL-HDBK217F/FN2 G B 20 C) TIP606: h keeps the right to change technical specification without further notice. Issue

32 Order Information RoHS Compliant TIP606-10R 16 Digital Inputs for Avionic Applications, isolated, typ. 28V, max 42V For the availability of non-rohs compliant (leaded solder) products please contact TEWS. Documentation TIP606-DOC Software TIP606-SW-42 TIP606-SW-65 TIP606-SW-82 TIP606-SW-95 User Manual VxWorks Software Support (Legacy and VxBus-Enabled Software Support) Windows Software Support Linux Software Support QNX Software Support For operating systems please contact TEWS. keeps the right to change technical specification without further notice. Issue

33 TIP610 16/20 Channel TTL /IO Application Information The TIP610 is an IndustryPack compatible module with a TTL compatible I/O interface based on the Zilog Z8536 CIO, a counter/timer and parallel I/O device. The TIP610 implements two independent 8 bit, double-buffered, bidirectional I/O ports, plus a 4 bit special-purpose I/O port. The Z8536 CIO allows configuring each of the two 8 bit ports as input or output. The third I/O port can be configured as I/O or as handshake-control-port. A configuration jumper block permits to configure the two I/O ports as permanent or programmable input/output. Also the 4 bit port function is configured by these jumpers. Software Support (TIP610-SW-xx) is available for different operating systems. Technical Information Interface according to IndustryPack specification Identification-PROM supports auto-configuration Single Size IndustryPack 16/20 Channel TTL I/O arranged as two 8 bit I/O ports plus a 4 bit control port 24mA source/sink drive per line for the two 8bit I/O ports Zilog Z8536 I/O Controller on board Operating temperature 0 C to +70 C keeps the right to change technical specification without further notice

34 Order Information RoHS Compliant TIP610-10R 16/20 TTL I/O, Z8536 For the availability of non-rohs compliant (leaded solder) products please contact TEWS. Documentation TIP610-DOC Software TIP610-SW-42 TIP610-SW-65 TIP610-SW-82 TIP610-SW-95 User Manual VxWorks Software Support (Legacy and VxBus-Enabled Software Support) Windows Software Support Linux Software Support QNX Software Support For operating systems please contact TEWS. keeps the right to change technical specification without further notice

35 TIP620 Digital 48, Dual PI/T Application Information TIP620 is an IndustryPack compatible module emulating two Motorola MC68230 Programmable Interface/Timer (PI/T) ICs (without DMA). Together with the IDROM and additional logic they are integrated in a Xilinx Spartan II FPGA. The TIP620-10R and TIP620-11R each has its own IDROM and I/O configuration. By changing solder connections, users may convert from one product to the other or intermediate configurations. TIP620-10R is configured for 48 general purpose lines of bit I/O. Timer I/O is available. In this configuration 48 of the 50 cable lines are I/O, with 2 ground lines. The TIP620-11R is configured to support additional features of the PI/Ts, such as Timer, I/O, interrupts, and double-buffered data transfer with hardware handshake. 32 lines for bit I/O are available, 8 bit or 16 bit (unidirectional, bi-directional, single or double buffered) plus 8 lines as programmable handshake lines or timer I/O with alternate ground wires. Technical Information Interface according to IndustryPack specification Identification-PROM supports auto-configuration Single Size IndustryPack Up to 48 digital TTL I/O lines TTL compatible: 3.3V output high level, 5V tolerant Termination: 10kΩ pull-ups to 3.3V Output current max. +/- 2mA (partly +/- 8mA) ESD and overvoltage protection for each I/O line Operating temperature -40 C to +85 C keeps the right to change technical specification without further notice

36 Order Information RoHS Compliant TIP620-10R 48 TTL I/O, emulating 2 x MC68230 TIP620-11R Dual PIT, emulating 2 x MC68230 For the availability of non-rohs compliant (leaded solder) products please contact TEWS. Documentation TIP620-DOC Software User Manual For operating systems please contact TEWS. keeps the right to change technical specification without further notice

37 TIP630 Reconfigurable FPGA with 48 TTL I/O Application Information The TIP630 is an IndustryPack compatible module providing a user configurable FPGA with 200,000 system gates. 48 I/O lines of the FPGA are directly connected to the IP I/O connector. Each I/O line has a series damping resistor and is protected against ESD and overvoltage. Six pull up resistor networks mounted in sockets are provided for the I/O lines. Pull up voltage is selectable to be either +3.3V or +5V. The I/O lines are individually programmable as input, output or tri-state I/O. All IP bus signals of the IP interface are routed to the FPGA allowing to implement 8 MHz or 32 MHz bus interfaces with or without DMA. Several clock sources are available at the FPGA: the IP clock (8 MHz or 32 MHz), a local 32 MHz clock and two outputs of the programmable clock generator (250 KHz 166 MHz). The FPGA can be configured via the IP bus or optional by a PROM which can be mounted in a socket. The configuration download for the FPGA and the programming of the clock generator is implemented by a CPLD reserving the upper two 16 bit registers of the IP I/O space. After the FPGA has been configured with the user application it can be accessed via the IP bus. The CPLD can be used for reprogramming the FPGA without turning power off. Furthermore the CPLD offers a default ID-Prom contents which can stay active after configuring the FPGA or it can be switched off and replaced by a user ID-PROM implemented in the FPGA. User applications can be developed using the design software ISE WebPACK which can be downloaded free of charge from For First Time Users the Engineering Documentation TIP630-ED is recommended. The Engineering Documentation includes TIP630-DOC, schematics, data sheets / application notes of the components and well documented sample VHDL source code. Software support (TIP630-SW-xx) is available for different operating systems. keeps the right to change technical specification without further notice

38 Technical Information Interface according to IndustryPack specification Single Size IndustryPack Xilinx XC2S200-5 SpartanII FPGA logic configurable via IP bus or optional by PROM XC17S200APD8I All IP bus interface signals routed to the FPGA FPGA clock options: IP bus clock (8 or 32 MHz) Local 32 MHz clock oscillator PLL programmable clock generator CY22150 (250 KHz 166 MHz), 2 clock outputs connected to FPGA 48 digital TTL I/O lines I/O lines individually programmable as input, output, tri-state I/O 6 pull up resistor networks mounted in sockets jumper selectable +3.3V or +5V common for all pull up resistor networks ESD and overvoltage protection for each I/O line Operating temperature range -40 C to +85 C Order Information RoHS Compliant TIP630-10R Reconfigurable FPGA with 48 TTL I/O Lines, XC2S200-5 For the availability of non-rohs compliant (leaded solder) products please contact TEWS. Documentation TIP630-DOC User Manual TIP630-ED Engineering Documentation includes TIP630-DOC; schematics; data sheets; VHDL example code Software TIP630-SW-42 TIP630-SW-65 TIP630-SW-82 TIP630-SW-95 VxWorks Software Support (Legacy and VxBus-Enabled Software Support) Windows Software Support Linux Software Support QNX Software Support For operating systems please contact TEWS. keeps the right to change technical specification without further notice

39 TIP670 8 (4) Digital Inputs, 8 (4) Digital Outputs Application Information The TIP670 is an IndustryPack compatible module with 8 (4) digital inputs galvanically isolated by optocoupler. The individual inputs are potential free in relation to each other. A high performance input circuit ensures a defined switching point and polarization protection against confusing the pole. All inputs have an electronic debounce circuit with fixed debounce time. All inputs can generate an interrupt. The signal edge handling is programmable. For systems with particularly fast reaction, each input can be assigned its own interrupt vector. The TIP670 has 8 (4) digital outputs with galvanic isolation via optocouplers. The outputs are isolated against each other in groups of two. All outputs resist short-circuits and are protected against thermal overload. Technical Information Interface according to IndustryPack specification Identification-PROM supports auto-configuration Single Size IndustryPack 8 (4) interrupt generating digital inputs 24V signal voltage for inputs Optocouplers for galvanic isolation of input to computer system All inputs isolated against each other All inputs protected against confusing the pole All inputs have an electronic debounce circuit with fixed debounce time The output drivers are capable of driving 0.5A continuous per channel. Each output can be configured individually as high or low side switch. The driver software TIP670-SW-xx provides functions to configure the TIP670, read the input status, write the output status and connect software events to input state changes. Software Support (TIP670-SW-xx) is available for different operating systems. 8 (4) digital outputs, high and low side switches 24V signal voltage, current per output 0.5A Optocouplers for galvanic isolation of outputs to computer system Outputs are short-circuit protected Outputs are isolated against each other in groups of two Outputs protected against thermal overload Watch dog timer resets all channels in case of triggering failure keeps the right to change technical specification without further notice

40 Order Information RoHS Compliant TIP670-10R 8 Dig. Input (24V, isolated), 8 Digital Outputs (isolated, High Side or Low Side, 24V 0.5A) TIP670-20R 4 Digital Input, 4 Digital Output IP For the availability of non-rohs compliant (leaded solder) products please contact TEWS. Documentation TIP670-DOC Software TIP670-SW-42 TIP670-SW-65 TIP670-SW-82 TIP670-SW-95 User Manual VxWorks Software Support (Legacy and VxBus-Enabled Software Support) Windows Software Support Linux Software Support QNX Software Support For other operating systems please contact TEWS. keeps the right to change technical specification without further notice

41 TIP Differential I/O Lines with Interrupts Application Information The TIP672 is an IndustryPack compatible module providing 24 digital differential I/O lines using EIA-422 / EIA-485 compatible ESD protected line driver and receiver. Each line can be individually configured as differential input or differential output. The differential receivers are always enabled, allows determining the state of the I/O line at any time. This can be used as read back function for lines configured as outputs. All 24 input lines can generate an interrupt. Each input interrupt can individually be enabled and cleared. The signal edge handling is programmable. Configuring an I/O line as output enables the differential transmitter and the I/O line reflects the state programmed in the output register. Optional the I/O lines can be configured for simultaneous update internally and across several IP s by an external clock source. The polarity of the external clock source is programmable. 6 resistor networks (4 x 120 ohms) mounted in sockets are used to terminate the differential I/O lines. The resistor networks can be removed or changed in value. After power-on or reset all I/O lines are configured as input and all pending interrupts are cleared. Software Support (TIP672-SW-xx) is available for different operating systems. Technical Information Interface according to IndustryPack specification Identification-PROM supports auto-configuration Single Size IndustryPack 24 digital I/O lines with differential EIA-422 / EIA-485 compatible ESD protected line driver / receiver I/O lines individually programmable as input or output Full interrupt capability on inputs Six 4 x 120 ohms resistor networks mounted in sockets for I/O line termination Programmable simultaneous update feature by external clock source (TTL level) Operating temperature range -40 C to +85 C keeps the right to change technical specification without further notice

42 Order Information RoHS Compliant TIP672-10R 24 Differential I/O Lines with Interrupts TIP672-10R-ET 24 Differential I/O Lines with Interrupts (Ext. Temperature) For the availability of non-rohs compliant (leaded solder) products please contact TEWS. Documentation TIP672-DOC Software TIP672-SW-42 TIP672-SW-65 TIP672-SW-82 TIP672-SW-95 User Manual VxWorks Software Support (Legacy and VxBus-Enabled Software Support) Windows Software Support Linux Software Support QNX Software Support For other operating systems please contact TEWS. keeps the right to change technical specification without further notice

43 TIP TTL I/O Lines with Interrupts Application Information The TIP675 is an IndustryPack compatible module providing 48 digital TTL tri-state I/O lines with pull up resistors. Each of the 48 I/O lines is ESD protected and protected against overvoltage. The line inputs are always enabled, allows determining the state of the I/O line at any time. This can be used as read back function for lines configured as outputs. All 48 input lines can generate an interrupt. Each input interrupt can individually be enabled and cleared. Interrupts for negative and positive transitions could be used together with separate interrupt pending registers. All interrupt inputs have an electronic debounce circuit to prevent short spikes on input lines to cause an IP interrupt. Optional the I/O lines can be configured for simultaneous update internally and across several IP s by an external clock source. The polarity of the external clock source is programmable. 6 resistor networks mounted in sockets are used to pull the tri-state I/O lines to a logic high value. The resistor networks can be removed or changed in value. After power-on or reset all I/O lines are configured as input and all pending interrupts are cleared. Software Support (TIP675-SW-xx) is available for different operating systems. Technical Information Interface according to IndustryPack specification Identification-PROM supports auto-configuration Single Size IndustryPack 48 digital TTL tri-state I/O lines with pull up resistors I/O lines individually programmable as input or output Full interrupt capability on inputs Electronic debounce circuit for interrupt ESD and overvoltage protection for each I/O line Resistor networks mounted in sockets as I/O line pull up Programmable simultaneous update feature by external clock source (TTL level) Operating temperature range -40 C to +85 C keeps the right to change technical specification without further notice

