Redefining confidence

Transcription

1 Outdoor Solution Roadway RoadFocus Redefining confidence Confident roadway solutions to help enhance liveability in your city or town.

2 Why should I change? D Philips Lumec

3 RoadFocus Roadway At a glance Enhance your roadways Chances are, you ve considered LED roadway lighting, but when weighing the familiar performance and appearance of traditional roadway lighting against newer technologies, you may wonder how LED lives up to your stringent standards. With new Philips Lumec RoadFocus LED Cobra Head Luminaires, you can now reliably upgrade to LED roadway lighting; saving energy, maintenance and operating costs, and contributing to environmental stewardship. At the same time, you ll benefit from performance surpassing that of high intensity discharge (HID) luminaires while retaining the familiar cobra head design. RoadFocus LED Luminaires offer more than an energy-efficient upgrade from traditional roadway lighting they provide confident solutions to help enhance liveability in your city or town. Philips.com/RoadFocus 1

4 Will people notice a change? 2 Philips Lumec

5 2012 DESIGN JOURNAL RoadFocus Roadway At a glance Surrounded by familiarity RoadFocus LED Luminaires have the same cobra head shape that people are used to seeing on roadways, so they effortlessly complement new areas and seamlessly retrofit into existing areas. With three sizes, a sleek, low-profile design, and many options, RoadFocus extends the same uniform aesthetic throughout all of your roadway applications. Familiar cobra head aesthetics by day Powerful W HID replacement illumination at night Seamless installation in new and existing areas across all roadway applications Optional stand-alone and connected outdoor LED lighting solutions further customize energy use and maximize the benefits of LED lighting Philips.com/RoadFocus 3

6 Is it expensive? Value: now and down the road In addition to enhanced light output with excellent uniformity, RoadFocus LED Luminaires can help to drive cost and workflow efficiencies. Our luminaires are favorably priced, and also easily retrofit into existing infrastructures so you only purchase what you need, when you need it. Customized financing plans are also available to comfortably suit your budgetary requirements. LED technology and advanced connected lighting solutions reduce energy costs Long luminaire useful life up to,000 hours (L70), enhanced ROI Customized financing plans Fast payback 4 Philips Lumec

7 Safeguarding your investment RoadFocus Roadway Value State-of-the-art LED technology found in RoadFocus LED Luminaires contributes even more efficiency by lowering energy costs without sacrificing performance, while long luminaire lifetimes reduce maintenance and operating costs. Returns on investment are further enhanced by incorporating our stand-alone and connected outdoor LED lighting solutions. From dimming that saves energy, to real-time alerts that enable quicker and more effective maintenance response, RoadFocus LED Luminaires with connected lighting solutions provide even greater savings. This is an ROI example you can achieve by retrofiting 5,000 HID luminaires with RoadFocus 74% 1, Annual savings over HID Metric tons of CO 2 eliminated annually Payback in years* + more Reduce lighting cost and increase energy savings by combining RoadFocus with connected lighting solutions You are saving energy and money with your new roadway solution! * Based on national average energy rate and other assumptions. Your specific case may vary. Contact Philips for more details and to help you determine your savings. Philips.com/RoadFocus 5

8 Where does it work? Local Road Luminaire: RFM Distribution: Type II Medium Major Road Luminaire: RFM Distribution: Type II Short Blankets of light RoadFocus LED Luminaires are the only roadway lighting solution you will need. They provide reliable and uniform LED illumination ranging from 70 to 400W HID replacement, while exceeding the performance of traditional lighting technologies. Now, your city or town can enjoy well-lit roadways and an increased sense of security that extends from small alleys to multi-lane expressways. Superior uniformity enhances visibility Precision optics direct more lighting to the roadway No uplight (U0 rating) for Dark Sky friendly lighting Field upgradable connected lighting solutions 6 Philips Lumec

9 Intersection Luminaire: RFS Distribution: Type II Short Collector Luminaire: RFM Distribution: Type III Medium RoadFocus Roadway Uses Freeway Luminaire: RFL Distribution: Type III Medium Intersection with Crosswalk Luminaire:RFM Distribution: Type III Short Intersection Luminaire: RFL Distribution: Type III Short Note: The luminaires and optical distributions shown are examples. Confirm which RoadFocus is right for you using a photometric layout of your application. At night, RoadFocus LED Luminaires come alive, blanketing your roadways with uniform, high-quality, white illumination, while avoiding the shadows and streaks that traditional roadway lighting can produce. The illumination is purposefully distributed to reduce light pollution and provide an increased sense of security, while our stand-alone and connected outdoor LED lighting solutions help to enhance your sustainability goals through dimming, programmed and wireless management options. Connected lighting solutions may be incorporated now, and can also be easily upgraded in the future as your requirements for controlling the lighting system evolve. Philips.com/RoadFocus 7

10 RoadFocus power Surge protection Standard SP1 and optional SP2 surge supressors protect the luminaire Mounting O.D. ( NPS) tenon for optimal mounting versatility -5 to +5 tilt in 2.5 steps Bird guard Standard with all RoadFocus luminaires Dimming driver The dimming driver (0-10V) is standard, enabling RoadFocus to be combined with additional controls, now or in the future Die-cast housing Rugged, die-cast aluminum housing for maximum durability Field Adjustable Wattage Selector Optional Field Adjustable Wattage Selector (FAWS) switch can be operated even while wearing Lineman s gloves, providing tactile, audible and visual switch position markers 8 Philips Lumec

11 RoadFocus Roadway Details Twist-lock receptacles The standard 5-pin and optional 7-pin NEMA twist lock receptacles facilitate connected lighting solutions that can quickly and easily be upgraded in the future Service tag Includes Service Tag, Philips innovative way to provide assistance throughout the life of the product. RoadFocus Service tag: IPTA IP66 Light engines Reliable light engines are IP66 sealed to protect against dust and moisture so that LED life is extended Shielding Optional House Side shields provide further glare control, and ensure light is only directed where it is needed Philips.com/RoadFocus 9

12 Where do we start? Change starts now The time is right to reliably upgrade your roadway lighting with RoadFocus LED Luminaires. Not only will you gain powerful and sustainable LED technology with enhanced, energy-saving connected lighting solutions in a familiar cobra head design, you can rest assured knowing that RoadFocus LED Luminaires are backed by our standard 10-year limited warranty. And by partnering with Philips, we can provide assistance throughout each step of your transition, from inspiration to installation. Available service options include: Project assessment Specification writing Design solutions Customer care and maintenance Project oversight and turn-key solutions Customized and competitive financing Standard 10-year limited warranty And much more 10 Philips Lumec

13 RoadFocus Roadway Technical Technical information Dimensions RoadFocus Small (RFS) RoadFocus Medium (RFM) RoadFocus Large (RFL) Side View Side View Side View 23.25" 591 mm 23.25" 591 mm mm mm 37.63" 37.63" mm mm 4.38" 111 mm 4.38" 111 mm mm 111 mm Bottom View 4.63" 4.63" mm mm Bottom View Bottom View RFS RFS mm mm Weight: 9.4 lbs EPA: 0.52 sq. ft. RFM RFM 11" 27911"mm 279 mm Weight: 12.2 lbs EPA: 0.53 sq. ft " 13.63" mm mm Weight: 27.3 lbs EPA: 0.92 sq. ft. Optical distributions RoadFocus offers many different optical distributions, providing the flexibility you need for all of your various roadway lighting needs. Plus, all optical distributions have a U0 rating which means no uplight (Dark Sky compliant) - all of the lighting is directed downward on the roadway where it is needed. ype IIType Short Type II Short (R2S) II Short (R2S)(R2S) Uplight Lumens Uplight Luminaire Lumens Luminaire Lumens Luminaire 45% 45% Type IIType Medium Type II Medium (R2M) II Medium (R2M)(R2M) Type III Type Short Type III Short (R3S) III Short (R3S)(R3S) Uplight Uplight Lumens Uplight Luminaire Lumens Luminaire Lumens Luminaire 34% 34% 45% 34% 34% 34% 22% 22% 22% 11% 11% 11% Uplight Uplighte Lumens Uplight Luminair e Lumens Luminair e Lumens Luminair 40% 40% 34% 26% 26% 26% 17% 17% 17% 9% 9% 9% Uplight % % % 20% 20% 20% 10% 10% 10% Back 0 Back Back 0 Front Back Front Back 0 Front Front Back 0 Front 0 Back Back 25% 25% 31% 31% 31% 20% 20% 20% 17% 17% 20% 20% 20% 13% 13% 13% 7% 7% 7% 8% 8% 8% Front Type III Medium (R3M) Front Front Back Back Back Front 10% Type IV (4) 0 0 Front 0 8% 17% 8% Back 17% 8% 17% 10% 25% 10% 25% Back 0 Back 0 0 Front Uplight Uplight Uplight Luminaire Luminaire Lumens Luminaire Lumens Lumens 27% 27% 27% 17% Front Front Front Back Back Back Front Front 34% 25% 0 Front Uplight 0 Type (5) Type V (5) V (5) TypeType IIIVShort (R3S) Uplight Uplight Uplight Luminaire Luminaire Lumens Luminaire Lumens Lumens 41% 41% 41% Back 25% Front Back 0 Back Back Type Type IVType (4) (4) IV (4) Type IIIV Medium (R2M) Uplight Uplight Uplight Luminaire Luminaire Lumens Luminaire Lumens Lumens 34% 34% 34% 0 Front Type Type III Type Medium III Medium Medium (R3M) (R3M) (R3M) Type II III Short (R2S) Uplight Lumens Uplight Luminaire Lumens Luminaire Lumens Luminaire 34% 34% 40% 00 Type III Type Medium Type III Medium III (R3M) Medium (R3M) (R Front Type V (5) Note: The optical distributions shown are examples of the RFM-72W32LED. Consult RoadFocus IES files for specific performance criteria. Philips.com/RoadFocus 11

14 Ordering information Ordering guide Prefix LED module Series Distribution Voltage Options Controls Luminaire Finish G2 RFS RoadFocus Roadway, small RFM RoadFocus Roadway, medium RFL RoadFocus Roadway, large 00K 25W16LED3K W16LED3K 35W16LED3K 45W16LED3K 54W16LED3K 00K 35W32LED3K 55W32LED3K 55W48LED3K 72W32LED3K W48LED3K 108W32LED3K 108W48LED3K 1W48LED3K 00K 145W64LED3K WLED3K 135WLED3K 1WLED3K 1W96LED3K 1W112LED3K 215W96LED3K 241W112LED3K 335W96LED3K 350W112LED3K 4000K 25W16LED4K W16LED4K 35W16LED4K 45W16LED4K 54W16LED4K 4000K 35W32LED4K 55W32LED4K 55W48LED4K 72W32LED4K W48LED4K 108W32LED4K 108W48LED4K 1W48LED4K 4000K 145W64LED4K WLED4K 135WLED4K 1WLED4K 1W96LED4K 1W112LED4K 215W96LED4K 241W112LED4K 335W96LED4K 350W112LED4K G2 Generation 2 Type 2 R2S Type II short (ASYM) R2M Type II Medium (ASYM) Type 3 R3S Type III short (ASYM) R3M Type III Medium (ASYM) Type 4 4 Type IV (ASYM) Type 5 5 Type V (SYMM) UNV V HVU 347-4V (RFM, RFL only) AST Pre-set driver for progressive start-up CDMGE25 8 hrs. 25% reduction CDMGE50 8 hrs. 50% reduction CDMGE75 8 hrs. 75% reduction CDMGM25 6 hrs. 25% reduction CDMGM50 6 hrs. 50% reduction CDMGM75 6 hrs. 75% reduction CDMGS25 4 hrs. 25% reduction CDMGS50 4 hrs. 50% reduction CDMGS75 4 hrs. 75% reduction CLO Pre-set driver to manage lumen depreciation DALI Digitally addressable lighting interface DMG 0-10V OTL Pre-set driver to signal end of life of the lamp API Factory installed NEMA label, ANSI C compliant FAWS Field adjustable wattage selector HS House Side Shield, shield, 1 per 16 LED light engine PH8 Twist-lock Photoelectric Cell, UNV ( VAC) PHXL Twist-lock Photoelectric Cell, extended life, UNV ( VAC) PH9 Shorting cap RCD Receptacle for twist-lock photocell or shorting cap, 5-pin (standard) RCD7 Receptacle for twist-lock photocell or shorting cap, 7-pin (optional) SP2 20kV / 20kA Surge Protector (optional) Textured BK Black BZ Bronze GY3 Gray WH White Prior to ordering, consult specification sheets on philips.com/luminaires for the most current information, notes, and exclusions. Luminaire Options HS House Side Shield PH8 Photocell PHXL Photocell, Extended Life PH9 Shorting Cap Luminaire Accessories Please note that accessories need to be ordered as separate line items, and they are quickly and easily installed in the field. See ordering guide on specification sheets for exact catalog logic. CPC CityTouch Connector Node 12 Philips Lumec

15 Controls RoadFocus Roadway Specifications Luminaire solutions Basic. Autonomous. Affordable. Simple, individual outdoor lighting dimming and management without the need for remote access. Dynadimmer Stand-alone Dimming Profile Field Adjustable Wattage Selector City solutions Advanced. Powerful. Extensive. Widespread or multi-site lighting management with detailed asset management that can grow along with your needs. CityTouch Connected Lighting System with CityTouch connector node Do you want more? You can enhance your connected lighting systems with the options below. Adjustable Start Up Time Constant Light Output Over the Life For more information Visit us at for more on Philips stand-alone and connected outdoor lighting solutions, and select Controls Outdoor, or request our outdoor lighting solutions brochure. Service tag Making LED maintenance operations easier and faster RoadFocus LED Cobra Head luminaires come standard with Philips Service tag, a unique QR based identification system placed on products, poles and boxes they are delivered in. After installing the luminaire, simply read the tag from the app to register the product. By registering the product, you are sure Philips will provide support throughout the lifetime of the product. Provides easy access to lighting component information at the right time and place. Enables more effective maintenance operations by identifying spare parts Take the next step See how Philips Lumec RoadFocus LED Cobra Head Luminaires can provide a complete solution for your roadway lighting needs. Contact your local Philips Sales Representative or visit for more information or to schedule a personalized demonstration. Philips.com/RoadFocus philips.com/roadfocus 13

16 2017 Philips Lighting Holding B.V. All rights reserved. Philips reserves the right to make changes in specifications and/or to discontinue any product at any time without notice or obligation and will not be liable for any consequences resulting from the use of this publication. PLu-1404BR 09/17 Philips Lighting North America Corporation 200 Franklin Square Drive Somerset, NJ Tel Philips Lighting Canada Ltd. 281 Hillmount Rd, Markham, ON, Canada L6C 2S3 Tel

17 Roadway RoadFocus Project: Location: Cat.No: Type: Lamps: Notes: Qty: RFL (large) The Philips Lumec RoadFocus LED Cobra Head luminaires feature a sleek design that provides seamless replacement of existing HID luminaires. RoadFocus is available in three sizes, offers multiple lumen packages, and a complete array of optical distributions, making it an outstanding solution for all types of roadway applications. Includes Service Tag, Philips innovative way to provide assistance throughout the life of the product. Ordering guide example: RFL-215W96LED4K-G2-R3M-UNV-DMG-RCD7-GY3 Series RFL LED module CCT Generation G2 Distribution Voltage Options Controls 4 Options Finish RFL RoadFocus Roadway, large 145W64LED 220W64LED 245W72LED 2W76LED WLED 135WLED 1WLED 270WLED 1W96LED 215W96LED 335W96LED 1W112LED 241W112LED 350W112LED 7 4K 4000k 3K 00k 2.7K k G2 Generation 2 Type 2 R2S Type II short (ASYM) R2M Type II Medium (ASYM) Type 3 R3S Type III short (ASYM) R3M Type III Medium (ASYM) Type 4 4 Type IV (ASYM) Type Type V (SYMM) UNV V HVU 347-4V DALI 1 Digitally addressable lighting interface DMG V SRD 1 Sensor ready driver, standard configuration SRD1 1 Sensor ready driver, alternate configuration 1 API Factory installed NEMA label, ANSI C compliant FAWS 7 Field adjustable wattage selector HS House Side Shield, shield, 1 per 16 LED light engine 1, 10 PH8 Twist-lock photoelectric cell, UNV ( VAC) PH8/347 10, 13 Twist-lock photoelectric cell (347VAC) PH8/4 10, 13 Twist-lock photoelectric cell (4VAC) 1, 10 PHXL Twist-lock photoelectric Cell, extended life, UNV ( VAC) PH9 10 Shorting cap RCD 3, 9 Receptacle for twist-lock photocell or shorting cap, 5-pin (optional) Textured BK Black BR Bronze GY3 Gray WH White RCD7 3, 5 Receptacle for twist-lock photocell or shorting cap, 7-pin (standard) SP2 20kV / 20kA Surge protector 1. Not available with HVU. 2. Not available with HS option. 3. Use of photoelectric cell or shorting cap is required to ensure proper illumination. 4. Select either DALI or DMG or SRD or SRD1 mandatory option. 5. Please note this integrated feature come standard with RoadFocus. 6. Only available with SRD or SRD1 Driver Options. 7. Only available with DMG Driver Options 9. Not available with SRD Driver Options. 10. Either RCD or RCD7 must be selected for this option. 11. Extended lead-time may apply. Consult factory. 12. FAWS table accuracy +/- 15% on these models. 13. Not available with UNV. RFL_Spec 07/18 page 1 of 5

