exam.157q. Number: Passing Score: 800 Time Limit: 120 min File Version: 1. Microsoft

Transcription

1 exam.157q Number: Passing Score: 800 Time Limit: 120 min File Version: 1 Microsoft Core Solutions of Microsoft Exchange Server 2013

2 Question Set 1 QUESTION 1 You deploy a server that has the Exchange Server 2013 Mailbox server role and Client Access server role installed. You need to configure anti-spam to meet the following requirements: messages sent from the Internet to a distribution list named Executives must be rejected. messages that contain the words casino and jackpot must be rejected, unless they were sent to legal@contoso.com. Which three cmdlets should you run? (Each correct answer presents part of the solution. Choose three.) A. Add ContentFilterPhrase B. Set-ContentFilterConfig C. Set-TransportConfig D. Set-SenderReputationConfig E. Set-RecipientFilterConfig Correct Answer: ABE : Add ContentFilterPhrase The Add-ContentFilterPhrase cmdlet adds phrases to the Allow or Block phrases list. Use the Add-ContentFilterPhrase cmdlet to define custom words for the Content Filter agent. A custom word is a word or phrase that the administrator sets for the Content Filter agent to evaluate the content of an message and apply appropriate filter processing. Set-RecipientFilterConfig Adds two users to the Blocked Recipients list. QUESTION 2 Your company named Contoso, Ltd., has an Exchange Server 2013 organization named contoso.com. The network contains an Active Directory domain. The domain contains an organizational unit (OU) named SalesOU. SalesOU contains two users named User1 and User2. Contoso purchases a domain name adatum.com. You need to change the primary SMTP address of all the users in SalesOU to use the SMTP suffix of adatum.com. The solution must not remove the contoso.com

3 address. Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.) A. Create a new address policy and apply the policy to the users in SalesOU. B. Change the default address policy to include adatum.com. C. Create a new remote domain for adatum.com. D. Create a new accepted domain for adatum.com and set the domain type to Authoritative Domain. E. Create a new accepted domain for adatum.com and set the domain type to External RelayDomain. Correct Answer: AD : Address Policies Applies to: Exchange Server 2013 Recipients (which include users, resources, contacts, and groups) are any mail-enabled object in Active Directory to which Microsoft Exchange can deliver or route messages. For a recipient to send or receive messages, the recipient must have an address. address policies generate the primary and secondary addresses for your recipients so they can receive and send . By default, Exchange contains an address policy for every mail-enabled user. This default policy specifies the recipient's alias as the local part of the address and uses the default accepted domain. The local part of an address is the name that appears before the at sign (@). However, you can change how your recipients' addresses will display. For example, you can specify that the addresses display as firstname.lastname@contoso.com. Looking for management tasks related to address policies? See Address Policy Procedures. A: Need to create a new address policy D: There are three types of accepted domains: authoritative, internal relay, and external relay. Configure an Accepted Domain within Your Exchange Organization as Authoritative

4 Applies to: Exchange Server 2013 If a domain belonging to your organization hosts mailboxes for all the recipients within an SMTP namespace, that domain is considered to be authoritative. By default, one accepted domain is configured as authoritative for the Exchange organization. If your organization has more than one SMTP namespace, you can configure more than one accepted domain as authoritative. QUESTION 3 DRAG DROP You have an Exchange Server 2013 organization named Contoso. The organization is configured to apply a disclaimer to all messages sent to external recipients. Your company works with a partner company named ADatum Corporation. ADatum has an SMTP domain named adatum.com. You need to ensure that messages sent to adatum.com meet the following compliance requirements: Messages sent to adatum.com must NOT include the disclaimer. Messages that contain credit card numbers must NOT be sent to adatum.com. If a user writes a message that contains a credit card number and the message is addressed to a recipient at adatum.com, the user must receive a notification before the message is sent. What should you configure for each requirement? To answer, drag the appropriate configuration to the correct requirement in the answer area. Each configuration may be used once, more than once, or not at all. Additionally, you may need to drag the split bar between panes or scroll to view content. Select and Place:

5 Correct Answer:

6 : * Each transport rule can have exceptions that specify what to exclude from the condition. Exceptions typically determine a subset of criteria identified in the condition. If you use transport rules, you can specify what information you don't want to enter or leave the organization, which individuals or groups shouldn't be able to communicate with one another, how messages are handled based on how they are classified by the sender, and more. * The Data loss prevention (DLP) feature in the new Exchange will help you identify, monitor, and protect sensitive information in your organization through deep content analysis. DLP is increasingly important for enterprise message systems because business critical includes sensitive data that needs to be protected. It s the financial information, personally identifiable information (PII) and intellectual property data that can be accidently sent to unauthorized users that keeps the CSO up all night. * Policy Tip notification messages are displayed to users in Outlook while they are composing an message. Policy Tip notification messages only show up if something about the sender s message seems to violate a DLP policy that you have in place and that policy includes a rule to notify the sender when the conditions that you establish are met. QUESTION 4 DRAG DROP You have an Exchange Server 2013 organization that contains three servers named EX1, EX2, and EX3. The servers are members of a database availability group (DAG) named DAG1. A mailbox database named DB1 is replicated to all the members of DAG1. EX3 experiences a complete hardware failure. You need to restore EX3 on a new server. You reset the computer account for EX3. Which three actions should you perform next? To answer, move the three appropriate actions from the list of actions to the answer area and arrange them in the correct order. Select and Place:

7 Correct Answer:

8 : Use Setup /m:recoverserver to recover a server Retrieve any replay lag or truncation lag settings for any mailbox database copies that exist on the server being recovered by using the Get-MailboxDatabase cmdlet.

9 (Box 1) Remove any mailbox database copies that exist on the server being recovered by using the Remov boxDatabaseCopy cmdlet. (Box 1) Remove the failed server's configuration from the DAG by using the Remove-DatabaseAvailabilityGroupServercmdlet. Reset the server's computer account in Active Directory. For detailed steps, see Reset a Computer Account. (Box 2) Open a Command Prompt window. Using the original Setup media, run the following command: Setup /m:recoverserver (Box 3) When the Setup recovery process is complete, add the recovered server to the DAG by using the Add-DatabaseAvailabilityGroupServercmdlet. (Box 3) After the server has been added back to the DAG, you can reconfigure mailbox database copies by using the Add-MailboxDatabaseCopycmdlet. * You can recover a lost server by using the Setup /m:recoverserver switch in Microsoft Exchange Server Most of the settings for a computer running Exchange 2013 are stored in Active Directory. The /m:recoverserver switch rebuilds an Exchange server with the same name by using the settings and other information stored in Active Directory. References: Recover a Database Availability Group Member Server Recover a Database Availability Group Member Server: Exchange 2013 Help QUESTION 5 DRAG DROP You have an Exchange Server 2013 organization that contains five servers. Several employees plan to use Microsoft Outlook to collaborate on some projects. You need to configure access to Outlook to meet the following requirements: Several employees must be able to open only the Inbox of a user named User1. Several employees must be able to copy messages from any folder in the mailbox of a user named User2. Several employees must be able to create only contacts in the mailbox of a user named User3. Which cmdlets should you use? To answer, drag the appropriate cmdlet to the correct requirement in the answer area. Each cmdlet may be used once, more than once, or not at all. Additionally, you may need to drag the split bar between panes or scroll to view content. Select and Place:

