Options V V V V V V UNV V (50/60Hz) HVU V (50/60Hz)

Transcription

1 PowerForm Project: Location: Cat.No: Type: Qty: Notes: PFF Philips Gardco PowerForm floodlight LED luminaires provide up to 1,500W HID replacement while significantly reducing energy and maintenance costs. PowerForm features a modular housing design available in five different sizes for a range of commercial, retail, industrial, and other outdoor floodlighting applications. PowerForm is available with multiple lumen packages delivering approximately 20,000 to 100,000 lumens. Ordering guide example: PFF-184L-1A-NW-G1-YK-SP-120-PCB-F1-BZ Luminaire PFF Number of LEDs Drive Current LED Color - Generation NW-G1 Mounting Distribution Voltage Options Controls Electrical Finish PFF PowerForm Flood 92L 92 LEDs (2 modules) 138L 138 LEDs (3 modules) 184L 184 LEDs (4 modules) 230L 230 LEDs (5 modules) 276L 276 LEDs (6 modules) Note: 46 LEDs per module ma 1A 1 Amp NW-G1 Neutral White 4000K, 70 CRI Generation 1 SF Slip Fitter Mount (fits to 2 3 8" O.D. tenon) YK Yoke Mount A33 Asymmetric 33 Flood RM Rectangular Medium Flood SP Spot (12 round) AIRP Airport Apron Flood V V V V V V UNV V (50/60Hz) HVU V (50/60Hz) DD 0-10V Dimming Driver DynaDimmer: Automatic profile dimming CS50 Safety 50% Dimming, 7 hours 1,2 CM50 Median 50% Dimming, 8 hours 1,2 CE50 Economy 50% Dimming, 9 hours 1,2 DA50 All Night 50% Dimming 1,2 Photoelectric/Receptacle systems (Twist Lock Receptacle) PCB Photocontrol Button 3,5,8 TLRD5 Twist Lock Receptacle 5 Pin 3,4 TLRD7 Twist Lock Receptacle 7Pin 3,4 TLRPC Twist Lock Receptacle w/photocell 3,5 Pole mounted Infrared Motion Response systems with DynaDimmer CS50-IMRO with Safety 50% Dimming 1,6 CM50-IMRO with Median 50% Dimming 1,6 CE50-IMRO with Economy 50% Dimming 1,6 DA50-IMRO with All Night 50% Dimming 1,6 Wireless sontrols LLC3 Module with #3 lens 1,2,3,8 LLC4 Module with #4 lens 1,2,3,8 Network system (SiteWise) SW SW Integral module 9,10 SW-IMRO Pole mounted motion response option Fusing Textured F1 Single BK Black (120, 277, 347VAC) 8 WH White F2 Double BZ Bronze (208, 240, 480VAC) 8 DGY Dark Gray F3 Canadian Double Pull (208, 240, 480VAC) 8 MGY Medium Gray Customer specified Pole Mount Fusing FP1 Single (120, 277, 347VAC) 8 FP2 Double RAL Specify optional color or RAL (ex: OC-LGP or OC-RAL7024) (208, 240, 480VAC) 8 FP3 Canadian Double Pull (208, 240, 480VAC) 8 Surge Protection CC Custom color (Must supply color chip for required factory quote) SP2 20KV 10KA VAC SP2HV 20KV 10KA VAC 1. Not available with Dimming Driver (DD) option. 2. Available in V or UNV only. 3. Choose PCB or one of the TLRD Twist Lock Receptacle options or one of the LLC Wireless options. 4. TLRD5/7 option not available with LLC, PCB or TLRPC. Max aiming angle 45. Works with 3 or 5 pin NEMA photocell/ dimming. Dimming will not be connected to NEMA receptacle if ordering with DD, CS/CM/CE/DA and IMRO. 5. Not available with 480V. 6. IMRO option available in 120 or 277V only. Must specify voltage. Not available with DD or LLC. 7. LLC not available with 230L-1A or 276L-1A in 120, 208 and 240V. Not available with TLRPC, PCB, CS/CM/CE/DA or LLCR accessory. 8. Must specify specific input voltage. 9. SW option is not available with any other control options with the exception of SW-IMRO motion response options. 10. Available only on 120V and 277V PFF 06/17 page 1 of 11