18 RFL RoadFocus Large, LED Cobrahead Accessories (must be ordered as separate line items - quickly and easily installed in the field) Interact City Connector node * *Contact the factory for additional support when connected lighting or additional services are desired. Predicted Lumen Depreciation Data Predicted performance derived from LED manufacturer s data and engineering design estimates, based on IESNA LM- methodology. Actual experience may vary due to field application conditions.l 70 is the predicted time when LED performance depreciates to 70% of initial lumen output. Calculated per IESNA TM Published L 70 hours limited to 6 times actual LED test hours Ambient Temperature C Driver ma Calculated L 70 Hours L 70 per TM-21 Lumen Maintenance % at,000 hrs 25 C up to 1050 ma >,000 hours >,000 hours >88% LED Wattage values Ordering Code Total LEDs LED Current (ma) Average System Watts 14 Wattage label 15 RFL-145W64LED RFL-220W64LED RFL-245W72LED RFL-2W76LED RFL-WLED RFL-135WLED RFL-1WLED RFL-270WLED Ordering Code Total LEDs LED Current (ma) Average System Watts 14 Wattage label 15 RFL-1W96LED RFL-215W96LED RFL-335W96LED RFL-1W112LED RFL-241W112LED RFL-350W112LED Typical values, rounded. 15. As per ANSI C Consult factory for other labeling needs. LED Lumen values Type R2S Type R2M Type R3S Type R3M Type 4 Type 5 Color Lumen Efficacy Lumen Efficacy Lumen Efficacy Lumen Efficacy Lumen Efficacy Lumen Efficacy Ordering Code Temp. Output (LPW) Output (LPW) Output (LPW) Output (LPW) Output (LPW) Output (LPW) RFL-145W64LED , B3-U0-G2 17, B3-U0-G3 17, B2-U0-G3 17, B3-U0-G3 17, B3-U0-G3 17, B4-U0-G2 RFL-220W64LED , B3-U0-G2 23, B3-U0-G3 24, B3-U0-G4 23, B3-U0-G3 23, B3-U0-G4 24, B5-U0-G3 RFL-245W72LED , B3-U0-G3 26, B3-U0-G3 27, B3-U0-G4 26, B3-U0-G3 26, B3-U0-G4 27, B5-U0-G3 RFL-2W76LED , B4-U0-G3 28, B4-U0-G3 28,5 112 B3-U0-G4 27,6 109 B3-U0-G3 28, B3-U0-G4 28, B5-U0-G3 RFL-WLED , B3-U0-G2 11, B3-U0-G2 12,072 1 B2-U0-G2 11, B3-U0-G2 11, B2-U0-G2 12,079 1 B4-U0-G2 RFL-135WLED ,729 1 B3-U0-G2 17, B3-U0-G3 17, B2-U0-G3 16, B3-U0-G3 17, B3-U0-G3 17, B4-U0-G2 RFL-1WLED , B3-U0-G2 21, B3-U0-G3 21, B3-U0-G3 21,4 123 B3-U0-G3 21, B3-U0-G4 21, B5-U0-G3 RFL-270WLED 4000, B4-U0-G3 29, B4-U0-G3, B3-U0-G4 29, B4-U0-G4 29, B3-U0-G4, B5-U0-G4 RFL-1W96LED ,2 136 B3-U0-G2 20,337 1 B3-U0-G3 20, B3-U0-G3 20, B3-U0-G3 20,4 1 B3-U0-G4 20, B5-U0-G3 RFL-215W96LED ,876 1 B3-U0-G3 25, B3-U0-G3 25, B3-U0-G4 25, B3-U0-G3 25, B3-U0-G4 26, B5-U0-G3 RFL-335W96LED , B4-U0-G3 35, B4-U0-G4 36, B3-U0-G4 36, B4-U0-G4 35, B3-U0-G5 36, B5-U0-G4 RFL-1W112LED , B3-U0-G2 23, B3-U0-G3 23, B3-U0-G4 23, B3-U0-G3 23, B3-U0-G4 24,470 1 B5-U0-G3 RFL-241W112LED , B4-U0-G3, B4-U0-G3,2 125 B3-U0-G4, B4-U0-G4 29, B3-U0-G4, B5-U0-G4 RFL-350W112LED , B4-U0-G4 38, B4-U0-G4 38, B3-U0-G5 38, B4-U0-G4 38, B3-U0-G5 39, B5-U0-G4 Actual performance may vary due to installation variables including optics, mounting/ceiling height, dirt depreciation, light loss factor, etc.; highly recommended to confirm performance with a layout - contact Applications at outdoorlighting.applications@philips.com. Consult DLC QPL to confirm your specific fixture selection is DLC approved. Note: Some data may be scaled based on tests of similar but not identical luminaries.

19 RFL RoadFocus Large, LED Cobrahead LED Lumen values (continued) Ordering Code Color Lumen Efficacy Temp. Output (LPW) Type R2S Type R2M Type R3S Type R3M Type 4 Type 5 Lumen Efficacy Output (LPW) Lumen Efficacy Output (LPW) Lumen Efficacy Output (LPW) Lumen Efficacy Output (LPW) Lumen Efficacy Output (LPW) RFL-145W64LED 00 16, B3-U0-G2 16, B3-U0-G3 16, B2-U0-G3 16, B3-U0-G2 16, B2-U0-G3 16,4 121 B4-U0-G2 RFL-220W64LED 00 23, B3-U0-G2 22, B3-U0-G3 22, B3-U0-G3 22, B3-U0-G3 22, B3-U0-G4 22, B5-U0-G3 RFL-245W72LED 00 26, B3-U0-G3 25, B3-U0-G3 25, B3-U0-G4 24, B3-U0-G3 25, B3-U0-G4 25, B5-U0-G3 RFL-2W76LED 00 27, B3-U0-G3 26,3 104 B3-U0-G3 26, B3-U0-G4 26, B3-U0-G3 26, B3-U0-G4 26, B5-U0-G3 RFL-WLED 00 11, B3-U0-G2 11, B3-U0-G2 11, B2-U0-G2 11,1 120 B2-U0-G2 11, B2-U0-G2 11, B4-U0-G2 RFL-135WLED 00 16, B3-U0-G2 16, B3-U0-G3 16, B2-U0-G3 16, B3-U0-G2 16, B2-U0-G3 16, B4-U0-G2 RFL-1WLED 00 21, B3-U0-G2 20, B3-U0-G3 20, B3-U0-G3 20, B3-U0-G3 20, B3-U0-G4 20, B5-U0-G3 RFL-270WLED 00 28, B4-U0-G3 28, B4-U0-G3 28, B3-U0-G4 27, B3-U0-G3 27,3 104 B3-U0-G4 28, B5-U0-G3 RFL-1W96LED 00 20, B3-U0-G2 19,1 123 B3-U0-G3 19, B3-U0-G3 19, B3-U0-G3 19, B3-U0-G4 19, B5-U0-G3 RFL-215W96LED 00 25,3 123 B3-U0-G3 24, B3-U0-G3 24, B3-U0-G4 24, B3-U0-G3 24, B3-U0-G4 25, B5-U0-G3 RFL-335W96LED 00 35,2 109 B4-U0-G3 33,5 105 B4-U0-G4 34, B3-U0-G4 33, B4-U0-G4 33, B3-U0-G5 34, B5-U0-G4 RFL-1W112LED 00 23, B3-U0-G2 22, B3-U0-G3 22, B3-U0-G3 22, B3-U0-G3 22, B3-U0-G4 23, B5-U0-G3 RFL-241W112LED 00 29, B4-U0-G3 28, B4-U0-G3 28, B3-U0-G4 28, B3-U0-G3 28, B3-U0-G4 29, B5-U0-G3 RFL-350W112LED 00 37, B4-U0-G4 36, B4-U0-G4 36, B3-U0-G5 36, B4-U0-G4 36, B3-U0-G5 37, B5-U0-G4 Ordering Code Color Lumen Efficacy Temp. Output (LPW) Type R2S Type R2M Type R3S Type R3M Type 4 Type 5 Lumen Efficacy Output (LPW) Lumen Efficacy Output (LPW) Lumen Efficacy Output (LPW) Lumen Efficacy Output (LPW) Lumen Efficacy Output (LPW) RFL-145W64LED , B3-U0-G2 13, B3-U0-G2 13, B2-U0-G2 12,9 94 B3-U0-G2 12, B2-U0-G3 13, B4-U0-G2 RFL-220W64LED , B3-U0-G2 17, B3-U0-G3 17, B2-U0-G3 17, B3-U0-G3 17, B3-U0-G3 17, B4-U0-G2 RFL-245W72LED , B3-U0-G2 19, B3-U0-G3 20, B3-U0-G3 19, B3-U0-G3 19, B3-U0-G4 20, B5-U0-G3 RFL-2W76LED ,7 85 B3-U0-G2 21, B3-U0-G3 21, B3-U0-G3 20, B3-U0-G3 20, B3-U0-G4 21, B5-U0-G3 RFL-WLED ,315 B2-U0-G2 9, B2-U0-G2 9, B1-U0-G2 8, B2-U0-G2 8, B2-U0-G2 9, B3-U0-G2 RFL-135WLED , B3-U0-G2 12, B3-U0-G2 13, B2-U0-G2 12, B3-U0-G2 12, B2-U0-G3 13, B4-U0-G2 RFL-1WLED , B3-U0-G2 16,4 94 B3-U0-G3 16, B2-U0-G3 16, B3-U0-G2 16, B2-U0-G3 16, B4-U0-G2 RFL-270WLED , B3-U0-G2 22, B3-U0-G3 22, B3-U0-G3 21, B3-U0-G3 22, B3-U0-G4 22,4 84 B5-U0-G3 RFL-1W96LED , B3-U0-G2 15, B3-U0-G3 15, B2-U0-G3 15, B3-U0-G2 15, B2-U0-G3 15,3 101 B4-U0-G2 RFL-215W96LED , B4-U0-G3 19, B3-U0-G3 19, B3-U0-G3 19, B3-U0-G3 19, B3-U0-G4 19, B5-U0-G3 RFL-335W96LED , B4-U0-G3 26, B3-U0-G3 27, B3-U0-G4 26,9 83 B3-U0-G3 26,7 83 B3-U0-G4 27, B5-U0-G3 RFL-1W112LED , B3-U0-G2 17, B3-U0-G3 18, B2-U0-G3 17, B3-U0-G3 17, B3-U0-G3 18, B4-U0-G2 RFL-241W112LED , B3-U0-G2 22, B3-U0-G3 22, B3-U0-G3 22,6 93 B3-U0-G3 22, B3-U0-G4 23, B5-U0-G3 RFL-350W112LED 2700, B4-U0-G3 28, B4-U0-G3 29, B3-U0-G4 28, B3-U0-G4 28, B3-U0-G4 29, B5-U0-G4 Actual performance may vary due to installation variables including optics, mounting/ceiling height, dirt depreciation, light loss factor, etc.; highly recommended to confirm performance with a layout - contact Applications at outdoorlighting.applications@philips.com. Consult DLC QPL to confirm your specific fixture selection is DLC approved. Note: Some data may be scaled based on tests of similar but not identical luminaries. Field Adjustable Wattage (FAWS) Multiplier Chart FAWS Position Typical Delivered Lumens Multiplier Typical System wattage Note: Typical value accuracy +/- 5% RFL_Spec 07/18 page 3 of 5

20 RFL RoadFocus Large, LED Cobrahead Dimensions Side View 37.63" 956 mm 37.63" 956 mm 4.63" 117 mm 4.63" 117 mm Bottom View 13.63" 346 mm 13.63" 346 mm RFL RFL Weight: 27.3 Lbs EPA: 0.92 sq. ft. Specifications Housing Made of a low copper die cast Aluminum alloy (A3), 0." (2.5mm) minimum thickness. Fits on a 1.66" (42mm) O.D. (1.25" NPS), 1.9" (48mm) O.D. (1.5" NPS) or 2 3/8" (mm) O.D. (2" NPS) by 5 1/2" (140mm) minimum long tenon. Comes with 2 zinc plated clamps fixed by 4 zinc plated hexagonal bolts 3/8 16 UNC for ease of installation. Provides an easy step adjustment of +/- 5 tilt in 2.5º increments. Includes integral bubble level standard (always included). A quick release, tool less entry, single latch, hinged, removable door opens downward to provide access to electronic components and to a terminal block. Door is secured to prevent accidental dropping or disengagement. A clearance of 13" (3mm) at the rear is required in order to remove the door. Complete with a bird guard protecting against birds and similar intruders and an ANSI label as per C to identify wattage and source (both included in box). Housing (including electrical compartment) rated IP54 per ANSI C Light Engine Composed of 4 main components: LED Module / Optical System / Heat Sink / Driver. Electrical components are RoHS compliant, IP66 sealed light engine LEDs tested by ISO accredited lab in accordance with IESNA LM- guidelines in compliance with EPA ENERGY STAR, extrapolations in accordance with IESNA TM-21. Metal core board ensures greater heat transfer and longer lifespan. LED Module: Composed of high performance white LEDs. Color temperature as per ANSI/NEMA bin 2700 Kelvin nominal (2725 ±145K) CRI min, 00 Kelvin nominal (45K +/ 175K) or 4000 Kelvin nominal (3985K +/ 275K), CRI 70 Min. 75 Typical. Other CCT/CRI also available, consult factory. RFL_Spec 07/18 page 4 of 5 Optical System: Composed of high performance UV stabilized optical grade polymer refractor lenses to achieve desired distribution optimized to get maximum spacing, target lumens and a superior lighting uniformity. System is rated IP66. Performance shall be tested per LM-63, LM-79 and TM-15 (IESNA) certifying its photometric performance. 0% uplight and U0 per IESNA TM-15. Heat Sink: Built in the housing, designed to ensure high efficacy and superior cooling by natural vertical convection air flow pattern always close to LEDs and driver optimising their efficiency and life. Product does not use any cooling device with moving parts (only passive cooling). Wide openings enable natural cleaning and removal of dirt and debris. Entire luminaire is rated for operation in ambient temperature of -40 C / -40 F up to +40 C / +104 F. Driver: High power factor of % min. Electronic driver, operating range 50/ Hz. Auto adjusting universal voltage input from 120 to 277 or 347 to 4 VAC rated for both application line to line or line to neutral, Class I, THD of 20% max. 1 driver (64 LED); 2 drivers (all others). DMG: Dimming compatible 0-10 volts. The current supplying the LEDs will be reduced by the driver if the driver experiences internal overheating as a protection to the LEDs and the electrical components. Output is protected from short circuits, voltage overload and current overload. Automatic recovery after correction. Standard built in driver surge protection of 2.5kV (min). Integrated Features DMG: Dimmable driver 0-10V. RCD7*: Receptacle with 7 pins enabling dimming and additional functionality (to be determined), can be used with a twist lock Interact City node or photoelectric cell or a shorting cap. SP1: Surge protection device tested in accordance with ANSI/IEEE C62.45 per ANSI/IEEE C Scenario I Category C High Exposure 10kV/10kA waveforms for Line-Ground, Line-Neutral and Neutral-Ground, and in accordance with DOE MSSLC Model Specification for LED Roadway Luminaires Appendix D Electrical Immunity High test level 10kV/10kA. Please note that these integrated features always come with RoadFocus luminaire. * Use of photoelectric cell or shorting cap is required to ensure proper illumination.