10 Correct Answer: : Add-MailboxFolderPermission

11 Use the Add-MailboxFolderPermission cmdlet to manage folder-level permissions for all folders within a user's mailbox. Set-Mailbox Use the Set-Mailbox cmdlet to modify the settings of an existing mailbox. You can use this cmdlet for one mailbox at a time. To perform bulk management, you can pipeline the output of various Get- cmdlets (for example, the Get-Mailbox or Get-User cmdlets) and configure several mailboxes in a single-line command. You can also use the Set-Mailbox cmdlet in scripts. STEPS 1. Use the Add-MailboxFolderPermission cmdlet to manage folder-level permissions for all folders within a user's mailbox. 2. Use the Add-MailboxPermission cmdlet to add permissions to a mailbox. 3. Use the Add-MailboxFolderPermission cmdlet to manage folder-level permissions for all folders within a user's mailbox. References: Add-MailboxPermission: Exchange 2013 Help Add-MailboxFolderPermission: Exchange 2013 Help QUESTION 6 Your company has offices in Miami, Singapore and Montreal. An Active Directory site exists for each office. You have an Exchange Server 2013 organization that contains a server in each site. Each server has the Mailbox server role and the Client Access Server role installed. All users connect to the Miami servers to retrieve the public folder hierarchy. You need to create several public folders on the server in the Singapore office to meet the following requirements: Ensure that the public folders are available if a single Mailbox server fails. Ensure that the users in the Singapore office connect to their local server to retrieve the public folder hierarchy. Which actions should you perform? (Each correct answer presents part of the solution. Choose all that apply.) A. Create a new public folder mailbox. B. Create a new public folder database. C. Run the Add-MailboxDatabaseCopy cmdlet. D. For each mailbox in the Singapore office, run the Set-Mailbox cmdlet and specify the defaultpublicfoldermailbox parameter. E. Run the Set-PublicFolderDatabase cmdlet. F. For each public folder mailbox, run the Set-Mailbox cmdlet and specify the defaultpublicfoldermailbox parameter. Correct Answer: ACD

12 : Public Folders Public folders can also be used as an archiving method for distribution groups. When you mail-enable a public folder and add it as a member of the distribution group, sent to the group is automatically added to the public folder for later reference. Public folders are designed for shared access and provide an easy and effective way to collect, organize, and share information with other people in your workgroup or organization. Public folders help organize content in a deep hierarchy that s easy to browse. Users will see the full hierarchy in Outlook, which makes it easy for them to browse for the content they re interested in. Public folder architecture In Exchange 2013, public folders were re-engineered using mailbox infrastructure to take advantage of the existing high availability and storage technologies of the mailbox database. Public folder architecture uses specially designed mailboxes to store both the public folder hierarchy and the content. This also means that there s no longer a public folder database. High availability for the public folder mailboxes is provided by a database availability group (DAG). A: Need to create a public folder mailbox in the Singapore office. C: Use the Add-MailboxDatabaseCopy cmdlet to create a passive copy of an existing active mailbox database. D: Use the Set-MailboxServer cmdlet to modify attributes on a computer running Microsoft Exchange Server 2013 with the Mailbox server role installed. In Exchange 2007 and Exchange 2010, you could specify which users had access to specific public folders. In Exchange 2013, you can set the default public folder mailbox per user. To do so, run the Set-Mailbox cmdlet with the DefaultPublicFolderMailbox parameter. This ensures that the users in the Singapore office connect to their local server to retrieve the public folder hierarchy. QUESTION 7 DRAG DROP You have an Exchange Server 2013 organization that contains two servers. The servers are configured as shown in the following table.

13 You need to create a new database availability group (DAG) that contains EX1 and EX2. Which three actions should you perform? To answer, move the three appropriate actions from the list of actions to the answer area and arrange them in the correct order. Select and Place:

14 Correct Answer:

15 : * A database availability group (DAG) is a set of up to 16 Microsoft Exchange Server 2013 Mailbox servers that provide automatic database-level recovery from a database, server, or network failure. When a Mailbox server is added to a DAG, it works with the other servers in the DAG to provide automatic, database-level recovery from database, server, and network failures. * You can specify a name for the DAG and the witness server that you want to use, and leave the Witness directory field empty. In this scenario, the task will create

16 the default witness directory on the specified witness server. * If the witness server you specify isn't an Exchange 2013 or Exchange 2010 server, you must add the Exchange Trusted Subsystem universal security group to the local Administrators group on the witness server. These security permissions are necessary to ensure that Exchange can create a directory and share on the witness server as needed. References: QUESTION 8 You have an Exchange Server 2013 organization that contains one Client Access server. The Client Access server is accessible from the Internet by using a network address translation (NAT) device. You deploy an additional Client Access server. You also deploy an L4 hardware load balancer between the Client Access servers and the NAT device. After deploying the hardware load balancer, you discover that all of the Exchange Server traffic is directed to a single Client Access server. You need to ensure that the hardware load balancer distributes traffic evenly across both Client Access servers. What should you do? A. Change the default route of the Client Access servers to point to the hardware load balancer. B. Configure the NAT device to pass the original source IP address of all connections from the Internet. C. Configure the Client Access servers to have a second IP address and web site. Create the Exchange virtual directories in the new sites. D. Configure SSL offloading on the hardware load balancer and the Client Access servers. Correct Answer: B : When using source NAT, the client IP address is not passed to the load balanced server. The insertion of the Client IP address into the header allows the exchange servers to see the IP that made the connection. Level 4 Load Balancer: A load balancer is a server computer with a very specialized operating system tuned to manage network traffic using user-created rules. Enterprises and hosting companies rely on load-balancing devices to distribute traffic to create highly available services L4 load balancing is fairly simple, two servers sharing the same IP address. You get redirected to the less-busy server. The most popular Layer 4 load balancing techniques are:

17 round-robin weighted round-robin least connections weighted least connections QUESTION 9 You plan to deploy an Exchange Server 2013 organization. You need to recommend a solution to ensure that a user named User1 can access messages by using Exchange ActiveSync on an Android device. The solution must prevent all other users from using Android devices to access by using Exchange ActiveSync. What should you recommend doing first? A. Run the Set-CasMailbox cmdlet. B. Create a device access rule. C. Modify the Quarantine Notification settings. D. Create a mobile device mailbox policy. Correct Answer: B : Access the Allow/Block/Quarantine rules

18 QUESTION 10 You have an Exchange Server 2013 organization that contains five servers. All users connect to their mailbox by using a mobile device. All of the users in the finance department are in an organizational unit (OU) named OU1.

19 You need to prevent the finance users from accessing the extended storage on their mobile device. What should you do? A. Create a new mobile device mailbox policy, and then run the Set-CasMailboxcmdlet. B. Create a new device access rule, and then run the Set-Mailbox cmdlet. C. Create a new mobile device mailbox policy, and then run the Set-Mailboxcmdlet. D. Create a new device access rule, and then run the Set-CasMailboxcmdlet. Correct Answer: A : Set-CASMailbox cmdlet Use the Set-CASMailbox cmdlet to set attributes related to client access for Microsoft Exchange ActiveSync, Microsoft Office Outlook Web App, POP3, and IMAP4 for a specified user. The Set-CASMailbox cmdlet operates on one mailbox at a time. You can configure properties for Outlook Web App, Exchange ActiveSync, POP3, and IMAP4 by using this cmdlet. You can configure a single property or multiple properties by using one statement. Set-Mailbox cmdlet. Use the Set-Mailbox cmdlet to modify the settings of an existing mailbox. You can use this cmdlet for one mailbox at a time. Mobile device mailbox policy In Microsoft Exchange Server 2013, you can create mobile device mailbox policies to apply a common set of policies or security settings to a collection of users. After you deploy Exchange ActiveSync in your Exchange 2013 organization, you can create new mobile device mailbox policies or modify existing policies. When you install Exchange 2013, a default mobile device mailbox policy is created. All users are automatically assigned this default mobile device mailbox policy. Device access rule Use device access rules to allow users to synchronize their mailboxes with specific mobile device families or models. QUESTION 11 You have an Exchange Server 2013 organization named for Contoso. A user named Admin1 is a member of the Domain Admins group. Admin1 fails to synchronize a new Windows Phone device by using Exchange ActiveSync and receives an HTTP 500 error message. Admin1 successfully logs on to Outlook Web App and Outlook Anywhere.