44 Order Information RoHS Compliant TIP675-10R 48 TTL I/O Lines with Interrupts For the availability of non-rohs compliant (leaded solder) products please contact TEWS. Documentation TIP675-DOC Software TIP675-SW-42 TIP675-SW-65 TIP675-SW-82 TIP675-SW-95 User Manual VxWorks Software Support (Legacy and VxBus-Enabled Software Support) Windows Software Support Linux Software Support QNX Software Support For other operating systems please contact TEWS. keeps the right to change technical specification without further notice

45 TIP (8) Digital Outputs, high and low side switches Application Information The TIP700 is an IndustryPack compatible module providing 16 (8) digital outputs with galvanic isolation via optocouplers. The outputs are isolated against each other in groups of two. All outputs resist short-circuits and are protected against thermal overload. The outputs are capable of driving 0.5A per channel. Each output can be configured individually as high or low side switch. Software Support (TIP700-SW-xx) is available for different operating systems. Technical Information Interface according to IndustryPack specification Identification-PROM supports auto-configuration Single Size IndustryPack 16 (8) digital outputs, high and low side switches 24V signal voltage, current per output 0.5A Optocouplers for galvanic isolation of outputs to computer system Outputs are isolated against each other in groups of two Outputs are short-circuit protected Outputs protected against thermal overload Watchdog timer resets all channels in case of triggering failure keeps the right to change technical specification without further notice. Issue

46 Order Information RoHS Compliant TIP700-10R 16 Digital Outputs, isolated, High Side or Low Side, 24V 0.5A TIP700-20R 8 Digital Outputs, isolated, High Side or Low Side, 24V 0.5A For the availability of non-rohs compliant (leaded solder) products please contact TEWS. Documentation TIP700-DOC Software TIP700-SW-42 TIP700-SW-65 TIP700-SW-82 TIP700-SW-95 User Manual VxWorks Software Support (Legacy and VxBus-Enabled Software Support) Windows Software Support Linux Software Support QNX Software Support For other operating systems please contact TEWS. keeps the right to change technical specification without further notice. Issue

47 TIP Differential I/O Lines with Interrupts Application Information The TIP710 is an IndustryPack compatible module providing 16 digital outputs configured as high side switch with galvanic isolation via optocouplers. The TIP710 directly controls up to 16 lines of all kinds of resistive, capacitive and inductive loads. The outputs are capable of driving 1A continuous per channel at an external supply voltage of 6V to 48V. All outputs resist short-circuits and are protected against thermal overload. After power-on or reset all channels are in the off state. A hardware watchdog clears all outputs in case of trigger failure. Software Support (TIP710-SW-xx) is available for different operating systems. Technical Information Interface according to IndustryPack specification Identification-PROM supports auto-configuration Single Size IndustryPack 16 digital outputs, high side switches Output signal voltage 6V to 48V, common to all outputs, externally supplied Output current: 1A continuous per channel Optocouplers for galvanic isolation of outputs to computer system Outputs are short-circuit protected Outputs protected against thermal overload Watchdog timer resets all channels in case of triggering failure Operating temperature range 40 C to +85 C keeps the right to change technical specification without further notice

48 Order Information RoHS Compliant TIP710-10R 16 Digital Outputs, isolated, High Side, 6V-48V 1.0A For the availability of non-rohs compliant (leaded solder) products please contact TEWS. Documentation TIP710-DOC Software TIP710-SW-42 TIP710-SW-65 TIP710-SW-82 TIP710-SW-95 User Manual VxWorks Software Support (Legacy and VxBus-Enabled Software Support) Windows Software Support Linux Software Support QNX Software Support For other operating systems please contact TEWS. keeps the right to change technical specification without further notice

49 TIP810 CAN Bus IP Application Information The TIP810 is an IndustryPack compatible module with a complete CAN bus interface using the Philips SJA1000 CAN controller. The Philips SJA1000 CAN controller is a stand-alone controller for the Controller Area Network (CAN) used within automotive and general industrial environments. It is the successor of the PCA82C200 CAN controller (Basic CAN) from Philips Semiconductors which was used on the TIP810-10R V1.0. Additionally, a new mode of operation (PeliCAN) is implemented on the SJA1000 which supports the CAN 2.0B protocol specification with several new features. The SJA1000 has the capability to transmit, receive and perform message filtering on standard and extended messages. The TIP810 supports an 8 bit bus interface which permits byte accesses to the internal registers of the SJA1000 controller. The physical interface supports both, CAN highspeed (according to ISO11898) and modified RS485. Both physical interfaces are optically isolated from the CAN controller. An on board DC/DC converter supplies the isolated parts of the TIP810. The CAN Software Support TIP810-SW-xx provides functionality to route CAN messages to dedicated processes. Software Support (TIP810-SW-xx) is available for different operating systems. keeps the right to change technical specification without further notice. Issue

50 Technical Information Interface according to IndustryPack specification Identification-PROM supports auto-configuration Single Size IndustryPack CAN bus interface based on Philips SJA1000 controller Physical interface: CAN High Speed (according to ISO ) and modified RS485 Physical interface optically isolated from CAN controller On board DC/DC converter Maximum transfer rate 1 Mbit/s (bus length up to 40 m) Order Information RoHS Compliant TIP810-10R 1 x solated CAN Bus based on Philips SJA1000, ISO11898 CAN High Speed or RS485 For the availability of non-rohs compliant (leaded solder) products please contact TEWS. Documentation TIP810-DOC Software TIP810-SW-42 TIP810-SW-65 TIP810-SW-82 TIP810-SW-95 User Manual VxWorks Software Support (Legacy and VxBus-Enabled Software Support) Windows Software Support Linux Software Support QNX Software Support For other operating systems please contact TEWS. keeps the right to change technical specification without further notice. Issue

51 TIP815 ARCNET Controller TIP815-11R Application Information The TIP815 is an IndustryPack compatible module with a complete ARCNET interface using the controller COM The COM20020 contains the ARCNET controller with transceiver and Dual Port RAM. Various network topologies are supported (Star, Tree, Bus). The TIP815 is ideal suited for industrial / factory automation and automotive applications. Two interface types of the TIP815 are available: the TIP815-10R/-11R offer the traditional isolated hybrid interface and the TIP815-20R/-21R provide an isolated RS485 differential driver interface. Two speed grades of the TIP815 are available: the TIP815-10R/-11R/-20R offer 2.5 Mbps and the TIP815-21R provides 5 Mbps. The TIP815-TM-10R transition module provides a BNC connector in a 6U front panel and bus termination capabilities. Software support (TIP815-SW-xx) is available for different operating systems. Technical Information Interface according to IndustryPack specification Identification-PROM supports auto-configuration Single Size IndustryPack ARCNET Interface based on COM20020 Complete ARCNET Controller with transceiver and Dual Port RAM Ideal for industrial / factory automation and automotive applications Deterministic, 2.5 Mbps (TIP815-10R/-11R/-20R) or 5.0 Mbps (TIP815-21R), Token Passing Protocol Improved Diagnostics Flexible Media Interface Supports various network topologies (star, tree, bus) Traditional hybrid Interface (isolated) for long distances (TIP815-10R/-11R only) or isolated RS485 differential driver interface (TIP815-20R/-21R only) keeps the right to change technical specification without further notice

52 TIP815-TM-10R Order Information RoHS Compliant TIP815-10R ARCNET Traditional Interface, 20MHz Clock, 2.5 Mbps TIP815-11R ARCNET Traditional Interface, 40MHz Clock, 2.5 Mbps TIP815-20R ARCNET RS485 Interface, 2.5 Mbps TIP815-21R ARCNET RS485 Interface, 5 Mbps For the availability of non-rohs compliant (leaded solder) products please contact TEWS. Documentation TIP815-DOC Software TIP815-SW-42 TIP815-SW-65 TIP815-SW-82 TIP815-SW-95 User Manual VxWorks Software Support (Legacy and VxBus-Enabled Software Support) Windows Software Support Linux Software Support QNX Software Support For other operating systems please contact TEWS. keeps the right to change technical specification without further notice

53 TIP816 CAN Bus Controller (CAN Specification 2.0 A and B) Application Information The TIP816 is an IndustryPack compatible module and offers a complete CAN bus interface using the Innovasic Semiconductor IA82527 CAN controller. The IA82527 is a form, fit and function replacement for the Intel CAN controller. This controller supports the standard data and remote frame as well as the extended data and remote frame according to CAN specification 2.0 part A and part B. It has the capability to transmit, receive and perform message filtering on extended and standard messages. The TIP816 supports a 16 bit bus interface which permits word and byte accesses to the internal registers of the CAN controller. The physical interface supports CAN High Speed (according to ISO11 898) as well as modified RS485. Both physical interfaces are optically isolated from the CAN controller. The CAN Software Support TIP816-SW-xx provides functionality to route CAN messages to dedicated processes. Technical Information Interface according to IndustryPack specification Identification-PROM supports auto-configuration Single Size IndustryPack CAN bus interface based on IA82527 chip Support CAN specification 2.0 part A and part B (Standard and Extended Data Frames) Programmable global mask 15 message objects of 8 byte data length Powerful error handling Programmable transfer rates Physical interface CAN High Speed (according to ISO ) and modified RS485 Physical interface optically isolated from CAN controller On board DC/DC converter Maximum transfer rate 1 Mbit/s (bus length up to 40 m) Operating temperature -40 C to +85 C keeps the right to change technical specification without further notice. Issue

54 Order Information RoHS Compliant TIP816-10R 1 x isolated CAN Bus based on Intel 82527, ISO11898 CAN High Speed or RS485 For the availability of non-rohs compliant (leaded solder) products please contact TEWS. Documentation TIP816-DOC Software TIP816-SW-42 TIP816-SW-65 TIP816-SW-82 TIP816-SW-95 User Manual VxWorks Software Support (Legacy and VxBus-Enabled Software Support) Windows Software Support Linux Software Support QNX Software Support For other operating systems please contact TEWS. keeps the right to change technical specification without further notice. Issue

55 TIP830 8 Channel 12 (16) bit Simultaneous Sampling A/D Application Information The TIP830 family consists of IndustryPack compatible modules with 8 independent channels of high resolution 12 bit or 16 bit analog-to-digital conversion. Each channel consists of a Sample and Hold and a 12 bit or 16 bit A/D converter. The maximum time for sample and convert is 25µs for all channels. The full-scale input range is +/-10V. A start-of-conversion is initiated by software command or via the trigger I/O pin. All eight channels of the TIP830 sample and convert simultaneously. By connecting the trigger I/O pins of several modules it is possible to expand the simultaneous sample and convert feature to several TIP830 modules. Software support (TIP830-SW-xx) is available for different operating systems. Technical Information Interface according to IndustryPack specification Identification-PROM supports auto-configuration Single Size IndustryPack Eight 12 bit (16 bit) A/D converter ( ADS8506/7 ) Complete 12 bit (16 bit) sampling A/D converter with internal reference +/- 10 V input, impedance 45 kohm Integral linearity error: +/- 0.9LSB (+/- 3LSB) Differential linearity error: +/- 0.9LSB (+3/-2LSB) No missing codes: 12 bits (15 bits) 25 µs maximum for sample and convert Factory calibration of gain and offset for each channel, correction parameters stored in serial EEPROM Simultaneous Sample and Convert for all 8 channels, expandable to other TIP830 by external trigger I/O pin Operating temperature range -40 C to +85 C keeps the right to change technical specification without further notice

56 Order Information RoHS Compliant TIP830-10R 8 Channel 12 bit Simultaneous Sampling A/D, +/- 10V TIP830-20R 8 Channel 16 bit Simultaneous Sampling A/D, +/- 10V For the availability of non-rohs compliant (leaded solder) products please contact TEWS. Documentation TIP830-DOC Software TIP830-SW-42 TIP830-SW-65 TIP830-SW-82 TIP830-SW-95 User Manual VxWorks Software Support (Legacy and VxBus-Enabled Software Support) Windows Software Support Linux Software Support QNX Software Support For other operating systems please contact TEWS. keeps the right to change technical specification without further notice