21 RFL RoadFocus Large, LED Cobrahead Specifications (continued) Driver and Luminaire Options DALI*: Pre-set driver compatible with the DALI control system. SRD: Sensor Ready Driver including SR communication (used for dimming and other functionalities), 24V auxiliary supply and a logical signal input (LSI) connected to the top NEMA twist lock receptacle and bottom TLRSR receptacle, if this option included/ chosen. This configuration is compatible with Interact City controllers. SRD1: Sensor Ready Driver including SR communication (used for dimming and other functionalities) but with 24V auxiliary supply and a logical signal input (LSI) not connected to the top NEMA twist lock. If TLRSR receptacle option included, standard SR communication, 24V auxiliary supply and LSI are connected to the TLRSR receptacle. FAWS: Field Adjustable Wattage Selector, pre set to the highest position, can be easily switched in the field to the required position. This reduces total luminaire wattage consumption and reduces the light level see the FAWS multiplier chart for more details. Note: It is not recommended to use FAWS with other dimming or controls; if you do, set the switch to position 10 (maximum output) to enable the other dimming or controls. Switching FAWS to any position other than 10 will disable the other dimming or controls. SP2: 20kV / 20kA surge protection device that provides extra protection beyond the SP1 10kV/10kA level. RCD*: Receptacle with 5 pins enabling dimming, can be used with a twist lock Interact City or photoelectric cell or a shorting cap. Please note: Additional hardware will be required to utilize the additional 2 pins on this receptacle. HS: House side shield, 1 per 16 LED light engine. PH8: Twist-lock Photoelectric Cell, UNV ( VAC). PH8/347: Twist-lock Photoelectric Cell, HVU (347VAC). PH8/4: Twist-lock Photoelectric Cell, HVU (4VAC). PHXL: Twist-lock Photoelectric Cell, extended life, UNV ( VAC). PH9: Shorting cap. API: Factory Installed NEMA label, ANSI C compliant. Consult factory for other labeling needs. * Use of photoelectric cell or shorting cap is required to ensure proper illumination. Luminaire Useful Life Refer to IES files for energy consumption and delivered lumens for each option. Based on ISTMT in situ thermal testing in accordance with UL1598 and UL8750, Philips System Reliability Tool, Philips Advance data and Philips Lumileds LM-/TM-21 data, expected to reach,000 + hours with >L70 lumen 25 C. Luminaire Useful Life accounts for LED lumen maintenance AND all of these additional factors including: LED life, driver life, PCB substrate, solder joints, on/off cycles, burning hours and corrosion. Wiring The connection of the luminaire is done using a terminal block connector 0V, 85A for use with #2 14 AWG. wires from the primary circuit, located inside the housing. Due to the inrush current that occurs with electronic drivers, recommend using a 10Amp time-delay fuse to avoid unwanted fuse blowing (false tripping) that can occur with normal or fast acting fuses. Hardware All exposed screws shall be complete with Ceramic primer seal to reduce seizing of the parts, also offers a high resistance to corrosion. All seals and sealing devices are made and/or lined with EPDM and/or silicone and/or rubber. Finish Color in accordance with the AAMA 23 standard. Application of polyester powder coat paint (4 mils/ microns) with ± 1 mils/24 microns of tolerance. The Thermosetting resins provides a discoloration resistant finish in accordance with the ASTM D2244 standard, as well as luster retention in keeping with the ASTM D523 standard and humidity proof in accordance with the ASTM D2247 standard. The surface treatment achieves a minimum of 00 hours for salt spray resistant finish in accordance with testing performed and per ASTM B117 standard. LED products manufacturing standard The electronic components sensitive to electrostatic discharge (ESD) such as light emitting diodes (LEDs) are assembled in compliance with IEC and ANSI/ ESD S20.20 standards so as to eliminate ESD events that could decrease the useful life of the product. Vibration Resistance The RFL meets the ANSI C136.31, American National Standard for Roadway Luminaire Vibration specifications for Bridge/overpass applications. (Tested for 3G over,000 cycles by independent lab) Certifications and Compliance culus Listed for Canada and USA. Luminaire meets DOE and MSSLC Model Specification for LED Roadway Luminaires. Most versions of RoadFocus LED Cobrahead luminaires are DesignLights Consortium qualified, consult DLC QPL to confirm your specific fixture selection is approved. CCTs 00K and warmer are Dark Sky Approved. Luminaire complies with or exceeds the following ANSI C136 standards:.2,.3,.10,.14,.15,.22,.25,.31,.37,.41. Service Tag Each individual luminaire is uniquely identifiable, thanks to the Philips Service tag application. With a simple scan of a QR code, placed on the inside of the mast door, you gain instant access to the luminaire configuration, making installation and maintenance operations faster and easier, no matter what stage of the luminaire s lifetime. Just download the APP and register your product right away. For more details visit: philips.com/servicetag Limited Warranty 10-year limited warranty. See philips.com/warranties for details and restrictions. Brackets/Arms For brackets / arms available with this luminaire, see Lumec 3D for details Signify Holding. All rights reserved. Signify reserves the right to make changes in specifications and/ or to discontinue any product at any time without notice or obligation and will not be liable for any consequences resulting from the use of this publication. RFL_Spec 07/18 page 5 of 5 Philips Lighting North America Corporation 200 Franklin Square Drive, Somerset, NJ Tel Philips Lighting Canada Ltd. 281 Hillmount Rd, Markham, ON, Canada L6C 2S3 Tel

22 Roadway RoadFocus Project: Location: Cat.No: Type: Lamps: Notes: Qty: RFM (medium) The Philips Lumec RoadFocus LED Cobra Head luminaires feature a sleek design that provides seamless replacement of existing HID luminaires. RoadFocus is available in three sizes, offers multiple lumen packages, and a complete array of optical distributions, making it an outstanding solution for all types of roadway applications. Includes Service Tag, Philips innovative way to provide assistance throughout the life of the product. Ordering guide example: RFM-108W32LED3K-G2-R2M-UNV-DMG-HS-PH8-RCD7-GY3 Series RFM LED module CCT Generation G2 Distribution Voltage Options Controls 4 Options Finish RFM RoadFocus Roadway, medium W24LED 35W32LED 12 45W24LED 50W24LED 55W24LED 55W32LED 12 55W48LED 12 72W32LED W48LED 85W24LED 85W36LED W40LED 108W32LED 108W48LED 1W32LED 7 135W40LED 1W48LED 4K 4000k 3K 00k 2.7K k G2 Generation 2 Type 2 R2S Type II short (ASYM) R2M Type II Medium (ASYM) Type 3 R3S Type III short (ASYM) R3M Type III Medium (ASYM) Type 4 4 Type IV (ASYM) Type Type V (SYMM) UNV V HVU 347-4V DALI 1 Digitally addressable lighting interface DMG V SRD 1 Sensor ready driver, standard configuration SRD1 1 Sensor ready driver, alternate configuration 2C API FAWS 7 HS NRC 8 NYBC 1, 10 PH8 Twist-lock Two clamp with 4 bolts Textured Factory installed NEMA label, BK Black ANSI C compliant BR Bronze Field adjustable wattage selector GY3 Gray WH White House Side Shield, shield, 1 per 16 LED light engine No receptacle 4-position terminal block photoelectric cell, UNV ( VAC) PH8/347 10, 13 Twist-lock photoelectric cell (347VAC) PH8/4 10, 13 Twist-lock photoelectric cell (4VAC) 1, 10 PHXL Twist-lock photoelectric Cell, extended life, UNV ( VAC) PH9 10 Shorting cap RCD 3, 9 Tool less receptacle for twist-lock photocell or shorting cap, 5-pin (optional) RCD7 3, 5 Tool less receptacle for twist-lock photocell or shorting cap, 7-pin (standard) SP2 20kV / 20kA Surge protector TLRSR 6 SR receptacle 1. Not available with HVU. 2. Not available with HS option. 3. Use of photoelectric cell or shorting cap is required to ensure proper illumination. 4. Select either DALI or DMG or SRD or SRD1 mandatory option. 5. Please note this integrated feature come standard with RoadFocus. 6. Only available with SRD or SRD1 Driver Options. 7. Only available with DMG Driver Options 8. Not available with PH8, PH8/347, PH8/4, PHXL, PH9, DALI, SRD or SRD1 Driver Options. 9. Not available with SRD Driver Options. 10. Either RCD or RCD7 must be selected for this option. 11. Extended lead-time may apply. Consult factory. 12. FAWS table accuracy +/- 15% on these models. 13. Not available with UNV. RoadFocus-RFM-Spec 07/18 page 1 of 5

23 RFM RoadFocus Medium, LED Cobrahead Accessories (must be ordered as separate line item - quickly and easily installed in the field) Interact City connector node. * * Contact the factory for additional support when connected lighting or additional services are desired. Predicted Lumen Depreciation Data Predicted performance derived from LED manufacturer s data and engineering design estimates, based on IESNA LM- methodology. Actual experience may vary due to field application conditions.l 70 is the predicted time when LED performance depreciates to 70% of initial lumen output. Calculated per IESNA TM Published L 70 hours limited to 6 times actual LED test hours Ambient Temperature C Driver ma Calculated L 70 Hours L 70 per TM-21 Lumen Maintenance % at,000 hrs 25 C up to 1050 ma >,000 hours >,000 hours >88% 25 C above 1050 ma 74,000 hours >36,000 hours 75% LED Wattage values Ordering Code Total LEDs LED Current (ma) Average System Watts 14 Wattage label 15 RFM-W24LED RFM-45W24LED RFM-55W24LED RFM-85W24LED RFM-35W32LED RFM-55W32LED RFM-72W32LED RFM-108W32LED RFM-1W32LED Ordering Code Total LEDs LED Current (ma) Average System Watts 14 Wattage label 15 RFM-85W36LED RFM-50W40LED RFM-W40LED RFM-135W40LED RFM-55W48LED RFM-W48LED RFM-108W48LED RFM-1W48LED Typical values, rounded. 15. As per ANSI C Consult factory for other labeling needs. LED Lumen values Ordering Code Color Lumen Efficacy Temp. Output (LPW) Type R2S Type R2M Type R3S Type R3M Type 4 Type 5 Lumen Efficacy Output (LPW) Lumen Efficacy Output (LPW) Actual performance may vary due to installation variables including optics, mounting/ceiling height, dirt depreciation, light loss factor, etc.; highly recommended to confirm performance with a layout - contact Applications at outdoorlighting.applications@philips.com. Consult DLC QPL to confirm your specific fixture selection is DLC approved. Note: Some data may be scaled based on tests of similar but not identical luminaries. Lumen Efficacy Output (LPW) Lumen Efficacy Output (LPW) Lumen Efficacy Output (LPW) RFM-W24LED , B1-U0-G1 3, B1-U0-G1 3, B1-U0-G1 3, B1-U0-G1 3,631 1 B1-U0-G1 3, B2-U0-G1 RFM-45W24LED , B1-U0-G1 5, B1-U0-G1 5, B1-U0-G1 5, B1-U0-G1 5, B1-U0-G2 5, B3-U0-G1 RFM-55W24LED , B2-U0-G1 6, B2-U0-G1 6, B1-U0-G2 6, B2-U0-G1 6, B1-U0-G2 6, B3-U0-G1 RFM-85W24LED , B2-U0-G1 8, B2-U0-G2 9, B2-U0-G2 8, B2-U0-G2 9, B2-U0-G2 9, B3-U0-G2 RFM-35W32LED , B1-U0-G1 4,2 1 B1-U0-G1 4, B1-U0-G1 4,821 1 B1-U0-G1 4, B1-U0-G2 4, B3-U0-G1 RFM-55W32LED , B2-U0-G1 6,8 129 B2-U0-G1 7, B1-U0-G2 6,936 1 B2-U0-G1 6, B1-U0-G2 7, B3-U0-G2 RFM-72W32LED , B2-U0-G1 8, B2-U0-G2 8, B1-U0-G2 8,7 120 B2-U0-G2 8, B2-U0-G2 8, B3-U0-G2 RFM-108W32LED , B3-U0-G2 12, B3-U0-G2 12, B2-U0-G2 12, B3-U0-G2 12, B2-U0-G2 12, B4-U0-G2 RFM-1W32LED , B3-U0-G2 14, B3-U0-G3 14, B2-U0-G2 14, B3-U0-G2 13, B2-U0-G3 14, B4-U0-G2 RFM-85W36LED ,433 1 B2-U0-G2 9, B2-U0-G2 10, B2-U0-G2 10, B2-U0-G2 9, B2-U0-G2 10, B4-U0-G2 RFM-50W40LED , B2-U0-G1 6, B2-U0-G1 6, B1-U0-G2 6, B2-U0-G1 6, B1-U0-G2 6, B3-U0-G1 RFM-W40LED , B3-U0-G2 11, B3-U0-G2 11, B2-U0-G2 11, B3-U0-G2 11, B2-U0-G2 11, B4-U0-G2 RFM-135W40LED , B3-U0-G2 15, B3-U0-G3 15, B2-U0-G3 15, B3-U0-G2 15,0 112 B2-U0-G3 15, B4-U0-G2 RFM-55W48LED , B2-U0-G1 7, B2-U0-G2 7, B1-U0-G2 7, B2-U0-G1 7,166 1 B1-U0-G2 7,3 134 B3-U0-G2 RFM-W48LED , B3-U0-G2 10, B2-U0-G2 10, B2-U0-G2 10, B2-U0-G2 10,8 128 B2-U0-G2 10,6 132 B4-U0-G2 RFM-108W48LED , B3-U0-G2 13, B3-U0-G2 13, B2-U0-G2 13, B3-U0-G2 13, B2-U0-G3 13, B4-U0-G2 RFM-1W48LED , B3-U0-G2 18, B3-U0-G3 18, B3-U0-G3 18, B3-U0-G3 18,1 113 B3-U0-G3 18, B4-U0-G2 RoadFocus-RFM-Spec 07/18 page 2 of 5