20 You need to ensure that Admin1 can synchronize the new Windows Phone device by using Exchange ActiveSync. What should you do? A. Install a trusted root certificate on the Windows Phone device. B. Create a new mobile device mailbox policy. C. Enable permission inheritance on the Admin1 user account. D. Disable permission inheritance on the Admin1 user account. Correct Answer: C : Mobile device mailbox policy In Microsoft Exchange Server 2013, you can create mobile device mailbox policies to apply a common set of policies or security settings to a collection of users. After you deploy Exchange ActiveSync in your Exchange 2013 organization, you can create new mobile device mailbox policies or modify existing policies. When you install Exchange 2013, a default mobile device mailbox policy is created. All users are automatically assigned this default mobile device mailbox policy. QUESTION 12 You have an Exchange Server 2013 organization that contains a server named EX1. Your network contains a non-critical internal application that regularly connects to the POP3 Service on EX1. Users report that Outlook Web App performs more slowly than usual. You discover that EX1 frequently has a CPU utilization that is greater than 85 percent. You need to configure EX1 temporarily to allocate more processor resources to Outlook Web App and to allocate less processor resources to POP3. Which two new policies should you create? (Each correct answer presents part of the solution. Choose two.) A. a throttling policy that sets OWAMaxConcurrency to 25 B. a workload policy for POP3 that sets the WorkloadClassification to Discretionary

21 C. a workload policy for Outlook Web App that sets the WorkloadClassification to Discretionary D. a throttling policy that sets PopMaxConcurrency to 25 E. a workload policy for POP3 that sets the WorkloadClassification to CustomerExpectation F. a workload policy for Outlook Web App that sets the WorkloadClassification to CustomerExpectation Correct Answer: BF : A workload policy: An Exchange workload is an Exchange Server feature, protocol, or service that s been explicitly defined for the purposes of Exchange system resource management. Each Exchange workload consumes system resources such as CPU, mailbox database operations, or Active Directory requests to run user requests or background work. Examples of Exchange workloads include Outlook Web App, Exchange ActiveSync, mailbox migration, and mailbox assistants. There are two ways to manage Exchange workloads: by monitoring the health of system resources or by controlling how resources are consumed by individual users (sometimes called user throttling in Exchange 2010). Managing workloads based on the health of system resources is new in Microsoft Exchange Server Controlling how resources are consumed by individual users was possible in Exchange Server 2010, and this capability has been expanded for Exchange Server You can customize the workload management settings if you want to change the default behavior of the feature for the needs of your environment. Workload classifications: Each Exchange workload (for example, the Calendar Synchronization Assistant workload), is assigned a classification. Workload policy settings are used to group each workload into a class. Classification is used to control both priority and target resource usage. Discretionary classification: Workloads in a higher classification group are given preference as resource health shows signs of degrading. B: Need to allocate less priority to POP3 F: Outlook Web App is allocated the appropriate amount of resources with a WorkloadClassification of CustomerExpectation.

22 QUESTION 13 HOTSPOT Your company has an Exchange Server 2013 organization. The company hires 200 temporary employees. You create a mailbox for each temporary employee. You create a new management role named CustomBaseOptions that uses MyBaseOptions as a parent. You create a new management role named CustomContactInfo that uses MyContactInfo as a parent. You plan to apply the new management roles to the temporary employees. You need to identify which management roles must be modified to prevent the temporary employees from performing the following task: Adding a user photo Viewing delivery reports Viewing the Install Apps feature Changing the value of the office location Which management roles should you identify? To answer, select the appropriate management role for each task in the answer area. Hot Area:

23 Correct Answer:

24 : View and modify the basic configuration of their own mailbox and associated settings. VIEWING DELIVERY REPORTS MyBaseOptions includes the following delivery reports information: Delivery Success Delivery Failure submission from the senders mailbox Message was read etc... VIEWING THE INSTALL APPS FEATURE MyBaseOptions

25 View and modify the basic configuration of their own mailbox and associated settings. CHANGING THE VALUE OF THE OFFICE LOCATION The MyContactInformation management role enables individual users to modify their contact information, including address and phone numbers. References: Understanding Management Roles: Exchange 2013 Help QUESTION 14 HOTSPOT Your company has two offices. The offices are configured as shown in the following table. The offices connect to each other by using a WAN link that has a latency of more than 700 ms. You plan to deploy an Exchange Server 2013 organization to meet the following requirements: Ensure that users can access their mailbox if the WAN link fails. Ensure that users can access their mailbox if a single server fails. Ensure that users can access their mailbox if a single database fails. You recommend deploying one or more database availability groups (DAGs) and mailbox database copies. You need to identify which design meets the requirements for the planned deployment. Which design should you identify? To answer, select the appropriate design in the answer area. Hot Area:

26 Correct Answer:

27 : File Share Witness The file share witness is used to establish a majority node set. This is done by create a share on a server that gets a little file place into it automatically. The server hosting the cluster resource (which in the DAG I think is the Primary Activation Manager server) keeps an open file lock on this file. The other servers see this open file lock and interpret this as meaning another cluster node is online, healthy, and available.

28 A file share witness is used when the DAG contains an even number of servers within it. When you initially create the DAG you must specify the server and file location that will act as the file share witness regardless of how many servers are in the DAG (0 to start) to ensure that if you do add an even number of DAG members the FSW will be properly used. Database Availability Group A database availability group (DAG) is a set of up to 16 Microsoft Exchange Server 2013 Mailbox servers that provide automatic database-level recovery from a database, server, or network failure. When a Mailbox server is added to a DAG, it works with the other servers in the DAG to provide automatic, database-level recovery from database, server, and network failures. DAGs use continuous replication and a subset of Windows failover clustering technologies to provide high availability and site resilience. Mailbox servers in a DAG monitor each other for failures. When a Mailbox server is added to a DAG, it works with the other servers in the DAG to provide automatic, database-level recovery from database failures. When you create a DAG, it's initially empty, and a directory object is created in Active Directory that represents the DAG. The directory object is used to store relevant information about the DAG, such as server membership information. When you add the first server to a DAG, a failover cluster is automatically created for the DAG. In addition, the infrastructure that monitors the servers for network or server failures is initiated. The failover cluster heartbeat mechanism and cluster database are then used to track and manage information about the DAG that can change quickly, such as database mount status, replication status, and last mounted location. Witness server and witness directory The witness server is a server outside the DAG that acts as a quorum voter when the DAG contains an even number of members. The witness directory is a directory created and shared on the witness server for use by the system in maintaining a quorum. Lagged copy of a mailbox database A Lagged Mailbox Database Copy is a mailbox database copy configured with a replay lag time value greater than 0. A lagged database copy is one that is not updated by replaying transactions as they become available. Instead, the transaction logs are kept for a certain period and are then replayed. The lagged database copy is therefore maintained at a certain remove to the active database and the other non-lagged database copies. If you are planning to have more than two passive database copies of a database, think about a lagged copy also as an additional protection against unpredicted situations Lagged copies aren't considered highly available copies. Instead, they are designed for disaster recovery purposes, to protect against store logical corruption. The greater the replay lag time set, the longer the database recovery process. Depending on the number of log files that need to replayed during recovery, and the speed at which your hardware can replay them, it may take several hours or more to recover a database. References: QUESTION 15 DRAG DROP Your company plans to deploy an Exchange Server 2013 organization. The network contains an Active Directory forest. The forest contains two domains named contoso.com and child.contoso.com. The forest contains one Active

