USER Manual RCS Fanless Robust Computing System With 4 PCI/PCIe Slots, 3 rd Gen. Intel Core i7/ i5/ i3 Mobile Processor. 1.2.

Transcription

1 RCS-000 USER Manual Fanless Robust Computing System With PCI/PCIe Slots, rd Gen. Intel Core i/ i/ i Mobile Processor..0 Edition 00

2 Record of Revision Version Date Page Description Remark.0 0// All Offical Release.0 0/0/0 P Update Release. 0/0/ All Update Release. 0/0/ All Update Release ii

3 Declaimer This manual is released by Vecow Co., Ltd. for reference purpose only. All product offerings and specifications are subject to change without prior notice. It does not represent commitment of Vecow Co., Ltd. Vecow shall not be liable for direct, indirect, special, incidental, or consequential damages arising out of the use of the product or documentation, nor for any infringements upon the rights of third parties, which may result from such use. Declaration of Conformity FCC This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. CE The product (s) described in this manual complies with all applicable European Union (CE) directives if it has a CE marking. For computer systems to remain CE compliant, only CE-compliant parts may be used. Maintaining CE compliance also requires proper cable and cabling techniques. Copyright and Trademarks This document contains proprietary information protected by copyright. No part of this publication may be reproduced in any form or by any means, electric, photocopying, recording or otherwise, without prior written authorization by Vecow Co., Ltd. The rights of all the brand names, product names and trademarks belong to their respective owners. iii

4 Order Information Part Number Description Expansion Slots RCS- RCS-A Fan-less Robust Computing System, Slots Fan-less Robust Computing System, Slots PCI + PCIe x RCS-0 Fan-less Robust Computing System, Slots PCI PCI + PCIe x, PCIe x RCS-0 Fan-less Robust Computing System, Slots PCIe x + PCIe x RCS-0A Fan-less Robust Computing System, Slots PCIe x RCS- Fan-less Robust Computing System, Slots PCI + PCIe x iv

5 Optional Accessories Part Number i-0qe Description Ivy Bridge rd Gen Intel Mobile Quad-Core i Processor i-0me Ivy Bridge rd Gen Intel Mobile Core i Processor i-0me M0S-WM Certified DDR GB RAM Certified DDR GB RAM PWA-0W-WT PWA-0W SCSI-0P-00 TMB-SCSI-0P Ivy Bridge rd Gen Intel Mobile Core i Processor Vecow DDR GB 0MHz RAM, Micron Chip, Wide Temperature -0 C ~ + C Certified DDR GB RAM Certified DDR GB RAM 0W, V, VAC to VAC Power Adaptor with -pin Terminal Block, Wide Temperature -0 C to +0 C 0W, V, 90VAC to VAC Power Adapter with -pin Terminal Block 0-pin SCSI Cable, M Terminal Board with One 0-pin SCSI Connector and DIN-Rail Mounting v

6 Table of Contents CHAPTER GENERAL INTRODUCTION. Overview. Product Specification.. Specifications of Vecow RCS-.. Specifications of Vecow RCS-A.. Specifications of Vecow RCS-0.. Specifications of Vecow RCS-0.. Specifications of Vecow RCS-0A 0.. Specifications of Vecow RCS-. Supported CPU List. Mechanical Dimension CHAPTER GETTING TO KNOW YOUR RCS-000. Packing List. Front Panel I/O Functions.. Power Button.. Rest Tact Switch 9.. Power, HDD LED Indicator 9.. Dual Isolated DI/ DO 0.. Serial Port, COM, COM, COM.. USB.0 Port.. Serial Port, COM.. USB.0 Port..9 0/00/000 Mbps Ethernet Port..0 DisplayPort.. DVI-D Connector/ HDMI Connector.. VGA Connector 9.. Audio Connector 0.. DC-in Power Terminal Block 0.. Remote Power On/ Off Switch. Main Board Expansion Connectors.. J Miscellaneous Pin Header.. CFast Card.. CN9, CN, J LVDS.. CN, CN SATA-III Connector 0 vi

7 .. CN, CN9 SATA-II Connector.. CN, CN0 SATA Power Connector.. SATA DOM Power Connector.. J Internal USB Port..9 CN Mini PCIe Connector, msata Connector..0 CN Mini PCIe Connector, CN SIM Card.. CN GPIO 0.. Fan.. Battery.. CN PCIe x Slot.. CN PCIe x Slot.. Dual SO-DIMM.. CN Multiple I / O 9. Main Board Jumper Setting 0.. JP AT/ ATX Power Mode Jumper Setting.. JP LVDS Backlight Power Selection.. JP PCIe x Configuration.. JP(A) CMOS Clear Jumper Setting.. JP(B) CMOS Clear Jumper Setting CHAPTER HARDWARE INSTALLATION CHAPTER BIOS AND DRIVER SETTING. BIOS Settings. Main Menu. Advanced Function. Chipset Function. Boot Function 9 APPENDIX A : ISOLATED DIO GUIDE 90 APPENDIX B : GPIO & WDT FUNCTION 9 APPENDIX C : RAID INSTALLATION GUIDE 9 vii

8 GENERAL INTRODUCTION. Overview Designed to operate within various applications, RCS-000 series is an expendable fanless embedded computer with configurable PCI and PCI express sockets. High performance fanless embedded computer, RCS-000 series comes with the expansion capabilities to provide specific applications, and is based on cutting-edge rd generation Intel Core i, i, or i processors. Working expended temperature from - to 0 Celsius degrees, fan-less and cable-less structure of RCS-900 enables durability and reliability to robust computing systems for applications required standard PCI and PCI express cards. Enabling speedy data access with RAID 0,, and 0 and hard drive failure protection with RAID,, and 0, RCS-000 series is equipped with two extend SATA III ( Gbp/s) SSD HDD trays for better responsiveness and storage capability. Rapid storage technology combines with RAID and two SATA III practical interfaces enhancing performance and data computing of multi-core platforms. RCS-000 series is equipped with rich I/O, included GbE LAN with independent LAN controllers, isolated DIO: DI, DO, COM, USB.0, USB.0, CFast, mini-pcie ( with SIM card socket for WiFi, G/GPRS), RS- and RS-//, in/out GPIO for multi-camera industrial inspection, machine vision, video analytics, AOI, industrial intelligent automation, surveillance, and environment monitoring applications. GENERAL INTRODUCTION

9 . Product Specification.. Specifications of Vecow RCS- System Processor Chipset BIOS SIO Memory I/O rd Generation Intel Core i/ i/ i Ivy Bridge Processor (M Cache, up to.0 GHz) Intel QM AMI ITF DDR 0/ / 00 MHz, DDRL 0/ MHz, Max. GB 0-pin SO-DIMM sockets Serial COM RS-, COM RS-/ / USB External USB ( USB.0, USB.0)+ Internal USB.0 Isolated DIO DI, DO LED Power, SDD and WDT LEDs GPIO GPIO Expansion PCI Express PCI Mini PCIe Graphics PCIe x PCI Mini PCIe Socket (PCIe + USB + SIM Card Socket) Mini PCIe Socket (PCIe + USB), compatible with msata Chipset Intel GMA HD 000 Display Memory Shared Memory, up to.gb Interface DB- VGA: 90 x 00 Max. DVI-D: 90 x 00 Max. DisplayPort : 0 x 00 Max. DisplayPort : 90 x 00 Max. LVDS: Dual Channel -bit, 90 x 00 Max. Storage SATA msata Storage Expansion Audio Audio Codec Audio Interface SATA III Gbps SATA II Gbps CFast Slot, External Hot-Swap, Push-in/ Push-out Ejector Realtek ALC9,. Channel HD Audio Line-out, Mic-in, Front Audio Header Vecow RCS-000 Series Robust Computing System User Manual GENERAL INTRODUCTION

10 Ethernet LAN LAN Power Power Input Power Input Voltage Power Adapter Protection Others Trusted Platform Module (TPM) Watchdog Timer HW Monitor Mechanical Intel 9LM Gigabit LAN, Wake on LAN, PXE Support, iamt.0 Intel L Gigabit LAN, Wake on LAN, PXE Support -pin terminal block for DC-in: V+, V-, Frame Ground ATX: -pin Remote Power On/Off Switch DC-in V to V AC to DC +V/ A, 0W Max. (Optional) OnBoard LT for Power Input High Voltage Surge Protection Infineon SLB9, LPC Interface (Optional) Reset: to sec/ min Per Step Temperature, voltages auto throttling control when CPU overheats Chasis Construction Aluminum Housing Size (W x D x H) mm x mm x 0mm (. x 9.9 x. ) Weight Mounting Environmental Operating Temperature Storage Temperature Humidity kg (. lb) Relative Humidity 9% at 0 C Vibration Shock EMC Wall-mount by Mounting Bracket - C to 0 C (- F to F) -0 C to C (-0 F to F) 0% to 9% Humidity, Non-condensing Random: to 00 Hz according to IEC-- Sinusoidal: to 00 Hz according to IEC-- Operating, 0 Grms, Half-sine ms Duration (w/ SSD, According to IEC00--) CE, FCC GENERAL INTRODUCTION

11 .. Specifications of Vecow RCS-A System Processor Chipset BIOS SIO Memory I/O rd Generation Intel Core i/ i/ i Ivy Bridge Processor (M Cache, up to.0 GHz) Intel QM AMI ITF DDR 0/ / 00 MHz, DDRL 0/ MHz, Max. GB 0-pin SO-DIMM sockets Serial COM RS-, COM RS-/ / USB External USB ( USB.0, USB.0)+ Internal USB.0 Isolated DIO DI, DO LED Power, SDD and WDT LEDs GPIO GPIO Expansion PCI Express PCI Mini PCIe Graphics PCIe x, PCIe x PCI Mini PCIe Socket (PCIe + USB + SIM Card Socket) Mini PCIe Socket (PCIe + USB), compatible with msata Chipset Intel GMA HD 000 Display Memory Shared Memory, up to.gb Interface DB- VGA: 90 x 00 Max. DVI-D: 90 x 00 Max. DisplayPort : 0 x 00 Max. DisplayPort : 90 x 00 Max. LVDS: Dual Channel -bit, 90 x 00 Max. Storage SATA msata Storage Expansion Audio Audio Codec Audio Interface SATA III Gbps SATA II Gbps CFast Slot, External Hot-Swap, Push-in/ Push-out Ejector Realtek ALC9,. Channel HD Audio Line-out, Mic-in, Front Audio Header Vecow RCS-000 Series Robust Computing System User Manual GENERAL INTRODUCTION