57 TIP Channel of 14 bit A/D Conversion Application Information The TIP845 is an IndustryPack compatible module providing 48 single-ended or 24 differential ADC input channels. The data acquisition and conversion time is up to 2.5µs without channel / gain change and up to 10.5µs with channel / gain change. The resolution is 14 bit. The input multiplexer of the A/D circuit offers analog overvoltage protection of up to 70Vpp. A programmable gain amplifier allows gains of 1, 2, 4 or 8 resulting in input voltage ranges of +/-10V, +/-5V, +/-2.5V or +/-1.25V. Additionally the TIP845 provides a sequencer to control the analog inputs without wasting CPU time. Each of the A/D channels can be independently enabled and configured by a sequencer instruction RAM. After the last instruction of a programmed sequence has completed, the ADC data of all enabled channels are stored in the data RAM. The repeat frequency of the sequencer can be programmed by using the sequence timer. The sequence timer is programmable from 100µs to s in steps of 100µs. The sequencer starts a new sequence whenever the timer reaches the programmed value. A special function is the sequencer continuous mode. It is activated by setting the sequence timer register to 0. In this mode the sequencer will start again with the first instruction of the sequence as soon as the last instruction of the previous sequence has been completed. An interrupt can be generated at end-of-settling, end-ofconversion or end-of-sequencer cycle supporting an 8 bit vector. Each TIP845 is factory calibrated. The calibration information is stored in the Identification-PROM unique to each IP. Software support (TIP830-SW-xx) is available for different operating systems. keeps the right to change technical specification without further notice

58 Technical Information Interface according to IndustryPack specification Identification-PROM supports auto-configuration Single Size IndustryPack Up to 48 single-ended or 24 differential ADC input channels 70Vpp overvoltage protection Programmable Gain Amplifier with gain 1, 2, 4 or 8 Input voltage range gain = 1: +/-10V gain = 2: +/-5V gain = 4: +/-2.5V gain = 8: +/-1.25V 14 bit A/D converter with internal S/H and reference On board sequencer Vectored interrupts Factory calibrated, calibration information stored in ID PROM unique to each IP Operating temperature -40 C to +85 C Order Information RoHS Compliant TIP845-10R 48 Channel 14 bit A/D, gain 1,2,4,8, +/- 10V For the availability of non-rohs compliant (leaded solder) products please contact TEWS. Documentation TIP845-DOC Software TIP845-SW-42 TIP845-SW-65 TIP845-SW-82 TIP845-SW-95 User Manual VxWorks Software Support (Legacy and VxBus-Enabled Software Support) Windows Software Support Linux Software Support QNX Software Support For other operating systems please contact TEWS. keeps the right to change technical specification without further notice

59 TIP865 4 Channel Serial Interface Application Information The TIP865 is an IndustryPack compatible module with four channels of high performance multimode serial interface. The TIP865-10R offers four RS232 interfaces, the TIP865-11R provides four TTL interfaces, the TIP865-20R supports four RS422 interfaces, the TIP865-30R provides four RS485 multidrop interfaces and the TIP865-51R offers two RS422 and two RS485 interfaces. The full modem control is available for each of the 4 serial interfaces on the TIP865-10R and 11R supporting RxD, TxD, RTS, CTS, DCD and clock. The TIP865-20R provides RxD, TxD and clock. The TIP865-30R supports a bidirectional RS485 bus. The TIP865-51R is a combination of the TIP865-20R and -30R. Two channels support RxD, TxD and clock for the RS422 interface and two channels supports a bidirectional RS485 bus. Features include programmable baud rates to 2 Mbit/sec, asynchronous or synchronous protocols including NRZ, NRZI, FM, T1, SDLC/HDLC. The maximum baud rate of the TIP865 is affected by several options like the clock input source, clock frequency, used clock mode, synchronous or asynchronous serial mode and the on board physical transceiver. For more details about maximum baud rates please see User Manual TIP865-DOC. The communication controller used is the industry standard Z85C30. Serial line driver software TIP865-SW-xx is available (support only asynchronous protocols). keeps the right to change technical specification without further notice

60 Technical Information Interface according to IndustryPack specification Identification-PROM supports auto-configuration Single Size IndustryPack 4 channels multimode serial interface Support of modem controls on TIP865-10R and -11R: RxD, TxD, DTR, DCD, RTS, CTS, Clock Support of RxD+/-, TxD+/- and Clock on TIP865-20R Support of TxD/RxD+, TxD/RxD- on TIP865-30R Support of TxD, RxD, CLKIN, CLKOUT resp. TxD/RxD+, TxD/RxD- on TIP865-51R Programmable baud rates to 2 Mbps Asynchronous and synchronous protocols Operating temperature range 0 C to +70 C Order Information RoHS Compliant TIP865-10R 4 Channel serial RS232, Zilog Z85C30 TIP865-11R 4 Channel serial TTL, Zilog Z85C30 TIP865-20R 4 Channel serial RS422, Zilog Z85C30 TIP865-30R 4 Channel serial RS485, Zilog Z85C30 TIP865-51R 2 Channel serial RS422 and 2 Channel serial RS485, Zilog Z85C30 For the availability of non-rohs compliant (leaded solder) products please contact TEWS. Documentation TIP865-DOC Software TIP865-SW-42 TIP865-SW-65 TIP865-SW-82 TIP865-SW-95 User Manual VxWorks Software Support (Legacy and VxBus-Enabled Software Support) Windows Software Support Linux Software Support QNX Software Support For other operating systems please contact TEWS. keeps the right to change technical specification without further notice

61 TIP866 8 Channel Serial Interface RS232 / TTL / RS422 Application Information The TIP866 is an IndustryPack compatible module providing eight channels of high performance asynchronous serial interface. Three different modules are available. The TIP866-10R provides RS232 interface, the TIP866-11R offers TTL level interface and the TIP866-20R provides RS422 interface. Each channel has a 64 byte transmit FIFO and a 64 byte receive FIFO to significantly reduce the overhead required to provide data to and get data from the transmitters and receivers. The FIFO trigger levels are programmable. The TIP866-10R and -11R support RxD, TxD, RTS, CTS and GND for each of the eight RS232 channels. The TIP866-20R supports RxD+/-, TxD+/- and GND for each of the eight RS422 channels. The baud rate is individually programmable up to kbaud for the TIP866-10R and up to kbaud for the TIP866-11R and -20R. The TIP866-10R and -20R use ESD protected transceivers (up to +/-15KV according to IEC ). The module versions TIP866-xx-ET are designed for the extended operating temperature from -40 C to +85 C. The Transition Module TIP866-TM-10R provides 8 DB25 connectors mounted in a 6U 8TE front panel. The TIP866-TM-20R provides 8 RJ45 connectors mounted in a 6U 4TE front panel. The TIP866-TM-30R provides 16 4-pin RJ connectors mounted in a 6U 4TE front panel. Serial line driver software TIP866-SW-xx is available for different operating systems. Technical Information Interface according to IndustryPack specification Identification-PROM supports auto-configuration Single Size IndustryPack 8 channels asynchronous serial interface Support of RxD, TxD, RTS, CTS, GND per channel for TIP866-10R and -11R; support of RXD+/-, TXD+/- and GND for TIP866-20R Programmable baud rates up to KBaud for TIP866-10R and up to KBaud for TIP866-11R and -20R 64 byte transmit FIFO per channel 64 byte receive FIFO per channel ESD protected RS232 and RS422 interface (up to +/-15KV according to IEC ) Operating temperature: 0 C to +70 C (TIP866-10R,-11R,-20R) -40 C to +85 C (TIP866-xx-ET) keeps the right to change technical specification without further notice

62 Order Information RoHS Compliant TIP866-10R TIP866-10R-ET TIP866-11R TIP866-11R-ET TIP866-20R TIP866-20R-ET TIP866-TM-10R TIP866-TM-20R TIP866-TM-30R TIP866-IO-10R 8 Channel Serial RS232, ST16C654 8 Channel Serial RS232, ST16C654, ext. temp. 8 Channel Serial TTL, ST16C654 8 Channel Serial TTL, ST16C654, ext. temp. 8 Channel Serial RS422, ST16C654 8 Channel Serial RS422, ST16C654, ext. temp. 8 Channel Transition Module (DB25) 8 Channel Transition Module (RJ45) 16 Channel Transition Module (4-pin RJ connectors) Mounting Rail I/O Module For the availability of non-rohs compliant (leaded solder) products please contact TEWS. Documentation TIP866-DOC User Manual for TIP866-10R TIP866-TM-10-DOC User Manual for TIP866-TM-10R-DOC TIP866-TM-20-DOC User Manual for TIP866-TM-20R-DOC TIP866-TM-30-DOC User Manual for TIP866-TM-30R-DOC TIP866-IO-10-DOC User Manual for TIP866-IO-10R-DOC Software TIP866-SW-42 TIP866-SW-65 TIP866-SW-82 TIP866-SW-95 VxWorks Software Support (Legacy and VxBus-Enabled Software Support) Windows Software Support Linux Software Support QNX Software Support For other operating systems please contact TEWS. keeps the right to change technical specification without further notice

63 TIP866-IO DIN Rail Mounting I/O Module (8 x DB9) for TIP866/867 TIP866-IO-10R TA106-10R Application Information The TIP866-IO is a DIN Rail Mounting I/O module for the serial interfaces TIP866 and TIP867. The TIP866-IO supports all versions of the TIP866 (RS232, RS422 and TTL-Level interfaces), the TIP867 (RS485 interface) and all versions of the IP- Octal. Eight DB9 male connectors are mounted on the module. The TIP866-IO supports TXD, RXD, RTS, CTS and GND for each of the eight channels of the TIP866-10R/11R (RS232 / TTL-Level). TxD+/-, RxD+/-, GND are supported for the TIP866-20R (RS422) and Dx+/-, GND for the TIP867-10R (RS485). Technical Information DIN Rail Mounting I/O module, 95 mm x 83 mm 8 DB9 male connectors Terminal point for shield of all 8 DB9 connectors Supports all versions of the TIP866, TIP867 and IP-Octal Cable TA106-10R: 0.8m ribbon cable with 50 pin ribbon cable connectors, is included Order Information RoHS Compliant TIP866-IO-10R Mounting Rail I/O Module For the availability of non-rohs compliant (leaded solder) products please contact TEWS. Documentation TIP866-IO-10-DOC User Manual keeps the right to change technical specification without further notice

64 TIP866-TM-10 Transition Module (8 x DB25) for TIP866/TIP867 TIP866-TM-10R TA106-10R Application Information The TIP866-TM-10R is a transition module for the serial interfaces TIP866 and TIP867. The transition module supports all versions of the TIP866 (RS232, RS422 and TTL-Level interfaces), the TIP867 (RS485 interface) and all versions of the IP-Octal. Eight DB25 female connectors are mounted in a 6U 8TE EMV front panel. The transition module supports TXD, RXD, RTS, CTS and GND for each of the eight channels of the TIP866-10R/11R (RS232 / TTL-Level). TxD+/-, RxD+/-, GND are supported for the TIP866-20R (RS422) and Dx+/-, GND for the TIP867-10R (RS485). Each serial channel can be configured by jumper as DTE or DCE. On board termination is provided for RS422/RS485. Termination can be activated by jumper. A 2 pin terminal block on the transition module can be used to provide +5V to each of the eight DB25 connectors (pin 9) and to supply the on board termination for RS422/ RS485. Support of the +5V is selectable by jumper for each serial channel. The +5V is fuse protected by a 1A multi-fuse. Technical Information 6U / 8TE EMV front panel 8 DB25 female connectors mounted in front panel Supports all versions of the TIP866, TIP867 and IP- Octal DTE and DCE configuration by jumper fields RS422 and RS485 termination selectable by jumper +5V / GND by 2 pin terminal block; Power only required to supply on board termination or to provide +5V to pin 9 of the DB25 connectors of channel 1 to 8 Fuse protected by a 1A multi-fuse Cable TA106-10R: 0.8m ribbon cable with 50 pin ribbon cable connectors, is included Order Information RoHS Compliant TIP866-TM-10R 8 Channel Transition Module, DB25 For the availability of non-rohs compliant (leaded solder) products please contact TEWS. Documentation TIP866-TM-10-DOC User Manual keeps the right to change technical specification without further notice