24 RFM RoadFocus Medium, LED Cobrahead LED Lumen values (continued) Ordering Code Color Lumen Efficacy Temp. Output (LPW) Type R2S Type R2M Type R3S Type R3M Type 4 Type 5 Lumen Efficacy Output (LPW) Lumen Efficacy Output (LPW) Lumen Efficacy Output (LPW) Lumen Efficacy Output (LPW) Lumen Efficacy Output (LPW) RFM-W24LED 00 3, B1-U0-G1 3, B1-U0-G1 3, B1-U0-G1 3, B1-U0-G1 3, B1-U0-G1 3, B2-U0-G1 RFM-45W24LED 00 5, B1-U0-G1 4, B1-U0-G1 5, B1-U0-G1 4, B1-U0-G1 4, B1-U0-G2 4, B3-U0-G1 RFM-55W24LED 00 6, B2-U0-G1 6, B2-U0-G1 6, B1-U0-G2 6,1 113 B2-U0-G1 6, B1-U0-G2 6, B3-U0-G1 RFM-85W24LED 00 8, B2-U0-G1 8, B2-U0-G2 8, B1-U0-G2 8, B2-U0-G2 8, B2-U0-G2 8, B3-U0-G2 RFM-35W32LED 00 4,7 128 B1-U0-G1 4, B1-U0-G1 4,1 124 B1-U0-G1 4, B1-U0-G1 4, B1-U0-G1 4, B3-U0-G1 RFM-55W32LED 00 6,5 127 B2-U0-G1 6, B2-U0-G1 6, B1-U0-G2 6, B2-U0-G1 6, B1-U0-G2 6, B3-U0-G1 RFM-72W32LED 00 8, B2-U0-G1 8, B2-U0-G2 8,3 115 B1-U0-G2 8, B2-U0-G2 8, B2-U0-G2 8, B3-U0-G2 RFM-108W32LED 00 11, B3-U0-G2 11, B3-U0-G2 11, B2-U0-G2 11, B3-U0-G2 11, B2-U0-G2 11,7 109 B4-U0-G2 RFM-1W32LED 00 13, B3-U0-G2 13, B3-U0-G2 13, B2-U0-G2 13, B3-U0-G2 13, B2-U0-G3 13,9 106 B4-U0-G2 RFM-85W36LED 00 9, B2-U0-G2 9,4 118 B2-U0-G2 9, B2-U0-G2 9, B2-U0-G2 9, B2-U0-G2 9, B3-U0-G2 RFM-50W40LED 00 5, B2-U0-G1 5, B2-U0-G1 5,8 131 B1-U0-G2 5,764 1 B2-U0-G1 5, B1-U0-G2 5, B3-U0-G1 RFM-W40LED 00 10, B3-U0-G2 10, B2-U0-G2 10, B2-U0-G2 10, B2-U0-G2 10, B2-U0-G2 10, B4-U0-G2 RFM-135W40LED 00 14, B3-U0-G2 14, B3-U0-G3 14, B2-U0-G2 14, B3-U0-G2 14, B2-U0-G3 14, B4-U0-G2 RFM-55W48LED 00 7, B2-U0-G1 6, B2-U0-G1 6,3 125 B1-U0-G2 6, B2-U0-G1 6, B1-U0-G2 6, B3-U0-G1 RFM-W48LED 00 10, B2-U0-G2 9, B2-U0-G2 9, B2-U0-G2 9, B2-U0-G2 9, B2-U0-G2 10,0 124 B4-U0-G2 RFM-108W48LED 00 12, B3-U0-G2 12, B3-U0-G2 12, B2-U0-G2 12, B3-U0-G2 12, B2-U0-G2 12, B4-U0-G2 RFM-1W48LED 00 17, B3-U0-G2 17, B3-U0-G3 17, B2-U0-G3 17, B3-U0-G3 17, B3-U0-G3 17, B4-U0-G2 Type R2S Type R2M Type R3S Type R3M Type 4 Type 5 Color Lumen Efficacy Lumen Efficacy Lumen Efficacy Lumen Efficacy Lumen Efficacy Lumen Efficacy Ordering Code Temp. Output (LPW) Output (LPW) Output (LPW) Output (LPW) Output (LPW) Output (LPW) RFM-W24LED , B1-U0-G0 2, B1-U0-G1 2,2 B1-U0-G1 2, B1-U0-G1 2, B1-U0-G1 2,781 B2-U0-G1 RFM-45W24LED , B1-U0-G1 3, B1-U0-G1 4, B1-U0-G1 3, B1-U0-G1 3, B1-U0-G1 3, B3-U0-G1 RFM-55W24LED , B1-U0-G1 4, B1-U0-G1 5, B1-U0-G1 4,4 B1-U0-G1 4, B1-U0-G2 5, B3-U0-G1 RFM-85W24LED , B2-U0-G1 6, B2-U0-G1 6,7 84 B1-U0-G2 6, B2-U0-G1 6, B1-U0-G2 6, B3-U0-G1 RFM-35W32LED , B1-U0-G1 3, B1-U0-G1 3,686 B1-U0-G1 3, B1-U0-G1 3, B1-U0-G1 3, B2-U0-G1 RFM-55W32LED , B2-U0-G1 5, B1-U0-G1 5, B1-U0-G1 5, B1-U0-G1 5, B1-U0-G2 5,340 B3-U0-G1 RFM-72W32LED , B2-U0-G1 6,570 B2-U0-G1 6, B1-U0-G2 6,596 B2-U0-G1 6,536 B1-U0-G2 6, B3-U0-G1 RFM-108W32LED , B2-U0-G2 9, B2-U0-G2 9, B2-U0-G2 9, B2-U0-G2 9, B2-U0-G2 9,3 86 B3-U0-G2 RFM-1W32LED , B3-U0-G2 10,4 81 B2-U0-G2 10, B2-U0-G2 10, B2-U0-G2 10, B2-U0-G2 10, B4-U0-G2 RFM-85W36LED , B2-U0-G1 7, B2-U0-G2 7, B1-U0-G2 7, B2-U0-G2 7, B1-U0-G2 7, B3-U0-G2 RFM-50W40LED ,0 108 B1-U0-G1 4, B1-U0-G1 4, B1-U0-G1 4, B1-U0-G1 4, B1-U0-G2 4, B3-U0-G1 RFM-W40LED , B2-U0-G1 8, B2-U0-G2 8, B1-U0-G2 8, B2-U0-G2 8, B2-U0-G2 8, B3-U0-G2 RFM-135W40LED , B3-U0-G2 11, B3-U0-G2 11, B2-U0-G2 11, B3-U0-G2 11, B2-U0-G2 11, B4-U0-G2 RFM-55W48LED , B2-U0-G1 5, B1-U0-G1 5,529 B1-U0-G2 5, B1-U0-G1 5, B1-U0-G2 5, B3-U0-G1 RFM-W48LED , B2-U0-G1 7,7 97 B2-U0-G2 7, B1-U0-G2 7, B2-U0-G2 7, B1-U0-G2 8, B3-U0-G2 RFM-108W48LED , B2-U0-G2 9, B2-U0-G2 10, B2-U0-G2 9, B2-U0-G2 9,4 92 B2-U0-G2 10, B4-U0-G2 RFM-1W48LED , B3-U0-G2 13, B3-U0-G2 13, B2-U0-G2 13, B3-U0-G2 13, B2-U0-G3 13, B4-U0-G2 Actual performance may vary due to installation variables including optics, mounting/ceiling height, dirt depreciation, light loss factor, etc.; highly recommended to confirm performance with a layout - contact Applications at outdoorlighting.applications@philips.com. Consult DLC QPL to confirm your specific fixture selection is DLC approved. Note: Some data may be scaled based on tests of similar but not identical luminaries. RoadFocus-RFM-Spec 07/18 page 3 of 5

25 RFM RoadFocus Medium, LED Cobrahead Field Adjustable Wattage (FAWS) Multiplier Chart FAWS Position Typical Delivered Lumens Multiplier Typical System wattage Note: Typical value accuracy +/- 5% 23.25" 591 mm 4.38" 111 mm Dimensions Side View Bottom View Weight: 12.2 Lbs EPA: 0.53 sq. ft " 591 mm 11" RFM 279 mm 4.38" 111 mm Specifications Housing Made of a low copper die cast Aluminum alloy (A3), 0." (2.5mm) minimum thickness. Fits on a 1.66" (42mm) O.D. (1.25" NPS), 1.9" (48mm) O.D. (1.5" NPS) or 2 3/8" (mm) O.D. (2" NPS) by 5 1/2" (140mm) minimum long tenon. Comes with a zinc plated clamp fixed by 2 zinc plated hexagonal bolts 3/8 16 UNC for ease of installation. Provides an easy step adjustment of +/- 5 tilt in 2.5º increments. Includes integral bubble level standard (always included). A quick release, tool less entry, single latch, hinged, removable door opens downward to provide access to electronic components and to a terminal block. Door is secured to prevent accidental dropping or disengagement. A clearance of 13" (3mm) at the rear is required in order to remove the door. Complete with a bird guard protecting against birds and similar intruders and an ANSI label as per C to identify wattage and source (both included in box). Housing (including electrical compartment) rated IP54 per ANSI C Light Engine Composed of 4 main components: LED Module / Optical System / Heat Sink / Driver. Electrical components are RoHS compliant, IP66 sealed light engine LEDs tested by ISO accredited lab in accordance with IESNA LM- guidelines in compliance with EPA ENERGY STAR, extrapolations in accordance with IESNA TM-21. Metal core board ensures greater heat transfer and longer lifespan. RoadFocus-RFM-Spec 07/18 page 4 of 5 RFM LED Module: Composed of high performance white LEDs. Color temperature as per ANSI/NEMA bin " Kelvin nominal (2725 ±145K) CRI min, 00 Kelvin 279 mm nominal (45K +/ 175K) or 4000 Kelvin nominal (3985K +/ 275K), CRI 70 Min. 75 Typical. Other CCT/CRI also available, consult factory. Optical System: Composed of high performance UV stabilized optical grade polymer refractor lenses to achieve desired distribution optimized to get maximum spacing, target lumens and a superior lighting uniformity. System is rated IP66. Performance shall be tested per LM-63, LM-79 and TM-15 (IESNA) certifying its photometric performance. 0% uplight and U0 per IESNA TM-15. Heat Sink: Built in the housing, designed to ensure high efficacy and superior cooling by natural vertical convection air flow pattern always close to LEDs and driver optimizing their efficiency and life. Product does not use any cooling device with moving parts (only passive cooling). Wide openings enable natural cleaning and removal of dirt and debris. Entire luminaire is rated for operation in ambient temperature of -40 C / -40 F up to +40 C / +104 F. +50 C / +122 F also available, consult factory. Driver: High power factor of % min. Electronic driver, operating range 50/ Hz. Auto adjusting universal voltage input from 120 to 277 or 347 to 4 VAC rated for both application line to line or line to neutral, Class I, THD of 20% max. DMG: Dimming compatible 0-10 volts. The current supplying the LEDs will be reduced by the driver if the driver experiences internal overheating as a protection to the LEDs and the electrical components. Output is protected from short circuits, voltage overload and current overload. Automatic recovery after correction. Standard built in driver surge protection of 2.5kV (min). Integrated Features DMG: Dimmable driver 0-10V. RCD7*: Tool less orientable receptacle with 7 pins enabling dimming and additional functionality (to be determined), can be used with a twist lock Interact City node or photoelectric cell or a shorting cap. SP1: Surge protection device tested in accordance with ANSI/IEEE C62.45 per ANSI/IEEE C Scenario I Category C High Exposure 10kV/10kA waveforms for Line-Ground, Line-Neutral and Neutral-Ground, and in accordance with DOE MSSLC Model Specification for LED Roadway Luminaires Appendix D Electrical Immunity High test level 10kV/10kA. Please note that these integrated features always come with RoadFocus luminaire. * Use of photoelectric cell or shorting cap is required to ensure proper illumination.

26 RFM RoadFocus Medium, LED Cobrahead Specifications (continued) Driver and Luminaire Options DALI: Pre-set driver compatible with the DALI control system. SRD: Sensor Ready Driver including SR communication (used for dimming and other functionalities), 24V auxiliary supply and a logical signal input (LSI) connected to the top NEMA twist lock receptacle and bottom TLRSR receptacle, if this option included/ chosen. This configuration is compatible with Interact City controllers. SRD1: Sensor Ready Driver including SR communication (used for dimming and other functionalities) but with 24V auxiliary supply and a logical signal input (LSI) not connected to the top NEMA twist lock. If TLRSR receptacle option included, standard SR communication, 24V auxiliary supply and LSI are connected to the TLRSR receptacle. FAWS: Field Adjustable Wattage Selector, pre set to the highest position, can be easily switched in the field to the required position. This reduces total luminaire wattage consumption and reduces the light level see the FAWS multiplier chart for more details. Note: It is not recommended to use FAWS with other dimming or controls; if you do, set the switch to position 10 (maximum output) to enable the other dimming or controls. Switching FAWS to any position other than 10 will disable the other dimming or controls. SP2: 20kV / 20kA surge protection device that provides extra protection beyond the SP1 10kV/10kA level. NRC: No Receptacle. Fixture is shipped with a cap instead of a receptacle. NYBC: 4-position terminal block RCD*: Tool Less orientable receptacle with 5 pins enabling dimming, can be used with a twist lock Interact City or photoelectric cell or a shorting cap. TLRSR: SR Sensor connector, installed in fixture door. Shipped with protective cover. HS: House side shield, 1 per 16 LED light engine. PH8: Twist-lock Photoelectric Cell, UNV ( VAC). PH8/347: Twist-lock Photoelectric Cell, HVU (347VAC). PH8/4: Twist-lock Photoelectric Cell, HVU (4VAC). PHXL: Twist-lock Photoelectric Cell, extended life, UNV ( VAC). PH9: Shorting cap. API: Factory Installed NEMA label, ANSI C compliant. Consult factory for other labeling needs. * Use of photoelectric cell or shorting cap is required to ensure proper illumination. Luminaire Useful Life Refer to IES files for energy consumption and delivered lumens for each option. Based on ISTMT in situ thermal testing in accordance with UL1598 and UL8750, Philips System Reliability Tool, Philips Advance data and Philips Lumileds LM-/TM-21 data, expected to reach,000 + hours (72W32LED and 108W48LED at 700mA) or 94,500 hours (108W32LED and 1W48LED at 1050mA) with >L70 lumen 25 C. Luminaire Useful Life accounts for LED lumen maintenance AND all of these additional factors including: LED life, driver life, PCB substrate, solder joints, on/off cycles, burning hours and corrosion. Wiring The connection of the luminaire is done using a terminal block connector 0V, 85A for use with #2 14 AWG. wires from the primary circuit, located inside the housing. Due to the inrush current that occurs with electronic drivers, recommend using a 10Amp time-delay fuse to avoid unwanted fuse blowing (false tripping) that can occur with normal or fast acting fuses. Hardware All exposed screws shall be complete with Ceramic primer seal to reduce seizing of the parts, also offers a high resistance to corrosion. All seals and sealing devices are made and/or lined with EPDM and/or silicone and/or rubber. Finish Color in accordance with the AAMA 23 standard. Application of polyester powder coat paint (4 mils/ microns) with ± 1 mils/24 microns of tolerance. The Thermosetting resins provides a discoloration resistant finish in accordance with the ASTM D2244 standard, as well as luster retention in keeping with the ASTM D523 standard and humidity proof in accordance with the ASTM D2247 standard. The surface treatment achieves a minimum of 00 hours for salt spray resistant finish in accordance with testing performed and per ASTM B117 standard. LED products manufacturing standard The electronic components sensitive to electrostatic discharge (ESD) such as light emitting diodes (LEDs) are assembled in compliance with IEC and ANSI/ESD S20.20 standards so as to eliminate ESD events that could decrease the useful life of the product. Vibration Resistance The RFM meets the ANSI C136.31, American National Standard for Roadway Luminaire Vibration specifications for Bridge/overpass applications. (Tested for 3G over,000 cycles by independent lab) Certifications and Compliance culus Listed for Canada and USA. Luminaire meets DOE and MSSLC Model Specification for LED Roadway Luminaires. Most versions of RoadFocus LED Cobrahead luminaires are DesignLights Consortium qualified, consult DLC QPL to confirm your specific fixture selection is approved. CCTs 00K and warmer are Dark Sky Approved. Luminaire complies with or exceeds the following ANSI C136 standards:.2,.3,.10,.14,.15,.22,.25,.31,.37,.41. Service Tag Each individual luminaire is uniquely identifiable, thanks to the Philips Service tag application. With a simple scan of a QR code, placed on the inside of the mast door, you gain instant access to the luminaire configuration, making installation and maintenance operations faster and easier, no matter what stage of the luminaire s lifetime. Just download the APP and register your product right away. For more details visit: philips.com/servicetag Limited Warranty 10-year limited warranty. See philips.com/warranties for details and restrictions. Brackets/Arms For brackets / arms available with this luminaire, see Lumec 3D for details Signify Holding. All rights reserved. Signify reserves the right to make changes in specifications and/ or to discontinue any product at any time without notice or obligation and will not be liable for any consequences resulting from the use of this publication. RoadFocus-RFM-Spec 07/18 page 5 of 5 Philips Lighting North America Corporation 200 Franklin Square Drive, Somerset, NJ Tel Philips Lighting Canada Ltd. 281 Hillmount Rd, Markham, ON, Canada L6C 2S3 Tel

27 Roadway RoadFocus Project: Location: Cat.No: Type: Lamps: Notes: Qty: RFS (small) Ordering guide Series RFS LED module CCT Generation G2 The Philips Lumec RoadFocus LED Cobra Head luminaires feature a sleek design that provides seamless replacement of existing HID luminaires. RoadFocus is available in three sizes, offers multiple lumen packages, and a complete array of optical distributions, making it an outstanding solution for multiple roadway applications. Includes Service Tag, Philips innovative way to provide assistance throughout the life of the product. Distribution Voltage Options Controls 4 example: RFS-35W16LED4K-G2-R2M-UNV-DMG-HS-PH8-RCD7-GY3 Options Finish RFS RoadFocus Roadway, small 15W12LED 20W12LED 25W12LED W12LED 35W12LED 40W12LED 45W12LED 7 55W12LED 7 25W16LED W16LED 35W16LED 45W16LED 50W16LED 54W16LED W16LED 7 4K 4000k 3K 00k 2.7K k G2 Generation 2 Type 2 R2S Type II short (ASYM) R2M Type II Medium (ASYM) Type 3 R3S Type III short (ASYM) R3M Type III Medium (ASYM) Type 4 4 Type IV (ASYM) Type Type V (SYMM) UNV V HVU 347-4V DALI 1 Digitally addressable lighting interface DMG V SRD 1 Sensor ready driver, standard configuration SRD1 1 Sensor ready driver, alternate configuration API Factory installed NEMA label, ANSI C compliant FAWS 7 Field adjustable wattage selector HS House Side Shield, shield, 1 per 16 LED light engine NRC 8 No receptacle NYBC 4-position terminal block 1, 10 PH8 Twist-lock photoelectric cell, UNV ( VAC) PH8/347 10, 12 Twist-lock photoelectric cell (347VAC) PH8/4 10, 12 Twist-lock photoelectric cell (4VAC) 1, 10 PHXL Twist-lock photoelectric Cell, extended life, UNV ( VAC) PH9 10 Shorting cap RCD 3, 9 Tool less receptacle for twist-lock photocell or shorting cap, 5-pin (optional) Textured BK Black BR Bronze GY3 Gray WH White RCD7 3,5 Tool less receptacle for twist-lock photocell or shorting cap, 7-pin (standard) SP2 20kV / 20kA Surge protector TLRSR 6 SR receptacle 1. Not available with HVU. 2. Not available with HS option. 3. Use of photoelectric cell or shorting cap is required to ensure proper illumination. 4. Select either DALI or DMG or SRD or SRD1 mandatory option. 5. Please note this integrated feature come standard with RoadFocus. 6. Only available with SRD or SRD1 Driver Options. 7. Only available with DMG Driver Options. 8. Not available with PH8, PH8/347, PH8/4, PHXL, PH9, DALI, SRD or SRD1 Driver Options. 9. Not available with SRD Driver Options. 10. Either RCD or RCD7 must be selected for this option. 11. Extended lead-time may apply. Consult factory. 12. Not available with UNV. Accessories (must be ordered as separate line item - quickly and easily installed in the field) Interact City connector node * *Contact the factory for additional support when connected lighting or additional services are desired. RFS Spec 07/18 page 1 of 5