12 Ethernet LAN LAN Power Power Input Power Input Voltage Power Adapter Protection Others Trusted Platform Module (TPM) Watchdog Timer HW Monitor Mechanical Intel 9LM Gigabit LAN, Wake on LAN, PXE Support, iamt.0 Intel L Gigabit LAN, Wake on LAN, PXE Support -pin terminal block for DC-in: V+, V-, Frame Ground ATX: -pin Remote Power On/Off Switch DC-in V to V AC to DC +V/ A, 0W Max. (Optional) OnBoard LT for Power Input High Voltage Surge Protection Infineon SLB9, LPC Interface (Optional) Reset: to sec/ min Per Step Temperature, voltages auto throttling control when CPU overheats Chasis Construction Aluminum Housing Size (W x D x H) mm x mm x 0mm (. x 9.9 x. ) Weight Mounting Environmental Operating Temperature Storage Temperature Humidity kg (. lb) Relative Humidity 9% at 0 C Vibration Shock EMC Wall-mount by Mounting Bracket - C to 0 C (- F to F) -0 C to C (-0 F to F) 0% to 9% Humidity, Non-condensing Random: to 00 Hz according to IEC-- Sinusoidal: to 00 Hz according to IEC-- Operating, 0 Grms, Half-sine ms Duration (w/ SSD, According to IEC00--) CE, FCC GENERAL INTRODUCTION

13 .. Specifications of Vecow RCS-0 System Processor Chipset BIOS SIO Memory I/O rd Generation Intel Core i/ i/ i Ivy Bridge Processor (M Cache, up to.0 GHz) Intel QM AMI ITF DDR 0/ / 00 MHz, DDRL 0/ MHz, Max. GB 0-pin SO-DIMM sockets Serial COM RS-, COM RS-/ / USB External USB ( USB.0, USB.0)+ Internal USB.0 Isolated DIO DI, DO LED Power, SDD and WDT LEDs GPIO GPIO Expansion PCI Mini PCIe Graphics PCI Mini PCIe Socket (PCIe + USB + SIM Card Socket) Mini PCIe Socket (PCIe + USB), compatible with msata Chipset Intel GMA HD 000 Display Memory Shared Memory, up to.gb Interface DB- VGA: 90 x 00 Max. DVI-D: 90 x 00 Max. DisplayPort : 0 x 00 Max. DisplayPort : 90 x 00 Max. LVDS: Dual Channel -bit, 90 x 00 Max. Storage SATA msata Storage Expansion Audio Audio Codec Audio Interface SATA III Gbps SATA II Gbps CFast Slot, External Hot-Swap, Push-in/ Push-out Ejector Realtek ALC9,. Channel HD Audio Line-out, Mic-in, Front Audio Header Vecow RCS-000 Series Robust Computing System User Manual GENERAL INTRODUCTION

14 Ethernet LAN LAN Power Power Input Power Input Voltage Power Adapter Protection Others Trusted Platform Module (TPM) Watchdog Timer HW Monitor Mechanical Intel 9LM Gigabit LAN, Wake on LAN, PXE Support, iamt.0 Intel L Gigabit LAN, Wake on LAN, PXE Support -pin terminal block for DC-in: V+, V-, Frame Ground ATX: -pin Remote Power On/Off Switch DC-in V to V AC to DC +V/ A, 0W Max. (Optional) OnBoard LT for Power Input High Voltage Surge Protection Infineon SLB9, LPC Interface (Optional) Reset: to sec/ min Per Step Temperature, voltages auto throttling control when CPU overheats Chasis Construction Aluminum Housing Size (W x D x H) mm x mm x 0mm (. x 9.9 x. ) Weight Mounting Environmental Operating Temperature Storage Temperature Humidity kg (. lb) Relative Humidity 9% at 0 C Vibration Shock EMC Wall-mount by Mounting Bracket - C to 0 C (- F to F) -0 C to C (-0 F to F) 0% to 9% Humidity, Non-condensing Random: to 00 Hz according to IEC-- Sinusoidal: to 00 Hz according to IEC-- Operating, 0 Grms, Half-sine ms Duration (w/ SSD, According to IEC00--) CE, FCC GENERAL INTRODUCTION

15 .. Specifications of Vecow RCS-0 System Processor Chipset BIOS SIO Memory I/O rd Generation Intel Core i/ i/ i Ivy Bridge Processor (M Cache, up to.0 GHz) Intel QM AMI ITF DDR 0/ / 00 MHz, DDRL 0/ MHz, Max. GB 0-pin SO-DIMM sockets Serial COM RS-, COM RS-/ / USB External USB ( USB.0, USB.0)+ Internal USB.0 Isolated DIO DI, DO LED Power, SDD and WDT LEDs GPIO GPIO Expansion PCI Express Mini PCIe Graphics PCIe x, PCIe x Mini PCIe Socket (PCIe + USB + SIM Card Socket) Mini PCIe Socket (PCIe + USB), compatible with msata Chipset Intel GMA HD 000 Display Memory Shared Memory, up to.gb Interface DB- VGA: 90 x 00 Max. DVI-D: 90 x 00 Max. DisplayPort : 0 x 00 Max. DisplayPort : 90 x 00 Max. LVDS: Dual Channel -bit, 90 x 00 Max. Storage SATA msata Storage Expansion Audio Audio Codec Audio Interface SATA III Gbps SATA II Gbps CFast Slot, External Hot-Swap, Push-in/ Push-out Ejector Realtek ALC9,. Channel HD Audio Line-out, Mic-in, Front Audio Header Vecow RCS-000 Series Robust Computing System User Manual GENERAL INTRODUCTION

16 Ethernet LAN LAN Power Power Input Power Input Voltage Power Adapter Protection Others Trusted Platform Module (TPM) Watchdog Timer HW Monitor Mechanical Intel 9LM Gigabit LAN, Wake on LAN, PXE Support, iamt.0 Intel L Gigabit LAN, Wake on LAN, PXE Support -pin terminal block for DC-in: V+, V-, Frame Ground ATX: -pin Remote Power On/Off Switch DC-in V to V AC to DC +V/ A, 0W Max. (Optional) OnBoard LT for Power Input High Voltage Surge Protection Infineon SLB9, LPC Interface (Optional) Reset: to sec/ min Per Step Temperature, voltages auto throttling control when CPU overheats Chasis Construction Aluminum Housing Size (W x D x H) mm x mm x 0mm (. x 9.9 x. ) Weight Mounting Environmental Operating Temperature Storage Temperature Humidity kg (. lb) Relative Humidity 9% at 0 C Vibration Shock EMC Wall-mount by Mounting Bracket - C to 0 C (- F to F) -0 C to C (-0 F to F) 0% to 9% Humidity, Non-condensing Random: to 00 Hz according to IEC-- Sinusoidal: to 00 Hz according to IEC-- Operating, 0 Grms, Half-sine ms Duration (w/ SSD, According to IEC00--) CE, FCC GENERAL INTRODUCTION 9

17 .. Specifications of Vecow RCS-0A System Processor Chipset BIOS SIO Memory I/O rd Generation Intel Core i/ i/ i Ivy Bridge Processor (M Cache, up to.0 GHz) Intel QM AMI ITF DDR 0/ / 00 MHz, DDRL 0/ MHz, Max. GB 0-pin SO-DIMM sockets Serial COM RS-, COM RS-/ / USB External USB ( USB.0, USB.0)+ Internal USB.0 Isolated DIO DI, DO LED Power, SDD and WDT LEDs GPIO GPIO Expansion PCI Express Mini PCIe Graphics PCIe x Mini PCIe Socket (PCIe + USB + SIM Card Socket) Mini PCIe Socket (PCIe + USB), compatible with msata Chipset Intel GMA HD 000 Display Memory Shared Memory, up to.gb Interface DB- VGA: 90 x 00 Max. DVI-D: 90 x 00 Max. DisplayPort : 0 x 00 Max. DisplayPort : 90 x 00 Max. LVDS: Dual Channel -bit, 90 x 00 Max. Storage SATA msata Storage Expansion Audio Audio Codec Audio Interface SATA III Gbps SATA II Gbps CFast Slot, External Hot-Swap, Push-in/ Push-out Ejector Realtek ALC9,. Channel HD Audio Line-out, Mic-in, Front Audio Header Vecow RCS-000 Series Robust Computing System User Manual GENERAL INTRODUCTION 0

18 Ethernet LAN LAN Power Power Input Power Input Voltage Power Adapter Protection Others Trusted Platform Module (TPM) Watchdog Timer HW Monitor Mechanical Intel 9LM Gigabit LAN, Wake on LAN, PXE Support, iamt.0 Intel L Gigabit LAN, Wake on LAN, PXE Support -pin terminal block for DC-in: V+, V-, Frame Ground ATX: -pin Remote Power On/Off Switch DC-in V to V AC to DC +V/ A, 0W Max. (Optional) OnBoard LT for Power Input High Voltage Surge Protection Infineon SLB9, LPC Interface (Optional) Reset: to sec/ min Per Step Temperature, voltages auto throttling control when CPU overheats Chasis Construction Aluminum Housing Size (W x D x H) mm x mm x 0mm (. x 9.9 x. ) Weight Mounting Environmental Operating Temperature Storage Temperature Humidity kg (. lb) Relative Humidity 9% at 0 C Vibration Shock EMC Wall-mount by Mounting Bracket - C to 0 C (- F to F) -0 C to C (-0 F to F) 0% to 9% Humidity, Non-condensing Random: to 00 Hz according to IEC-- Sinusoidal: to 00 Hz according to IEC-- Operating, 0 Grms, Half-sine ms Duration (w/ SSD, According to IEC00--) CE, FCC GENERAL INTRODUCTION

19 .. Specifications of Vecow RCS- System Processor Chipset BIOS SIO Memory I/O rd Generation Intel Core i/ i/ i Ivy Bridge Processor (M Cache, up to.0 GHz) Intel QM AMI ITF DDR 0/ / 00 MHz, DDRL 0/ MHz, Max. GB 0-pin SO-DIMM sockets Serial COM RS-, COM RS-/ / USB External USB ( USB.0, USB.0)+ Internal USB.0 Isolated DIO DI, DO LED Power, SDD and WDT LEDs GPIO GPIO Expansion PCI Express PCI Mini PCIe Graphics PCIe x PCI Mini PCIe Socket (PCIe + USB + SIM Card Socket) Mini PCIe Socket (PCIe + USB), compatible with msata Chipset Intel GMA HD 000 Display Memory Shared Memory, up to.gb Interface DB- VGA: 90 x 00 Max. DVI-D: 90 x 00 Max. DisplayPort : 0 x 00 Max. DisplayPort : 90 x 00 Max. LVDS: Dual Channel -bit, 90 x 00 Max. Storage SATA msata Storage Expansion Audio Audio Codec Audio Interface SATA III Gbps SATA II Gbps CFast Slot, External Hot-Swap, Push-in/ Push-out Ejector Realtek ALC9,. Channel HD Audio Line-out, Mic-in, Front Audio Header Vecow RCS-000 Series Robust Computing System User Manual GENERAL INTRODUCTION