2 PowerForm Accessories 1 (ordered separately, field installed, specify finish at placeholder F) Controls Accessories Shielding Accessories Mounting Accessories Pole Mount Motion Sensor MS-A-120V 120V Input 2 MS-A-277V 277V Input 2 Wireless system Remote mount module LLCR2-(F) #2 lens 3 LLCR3-(F) #3 lens 3 LLCR4-(F) #4 lens 3 Glare shield (black finish) GS-PFF LEDs (2 modules) GS-PFF LEDs (3 modules) GS-PFF LEDs (4 modules) GS-PFF LEDs (5 modules) GS-PFF LEDs (6 modules) SM-18-(F) Stanchion Mount Wall Bracket (2 3 8" round tenon) WRAB-(F) Wall Offset, Right Angle (5 5 8" depth) WRABH-14-(F) 14.5" Wall Offset, Right Angle (5 5 8" depth) WVT-2-(F) Vertical Tenon ( depth) Square Pole Tenon Reducer Bracket (2 3 8" round tenon X 4" depth) SPTR-4-(F) Mounts over 4" sq. pole SPTR-5-(F) Mounts over 5" sq. pole Central remote motion response Round Pole Tenon Reducer Bracket (2 3 8" round tenon X 4" depth) (used connected to SiteWise main panel) MS2-A-FVR-3 RPTR-4-(F) RPTR-5-(F) Mounts over 4" dia. pole Mounts over 5" dia. pole MS2-A-FVR-7 Bullhorns (requires pole top tenon of 4" OD x depth x 0.22 thick) GMD102M-PFF-(F) Twin Mount 180 GMD103M-PFF-(F) Triple Mount 180 GMD104M-PFF-(F) Quad Mount Accessories must be ordered separately; requires field installation. GMD115M-PFF-(F) 5 Mount 180 (requires pole top tenon 0.3 thick) For additional information, see accessories information on following pages. GMY103M-PFF-(F) Triple Mount MS-A-120 or 277V for use with IMRO option (note pole requirements on page 4/5. GMX104M-PFF-(F) Quad Mount Luminaire configuration must include Dimming Driver 'DD' option when Wireless system is specified. LED Wattage and Lumen Values LED Current (ma) Average System Watts 1 Lumen Outputs 1, 2 Total Module Color A33 RM SP AIRP Ordering Code LEDs Qty Temp. A33 Efficacy RM Efficacy SP Efficacy AIRP Efficacy PFF-92L-700-NW-G K PFF-92L-1A-NW-G K PFF-138L-700-NW-G K PFF-138L-1A-NW-G K PFF-184L-700-NW-G K PFF-184L-1A-NW-G K PFF-230L-700-NW-G K PFF-230L-1A-NW-G K PFF-276L-700-NW-G K PFF-276L-1A-NW-G K Wattage and lumen output may vary by +/- 8% due to LED manufacturer forward volt specification and ambient temperature. Wattage shown is average for 120V through 277V input. Actual wattage may vary by an additional +/- 10% due to actual input voltage. 2. Lumen values based on photometric tests performed in compliance with IESNA LM Contact outdoorlighting.applications@philips.com for details or additional information. PFF 06/17 page 2 of 11

3 Distributions 3 setback & 0 tilt 3 setback & 0 tilt 3 setback & 0 tilt 3 setback & 30 tilt 3 setback & 25 tilt 3 setback & 50 tilt 3 setback & 0 tilt Yoke Mount Drill Template Slipfitter Aiming Diagram Drill Template 2x ø.53 x 1.25" ø Mounting Hole Pattern PFF 06/17 page 3 of " 3.85"

4 PFF PowerForm 6 Mo 5 Module (230L) Dimensions Slipfitter Mount (SF) 4 Module (184L) 3 Module (138L) 2 Module (92L) (838mm) (737mm) (638mm) (539mm) 33" 29" " " 6 Module (276L) 5 Module (230L) No. of Modules 0 Aim 45 Aim 90 Aim " 33" 29" (940mm) (838mm) (737mm) Effective Projected Area (EPA-ft2) Weight of single luminaire PFF SF 52 lbs (23.6 kg) 62 lbs (28.1 kg) 72 lbs (32.7 kg) 81 lbs (36.7 kg) 91 lbs (41.3 kg) Note: Applies to single PFF luminaire with (SF) Slipfitter mount at the following angles: 0 is horizontal to ground, 90 is perpendicular to the ground as shown in drawings. 6 Mo Dimensions Yoke Mount (YK) 4 Module (184L) 3 Module (138L) 2 Module (92L) 5 Module (230L) 21 4" 5 Module (230L) 6 Module (276L) (838mm) (737mm) (638mm) (539mm) 33" 29" " 1 (940mm) (838mm) (737mm) No. of Modules 33" 29" 37" Effective Projected Area (EPA-ft2) 0 Aim 45 Aim 90 Aim Weight of single luminaire PFF YK 56 lbs (25.4 kg) 66 lbs (29.9 kg) 76 lbs (34.5 kg) 86 lbs (39 kg) 94 lbs (42.6 kg) Note: Applies to single PFF luminaire with (YK) Yoke mount at the following angles: 0 is horizontal to ground, 90 is perpendicular to the ground as shown in drawings. PFF 06/17 page 4 of 11

