inductive proximity sensors ø4mm to M30 cylindrical Block form

Transcription

1 ø4mm to M30 cylindrical Block form

2 SCHÖNBUCH General information 334 ø4 to ø Standard 336 M18 - M30 Standard 33 - M30 Extended range M30 Namur M30 Full metal 3 - M30 High temperature 341 Block form 342

3 STANDARDS Schonbuch Proximity switches are constructed to Cenelec and DIN norms specified below. For 3 lead : DIN EN TECHNICAL SPECIFICATIONS For NAMUR : DIN EN NAMUR Protection: Inductive-to IP6 Insulation class II Refer also to VDE 0660 part Contact free detection NPN or PNP open collector output indicator FEATURES Rugged construction Short-circuit and reverse polarity protection (Where applicable) High speed switching Oil resistant cable Nominal sensing distance Sn: See appropriate sensor ± % Actual sensing distance Sr: 0.9 Sn Sr 1.1Sn Usable sensing distance S: 0.9 Sr S 1.1 Sr SPECIFICATIONS TO DIN AND CENELEC Reduction multiplier: Copper 0.4, Aluminium 0., Brass 0.5, Stainless steel 0.85, Chromenickel 0.9 Hysteresis H: 3-15% Temperature range: -25 c to +0 c Shock: b 30g, t 11ms Vibration: f 55Hz, A 1mm Protection class - Inductive: IP6 Metal body: - Nickel plated brass MATERIAL 3 Wire Connections CONNECTIONS Namur Connections PNP N/O BN (1) BK (4) BL (3) PNP N/C BN (1) BK (2) BL (3) NPN N/O BN (1) BK (4) BL (3) NPN N/C BN (1) BK (2) BL (3) BROWN BLUE Flush types INSTALLATION NOTES Non - Flush types >2di di di di 3sn Metal Target Metal di >3di di >3sn >2sn >3di di Metal Target Metal Flush type switches will not be affected by surrounding metal, but must not be installed closer than 2 x di Non flush types must not have metal next to the active face of the switch, and must not be installed closer than 3 x di MINIMUM DISTANCES FOR REPEATABLE SWITCHING Ref: Europa Norm EN 500 HYSTERESIS D D 2xD Ø Sensor (D) Sn 2 De-activated Activated Ø D Sn For precise repeatable switching in applications where there is more than one target to detect, the target should equal the diameter of the switch (D) and the distance between targets should be 2 x (D) Hysteresis is the difference between activated point and de-activated point of a proximity switch. The usable "Safe" switching distance for a proximity switch is 0.81 x Sn (Sensing distance).. k

4 Ø4 Ø6.5 MINIATURE SENSORS 0.8 2mm sensing Range Cable and connector type Indication PNP & NPN types available N/O & N/C types available mm Size Non Flush Connection Supply (Max) Load Ind Type Output Part Number 0.8 Ø4 Standard Cable Type Flush 3 Wire -35V 2KHz 0mA 1 PNP N/O IBDA m N/C IBDA NPN N/O IBDA 0412 N/C IBDA Ø4 Standard Connector Type Flush Plug in -35V 2KHz 150mA 1 PNP N/O IBMD M 8 N/C IBMD Pin NPN N/O IBMD 0412 N/C IBMD M5X0.5 Standard Cable Type Flush 3 Wire -35V 2KHz 150mA 1 PNP N/O IBCA m N/C IBCA 0515 SW 3 M5 x 0,5 NPN N/O IBCA 0512 N/C IBCA M5X0.5 Standard Connector Type Flush Plug in -35V 2KHz 150mA 1 PNP N/O IBLD 0514 SW M5 x 0,5 N/C IBLD Pin NPN N/O IBLD 0512 N/C IBLD Ø6.5 Standard Cable Type Flush 3 Wire -35V 5KHz 200mA 1 PNP N/O ICDA m N/C ICDA 6515 NPN N/O ICDA 6512 N/C ICDA Ø6.5 Standard Cable Type Non Flush 3 Wire -35V 5KHz 200mA 1 PNP N/O INDA m N/C INDA 6515 NPN N/O INDA 6512 N/C INDA Ø6.5 Standard Connector Type Flush Plug in -35V 5KHz 200mA 1 PNP N/O IDMD N/C IDMD Pin NPN N/O IDMD 6512 N/C IDMD Ø6.5 Standard Connector Type Non Flush Plug in -35V 5KHz 200mA 1 PNP N/O IOMD N/C IOMD Pin NPN N/O IOMD 6512 N/C IOMD 6513