20 Ethernet LAN LAN Power Power Input Power Input Voltage Power Adapter Protection Others Trusted Platform Module (TPM) Watchdog Timer HW Monitor Mechanical Intel 9LM Gigabit LAN, Wake on LAN, PXE Support, iamt.0 Intel L Gigabit LAN, Wake on LAN, PXE Support -pin terminal block for DC-in: V+, V-, Frame Ground ATX: -pin Remote Power On/Off Switch DC-in V to V AC to DC +V/ A, 0W Max. (Optional) OnBoard LT for Power Input High Voltage Surge Protection Infineon SLB9, LPC Interface (Optional) Reset: to sec/ min Per Step Temperature, voltages auto throttling control when CPU overheats Chasis Construction Aluminum Housing Size (W x D x H) mm x mm x 0mm (. x 9.9 x. ) Weight Mounting Environmental Operating Temperature Storage Temperature Humidity kg (. lb) Relative Humidity 9% at 0 C Vibration Shock EMC Wall-mount by Mounting Bracket - C to 0 C (- F to F) -0 C to C (-0 F to F) 0% to 9% Humidity, Non-condensing Random: to 00 Hz according to IEC-- Sinusoidal: to 00 Hz according to IEC-- Operating, 0 Grms, Half-sine ms Duration (w/ SSD, According to IEC00--) CE, FCC GENERAL INTRODUCTION

21 . Supported CPU List Vecow RCS-000 accepts rd generation Intel i i i processors via a rpga9b CPU socket. The following processors have been tested by Vecow Co., Ltd. for the compatibility with Vecow RCS-000. Instead of i-0qe, i- 0ME and i-0me, You may also select other processor according to your consideration of application and performance. Series Max. TDP iamt Embedded i 0QM W 0QM W 0QM W 0QM W QM 0QM QM W W W 0QE W O 0M W 0M W i 0ME W O 0M W 0M W 0M W 0M W 0M 0M W W i 0M* W 0ME W O 0M* W 0M* W The processors with "O" are listed in Intel Embedded Roadmap and with a -year life cycle support (from 0 to 0). The processors with "*" the maximum operation temperature is O C. Vecow RCS-000 Series Robust Computing System User Manual GETTING TO KNOW YOUR RCS-000

22 . Mechanical Dimension Figure. RCS- & RCS-A & RCS-0 SCREW:KHS-#- (. ) (9.9 ) SCREW: KHS-#- 0 (. ) SCREW:KHS-#- (. ) GENERAL INTRODUCTION

23 Figure. RCS-0 & RCS-0A & RCS- SCREW:KHS-#- (.") (9.9 ) SCREW: KHS-#- 0 (. ) SCREW:KHS-#- (. ) Vecow RCS-000 Series Robust Computing System User Manual GENERAL INTRODUCTION

24 GETTING TO KNOW YOUR RCS-000. Packing List Item Description Qty RCS-000 Fanless Robust Computing System (According to the configuration you order, the RCS-000 may contain HDD and DDR SO-DIMM. Please verify these items if necessary.) Accessory box, which contains Vecow Drivers & Utilities DVD Wall-mounting bracket M screws for wall-mounting bracket -pin pluggable terminal block. Front Panel I/O Functions COM COM Isolated DIO Isolated DIO Reset DVI-D LAN LAN V+ V- COM On Off VGA COM All Input / Output connectors are located on front panel of RCS-000 series. Most connectors like audio, USB, DVI-D, VGA are all designed on front panel. GETTING TO KNOW YOUR RCS-000

25 .. Power Button COM COM Isolated DIO Isolated DIO Reset DVI-D LAN LAN V+ V- COM On Off VGA COM The power button is a non-latched switch with dual color LED (Blue/Orange) for indication S0, S and S status. Power button dual-color LED indicator: Status LED Display System Situation S0 Solid Blue System working S, S Solid Orange Suspend to RAM, System off with standby power To turn on the RCS-000 series, press the power button and the blue LED is lighted up. To turn off the RCS-000 series, you can either issue a shutdown command in OS, or just simply press the power button. In case of system halts, you can press and hold the power button for seconds to compulsorily shut down the system. Please note that a seconds interval is kept by the system between two on/ off operations (i.e. once turning off the system, you shall wait for seconds to initiate another power-on operation). Vecow RCS-000 Series Robust Computing System User Manual GETTING TO KNOW YOUR RCS-000

26 .. Rest Tact Switch COM COM Isolated DIO Isolated DIO Reset DVI-D LAN LAN V+ V- COM On Off VGA COM It is a hardware reset switch. Use this switch to reset the system without turning off the power. Momentarily pressing the switch will activate a reset... Power, HDD LED Indicator COM COM Isolated DIO Isolated DIO Reset DVI-D LAN LAN V+ V- COM On Off VGA COM GETTING TO KNOW YOUR RCS-000 9

27 Yellow-HDD LED: A hard disk/ CFast LED. If the LED is on, it indicates that the system s storage is functional. If it is off, it indicates that the system s storage is not functional. If it is flashing, it indicates data access activities. Green-Power LED: If the LED is solid green, it indicates that the system is powered on... Dual Isolated DI/ DO COM COM Isolated DIO Isolated DIO Reset DVI-D LAN LAN V+ V- COM On Off VGA COM The RCS-000 series offers dual -bit DIO ( -DI / -DO) connector. Each bit of DI and DO equipped with a photo-coupler for isolated protection. A power buffer device TPD00F integrated in -DO circuit for motors, solenoids, and lamp drivers applications. Pin No. Definition Mapping to SIO GPIO Function INPUT0 SIO_GPI0 INPUT SIO_GPI INPUT SIO_GPI INPUT SIO_GPI INPUT SIO_GPI INPUT SIO_GPI INPUT SIO_GPI INPUT SIO_GPI 9 DI_COM 0 GND Vecow RCS-000 Series Robust Computing System User Manual GETTING TO KNOW YOUR RCS-000 0

28 Pin No. Definition Mapping to SIO GPIO Function OUTPUT0 SIO_GPO0 OUTPUT SIO_GPO OUTPUT SIO_GPO OUTPUT SIO_GPO OUTPUT SIO_GPO OUTPUT SIO_GPO OUTPUT SIO_GPO OUTPUT SIO_GPO 9 N.C. 0 External VDC Input DIO Pin Assignment Pin No. Definition Mapping to SIO GPIO Function INPUT0 SIO_GPI0 INPUT SIO_GPI INPUT SIO_GPI INPUT SIO_GPI INPUT SIO_GPI INPUT SIO_GPI INPUT SIO_GPI INPUT SIO_GPI 9 DI_COM 0 GND OUTPUT0 SIO_GPO0 OUTPUT SIO_GPO OUTPUT SIO_GPO OUTPUT SIO_GPO OUTPUT SIO_GPO OUTPUT SIO_GPO OUTPUT SIO_GPO OUTPUT SIO_GPO 9 N.C. 0 External VDC Input GETTING TO KNOW YOUR RCS-000

29 GPI SINK Mode Isolated GPI input circuit in SINK mode (NPN) is illustrated as follows. GPI SOURCE Mode Digital GPI input signal circuit in SOURCE mode (PNP) is illustrated as follow: GPO SINK Mode Digital GPO output circuit in SINK mode (NPN) is illustrated below. Vecow RCS-000 Series Robust Computing System User Manual GETTING TO KNOW YOUR RCS-000

30 .. Serial Port, COM, COM, COM COM COM Isolated DIO Isolated DIO Reset DVI-D LAN LAN V+ V- COM On Off VGA COM COM, COM and COM are RS- only and provide up to 00 bps baud rates. The pin assignments are shown in the following table: Serial Port Pin No. RS- COM,, DCD RXD TXD DTR GND DSR RTS CTS 9 RI GETTING TO KNOW YOUR RCS-000

31 .. USB.0 Port COM COM Isolated DIO Isolated DIO Reset DVI-D LAN LAN V+ V- COM On Off VGA COM The RCS-000 series comes with USB.0 hosts on the front panel. The USB interface supports Plug and Play, which enables you to connect or disconnect a device whenever you want, without turning off the system. The hosts can be used for an external flash disk or hard drive for storing large amounts of data. You can also use these USB hosts to connect to a keyboard or a mouse. The following diagram shows the pinouts for USB and USB port. Pin No. USB +V USB- USB+ GND USB +V USB- USB+ GND Vecow RCS-000 Series Robust Computing System User Manual GETTING TO KNOW YOUR RCS-000

32 .. Serial Port, COM COM COM Isolated DIO Isolated DIO Reset DVI-D LAN LAN V+ V- COM On Off VGA COM Serial port can be configured for RS-, RS-, or RS- with auto flow control communication. Serial Port default setting is RS-, if you want to use RS- or RS-, you can find the setting in BIOS. BIOS Setting COM Function RS- RS- (-wire) RS- (9-wire) RS- RS- w/z auto-flow control The pin assignments are shown in the following table: Serial Port Pin No. RS- RS- (-Wire) RS- (9-Wire) RS- (-Wire) DCD TXD- TXD- DATA- RXD TXD+ TXD+ DATA+ TXD RXD+ RXD DTR RXD- RXD GND GND GND GND DSR RTS RTS RTS CTS CTS RI CTS GETTING TO KNOW YOUR RCS-000

33 .. USB.0 Port COM COM Isolated DIO Isolated DIO Reset DVI-D LAN LAN V+ V- COM On Off VGA COM The RCS-000 comes with USB.0 hosts on the front panel. These USB.0 ports allow data transfers up to Gb/s. The controller supports SuperSpeed (SS), high-speed (HS), full-speed (FS) and los-speed (LS) traffic on the bus...9 0/00/000 Mbps Ethernet Port COM COM Isolated DIO Isolated DIO Reset DVI-D LAN LAN V+ V- COM On Off VGA COM Vecow RCS-000 Series Robust Computing System User Manual GETTING TO KNOW YOUR RCS-000

34 The 0/00/000 Mbps Ethernet LAN ports and use -pin RJ- connector. LAN is equipped with Intel 9LM for AMT function. LAN is equipped with Intel L. Using suitable RJ- cable, you can connect RCS-000 series system to a computer, or to any other piece of equipment that has an Ethernet connection, for example, a hub or a switch. Moreover, both of them have Wake-on-LAN and Pre-boot Execution Environment capabilities. The following diagram shows the pinouts for LAN and LAN port. Pin No. 0 / 00 Mbps 000 Mbps E_TX+ MDI0_P E_TX- MDI0_N E_RX+ MDI_P ---- MDI_P MDI_N E_RX- MDI_N MDI_P MDI_N The Ethernet ports use standard RJ- jack connectors with LED indicators on the front side to show Active/Link status and Speed status. The LED indicators on the right bottom corners glow a solid green color when the cable is properly connected to a 00 Mbps Ethernet network. The LED indicator on the left bottom corner will flash on and off when Ethernet packets are being transmitted or received. The LED indicators on the right bottom corners glow a solid orange color when the cable is properly connected to a 000 Mbps Ethernet network. The LED indicator on the left bottom corner will flash on and off when Ethernet packets are being transmitted or received. Location 0 Mbps 00 Mbps 000 Mbps Right Bottom LED off Solid Green Solid Orange Left Bottom LED Flash Yellow Flash Yellow Flash Yellow GETTING TO KNOW YOUR RCS-000