65 TIP866-TM-20 Transition Module (8 x RJ45) for TIP866/TIP867 TIP866-TM-20R TA106-10R Application Information The TIP866-TM-20R is a transition module for the serial interfaces TIP866 and TIP867. The transition module TIP866-TM-20R supports all versions of the TIP866 (RS232, RS422 and TTL-Level interfaces) and the TIP867 (RS485 interface) and all versions of the IP-Octal. Eight shielded RJ45 connectors are mounted in a 6U 4TE EMV front panel. The transition module supports TXD, RXD, RTS, CTS and GND for each of the eight channels of the TIP866-10R/11R (RS232 / TTL-Level). TxD+/-, RxD+/-, GND are supported for the TIP866-20R (RS422) and Dx+/-, GND for the TIP867-10R (RS485). Each serial channel can be configured by jumper as DTE or DCE. On board termination is provided for RS422/RS485. Termination can be activated by jumper. A 2 pin terminal block on the transition module can be used to provide +5V to the RJ45 connectors (pin 1) of channel 3 to 8 and to supply the on board termination for RS422/ RS485. Support of the +5V is selectable by jumper. The +5V is fuse protected by a 1A multi-fuse. Technical Information 6U / 4TE EMV front panel 8 shielded RJ45 connectors mounted in front panel Supports all versions of the TIP866, TIP867 and IP- Octal DTE and DCE configuration by jumper fields RS422 and RS485 termination selectable by jumper +5V / GND by 2 pin terminal block; Power only required to supply on board termination or to provide +5V to pin 1 of RJ45 connectors of channel 3 to 8 Fuse protected by a 1A multi-fuse Cable TA106-10R: 0.8m ribbon cable with 50 pin ribbon cable connectors, is included Order Information RoHS Compliant TIP866-TM-20R 8 Channel Transition Module, RJ45 For the availability of non-rohs compliant (leaded solder) products please contact TEWS. Documentation TIP866-TM-20-DOC User Manual keeps the right to change technical specification without further notice

66 TIP866-TM-30 Transition Module (16 x RJH) for TIP866/TIP867 TIP866-TM-30R TA106-10R Application Information The TIP866-TM-30R is a high density transition module for the serial interfaces TIP866 and TIP867. The TIP866-TM-30R supports the TIP866-10R/11R (RS232, and TTL-Level interfaces), the TIP867 (RS485 interface) and the according versions of the IP-Octal. Up to two modules can be connected to one transition module TIP866-TM-30R. Sixteen 4-pin RJH connectors are mounted in a 6U 4TE EMV front panel. Technical Information 6U / 4TE EMV front panel Sixteen 4pin RJH connectors mounted in front panel Supports TIP866-10R/11R, TIP867 and IP Octal RS485 termination selectable by jumper The transition module supports TXD, RXD, GND for each set of the eight channels of the TIP866-10R/11R (RS232 / TTL-Level) and Dx+/-, GND for the TIP867-10R (RS485). On board termination is provided for RS485. Termination can be activated by jumper. A two pin screw terminal (X9) can be used to supply the on board termination for RS V / GND by 2 pin terminal block; Power only required to supply on board termination Fuse protected by a 1A multi-fuse Two Cables TA106-10R: 0.8m ribbon cable with 50 pin ribbon cable connectors, is included Order Information RoHS Compliant TIP866-TM-30R 8 Channel Transition Module, RJH For the availability of non-rohs compliant (leaded solder) products please contact TEWS. Documentation TIP866-TM-30-DOC User Manual keeps the right to change technical specification without further notice

67 TIP867 8 Channel Serial Interface RS485 Application Information The TIP867 is an IndustryPack compatible module and offers eight channels of high performance RS485 serial interface. Each channel has a 4 byte transmit FIFO and an 8 byte receive FIFO to significantly reduce the overhead required to provide data to and get data from the transmitters and receivers. The TIP867 supports Dx+, Dx- and GND for each of the eight RS485 channels. The baud rate is individually programmable up to 2 Mbps. The TIP867 uses ESD protected transceivers (up to +/-15KV according to IEC ). All transition modules of the TIP866 series are well suited for the TIP867. The transition module TIP866-TM-10R provides 8 DB25 connectors mounted in a 6U 8TE front panel. The transition module TIP866-TM-20R offers 8 RJ45 connectors mounted in a 6U 4TE front panel. The transition module TIP866-TM-30R provides 16 4-pin RJ connectors mounted in a 6U 4TE front panel. Serial line driver software TIP867-SW-xx is available (support only asynchronous protocols). Technical Information Interface according to IndustryPack specification Identification-PROM supports auto-configuration Single Size IndustryPack 8 channels RS485 serial interface Support of Dx+, Dx- and GND per channel Programmable baud rates to 2 Mbps ESD protected RS485 interface (up to +/- 15KV to IEC ) Operating temperature 0 C to +70 C keeps the right to change technical specification without further notice

68 Order Information RoHS Compliant TIP867-10R TIP867-20R TIP866-TM-10R TIP866-TM-20R TIP866-TM-30R TIP866-IO-10R 8 Channel Serial RS485 IP (Dx+/- and GND per channel) 8 Channel Serial RS485 IP (Dx+/-, CLK+/- and GND per channel) 8 Channel Transition Module (DB25) 8 Channel Transition Module (RJ45) 16 Channel Transition Module (4-pin RJ connectors) Mounting Rail I/O Module For the availability of non-rohs compliant (leaded solder) products please contact TEWS. Documentation TIP867-DOC User Manual for TIP867 TIP866-TM-10-DOC User Manual for TIP866-TM-10R-DOC TIP866-TM-20-DOC User Manual for TIP866-TM-20R-DOC TIP866-TM-30-DOC User Manual for TIP866-TM-30R-DOC TIP866-IO-10-DOC User Manual for TIP866-IO-10R-DOC Software TIP867-SW-42 TIP867-SW-65 TIP867-SW-82 TIP867-SW-95 VxWorks Software Support (Legacy and VxBus-Enabled Software Support) Windows Software Support Linux Software Support QNX Software Support For other operating systems please contact TEWS. keeps the right to change technical specification without further notice

69 TIP903 Three Channel Extended CAN Bus Application Information The TIP903 is an IndustryPack compatible module with three extended CAN bus interfaces using three CAN controllers. The controllers support the standard data and remote frame as well as the extended data and remote frame according to CAN specification 2.0 part A and part B (standard 11 bit identifier and extended 29 bit identifier). It has the capability to transmit, receive and perform message filtering on extended and standard messages. The TIP903 supports a 16 bit bus interface which permits word and byte accesses to the internal registers of the three CAN controllers. The physical interface supports CAN High Speed according to ISO11898 for each of the three channels. The bus line termination is selectable by jumpers separate for each bus line. The data transfer rates of up to 1 Mbps are supported for a bus line length of 40 m. Software Support (TIP903-SW-xx) for different operating systems is available. Technical Information Form Factor: Single-Size IndustryPack Module Board size: 45.73mm x 99.09mm Identification-PROM supports auto-configuration 8 MHz IP Clock Three CAN Bus interfaces based on CAN Controller Support of CAN specification 2.0 Part A and B (standard and extended data frames) Programmable global mask 15 message objects of 8 byte data length Powerful error handling Programmable transfer rates Physical interface CAN High Speed ( according to ISO 11898) per channel Maximum transfer rate 1 Mbit/s (bus length up to 40m) Operating temperature -40 C to +85 C MTBF (MIL-HDBK217F/FN2 G B 20 C) TIP903: h keeps the right to change technical specification without further notice. Issue

70 Order Information RoHS Compliant TIP903-10R 3 x CAN Bus based on Intel 82527, ISO11898 CAN High Speed For the availability of non-rohs compliant (leaded solder) products please contact TEWS. Documentation TIP903-DOC Software TIP903-SW-42 TIP903-SW-65 TIP903-SW-82 TIP903-SW-95 User Manual VxWorks Software Support (Legacy and VxBus-Enabled Software Support) Windows Software Support Linux Software Support QNX Software Support For other operating systems please contact TEWS. keeps the right to change technical specification without further notice. Issue

71 VMEbus Modules VMEbus technology is well-established for industrial applications and automation technology with high-security standards, infinite processor performance requirements, and real-time capability. A wide range of technical and commercial aspects have contributed to the unique success of the VMEbus concept. Among these aspects is the international open standard nature of VME, a mechanical structure based on classic 19-inch rackmount concepts, a choice of 3U and 6U Eurocard sizing, a wide range of COTS (commercial off-the-shelf) products, a wide vendor base, and continued improvement to the VME standard. After more than two decades on the market, VMEbus has become a proven and reliable industry standard for many industrial and communications applications. Since 1985, TEWS TECHNOLOGIES has offered VME products. At that time, TEWS recognized the need for a standard I/O product offering, and with Motorola's backing of the bus architecture, VME was the natural choice. Our experience in the modular I/O market grew from our work with VME. In addition to our well known modular I/O solutions, we offer VME IndustryPack carriers and general VME-based industrial I/O solutions. TEWS is committed to long-term support of the VMEbus, and will continue to announce VME products in the near future. If you wish to inquire about custom VME designs, please contact TEWS directly at our offices in Germany or the United States. TEWS works closely with OEM and government customers to deliver accelerated time to market, long-term product availability and comprehensive product lifecycle management -- from the design stage through manufacturing, testing and beyond to post-sales support. In addition to our well known IP modules, we offer a complete line of CompactPCI, PCI, PCI Express, PCI Express Mini Card, VMEbus, PC104+, AMC, MicroTCA, FMC, XMC, and PMC modules off-the-shelf. All TEWS modules feature a five-year limited warranty, and many are offered standard in extended temperature (-40 C to +85 C). Software drivers for VxWorks, Linux, QNX, Integrity and Windows are available. For more information go to

72 TVME200 VMEbus Carrier for 4 IndustryPacks Application Information The TVME200 is 6U VMEbus Carrier for up to 4 singlesize or 2 double-size IndustryPack (IP) modules used to build modular, flexible and cost effective I/O solutions for applications in process control, medical systems, telecommunication and traffic control. A set of 16-position rotary switches allows easy configuration of VME Short I/O and Memory addresses. Interrupt routing from the IP slots to the VME IRQ s can be done in two ways: programmable by software or selection of predefined sets by a rotary switch. Four 50 pin 0.1 inch flat ribbon cable connectors mounted in the front panel of the TVME200 provide access to all IP I/O lines. Additional, on the TVME200-20R all I/O lines of IP D are routed to VME P2 and 14 user selectable I/O lines of IP C can be routed to VME P2 via a jumper field. Status indicators for IP access, +5V and +/-12V are provided. The IP power lines are fuse protected by self healing fuses and RF filtered. The operating temperature ranges between -40 C and +85 C. Technical Information Form Factor: VMEbus Board, 6U VMEbus Slave Interface: Short I/O: A16, D08/16, size: 1 Kbyte Standard memory: A24, D08/16 Size: programmable, 32 Kbytes to 2 Mbytes per IP Extended memory: A32, D08/16 Size: fixed, 8 Mbytes per IP Interrupts: IRQ1-7 ANSI/VITA compliant interface to IndustryPack modules IndustryPack slots: Four single-size or two double-size with front panel I/O 8 MHz interface, no DMA Routing of IP interrupt levels to VME IRQ1-7: programmable by software or selection of predefined sets by a rotary switch I/O access: 50 pin 0.1 inch flat ribbon cable connector per IP mounted in front panel Rear I/O of IP C and IP D (TVME200-20R only) Status LED s ACK LED for each IP module +5V Power LED for each IP slot +12V and 12V Power LED Self healing fuses and RF-filtering on all IP power lines Operating temperature 40 C to +85 C keeps the right to change technical specification without further notice. Issue

73 Order Information RoHS Compliant TVME200-10R 6U 4 Slot IndustryPack Carrier, 50 pin ribbon cable connectors (stacked version) TVME200-20R 6U 4 Slot IndustryPack Carrier, 50 pin ribbon cable connectors (stacked version), P2-I/O for IP-C/D For the availability of non-rohs compliant (leaded solder) products please contact TEWS. Documentation TVME200-DOC User Manual Software CARRIER-SW-42 VxWorks Software Support (Legacy and VxBus-enabled Software Support) CARRIER-SW-65 Windows IP Carrier Software Support CARRIER-SW-82 Linux IP Carrier Software Support CARRIER-SW-95 QNX IP Carrier Software Support For other operating systems please contact TEWS. Related Products TA305 Cable Kit for Modules with 50 pin ribbon cable connector keeps the right to change technical specification without further notice. Issue

74 TVME201 VMEbus Carrier for 4 IndustryPacks Application Information The TVME201 is 6U VMEbus Carrier for up to four singlesize or two double-size IndustryPack (IP) modules allowing to build up modular, flexible and cost effective I/O solutions for all kinds of applications like process control, medical systems, telecommunication and traffic control. For improved EMI protection, four HD50 SCSI-2 type connectors are mounted in the EMI front panel of the TVME201 and provide access to all IP I/O lines. Status indicators for IP access, +5V and +/-12V are provided in the front panel. A set of 16-position rotary switches allows easy configuration of VME Short I/O and Memory addresses. Interrupt routing from the IP slots to the VME IRQ s can be done in two ways: programmable by software or selection of predefined sets by a rotary switch. The IP power lines are fuse protected by self healing fuses and RF filtered. The operating temperature ranges between -40 C and +85 C. Technical Information Form Factor: VMEbus board, 6U VMEbus slave interface: Short I/O: A16, D08/16, size: 1 Kbytes Standard Memory: A24, D08/16, Size: programmable, 32 Kbytes to 2 Mbytes per IP Extended Memory: A32, D08/16, Size: fixed, 8 Mbytes per IP Interrupts: IRQ1-7 ANSI/VITA compliant interface to IndustryPack modules IndustryPack slots: Four single-size or two double-size with front panel I/O 8 MHz interface, no DMA Routing of IP Interrupt Levels to VME IRQ1-7: programmable by software or selection of predefined sets by a rotary switch I/O access by HD50 SCSI-2 type connector per IP mounted in EMI front panel EMI front panel Status LED s ACK LED for each IP module +5V Power LED for each IP slot +12V and 12V Power LED Self Healing fuses and RF-filtering on all IP power lines Operating Temperature 40 C to +85 C keeps the right to change technical specification without further notice. Issue