5 Luminaire options DD: 0-10V dimming driver with leads supplied through back of luminaire (for secondary dimming controls by others). Dynadimmer Automatic Profile Dimming: Automatic dimming profiles (CS50/CM50/ CE50) offer safety, median, or economy settings, for shorter or longer duration. Dimming profiles provide flexibility towards energy savings goals while optimizing light levels during specific dark hours. 50% dimming is standard. DA50 offers 50% instantaneous dimming all night (during all dark hours). 75% and 25% dimming is also available if different light levels are required (contact Technical Support for details). Dimming Profile Schedule Duration Level Economy 9 PM - 6 AM 9 hours 50% Median 10 PM - 6 AM 8 hours 50% Safety 11 PM - 6 AM 7 hours 50% Reactive 50 all night dynamic 50% TLRD5*: Twist Lock Receptacle with 5 pins enabling dimming, can be used with a twistlock photoelectric cell or a shorting cap. Can also be used with Philips or third party control system. Receptacle located on top of luminaire housing. TLRD7*: Twist Lock Receptacle with 7 pins enabling dimming and additional functionality (by others), can be used with twistlock photoelectric cell or a shorting cap. Can also be used with Philips or third party control system. Receptacle located on top of luminaire housing. TLRDPC*: Twist Lock Receptacle with 5 pins and includes 3 pin twistlock photoelectric cell (must specify voltage). Receptacle located on top of luminaire housing. *NOTE: Maximum aiming angle is 45 with TLRD5, TLRD7 and TLRDPC in order to maintain IP66 rating around the Twist Lock Receptacle; Light Engines and the rest of the luminaire maintain IP66 rating at all aiming angles. UL Wet Location rating is also maintained at all aiming angles. IMRO: Infrared Motion Response Outboard pole mounted sensor, must be specified with an available automatic profile dimming option. Combines the benefits of both automatic profile dimming and motion response using the Philips DynaDimmer technology. PIR sensor features a pole mounted Wattstopper EW W or the EW W. One motion sensor per pole is required (order MS-A-120 or MS-A-277 separately). Available in 120 or 277V only, IMRO sensors require single voltage 120V or 277V input (see chart for approximate detection patterns). If motion is detected during the time that the luminaire is operating at profile dimming mode specified, the luminaire returns to 100% power and light output. The luminaire remains on high until no motion is detected for the duration period, after which the luminaire returns back to automatic profile dimming. Duration period is factory set at 15 minutes, and is field adjustable from 5 minutes up to 15 minutes. The area motion detector provides coverage equal to up to 6 times the sensor height above ground, 270 from the front-center of the sensor Front Coverage Distances are approximate. H = height above ground Height 9.5ft 25ft H 3H 6H Pole Details: IMRO requires that the pole include an additional hand hole 15 feet above the pole base, normally oriented 180 to the standard hand hole. For Philips Gardco poles, order the pole with the Motion Sensor Mounting (MSM) option which includes the hand hole and a special hand hole cover plate for the sensor with a 1/2" NPT receptacle centered on the hand hole cover plate into which the motion sensor mounts. Once the motion sensor is connected to the hand hole cover plate, then wiring connections are completed in the pole. The plate (complete with motion sensor attached and wired) is then mounted to the hand hole. If poles are supplied by others, the customer is responsible for providing suitable mounting accommodations for the motion sensor in the pole (see Gardco Poles specification sheets for more information). F1: Fusing Single (for 120, 277 or 347VAC) F2: Fusing Double (for 208, 240 or 480VAC) F3: Fusing Canadian Double