35 ..0 DisplayPort COM COM Isolated DIO Isolated DIO Reset DVI-D LAN LAN V+ V- COM On Off VGA COM Each digital port is capable of driving resolutions up to 0x00 at 0 Hz through Display Port... DVI-D Connector/ HDMI Connector COM COM Isolated DIO Isolated DIO Reset DVI-D LAN LAN V+ V- COM On Off VGA COM The DVI-D connector on the front panel supports both DVI and HDMI operation mode. This connector can either output DVI signals or HDMI signal. Vecow RCS-000 Series Robust Computing System User Manual GETTING TO KNOW YOUR RCS-000

36 The DVI output mode supports up to 90x00 resolutions and HDMI output mode supports up to 90x00 resolutions. The DVI or HDMI mode is automatically selected according to the display device connected. You shall need a DVI-D to HDMI cable when connecting to a HDMI display device... VGA Connector COM COM Isolated DIO Isolated DIO Reset DVI-D LAN LAN V+ V- COM On Off VGA COM The RCS-000 series comes with a DB female connector on the front panel to connect a VGA monitor. To ensure that the monitor image remains clear, be sure to tighten the monitor cable after connecting it to the RCS-000 series. The VGA output mode supports up to 90x00 resolutions. The pin assignments of the VGA connector are shown below. 0 Pin No. Description Red Color Signal Green Color Signal Blue Color Signal NC Ground VGA Detect Ground Ground Pin No. Description 9 VCC 0 Ground NC DDC-DATA H-Sync. V-Sync. DDC-CLK GETTING TO KNOW YOUR RCS-000 9

37 .. Audio Connector COM COM Isolated DIO Isolated DIO Reset DVI-D LAN LAN V+ V- COM On Off VGA COM The RCS-000 series offers stereo audio connector of MIC, Line_Out. The audio chip controller is by ALC9 which is compliant with the Intel Azalia standard. To utilize the audio function in Windows, you need to install corresponding drivers for both Intel QM chipset and Realtek ALC9 codec... DC-in Power Terminal Block COM COM Isolated DIO Isolated DIO Reset DVI-D LAN LAN V+ V- COM On Off VGA COM Vecow RCS-000 Series Robust Computing System User Manual GETTING TO KNOW YOUR RCS-000 0

38 The RCS-000 series offers to VDC power input with the terminal block. If the power is supplied properly, the Power LED will light up a solid green. 0V power surge protection is design in in LTC.Grounding and write routing help limit the effects of noise due to EMI. Run the ground connection from the ground screw to the grounding surface prior to connecting the power. See the figure shown below for the location of the earth ground on the terminal block power connector. Connect the earth ground wire to an appropriate grounded metal surface. DC - V V+ V-.. Remote Power On/ Off Switch COM COM Isolated DIO Isolated DIO Reset DVI-D LAN LAN V+ V- COM On Off VGA COM It is a -pin power-on or power-off switch through Phoenix Contact terminal block. You could turn on or off the system power by using this contact. This terminal block support dual function of soft power-on / power-off (instant off or delay second), and suspend mode. GETTING TO KNOW YOUR RCS-000

39 . Main Board Expansion Connectors The graphic below is the top view of the RCS-000 series main board which is the main board used in the RCS-000 series system. It shows the location of the connectors. CN SODIMM 0 JP MH MH SODIMM 0 0 BAT BAT CN A A B B PC 0 CN CN CN0 CN PC S MH9 MH CN J CN0 A A B B CN S J CN CN A A MH B B CN CN JP CN CN MH C C C C CN MH0 MH CN CN MH BZ BZ CN BIOS U MH CN CN9 CN9 CN FAN FAN MH JP J 0 CN MH MH MH A J J JP J 0 CN9 0 MH MH B B A CN MH MH MH MH0 MH J L L L L L L MH R0 R CN R0 R CN R9 R UU U0 U U9 U U U U0 R9 R UU U0 U U9 U U U CN CN CN 9 0 CN CN CN Figure.. Internal Connectors and Jumpers Vecow RCS-000 Series Robust Computing System User Manual GETTING TO KNOW YOUR RCS-000

40 The figure below is the bottom view of the RCS-000 series main board. GETTING TO KNOW YOUR RCS-000

41 .. J Miscellaneous Pin Header 0 JP MH MH 0 0 S A PC A B B 0 A A B B CN BAT PC MH9 MH CN CN CN0 S J MH CN A A B B JP CN CN MH C C C C MH0 MH CN MH BZ CN U MH CN CN9 MH9 MH MH FAN MH JP A J 0 0 A B B MH MH JP J MH MH MH MH0 MH J L L L L L L MH R0 R CN R0 R CN R9 R UU U0 U U9 U U U U0 R9 R UU U0 U U9 U U U CN CN CN 9 0 CN CN CN J Miscellaneous Pin Header Group Pin No. Description HDD LED Reset Button HDLED HD_LED_N FP_RST_BTN_N GND Group Pin No. Description Power PWRLED LED PWROK_00MS_N Power Button FP_RST_BTN_N GND Vecow RCS-000 Series Robust Computing System User Manual GETTING TO KNOW YOUR RCS-000

42 These pin headers can be used as a backup for the following functions: hard drive LED indicator, reset button, power LED indicator, and power-on/off button. The front and top panel already provides access to these functions. The following table shows the pinouts for Miscellaneous port... CFast Card 0 JP MH MH 0 0 S A A PC B B 0 A A B B BAT CN PC CN MH9 MH CN CN CN0 S J MH CN A A B B JP CN CN MH C C C C MH0 MH CN MH BZ CN U MH CN CN9 MH9 MH MH FAN MH JP A J 0 0 A B B MH MH JP J MH MH MH MH0 MH L L L L L L MH R0 R CN R0 R CN R9 R UU U0 U U9 U U U U0 R9 R UU U0 U U9 U U U CN CN CN 9 0 CN CN CN GETTING TO KNOW YOUR RCS-000

43 The RCS-000 series system comes with a CFast socket on the front panel for Type-I / Type-II Compact Flash card. It is implemented by a SATA II Port from QM PCH. Be sure to disconnect the power source and unscrew the CFast socket cover before installing a CFast card. The RCS-000 series does not support the CFast hot swap and PnP (Plug and Play) functions. It is necessary to remove power source first before inserting or removing the CFast card. The following table shows the pinouts for CFast port: CN CFast Pin No. Definition Pin No. Definition S GND PC NC S SATA_TX_P PC GND S SATA_TX_N PC NC S GND PC9 CFAST_LED_N S SATA_RX_N PC0 NC S SATA_RX_P PC NC S GND PC NC PC NC PC +.V PC GND PC +.V PC NC PC GND PC NC PC GND PC NC PC NC Vecow RCS-000 Series Robust Computing System User Manual GETTING TO KNOW YOUR RCS-000

44 .. CN9, CN, J LVDS 0 JP MH MH 0 0 S A A B PC B 0 A A B B CN BAT PC MH9 MH CN CN0 CN S J MH CN A A B B JP CN CN MH C C C C MH0 MH CN MH BZ CN U MH CN CN9 MH9 FAN MH JP 0 CN MH MH A J 0 0 A B B MH MH JP J CN9 MH MH MH MH0 MH L L L L L L MH R0 R CN R0 R CN R9 R UU U0 U U9 U U U U0 R9 R UU U0 U U9 U U U CN CN CN 9 0 CN CN CN The RCS-000 series supports Dual-channel -bit LVDS Panel up to x pixels panel resolution. GETTING TO KNOW YOUR RCS-000

45 Pin No. Definition CN Channel A Definition CN9 Channel LDDC_CLK LDDC_CLK LDDC_DATA LDDC_DATA PANEL_VDD (+.V or +V by jumper) PANEL_VDD(+.V or +V by jumper) LA_ DATA0_P LB_ DATA0_P LA_ DATA_P LB_ DATA_P LA_ DATA0_N LB_ DATA0_N LA_ DATA_N LB_ DATA_N PANEL_VDD (+.V or +V by jumper) PANEL_VDD (+.V or +V by jumper) 9 GND GND 0 LA_ DATA_P LB_ DATA_P LA_ CLKP LB_ CLKP LA_ DATA_N LB_ DATA_N LA_ CLKN LB_ CLKN GND GND GND GND PANEL_BACKLIGHT (+V) PANEL_BACKLIGHT (+V) LA_ DATA_P LB_ DATA_P PANEL_BACKLIGHT (+V) PANEL_BACKLIGHT (+V) 9 LA_ DATA_N LB_ DATA_N 0 GND GND Vecow RCS-000 Series Robust Computing System User Manual GETTING TO KNOW YOUR RCS-000

46 0 JP MH MH 0 0 S A A PC B B 0 A A B B CN PC BAT MH9 MH CN CN CN0 S J MH CN A A B B JP CN CN MH C C C C MH0 MH CN MH BZ CN U MH CN CN9 MH9 FAN MH JP J 0 MH MH A J 0 0 A B B MH MH JP J MH MH MH MH0 MH L L L L L L MH R0 R CN R0 R CN R9 R UU U0 U U9 U U U U0 R9 R UU U0 U U9 U U U CN CN CN 9 0 CN CN CN The LCD inverter is connected to J via a JST -pin,.mm connector to provide +V/+V power to the LCD display. Pin No. Definition Pin No. Definition +V GND +V GND +V LBKLT_EN LBKLT_CTL GETTING TO KNOW YOUR RCS-000 9

47 .. CN, CN SATA-III Connector 0 JP MH MH 0 0 S A A B PC B 0 A A B B CN BAT PC MH9 MH CN CN0 CN S J CN CN A A MH B B JP CN CN CN MH C C C C MH0 MH CN MH BZ CN U MH CN CN9 MH9 MH MH FAN MH JP A J 0 0 A B B MH MH JP J MH MH MH MH0 MH L L L L L L MH R0 R CN R0 R CN R9 R UU U0 U U9 U U U U0 R9 R UU U0 U U9 U U U CN CN CN 9 0 CN CN CN The RCS-000 series features two high performance Serial ATA III interfaces that eases cabling to hard drives or SSD with thin and short cables while application need larger storage capacity. CN, CN_SATA III Connectors Pin No. Definition Pin No. Definition GND RXN TXP RXP TXN GND GND Vecow RCS-000 Series Robust Computing System User Manual GETTING TO KNOW YOUR RCS-000 0