28 RFS RoadFocus Small, LED Cobrahead LED Wattage values Ordering Code Total LEDs LED Current (ma) Average System Watts 13 Wattage label 14 RFS-15W12LED RFS-20W12LED RFS-25W12LED RFS-W12LED RFS-35W12LED RFS-40W12LED RFS-45W12LED RFS-55W12LED Ordering Code Total LEDs LED Current (ma) Average System Watts 13 Wattage label 14 RFS-25W16LED RFS-W16LED RFS-35W16LED RFS-45W16LED RFS-50W16LED RFS-54W16LED RFS-W16LED Typical values, rounded. 14. As per ANSI C Consult factory for other labeling needs. LED Lumen values Ordering Code Color Lumen Efficacy Temp. Output (LPW) Type R2S Type R2M Type R3S Type R3M Type 4 Type 5 Lumen Efficacy Output (LPW) Lumen Efficacy Output (LPW) Lumen Efficacy Output (LPW) Lumen Efficacy Output (LPW) Lumen Efficacy Output (LPW) RFS-15W12LED , B1-U0-G0 1, B1-U0-G1 1, B0-U0-G0 1, B1-U0-G1 1, B0-U0-G1 1,7 127 B1-U0-G0 RFS-20W12LED , B1-U0-G0 2, B1-U0-G1 2,3 122 B1-U0-G1 2, B1-U0-G1 2, B1-U0-G1 2,4 125 B2-U0-G1 RFS-25W12LED , B1-U0-G1 2, B1-U0-G1 3, B1-U0-G1 2, B1-U0-G1 2, B1-U0-G1 3, B2-U0-G1 RFS-W12LED , B1-U0-G1 3,4 117 B1-U0-G1 3, B1-U0-G1 3, B1-U0-G1 3, B1-U0-G1 3,2 122 B2-U0-G1 RFS-35W12LED , B1-U0-G1 4, B1-U0-G1 4, B1-U0-G1 3, B1-U0-G1 4, B1-U0-G1 4, B3-U0-G1 RFS-40W12LED , B1-U0-G1 4, B1-U0-G1 4, B1-U0-G1 4, B1-U0-G1 4, B1-U0-G1 4, B3-U0-G1 RFS-45W12LED ,0 119 B1-U0-G1 5, B1-U0-G1 5, B1-U0-G1 4, B1-U0-G1 5, B1-U0-G1 5, B3-U0-G1 RFS-55W12LED , B2-U0-G1 6, B2-U0-G1 6, B1-U0-G2 5, B2-U0-G1 6, B1-U0-G2 6, B3-U0-G1 RFS-25W16LED ,145 1 B1-U0-G0 3, B1-U0-G1 3, B1-U0-G1 3, B1-U0-G1 2, B1-U0-G1 3, B2-U0-G1 RFS-W16LED , B1-U0-G1 3,9 125 B1-U0-G1 3, B1-U0-G1 3, B1-U0-G1 3, B1-U0-G1 3, B2-U0-G1 RFS-35W16LED , B1-U0-G1 4, B1-U0-G1 4, B1-U0-G1 4, B1-U0-G1 4, B1-U0-G1 4, B3-U0-G1 RFS-45W16LED , B1-U0-G1 5, B1-U0-G1 5, B1-U0-G1 5, B1-U0-G1 5, B1-U0-G2 5, B3-U0-G1 RFS-50W16LED , B2-U0-G1 5, B2-U0-G1 5, B1-U0-G2 5, B2-U0-G1 5, B1-U0-G2 5, B3-U0-G1 RFS-54W16LED , B2-U0-G1 6, B2-U0-G1 6, B1-U0-G2 5, B2-U0-G1 5, B1-U0-G2 6, B3-U0-G1 RFS-W16LED , B2-U0-G1 6, B2-U0-G1 6, B1-U0-G2 6, B2-U0-G1 6,4 108 B1-U0-G2 6, B3-U0-G1 Ordering Code Color Lumen Efficacy Temp. Output (LPW) Type R2S Type R2M Type R3S Type R3M Type 4 Type 5 Lumen Efficacy Output (LPW) Lumen Efficacy Output (LPW) Lumen Efficacy Output (LPW) Lumen Efficacy Output (LPW) Lumen Efficacy Output (LPW) RFS-15W12LED 00 1, B1-U0-G0 1, B1-U0-G0 1, B0-U0-G0 1, B1-U0-G1 1, B0-U0-G1 1, B1-U0-G0 RFS-20W12LED 00 2, B1-U0-G0 2, B1-U0-G1 2, B1-U0-G1 2, B1-U0-G1 2, B1-U0-G1 2, B2-U0-G1 RFS-25W12LED 00 2, B1-U0-G0 2, B1-U0-G1 2, B1-U0-G1 2, B1-U0-G1 2, B1-U0-G1 2, B2-U0-G1 RFS-W12LED 00 3, B1-U0-G1 3, B1-U0-G1 3, B1-U0-G1 3, B1-U0-G1 3, B1-U0-G1 3, B2-U0-G1 RFS-35W12LED 00 4, B1-U0-G1 3, B1-U0-G1 3, B1-U0-G1 3, B1-U0-G1 3, B1-U0-G1 3, B2-U0-G1 RFS-40W12LED 00 4, B1-U0-G1 4, B1-U0-G1 4, B1-U0-G1 4, B1-U0-G1 4,2 107 B1-U0-G1 4, B3-U0-G1 RFS-45W12LED 00 5, B1-U0-G1 4, B1-U0-G1 4, B1-U0-G1 4, B1-U0-G1 4, B1-U0-G2 4, B3-U0-G1 RFS-55W12LED 00 6, B2-U0-G1 5, B2-U0-G1 5, B1-U0-G2 5, B1-U0-G1 5, B1-U0-G2 5, B3-U0-G1 RFS-25W16LED 00 2, B1-U0-G0 2,0 120 B1-U0-G1 2, B1-U0-G1 2, B1-U0-G1 2, B1-U0-G1 2, B2-U0-G1 RFS-W16LED 00 3, B1-U0-G1 3, B1-U0-G1 3,4 120 B1-U0-G1 3, B1-U0-G1 3, B1-U0-G1 3, B2-U0-G1 RFS-35W16LED 00 4, B1-U0-G1 4, B1-U0-G1 4, B1-U0-G1 4, B1-U0-G1 4, B1-U0-G1 4, B3-U0-G1 RFS-45W16LED 00 5, B1-U0-G1 4,9 110 B1-U0-G1 5, B1-U0-G1 4, B1-U0-G1 4, B1-U0-G2 5, B3-U0-G1 RFS-50W16LED 00 5, B2-U0-G1 5, B2-U0-G1 5, B1-U0-G1 5, B1-U0-G1 5,3 106 B1-U0-G2 5, B3-U0-G1 RFS-54W16LED 00 5,6 110 B2-U0-G1 5, B2-U0-G1 5, B1-U0-G2 5,5 105 B1-U0-G1 5, B1-U0-G2 5, B3-U0-G1 RFS-W16LED 00 6, B2-U0-G1 6, B2-U0-G1 6, B1-U0-G2 6, B2-U0-G1 6, B1-U0-G2 6,4 108 B3-U0-G1 Actual performance may vary due to installation variables including optics, mounting/ceiling height, dirt depreciation, light loss factor, etc.; highly recommended to confirm performance with a layout - contact Applications at outdoorlighting.applications@philips.com. Consult DLC QPL to confirm your specific fixture selection is DLC approved. Note: Some data may be scaled based on tests of similar but not identical luminaries. RFS Spec 07/18 page 2 of 5

29 RFS RoadFocus Small, LED Cobrahead LED Lumen values (continued) Type R2S Type R2M Type R3S Type R3M Type 4 Type 5 Color Lumen Efficacy Lumen Efficacy Lumen Efficacy Lumen Efficacy Lumen Efficacy Lumen Efficacy Ordering Code Temp. Output (LPW) Output (LPW) Output (LPW) Output (LPW) Output (LPW) Output (LPW) RFS-15W12LED , B1-U0-G0 1,1 92 B1-U0-G0 1, B0-U0-G0 1, B1-U0-G0 1, B0-U0-G1 1, B1-U0-G0 RFS-20W12LED , B1-U0-G0 1, B1-U0-G1 1, B0-U0-G0 1, B1-U0-G1 1, B0-U0-G1 1, B1-U0-G0 RFS-25W12LED , B1-U0-G0 2, B1-U0-G1 2, B1-U0-G1 2, B1-U0-G1 2, B1-U0-G1 2, B2-U0-G1 RFS-W12LED , B1-U0-G0 2, B1-U0-G1 2,659 B1-U0-G1 2, B1-U0-G1 2, B1-U0-G1 2, B2-U0-G1 RFS-35W12LED , B1-U0-G0 3, B1-U0-G1 3, B1-U0-G1 2, B1-U0-G1 3, B1-U0-G1 3, B2-U0-G1 RFS-40W12LED , B1-U0-G1 3, B1-U0-G1 3, B1-U0-G1 3, B1-U0-G1 3, B1-U0-G1 3, B2-U0-G1 RFS-45W12LED ,001 B1-U0-G1 3, B1-U0-G1 3, B1-U0-G1 3, B1-U0-G1 3, B1-U0-G1 3, B2-U0-G1 RFS-55W12LED , B1-U0-G1 4,7 84 B1-U0-G1 4, B1-U0-G1 4, B1-U0-G1 4, B1-U0-G1 4, B3-U0-G1 RFS-25W16LED , B1-U0-G0 2, B1-U0-G1 2, B1-U0-G1 2, B1-U0-G1 2, B1-U0-G1 2, B2-U0-G1 RFS-W16LED , B1-U0-G0 2, B1-U0-G1 2, B1-U0-G1 2, B1-U0-G1 2, B1-U0-G1 2,9 97 B2-U0-G1 RFS-35W16LED , B1-U0-G1 3, B1-U0-G1 3, B1-U0-G1 3, B1-U0-G1 3, B1-U0-G1 3, B2-U0-G1 RFS-45W16LED ,0 B1-U0-G1 3, B1-U0-G1 4, B1-U0-G1 3, B1-U0-G1 3, B1-U0-G1 4,092 B3-U0-G1 RFS-50W16LED , B1-U0-G1 4,3 87 B1-U0-G1 4, B1-U0-G1 4, B1-U0-G1 4, B1-U0-G1 4,496 B3-U0-G1 RFS-54W16LED , B1-U0-G1 4, B1-U0-G1 4, B1-U0-G1 4, B1-U0-G1 4, B1-U0-G1 4, B3-U0-G1 RFS-W16LED , B1-U0-G1 5, B1-U0-G1 5, B1-U0-G1 5, B1-U0-G1 4, B1-U0-G2 5, B3-U0-G1 Actual performance may vary due to installation variables including optics, mounting/ceiling height, dirt depreciation, light loss factor, etc.; highly recommended to confirm performance with a layout - contact Applications at outdoorlighting.applications@philips.com. Consult DLC QPL to confirm your specific fixture selection is DLC approved. Note: Some data may be scaled based on tests of similar but not identical luminaries. Predicted Lumen Depreciation Data Predicted performance derived from LED manufacturer s data and engineering design estimates, based on IESNA LM- methodology. Actual experience may vary due to field application conditions.l 70 is the predicted time when LED performance depreciates to 70% of initial lumen output. Calculated per IESNA TM Published L 70 hours limited to 6 times actual LED test hours Ambient Temperature C Driver ma Calculated L 70 Hours L 70 per TM-21 Lumen Maintenance % at,000 hrs 25 C up to 1050 ma >,000 hours >,000 hours >84% 25 C above 1050 ma 75,000 hours >36,000 hours >75% Field Adjustable Wattage (FAWS) Multiplier Chart FAWS Position Typical Delivered Lumens Multiplier Typical System wattage Note: Typical value accuracy +/- 5% RFS Spec 07/18 page 3 of 5

30 RFS RoadFocus Small, LED Cobrahead Dimensions Side View mm mm mm mm Bottom View mm mm RFS RFS Specifications Housing Made of a low copper die cast Aluminum alloy (A3), 0." (2.5mm) minimum thickness. Fits on a 1.66" (42mm) O.D. (1.25" NPS), 1.9" (48mm) O.D. (1.5" NPS) or 2 3/8" (mm) O.D. (2" NPS) by 5 1/2" (140mm) minimum long tenon. Comes with a zinc plated clamp fixed by 2 zinc plated hexagonal bolts 3/8 16 UNC for ease of installation. Provides an easy step adjustment of +/- 5 tilt in 2.5º increments. Includes integral bubble level standard (always included). A quick release, tool less entry, single latch, hinged, removable door opens downward to provide access to electronic components and to a terminal block. Door is secured to prevent accidental dropping or disengagement. A clearance of 13" (3mm) at the rear is required in order to remove the door. Complete with a bird guard protecting against birds and similar intruders and an ANSI label as per C to identify wattage and source (both included in box). Housing (including electrical compartment) rated IP54 per ANSI C Light Engine Composed of 4 main components: LED Module / Optical System / Heat Sink / Driver. Electrical components are RoHS compliant, IP66 sealed light engine equipped LEDs tested by ISO accredited lab in accordance with IESNA LM- guidelines in compliance with EPA ENERGY STAR, extrapolations in accordance with IESNA TM-21. Metal core board ensures greater heat transfer and longer lifespan. LED Module: Composed of high performance white LEDs. Color temperature as per ANSI/NEMA bin 2700 Kelvin nominal (2725 ±145K), 2700 Kelvin nominal (2725 ±145K) CRI min, 00 Kelvin nominal (45K +/ 175K) or 4000 Kelvin nominal (3985K +/ 275K), CRI 70 Min. 75 Typical. Other CCT/CRI also available, consult factory. Optical System: Composed of high performance UV stabilized optical grade polymer refractor lenses to achieve desired distribution optimized to get maximum spacing, target lumens and a superior lighting uniformity. System is rated IP66. Performance shall be tested per LM-63, LM-79 and TM-15 (IESNA) certifying its photometric performance. 0% uplight and U0 per IESNA TM-15. Heat Sink: Built in the housing, designed to ensure high efficacy and superior cooling by natural vertical convection air flow pattern always close to LEDs and driver optimising their efficiency and life. Product does not use any cooling device with moving parts (only passive cooling). Wide openings enable natural cleaning and removal of dirt and debris. Entire luminaire is rated for operation in ambient temperature of -40 C / -40 F up to +40 C / +104 F. +50 C / +122 F also available, consult factory. Driver: High power factor of % min. Electronic driver, operating range 50/ Hz. Auto adjusting universal voltage input from 120 to 277 VAC rated for both application line to line or line to neutral, Class I or 2, THD of 20% max. DMG: Dimming compatible 0-10 volts. The current supplying the LEDs will be reduced by the driver if the driver experiences internal overheating as a protection to the LEDs and the electrical components. Output is protected from short circuits, voltage overload and current overload. Automatic recovery after correction. Standard built in driver surge protection of 2.5kV (min). Integrated Features DMG: Dimmable driver 0-10V. RCD7*: Tool less orientable receptacle with 7 pins enabling dimming and additional functionality (to be determined), can be used with a twist lock Interact City node or photoelectric cell or a shorting cap. Please note: Additional hardware will be required to utilize the additional 2 pins on this receptacle. SP1: Surge protection device tested in accordance with ANSI/IEEE C62.45 per ANSI/IEEE C Scenario I Category C High Exposure 10kV/10kA waveforms for Line-Ground, Line-Neutral and Neutral-Ground, and in accordance with DOE MSSLC Model Specification for LED Roadway Luminaires Appendix D Electrical Immunity High test level 10kV/10kA. Please note that these integrated features always come with RoadFocus luminaire. * Use of photoelectric cell or shorting cap is required to ensure proper illumination. RFS Spec 07/18 page 4 of 5