Pull (for 208, 240 or 480VAC) FP1: Fusing Pole Single (pole mounted near handhole, for 120, 277 or 347VAC) FP2: Fusing Pole Double (pole mounted near handhole, for 208, 240 or 480VAC). FP3: Fusing Pole Canadian Double Pull (pole mounted near handhole, for 208, 240 or 480VAC) SP2: Surge Protection, 20kV/10kA, V SP2HV: Surge Protection, 20kV/10kA, V Wireless System: Controller radio/sensor module attached to luminaire arm and includes radio, photocell and motion sensor. Available with #2 lens (LLC2) for 8' to 15' mounting height" or #3 lens (LLC3) for 15-25' mounting heights or #4 lens (LLC4) for 25-4 mounting heights. Also available with remote pod accessory where pod is mounted separate from luminaire to pole or wall (see accessories and wireless system information page 5-7). SW SiteWise option is a fully integrated controller that connects to Philips SiteWise system in order to offer a complete area lighting management system. The communication signal is based on Philips patented central dimming technology. SiteWise delivers it deliver optimal energy savings using your site s existing cabling. No additional wiring required, installation and commissioning are simple. An intuitive, mobile app makes it easy for authorized users to set schedules to meet site specific lighting needs, local regulations, and energy codes. PFF 06/17 page 5 of 11

6 Luminaire accessories Ordered separately Pole mount IMRO sensors MS-A-120: 120V Input Area Motion Sensor MS-A-277: 120V Input Area Motion Sensor Wiring in Pole Cover Plate with 1/2" NPT Coupling (supplied with pole) Wireless system accessories (for wall or pole mount) LLCR2-(F): with #2 lens (specify finish at placeholder F) LLCR3-(F): with #3 lens (specify finish at placeholder F) LLCR4-(F): with #4 lens (specify finish at placeholder F) Wireless pole mounted & remote controller accessory requires dimming driver option (DD). The wireless system offers a remote controller module that allows connectivity to the wireless system gateway. The remote wireless controller can be mounted to wall or pole j-box supplied. May be specified by choosing one of three different lenses to accommodate a variety of mounting heights/ sensor detection ranges. Additional Hand Hole 15' Above Pole Base (oriented 180 to the standard hand hole) Motion Sensor: Attach Motion Sensor to Cover Plate coupling, Complete Wiring in Pole and Attach Cover Plate to Hand Hole Glare shield GS-PFF-92 For 92 LEDs (2 modules) GS-PFF-138 For 138 LEDs (3 modules) GS-PFF-184 For 184 LEDs (4 modules) GS-PFF-230 For 230 LEDs (5 modules) GS-PFF-276 For 276 LEDs (6 modules) For use with option IMRO. Motion Sensors are ordered separately, with one (1) motion sensor required per pole location for luminaires with IMRO option. See Luminaire Configuration Information on page 6-7 for more details. Area motion sensor color is Arctic White. Louvered glare shields are ordered as an accessory only and can be used with RM, A33 and AIRP optics. The number of glare shields is determined by total number of LED s per luminaire. Each set of glare shields includes a mounting kit that fastens to the front face of the LED light engine. Constructions consists of aluminum sheet metal louvers painted in a smooth black power coat finish and includes stainless steel hardware. One glare shield attaches to each 46 LED module. Luminaire accessories Steel Bullhorns (specify finish at placeholder F) Twin Bullhorn 180 Twin Bullhorn 180 Triple Triple Bullhorn Bullhorn Quad Bullhorn Mount Bullhorn " 30" 30" 15" 3 (762mm) (762mm) (762mm) (381mm) (914mm) (1524mm) (1524mm) (1524mm) (1524mm) 90" (2286mm) 05mm) GMD102M-PFF-(F) 1 Weight of bracket: 26 lbs Max weight load per Tenon 3 : 150 lbs Max EPA load per