48 .. CN, CN9 SATA-II Connector 0 JP MH MH 0 0 S A A B B PC 0 PC CN A A B B CN BAT MH9 MH CN CN0 S J MH CN A A B B JP CN MH C C C C CN MH0 MH CN CN MH BZ CN U MH CN CN9 CN9 MH9 MH MH FAN MH JP A J 0 0 A B B MH MH JP J MH MH MH MH0 MH L L L L L L MH R0 R CN R0 R CN R9 R UU U0 U U9 U U U U0 R9 R UU U0 U U9 U U U CN CN CN 9 0 CN CN CN The RCS-000 series features two high performance Serial ATA II interfaces that ease cabling to hard drives or SSD with thin and short cables while application need larger storage capacity. CN, CN9_SATA II Connectors Pin No. Definition Pin No. Definition GND RXN TXP RXP TXN GND GND GETTING TO KNOW YOUR RCS-000

49 .. CN, CN0 SATA Power Connector 0 JP MH MH 0 0 S A A B PC B 0 A A B B BAT CN CN0 CN PC MH9 MH CN CN CN0 S J MH CN A A B B JP CN CN MH C C C C MH0 MH CN MH BZ CN U MH CN CN9 MH9 MH MH FAN MH JP A J 0 0 A B B MH MH JP J MH MH MH MH0 MH L L L L L L MH R0 R CN R0 R CN R9 R UU U0 U U9 U U U U0 R9 R UU U0 U U9 U U U CN CN CN 9 0 CN CN CN The RCS-000 series also equips two SATA power connector. It supply V (A max.) and V (A max) current to the hard drive or SSD. CN, CN0 SATA HDD Power Connectors Pin No. Definition Pin No. Definition +V GND GND +V Vecow RCS-000 Series Robust Computing System User Manual GETTING TO KNOW YOUR RCS-000

50 .. SATA DOM Power Connector 0 JP MH MH 0 0 A A B PC B 0 PC S A A CN BAT MH9 MH CN J CN0 B B CN S J MH CN A A B B JP CN CN MH C C C C MH0 MH CN MH BZ CN U MH CN CN9 MH9 MH MH FAN MH JP A J 0 0 A B B MH MH JP J MH MH MH MH0 MH L L L L L L MH R0 R CN R0 R CN R9 R UU U0 U U9 U U U U0 R9 R UU U0 U U9 U U U CN CN CN 9 0 CN CN CN The RCS-000 series also equips two SATA power connector. It supply V (A max.) and V (A max) current to the hard drive or SSD. J SATA DOM Power Connector Pin No. Definition Pin No. Definition +V GND GETTING TO KNOW YOUR RCS-000

51 .. J Internal USB Port 0 JP MH MH 0 0 S A PC A B B 0 A A B B CN BAT PC MH9 MH CN CN CN0 S J MH CN A A B B JP CN CN MH C C C C MH0 MH CN MH BZ CN U MH CN CN9 MH9 MH MH FAN MH JP A J 0 0 A B B J JP J MH MH MH MH MH MH0 MH L L L L L L MH R0 R CN R0 R CN R9 R UU U0 U U9 U U U U0 R9 R UU U0 U U9 U U U CN CN CN 9 0 CN CN CN The RCS-000 series main board provides up to two expansion USB ports using Plug and Play for Dongle Key or LCD touch Panel. The USB interface supports 0 Mbps transfer rate which comply with high speed USB specification Rev..0, and are fuse protected. The USB interface is accessed through one x-pin JST.0mm connector. You will need an adapter cable if you use a standard USB connector. The adapter cable has a x-pin connector on one end and a USB connector on the other. Vecow RCS-000 Series Robust Computing System User Manual GETTING TO KNOW YOUR RCS-000

52 J Internal USB Dual Ports Pin No. Definition Pin No. Definition USB_VCC USBD- USBD+ USBD- USBD+ GND..9 CN Mini PCIe Connector, msata Connector 0 JP MH MH 0 0 S A A B PC B 0 A A B B CN BAT PC MH9 MH CN CN0 CN S J MH CN A A B B JP CN CN MH C C C C MH0 MH CN MH BZ CN U MH CN CN9 CN MH9 MH MH FAN MH JP A J 0 0 A B B MH MH JP J MH MH MH MH0 MH L L L L L L MH R0 R CN R0 R CN R9 R UU U0 U U9 U U U U0 R9 R UU U0 U U9 U U U CN CN CN 9 0 CN CN CN GETTING TO KNOW YOUR RCS-000

53 Both msata and Mini PCIe share the same form-factor and similar electrical pin-out assignments on their connectors. There was no clear mechanism to distinguish if a msata drive or a Mini PCIe device is plugged into the socket until recently that SATA-IO issued an ECN change (ECN #0) to re-define pin on msata connector as no connect instead of return current path ( or GND). When an msata drive is inserted, its pin is no connect, and the respective pin on the socket is being pulled-up to logic. When a Mini PCIe device is inserted, its pin forces the respective pin on the socket to ground, or logic 0. RCS-000 series using Pin status designed for switching between msata drive and Mini PCIe device. Status Mini PCIe card msata drive Pin Logic 0 Logic CN Mini PCIe Connector Pin-Out Pin No. Signal Name Pin No. Signal Name Pin No. Signal Name Pin No. Signal Name Reserved +.Vaux PETp0 GND 9 Reserved 0 GND PETn0 SMB_DATA Reserved +.V 9 GND 0 SMB_CLK Reserved Reserved GND +.V Status Reserved PERp0 GND +.Vaux Reserved PERn0 +.Vaux 9 +.Vaux 0 GND GND PERST# GND USB_D+ 9 Reserved 0 reserved GND USB_D- Reserved GND Mechanical Key GND Reserved CLKREQ# Reserved REFCLK+ Reserved Reserved.V REFCLK- Reserved Reserved GND 9 GND 0 Reserved WAKE#.Vaux Vecow RCS-000 Series Robust Computing System User Manual GETTING TO KNOW YOUR RCS-000

54 ..0 CN Mini PCIe Connector, CN SIM Card 0 JP MH MH 0 0 S A A PC B B 0 A A B B CN PC BAT MH9 MH CN CN CN0 S J MH CN A A B B CN JP CN CN MH C C C C MH0 MH CN MH BZ CN U MH CN CN9 MH9 MH MH FAN MH JP A J 0 0 A B B MH MH JP J MH MH MH MH0 MH L L L L L L MH R0 R CN R0 R CN R9 R UU U0 U U9 U U U U0 R9 R UU U0 U U9 U U U CN CN CN 9 0 CN CN CN GETTING TO KNOW YOUR RCS-000

55 CN Mini PCIe Connector Pin-Out Pin No. Signal Name Pin No. Signal Name Pin No. Signal Name Pin No. Signal Name Reserved +.Vaux PETp0 GND 9 Reserved 0 GND PETn0 SMB_DATA Reserved +.V 9 GND 0 SMB_CLK Reserved Reserved GND +.V Status Reserved PERp0 GND +.Vaux Reserved PERn0 +.Vaux 9 +.Vaux 0 GND GND PERST# GND USB_D+ 9 Reserved 0 reserved GND USB_D- Reserved GND Mechanical Key GND Reserved CLKREQ# Reserved REFCLK+ Reserved Reserved.V REFCLK- Reserved Reserved GND 9 GND 0 Reserved WAKE#.Vaux Vecow RCS-000 Series Robust Computing System User Manual GETTING TO KNOW YOUR RCS-000

56 0 JP MH MH 0 0 S A A PC B B 0 A A B B CN PC BAT MH9 MH CN CN CN0 S J MH CN A A B B CN JP CN CN MH C C C C MH0 MH CN MH BZ CN U MH CN CN9 MH9 MH MH FAN MH JP A J 0 0 A B B MH MH JP J MH MH MH MH0 MH L L L L L L MH R0 R CN R0 R CN R9 R UU U0 U U9 U U U U0 R9 R UU U0 U U9 U U U CN CN CN 9 0 CN CN CN CN SIM Card Pin No. Definition Pin No. Definition C UIM_PWR C GND C UIM_RESET C UIM_VPP C UIM_CLK C UIM_DATA C GND GETTING TO KNOW YOUR RCS-000 9

57 .. CN GPIO CN 0 JP MH MH 0 0 S A A PC B B 0 PC CN A A B B CN BAT MH9 MH CN CN0 S J MH CN A A B B JP CN CN MH C C C C MH0 MH CN MH BZ CN U MH CN CN9 MH9 MH MH FAN MH JP A J 0 0 A B B MH MH JP J MH MH MH MH0 MH L L L L L L MH R0 R CN R0 R CN R9 R UU U0 U U9 U U U U0 R9 R UU U0 U U9 U U U CN CN CN 9 0 CN CN CN The RCS-000 series offers programmable I/O within TTL V tolerance. Using SM-bus GPIO Controller PCA9 at address 0 Vecow RCS-000 Series Robust Computing System User Manual GETTING TO KNOW YOUR RCS-000 0

58 Pin No. Definition Pin No. Definition GND GND DO_GP0_ DI_GP_ DO_GP0_ DI_GP_ DO_GP0_ DI_GP_ DO_GP0_ DI_GP_ GND 9 GND DO_GP0_ 0 DI_GP_ DO_GP0_ DI_GP_ 9 DO_GP0_ DI_GP_ 0 DO_GP0_0 DI_GP_0 GND GND SMB_DAT_MAIN +V SMB_CLK_MAIN +V GETTING TO KNOW YOUR RCS-000

59 .. Fan 0 JP MH MH 0 0 S A A B PC B 0 A A B B CN BAT PC MH9 MH CN CN CN0 S J MH CN A A B B JP CN CN MH C C C C MH0 MH CN MH BZ CN U MH CN CN9 FAN MH MH MH9 FAN MH JP A J 0 0 A B B MH MH JP J MH MH MH MH0 MH L L L L L L MH R0 R CN R0 R CN R9 R UU U0 U U9 U U U U0 R9 R UU U0 U U9 U U U CN CN CN 9 0 CN CN CN AN power connector supported for better thermal required. Pin No. Definition Pin No. Definition GND Fan-speed sense +V (.A max) Vecow RCS-000 Series Robust Computing System User Manual GETTING TO KNOW YOUR RCS-000