29 Directory site. To contoso.com, you plan to deploy two servers that have Exchange Server 2013 installed. To child.contoso.com, you plan to deploy two servers that have Exchange Server 2013 installed. To the contoso.com domain, you deploy a new member server named Server1 that runs Windows Server You need to prepare the forest for the planned deployment of Exchange Server Which three commands should you run from Server1? To answer, move the three appropriate commands from the list of commands to the answer area and arrange them in the correct order. Select and Place: Correct Answer:

30 : Before you install Microsoft Exchange Server 2013 on any servers in your organization, you must prepare Active Directory and domains. To prepare Active Directory and domains From a Command Prompt window, run the following command.setup /PrepareSchemaorsetup /ps From a Command Prompt window, run the following command.setup /PrepareAD [/OrganizationName:<organization name>]orsetup /p [/on:<organization name>] From a Command Prompt window, run one of the following commands: - Runsetup /PrepareDomainorsetup /pdto prepare the local domain. You don't need to run this in the domain where you ran Step 2. Runningsetup /- - - PrepareADprepares the local domain. - Runsetup /PrepareDomain:<FQDN of domain you want to prepare>to prepare a specific domain. - Runsetup /PrepareAllDomainsorsetup /pad to prepare all domains in your organization. References: QUESTION 16 You have an Exchange Server 2013 organization.

31 You need to ensure that an administrator named Admin1 receives a daily message that contains a log of all the Exchange Server administrative actions. Which cmdlet should you use in a scheduled task? A. Set-AdminAuditLogConfig B. Write-AdminAuditLog C. New-AdminAuditLogSearch D. Search-AdminAuditLog Correct Answer: C : New-AdminAuditLogSearch: Exchange 2013 Help QUESTION 17 Refer to the Exhibit. You create a mailbox named ConfRoom1 as shown in the exhibit. (Click the Exhibit button.)

32 Users report that when they schedule meetings and attempt to locate ConfRoom1 in the All Rooms address list, they do not see ConfRoom1 on the list. You need to ensure that the users can locate ConfRoom1 on the All Rooms address list.

33 What should you do? A. Run the Set-Mailbox command and specify the Type parameter. B. Modify the offline address book (OAB) generation schedule. C. Run the New-AddressList command and specify the RecipientFilter parameter. D. Run the New-Address list. Correct Answer: A References: QUESTION 18 DRAG DROP Your network contains four servers. The servers are configured as shown in the following table. You create a new user account for a temporary user named User1. You plan to create a new mailbox for User1.

34 You need to recommend which actions must be performed to ensure that User1 can modify only the values of his home phone number attribute and his office location attribute. In which order should you perform the actions? To answer, move all actions from the list of actions to the answer area and arrange them in the correct order. Select and Place: Correct Answer:

35 : CONSENSUS OF AGREEMENT WITH THE ORDER OF: Run the New-ManagementRole Parent MyContactInformation -Name Role1 Run the Remove-ManagementRoleEntry Role1 Set-User command Run the Add-ManagementRoleEntry Role1Set-User-Parameters Office, Homephone Run the New-RoleAssignmentPolicy -Name Policy1-Roles MyBaseOptions, Role1, MyVoic , MyTextMessages, MyTeamMailboxes, MyMarketPlaceApps, MyDistributionGroupMembership

36 Run the New-Mailbox cmdlet First or last place QUESTION 19 DRAG DROP Your network contains an internal network and a perimeter network. You have an Exchange Server 2010 organization that contains an Edge Transport server named EX3. You plan to upgrade the organization to Exchange Server You plan to replace EX3 and its functionalities with a new server named EX6 that has Exchange Server 2013 installed. EX6 will be used to send all messages to and receive all messages from the Internet and to filter spam. You need to recommend which steps are required to install EX6. EX6 must have the least number of Exchange Server roles installed. Which three actions should you recommend performing on EX6 in sequence? (To answer, move the appropriate three actions from the list of actions to the answer area and arrange them in the correct order.) Select and Place:

37 Correct Answer:

38 : Step 1: You must install the Mailbox role and onto that role you install the Antispam Agents. Step 2: Run the following command to install the Anti-Spam Agents and $env:exchangeinstallpath\scripts\install-antispamagents.ps1 Step 3: Run the Restart-Service MSExchange Transport command Need to run this command Once the Install-AntiSpamAgents.ps1 script has run, if the anti-spam agents were successfully installed then exchange will ask you to restart the Microsoft

39 Exchange Transport service. Use the Restart-Service MSExchange Transport command to do this. QUESTION 20 HOTSPOT You have an Exchange Server 2013 organization that contains three servers. The servers are configured as shown in the following table. All of the servers are part of a database availability group (DAG) named DAG1. The databases are configured as shown in the following table. All of the databases replicate between all the members of DAG1. You plan to move all mailboxes from DB1 to DB2. You need to ensure that the passive copies of DB1 are in a healthy state before you move the mailboxes. Which command should you run? (To answer, select the appropriate options in the dialog box in the answer area.) Hot Area:

40 Correct Answer: : SECTION1 Set-MailboxServer Use the Set-MailboxServer cmdlet to modify attributes on a computer running Microsoft Exchange with the Mailbox server role installed. Not required in this scenario. Set-MailboxDatabase Use the Set-MailboxDatabase cmdlet to configure a variety of properties for a mailbox database. Set-DatabaseAvailabilityGroup

41 Use the Set-DatabaseAvailabilityGroup cmdlet to configure some of the properties of a database availability group (DAG). The Set-DatabaseAvailabilityGroup cmdlet enables you to manage DAG properties that can't be managed from the Exchange Management Console, such as enabling and disabling cross-site RPC client access, configuring network discovery, selecting the TCP port used for replication, and enabling datacenter activation coordination (DAC) mode. SECTION2 Need to identify the name of the mailbox database. (DB1) SECTION3 The DataMoveReplicationConstraint parameter specifies the throttling behavior for high availability mailbox moves. The possible values include: None Moves shouldn't be throttled to ensure high availability. Use this setting if the database isn't part of a database availability group (DAG). SecondCopy At least one passive mailbox database copy must have the most recent changes synchronized. This is the default value. Use this setting to indicate that the database is replicated to one or more mailbox database copies. SecondDatacenter At least one passive mailbox database copy in another Active Directory site must have the most recent changes replicated. Use this setting to indicate that the database is replicated to database copies in multiple Active Directory sites. AllDatacenters At least one passive mailbox database copy in each Active Directory site must have the most recent changes replicated. Use this setting to indicate that the database is replicated to database copies in multiple Active Directory sites. AllCopies All copies of the database must have the most recent changes replicated. Use this setting to indicate that the database is replicated to one or more mailbox database copies. The database is replicated to database copies in multiple Active Directory sites so eliminate SecondCopy. Unsure of why -AllDatacenters is the final choice but there are 3 Active Directory sites in this scenario. References: QUESTION 21 DRAG DROP You have an Exchange Server 2013 organization that contains several custom RBAC management roles. You need to identify which RBAC scopes must be used to meet the following requirements: Manage only the mailboxes of the users in the sales department. Manage the properties of all the mailbox databases. Which RBAC scopes should you identify? (To answer, drag the appropriate RBAC scopes to the correct requirements. Each RBAC scope may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.) Select and Place:

42 Correct Answer: : Management role scopes enable you to define the specific scope of impact or influence of a management role when a management role assignment is created. When you apply a scope, the role assignee assigned to the role can only modify the objects contained within that scope. A role assignee can be a management role group, management role, management role assignment policy, user, or universal security group (USG)

43 Every management role, whether it's a built-in role or a custom role, has management scopes. Management scopes can be either of the following: Implicit scopes are the default scopes that apply to a management role type. Because implicit scopes are associated with a management role type, all of the parent and child management roles with the same role type also have the same implicit scopes. Implicit scopes apply to both built-in management roles and also to custom management roles. Implicit scopes defined on management roles Implicit scopes Description Organization If Organization is present in the role's recipient write scope, the role can create or modify recipient objects across the Exchange organization. If Organization is present in the role's recipient read scope, roles can view any recipient object across the Exchange organization. Explicit scopes are scopes that you set yourself to control which objects a management role can modify. Although implicit scopes are defined on a management role, explicit scopes are defined on a management role assignment. This enables the implicit scopes to be applied consistently across all management roles unless you choose to use an overriding explicit scope. For more information about management role assignments, see Understanding Management Role Assignments. Explicit scopes override the implicit write and configuration scopes of a management role. They don't override the implicit read scope of a management role. The implicit read scope continues to define what objects the management role can read. Explicit scopes are useful when the implicit write scope of a management role doesn't meet the needs of your business. You can add an explicit scope to include nearly anything you want as long as the new scope doesn't exceed the bounds of the implicit read scope. The cmdlets that are part of a management role must be able to read information about the objects or containers that contain objects for the cmdlets to create or modify objects. For example, if the implicit read scope on a management role is set to Self, you can't add an explicit write scope of Organization because the explicit write scope exceeds the bounds of the implicit read scope. The OrganizationConfig implicit scope If OrganizationConfig is present in the role's configuration write scope, the role can create or modify any server or database configuration object across the Exchange organization. If OrganizationConfig is present in the role's configuration read scope, the role can view any server or database configuration object across the Exchange organization. The Recipient filter explicit scope Recipient filter scopes use filters to target specific recipients based on recipient type or other recipient properties such as department, manager, location, and more. References: QUESTION 22 Your network contains an Active Directory forest named contoso.com. The forest contains four sites named Site1, Site2, Site3, and Site4. You have an Exchange Server 2013 organization that contains several servers in each site.

44 You need to prevent users who have mailboxes in Site2 from sending messages that are larger than 2 MB to recipients in Site3. What should you do? A. Modify the attributes of the Active Directory IP site line between Site 2 and Site 3 B. Create a custom Send connector that has all mailboxes servers from Site 2 as source servers. C. Create a custom Receive connector that has the remote IP address range of Site 2. D. Modify the attributes of the Active Directory SMTP site link between Site 2 and Site 3. Correct Answer: B References: QUESTION 23 You have an Exchange Server 2013 organization that contains two Client Access servers named SERVER1 and SERVER2 and two Mailbox servers named SERVER3 and SERVER4. You have a firewall that controls all of the traffic between the internal network and the Internet. SERVER3 and SERVER4 are prevented from communicating with Internet hosts. SERVER1 and SERVER3 are in a site named Main. SERVER2 and SERVER4 are in a site named Main_2. All outbound is sent through SERVER1. Main fails. You discover that messages for the Internet are queued on SERVER4. You create a new send connector in Main_2. You discover that all of the outbound is queued on SERVER4 and is not delivered to the Internet. You verify that the client computers on the network can receive messages from the Internet successfully. You need to ensure that the messages are delivered successfully to the Internet. Which cmdlet should you run?

45 A. Set-SendConnector B. Set-TransportService C. Set-ExchangeServer D. Set-ADSite Correct Answer: A : Mailbox Server In an Exchange Server 2013 organization the Mailbox server role is responsible for sending outbound via a Send Connector. When this option is enabled outbound that is being sent via a Send Connector does not go directly out from the Mailbox server, and instead is proxied through a Client Access server in the site. There is nothing complicated going on here, the Client Access server simply acts as a proxy for the connection so that the receiving host out on the internet sees the connection as coming from the Client Access server name and IP address rather than the Mailbox server. IN THIS QUESTION THE CLIENT ACCESS SERVER (SERVER1) IS ACTING AS A PROXY SERVER FOR THE MAILBOX SERVERS. NEED TO CHANGE THE SEND CONNECTOR SETTINGS IN ORDER FOR MAIL TO FLOW OUT FROM SERVER4 TO THE INTERNET. A: Set-SendConnector Use the Set-SendConnector cmdlet to modify a Send connector. Send connectors that are created on Mailbox servers are stored in Active Directory and are available to all Mailbox servers running the Transport service in the organization. References:

46 QUESTION 24 You have an Exchange Server 2013 organization named adatum.com. The organization contains five Mailbox servers and two Client Access servers. You need to ensure that an administrator named user1 receives a daily message that contains a log of all the Exchange Server administrative actions. Which cmdlet should you use in a scheduled task? A. Search-AdminAuditLog B. Set-Mailbox C. New-AdminAuditLogSearch D. Set-ExchangeServer E. Set-AdminAuditLogConfig Correct Answer: C : C: Use the New-AdminAuditLogSearch cmdlet to search the contents of the administrator audit log and send the results to one or more mailboxes that you specify. References: QUESTION 25 You have an Exchange Server 2013 organization. You plan to deploy Exchange ActiveSync for mobile devices. Each mobile device will be authenticated by using certificates issued by an internal certification authority (CA). You need to configure the organization to authenticate the mobile devices by using the certificates. Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.) A. From Internet Information Services (IIS) Manager on each Client Access server, configure the Microsoft-Server-ActiveSync virtual directory to require client certificates. B. From Exchange Admin Center, configure the Microsoft-Server-ActiveSync virtual directory to require client certificates. C. From Internet Information Services (IIS) Manager on each Client Access server, enable Active Directory Client Certificate Authentication. D. From Internet Information Services (IIS) Manager on each Mailbox server, enable Active Directory Client Certificate Authentication. Correct Answer: BC

47 : B: After you ve installed the Exchange 2013 Client Access server, there are a variety of configuration tasks that you can perform. Although the Client Access server in Exchange 2013 doesn t handle processing for the client protocols, several settings need to be applied to the Client Access server, including virtual directory settings and certificate settings. C: Configure certificate-based authentication for Exchange ActiveSync Client Access Server Configuration To configure the Client Access server to enforce certificate based authentication: 1. Verify if Certificate Mapping Authentication is installed on the server. Right click on Computer in the start menu and choose Manage. Expand Roles and click on Web Server (IIS) Scroll down to the Role Services section. Under the Security section you should see Client Certificate Mapping Authentication installed. If you don't see Client Certificate Mapping Authentication installed, click add Role Services > (scroll) Security and select Client Certificate Mapping Authentication and then click Install. Reboot your server. References: QUESTION 26 You have an Exchange Server 2013 organization that contains two servers named EX1 and EX2. EX1 and EX2 are the members of a database availability group (DAG) named DAG1. EX1 and EX2 each contain a copy of a mailbox database named DB1. DB1 is configured to retain deleted items for 120 days. At the end of each month, the mailbox databases on EX1 are backed up to tape. The monthly backups are retained for two years. A user named User1 has a mailbox in DB1. User1 discovers that a mailbox folder that contained important messages was deleted more than six months ago. You need to recover the deleted mailbox folder without affecting any other users who have mailboxes in DB1.