5 - STANDARD SENSORS 1.5 4mm sensing distance Cable and connector types indication PNP and NPN types available N/O and N/C types available mm Size Non Flush Connection Supply (Max) Load Ind Type Output Part Number 1.5 X1 Standard Cable Type Flush 3 Wire -35V 2KHz 200mA 1 PNP N/O ICCA m N/C ICCA 0815 x 1 NPN N/O ICCA 0812 N/C ICCA X1 Standard Cable Type Non Flush 3 Wire -35V 2KHz 200mA 1 PNP N/O INCA m N/C INCA 0815 x 1 NPN N/O INCA 0812 N/C INCA X1 Standard Connector Type Flush Plug in -35V 2KHz 200mA 1 PNP N/O ICLD x 1 M 8 N/C ICLD Pin NPN N/O ICLD 0812 N/C ICLD X1 Standard Connector Type Non Flush Plug in -35V 2KHz 200mA 1 PNP N/O INLD N/C INLD x 1 3 Pin NPN N/O INLD 0812 N/C INLD X1 Standard Cable Type Flush 3 Wire -35V 2KHz 200mA 1 PNP N/O ILCT m N/C ILCT 1215 SW1 x 1 NPN N/O ILCT 1212 N/C ILCT X1 Standard Cable Type Non Flush 3 Wire -35V 1KHz 200mA 1 PNP N/O IPCT m N/C IPCT 1215 SW1 11 NPN N/O IPCT 1212 N/C IPCT X1 Standard Connector Type Flush Plug in -35V 2KHz 200mA 1 PNP N/O ILLI 1214 SW x 1 N/C ILLI Pin NPN N/O ILLI 1212 N/C ILLI X1 Standard Connector Type Non Flush Plug in -35V 1KHz 200mA 1 PNP N/O IPLI 1214 SW x 1 N/C IPLI Pin NPN N/O IPLI 1212 N/C IPLI 1213

6 M18 M30 STANDARD SENSORS 5 15mm sensing Range Cable and connector type Indication PNP & NPN types available N/O & N/C types available mm Size Non Flush Connection Supply (Max) Load Ind Type Output Part Number 5 M18X1 Standard Cable Type Flush 3 Wire -35V 1KHz 200mA 1 PNP N/O ILCT m N/C ILCT 1815 NPN N/O ILCT 1812 N/C ILCT M18X1 Standard Cable Type Non Flush 3 Wire -35V 500Hz 200mA 1 PNP N/O IPCT m N/C IPCT 1815 NPN N/O IPCT 1812 N/C IPCT M18X1 Standard Connector Type Flush Plug in -35V 1KHz 200mA 1 PNP N/O IBLI 1814 SW N/C IBLI Pin NPN N/O IBLI 1812 N/C IBLI M18X1 Standard Connector Type Non Flush Plug in -35V 500Hz 200mA 1 PNP N/O INLI ,5 N/C INLI Pin NPN N/O INLI 1812 N/C INLI 1813 M30X1.5 Standard Cable Type Flush 3 Wire -35V 250Hz 200mA 1 PNP N/O IBCT m N/C IBCT 3015 NPN N/O IBCT 3012 N/C IBCT M30X1.5 Standard Cable Type Non Flush 3 Wire -35V 150Hz 200mA 1 PNP N/O INCT m N/C INCT 3015 NPN N/O INCT 3012 N/C INCT 3013 M30X1.5 Standard Connector Type Flush Plug in -35V 250Hz 200mA 1 PNP N/O IBLI N/C IBLI Pin NPN N/O IBLI 3012 N/C IBLI M30X1.5 Standard Connector Type Non Flush Plug in -35V 150Hz 200mA 1 PNP N/O INLI N/C INLI Pin NPN N/O INLI 3012 N/C INLI 3013

7 - M30 EXTENDED RANGE SENSORS 3 mm sensing distance 2m Cable indication PNP & NPN types available N/O & N/C types available mm Size Non Flush Connection Supply (Max) Load Ind Type Output Part Number 3 X1 Extended Range Flush 3 Wire -30V 1KHz 200mA 1 PNP N/O IC3CA m N/C IC3CA 0815 x 1 NPN N/O IC3CA 0812 N/C IC3CA X1 Extended Range Non Flush 3 Wire -30V 1KHz 200mA 1 PNP N/O IN6CA m N/C IN6CA 0815 x 1 NPN N/O IN6CA 0812 N/C IN6CA X1 Extended Range Flush 3 Wire -35V 500Hz 200mA 1 PNP N/O IL6CT m N/C IL6CT 1215 SW1 x 1 800Hz NPN N/O IL6CT 1212 N/C IL6CT 1213 X1 Extended Range Non Flush 3 Wire -35V 0Hz 200mA 1 PNP N/O IPCT m N/C IPCT 1215 SW1 11 NPN N/O IPCT 1212 N/C IPCT M18X1 Extended Range Flush 3 Wire -35V 300Hz 200mA 1 PNP N/O IL12CT m N/C IL12CT 1815 NPN N/O IL12CT 1812 N/C IL12CT M18X1 Extended Range Non Flush 3 Wire -35V 0Hz 200mA 1 PNP N/O IP20CT m N/C IP20CT NPN N/O IP20CT 1812 N/C IP20CT M30X1,5 Extended Range Flush 3 Wire -35V 0Hz 200mA 1 PNP N/O IB22CT m N/C IB22CT 3015 NPN N/O IB22CT 3012 N/C IB22CT 3013 M30X1,5 Extended Range Non Flush 3 Wire -35V 0Hz 200mA 1 PNP N/O INCT m N/C INCT 3015 NPN N/O INCT 3012 N/C INCT 3013