60 .. Battery 0 JP MH MH 0 0 BAT S BAT A A B PC B 0 A A B B CN PC MH9 MH CN CN CN0 S J MH CN A A B B JP CN CN MH C C C C MH0 MH CN MH BZ CN U MH CN CN9 MH9 MH MH FAN MH JP A J 0 0 A B B MH MH JP J MH MH MH MH0 MH L L L L L L MH R0 R CN R0 R CN R9 R UU U0 U U9 U U U U0 R9 R UU U0 U U9 U U U CN CN CN 9 0 CN CN CN The RCS-000 series real-time clock is powered by a lithium battery. It is Equipped with Panasonic BR0 90mAh lithium battery. It is recommended that you not replace the lithium battery on your own. If the battery needs to be changed, please contact the Vecow RMA service team. GETTING TO KNOW YOUR RCS-000

61 .. CN PCIe x Slot 0 JP MH MH 0 0 S A A B PC B 0 A A B B CN PC BAT MH9 MH CN CN CN0 S J MH CN A A B B JP CN CN MH C C C C MH0 MH CN MH BZ CN U MH CN CN9 MH9 MH MH FAN MH JP A J JP J 0 0 MH MH B B A CN MH MH MH MH0 MH L L L L L L MH R0 R CN R0 R CN R9 R UU U0 U U9 U U U U0 R9 R UU U0 U U9 U U U CN CN CN 9 0 CN CN CN Pin No. Signal Name Pin No. Signal Name Pin No. Signal Name Pin No. Signal Name A N.C. A GND B +V B PEG_TXN A +V A PEG_RXP B +V B GND A +V A PEG_RXN B +V B GND A GND A GND B GND B PEG_TXP Vecow RCS-000 Series Robust Computing System User Manual GETTING TO KNOW YOUR RCS-000

62 Pin No. Signal Name Pin No. Signal Name Pin No. Signal Name Pin No. Signal Name A CLK_PEGC_ SMB_CLK_ A GND B P MAIN B PEG_TXN A CLK_PEGC_ SMB_DAT_ A PEG_RXP B N MAIN B GND A N.C. A PEG_RXN B GND B N.C. A CLKREQ_ PEGA# A9 GND B +.V B9 GND A9 +.V A0 N.C. B9 N.C. B0 PEG_TXP A0 +.V A GND B0 +.V AUX B PEG_TXN A PLT_RST # A PEG_RXP B WAKE# B GND A GND A PEG_RXN B N.C. B GND A CLK_PEGA_ P A GND B GND B PEG_TX9P A CLK_PEGA_ N A GND B PEG_TX0P B PEG_TX9N A GND A PEG_RX9P B PEG_TX0N B GND A PEG_RX0P A PEG_RX9N B GND B GND A PEG_RX0N A GND B N.C. B PEG_TX0P A GND A9 GND B GND B9 PEGTX0N A9 CLKREQ_ PEGB# A0 PEG_RX0P B9 PEG_TXP B0 GND A0 GND A PEG_RX0N B0 PEG_TXN B GND A PEG_RXP A GND B GND B PEG_TXP A PEG_RXN A GND B GND B PEG_TXN A GND A PEG_RXP B PEG_TXP B GND A GND A PEG_RXN B PEG_TXN B GND A PEG_RXP A GND B GND B PEG_TXP A PEG_RXN A GND B GND B PEG_TXN A GND A PEG_RXP B PEG_TXP B GND A GND A9 PEG_RXN B PEG_TXN B9 GND A9 PEG_RXP A0 GND B9 GND B0 PEG_TXP A0 PEG_RXN A GND B0 N.C. B PEG_TXN A GND A PEG_RXP B N.C. B GND A CLK_PEGB_ P A PEG_RXN B GND B GND A CLK_PEGB_ N A GND B PEG_TXP B PEG_TXP A GND A GND B PEG_TXN B PEG_TXN A PEG_RXP A PEG_RXP B GND B GND A PEG_RXN A PEG_RXN B GND B GND A GND A GND B PEG_TXP B PEG_TXP A GND A9 GND B PEG_TXN B9 PEG_TXN A9 PEG_RXP A0 PEG_RXP B9 GND B0 GND A0 PEG_RXN A PEG_RXN B0 GND B N.C. A GND A GND B PEG_TXP B N.C. GETTING TO KNOW YOUR RCS-000

63 .. CN PCIe x Slot 0 JP MH MH 0 0 BAT CN S A A B PC B 0 PC CN A A B B CN MH9 MH CN CN0 S J MH CN A A B B JP CN CN MH C C C C MH0 MH CN MH BZ CN U MH CN CN9 MH9 MH MH FAN MH JP A J 0 0 A B B MH MH JP J MH MH MH MH0 MH L L L L L L MH R0 R CN R0 R CN R9 R UU U0 U U9 U U U U0 R9 R UU U0 U U9 U U U CN CN CN 9 0 CN CN CN Vecow RCS-000 Series Robust Computing System User Manual GETTING TO KNOW YOUR RCS-000

64 Pin No. Signal Name Pin No. Signal Name Pin No. Signal Name Pin No. Signal Name A N.C. A PCIE_RXN B +V B N.C. A +V A GND B +V B GND A +V A9 N.C. B +V B9 PCIE_TXP A GND A0 GND B GND B0 PCIE_TXN A A A A CLK_ PCIE_ LAN_P CLK_ PCIE_ LAN_N CLK_ PCIE_ LAN_P CLK_ PCIE_ LAN_N A PCIE_RXP B A PCIE_RXN B SMB_CLK_ MAIN SMB_DAT_ MAIN B B GND GND A GND B GND B PCIE_TXP A GND B +.V B PCIE_TXN A9 +.V A PCIE_RXP B9 N.C. B GND A0 +.V A PCIE_RXN B0 +.V AUX B GND A PLT_RST # A GND B WAKE# B PCIE_TXP A GND A GND B N.C. B PCIE_TXN A A CLK_ PCIE_ LAN_P CLK_ PCIE_ LAN_N A9 PCIE_RXP B GND B9 GND A0 PCIE_RXN B PCIE_TXP B0 A GND A GND B PCIE_TXN B CLK_ PCIE_ LAN_P CLK_ PCIE_ LAN_N A PCIE_RXP A N.C. B GND B GND GETTING TO KNOW YOUR RCS-000

65 .. Dual SO-DIMM 0 SODIMM JP MH MH SODIMM 0 0 BAT A A B B PC 0 A A B B S CN PC MH9 MH CN CN0 CN S J MH CN A A B B JP CN CN MH C C C C MH0 MH CN MH BZ CN U MH CN CN9 MH9 MH MH FAN MH JP A J 0 0 A B B MH MH JP J MH MH MH MH0 MH L L L L L L MH R0 R CN R0 R CN R9 R UU U0 U U9 U U U U0 R9 R UU U0 U U9 U U U CN CN CN 9 0 CN CN CN Automatically detect SO-DIMM DDR (.V) or DDRL (.V). It could be manual select DDR voltage in BIOS setup menu. Vecow RCS-000 Series Robust Computing System User Manual GETTING TO KNOW YOUR RCS-000

66 .. CN Multiple I / O Pin No. Signal Name PWRBT_ LED_P PWRBT_ LED_N FP_PWR_ BTN_P Pin No. Signal Name FP_RST_ BTN_N Pin No. Signal Name Pin No. Signal Name DIO_OUT DIO_OUT GND DIO_OUT DIO_OUT PWR_LED_ P GND( Isolated DIO Ground) GND( Isolated DIO Ground) GETTING TO KNOW YOUR RCS-000 9

67 Pin No. Signal Name Pin No. GND Signal Name PWR_LED_ N Pin No. 9 N.C. 0 HDD_LED_P 9 N.C. HDD_LED_ N N.C. N.C. GND( Isolated DIO Ground) GND( Isolated DIO Ground) Signal Name +VDI_COM_ DIO +VDI_COM_ DIO +V_EXT_ DIO +V_EXT_ DIO Pin No. 0 Signal Name +VDI_COM_ DIO +VDI_COM_ DIO +V_EXT_ DIO +V_EXT_ DIO N.C. N.C. DIO_IN0 DIO_IN0 GND GND 9 DIO_IN 0 DIO_IN 9 COM_ COM_ 0 DCD_Z DCD_Z DIO_IN DIO_IN COM_ COM_ DSR_Z DSR_Z DIO_IN DIO_IN COM_ COM_ RXD_Z RXD_Z GND( Isolated DIO Ground) GND( Isolated DIO Ground) GND GND DIO_IN DIO_IN COM_ COM_ RTS_Z RTS_Z 9 DIO_IN 0 DIO_IN 9 COM_ COM_ 0 TXD_Z TXD_Z DIO_IN DIO_IN COM_ COM_ CTS_Z CTS_Z DIO_IN DIO_IN GND GND GND( GND( COM_ COM_ Isolated DIO Isolated DIO DTR_Z DTR_Z Ground) Ground) DIO_OUT0 DIO_OUT0 COM_RI_Z COM_RI_Z 9 DIO_OUT 0 DIO_OUT 9 GND 90 GND DIO_OUT DIO_OUT 9 N.C. 9 N.C. DIO_OUT DIO_OUT 9 +V AUX 9 +V AUX GND( Isolated DIO Ground) GND( Isolated DIO Ground) 9 USB_D_N 9 USB_D_N DIO_OUT DIO_OUT 9 USB_D_P 9 USB_D_P 9 DIO_OUT 0 DIO_OUT 99 GND 00 GND. Main Board Jumper Setting The figure below is the top view of the RCS-000 series main board which is the main board used in the RCS-000 series system. It shows the location of the jumpers. Vecow RCS-000 Series Robust Computing System User Manual GETTING TO KNOW YOUR RCS-000 0

68 0 JP JP MH MH 0 0 S A A B B PC 0 A A B B CN BAT PC MH9 MH CN CN0 CN S J MH CN A A B B JP JP CN CN MH C C C C MH0 MH CN MH BZ CN U MH CN CN9 MH9 MH MH FAN J MH JP JP A A B B MH MH JP JP J MH MH MH MH0 MH L L L L L L MH R0 R CN R0 R CN R9 R UU U0 U U9 U U U U0 R9 R UU U0 U U9 U U U CN CN CN 9 0 CN CN CN You may configure your card to match the needs of your application by setting jumpers. A jumper is a metal bridge used to close an electric circuit. It consists of two metal pins and a small metal clip (often protected by a plastic cover) that slides over the pins to connect them. To close a jumper, you connect the pins with the clip. To open a jumper, you remove the clip. Sometimes a jumper will have three pins, labeled, and. In this case you would connect either pins and, or and. GETTING TO KNOW YOUR RCS-000