31 RFS RoadFocus Small, LED Cobrahead Specifications (continued) Driver and Luminaire Options DALI: Pre-set driver compatible with the DALI control system. SRD: Sensor Ready Driver including SR communication (used for dimming and other functionalities), 24V auxiliary supply and a logical signal input (LSI) connected to the top NEMA twist lock receptacle and bottom TLRSR receptacle, if this option included/ chosen. This configuration is compatible with Interact City controllers. SRD1: Sensor Ready Driver including SR communication (used for dimming and other functionalities) but with 24V auxiliary supply and a logical signal input (LSI) not connected to the top NEMA twist lock. If TLRSR receptacle option included, standard SR communication, 24V auxiliary supply and LSI are connected to the TLRSR receptacle. FAWS: Field Adjustable Wattage Selector, pre set to the highest position, can be easily switched in the field to the required position. This reduces total luminaire wattage consumption and reduces the light level see the FAWS multiplier chart for more details. Note: It is not recommended to use FAWS with other dimming or controls; if you do, set the switch to position 10 (maximum output) to enable the other dimming or controls. Switching FAWS to any position other than 10 will disable the other dimming or controls. NRC: No Receptacle. Fixture is shipped with a cap instead of a receptacle. NYBC: 4-position terminal block SP2: 20kV / 20kA surge protection device that provides extra protection beyond the SP1 10kV/10kA level. RCD*: Tool Less orientable receptacle with 5 pins enabling dimming, can be used with a twist lock Interact City or photoelectric cell or a shorting cap. TLRSR: SR Sensor connector, installed in fixture door. Shipped with protective cover. HS: House side shield, 1 per 16 LED light engine. PH8: Twist-lock photoelectric cell, UNV ( VAC). PH8/347: Twist-lock photoelectric cell, UNV ( VAC). PH8/4: Twist-lock photoelectric cell, UNV ( VAC). PHXL: Twist-lock Photoelectric Cell, extended life, UNV ( VAC). PH9*: Shorting cap. API: Factory Installed NEMA label, ANSI C compliant. Consult factory for other labeling needs. * Use of photoelectric cell or shorting cap is required to ensure proper illumination. Luminaire Useful Life Refer to IES files for energy consumption and delivered lumens for each option. Based on ISTMT in situ thermal testing in accordance with UL1598 and UL8750, Philips System Reliability Tool, Philips Advance data and LM-/TM-21 data, expected to reach,000 + hours with >L70 lumen 25 C. Luminaire Useful Life accounts for LED lumen maintenance AND all of these additional factors including: LED life, driver life, PCB substrate, solder joints, on/off cycles, burning hours and corrosion. Wiring The connection of the luminaire is done using a terminal block connector 0V, 85A for use with #2 14 AWG. wires from the primary circuit, located inside the housing. Due to the inrush current that occurs with electronic drivers, recommend using a 10Amp time-delay fuse to avoid unwanted fuse blowing (false tripping) that can occur with normal or fast acting fuses. Hardware All exposed screws shall be complete with Ceramic primer seal to reduce seizing of the parts, also offers a high resistance to corrosion. All seals and sealing devices are made and/or lined with EPDM and/or silicone and/or rubber. Finish Color in accordance with the AAMA 23 standard. Application of polyester powder coat paint (4 mils/ microns) with ± 1 mils/24 microns of tolerance. The Thermosetting resins provides a discoloration resistant finish in accordance with the ASTM D2244 standard, as well as luster retention in keeping with the ASTM D523 standard and humidity proof in accordance with the ASTM D2247 standard. The surface treatment achieves a minimum of 00 hours for salt spray resistant finish in accordance with testing performed and per ASTM B117 standard. LED products manufacturing standard The electronic components sensitive to electrostatic discharge (ESD) such as light emitting diodes (LEDs) are assembled in compliance with IEC and ANSI/ESD S20.20 standards so as to eliminate ESD events that could decrease the useful life of the product. Vibration Resistance The RFS meets the ANSI C136.31, American National Standard for Roadway Luminaire Vibration specifications for Bridge/overpass applications. (Tested for 3G over,000 cycles by independent lab) Certifications and Compliance culus Listed for Canada and USA. Luminaire meets DOE and MSSLC Model Specification for LED Roadway Luminaires. Most versions of RoadFocus LED Cobrahead luminaires are DesignLights Consortium qualified, consult DLC QPL to confirm your specific fixture selection is approved. CCTs 00K and warmer are Dark Sky Approved. Luminaire complies with or exceeds the following ANSI C136 standards:.2,.3,.10,.14,.15,.22,.25,.31,.37,.41. Service Tag Each individual luminaire is uniquely identifiable, thanks to the Philips Service tag application. With a simple scan of a QR code, placed on the inside of the mast door, you gain instant access to the luminaire configuration, making installation and maintenance operations faster and easier, no matter what stage of the luminaire s lifetime. Just download the APP and register your product right away. For more details visit: philips.com/servicetag Limited Warranty 10-year limited warranty. See philips.com/warranties for details and restrictions. Brackets/Arms For brackets / arms available with this luminaire, see Lumec 3D for details Signify Holding. All rights reserved. Signify reserves the right to make changes in specifications and/ or to discontinue any product at any time without notice or obligation and will not be liable for any consequences resulting from the use of this publication. RFS Spec 07/18 page 5 of 5 Philips Lighting North America Corporation 200 Franklin Square Drive, Somerset, NJ Tel Philips Lighting Canada Ltd. 281 Hillmount Rd, Markham, ON, Canada L6C 2S3 Tel

32 Roadway RoadView LED Solution Versatile performance Incorporated with Philips LEDGINE LED platform

33 Innovative solutions, sustainable performance. Innovative solutions Sustainable performance The RoadView was created to help those responsible for lighting our streets and highways succeed in their lighting design goals. Powered by the Philips LEDGINE LED platform, and featuring innovative thermal management design, the RoadView offers exceptional performance and value. This versatile luminaire can be tailored to the unique specifications of each project by offering multiple LED boards and wattage options. Utilizing Philips Xitanium LED drivers, and Philips Luxeon LEDs, the RoadView provides exceptional energy efficiency. This luminaire is manufactured with fully recyclable aluminum castings and extrusions that help to protect our environment for years to come. Energy efficiency is enhanced with optional dimming, programmable drivers, and outdoor control systems. Philips Lumec

34 RoadView Roadway At a glance Product features Highly efficient optics improve illuminance uniformity Competitive high value performance luminaire Versatile and expandable LED boards Expanded flexibility in choosing the right wattage for the application Tool free access to electrical compartment Tool-less 3 rotating twistlock photocell receptacle Innovative thermal management provides longer LED lifetime Designed to accommodate the latest in street lighting control technology Easy to install and maintain 3G tested per ANSI C Up to,000 hour rated life Highly efficient IP66 optics Modular design Protective lens Dimensions Fixture Standard wattage Weight Length EPA lb. kg. in. mm. sq. ft. sq. m. RVS 55W32LED W48LED W64LED WLED RVM 1W96LED W112LED W128LED W144LED W1LED " (391mm) 4.66" (118mm) 2.38" (61mm) 4.66" (118mm) 21.38" (543mm) min " (641mm) max " (794mm) min " (895mm) max. 2.38" (61mm) RVS Weight: 23 to 26 lbs (10.4 to 11.8 kg) RVM Weight: 34 to 37 lbs (15.4 to 16.8 kg) 1

35 LEDGINE LED solutions LEDGINE is Philips standard solution for LED luminaires in street lighting Maximized energy savings Compatible with full range of lighting control systems Easy to maintain on-site Easy to upgrade to benefit from latest LED technology Best lighting quality and uniformity Designed for roadway lighting applications and standards From 32 to LEDs per board, to link precisely the amount of LEDs needed to achieve the right light level for all applications. 2 Philips Lumec

36 Optics RoadView Roadway Optics Significant light from HID lamps is lost or uncontrolled in traditional luminaires. LED s directional light output can be more easily captured and directed toward the roadway. Precision optical lenses in the Philips RoadView send light where it is needed, with very little waste. HID lamp with reflector LED with lens The HPS luminaire (left) concentrates a lot of light below and behind the pole. The LED luminaire provides more uniform lighting on the roadway, while minimizing light trespass. Superior downward street side lumens Lumens directed toward the roadway are downward street side lumens (DSSL). A typical flat-lens cobra head only manages about 40% DSSL. The Philips RoadView puts over 70% of its lumen output on the downward street side. Local roadway w HPS cobra head Philips RoadView Average illuminance (fc) Average luminance Meets RP8 uniformity yes yes Meets RP8 veiling luminance yes yes Source lumens* DSSL % 38 % 72 % DSSL lumens rating (IES TM-15-11) B2-U0-G2 B1-U0-G1 System wattage 1 56 Wattage savings 57 % * Source lumens are initial lamp lumens for HPS, luminaire lumens from LM-79 test for LED. Note: This is a representative example of a typical local roadway. Each lighting application is unique and should be examined individually. Efficiency with less energy Both fixtures satisfy IES RP-8-00 requirements for a local road, low pedestrian activity. The two calculations are performed at equal mounting height, pole spacing, and LLF. The LED solution saves energy with better utilization of lumen output. 3

37 Photometrics % Luminaire lumens Light emitted 39% 29% 20% IES Type II, Medium Typical LCS (IES TM-15-11) FL FM FH FVH BL BM BH BVH UL UH 13.9% 39.1% 19.4% 0.2% 8.9% 13.4% 5.0% 0.1% 0.0% 0.0% 10% Consult IES files for s Building side 0 Street side Maximizes distribution along the roadway Common applications: 2 and 3 lane roads, alleyways % Luminaire lumens Light emitted 37% 28% 19% IES Type III, Medium Typical LCS (IES TM-15-11) FL FM FH FVH BL BM BH BVH UL UH 13.6% 37.1% 19.6% 0.2% 8.8% 15.2% 5.5% 0.1% 0.0% 0.0% 9% Consult IES files for s Balances distribution along and across the roadway Building side 0 Street side Common applications: 3 and 4 lane roadways % Luminaire lumens Light emitted 33% 25% 17% IES Type IV, Short Typical LCS (IES TM-15-11) FL FM FH FVH BL BM BH BVH UL UH 9.1% 33.1% 28.9% 0.3% 8.8% 15.2% 4.4% 0.2% 0.0% 0.0% 8% Consult IES files for s Maximizes distribution across the roadway Building side 0 Street side Common applications: 4-6 lane roadways, areas with large pole setback 4 Philips Lumec

38 Electronics RoadView Roadway Technical Fixture RVS RVM Number of LEDs Lamps Typical wattage Lamp System Max. system current (amps) LED drive current (ma) 32 35W32LED4K W32LED4K W32LED4K W48LED4K W48LED4K W48LED4K W64LED4K W64LED4K WLED4K WLED4K W96LED4K W96LED4K W96LED4K W112LED4K W112LED4K W128LED4K W128LED4K W144LED4K W144LED4K W1LED4K W1LED4K CRI 70 minimum, Nominal ANSI CCT 4000K. Voltages UNIV : Universal (120 / 277 V) 347 : 347 V 4 : 4 V Philips SP1 surge protection The Philips SP1 surge protective device provides single phase protection for line/ neutral, line/ground and neutral/ground in accordance with IEEE C62.41 C High (10kV & 10kA). The SP1 small size corresponds to the design requirements of today s LED luminaires. Compliant to Elevated Electrical Immunity Requirement, per the U.S. Department of Energy Municipal Solid State Street Lighting Consortium Model Specification of LED Roadway Luminaires. Philips Xitanium driver Using state-of-the-art technology, Xitanium drivers deliver solid performance, high reliability and are fully compatible with a variety of LED lighting systems. UL Class 1 Rated UL Outdoor Damp location rated Extreme low temperature performance (-40 C) UL and cul recognized Current Crest Factor: 1.5 maximum Load Regulation: 5% output current variation across load range Line Regulation: 1% output voltage variation across input voltage range 5

39 Versatility The RoadView incorporates several features that make it a versatile luminaire. Easy to install Easy to maintain Tool free rotatable photocontrol receptacle Accommodates different types of control systems Accommodates 1.25" to 2" arm mounts Adjustable leveling features Reversible mounting accommodates different arm diameters Tenon 0-5 Built-in leveling adjustment + or 5 degrees. Angle Pénétration du tenon 3.75" 4.125" 4.5" 4.75" 5" 5 Adjustable photocontrol receptacle offers the ability to lift and rotate to desired direction. 6 Philips Lumec

40 RoadView Roadway Expandability Benefits From residential streets to major interstate highways, the RoadView s expandability provides the right product for the application. Modular design using castings and extrusions Multiple wattages Multiple drive currents Multiple lumen outputs Multiple optical distributions RVS RVM RVS RVM Single LED board + Double LED boards = Type II, III, or IV optics = Type II, III, or IV optics 32 and 48 LED 64 and LED 96, 112 and 128 LED 144 and 1 LED Available in two standard lengths Available in two standard lengths 7

41 Thermal management Gaskets Electronics and optical sections are independent and separated by a gasket reducing thermal conductivity between both chambers. Openings Large drain openings allow for chimney effect between the electrical and optical sections, improving cooling and thermal isolation. Heat sinks Extruded heat sink section is made of A63 aluminum which is over % more thermally conductive than a typical A3 cast housing. Drivers Mounted in their most thermally efficient position, upside down on the door which is acting as a heatsink. This mounting position greatly improves electronics cooling. Thermal simulation at an ambient temperature of 40 C The unique shape of the RoadView draws heat to where natural convection is superior, resulting in more efficient cooling and lower EPA. 8 Philips Lumec

42 RoadView Roadway Options and accessories Details Luminaire options BL : Bubble level PH8 : photocell and receptacle RC : Receptacle for photocell or a shorting cap SP1 Surge protective device Terminal block #2 - #14 AWG RC Receptacle for photocell or shorting cap SR Strain relief Reversible 4 bolt connection mounting BL Bubble level SR : Strain relief HS : Internal house side shield Driver options CDMG : Programmable step-dimming DMG : Dimming driver Luminaire Accessory SPC : StarSense Photo-cell Control (Luminaire option RC is required with this accessory) Mountings Reversible mounting accommodates different arm diameters. 4 Bolt connection Horizontal tenon 1.66" to 2.38" OD Adjust tilt +/- 5 Contact factory for additional mounting options Finishes The specially formulated Lumital powder coat finish is available in standard gray. Additional colors are available. Consult factory for complete specifications. 9

43 Maintenance RoadView incorporates a removable power door Quick disconnects provided Power door easily removable for maintenance or upgrade Tool free latch assembly allows for easy access to electrical compartment. 10 Philips Lumec

44 RoadView Roadway Smart controls Smart controls Some systems are luminaire based, some require local communication and some require mesh networks. Depending on the customer application needs Philips offers several different control solutions that will help manage your lighting system. These systems are built around 3 overall solution types: 1. Smart luminaires 2. Smart systems 3. Smart cities Features With the arrival of the high power LED luminaires, the control system has become a more important element of the overall lighting system. The various control systems available offer a variety of possibilities and complexities based on application and need. Some of the available features in today s control systems include: Dimming Energy consumption, metering Light on demand motion detector Constant light output End of life signaling Failure monitoring Temperature monitoring Diagnostics Fixture, circuit, wireless based Operational efficiency 1. Smart luminaires The smart luminaire lighting control system is a perfect complement to the latest in energy-efficient LED lighting solutions. Driving energysavings with minimum effort, the smart luminaire module is a compact and independent luminaire-based device that works in conjunction with easy-to-use software and programming equipment. It empowers users to set dimming times and levels when and as they wish, offers users true flexibility and is ideal for outdoor lighting of parking lots, residential streets and public areas. Autonomous Software included Easily programmable Individual luminaire schedules Small and large scale projects No maintenance fees RVM shown with control module and motion detector 11