8 - M30 NAMUR SENSORS mm sensing Range 2m Cable Indication Current Sn Flush/ Frequency Requirements mm Size Non Flush Connection Supply (Max) Damp Undamp Part Number 1.5 X1 Namur Flush 3 Wire, to 9V 5KHz < 0,8mA > 2,5mA ICAA x 1 2 X1 Namur Non Flush 3 Wire, to 9V 5KHz < 0,8mA > 2,5mA INAA x 1 2 X1 Namur Flush 3 Wire, to 9V 2KHz < 0,8mA > 2,5mA IBAT X1 Namur Non Flush 3 Wire, to 9V 2KHz < 0,8mA > 2,5mA INAT M18X1 Namur Flush 3 Wire, to 9V 1KHz < 0,8mA > 2,5mA IBAT M18X1 Namur Non Flush 3 Wire, to 9V 1KHz < 0,8mA > 2,5mA INAT 1808 M30X1 Namur Flush 3 Wire, to 9V 500Hz < 0,8mA > 2,5mA IBAT M30X1 Namur Non Flush 3 Wire, to 9V 500Hz < 0,8mA > 2,5mA INAT m Ri = 1kΩ 12

9 - M30 FULL METAL SENSORS 2 mm sensing distance Cable & connector type indication PNP N/O output mm Size Non Flush Connection Supply (Max) Load Type Output Part Number 2 X1 Full Metal Cable Type Flush 3 Wire -35V 20Hz 150mA PNP N/O IGAA SW1 x1 2 X1 Full Metal Connector Type Flush Plug in -35V 20Hz 150mA PNP N/O IGII Pin SW1 x1 5 M18X1 Full Metal Cable Type Flush 3 Wire -35V 20Hz 150mA PNP N/O IGAA M18X1 Full Metal Connector Type Flush Plug in -35V 20Hz 150mA PNP N/O IGII Pin SW22 M18x1 M30X1 Full Metal Cable Type Flush 3 Wire -35V 20Hz 150mA PNP N/O IGAA M30 x 1 M30X1 Full Metal Connector Type Flush Plug in -35V 20Hz 150mA PNP N/O IGII Pin M30x1

10 - M30 HIGH TEMPERATURE SENSORS 2 15mm sensing distance 2m Cable Indication PNP N/O output mm Size Non Flush Connection Supply (Max) Load Type Output Part Number 2 X1 Flush 3 Wire -30V 1kHz 120mA PNP N/O IC2AC 0814 High Temp - C to +1 C 2m x 1 3 X1 Flush 3 Wire -30V 500Hz 120mA PNP N/O IC3AC 1214 High Temp - C to +150 C 2m 6 0 SW1 x 1 5 M18X1 Flush 3 Wire -30V 200Hz 120mA PNP N/O IBAC 1814 High Temp - C to +180 C 2m M18X1 Non Flush 3 Wire -30V 150Hz 120mA PNP N/O INAC 1814 High Temp - C to +180 C 2m 83 0 M30X1.5 Flush 3 Wire -30V 0Hz 120mA PNP N/O IBAC 3014 High Temp - C to +180 C 0 2m 6 15 M30X1.5 Non Flush 3 Wire -30V 50Hz 120mA PNP N/O INAC 3014 High Temp - C to +180 C 2m 80 6

11 BLOCK FORM SENSORS 1.5 4mm sensing distance Cable & connector types available Indication PNP N/O output mm Size Non Flush Connection Supply (Max) Load Type Output Part Number 1.5 x x 5 Cabled Flush 3 Wire -35V 5kHz 300mA PNP N/O ICDM M x 8 x 8 Cabled Flush 3 Wire -35V 5kHz 200mA PNP N/O ICDO 8814 M x 8 x 8 Connector Type Flush Plug in -35V 2kHz 200mA PNP N/O ICMD M3 3 Pin x 15.8 x.3mm Cable Type Non Flush 3 Wire -30V 0Hz 200mA PNP N/O INHT ,8,3 2, x 15.8 x.3mm Non Flush Plug in -30V 0Hz 200mA PNP N/O INRD 3814 Connector Type 15,8,3 3 Pin 2,8

12 BLOCK FORM SENSORS 8 30mm sensing distance Cable & connector types available Indication PNP N/O output mm Size Non Flush Connection Supply (Max) Load Type Output Part Number 8 50 x 25 x mm Cable Type Non Flush 3 Wire -35V 0Hz 200mA PNP N/O INHT x 25 x mm Connector Type Non Flush Plug in -35V 0Hz 200mA PNP N/O INRD Pin 4 x 26 x 12mm Cable Type Non Flush 3 Wire -35V 1kHz 200mA PNP N/O INHE M3 4 x 26 x 12mm Connector Type Non Flush Plug in -35V 1kHz 200mA PNP N/O INRD M3 3 Pin x x 118mm Screw Terminals Non Flush Screw -30V 0Hz 200mA PNP N/O INHK 14 PG 1 30 Terminals ,3