69 .. JP AT/ ATX Power Mode Jumper Setting 0 JP MH MH 0 0 PC S A A B B 0 A A B B CN PC BAT MH9 MH CN CN CN0 S J MH CN A A B B JP CN CN MH C C C C MH0 MH CN MH BZ CN U MH CN CN9 MH9 MH MH FAN MH JP A J 0 0 A B B MH MH JP JP J MH MH MH MH0 MH L L L L L L MH R0 R CN R0 R CN R9 R UU U0 U U9 U U U U0 R9 R UU U0 U U9 U U U CN CN CN 9 0 CN CN CN The RCS-000 series main board contains a jumper that can switch the AT/ATX Power Setting. Normally this jumper should be set with Pin and Pin in ATX power mode. And power on the system by the -pin terminal block at the top panel. If you set it with Pin and Pin in AT power mode. It will send the power button signal to power on the system automatically. Setting Description Setting Description - AT Mode - ATX Mode (Default) Vecow RCS-000 Series Robust Computing System User Manual GETTING TO KNOW YOUR RCS-000

70 .. JP LVDS Backlight Power Selection 0 JP MH MH 0 0 S PC A A B B 0 A A B B CN BAT PC MH9 MH CN CN0 CN S J MH CN A A B B JP CN CN MH C C C C MH0 MH CN MH BZ CN U MH CN CN9 MH9 MH MH FAN J MH JP JP A A B B MH MH JP J MH MH MH MH0 MH L L L L L L MH R0 R CN R0 R CN R9 R UU U0 U U9 U U U U0 R9 R UU U0 U U9 U U U CN CN CN 9 0 CN CN CN JP provides LVDS voltage selection function, closing Pin, is for.v LVDS power input; closing Pin, is for V LVDS power input. Setting Description Setting Description - +.V (Default) - +V GETTING TO KNOW YOUR RCS-000

71 .. JP PCIe x Configuration 0 JP MH MH 0 0 S A A B PC B 0 A A B B CN BAT PC MH9 MH CN CN CN0 S J MH CN A A B B JP JP CN CN MH C C C C MH0 MH CN MH BZ CN U MH CN CN9 MH9 MH MH FAN MH JP A J 0 0 A B B MH MH JP J MH MH MH MH0 MH L L L L L L MH R0 R CN R0 R CN R9 R UU U0 U U9 U U U U0 R9 R UU U0 U U9 U U U CN CN CN 9 0 CN CN CN Model PCI & PCIe Slot Setting Description RCS- PCI + PCIe x (-), (-) X, x, x RCS-A PCI + PCIe x + PCIe x (-), (-) X, x, x RCS-0 PCI (-), (-) X (Default) RCS-0 PCIe x + PCIe x (-), (-) X (Default) RCS-0A PCIe x (-), (-) X, x RCS- PCI + PCIe x (-), (-) X (Default) Vecow RCS-000 Series Robust Computing System User Manual GETTING TO KNOW YOUR RCS-000

72 .. JP(A) CMOS Clear Jumper Setting 0 JP JP MH MH 0 0 S A A PC B B 0 A A B B CN PC BAT MH9 MH CN CN CN0 S J MH CN A A B B JP CN CN MH C C C C MH0 MH CN MH BZ CN U MH CN CN9 MH9 MH MH FAN MH JP A J 0 0 A B B MH MH JP J MH MH MH MH0 MH L L L L L L MH R0 R CN R0 R CN R9 R UU U0 U U9 U U U U0 R9 R UU U0 U U9 U U U CN CN CN 9 0 CN CN CN Setting Description Setting Description - Normal (Default) - Clear CMOS GETTING TO KNOW YOUR RCS-000

73 .. JP(B) CMOS Clear Jumper Setting 0 JP JP MH MH 0 0 S A A B PC B 0 A A B B CN BAT PC MH9 MH CN CN0 CN S J MH CN A A B B JP CN CN MH C C C C MH0 MH CN MH BZ CN U MH CN CN9 MH9 MH MH FAN MH JP A J 0 0 A B B MH MH JP J MH MH MH MH0 MH L L L L L L MH R0 R CN R0 R CN R9 R UU U0 U U9 U U U U0 R9 R UU U0 U U9 U U U CN CN CN 9 0 CN CN CN Setting Description Setting Description - Normal (Default) - Clear ME Vecow RCS-000 Series Robust Computing System User Manual GETTING TO KNOW YOUR RCS-000

74 HARDWARE INSTALLATION Step. How To Open Your RCS-00 Chassis Remove the top cover of the chassis, loosen the thumbscrews on the front panel by hand screwdriver. Push out the top cover as the image. Push up the top cover as the image. HARDWARE INSTALLATION

75 Step. Installing DDR SO-DIMM Modules Repeat Step. Tile the SODIMM module and insert it to the SODIMM socket. As it s firmly contacted with socket connectors, press it down until the clamps of the socket snap into the latching position of SODIMM module. Vecow RCS-000 Series Robust Computing System User Manual HARDWARE INSTALLATION

76 Step. Installing PCI/PCIe Card Repeat Step. Loosen M PCI/PCIe bracket screw. Remove PCI/PCIe bracket, then install PCI/PCIe module, then inser the PCI/ PCIe card. Fasten M PCI/PCIe bracket screw. HARDWARE INSTALLATION 9

77 Step. Installing HDD/SSD Repeat Step. Loosen pcs F #x screws from the top of the SSD/HDD cover by screwcriver. Lift the HDD/SSD cover as the image. Make sure the screw hold of HDD/SSD cover to match HDD/SSD. (Image ) Vecow RCS-000 Series Robust Computing System User Manual HARDWARE INSTALLATION 0

78 Fasten pcs KH-Mx screws to fix the HDD/SSD. (Image) Install SATA cable to HDD/SSD. (Image) Replace the HDD/SSD cover, then fasten pcs F #x screws. Install SATA cable to mainboard. HARDWARE INSTALLATION

79 Step. Installing Mini PCIe Module Repeat Step. Loosen pcs F #x screws. Loosen pcs KSH #- screws as yellow circle and pcs F #x screws as red circle. Check Mini PCIe socket as red circle. Put your Mini PCIe card in the socket of mainboard, then fasten pcs BH M.x screws to lock your Mini PCIe card firmly. Vecow RCS-000 Series Robust Computing System User Manual HARDWARE INSTALLATION

80 Step. Installing CPU Repeat Step. Loosen pcs F #x screws. Loosen pcs KSH #- screws as yellow circle and pcs F #x screws as red circle. Loosen 9 pcs PH Mx screws for Riser Card. Remove Riser Card HARDWARE INSTALLATION

81 Loosen pcs F #x screws. Push chassis as the image and image. Loosen pcs Mx Spring screws and pcs PH Mx screws. Vecow RCS-000 Series Robust Computing System User Manual HARDWARE INSTALLATION

82 Turn back the mainboard, then check CPU socket. Note CPU and CPU socket triangle arrow to be the same direction. Put the CPU to CPU socket and lock CPU socket. Step. Installing Wall-mounting Bracket Turn to the bottom and install Wall-mounting Bracket. Fix two Wall-mounting brackets to the chassis with pcs KH #- screws. HARDWARE INSTALLATION

83 BIOS AND DRIVER SETTING. BIOS Settings.. BIOS Setup The board uses UEFI BIOS that is use Serial Peripheral Interface (SPI) Flash. The SPI Flash contains the BIOS Setup program, POST, the PCI autoconfiguration utility, LAN, EEPROM information, and Serial port support. The BIOS setup program is accessed by pressing the <Del> key after the Power- On Self-Test (POST) memory test begins and before the operating system boot begins. The menu bar is shown below. Aptio Setup Utility Copyright (C) 0 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit Figure --: BIOS Menu Bar Vecow RCS-000 Series Robust Computing System User Manual BIOS AND DRIVER SETTING

84 . Main Menu.. BIOS Main Menu Phoenix SecureCore(tm) Setup Utility Main Advanced Chipset Boot Security Save & Exit BIOS Information BIOS Vendor American Megatrends BIOS Version Vecow ECS b Release time /9/0 :: Item Specific Help Processor information Brand String Intel (R) Core (TM) i-0 DIMM#0 DIMM#0 DIMM#0 DIMM#0 9MB (DDR) Not Present Not Present Not Present System Language [English] System Date [Thu 0//0] System Time [:00:00] Figure --: BIOS Main screen System Time/ Date : Press TAB key to switch sub-items of value.then press + key or - key number key for modify value. In this page, you could make sure you CPU type and DRAM type that you are install into this system. BIOS AND DRIVER SETTING

85 . Advanced Function.. ACPI Setting Phoenix SecureCore(tm) Setup Utility Main Advanced Chipset Boot Security Save & Exit ACPI Settings Enable ACPI Auto Configuration [Disabled] Item Specific Help Enable Hibernation [Enabled] Figure --: ACPI Setting setup screen Enable ACPI Auto Configuration: This system support ACPI function as auto process. You should Enable / Disable that depend as your O.S. Enable Hibernation: It is able to use Hibernate function if O.S support. But some O.S maybe not effective with this function. Vecow RCS-000 Series Robust Computing System User Manual BIOS AND DRIVER SETTING

86 .. Trusted Computing Phoenix SecureCore(tm) Setup Utility Main Advanced Chipset Boot Security Save & Exit Configuration Security Device Support [Disabled] Item Specific Help Current Status Information SUPPORT TURNED OFF Figure -- : Serial Port Setup screen Serial Port : Enable or Disable Serial port. Security Device Support : Enables or Disables BIOS support for security device. O.S. will now show Security Device. TCG EFT protocol and INTA interface will not be available. Current Status Information : Show as below option SUPPORT TURNED OFF SUPPORT TURNED ON BIOS AND DRIVER SETTING 9

87 .. CPU Configuration Phoenix SecureCore(tm) Setup Utility Main Advanced Chipset Boot Security Save & Exit CPU Configuration Item Specific Help Intel (R) Core (TM) i-0qe Inter Virtualization Technology [Disable] Figure -- : CPU Configuration Setup screen Intel Virtualization Technology : This for for Virtualization Application or platform usage, when enabled, a VMM can utilize the additional hardware capabilities provided by Vanderpool Technology, Vecow RCS-000 Series Robust Computing System User Manual BIOS AND DRIVER SETTING 0

88 .. SATA Configuration Phoenix SecureCore(tm) Setup Utility Main Advanced Chipset Boot Security Save & Exit SATA Controller(s) SATA Model Selection [Enabled] [IDE] Item Specific Help Serial ATA Port 0 Serial ATA Port Serial ATA Port Serial ATA Port Serial ATA Port Serial ATA Port Empty WDC WD0 Empty Empty Empty Empty Figure -- : SATA Configuration setup screen SATA Controller(s) : 090 Enables or Disables integrate SATA controller for Storage device use. SATA Mode Selection : Determines how the SATA transfer mode for operate. Here have three option for choice [IDE] / [AHCI] / [RAID]. For the RAID mode operate, please see appendix E. for detail information. Serial Port 0~ : This system offers six SATA port for connection SATA device. BIOS AND DRIVER SETTING