Tenon: 7.3 EPA of bracket: 1.6 GMD103M-PFF-(F) 1 GMD104M-PFF-(F) 1 Weight Triple of bracket: Bullhorn lbs Weight Quad of bracket: Bullhorn lbs Max weight load per Tenon 3 : 135 lbs Max EPA load per Tenon: 5.4 EPA of bracket: 2.1 Max weight load per Tenon 3 : 125 lbs Max EPA load per Tenon: 5.0 EPA of bracket: 3.5 Triple Triple Bullhorn Bullhorn Quad Bullhorn Quad Bullhorn Mount Bullhorn " 30" 15" 3 90 (762mm) (762mm) (381mm) 120 (914mm) Stanchion Mount Wall Right Angle Bracket Wall Right Angle Bracket Wall Vertical Tenon Bracket 90" " (1524mm) 120 (2286mm) 13" 14.5" (3658mm) 2.375" (330mm) (368mm) GMY103M-PFF-(F) 1 Triple Weight Bullhorn of bracket: lbs Max weight load per Tenon 3 : 150 lbs Max EPA load per Tenon: 6.3 GMX104M-PFF-(F) 1 Quad Weight Bullhorn of bracket: lbs Max weight load per Tenon 3 : 145 lbs Max EPA load per Tenon: 5.8 GMD115M-PFF-(F) 2 Weight of bracket: 134 lbs Max weight load per Tenon 3 : 128 lbs Max EPA load per Tenon: 5.1 EPA of bracket: 2.4 EPA of bracket: 3.0 EPA of bracket: 5.9 8" (203mm) 1. Require pole top tenon of 4" OD x depth x 0.22 thick. 2. Requires pole top tenon of 4" OD x depth x 0.3 thick. 3. Tenon loading is calculated for weights based on a 120 MPH (max) 90 constant wind with a 1.3 gust factor located 30 above grade. 120 When loading requirements Round Pole exceed Tenon these Reducer limits, contact Bracket your Philips Gardco Round representative. Pole Tenon Reducer Bracket Square Pole Tenon Reducer Bracket Squa PFF 06/17 page 6 of " 2.375" Wall Right Angle Bracket Wall Right Angle Bracket Wall Vertical Tenon Bracket 4" 13" (102mm) 14.5" 2.375" (330mm) (368mm) 2.375"

7 PFF PowerForm (1524mm) (1524mm) n Bullhorn 180 Triple 180 Bullhorn Twin Bullhorn 180 Triple Quad 180 Bullhorn Triple Quad Bullhorn Quad Bullhorn Mount Quad Bullhorn Mount Bullhorn 5-Mount 180 Bullhorn Mount Bullhorn 180 (1524mm) 90" " 30" 30" 30" 15" 30" 30" 15" (1524mm) 30" 15" 3 30" 15" 3 (2286mm) 3 3 m) (762mm) (762mm) (762mm) (381mm) (762mm) (762mm) (381mm) (762mm) (381mm) (914mm) (762mm) (381mm) (914mm) (914mm) (914mm) (36 m) 0" 1524mm) (1524mm) 90" (2286mm) Triple Bullhorn 120 Quad Bullhorn 90 (1524mm) 90" (2286mm) 90" (2286mm) 144" (3658mm) n 120 Triple Bullhorn 120 Triple Bullhorn Quad 120 Bullhorn Triple 90 Bullhorn Quad 120 Bullhorn 90 Quad Bullhorn 90 Quad Bullhorn Luminaire accessories Steel mounting (specify finish at placeholder F) Stanchion Mount Stanchion Mount Wall Right Angle Wall Bracket Right Angle Bracket Wall Right Angle Bracket Wall Vertical Tenon Bracket 90 13" 90 13" " 14.5" " (330mm) (330mm) (368mm) (368mm) 90" 144" (2286mm) (3658mm) 144" (3658mm) 144" (3658mm) (45 gle hion Bracket Mount Wall Right Stanchion Angle Wall Wall Bracket Mount Right Right Angle Angle Bracket Wall Wall Right Right Angle Angle Wall Wall Bracket Vertical Right Tenon Angle Bracket Wall Wall Vertical Right Tenon Angle Wall Bracket Vertical Tenon Bracket Wall Vertical Tenon Bracket 13" 14.5" 13" 14.5" 13" 14.5" 2.375" 8" 8" 14.5" 2.375" 2.375" 2.375" (203mm) (203mm) (330mm) (368mm) (330mm) (368mm) (330mm) (368mm) (368mm) SM-18-(F) WRAB-(F) WRABH-14-(F) WVT-2-(F) Standard Round length Pole Tenon Reducer Bracket Wall Round Offset Pole Tenon Reducer 14.5" Wall Bracket Offset Square Tenon: Pole Tenon 2-3/8" Reducer O.D. Bracket Square Po 2-3/8" O.D. aluminum tenon welded 2-7/8" stanchion. Tenon: 2-3/8" O.D. Tenon: 2-3/8" O.D. Depth: Stanchion mounting 2.375" 8" 8" 8" allows stable of vertical tenon Depth: 5-5/8" 2.375" 8" 05mm) Depth: 5-5/8" Weight: 2.375" 8 lbs 2 (203mm) (203mm) (203mm) (203mm) ( member in aggregate or positioning substrate. Weight: 8 lbs Weight: 12 lbs 4" (102mm) ducer d Pole Round Bracket Tenon Pole Reducer Round Tenon Bracket Reducer Pole Round