M18 Ultrasonic Sensor UK1

Transcription

1 TEHNIL DTSHEET Stainless steel ISI 36L or PBT body Models with digital or analogue (current or voltge) outputs Working area adjusting (window teach or on object teach) Multifunction LED indicator djustable hysteresis function in model with two digital outputs IP67 (EN 60529) Temperature compensated UL / cul ertified Options & Ordering odes NOTE: Not all possible options are customisable UK / E - 0 Body Style onnection Type body Body Size UK E Pre-cabled 2m M2 onnector Standard housing Housing Material Sensing Distance (Sn) Direct diffuse Direct diffuse Direct diffuse / metal housing Direct diffuse Sensitivity Teach-in button sensitivity adjustment D F E Output 0 0-0V Single output m Single output 4 NPN NO/N 4-20m 6 PNP NO/N 4-20m 7 PNP NO/N 0-0V Plastic housing Stainless steel housing ISI 36L (DIN.4404) 9 NPN NO/N 0-0V N P NPN NO/N Single output PNP NO/N Single output W PNP 2 x NO * M NPN 2 x NO * * The transition between the two functions takes place by pressing the teach-in button for over 8 seconds, until the status LED starts flashing fast, then upon releasing the button the flashing should slow. When the LED stops flashing, the function has changed. In the standard window function the state selection is done by reversing the wires on the plc controller (NO / N). See the Output curve section p

2 TEHNIL DTSHEET Specifications Models UK/E*-** UK/E*-** UKD/E*-** UKF/E*-0* Maximum sensing distance 400 () 900 (2) 600 / 50 metal housing (2) 2200 (2) Minimum sensing distance Sensing range / 200 metal housing / metal housing Beam angle ±8 ±7 ±8 / ±7 metal body ±7 Switching frequency (digital output) 0Hz 4Hz 2Hz / Hz metal body Hz Response time (digital output) 500ms 25ms Hysteresis % Repeat accuracy 0.5% Linearity error % Operating temperature Temperature compensation Operating voltage -20 to 60 Yes 5-30VD Thermal drift 7% Ripple 5% Leakage current Output voltage drop No-load current Output current (digital output) Minimum load resistance (analogue V out) djustable set point Time delay before availability (digital output) Time delay before availability (analogue output) Supply electrical protection Digital output electrical protections Enalogue output electrical protections 0 30VD 2.2 Vmax. (IL=00m) 50m 00m 3kΩ Teach-in button 250ms/500ms metal housing 500ms, 900ms (two digital output) 900ms Polarity reversal and transient Short circuit ( auto reset), Overvoltage pulses Overvoltage pulses EM In conformance to E Directive 2004/08/E requirements according to EN Protection degree IP67 (EN60529) (3) Housing material PBT/Stainless steel ISI 36L PBT Front end material Tightening torque Weight Storage temperature Epoxy glass resin 50Nm 500ms Plastic housing: 26g (connector exit), 88g (cable exit); Metal housing: 55g (connector exit), 25g (cable exit) -35 to 70 without freezing () Metal target 00 x 00 (2) Metal target 200 x 200 (3) IP rating guaranteed only with proper connection of a cable with similar rating or higher p2

3 TEHNIL DTSHEET Single digital output standard Dimension Function Distance Housing Output direct diffuse V m x PNP - NO/N x NPN - NO/N UK/E-0E UK/E2-0E UK/EP-0E UK/EN-0E M2 UK/E-0E UK/E2-0E UK/EP-0E UK/EN-0E connector UKD/E-0E UKD/E2-0E UKD/EP-0E UKD/EN-0E UKF/E-0E UKF/E2-0E UKF/EP-0E UKF/EN-0E plastic UK/E-0 UK/E2-0 UK/EP-0 UK/EN UK/E-0 UK/E2-0 UK/EP-0 UK/EN-0 cable UKD/E-0 UKD/E2-0 UKD/EP-0 UKD/EN UKF/E-0 UKF/E2-0 UKF/EP-0 UKF/EN-0 Double digital output standard Dimension Function Distance Housing Output direct diffuse 2 x PNP (hysteresys function standard window output) UK/EW-0E 2 x NPN (hysteresys function standard window output) UK/EM-0E M2 UK/EW-0E UK/EM-0E connector UKD/EW-0E UKD/EM-0E UKF/EW-0E UKF/EM-0E plastic UK/EW-0 UK/EM UK/EW-0 UK/EM-0 cable UKD/EW-0 UKD/EM UKF/EW-0 UKF/EM-0 UK/EW-E UK/EM-E M2 connector UK/EW-E UK/EM-E stainless UKD/EW-E UKD/EM-E steel ISI 36L UK/EW- UK/EM cable UK/EW- UK/EM UKD/EW- UKD/EM- Double digital output standard Dimension Function Distance Housing Output direct diffuse x PNP - NO/N x m x NPN - NO/N x m x PNP - NO/N x 0...0V x NPN - NO/N x 0...0V UK/E6-0E UK/E4-0E UK/E7-0E UK/E9-0E M2 UK/E6-0E UK/E4-0E UK/E7-0E UK/E9-0E connector UKD/E6-0E UKD/E4-0E UKD/E7-0E UKD/E9-0E UKF/E6-0E UKF/E4-0E UKF/E7-0E UKF/E9-0E plastic UK/E6-0 UK/E4-0 UK/E7-0 UK/E UK/E6-0 UK/E4-0 UK/E7-0 UK/E9-0 cable UKD/E6-0 UKD/E4-0 UKD/E7-0 UKD/E UKF/E6-0 UKF/E4-0 UKF/E7-0 UKF/E9-0 UK/E6-E UK/E4-E UK/E7-E UK/E9-E M2 connector UK/E6-E UK/E4-E UK/E7-E UK/E9-E stainless UKD/E6-E UKD/E4-E UKD/E7-E UKD/E9-E steel ISI 36L UK/E6- UK/E4- UK/E7- UK/E cable UK/E6- UK/E4- UK/E7- UK/E UKD/E6- UKD/E4- UKD/E7- UKD/E9- p3

4 TEHNIL DTSHEET onnection Drawings M2 Plug able exit & Pin numbers (M2 plug) PNP NO/N analogue output PNP double output Digital Output PNP NO/N with single digital output nalogue single output NPN NO/N analogue output NPN double output Digital Output NPN NO/N with single digital output BN = BU = BK = WH = Brown Blue Black White p4

5 TEHNIL DTSHEET Outputs Single digital NO N OUT OUT Single analogue V/m V/m NO N 0/20 0/20 0/4 0/4 Two digital outputs-standard window and adjustable hysteresis Digital analogue NO N = = First point to select = maximum selected distance Second point to select = minimum selected distance p5

6 TEHNIL DTSHEET Response Graphs UK/**-0* UK/**-* UK/**-** UKD/**-0* UKD/**-* UKF/**-** p6

7 TEHNIL DTSHEET Dimensions () UK*/**-0 UK*/**- UK*/**-0E UK*/**-E Ref: UK Errors and omissions excepted. Subject to change without notice.