75 Order Information RoHS Compliant TVME201-10R 6U 4 Slot IndustryPack Carrier, HD50 connectors For the availability of non-rohs compliant (leaded solder) products please contact TEWS. Documentation TVME201-DOC User Manual Software CARRIER-SW-42 VxWorks Software Support (Legacy and VxBus-enabled Software Support) CARRIER-SW-65 Windows IP Carrier Software Support CARRIER-SW-82 Linux IP Carrier Software Support CARRIER-SW-95 QNX IP Carrier Software Support For other operating systems please contact TEWS. Related Products TA301 Cable Kit for Modules with HD50 Connector keeps the right to change technical specification without further notice. Issue

76 TVME202 VMEbus Carrier for 4 IndustryPacks Application Information The TVME202 is 6U VMEbus Carrier for up to 4 singlesize or 2 double-size IndustryPack (IP) modules provides modular, flexible and cost effective I/O solutions for applications in process control, medical systems, telecommunication and traffic control. A set of 16-position rotary switches allows easy configuration of VME Short I/O and Memory addresses. Interrupt routing from the IP slots to the VME IRQ s is programmable by software or can be selected from predefined sets by a rotary switch. Four 50 pin 0.1 inch flat ribbon cable connectors mounted on the TVME202 provide front I/O access to all IP I/O lines. Status indicators for IP access, +5V and +/-12V are provided. The IP power lines are fuse protected by self healing fuses and RF filtered. The operating temperature ranges between -40 C and +85 C. Technical Information Form Factor: VMEbus Board, 6U VMEbus Slave Interface: Short I/O: A16, D08/16, size: 1 Kbyte Standard memory: A24, D08/16 Size: programmable, 32 Kbytes to 2 Mbytes per IP Extended memory: A32, D08/16 Size: fixed, 8 Mbytes per IP Interrupts: IRQ1-7 ANSI/VITA compliant interface to IndustryPack modules IndustryPack slots: Four single-size or two double-size with front panel I/O 8 MHz interface, no DMA Routing of IP interrupt levels to VME IRQ1-7: programmable by software or selection of predefined sets by a rotary switch I/O access: 50 pin 0.1 inch flat ribbon cable connector per IP Status LED s ACK LED for each IP module +5V Power LED for each IP slot +12V and 12V Power LED Self healing fuses and RF-filtering on all IP power lines Operating temperature 40 C to +85 C keeps the right to change technical specification without further notice. Issue

77 Order Information RoHS Compliant TVME202-10R 6U 4 Slot IndustryPack Carrier, 50pin 180 ribbon cable connectors For the availability of non-rohs compliant (leaded solder) products please contact TEWS. Documentation TVME202-DOC User Manual Software CARRIER-SW-42 VxWorks Software Support (Legacy and VxBus-enabled Software Support) CARRIER-SW-65 Windows IP Carrier Software Support CARRIER-SW-82 Linux IP Carrier Software Support CARRIER-SW-95 QNX IP Carrier Software Support For other operating systems please contact TEWS. Related Products TA305 Cable Kit for Modules with 50 pin Ribbon Cable Connector keeps the right to change technical specification without further notice. Issue

78 TVME210 VMEbus Carrier for 2 IndustryPacks TVME210-10R TVME210-11R Application Information The TVME210 is a 3U VMEbus Carrier for up to two single-size or one double-size IndustryPack (IP) modules allowing to build up modular, flexible and cost effective I/O solutions for all kinds of applications like process control, medical systems, telecommunication and traffic control. Two 50 pin 0.1 inch flat ribbon cable connectors mounted in the front panel of the TVME210 provide access to all IP I/O lines. Status indicators for IP access, +5V and +/-12V are provided. A set of 16-position rotary switches allows easy configuration of VME Short I/O and Memory addresses. Interrupt routing from the IP slots to the VME IRQ s can be done in two ways: programmable by software or selection of predefined sets by a rotary switch. The IP power lines are fuse protected by self healing fuses and RF filtered. The operating temperature range is -40 C and +85 C. Technical Information Form Factor: VMEbus board, 3U VMEbus Slave Interface: Short I/O: A16, D08/16, size: 512 bytes Standard Memory: A24, D08/16 Size: programmable, 32 Kbytes to 4 Mbytes per IP or 2 Mbytes to 8 Mbytes for one IP Interrupts: IRQ1-7 ANSI/VITA compliant interface to IndustryPack modules IndustryPack slots: Two single-size or one double-size with front panel I/O 8 MHz interface, no DMA Routing of IP Interrupt Levels to VME IRQ1-7: programmable by software or selection of predefined sets by a rotary switch I/O access: 50 pin 0.1 inch flat ribbon cable connector (1x90, 1x180 ) per IP mounted in front panel Status LED s ACK LED for each IP module +5V Power LED for each IP slot +12V and 12V Power LED Self Healing fuses and RF-filtering on all IP power lines Operating Temperature 40 C to +85 C keeps the right to change technical specification without further notice. Issue

79 Order Information RoHS Compliant TVME210-10R 3U 2 Slot IndustryPack Carrier, 50pin ribbon cable connectors TVME210-11R 6U 2 Slot IndustryPack Carrier, 50pin ribbon cable connectors For the availability of non-rohs compliant (leaded solder) products please contact TEWS. Documentation TVME210-DOC User Manual Software CARRIER-SW-42 VxWorks Software Support (Legacy and VxBus-enabled Software Support) CARRIER-SW-65 Windows IP Carrier Software Support CARRIER-SW-82 Linux IP Carrier Software Support CARRIER-SW-95 QNX IP Carrier Software Support For other operating systems please contact TEWS. Related Products TA305 Cable Kit for Modules with 50 pin ribbon cable connector keeps the right to change technical specification without further notice. Issue

80 TVME211 VMEbus Carrier for 2 IndustryPacks Application Information The TVME211 is a 3U VMEbus Carrier for up to two single- size or one double-size IndustryPack (IP) modules allowing to build up modular, flexible and cost effective I/O solutions for all kinds of applications like process control, medical systems, telecommunication and traffic control. Two 50 pin 0.1 inch flat ribbon cable connectors mounted in the front panel of the TVME211 provide access to all IP I/O lines. A set of 16-position rotary switches allows easy configuration of VME Short I/O and Memory addresses. Interrupt routing from the IP slots to the VME IRQ s can be done in two ways: programmable by software or selection of predefined sets by a rotary switch. The IP power lines are fuse protected by self healing fuses and RF filtered. The operating temperature range is -40 C and +85 C. Technical Information Form Factor: VMEbus board, 3U VMEbus Slave Interface: Short I/O: A16, D08/16, size: 512 bytes Standard Memory: A24, D08/16, Size: programmable, 32 Kbytes to 4 Mbytes per IP or 2 Mbytes to 8 Mbytes for one IP Interrupts: IRQ1-7 ANSI/VITA compliant interface to IndustryPack modules IndustryPack slots: Two single-size or one double-size with front panel I/O 8 MHz interface, no DMA Routing of IP Interrupt Levels to VME IRQ1-7: programmable by software or selection of predefined sets by a rotary switch I/O access: 50 pin 0.1 inch flat ribbon cable connector (stacked version) per IP mounted in front panel Self Healing fuses and RF-filtering on all IP power lines Operating temperature 40 C to +85 C keeps the right to change technical specification without further notice. Issue

81 Order Information RoHS Compliant TVME211-10R 3U 2 Slot IndustryPack Carrier, 50pin ribbon cable connectors (stacked version) TVME211-11R 6U 2 Slot IndustryPack Carrier, 50pin ribbon cable connectors (stacked version) For the availability of non-rohs compliant (leaded solder) products please contact TEWS. Documentation TVME211-DOC User Manual Software CARRIER-SW-42 VxWorks Software Support (Legacy and VxBus-enabled Software Support) CARRIER-SW-65 Windows IP Carrier Software Support CARRIER-SW-82 Linux IP Carrier Software Support CARRIER-SW-95 QNX IP Carrier Software Support For other operating systems please contact TEWS. Related Products TA305 Cable Kit for Modules with 50 pin ribbon cable connector keeps the right to change technical specification without further notice. Issue

82 TVME220 VME64x Carrier for 4 IndustryPacks Application Information The TVME220 is a 6U VMEbus carrier for up to 4 singlesize or two double-size IndustryPack (IP) modules used to build modular, flexible and cost effective I/O solutions for applications in process control, medical systems, telecommunication and traffic control. The TVME220 uses VME64x-compliant connectors to increase the quantity of rear I/O connectivity beyond that of standard VME. All of the 200 I/O lines from the 4 IP slots are available at the VME64x connectors P0 and P2. The I/O mapping is compliant to the ANSI/VITA standard. Although the rear connectors are VME64x, the electrical interface is standard VME, so that nearly all CPU products still have full access to the IP modules mounted on the TVME220. Status indicators for IP access, +5V and +/-12V are provided in the EMI shielded front panel. A set of 16-position rotary switches allows easy configuration of VME Short I/O and memory addresses. Interrupt routing from the IP slots to the VME IRQ s can be done in two ways: programmable by software or selection of predefined sets by a rotary switch. The IP power lines are fuse protected by self healing fuses and RF filtered. The operating temperature ranges between -40 C and +85 C. TEWS two Transition Modules, TVME001-TM and TVME002-TM are available for easy access to all IP I/O lines. keeps the right to change technical specification without further notice. Issue

83 TVME220 VME64x Carrier for 4 IndustryPacks Application Information The TVME220 is a 6U VMEbus carrier for up to 4 singlesize or two double-size IndustryPack (IP) modules used to build modular, flexible and cost effective I/O solutions for applications in process control, medical systems, telecommunication and traffic control. The TVME220 uses VME64x-compliant connectors to increase the quantity of rear I/O connectivity beyond that of standard VME. All of the 200 I/O lines from the 4 IP slots are available at the VME64x connectors P0 and P2. The I/O mapping is compliant to the ANSI/VITA standard. Although the rear connectors are VME64x, the electrical interface is standard VME, so that nearly all CPU products still have full access to the IP modules mounted on the TVME220. Status indicators for IP access, +5V and +/-12V are provided in the EMI shielded front panel. A set of 16-position rotary switches allows easy configuration of VME Short I/O and memory addresses. Interrupt routing from the IP slots to the VME IRQ s can be done in two ways: programmable by software or selection of predefined sets by a rotary switch. The IP power lines are fuse protected by self healing fuses and RF filtered. The operating temperature ranges between -40 C and +85 C. TEWS two Transition Modules, TVME001-TM and TVME002-TM are available for easy access to all IP I/O lines. keeps the right to change technical specification without further notice. Issue

84 Technical Information Form Factor: VME64x-Board, 6U VME64 (ANSI/VITA ) and VME64x (ANSI/VITA ) compliant Slave Interface Short I/O: A16, D08/16, size: 1 Kbytes Standard Memory: A24, D08/16 Size: 32 Kbytes to 2 Mbytes per IP Extended Memory: A32, D08/16 Size: fixed, 8 Mbytes per IP Interrupts: IRQ1-7 ANSI/VITA compliant interface to IndustryPack modules IndustryPack slots: Four single-size or two double-size with back I/O via P0 and P2 8 MHz interface, no DMA Routing of IP Interrupt Levels to VME IRQ1-7: programmable by software or selection of predefined sets by a rotary switch ANSI/VITA compliant mapping of IP I/O lines to VME64x connectors P0 and P2 Status LED s: ACK LED for each IP module +5V Power LED for each IP slot +12V and 12V Power LED Self Healing fuses and RF-filtering on all IP power lines Operating temperature 40 C to +85 C keeps the right to change technical specification without further notice. Issue