Tenon Bracket Pole Reducer Tenon Round Bracket Reducer Pole Square Bracket Tenon Pole Reducer Round Tenon Bracket Pole Reducer Square Tenon Bracket Pole Reducer Tenon Square Bracket Reducer Pole Square Bracket Tenon Pole Reducer Square Tenon Bracket Reducer Pole Square Tenon Bracket Pole Reducer Tenon Square Bracket Reducer Pole Bracket Tenon Reducer Square Bracket Pole Tenon Red 2.375" 2.375" 2.375" 2.375" 2.375" 2.375" 2.375" 2.375" 2.375" 2.375" 2.375" 2.375" 2.375" 2.375" 4.25" 4" 4" (108mm) (133mm) 4.25" (102mm) (102mm) (108mm) (133mm) 25" mm) 4.25" (133mm) (108mm) (133mm) (133mm) 4.25" (133mm) 4.25" 4.25" 4.25" (108mm) (108mm) (108mm) (133mm) (108mm) (133mm) (133mm) (133mm) RPTR-4-(F) Mount: 4" round pole Tenon: 2-3/8" O.D. Weight: 11 lbs EPA: 0.40 RPTR-5-(F) Mount: 5" round pole Tenon: 2-3/8" O.D. Weight: 12 lbs EPA: 0.40 SPTR-4-(F) Mount: 4" square pole Tenon: 2-3/8" O.D. Weight: 12 lbs EPA: 0.46 SPTR-5-(F) Mount: 5" square pole Tenon: 2-3/8" O.D. Weight: 17 lbs EPA: 0.56 PFF 06/17 page 7 of 11

8 Wireless system Luminaire configuration information LLC3/LLC4 Luminaire Mounted Controller Controller pod attached to luminaire and Includes radio, photocell and motion sensor with #3 or #4 lens for 8-4 mounting heights. Recommended Sensor by Pole Height 15' LLC3 25' 3 LLC4 35' 4 LLCR2 Remote mount controller with #2 lens 8' 8' 8' 24' 24' 24' 1 1 ' 7' 3' 3' 7' 11' 24' 1 1 ' 7' 3' 3' 7' 11' 24' 1 1 ' 7' 3' 3' 7' 11' 24' LLC3/LLCR3 Luminaire or Remote mount controller with #3 lens 5' 5' 5' ' 15' 15' 18' 15' 9' 3' 0 3' 9' 15' 18' 18' 15' 9' 3' 0 3' 9' 15' 18' 18' 15' 9' 3' 0 3' 9' 15' 18' ft 44 ft 44 ft LLCR2/LLCR3/LLCR4 Pole Mounted Controller In this configuration, the wireless controller will be mounted to the pole at a fifteen foot mounting height. The number of luminaires on each pole, as well as the specific wattage chosen, will determine how many controllers will be required. When using the wireless remote accessory option (LLCR-F) in a pole mount application, specify pole option (CL=Coupling Internal Thread, 3/4" size). Confirm required orientation of luminaire and wireless controller. Indicate height above pole base and orientation to hand hole. Recommended min pole height is 18ft, with option (CL) 15ft above pole base. Other heights are possible when choosing the appropriate sensor lens type. See pole specification sheets for more information. Remote Mount Wireless Controller Used to extend the communication on site, to extend motion response and add other luminaires that are not pole mounted. Consult factory for more information. PFF 06/17 page 8 of 11 LLC4/LLCR4 Luminaire or Remote mount controller with #3 lens ' 3 27' 27' 3' 3' 6 3' 3' 6 3' 6 3' 27' 27' 3 27' 27' 3' 0 3' 27' ' 3' 0 3' 27' ' 3' 0 3' 27' 3 Controller Wireless Radio Watts max 5 (no load draw) 5 - Operating voltage VAC RMS 25' - Communicates 25' using the ZigBee protocol - Carries out dimming 25' commands from Gateway 10 - Reports ambient light readings to 1500 Ft-Cd Transmission Systems 25' Operating within the 27' band Mhz 25' 27' 25' 27' 4 - ROHS Compliant ' 25' ' 25' Photocell Motion Response5 25' 25' Ambient light photocell on - Detects motion through passive infrared every wireless radio that sensing technology with three different lens averages the light levels of up configurations. to 5 controllers for an accurate - Motion sensor coverage can be adjusted reading and optimal light from a narrow to a wide detection range, harvesting activity. which helps reduce false triggers to further - Reports ambient light readings increase energy savings. to 1500 Fc. - Sensing profiles can be updated to adapt to activity levels in the environment, such as occupancy level, wind, and mounting height.