48 Which three actions should you perform? (Each correct answer presents part of the solution. Choose three.) A. Run the New-MaiboxRestoreRequest cmdlet. B. Run the New-MailboxDatabase cmdlet and specify the Recovery parameter. C. Restore DB1 from the tape backup to an alternate location. D. Restore DB1 from the tape backup to the database s original location. E. Run the New-Mailbox cmdlet and specify the Recovery parameter. Correct Answer: ABC : Recovery Database A recovery database is a special kind of mailbox database that allows you to mount a restored mailbox database and extract data from the restored database as part of a recovery operation. You can use the New-MailboxRestoreRequest cmdlet to extract data from a recovery database. After extraction, the data can be exported to a folder or merged into an existing mailbox. Recovery databases enable you to recover data from a backup or copy of a database without disturbing user access to current data. A: Use the New-MailboxRestoreRequest cmdlet to restore a soft-deleted or disconnected mailbox. This cmdlet starts the process of moving content from the softdeleted mailbox, disabled mailbox, or any mailbox in a recovery database into a connected primary or archive mailbox. B: Use the New-MailboxDatabase cmdlet to create a mailbox database object in the database container in Active Directory. References: QUESTION 27 You have an Exchange Server 2010 organization. All users connect to their mailbox by using Microsoft Outlook 2013 and Outlook Web App. All client connections to Exchange Server use the name mail.contoso.com. You deploy Exchange Server 2013 to the organization, you move all of the users to Exchange Server 2013, and then you decommission all of the Exchange Server 2010 servers. The users report that when they open Outlook 2013, they receive a certificate warning message. The users do not receive a certificate error message or a certificate warning message when they open Outlook Web App. You need to prevent the certificate warning message from occurring when the users open Outlook 2013.

49 Which cmdlet should you run? A. Set-ClientAccessServer B. New-ExchangeCertficiate C. New-ClientAccessArray D. Import-ExchangeCertificate Correct Answer: A : A: Use the Set-ClientAccessServer cmdlet to set properties on specified Client Access server objects. QUESTION 28 Your network contains an Active Directory forest. The forest contains two sites named Montreal and New York. You have an Exchange Server 2013 organization that contains a Mailbox server and a Client Access server in each site. The users in the New York site report that the offline address book (OAB) is not updated after an extended WAN outage between the sites. The Montreal site contains the OAB generation server. You need to ensure that the New York site users download the OAB from a server in the New York site. Which two cmdlets should you run? (Each correct answer presents part of the solution. Choose two.) A. Set-Mailbox B. New-OfflineAddressBook C. New-Mailbox D. New-OabVirtualDirectory E. Set-OfflineAddressBook Correct Answer: AC

50 : Creating a new Organization Mailbox is a two-step process: Step1: Create a new arbitration mailbox New-Mailbox -Arbitration -Name "OAB Seattle" -Database DB2Seattle -UserPrincipalName oabs@contoso.com DisplayName OAB Mailbox for Seattle Step2: Enable OABGen capability Set-Mailbox -Arbitration oabs -OABGen $true References: QUESTION 29 Your network contains an Active Directory forest. The forest contains one domain. The domain contains two sites and three domain controllers. The sites and domain controllers are configured as shown in the following table. The sites connect to each other by using a WAN link. You have an Exchange Server 2013 organization that contains two servers in the Main Office site. In Branch1, you plan to deploy one server to the Exchange Server 2013 organization. You need to ensure that all of the Exchange Server services in Branch1 are available if the WAN link fails after the planned deployment. What should you do? A. Create a site link bridge, and then configure Branch1 as a hub site. B. Replace the domain controller in Branch1 with an RODC that runs Windows Server C. Replace the domain controller in Branch1 with a writable domain controller that runs a Server Core installation of Windows Server D. Create an additional site link, and then configure Branch1 as a hub site.

51 Correct Answer: C : Site link bridge A site link bridge connects two or more site links and enables transitivity between site links. Each site link in a bridge must have a site in common with another site link in the bridge. The Knowledge Consistency Checker (KCC) uses the information on each site link to compute the cost of replication between sites in one site link and sites in the other site links of the bridge. Without the presence of a common site between site links, the KCC also cannot establish direct connections between domain controllers in the sites that are connected by the same site link bridge. By default, all site links are transitive. Hub Site A hub site is based on having large numbers of outgoing links C: If you want to install or operate any Exchange 2013 server in a site, you must have a writable global catalog in the same AD site. The Global Catalog is the central repository of information about objects in a tree or forest but with a limited number of each objects attribute. The domain controller that holds a copy of the Global Catalog is the Global Catalog Server. The global catalog server makes it possible to search the entire AD DS forest without referrals to the domain controller that stores the target of the search. The global catalog server is also required for searching and processing domain logons in forests where universal groups is available Be aware that no versions of Exchange Server will make use of RODC or the Global Catalog server on a RODC although Exchange will work in the presence of RODC as long as writable versions of domain controllers and GCs are available. QUESTION 30 Your company has a main office site and a disaster recovery site. The two sites connect to each other by using redundant WAN links. Each site connects directly to the Internet. Each site contains one Exchange Server 2013 server that is accessible from the Internet. The company uses the contoso.com address suffix. The DNS records that can be resolved from the Internet are configured as shown in the following table.

52 When the Internet link at the main office site fails, the company cannot receive incoming from the Internet. You need to ensure that incoming from the Internet is delivered to Server1. Incoming from the Internet must be delivered to Server2 if Server1 is unavailable. What should you create? A. A CNAME record for the name mail.contoso.com that resolves to server2.contoso.com B. An MX record that has a cost of 20 and resolves to mail.contoso.com C. An MX record that has a cost of 20 and resolves to server2.contoso.com D. An A record for the name mail.contoso.com that resolves to Correct Answer: C : CNAME record A CNAME record is an abbreviation for Canonical Name record and is a type of resource record in the Domain Name System (DNS) that specifies that the domain name is an alias of another, canonical domain name. Here "canonical" usually means: a more generally accepted or standard name. MX record A mail exchanger record (MX record) is a type of resource record in the Domain Name System that specifies a mail server responsible for accepting messages on behalf of a recipient'sdomain, and a preference value used to prioritize mail delivery if multiple mail servers are available. The set of MX records of a domain name specifies how should be routed with the Simple Mail Transfer Protocol (SMTP). A Record An A (address) record is a DNS record that can be used to point your domain name and host names to a static IP address.