85 Order Information RoHS Compliant TVME220-10R 6U 4 Slot IndustryPack Carrier, VME64x I/O on P0 and P2 For the availability of non-rohs compliant (leaded solder) products please contact TEWS. Documentation TVME220-DOC User Manual Software CARRIER-SW-42 VxWorks Software Support (Legacy and VxBus-enabled Software Support) CARRIER-SW-65 Windows IP Carrier Software Support CARRIER-SW-82 Linux IP Carrier Software Support CARRIER-SW-95 QNX IP Carrier Software Support For other operating systems please contact TEWS. Related Products TVME001-TM 6U Transition Module for VME64x IndustryPack Carrier, 50pin 180 ribbon cable connectors TVME002-TM 6U Transition Module for VME64x IndustryPack Carrier, HD50 connectors keeps the right to change technical specification without further notice. Issue

86 TVME230 PCI Expansion Card for 4 IndustryPack Application Information The TVME230 is a 6U Expansion Card for VMEbus CPU s with a PCI Expansion Connector like the TVME8240A, TVME8300, TVME8400, MVME5500, MVME5100, MVME3100, MVME2300 or MVME2400. It provides access to four single-size or two double-size IndustryPack (IP) modules via the PCI Expansion Connector. This adds 200 additional I/O lines to the CPU, used to build modular, flexible and cost effective I/O solutions for applications in process control, medical systems, telecommunication and traffic control. For improved EMI protection, four HD50 SCSI-2 type connectors are mounted in the EMI front panel of the TVME230 and provide access to all IP I/O lines. Status indicators for IP access, +5V and +/-12V are provided in the front panel. As an order option, the TVME230 is available with standard VME handles or IEEE1101 handles. The TVME230 can operate with 3.3V and 5.0V PCI I/O signaling voltage. All IP interrupt request lines are mapped to PCI INTA. For fast interrupt source detection, the TVME230 provides a special IP interrupt status register. The IP power lines are fuse protected by self healing fuses and RF filtered. The operating temperature range is -40 C to +85 C. keeps the right to change technical specification without further notice. Issue

87 Technical Information Form Factor: VMEbus board, 6U Board size: 160 mm x mm PCI 2.2 compliant interface PCI Interface : 33 MHz; 32 bit 5V and 3.3V PCI I/O signaling voltage ANSI/VITA compliant interface to IndustryPack modules IndustryPack slots: 4 single-size or 2 double-size IP Power: +5V, +12V and -12V are taken from the VMEbus backplane 8/32 MHz interface, no DMA 8 MByte memory space per IP Routing of all IP interrupts to PCI INTA, local interrupt status register I/O access: HD50 SCSI-2 type connector per IP, front panel I/O Status LED s ACK LED for each IP module +5V Power LED for each IP slot +12V and 12V Power LED Self Healing fuses and RF-filtering on all IP power lines Operating temperature -40 C to +85 C keeps the right to change technical specification without further notice. Issue

88 Order Information RoHS Compliant TVME230-10R 6U 4 Slot IndustryPack Expansion Card for VMEbus CPU's, IEEE1101 Handles TVME230-11R 6U 4 Slot IndustryPack Expansion Card for VMEbus CPU's, standard handles For the availability of non-rohs compliant (leaded solder) products please contact TEWS. Documentation TVME230-DOC User Manual Software CARRIER-SW-42 VxWorks Software Support (Legacy and VxBus-enabled Software Support) CARRIER-SW-65 Windows IP Carrier Software Support CARRIER-SW-82 Linux IP Carrier Software Support CARRIER-SW-95 QNX IP Carrier Software Support For other operating systems please contact TEWS. Related Products TA301 Cable Kit for Modules with HD50 Connector keeps the right to change technical specification without further notice. Issue

89 TVME001-TM Transition Module for VME64x Back I/O Application Information The TVME001-TM is a Transition Module for use with VME64x backplanes, providing easy and concise access to the I/O lines of back I/O IP carriers. It brings all 200 IP I/O lines from the VME64x P0 and P2 connectors out to four 50 pin ribbon cable connectors. The routing between the VME64x P0 and P2 connectors and the 4 ribbon cable connectors is ANSI/VITA compliant. The operating temperature ranges is -40 C and +85 C. Technical Information Form Factor: VME64x Rear Transition Module I/O Routing: ANSI/VITA compliant I/O mapping (P0 and P2) I/O lines are accessible via four 50 pin ribbon cable connectors No front panel Operating temperature: -40 C to +85 C Order Information RoHS Compliant TVME001-TM-10R 6U Transition Module for VME64x IndustryPack Carrier, 50pin 180 ribbon cable connectors For the availability of non-rohs compliant (leaded solder) products please contact TEWS. Documentation TVME001-TM-DOC User Manual keeps the right to change technical specification without further notice

90 TVME002-TM Transition Module for VME64x Back I/O Application Information The TVME002-TM is an 80mm, 6U Transition Module for use with VME64x backplanes, providing easy access to the I/O lines of back I/O IP carriers. It brings all 200 IP I/O lines from the VME64x P0 and P2 connectors out to four 50 pin SCSI-2 type connectors located in the EMI front panel. The routing between the VME64x P0 and P2 connectors and the 4 HD50 SCSI-2 type connectors in the EMI front panel is ANSI/VITA compliant. The operating temperature ranges between -40 C and +85 C. Technical Information Form Factor: VME64x 6U Rear Transition Module I/O Routing: ANSI/VITA compliant I/O mapping (P0 and P2) I/O lines are accessible via four HD50 SCSI-2 type connectors EMI front panel Operating temperature: -40 C to +85 C Order Information RoHS Compliant TVME002-TM-10R 6U Transition Module for VME64x IndustryPack Carrier, HD50 connectors For the availability of non-rohs compliant (leaded solder) products please contact TEWS. Documentation TVME002-TM-DOC User Manual keeps the right to change technical specification without further notice

91 PCI Modules PCI is the most widely-used computer board form factor and bus structure in the world of personal computer technology. With the introduction of high-reliability systems and ruggedized packaging, the use of standard PCI edge cards has spread widely into the industrial and COTS marketplaces. Demand for functionality such as serial communications, field bus, networking, analog and digital I/O, and motion control has increased. In addition to our well known PCI modules, we offer a complete line of CompactPCI, PCI Express, PCI Express Mini Card, VMEbus, PMC, XMC, PC104+, AMC, MicroTCA, FMC, and numerous IndustryPack modules off-theshelf. Software support for major operating systems such as Windows, Linux, Integrity, VxWorks, and QNX is available. All products feature a five-year warranty. If you wish to inquire about custom PCI designs, please contact TEWS directly at our offices in Germany or the United States. TEWS works closely with OEM and government customers to deliver accelerated time to market, long-term product availability and comprehensive product lifecycle management -- from the design stage through manufacturing, testing and beyond to post-sales support. For more information go to

92 TPCI100 PCI Carrier for 2 Industry Packs Application Information The TPCI100 is a standard 33 MHz 32 bit PCI Carrier for up to two single-size or one double-size IndustryPack (IP) modules allowing to build up modular, flexible and cost effective I/O solutions for all kinds of applications like process control, medical systems, telecommunication and traffic control. Two 50 pin 0.1 inch flat ribbon cable connectors provide access to all IP I/O lines. Status indicators for IP access, +5V and +/-12V are provided. The TPCI100 can operate with 3.3V and 5.0V PCI I/O signaling voltage for I/O. This guaranties compatibility with nearly all PC mainboards. 3.3V required by on board logic is generated locally. All IP interrupt request lines are mapped to PCI INTA. For fast interrupt source detection, the TPCI100 provides a special IP interrupt status register. The IP power lines are fuse protected by self healing fuses and RF filtered. The operating temperature range is -40 C to +85 C. Software Support (CARRIER-SW-xx) for different operating systems is available. keeps the right to change technical specification without further notice

93 Technical Information PCI Card Interface PCI 2.2 compliant interface Size: 107 mm x 125 mm PCI I/O signaling voltage: 3.3V or 5.0V ANSI/VITA compliant interface to IndustryPack modules IndustryPack slots: two single-size or one doublesize 8/32 MHz interface, no DMA 8 Mbytes memory space per IP Routing of all IP interrupts to PCI INTA, local interrupt status register. I/O access: 50 pin 0.1 inch flat ribbon cable connector per IP Status LED s ACK LED for each IP module +5V Power LED for each IP slot +12V and 12V Power LED Self Healing fuses and RF-filtering on all IP power lines Operating temperature 40 C to +85 C keeps the right to change technical specification without further notice

94 Order Information RoHS Compliant TPCI100-10R 2 Slot IndustryPack Carrier, 50 pin ribbon cable connectors For the availability of non-rohs compliant (leaded solder) products please contact TEWS. Documentation TPCI100-DOC User Manual Software CARRIER-SW-42 VxWorks Software Support (Legacy and VxBus-enabled Software Support) CARRIER-SW-65 Windows IP Carrier Software Support CARRIER-SW-82 Linux IP Carrier Software Support CARRIER-SW-95 QNX IP Carrier Software Support For other operating systems please contact TEWS. Related Products TA305 Cable Kit for modules with 50 pin ribbon cable connector keeps the right to change technical specification without further notice

95 TPCI200 PCI Carrier for 4 Industry Packs Application Information The TPCI200 is a standard 33 MHz 32 bit PCI Carrier for up to four single-size or two double-size IndustryPack (IP) modules used to build modular, flexible and cost effective I/O solutions for applications in process control, medical systems, telecommunication and traffic control. Four 50 pin 0.1 inch flat ribbon cable connectors provide access to all IP I/O lines. Status indicators for IP access, +5V and +/-12V are provided. The TPCI200 can operate with 3.3V and 5.0V PCI I/O signaling voltage for I/O. This guaranties compatibility with nearly all PC mainboards. 3.3V required by on board logic is generated locally. All IP interrupt request lines are mapped to PCI INTA. For fast interrupt source detection, the TPCI200 provides a special IP interrupt status register. The IP power lines are fuse protected by self healing fuses and RF filtered. The operating temperature range is -40 C to +85 C. Software Support (CARRIER-SW-xx) for different operating systems is available. Technical Information PCI Card Interface PCI 2.2 compliant interface Size: 107 mm x 270 mm PCI I/O signaling voltage: 3.3V or 5.0V ANSI/VITA compliant interface to IndustryPack modules IndustryPack slots: Four single-size or two double-size 8/32 MHz interface, no DMA 8 Mbyte memory space per IP Routing of all IP interrupts to PCI INTA, local interrupt status register. I/O access: 50 pin 0.1 inch flat ribbon cable connector per IP Status LED s ACK LED for each IP module +5V Power LED for each IP slot +12V and 12V Power LED Self Healing fuses and RF-filtering on all IP power lines Operating temperature -40 C to +85 C keeps the right to change technical specification without further notice

96 Order Information RoHS Compliant TPCI200-10R 4 Slot IndustryPack Carrier, 50 pin ribbon cable connectors For the availability of non-rohs compliant (leaded solder) products please contact TEWS. Documentation TPCI200-DOC User Manual Software CARRIER-SW-42 VxWorks Software Support (Legacy and VxBus-enabled Software Support) CARRIER-SW-65 Windows IP Carrier Software Support CARRIER-SW-82 Linux IP Carrier Software Support CARRIER-SW-95 QNX IP Carrier Software Support For other operating systems please contact TEWS. Related Products TA305 Cable Kit for modules with 50 pin ribbon cable connector keeps the right to change technical specification without further notice

97 Compact PCI Modules As part of our continued commitment to the embedded I/O market, TEWS TECHNOLOGIES has expanded development of I/O solutions based on the CompactPCI standard. The modules are designed for data communications, LAN/WAN networking, traffic control, simulation, telecommunication, and COTS applications. Our CompactPCI product line will offer comparable functionality to our PMC module product line. If you wish to inquire about custom cpci designs, please contact TEWS directly at our offices in Germany or the United States. In addition to our well known cpci modules, we offer a complete line of PMC, XMC, CompactPCI, PCI, PCI Express, PCI Express Mini Card, VMEbus, PC104+, AMC, MicroTCA, FMC, and numerous IndustryPack modules off-the-shelf. All TEWS modules feature a five-year limited warranty, and many are offered standard in extended temperature (-40 C to +85 C). Software drivers for VxWorks, Linux, QNX, Integrity and Windows are available. For more information go to