9 SiteWise system SiteWise is a complete area lighting management system including a luminaire integrated controller, dimming signal transmitter cabinet, and locally accessible user interface. Installation and commissioning are simple. The cabinet communicates with the Philips luminaires using a patented central dimming technology. The control signal is embedded on the existing electrical line no new cabling is required. An intuitive, locally accessible interface makes it easy for authorized users to set schedules in order to meet site specific lighting needs, local regulations, and energy codes. SiteWise system diagram LAN / WiFi Mains power Gateway Authorized user Dimming signal transmitter and transformer Parking lot SiteWise system interface SiteWise has an intuitive user interface that makes it easy to plan, edit, and implement lighting schedules for your site. Authorized users can access the interface via a local app. To ensure that only authorized users can access your lighting, SiteWise offers two user types, each with different permissions. An advanced user, or administrator, can set and edit schedules using the ten pre-set scenes, assign those schedules to calendar days, and check system status. For everyday use, a basic user can manually override a schedule that is currently running but cannot create or edit schedules. SiteWise system specifications The SiteWise system includes both luminaires and controls. The controls used for SiteWise are circuit load dependent. Required for a complete installation are the following Philips SiteWise components: user interface, control kit, dimming signal transmitter cabinet, and dimming signal receiver located in the Philips luminaire (SW option). Optional luminaire-integrated or external motion sensors may also be specified as required. Within the electrical closet, the control kit and dimming signal transmitter cabinet are installed into the electrical system between the existing breaker panel and the site luminaires. New LED luminaires containing the dimming signal receiver are installed on the site. Once completed, use of the interface allows for scheduling and override capabilities. Wireless access point and tablet should be supplied by others. Complete information on the control system can be found on the SiteWise website at philips.com/sitewise PFF 06/17 page 9 of 11

10 Specifications Housing Main body castings made of a low copper die cast Aluminum alloy (A360) for a high resistance to corrosion, 0.100" (2.5mm) minimum thickness. Main body extrusions made of corrosion resistant low copper extruded anodized aluminum alloy (Anodized 6063-T5). Mounting Slipfitter: Optional slipfitter (SF), adjustable knuckle mount made of a low copper alloy (A360) for a high resistance to corrosion, available for applications requiring up tilt aiming and used for surface wall mount with accessory brackets. Also serves for mast arm mounting on a horizontal tenon. Fits over 2 3/8 OD tenon. Yoke: Optional adjustable Yoke Mount (YK), available for applications requiring direct surface mounting where external watertight cord exits off of lower main driver housing for connection by others. Driver/Electrical Door Removable die cast aluminum door made of a low copper alloy (A360) for a high resistance to corrosion. Provides access to electronic components/led drivers. Designed for robust IP66 rated seal using one-piece silicone rubber gasket surrounding the entire perimeter of the electronics compartment. Door secured with two captive screws outside of gasket perimeter. Includes a lanyard to prevent accidental dropping if access is required. Driver/electrical compartment is IP66 sealed/ rated in all aiming positions including upward aiming floodlighting applications and including when PCB option is installed. Light Engine Composed of 4 main components: Heat Sink / LED Module / Optical System / Driver. Electrical components are RoHS compliant. IP66 sealed light engines. LEDs tested by ISO accredited lab in accordance with IESNA LM-80 guidelines extrapolations in accordance with IESNA TM-21. Metal core board ensures greater heat transfer and longer lifespan. Heat Sink Anodized 6063-T5 Aluminum for a high resistance to corrosion, designed to ensure high efficacy and superior cooling by natural vertical convection. Air flow pattern always close to LEDs and driver optimizing their efficiency and life. Product does not use any cooling device with moving parts (only passive cooling). LED Module Composed of high performance white LEDs. Color temperature as per ANSI/NEMA bin Neutral White, 4000 Kelvin nominal (3985 +/- 275K or 3710K to 4260K), CRI 70 Min. Optical System Choice of four distributions including Spot (SP), Asymmetric 33 Flood (A33), Rectangular Medium Flood (RM) distributions and a specialty distribution designed for Airport Apron (AIRP) applications featuring a wide 87 horizontal and narrow 16 vertical beam. Composed of high performance UV stabilized optical grade polymer refractor lenses to achieve desired distribution optimized to get maximum spacing, target lumens and a superior lighting uniformity. System is rated IP66. Performance shall be tested per LM- 63, LM-79 and TM-15 (IESNA) certifying its photometric performance. Designed