53 C: Need to increase the cost associated with the MX record of Server2 so that Server1 is preferred over Server2 but Server2 will be used if Server1 is not available. There is already a CNAME (Alias) associated with mail.contoso.com which points to Server1.contoso.com QUESTION 31 You have an Exchange Server 2013 organization. You create two distribution groups named Group1 and Group2. Group1 and Group2 each contain several hundred users. Group1 contains a user named User1. You need to configure moderation for Group2. The solution must meet the following requirements: sent from the members of Group1 must NOT be moderated unless the sender is User1. All other must be moderated by a user named Admin1. Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.) A. Create a transport rule that has a condition of The recipient is Group2. Configure the transport rule to have an action of Forward the message for approval to Admin1. B. Run Set-DistributionGroup Group2 -ModeratedBy Admin1 -BypassModerationFromSendersOrMembers Group1 -ModerationEnabled $true. C. Create a transport rule that has the conditions of The sender is User1 and The recipient is Group2. Configure the transport rule to have an action of Forward the message for approval to Admin1. D. Create a transport rule that has the conditions of The sender is User1 and The recipient is Group2. Configure the transport rule to have an action of Forward the message for approval to Admin1. Correct Answer: BC : B: When you configure a recipient for moderation, all messages sent to that recipient are subject to approval by the designated moderators. Allow the members of the distribution group named Group1 to bypass moderation. Combination of this rule and option C allows for only User1 to be affected by the moderator Admin1 C: Need to create a transport rule that identifies User1. QUESTION 32 You have an Exchange Server 2013 organization that contains one server named exl.contoso.com. The server has the Mailbox server role and the Client Access server role installed.

54 You plan to configure users to work from home and to access their by using the Outlook Anywhere feature. Upon testing the planned configuration, you discover that the users can connect and synchronize from home, but they cannot execute the following tasks: Set automatic replies for Out of Office. Download changes to the offline address book. View availability data when scheduling meetings with coworkers. The users can execute these tasks when they work from the office. You need to ensure that the users can execute the tasks when they work from home. Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.) A. Install a new certificate on exl.contoso.com B. Modify the EWS virtual directory. C. Create a new Autodiscover virtual directory. D. Renew the certificate on exl.contoso.com. E. Modify the OAB virtual directory. Correct Answer: BE : EWS virtual directory (Exchange Web Services) A virtual directory is used by Internet Information Services (IIS) to allow access to a web application in Exchange 2013 Autodiscover Service, ECP, EWS, ActiveSync, OWA, OAB, PowerShell are the available virtual directories through EAC. You can manage a variety of virtual directory settings on Exchange 2013 including authentication, security, and reporting settings. I am explaining here, how you can manage the Virtual Directories through Exchange Admin Center. B: Need to modify the EWS virtual directory in order to create the external URL. E: Need to modify the OAB virtual directory to create the External URL QUESTION 33 DRAG DROP You have an Exchange Server 2013 organization named adatum.com. The organization contains a server named Server1. Server1 is a member of a Database Availability Group (DAG) named DAG1.

55 You have a user named Sales1 in the Sales department. You need to prevent Sales1 from submitting more than 75 messages per minute to the Exchange Server organization by using Microsoft Outlook. Which three commands should you run in sequence? (To answer, move the appropriate three commands from the list of commands to the answer area and arrange them in the correct order.) Select and Place:

56 Correct Answer:

57 : Set-mailbox-identity

58 Use the Set-Mailbox cmdlet to modify the settings of an existing mailbox. You can use this cmdlet for one mailbox at a time. To perform bulk management, you can pipeline the output of various Get- cmdlets (for example, the Get-Mailbox or Get-User cmdlets) and configure several mailboxes in a single-line command. You can also use the Set-Mailbox cmdlet in scripts. You must specify either an integer or unlimited. If you set this attribute on a mailbox, that mailbox setting overrides the value set for this attribute in the Transport service. The ThrottlingPolicy parameter specifies the identity of the throttling policy for this mailbox. New-throttlingpolicy limits Use the New-ThrottlingPolicy cmdlet to create a non-default user throttling policy. The RecipientRateLimit parameter specifies the limits on the number of recipients that a user can address in a 24-hour period. The MessageRateLimit parameter specifies the number of messages per minute that can be submitted to transport. For messages submitted through the Mailbox server role (using Microsoft Outlook, Microsoft Office Outlook Web App, Exchange ActiveSync, or Exchange Web Services), this results in the deferral of messages until the quota for the user is available. Specifically, messages appear in the Outbox or Drafts folder for longer periods of time when users submit messages at a rate greater than the MessageRateLimit parameter. For POP or IMAP clients submitting messages directly to transport using SMTP, clients receive a transient error if they submit at a rate that exceeds the MessageRateLimit parameter. Exchange attempts to connect and send the messages at a later time. Use the Get-ThrottlingPolicy cmdlet to view the user throttling settings for one or more throttling policies. Use the Set-TransportServer cmdlet to set the transport configuration options for the Transport service on Mailbox servers or for Edge Transport servers. STEPS 1. New-throttlingpolicy limits - messageratelimit 75 Creates a new throttling policy called limits with a limit of 75 messages per minute being sent to the exchange server 2. $b = get-throttlingpolicy limits Establishes a variable $b with the attributes of the new throttling policy called limits 3. Set-mailbox -identity sales1 - throttlingpolicy $b Attaches the throttling policy named limits to the user named Sales1 References: QUESTION 34 DRAG DROP You have an Exchange Server organization that contains three servers. The servers are configured as shown in the following table.

59 You need to create a new database availability group (DAG) that contains EX1 and EX2. Which three actions should you perform in sequence? (To answer, move the appropriate three actions from the list of actions to the answer area and arrange them in the correct order.) Select and Place:

60 Correct Answer:

61 : QUESTION 35 You have an Exchange Server 2013 organization that contains two Mailbox servers named MBX1 and MBX2.

62 You create a database availability group (DAG) named DAG1. DAG1 is configured as shown in the exhibit. (Click the Exhibit button.) You need to ensure that replication only occurs over the replication network. Which two commands should you run? (Each correct answer presents part of the solution. Choose two.) A. Set-DatabaseAvailabilityGroupNetwork ReplicationDagNetwork01 ReplicationEnabled $true B. Set-DatabaseAvailabilityGroupNetworkMapiDagNetwork ReplicationEnabled $false C. Set-DatabaseAvailabilityGroup Dag1 ManualDagNetworkConfiguration $true

63 D. Set-DatabaseAvailabilityGroup Dag1 ManualDagNetworkConfiguration $false Correct Answer: BC : You need to ensure that replication only occurs over the replication network. If you would like to 'force' replication to only go over the Replication Network, then you definately would like to disable replication on the MAPI Network, but IF the NIC on the Replication Network goes down, it will start replicating over the MAPI NIC. There is no way of blocking that behaviour and isn't what you'd want anyway since DAGs actually cope quite fine with just 1 NIC. DAG Networks Each database availability group (DAG) network has several properties that you can configure, including the name of the DAG network, a description field for the DAG network, a list of subnets that are used by the DAG network, and whether the DAG network is enabled for replication. You can configure a DAG network only when automatic network configuration has been disabled for a DAG. There are specific networking requirements that must be met for each DAG and for each DAG member. Each DAG must have a single MAPI network, which is used by a DAG member to communicate with other servers (for example, other Exchange 2013 servers or directory servers), and zero or more Replication networks, which are networks dedicated to log shipping and seeding. MAPI MAPI stands for Messaging Application Programming Interface, and it gives programs the ability to send using your program to do the actual sending. Set-DatabaseAvailabilityGroup The Set-DatabaseAvailabilityGroup cmdlet enables you to manage DAG properties that can't be managed from the Exchange Administration Center (EAC), such as configuring network discovery, selecting the TCP port used for replication, and enabling datacenter activation coordination (DAC) mode. Set-DatabaseAvailabilityGroupNetwork Use the Set-DatabaseAvailabilityGroupNetwork cmdlet to configure a network for a database availability group (DAG). You can configure a variety of network properties, such as the name for the network, a description of the network, a list of one or more subnets that comprise the network, and whether the network is enabled for replication (log shipping and seeding). You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. B: Disables replication over the MAPI network as required in this scenario