98 TCP201 CompactPCI Carrier for 4 IndustryPacks Application Information The TCP201 is a standard 6U CompactPCI Carrier with front I/O for up to four single-size or two double-size IndustryPack (IP) modules used to build modular, flexible and cost effective I/O solutions for applications in process control, medical systems, telecommunication and traffic control. For improved EMI protection, four HD50 SCSI-2 type connectors are mounted in the EMI front panel of the TCP201 and provide access to all IP I/O lines. Status indicators for IP access, +5V and +/-12V are provided in the front panel. The TCP201 can operate with 3.3V and 5.0V PCI I/O signaling voltage. All IP interrupt request lines are mapped to PCI INTA. For fast interrupt source detection, the TCP201 provides a special IP interrupt status register. The IP power lines are fuse protected by self healing fuses and RF filtered. The operating temperature range is -40 C to +85 C. The TCP201 complies with the PICMG 2.0 Revision 3.0 CompactPCI specification. Technical Information Standard 6U 32 bit CompactPCI module conforming to PICMG 2.0 Rev 3.0 PCI 2.2 compliant interface Board size: 160mm x mm PCI Interface : 33 MHz; 32 bit 5V and 3.3V PCI I/O signaling voltage ANSI/VITA compliant interface to IndustryPack modules IndustryPack slots: Four single-size or two double-size 8/32 MHz interface, no DMA 8 MByte memory space per IP Routing of all IP interrupts to PCI INTA, local interrupt status register I/O access: HD50 SCSI-2 type connector per IP, front panel I/O Status LED s ACK LED for each IP module +5V Power LED for each IP slot +12V and 12V Power LED Self Healing fuses and RF-filtering on all IP power lines Operating temperature -40 C to +85 C keeps the right to change technical specification without further notice

99 Order Information RoHS Compliant TCP201-10R 6U 4 Slot IndustryPack Carrier, HD50 connectors For the availability of non-rohs compliant (leaded solder) products please contact TEWS. Documentation TCP201-DOC User Manual Software CARRIER-SW-42 VxWorks IP Carrier Software Support (Legacy and VxBus-enabled Software Support) CARRIER-SW-65 Windows IP Carrier Software Support CARRIER-SW-82 Linux IP Carrier Software Support CARRIER-SW-95 QNX IP Carrier Software Support For other operating systems please contact TEWS. Related Products TA301 Cable Kit for Modules with HD50 Connector keeps the right to change technical specification without further notice

100 TCP211 CompactPCI Carrier for 2 IndustryPacks Application Information The TCP211 is a standard 3U CompactPCI carrier for up to two single-size or one double-size IndustryPack (IP) modules used to build modular, flexible and cost effective I/O solutions for applications in process control, medical systems, telecommunication and traffic control. Access to all IP I/O lines is provided by two 50 pin 0.1 inch flat ribbon cable connectors mounted in the front panel. The TCP211 can operate with 3.3V and 5.0V PCI I/O signaling voltage. All IP interrupt request lines are mapped to PCI INTA. For fast interrupt source detection, the TCP211 provides a special IP interrupt status register. The IP power lines are fuse protected by self healing fuses and RF filtered. The operating temperature range is -40 C to +85 C. The TCP211 complies with the PICMG 2.0 Revision 3.0 CompactPCI specification. Technical Information Standard 3U 32 bit CompactPCI module conforming to PICMG 2.0 Rev 3.0 PCI 2.2 compliant interface Board size: 160mm x 100mm PCI Interface : 33 MHz; 32 bit 5V and 3.3V PCI I/O signaling voltage ANSI/VITA compliant interface to IndustryPack modules IndustryPack slots: Two single-size or one double-size 8/32 MHz interface, no DMA 8 MByte memory space per IP Routing of all IP interrupts to PCI INTA, local interrupt status register I/O access: 50 pin 0.1 inch flat ribbon cable connector per IP mounted in front panel Self healing fuses and RF-filtering on all IP power lines Operating temperature -40 C to +85 keeps the right to change technical specification without further notice

101 Order Information RoHS Compliant TCP211-10R 3U 2 Slot IndustryPack Carrier, 50 pin ribbon cable connector (stacked version) For the availability of non-rohs compliant (leaded solder) products please contact TEWS. Documentation TCP211-DOC User Manual Software CARRIER-SW-42 VxWorks IP Carrier Software Support (Legacy and VxBus-enabled Software Support) CARRIER-SW-65 Windows IP Carrier Software Support CARRIER-SW-82 Linux IP Carrier Software Support CARRIER-SW-95 QNX IP Carrier Software Support For other operating systems please contact TEWS. Related Products TA305 Cable Kit for Modules with 50 pin Ribbon Cable Connector TCP001-FP 6U Front Panel Extension for 3U cpci Boards keeps the right to change technical specification without further notice

102 TCP213 CompactPCI Carrier for 2 IndustryPacks Application Information The TCP213 is a standard 3U CompactPCI carrier that provides back I/O for up to two single-size or one doublesize IndustryPack (IP) modules. It is used to build modular, flexible and cost effective I/O solutions for applications in process control, medical systems, telecommunication and traffic control. Access to all IP I/O lines is provided via J2. Status indicators for IP access, +5V and +/-12V are provided in the front panel. The TCP213 can operate with 3.3V and 5.0V PCI I/O signaling voltage. All IP interrupt request lines are mapped to PCI INTA. For fast interrupt source detection, the TCP213 provides a special IP interrupt status register. The IP power lines are fuse protected by self healing fuses and RF filtered. The operating temperature range is -40 C to +85 C. The TCP213 complies with the PICMG 2.0 Revision 3.0 CompactPCI specification. Technical Information 3U 32 bit CompactPCI module conforming to PICMG 2.0 Rev 3.0 PCI 2.2 compliant interface Board size: 160mm x 100mm PCI Interface : 33 MHz; 32 bit 5V and 3.3V PCI I/O signaling voltage ANSI/VITA compliant interface to IndustryPack modules IndustryPack slots: Two single-size or one double-size 8/32 MHz interface, no DMA 8 MByte memory space per IP Routing of all IP Interrupts to PCI INTA, local interrupt status register I/O access via J2 Status LED s ACK LED for each IP module +5V Power LED for each IP slot +12V and 12V Power LED Self Healing fuses and RF-filtering on all IP power lines Operating temperature -40 C to +85 C keeps the right to change technical specification without further notice

103 Order Information RoHS Compliant TCP213-10R 3U 2 Slot IndustryPack Carrier, rear I/O on J2 For the availability of non-rohs compliant (leaded solder) products please contact TEWS. Documentation TCP213-DOC User Manual Software CARRIER-SW-42 VxWorks IP Carrier Software Support (Legacy and VxBus-enabled Software Support) CARRIER-SW-65 Windows IP Carrier Software Support CARRIER-SW-82 Linux IP Carrier Software Support CARRIER-SW-95 QNX IP Carrier Software Support For other operating systems please contact TEWS. Related Products TCP010-TM TCP011-TM TCP001-FP 3U Transition Module for IndustryPack Carrier, 50pin ribbon cable connectors (rack internal) 3U Transition Module for IndustryPack Carrier, 50pin ribbon cable connectors (stacked version) 6U Front Panel Extension for 3U cpci Boards keeps the right to change technical specification without further notice

104 TCP220 CompactPCI Carrier for 4 IndustryPacks Application Information The TCP220 a standard 6U CompactPCI Carrier provides back I/O for up to four single-size or two double-size IndustryPack (IP) modules used to build modular, flexible and cost effective I/O solutions for applications in control, medical systems, telecommunication and traffic control. Access to all IP I/O lines is provided by a PICMG 2.4 R1.0 compliant I/O mapping via J4 and J5. Status indicators for IP access, +5V and +/-12V are provided in the front panel. The TCP220 can operate with 3.3V and 5.0V PCI I/O signaling voltage. Technical Information Standard 6U 32Bit CompactPCI module conforming to PICMG 2.0 Rev 3.0 PCI 2.2 compliant interface Board size: 160mm x mm PCI Interface : 33 MHz; 32 bit 5V and 3.3V PCI I/O signaling voltage ANSI/VITA compliant interface to IndustryPack modules IndustryPack slots: Four single-size or two double-size 8/32 MHz interface, no DMA 8 MByte memory space per IP All IP interrupt request lines are mapped to PCI INTA. For fast interrupt source detection, the TCP220 provides a special IP interrupt status register. The IP power lines are fuse protected by self healing fuses and RF filtered. The operating temperature range is -40 C to +85 C. The TCP220 complies with the PICMG 2.0 Revision 3.0 CompactPCI specification. Routing of all IP interrupts to PCI INTA, local interrupt status register I/O access: PICMG 2.4 R1.0 compliant via J4, J5 Status LED s ACK LED for each IP module +5V Power LED for each IP slot +12V and 12V Power LED Self Healing fuses and RF-filtering on all IP power lines Operating temperature -40 C to +85 keeps the right to change technical specification without further notice

105 Order Information RoHS Compliant TCP220-10R 6U 4 Slot IndustryPack Carrier, rear I/O on J4/J5 For the availability of non-rohs compliant (leaded solder) products please contact TEWS. Documentation TCP220-DOC User Manual Software CARRIER-SW-42 VxWorks IP Carrier Software Support (Legacy and VxBus-enabled Software Support) CARRIER-SW-65 Windows IP Carrier Software Support CARRIER-SW-82 Linux IP Carrier Software Support CARRIER-SW-95 QNX IP Carrier Software Support For other operating systems please contact TEWS. Related Products TCP001-TM TCP002-TM 6U Transition Module for IndustryPack Carrier, 50pin ribbon cable connectors (rack internal) 6U Transition Module for IndustryPack Carrier, HD50 connectors keeps the right to change technical specification without further notice

106 TCP001-TM Transition Module for 6U cpci IP Carrier Application Information The TCP001-TM is a Transition Module to be used with 6U cpci IP carrier, providing easy access to the IP I/O lines of cpci IP carrier with back I/O. It distributes all 200 IP I/O lines from the cpci RJ4 and RJ5 connector to four 50 pin ribbon cable connectors allowing easy rack internal wiring. The routing between the cpci RJ4 and RJ5 connector and the four ribbon cable connectors is PICMG 2.4 R1.0 compliant. The TCP001-TM has no front panel. The operating temperature range is -40 C to +85 C. Technical Information Form Factor: cpci Rear Transition Module I/O Routing: PICMG 2.4 R1.0 compliant I/O mapping (RJ4 and RJ5) I/O lines are accessible via four 50 pin ribbon cable connectors No front panel Operating temperature: -40 C to +85 C Order Information RoHS Compliant TCP001-TM-10R 6U Transition Module for IndustryPack Carrier, 50pin ribbon cable connectors (rack internal) For the availability of non-rohs compliant (leaded solder) products please contact TEWS. Documentation TCP001-TM-DOC User Manual keeps the right to change technical specification without further notice

107 TCP002-TM Transition Module for 6U cpci IP Carrier Application Information The TCP002-TM is a 6U Transition Module to be used with 6U cpci IP carrier, providing easy access to the IP I/O lines of cpci IP carrier with back I/O. It distributes all 200 IP I/O lines from the cpci RJ4 and RJ5 connector to four 50 pin SCSI-2 type connectors located in the EMI front panel. The routing between the cpci RJ4 and RJ5 connector and the four SCSI-2 type connectors in the EMI front panel is PCIMG 2.4 R1.0 compliant. The operating temperature range is -40 C to +85 C. Technical Information Form Factor: cpci 6U Rear Transition Module (233mm x 80mm) I/O Routing: PICMG 2.4 R1.0 compliant I/O mapping (RJ4 and RJ5) I/O lines are accessible via four HD50 SCSI-2 type connectors EMI front panel Operating temperature: -40 C to +85 C Order Information RoHS Compliant TCP002-TM-10R 6U Transition Module for IndustryPack Carrier, HD50 connectors For the availability of non-rohs compliant (leaded solder) products please contact TEWS. Documentation TCP002-TM-DOC User Manual keeps the right to change technical specification without further notice

108 TCP010-TM Transition Module for 3U cpci IP Carrier Application Information The TCP010-TM is a Transition Module to be used with 3U cpci IP carrier, providing easy access to the IP I/O lines of cpci IP carrier with back I/O. It distributes all 100 IP I/O lines from the cpci RJ2 connector to two 50 pin ribbon cable connectors allowing easy rack internal wiring. The TCP010-TM has no front panel. The operating temperature range is -40 C to +85 C. Technical Information Form Factor: cpci 3U Rear Transition Module I/O Routing: I/O lines are accessible via two 50 pin ribbon cable connectors No front panel Operating temperature: -40 C to +85 C Technical Information RoHS Compliant TCP010-TM-10R 3U Transition Module for IndustryPack Carrier, 50pin ribbon cable connectors (rack internal) For the availability of non-rohs compliant (leaded solder) products please contact TEWS. Documentation TCP010-TM-DOC User Manual keeps the right to change technical specification without further notice