and tested to rating IK10 in accordance with European standard EN (equivalent of international standard IEC ). Driver High power factor of 90% min. Electronic driver, operating range 50/60 Hz. Auto adjusting universal voltage input from 120 to 277 VAC or 347 to 480 VAC rated for both application line to line or line to neutral, Class I, THD of 20% max. 0-10V dimming driver included, dimming leads pre-wired to controls except when DD option is selected. The current supplying the LEDs will be reduced by the driver if the driver experiences internal overheating as a protection to the LEDs and the electrical components. Output is protected from short circuits, voltage overload and current overload. Automatic recovery after correction. Standard built in driver surge protection of 2.5kV (min). Other Integrated Features Surge Protection: Each luminaire is provided as standard with surge protector (Philips designed SP1) tested in accordance with ANSI/IEEE C62.45 per ANSI/IEEE C Scenario I Category C High Exposure 10kV/5kA waveforms for Line Ground, Line Neutral and Neutral Ground. Enhanced surge protection (SP2 and SP2HV) is available as an option. SiteWise Network System SiteWise system includes a controller fully integrated in the luminaire that enables the luminaires to communicate with a dimming signal transmitter cabinet located on site using Philips patented central dimming technology. A locally accessible mobile app allows users to access the system and set functionalities such as ON/OFF, dimming levels and scheduling. SiteWise is available with motion response options in order to bring the light back to 100% when motion is detected. Additional functionalities are available such as communication with indoor lighting and connection to BMS systems. Wiring #2 - #14 AWG wires from the primary circuit, located inside the housing. Due to the inrush current that occurs with electronic drivers, recommend using a time delay or slow blow fuse to avoid unnecessary and unwanted fuse blowing that can occur with fast acting fuses. Hardware All exposed screws shall be stainless and/or corrosion resistant and captive. All seals and sealing devices are made and/or lined with EPDM and/or silicone and/or rubber. Finish Five standard textured colors: white, bronze, dark gray and medium gray. RAL and custom color matching available. Color in accordance with the AAMA 2604 standard. Application of polyester powder coat paint (2.5 mils/62.5 microns) with ± 1 mils/24 microns of tolerance. The thermosetting resins provides a discoloration resistant finish in accordance with the ASTM D2244 standard, as well as luster retention in keeping with the ASTM D523 standard and humidity proof in accordance with the ASTM D2247 standard. LED Products Manufacturing Standard The electronic components sensitive to electrostatic discharge (ESD) such as light emitting diodes (LEDs) are assembled in compliance with EC and ANSI/ ESD S20.20 standards so as to eliminate ESD events that could decrease the useful life of the product. PFF 06/17 page 10 of 11

11 Specifications (continued) LED Useful Life Luminaire Useful Life accounts for LED lumen maintenance. Refer to IES files for energy consumption and delivered lumens for each option. Based on ISTMT in situ thermal testing in accordance with UL1598 and UL8750, LED LM-80/TM-21, expected to reach 100,000 + hours with >L70 lumen 25 C. Vibration Resistance PowerForm meets the ANSI C136.31, American National Standard for Roadway Luminaire Vibration specifications tested for over 100,000 cycles in each plane by an independent lab as follows: Bridge/Overpass Applications 3G for 92L 2 modules, 138L 3 modules, 184L 4 modules and 230L 5 modules; Normal Applications 1.5G for 276L 4 modules. Certifications and Compliance culus Listed for Canada and USA. PowerForm LED luminaires with neutral white color temperature are DesignLights Consortium qualified. Entire luminaire is rated for operation in ambient temperature of -40 C (-40 F) up to +40 C (+104 F). Limited Warranty 5-year limited warranty. See philips.com/ warranties for details and restrictions. Visit our ecatalog or contact your local sales representative for more information. LED Performance Ambient Temperature ( C) Driver ma Predicted lumen depreciation data 1 Calculated L 70 Lumen Maintenance % hours 1,2 L 70 per TM-21 60,000 hours 25 C up to 1050 ma >100,000 >51,000 96% 1. Predicted performance derived from LED manufacturer s data and engineering design estimates, based on IESNA LM-80 methodology. Actual experience may vary due to field application conditions. 2. L 70 is the predicted time when LED performance depreciates to 70% of initial lumen output. 3. Calculated per IESNA TM Published L 70 hours limited to 6 times actual LED test hours Philips Lighting Holding B.V. All rights reserved. Philips reserves the right to make changes in specifications and/or to discontinue any product at any time without notice or obligation and will not be liable for any consequences resulting from the use of this publication. philips.com/luminaires PFF 06/17 page 11 of 11 Philips Lighting North America Corporation 200 Franklin Square Drive, Somerset, NJ Tel Philips Lighting Canada Ltd. 281 Hillmount Rd, Markham, ON, Canada L6C 2S3 Tel