45 Smart controls 2. Smart systems The smart lighting control system is a perfect complement for small to medium LED lighting applications. Driving energysavings with minimum effort, the smart system is a complete control solution that works in conjunction with easy-to-use software, communication and programming equipment. It empowers users to set dimming times and levels when and as they wish, using on-site software that communicates with each luminaire. This offers users true flexibility and is ideal for outdoor lighting of public areas. Small scale projects Single site operation No maintenance fees Onsite control station Metering (1%) precision Easy on-site commissioning Versatile programming options Programming from a single point of access Low cost software managed by customer Data management statistics available Dynamic schedule and special events capable Software installed on a local PC that connect to luminaire with a USB key transmitter 3. Smart cities The smart cities lighting control system is a perfect complement for large scale LED lighting infrastructures. Driving energy-savings with minimum effort, the smart cities lighting control system is a complete control solution that works in conjunction with internet based software, mesh network communications and programming equipment. It empowers users to set dimming times and monitoring the operational performance when and as they wish. The smart cities lighting control system is a complete web-based server solution with advanced communication design and easy integration to existing installations. This offers users true flexibility and is ideal for outdoor lighting for cities, departments of transportations, utilities and transit authorities. Large scale projects Extensive programming options World web access to control software Programming from multiple points of access Control and monitor multiple sites Monthly fee schedule Software managed by customer Onsite or offsite control station Data management statistics available On-site commissioning Metering (1%) precision Dynamic schedule and special events capable Alarms through SMS capable Turn key luminaire control system 12 Philips Lumec

46 RoadView Roadway One Philips Smart controls Philips is a global company of leading businesses creating value with meaningful innovations that improve the visibility of our roads and highways. With our collective passion, expertise, depth and reach, we open up new possibilities powered by advanced technologies. We are determined to innovate, collaborate and provide unsurpassed value to our customers. The Philips RoadView luminaire is a combination of our knowledge in LED design, optics, electronics and controls that brings all of these together into one unique and powerful luminaire designed around your needs. We don t simply manufacture luminaires, we design solutions. 13

47 2014 Koninklijke Philips N.V. All rights reserved. Philips reserves the right to make changes in specifications and/or to discontinue any product at any time without notice or obligation and will not be liable for any consequences resulting from the use of this publication. PLu-18BR 04/16 philips.com/luminaires Philips Lighting North America Corporation 200 Franklin Square Drive Somerset, NJ Tel Imported by: Philips Lighting, A division of Philips Electronics Ltd. 281 Hillmount Rd, Markham, ON, Canada L6C 2S3 Tel

48 Project name Type Date Prepared by RVM Luminaire Lamp Optical System Voltage Options Accessory Finish RoadView LED Series RVM 4.66 (118mm) 2.38 (61mm) (794mm) min (895mm) max. RVM Weight: 34 to 37 lbs (15.4 to 16.8 kg) (391mm) Lamps LUMINAIRE PERFORMANCE DATA (Nominal 4000K CCT) Weight Length EPA Lamp Drive LEDs Current Luminaire Lumens* System Watts Max. system current (amps) lb. kg. in. mm. sq. ft. sq. m. 110W96LED4K W96LED4K W96LED4K W112LED4K W112LED4K W128LED4K W128LED4K W144LED4K W144LED4K W1LED4K W1LED4K *For Type III distribution. See photometric files for other distributions.

49 Optical systems / LED LE2 LE3 LE4 LE5 TYPE II / Asymmetrical distribution TYPE III / Asymmetrical distribution TYPE IV / Asymmetrical distribution TYPE V / Symmetrical distribution UNIV ( ) Driver options ** AST Driver pre-programmed with progressive lamp starting* CDMG Dynadimmer standard dimming program* CDMGP Dynadimmer custom dimming program* CLO Constant Light Output, driver pre-programmed to achieve the same light intensity for the duration of the lifespan of the lamp* DALI Driver compatible with DALI control systems* DMG Dimmable driver 0-10 volt OTL Over The Life, driver pre-programmed to signal the end of lamp life* OVR Dynadimmer override function for use with motion detector or other switching device *Only available with volts. ** For all programmable options please consult the factory for details Luminaire options API ANSI/NEMA wattage label Surge protective device BL Bubble level OSL3W Motion detector (requires DMG or CDMG) PH8 Photoelectric cell, twistlock type includes receptacle RC Receptacle for a twist-lock photocell or shorting cap SR Strain relief Terminal block #2 - #14 AWG RC Receptacle for photocell or shorting cap SR Strain relief BL Bubble level Luminaire accessory SPC * StarSense Photo-cell Control * Luminaire option RC is required with this accessory Finish options Reversible 4 bolt connection mounting GY3 Gray BR Bronze Specifications subject to change without notice. WH White BK Black Consult factory for full details. EXP Extrusion painted to match cast housing color selected above (standard extrusion color is anodized aluminum). Additional colors are available. Consult factory for complete specifications.

50 Lamp Composed of high performance white LEDs. ANSI Nominal CCT of 4000K, minimum 70 CRI. Ambient operating temperature range -40C (-40F) to +40C (104F). L70 lumen maintenance projected to be greater than,000 hours. Optical system Composed of high performance lenses, protected by a flat tempered glass lens. System is rated IP66. Photometric performance is tested according to IES LM-79. Surge protector Surge protective device provides all phases protection for line-ground, line-neutral, and neutral-ground in accordance with IEEE / ANSI C C High. Surge rating 10 kv, 10 ka and DOE Model Specification for Roadway Luminaires Elevated requirements per Appendix D. Surge protection is standard for all product models 120-4v. Heat sink The extruded heat sink is made of A63 aluminum alloy, and is shaped to draw heat away from the LEDs. Product does not use any cooling device with moving parts (has passive cooling device). LED platform The LEDGINE LED platform consist of two LED boards with 48, 64, or LUXEON Rebel LEDs each, as required to provide total LEDs from The LED boards are removable and replaceable. Wiring Luminaire wiring is done using a terminal block located inside the housing. Terminal block accepts three wires (#2-14 AWG). Hardware and seals All hardware shall be stainless steel or corrosion resistant. All seals and sealing devices are lined with silicone. Driver Electronic driver, operating range 50- Hz. Auto-adjusting to input voltage between volt AC, or volt AC. Minimum power factor 0., max THD 20%. UL recognized component.,000 hours expected life. Optional dimming (0-10v) and digital driver features available. Housing The upper and lower parts of the housing are made of die cast A3 aluminum alloy. The 4-bolt mounting system includes a reversible bracket made of zinc plated steel. Fits on a 1.66 to OD by 5 long tenon, fixed by 3/8-16 UNC steel zinc plated bolts. An integral part of the housing permits an adjustment of +/- 5 o by steps of 2.5 o. Finish Application of a polyester powder coat paint. (4 mils/ microns). The chemical composition provides a highly durable UV and salt spray resistant finish in accordance with the ASTM-B117 standard and humidity proof in accordance with the ASTM-D2247 standard. The specially formulated Lumital powder coat finish is available in standard gray. Additional colors are available. Consult factory for complete specifications. Vibration resistance Meets the ANSI C table 2, American National Standard for Roadway Luminaire Vibration specifications for Bridge/overpass applications (3G). Power door The housing is complete with a tool-less removable power door including quick disconnects for ease of service. A tool free latch assembly on the power door allows for easy access to the electrical compartment. Certifications and Compliance CSA, UL or cul. ISO All electrical components are RoHS compliant. Listed on Design Lights Consortium (DLC) Qualified Products List (QPL) Koninklijke Philips N.V. All rights reserved. Specifications are subject to change without notice. RoadView RVM SpecSheet 11/14 page 3 of 3 Philips Lighting North America Corporation 200 Franklin Square Drive Somerset, NJ Phone: Philips Lighting Company 281 Hillmount Road Markham ON, Canada L6C 2S3 Phone:

51 Project name Type Date Prepared by RVS Luminaire Lamp Optical System Voltage Options Accessory Finish RoadView LED Series RVS 4.66 (118mm) 2.38 (61mm) (543mm) min (641mm) max. RVS Weight: 23.0 to 26.0 lbs (10.4 to 11.8 kg) (391mm) Lamps LUMINAIRE PERFORMANCE DATA (Nominal 4000K CCT) Drive Luminaire System Max. system Weight Length EPA Lamp LEDs Current Lumens* Watts current (amps) lb. kg. in. mm. sq. ft. sq. m. 35W32LED4K W32LED4K W32LED4K W48LED4K W48LED4K W48LED4K W64LED4K W64LED4K WLED4K WLED4K *For Type III distribution. See photometric files for other distributions.

52 Optical systems / LED LE2 LE3 LE4 TYPE II / Asymmetrical distribution TYPE III / Asymmetrical distribution TYPE IV / Asymmetrical distribution UNIV ( ) (not available for 32 LED models) Driver options ** AST Driver pre-programmed with progressive lamp starting* CDMG Dynadimmer standard dimming program* CDMGP Dynadimmer custom dimming program* CLO Constant Light Output, driver pre-programmed to achieve the same light intensity for the duration of the lifespan of the lamp* DALI Driver compatible with DALI control systems* DMG Dimmable driver 0-10 volt OTL Over The Life, driver pre-programmed to signal the end of lamp life* OVR Dynadimmer override function for use with motion detector or other switching device *Only available with volts. ** For all programmable options please consult the factory for details Luminaire options API ANSI/NEMA wattage label Surge protective BL Bubble level device OSL3W Motion detector (requires DMG or CDMG) PH8 Photoelectric cell, twistlock type includes receptacle PH8XL * Photoelectric Cell, Twist lock Type, Fail ON, extended life 10-year limited warranty from supplier RC Receptacle for a twist-lock photocell or shorting cap SR Strain relief * Not available with 347 and 4 volt. Terminal block #2 - #14 AWG RC Receptacle for photocell or shorting cap SR Strain relief BL Bubble level Luminaire accessory SPC * StarSense Photo-cell Control * Luminaire option RC is required with this accessory Finish options Reversible 4 bolt connection mounting GY3 WH Gray White BR BK Bronze Black Specifications subject to change without notice. Consult factory for full details. EXP Extrusion painted to match cast housing color selected above (standard extrusion color is anodized aluminum). Additional colors are available. Consult factory for complete specifications.

53 Lamp Composed of high performance white LEDs. ANSI Nominal CCT of 4000K, minimum 70 CRI. Ambient operating temperature range -40C (-40F) to +40C (104F). L70 lumen maintenance projected to be greater than,000 hours. Optical system Composed of high performance lenses, protected by a flat tempered glass lens. System is rated IP66. Photometric performance is tested according to IES LM-79. Surge protector Surge protective device provides all phases protection for line-ground, line-neutral, and neutral-ground in accordance with IEEE / ANSI C C High. Surge rating 10 kv, 10 ka and DOE Model Specification for Roadway Luminaires Elevated requirements per Appendix D. Surge protection is standard for all product models 120-4v. Heat sink The extruded heat sink is made of A63 aluminum alloy, and is shaped to draw heat away from the LEDs. Product does not use any cooling device with moving parts (has passive cooling device). LED platform The LEDGINE LED platform consist of two LED boards with 48, 64, or LUXEON Rebel LEDs each, as required to provide total LEDs from The LED boards are removable and replaceable. Wiring Luminaire wiring is done using a terminal block located inside the housing. Terminal block accepts three wires (#2-14 AWG). Hardware and seals All hardware shall be stainless steel or corrosion resistant. All seals and sealing devices are lined with silicone. Driver Electronic driver, operating range 50- Hz. Auto-adjusting to input voltage between volt AC, or volt AC. Minimum power factor 0., max THD 20%. UL recognized component.,000 hours expected life. Optional dimming (0-10v) and digital driver features available. Housing The upper and lower parts of the housing are made of die cast A3 aluminum alloy. The 4-bolt mounting system includes a reversible bracket made of zinc plated steel. Fits on a 1.66 to OD by 5 long tenon, fixed by 3/8-16 UNC steel zinc plated bolts. An integral part of the housing permits an adjustment of +/- 5 o by steps of 2.5 o. Finish Application of a polyester powder coat paint. (4 mils/ microns). The chemical composition provides a highly durable UV and salt spray resistant finish in accordance with the ASTM-B117 standard and humidity proof in accordance with the ASTM-D2247 standard. The specially formulated Lumital powder coat finish is available in standard gray. Additional colors are available. Consult factory for complete specifications. Vibration resistance Meets the ANSI C table 2, American National Standard for Roadway Luminaire Vibration specifications for Bridge/overpass applications (3G). Power door The housing is complete with a tool-less removable power door including quick disconnects for ease of service. A tool free latch assembly on the power door allows for easy access to the electrical compartment. Certifications and Compliance CSA, UL or cul. ISO All electrical components are RoHS compliant. Listed on Design Lights Consortium (DLC) Qualified Products List (QPL) Koninklijke Philips N.V. All rights reserved. Specifications are subject to change without notice. RoadView RVS SpecSheet 05/14 page 3 of 3 Philips Lighting North America Corporation 200 Franklin Square Drive Somerset, NJ Phone: Philips Lighting Company 281 Hillmount Road Markham ON, Canada L6C 2S3 Phone:

54 Roadway StreetView Exceptional optical performance Featuring an ingenious thermal design at an unbeatable value

55 When superior performance and low price come together to fulfill a client s need The Philips StreetView LED luminaire is designed for many applications. It will efficiently illuminate major roads, collector roads, city streets, intersections, adjoining roadways, bridges and overpasses, and it is also a great choice for local roads and residential streets. The efficient design and optics make the StreetView perfect for small and medium road lighting needs because it will ensure maximum reliability and security at night for both drivers and citizens. And to up the charm factor StreetView is as easy to install as it is to maintain. Powered by the Philips LEDgine platform and featuring innovative thermal management design, this LED luminaire has two major assets: exceptional performance and unbeatable value. Low price StreetView is a practical, straightforward and inexpensive lighting solution. This totally affordable LED outdoor lighting product is the perfect choice to replace HID Cobra Heads. It is the first LED roadway Cobra Head luminaire that can be sold close to HID prices because it is a standardized product available with the specific features and accessories you need. The innovative thermal management design enables a more compact yet very efficient product. Important R&D efforts went into developing this innovative design in order to create a cost effective solution for thermal management that is robust and reliable. StreetView is a compact and low weight lighting product that is easy to handle and makes for lower shipping and warehouse costs. Superior optical performance Fitted with the latest LED technology, StreetView needs no protective glass lens which means even better photometric performance. The LED light modules are IP66 sealed so no additional luminaire lens is required. Therefore, you get more target lumens for perfect lighting uniformity and intensity with improved efficacy versus a luminaire with a protective glass lens. Getting more lumen output on the ground allows you to get optimized spacing compared to a luminaire with a protective glass lens. No glass lens also reduces the cost and weight of the luminaire. 2 Philips Lumec

56 StreetView Roadway At a glance Features Specific features, standardized product. Light-weight luminaire Low Effective Projected Area (EPA) Tool-free access to electrical compartment Perfect for retrofit projects 2 bolt connection mounting, single clamp Tilt +/- 5 by steps of 2.5 High-performance white LEDs Dedicated LED optics / types 2, 3 & 5 IP66-rated LEDgine Innovative thermal management Energy efficient luminaire Standard model comes with dimmable driver 0-10V feature code (DMG) Made from sustainable materials Benefits Easier stock ordering Short lead time for standard luminaire / Ready to ship Low price, 10-year warranty standard Easy installation Outstanding durability and robust luminaire Reduces pole and bracket investment Less material consumption leading to more environmentally friendly product Easy maintenance Quick installation saves time and money Replaces traditional HID technology (Cobra Heads) up to 250W Replaces dusk to dawn luminaires Accommodates different arm diameters Easy installation Integral adjustable leveling features The latest LED technology provides a higher light output and improved efficacy, compared to standard high-powered LEDs Ensures maximum reliability and safety for drivers and citizens Provides high-quality, uniform light distribution Better light trespass control Protects the LEDs from degradation caused by environmental pollutants such as rain, ice, snow, dust, sand, etc. No additional luminaire glass lens required System lifespan of components and driver up to,000 hours Suitable for operation in an ambient temperature range of -40 C / -40 F up to +40 C / +104 F (runs cool in many climates) High lumen per watt (LPW) ratio generates considerable energy savings with excellent lumen maintenance (Projected to reach,000+ hours with > L70 lumen maintenance at 25 C) Future proof possibilities for lighting adaptability and cost savings Easy to add control features Projects a green image that pleases citizens and investors % recyclable without driver 3

57 Superior technology, superior performance LED's StreetView uses the latest LED technology to meet the strictest outdoor lighting standards. With a high color rendering index (CRI) and exceptional lumen output, these LEDs meet the most stringent standards required by municipalities and utilities today. IP66-rated LED modules This supreme LED module is the unparalleled Philips LEDgine platform. These LED IP66-rated modules protect the LEDs from degradation caused by environmental pollutants such as rain, ice, snow, dust, sand, etc. IP66 seal with quick-connect wiring and no glass lens on the luminaire means LED modules are easy to remove and replace in the field. Optical performance 4 Philips Lumec 4 Philips Lumec Fitted with the latest LED technology, StreetView needs no protective glass lens which means even better photometric performance. Dedicated LED optics (types 2, 3 and 5) provide high-quality uniform light distribution with high efficacy (LPW). Excellent light control puts more lumens on the roadway and results in no uplight (U0 per IESNA TM-15, Dark Sky compliant).