109 TCP011-TM Transition Module for 3U cpci IP Carrier Application Information The TCP011-TM is a 3U Transition Module to be used with 3U cpci IP carrier, providing easy access to the IP I/O lines of cpci IP carrier with back I/O. It distributes all 100 IP I/O lines from the cpci RJ2 connector to two 50 pin ribbon cable connectors (stacked version) located in the front panel. The operating temperature range is -40 C to +85 C. Technical Information Form Factor: cpci 3U Rear Transition Module (100mm x 80mm) I/O Routing: I/O lines are accessible via two 50 pin ribbon cable connectors Front panel Operating temperature: -40 C to +85 C Order Information RoHS Compliant TCP011-TM-10R 3U Transition Module for IndustryPack Carrier, 50pin ribbon cable connectors (stacked version) For the availability of non-rohs compliant (leaded solder) products please contact TEWS. Documentation TCP011-TM-DOC User Manual keeps the right to change technical specification without further notice

110 AMC Modules Advanced Mezzanine Card (AdvancedMC) AMC is a PCI Industrial Computer Manufacturers Group specification (PICMG AMC.0 and PICMG AMC.x, respectively) for hotswappable and field-replaceable mezzanine cards. AdvancedMC represents the industries next generation mezzanine standard. In addition to providing hot swap capability, intelligent platform management (IPMI), greater potential power/size, and the other enhancements made possible by AdvancedTCA, AdvancedMC is intended to help customers take advantage of the performance enhancements of new, fast, wide-bandwidth serial buses, including PCI Express. TEWS Technologies is expanding its industry leading embedded I/O product line to support the next-generation open-architecture standard. With its background and log-term experience in interface products based on IndustryPack, PMC, XMC, CompactPCI, PCI, PCI Express, PCI Express Mini Card, VMEbus, PC104+, AMC, MicroTCA, and FMC industrial standards. TEWS is growing its product range with the introduction of AMC (Advanced Mezzanine Card) modules. AMCs are designed to work on a carrier card (primarily AdvancedTCA) and can also be plugged into a backplane directly as defined by the MicroTCA specification. Especially the latter offers attractive possibilities for industrial grade COTS systems with improved Reliability, Availability, Serviceability and Performance. If you wish to inquire about custom VME designs, please contact TEWS directly at our offices in Germany or the United States. TEWS works closely with OEM and government customers to deliver accelerated time to market, longterm product availability and comprehensive product lifecycle management -- from the design stage through manufacturing, testing and beyond to post-sales support. All TEWS modules feature a five-year limited warranty, and many are offered standard in extended temperature (-40 C to +85 C). Software drivers for VxWorks, Linux, QNX, Integrity and Windows are available. For more information go to

111 TAMC002-TM MTCA.4 Rear-I/O µrtm for TAMC220 Application Information The TAMC002-TM is a standard Mid-Size/Full-Size MTCA.4 compliant Micro Rear Transition Module compatible to the TAMC220. Two AirmaxVS connectors provide access to all IP I/O lines of the TAMC220. The I/O lines are routed to three VHD68 SCSI-V connectors in the front panel and also to three 50-pin flat cable connectors that may be used for rack internal wiring or laboratory use. According to MTCA.4, the TAMC002-TM provides an I2C EEPROM, an I2C temperature sensor and an I2C I/O Extender device. The I/O Extender is used to provide various management signals on the µrtm, with the management being handled by the MMC of the TAMC220. Technical Information Form Factor: PICMG MTCA.4 Rear Transition Module Board size: Double Mid-Size or Double Full-Size MTCA.4 compatible IPMI support I/O Connectors: VHD68 SCSI-V (front panel) 50-pol. flat cable Front-Panel LEDs: Blue Hot-Swap LED Red Failure LED (LED1) Green Board OK LED (LED2) Operating temperature -40 C to +85 C MTBF (MIL-HDBK217F/FN2 G B 20 C) TAMC002-TM-xxR: h keeps the right to change technical specification without further notice

112 AirMax Connectors 50 I/Os 50 I/Os 50 I/Os 3 x 68 pin VHDCI Connector Order Information RoHS Compliant TAMC002-TM-10R TAMC002-TM-11R MTCA.4 Rear I/O µrtm for TAMC220, Double Mid-Size, 3 x VHD68 MTCA.4 Rear I/O µrtm for TAMC220, Double Full-Size, 3 x VHD68 For the availability of non-rohs compliant (leaded solder) products please contact TEWS. Documentation TAMC002-TM-DOC Related Products TA307 User Manual Cable Kit for modules with VHD68 connector keeps the right to change technical specification without further notice

113 TAMC100 Carrier for 1 IndustryPack Application Information The TAMC100 is a standard single width Mid-Size/Full-Size AMC.1 (PCI-Express) compliant carrier for one single-size IndustryPack (IP) module used to build modular, flexible and cost effective I/O solutions for applications in process control, medical systems, telecommunication and traffic control. A HD50 SCSI-2 type connector provides access to all IP I/O lines. The TAMC100 is a versatile solution to upgrade well known legacy I/O solutions to a high performance form factor. All IP interrupt request lines are mapped to PCIe INTA. Alternatively Message Signaled Interrupts (MSI) can be used. For fast interrupt source detection the TAMC100 provides a special IP interrupt status register. The IP power lines are fuse protected by self healing fuses and RF filtered. The operating temperature range is -40 C to +85 C. According to AMC.0, the TAMC100 provides an IPMI compliant Module Management Controller (MMC) with temperature monitoring and hot-swap support. The TAMC100 is available as mid-size module or as fullsize module. Please note that the mid-size module has restrictions to its usage because of a component height violation. It is within the responsibility of the user to carefully check if the mid-size module with its component height violation can be used in his system. Otherwise damage of the TAMC100 or its slot to be used in may occur! For more information see the user manual TAMC100-DOC. Technical Information Form Factor: PCIMG AMC.1 Module Board size: 180.6mm x 73.5mm Single width Mid-Size/Full-Size front panel Fabric Interface: PCIe single lane (x1) on AMC Port 4 (AMC.1 Type 1 compliant) IPMI V1.5 Support Front Panel LEDs: Blue Hot-Swap LED Red Fail LED (LED1) Green IP-Activity LED (LED 2) ANSI/VITA compliant interface to one IndustryPack module IndustryPack slot: one single-size 8/32 MHz interface, no DMA 8 Mbytes IP memory space Routing of all IP interrupts to PCIe INTA/MSI, local interrupt status register I/O access: HD50 SCSI-2 type connector Self Healing fuses and RF-filtering on all IP power lines Operating temperature: -40 C to +85 C MTBF (MIL-HDBK217F/FN2 G B 20 C): h keeps the right to change technical specification without further notice

114 Order Information RoHS Compliant TAMC100-10R AMC Carrier for 1 IndustryPack, Mid-Size front panel *) TAMC100-11R AMC Carrier for 1 IndustryPack, Full-Size front panel *) Please note that the mid-size module has restrictions to its usage because of a component height violation. It is within the responsibility of the user to carefully check if the mid-size module with its component height violation can be used in his system. Otherwise damage of the TAMC100 or its slot to be used in may occur! For more information see the user manual TAMC100-DOC For the availability of non-rohs compliant (leaded solder) products please contact TEWS. Documentation TAMC100-DOC User Manual Software CARRIER-SW-42 VxWorks Software Support (Legacy and VxBus-enabled Software Support) CARRIER-SW-65 Windows XP/XPE/2000 Software Support CARRIER-SW-82 Linux Software Support CARRIER-SW-95 QNX 6 Software Support For other operating systems please contact TEWS. Related Products TA301 Cable Kit for Modules with HD50 connector keeps the right to change technical specification without further notice

115 TAMC200 AMC Carrier for 3 IndustryPacks Application Information The TAMC200 is a standard double Mid-Size/Full-Size AMC.1 (PCI-Express) compliant carrier for up to three single-size or one double-size and one single-size IndustryPack (IP) modules used to build modular, flexible and cost effective I/O solutions for all kinds of applications like process control, medical systems, telecommunication and traffic control. Three VHD68 SCSI-V (VHDCI/Champ) type connectors provide access to all IP I/O lines. The TAMC200 is a versatile solution to upgrade well known legacy I/O solutions to a high performance form factor. All IP interrupt request lines are mapped to PCIe INTA, alternatively Message Signaled Interrupts (MSI) can be used. For fast interrupt source detection the TAMC200 provides a special IP interrupt status register. The IP power lines are fuse protected by self-healing fuses and RF filtered. The operating temperature range is -40 C to +85 C. According to AMC.0, the TAMC200 provides an IPMI compliant Module Management Controller (MMC) with temperature monitoring and hot-swap support. Technical Information Form Factor: PCIMG AMC.1 Module Board size: 180.6mm x 146.5mm Double Mid-Size or Full-Size front panel Fabric Interface: PCIe single lane (x1) on AMC Port 4 (AMC.1 Type 1 compliant) IPMI V1.5 Support Front Panel LEDs: Blue Hot-Swap LED Red Fail LED (LED1) Green Power Good / Activity LED (LED 2) ANSI/VITA compliant interface to three IndustryPack modules 3 IndustryPack slots: three single-size IPs or one single-size and one double-size IP 8/32 MHz interface, no DMA 8 Mbytes memory space per IP Slot Routing of all IP interrupts to PCIe INTA/MSI, local interrupt status register I/O access: VHD68 SCSI-V (VHDCI/Champ) type connector per IP Self-Healing fuses and RF-filtering on all IP power lines Operating temperature: -40 C to +85 C MTBF (MIL-HDBK217F/FN2 G B 20 C): h keeps the right to change technical specification without further notice

116 MMC IP-Slot A PCIe Bridge PCIe IP-Interface IP-Slot B IP-Slot C Order Information RoHS Compliant TAMC200-10R TAMC200-11R 3 Slot IndustryPack Carrier, Double Mid-Size*) 3 Slot IndustryPack Carrier, Double Full-Size *) Please note that the mid-size module has restrictions to its usage because of a component height violation. It is within the responsibility of the user to carefully check if the mid-size module with its component height violation can be used in his system. Otherwise damage of the TAMC200 or its slot to be used in may occur! For more information see the user manual TAMC200-DOC For the availability of non-rohs compliant (leaded solder) products please contact TEWS. Documentation TAMC200-DOC User Manual Software CARRIER-SW-42 VxWorks Software Support (Legacy and VxBus-enabled Software Support) CARRIER-SW-65 Windows Software Support CARRIER-SW-82 Linux Software Support CARRIER-SW-95 QNX Software Support For other operating systems please contact TEWS. Related Products TA307 Cable Kit for Modules with VHD68 Connector keeps the right to change technical specification without further notice

117 TAMC220 3 Slot IndustryPack Carrier for MTCA.4 Rear-I/O Application Information The TAMC220 is a standard double Mid-Size/Full-Size AMC.1 (PCI-Express) and MTCA.4 compliant carrier for up to three single-size, or one double-size and one singlesize IndustryPack (IP) modules. It can be used to build modular, flexible and cost effective I/O solutions for all kinds of applications like process control, medical systems, telecommunication and traffic control. The TAMC220 is a versatile solution to upgrade well known legacy I/O solutions to a high performance form factor. Two AirMaxVS connectors provide access to all IP I/O lines via a compatible µrtm, such as the TAMC002-TM. The IP power lines are protected by self-healing fuses and are RF filtered. The operating temperature range is -40 C to +85 C. According to AMC.0, the TAMC220 provides an IPMI compliant Module Management Controller (MMC) with temperature monitoring and hot-swap support. The TAMC220 is available as a mid-size module or as a full-size module. TCLKA and TCLKB are connected to the µrtm via M- LVDS transceivers. Both signals can be used as bidirectional single-ended signals. Technical Information Form Factor: PICMG MTCA.4 Module Board size: Double Mid-Size or Double Full-Size PCIe x1 Port (AMC.1 Type 1 compliant) IPMI V1.5 support Front-Panel LEDs: Blue Hot-Swap LED Red Failure LED (LED1) Green Board OK/Activity LED (LED2) Green ACKNOWLEDGE LED for each IP slot ANSI/VITA compliant interface to three IndustryPack modules 3 IndustryPack slots: three Single-Size IPs or one Single-Size and one Double-Size IP keeps the right to change technical specification without further notice. 8/32 MHz interface, no DMA 8 Mbytes memory space per IP Slot Routing of all IP interrupts to PCIe INTA/MSI, local interrupt status register Rear-I/O access to all 150 IP I/O lines via AirmaxVS 90-pos connectors to a compatible RTM (for example, TAMC002-TM) Self Healing fuses and RF-filtering on all IP power lines Operating temperature -40 C to +85 C MTBF (MIL-HDBK217F/FN2 G B 20 C) TAMC220-xxR: h