89 .. AMT Configuration Phoenix SecureCore(tm) Setup Utility Main Advanced Chipset Boot Security Save & Exit Intel AMT BIOS Hotkey Pressed MEBx Selection Screen [Enabled] [Disabled] [Disabled] Item Specific Help Figure -- : AMT Setup screen Intel AMT : Enables or Disables Intel(R) Active Management Technology BIOS extension. This option just controls the BIOS extension executes. Vecow RCS-000 Series Robust Computing System User Manual BIOS AND DRIVER SETTING

90 .. Serial Port Configuration Advanced ITF Super IO Configuration Serial Port Phoenix SecureCore(tm) Setup Utility Main Advanced Chipset Boot Security Save & Exit Serial Port Configuration Item Specific Help Serial Port Device Settings [Enabled] IO=Fh; IRQ=; Change Settings [IO=Fh; IRQ=;] Figure -- : Serial Port Setup screen Serial Port : Enable or Disable Serial Port. Device Setting: Current IO address and interrupt resource of Serial Port. Change Settings : Select another device setting. Here have option : IO=Fh; IRQ=; IO=Fh; IRQ=; IO=Eh; IRQ=0; IO=Eh; IRQ=; BIOS AND DRIVER SETTING

91 .. Serial Port Configuration Advanced ITF Super IO Configuration Serial Port Phoenix SecureCore(tm) Setup Utility Main Advanced Chipset Boot Security Save & Exit Serial Port Configuration Item Specific Help Serial Port Device Settings [Enabled] IO=Fh; IRQ=; Change Settings Interface Mode [IO=Fh; IRQ=;] [RS- Mode] Figure -- : Serial Port Setup screen Serial Port : Enable or Disable Serial Port. Device Setting : Current IO addresses and interrupts resource of Serial Port. Change Settings : Select another device setting. Here have option : IO=Fh; IRQ=; IO=Fh; IRQ=; IO=Eh; IRQ=0; IO=Eh; IRQ=; Interface Mode: Here have option : RS- Mode RS- Mode RS- Mode Vecow RCS-000 Series Robust Computing System User Manual BIOS AND DRIVER SETTING

92 .. Serial Port Configuration Advanced ITF Super IO Configuration Serial Port Phoenix SecureCore(tm) Setup Utility Main Advanced Chipset Boot Security Save & Exit Serial Port Configuration Item Specific Help Serial Port Device Settings [Enabled] IO=Eh; IRQ=0; Change Settings [IO=Eh; IRQ=0;] Figure -- : Serial Port Setup screen Serial Port : Enable or Disable Serial Port. Device Setting: Current IO address and interrupt resource of Serial Port. Change Settings : Select another device setting. Here have option : IO=Fh; IRQ=; IO=Fh; IRQ=; IO=Eh; IRQ=0; IO=Eh; IRQ=; IO=F0h; IRQ=; IO=E0h; IRQ=; BIOS AND DRIVER SETTING

93 ..9 Serial Port Configuration Advanced ITF Super IO Configuration Serial Port Phoenix SecureCore(tm) Setup Utility Main Advanced Chipset Boot Security Save & Exit Serial Port Configuration Item Specific Help Serial Port Device Settings [Enabled] IO=Fh; IRQ=; Change Settings [IO=Fh; IRQ=;] Figure --9 : Serial Port Setup screen Serial Port : Enable or Disable Serial Port. Device Setting: Current IO address and interrupt resource of Serial Port. Change Settings : Select another device setting. Here have option : IO=Fh; IRQ=; IO=Fh; IRQ=; IO=Eh; IRQ=0; IO=Eh; IRQ=; IO=F0h; IRQ=; IO=E0h; IRQ=; Vecow RCS-000 Series Robust Computing System User Manual BIOS AND DRIVER SETTING

94 . Chipset Function.. WOL Configuration Chipset PCH-IO Configuration Wake on LAN Phoenix SecureCore(tm) Setup Utility Main Advanced Chipset Boot Security Save & Exit PCH LAN Controller [ Enabled ] Wake on LAN [Enabled] Item Specific Help Figure -- : Network Setup screen PCH LAN Controller : Enable or Disable on board network device. Wake on LAN : Enable or Disable integrated LAN to wake the system. This function also can active by O.S. BIOS AND DRIVER SETTING

95 .. Power Loss Configuration Chipset PCH-IO Configuration Restore AC Power Loss Phoenix SecureCore(tm) Setup Utility Main Advanced Chipset Boot Security Save & Exit Restore AC Power Loss [Last State ] Item Specific Help Figure -- : Power Loss Setup screen Restore AC Power Loss : [Power Off] : When plug-in the power source, system will keep on SB mode. [Power On] : When plug-in the power source, system will auto booting. Last State] : When plug-in the power source, system will keep on last power status. Vecow RCS-000 Series Robust Computing System User Manual BIOS AND DRIVER SETTING

96 . Boot Function.. Boot Option Phoenix SecureCore(tm) Setup Utility Main Advanced Chipset Boot Security Save & Exit Boot Configuration Item Specific Help Boot option # [SATA PS:Device Name ] Boot option # [SATA PS:Device Name ] Figure -- : Boot Setup screen Boot option: When you press Enter, you can select which device you would like to boot. BIOS AND DRIVER SETTING 9

97 A APPENDIX A : ISOLATED DIO GUIDE Description: Initialize hardware and resources, and get number of functional borads. Syntax: I _mnet0_open () Argument: Name Type Description N / C Return: Return Value ERR_NoError Other Description The function finished execution successfully. Please reference to the Appendix error table. Description: Get the local DI value. Syntax: I _mnet0_read_port( U Offset, U *Val ) Argument: Return: Name Type Description Offset U Pointer the access DI port address Val [output] U * Return the value of local input interface. Return Value ERR_NoError Other Description The function finished execution successfully. Please reference to the Appendix error table. Vecow RCS-000 Series Robust Computing System User Manual Appendix A 90

98 Description: Get the local DI value. Syntax: I _mnet0_write_port( U Offset, U Val ) Argument: Return: Name Type Description Offset U Pointer the access DI port address Val U Write the value of local input interface. Return Value ERR_NoError Other Description The function finished execution successfully. Please reference to the Appendix error table. Appendix A 9

99 B APPENDIX B : GPIO & WDT FUNCTION The GPIO& WDT are using internal Super IO function. However, you must entry super I/O configuration mode to set it. The output port is set as GPIO on CN, reg. index = 0x0 The input port is set as GPIO on CN, reg. index = 0x. Super I/O special address port = 0xE Super I/O special data port = 0xF GPIO Logical device is 0x0 A. Super I/O Definition //write twice 0x value. outportb(super I/O special address port, 0x); outportb(super I/O special address port, 0x0); outportb(super I/O special address port, 0x); outportb(super I/O special address port, 0x); B. Located on Logical Device //write 0x0 on Reg [0x0], this setup must follow Step A. that can be workable. outportb(super I/O special address port, 0x0); outportb(super I/O special data port, 0x0); C. Access the Super I/O Register Base control for write Super I/O register. outportb(special address port, Register Index.); outportb(special data port, update_value); Base control for read Super I/O register outportb(special address port, Register Index.); inportb(special data port); //It will return a BYTE value. Vecow RCS-000 Series Robust Computing System User Manual Appendix B 9

100 D. Start to Access the ECS-00-PoE GPIO Port Please refer to source code for set_data() and get_data() function. Write data to GPO(output) port set_data( Register Index, update_value); example : unsigned char data = 0x; set_data( 0xE, data); //Set bit & bit of GPO output port as High level,another bit is Low Please refer to source code for set_data() and get_data() function. Read data to GPI(input) port get_data( Register Index ) //It will return a BYTE value. example : unsigned char data get_data( 0xF, data); //Get GPI(input) port status on input_data variable. E. WDT ON/OFF and Timer-Counter setting Refer to GPIO setting of Step A and B., located Logical 0x0 for WDT function. Reg [0x0] is WatchDog ON/OFF control. WatchDog On : set_data( 0x0, 0x0); WatchDog Off : set_data( 0x0, 0x00); Reg [0xF0] is WatchDog timer - counteron/off control. WatchDog counter start : WatchDog counter start : set_data( 0xF0, 0x0); set_data( 0xF0, 0x00); Reg [0xF] is WatchDog time-out value, "Reading" this register returns the current value in the Watch Dog Counter, not the Watch Dog Timer Time-out value.. WatchDog time-out value : set_data( 0xF, ); Appendix B 9

101 C APPENDIX C : RAID INSTALLATION GUIDE Valuable digital memories are protected against a hard drive failure when the system is configured for any one of three fault-tolerant RAID levels: RAID 0, RAID, RAID or RAID 0. By seamlessly storing copies of data on one or more additional hard drives, any hard drive can fail without data loss or system downtime. When the failed drive is removed and a replacement hard drive is installed, data fault tolerance is easily restored. A. SATA Mode for RAID Please select SATA Device to RAID mode on BIOS menu. Advanced->SATA Configuration-> SATA Mode Selection Vecow RCS-000 Series Robust Computing System User Manual Appendix C 9

102 B. Install O.S. RCS-000 series is equipped with SATA ports, include internal SATA ports, msata ports and CFAST port. You can select one of SATA port for OS installation. We use CFAST card for Windows OS installation as an example. For WinXP installation, you should press F while the installation program starting for RAID driver installation. And the best solution that show as item. ACHI operate. C. Install All Device Drivers Please follow installation sequences:.to install chipset driver.to install network driver.to install ME driver ( if available).to install audio driver.to install VGA driver D. Install Intel Rapid Storage Tech. Software You can get the software on RCS-000 driver CD. Also, you can find latest information and software directly from Intel website. The RAID environment has been done if you completed the steps above. E. Insert SATA HDD for RAID Please notice, you can use SATA ports for SATA HDD, except the CFAST port. F. Enable Hot Plug Function Please enable Hot Plug for HardDisk or RAID volume Appendix C 9

103 G. Create RAID Volume on Rapid Storage Tech. Software Because we only have SATA HDDs for RAID volume, there are three options on this page we can choose. We take RAID as our example, please select RAID. H. Partition on Disk Management After created RAID volume, you can see the SATA device allocation figure. Vecow RCS-000 Series Robust Computing System User Manual Appendix C 9

104 You can see Volume_000 in SATA device of BIOS menu. To start Disk Management tool and select Initialize Disk Then add Logical device for Windows access. I. HDD Caution Sign on RAID Volume Appendix C 9

105 J. Recovery & Auto Re-Build When Use the SAME RAID HDD K. Recovery & Auto Re-Build When Use the DIFFERENT RAID HDD There is a warning will pop-up to ask you if the disk is not a member of original RAID volume. If you press Rebuild, it will replace the broken SATA HDD to the last one SATA HDD of RAID volume. * If more help is needed, please contact Vecow Technical Support Vecow RCS-000 Series Robust Computing System User Manual Appendix C 9