58 StreetView Roadway Pole spacing Technology StreetView offers pole spacing up to 8 x mounting height because of the advanced optical system. Therefore, fewer luminaires are required to meet lighting requirement which provides important financial and energy savings. StreetView 8 x mounting height Competitor 6 x mounting height House side shield efficacy The specially designed House Side Shield of the StreetView allows for better backlight control with less light loss compared to other products available on the market, and its tool-free field installation means less hassle. StreetView with house side shield Competitor with house side shield Uniformity Whether it is a new installation or a retrofit on an existing installation, as seen below, StreetView offers better uniformity which means improved lighting and security for drivers and citizens. In the example below of StreetView versus a typical HID Cobra Head installation, you can easily see the improved uniformity in lighting that StreetView provides. StreetView Competitor (HID) 5

59 Photometrics % Luminaire Lumens Uplight 34% % Luminaire Lumens Uplight 36% % Luminaire Lumens Uplight 27% 26% 27% 20% 17% 18% 13% 9% 9% 7% Back 0 Front Back 0 Front Back 0 Front IES Type II Typical LCS (IES TM-15-11) FL FM FH FVH BL BM BH BVH UL/UH 10.6% 34.0% 26.9% 0.7% 8.2% 12.3% 6.8% 0.4% 0.0% Consult IES files for s IES Type III Typical LCS (IES TM-15-11) FL FM FH FVH BL BM BH BVH UL/UH 11.3% 35.7% 26.0% 0.4% 8.3% 11.5% 6.3% 0.4% 0.0% Consult IES files for s IES Type V Typical LCS (IES TM-15-11) FL FM FH FVH BL BM BH BVH UL/UH 4.2% 19.5% 26.6% 0.3% 4.3% 10.0% 24.8% 0.3% 0.0% Consult IES files for s % Luminaire Lumens Uplight 43% % Luminaire Lumens Uplight 44% 32% 33% 21% 22% 11% 11% Back 0 Front Back 0 Front IES Type II (with HS) Typical LCS (IES TM-15-11) FL FM FH FVH BL BM BH BVH UL/UH 13.34% 42.6% 28.8% 0.3% 5.1% 6.8% 3.0% 0.1% 0.0% Consult IES files for s IES Type III (with HS) Typical LCS (IES TM-15-11) FL FM FH FVH BL BM BH BVH UL/UH 13.3% 43.8%.0% 0.3% 4.6% 5.7% 2.3% 0.1% 0.0% Consult IES files for s Note: The optical distributions shown are examples of the SVM-140W48LED4K-G2. Consult StreetView IES files for specific optical performance criteria for these and all other StreetView configurations. Standardized product = Ready to ship StreetView is a low cost luminaire that comes with specific features required to answer the needs and the demands of roadway applications. With this complete standard offering, including the receptacle for a twist-lock photocell or shorting cap and the dimmable driver 0-10V, this luminaire is a breeze to order, and it is project ready and ships complete. Some accessories, like the house side shield, can be added to your order without impacting our shipping commitment. These accessories were designed so they are easy to fit on the luminaire during or after installation in the field. 6 Philips Lumec

60 Lighter StreetView is up to 65% lighter than competitive products with the same lumen output. The result is tons of material saved in a typical large installation. StreetView is made of recycled aluminum and can be taken apart upon end of life. We are proud that this luminaire is % recyclable (without driver). As with most of our products, we developed StreetView as a green product that will please citizens and investors. Sustainability Thanks to its breakthrough design, StreetView has one of the highest ratios of lumen/product volume and lumen/product weight in the industry. This low weight not only makes the product environmentally friendly by its low material usage, but it also makes life easier for the installer and can represent significant cost savings in shipping and warehouse space usage. The compact size of the luminaire and its light weight make it possible to stack more boxes of luminaires on the same skid compared to other roadway lighting products. Therefore you need less space for storage and the fees related to transportation will drop significantly given the reduced weight of the load. The loading process will definitely be much more manageable and effortless. StreetView Roadway Technology Innovative thermal management Airflow driven by natural convection from the temperature difference between the upper and lower zones efficiently draws heat away. Primary airflow circulating vertically through 2 accelerated airflow cooling chimneys. Secondary airflow circulating horizontally through the 3 upper cooling channels. StreetView is engineered to minimize material usage and maximize cooling. Its innovative natural convection chimney design allows airflow to efficiently cool all LED modules equally and keeps them at low temperature and perfectly balanced ensuring,000+ hours with > L 70 lumen maintenance at 25 C. LED drivers are also maintained at low temperatures for long life and exceptional reliability. An ingenious feature provides a much sought after benefit. The product is designed with two unique accelerated airflow cooling chimneys, so even if debris were present on the luminaire, the cooling would still work because the primary airflow would still be able to circulate vertically. Wide heat sink channels enable natural cleaning and removal of debris 7

61 Technical data and ordering information Dimensions 4" (103mm) " (469mm) " (2mm) SVS Conform to UL 1598 and CSA C22.2 No standards. Suitable for operation in an ambient temperature range of -40 C / -40 F up to +40 C / +104 F. The StreetView meets ANSI C table 2, American National Standard for Roadway Luminaire Vibration specifications for Bridge/ overpass applications. Tested for 3G over,000 cycles by an independent lab. 8 Philips Lumec Weight: 9.8 lbs (4.5 kg) EPA: 0.51 sq ft

62 StreetView Roadway SVM Technical information Specifications CRI = 70 min CCT = 4000 K nominal (3985K +/- 275K or 3710K to 42K) System (LED + driver) rated life =,000 hrs 1 Typical Typical System Typical LED Luminaire LED system Current delivered current Efficacy Module wattage lumens (ma) 120V 208V 240V 277V 347V 4V (Lm/W) (W) 2 rating 16W16LED4K-G2-LE B1-U0-G1 16W16LED4K-G2-LE B1-U0-G1 16W16LED4K-G2-LE B2-U0-G0 22W16LED4K-G2-LE B1-U0-G1 22W16LED4K-G2-LE B1-U0-G1 22W16LED4K-G2-LE B2-U0-G1 N/A 24W16LED4K-G2-LE B1-U0-G1 24W16LED4K-G2-LE B1-U0-G1 24W16LED4K-G2-LE B2-U0-G1 W16LED4K-G2-LE B1-U0-G1 W16LED4K-G2-LE B1-U0-G1 W16LED4K-G2-LE B3-U0-G1 32W32LED4K-G2-LE B1-U0-G1 32W32LED4K-G2-LE B1-U0-G1 32W32LED4K-G2-LE B3-U0-G1 48W32LED4K-G2-LE B2-U0-G1 48W32LED4K-G2-LE B2-U0-G1 48W32LED4K-G2-LE B3-U0-G1 W32LED4K-G2-LE B2-U0-G2 W32LED4K-G2-LE B2-U0-G2 W32LED4K-G2-LE B3-U0-G1 48W48LED4K-G2-LE B2-U0-G1 48W48LED4K-G2-LE B2-U0-G2 48W48LED4K-G2-LE B3-U0-G1 72W48LED4K-G2-LE B2-U0-G2 72W48LED4K-G2-LE B2-U0-G2 72W48LED4K-G2-LE B3-U0-G2 W48LED4K-G2-LE B2-U0-G2 W48LED4K-G2-LE B2-U0-G2 W48LED4K-G2-LE B4-U0-G2 140W48LED4K-G2-LE B3-U0-G3 140W48LED4K-G2-LE N/A 99 B3-U0-G3 140W48LED4K-G2-LE B4-U0-G2 Note: Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of Philips. IES files with HS house side shield option are also available contact the factory. 1. L 70 > 10 0,000 hrs (at ambient temperature = 25 C) 2. System wattage or total luminaire wattage includes the lamp and the LED driver Optical System / LED Composed of high performance optical grade polymer refractor lenses to achieve desired distribution, optimized to get maximum spacing, target lumens and superior lighting uniformity. Photometric testing performed in accordance with IESNA LM-79 guidelines. ratings and zonal lumens in accordance with IESNA TM-15. LE2 Type II : Asymmetrical Distribution LE3 Type III : Asymmetrical Distribution LE5 Type V : Symmetrical Voltages UNIV : 120 / 277 (16 LED, 32 LED, 48 LED) HVU : 347 / 4 (32 LED, 48 LED*) * Not available in 140W48LED versions. 9

63 Integrated features Please note that these integrated features always come with StreetView luminaire. RC* Receptacle for a twist-lock photocell or shorting cap DMG SP1 Dimmable driver 0-10V Surge protection device tested in accordance with ANSI/IEEE C62.45 per ANSI/IEEE C Scenario I Category C High Exposure 10kV/10kA waveforms for Line-Ground, Line-Neutral and Neutral-Ground, and in accordance with DOE MSSLC Model Specification for LED Roadway Luminaires Appendix D Electrical Immunity High test level 10kV/10kA. * Use of photocell or shorting cap is required to ensure proper illumination. Luminaire accessories Quickly and easily installed in the field. Ordered as separate line items. RC Not available with HVU: 347 / 4 volt. SPC1 Starsense Photo-cell Control PH8 PH8/347 PH8/4 Photoelectric cell HS SPC HS RCPH8 PH8XL PH9 HS Photoelectric Cell, Twist lock Type, Fail ON, extended life / 10-year limited warranty from supplier. Shorting Cap House side shield HS PH9 PH8 SPC PH8 PH9 RCPH9 SPC SPC RC HS RC Luminaire and Driver Options SP2 CLO 1 AST 1 OTL 1 AMPD 1 CDMG 1 DALI 1 20kV/20kA surge protection device that provides extra protection beyond the SP1 10kV/10kA level. Pre-set driver to manage the lumen depreciation by adjusting the power given to the LEDs offering the same lighting intensity during the entire lifespan of the LEDmodule(s). Pre-set driver for progressive start-up of the LED module(s) to optimize energy management and enhance visual comfort at start-up. Pre-set driver to signal end of life of the LED module(s) for better fixture management. Driver preprogrammed for compatibility with Amplight control system. Dynadimmer standard dimming functionalities including preprogrammed scenarios to suit many applications and needs from safety to maximum energy savings. Pre-set driver compatible with the DALI control system. 1. Not available with 347/4V or 140W48LED versions. See specification sheets for Ordering Guide and footnotes, exact catalog logic and details. Mounting Poles 2 bolt connection mounting, single clamp. ATR85 (1.66 OD, 1.9 OD, OD) (1 1/4, 1 1/2 and 2 NPS pipe tenon). USS5050 Accommodates different arm diameters + tilt. DAVIT TER PRE TER ADJ RLAR ADJ RLAR ATR85 ATR85 USS5050 USS5050 Consult the Philips Pole Series for details and the complete line of brackets by visiting: PRE DAVIT TER PRE 10 Philips Lumec TERPRE ADJTER ADJ TER RLARADJ RLAR ADJ RLAR RLAR

64 Ordering example Please note that the luminaire accessories are not part of the ordering guide example. They need to be ordered as separate line items. Luminaire LED Module Optical System Voltage Integrated Features Luminaire Options Accessories Finish SVM 140W48LED4K-G2 LE3 UNIV DMG-RC SP2 HS-PH8 GY3 Easy installation* NOTE: Electrical power must be disconnected before installation. 1. Push the latch to release the access door. Slide the fixture onto the tenon. 2. Horizontal angle can be adjusted. Evenly tighten the two bolts of the bracket. 3. Connect the service leads to the terminal block. 4. Install accessories. PH8, PH8XL, PH9 and SPC** StreetView accessories or other compatible device can be installed in the receptacle. Luminaire does not need to be opened. House Side Shield (HS)** Match the optics alignment pin with the hole in the house side shield. Snap the house side shield to the optics. No tools required. Luminaire does not need to be opened. * Consult complete installation instruction document for more details. ** PH8, PH9, SPC and HS must be ordered as accessories. Use of photocell or shorting cap is required to ensure proper illumination. 11

65 2016 Philips Lighting Holding B.V. All rights reserved. Philips reserves the right to make changes in specifications and/or to discontinue any product at any time without notice or obligation and will not be liable for any consequences resulting from the use of this publication. PLu-11BR 02/16 Philips Lighting North America Corporation 200 Franklin Square Drive Somerset, NJ Tel Philips Lighting Canada Ltd. 281 Hillmount Rd, Markham, ON, Canada L6C 2S3 Tel

66 Roadway StreetView Project: Location: Cat.No: Type: Lamps: Notes: Qty: The Philips Lumec StreetView LED luminaire is designed for many applications that require medium intensity lighting. Powered by the Philips LEDgine platform and featuring innovative thermal management design, this LED luminaire has two major assets: exceptional performance and unbeatable value. Ordering guide example: SVM-W48LED4K-G2-LE3-UNIV-DMG-RC-HS-GY3 Luminaire LED Module Optical System Voltage Driver and Dimming Twist-Lock Receptacle Surge Protection Luminaire Accessories Finish SVM RC GY3 SVM StreetView Medium 16W16LED4K-G2 4 or 22W16LED4K-G2 4 or 24W16LED4K-G2 4 or W16LED4K-G2 4 or 32W32LED4K-G2 or 48W32LED4K-G2 or W32LED4K-G2 or 48W48LED4K-G2 or 72W48LED4K-G2 or W48LED4K-G2 or 140W48LED4K-G2 2,4 LE2 Type II LE3 Type III LE5 Type V UNIV VAC: 16 LED 32 LED 48 LED 140W 48 LED HVU 347-4VAC: 32 LED 48 LED Standard: DMG 1,5 Dimmable driver 0-10V Optional: (not available for 140W48LED) AMPD 2,4,5 Amplight Dimming Dynadimmer Economy Profile CDMGE25 2,4,5 CDMGE50 2,4,5 CDMGE75 2,4,5 Median Profile CDMGM25 2,4,5 CDMGM50 2,4,5 CDMGM75 2,4,5 Safety Profile Standard: RC 1,3 Receptacle for twist-lock photocell or shorting cap Standard: None (leave blank) Optional: SP2 6 20kV / 20kA Surge Protector HS House side shield, 1 per 16 LED light engine PH8 3,4 Twist-lock Photoelectric Cell, UNIV ( VAC) PH8/347 3 (not available for 140W48LED) Twist-lock Photoelectric Cell, HVU (347VAC) PH8/4 3 (not available for 140W48LED) Twist-lock Photoelectric Cell, HVU (4VAC) GY3 Grey finish CDMGS25 2,4,5 CDMGS50 2,4,5 CDMGS75 2,4,5 DALI 2,4,5 Digitally Addressable Lighting Interface DMG-AST * 2,4 Adjustable Startup Time DMG-CLO * 2,4,5 Constant Light Output PH8XL 3,4 Twist-lock Photoelectric Cell, extended life, UNIV ( VAC) PH9 3 Shorting cap SPC 3,7 Starsense Photocell Control DMG-OTL * 2,4 Over The Life *Includes 0-10v dimming 1. Please note these integrated features come standard with StreetView luminaires. 2. Denotes programmable driver option. Not available with HVU (347-4volt). Not available with 1050 ma version (140W48LED). 3. Use of photoelectric cell or shorting cap is required to ensure proper illumination. 4. Not available with HVU (347-4volt). 5. Dimming choices: Select either DMG or AMPD or one of the CDMG options or DALI. 6. When SP2 option is selected you will get SP2 instead of standard SP1. 7. Please note that more hardware as well as software are required. Please contact the quotations department for help with putting together the entire control system. StreetView_SMV_SpecSheet 02/16 page 1 of 4