64 C: Ensures that you can configure a DAG network by turning the automatic configuration off. The ManualDagNetworkConfiguration parameter Specifies whether DAG networks should be automatically configured. If this parameter is set to False, DAG networks are automatically configured. If this parameter is set to True, you must manually configure DAG networks. References: QUESTION 36 You have an Exchange Server 2013 organization that contains a server named Server1. Server1 has an IP address of and is configured to use a default gateway of You deploy a hardware load balancer that is configured to use the IP addresses of and A user named User1 has a client computer that has an IP address of User1 reports that he cannot view his mailbox by using Outlook Web App. When you review the IIS logs on Server1, you discover the following information: #Fields: date time cs-method cs-uri-stem s-port c-ipcs(referer) sc-status :08:55 POST /owa/ev.owa owa/ 200 You need to ensure that User1 can access his mailbox successfully from Outlook Web App. What are two possible ways to achieve this goal? (Each correct answer presents a complete solution. Choose two.) A. Configure the hardware load balancer to use the same certificate as the certificate used on Server1. B. Configure the hardware load balancer to use source NAT (SNAT). C. Configure the computer of User1 to ignore response headers. D. Modify the default gateway of Server1. Correct Answer: BD : B: Configuring the hardware load balancer to use source NAT (SNAT) will resolve the problem. D: Changing the default gateway of Server1 to that of the hardware load balancer will ensure that the connection to Server1 will be returned via the network load balancer and out to User1

65 QUESTION 37 You have an Exchange Server 2013 organization that is configured to filter messages for spam and malware. You need to modify the schedule for applying updates to the anti-spam and the antimalware definitions. Which command should you run? A. Update-MalwareFilteringServer.ps1 B. Set-MalwareFilteringServer C. Set-SenderFilterConfig D. Update-SafeList Correct Answer: B : B: Use the Set-MalwareFilteringServer cmdlet to configure the Malware agent settings in the Transport service on a Mailbox server. Incorrect Answers: A: Microsoft Exchange Server 2013 administrators can manually download anti-malware engine and definition (signature) updates. Update-MalwareFilteringServer.ps1 used in manual updates not schedule updates. C: Not used for spam and malware updates. Use the Set-SenderFilterConfig cmdlet to modify the Sender Filter agent configuration. D: Use the Update-SafeList cmdlet to update the safelist aggregation data in Active Directory. Safelist aggregation data is used in the built-in anti-spam filtering in Microsoft Exchange. EdgeSync replicates safelist aggregation data to Edge Transport servers in the perimeter network. References:

66 QUESTION 38 HOTSPOT Your network contains an Active Directory forest named contoso.com. The forest contains two sites named Site1 and Site2. You have an Exchange Server 2013 organization that contains two servers. The servers are configured as shown in the following table. An administrator creates a new Active Directory site named Site3. The administrator creates mailboxes for the users in Site3. All of the mailboxes of the Site3 users are located on EX1. Site3 contains a domain controller named dc3.contoso.com. The Site3 users report that sometimes, when they open Microsoft Outlook, it takes a long time to access their mailbox. You need to reduce the amount of time it takes for the users to access their mailbox. Which command should you run? (To answer, select the appropriate options in the dialog box in the answer area.) Hot Area: Correct Answer:

67 : SECTION1 Set-ClientAccessServer EX: Use the Set-ClientAccessServer cmdlet to set properties on specified Client Access server objects. Use the Set-ClientAccessServer cmdlet to change AutoDiscover settings. References: QUESTION 39 DRAG DROP You deploy an Active Directory forest that contains two domains named contoso.com and child.contoso.com. You plan to deploy Exchange Server 2013 servers to the child.contoso.com domain. You need to prepare Active Directory for the installation of the first Exchange Server 2013 servers. Which command should you run in each domain? (To answer, drag the appropriate commands to the correct domains. Each command may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.) Select and Place:

68 Correct Answer: : THE SUPPLIED ANSWER IS CORRECT. FOR 3 STEPS USE 1. SETUP/PREPARESCHEMA 2. SETUP/PREPAREAD 3. SETUP /PREPAREDOMAIN However, the answer only provides for 2 steps. If you run setup /preparead then this command checks to see if the schema extensions have been installed and if not, then it proceeds to install them. Hence setup /preparead is correct, a trick question from Microsoft to check if you know how setup /preparead actually operates. References

69 &source=bl&ots=9OBBo0R2H9&sig=iu1yUeD2ckRsBryxGHi6MTs8Bk&hl=en&sa=X&ei=YPP- UfblDqauiQezrYCoCw&ved=0CG8Q6AEwBw#v=onepage&q=prepare%20child%20domains%20for%20exchange%202013&f=false Prepare Active Directory and Domains: Exchange 2013 Help QUESTION 40 You have an Exchange Server 2013 organization. Your company has a Service Level Agreement (SLA) stating that you must be able to reconnect disconnected mailboxes to user accounts for up to 365 days. After 365 days, disconnected mailboxes must be deleted permanently. You need to recommend a solution to meet the SLA. What should you include in the recommendation? A. Create a retention policy and apply the policy to all mailboxes. B. Configure the deleted mailbox retention setting for all databases. C. Configure the deleted item retention setting for all databases. D. Implement a database availability group (DAG) that contains a lagged copy. Correct Answer: B : B: Disabled and deleted mailboxes are retained in the mailbox database until the deleted mailbox retention period expires, which is 30 days by default. References: QUESTION 41 A user fails to connect to his mailbox by using Outlook Anywhere. The user successfully connects to the mailbox by using an Exchange ActiveSync-enabled mobile device and Outlook Web App. You need to identify what prevents the users from connecting to the mailbox by using Outlook Anywhere. Which tool should you use? A. Microsoft Outlook

70 B. Microsoft Exchange Server Deployment Assistant C. Microsoft Exchange RPC Extractor D. Microsoft Exchange Server Profile Analyzer E. Microsoft Exchange Server User Monitor F. Microsoft Exchange Load Generator G. Exchange Remote Connectivity Analyzer H. Exchange Server MAPI Editor Correct Answer: G : G: Exchange Remote Connectivity Analyzer (ExRCA The Exchange Remote Connectivity Analyzer (ExRCA) is a web-based tool designed to test connectivity with a variety of Exchange protocols. You can access the ExRCA The Microsoft Exchange Remote Connectivity Analyzer (ExRCA) can help you confirm that connectivity for your Exchange servers is configured correctly and diagnose any connectivity issues. The Remote Connectivity Analyzer website offers tests for Microsoft Exchange ActiveSync, Exchange Web Services, Microsoft Outlook, and Internet . References: QUESTION 42 DRAG DROP You have an Exchange Server 2013 organization that contains a database availability group (DAG). There are four copies of every mailbox database. One of the copies is a lagged copy configured to have a replay lag time of 14 days. All mailboxes have single item recovery enabled. All databases are configured to have a deleted item retention period of seven days. A company executive reports that an message, which was deleted 10 days ago, must be restored. You need to ensure that you can recover the message from the lagged copy of the mailbox database. The solution must preserve the lagged copy of the mailbox database. Which three actions should you perform?

71 To answer, move the three appropriate actions from the list of actions to the answer area and arrange them in the correct order. Select and Place: Correct Answer:

72 : vssadmin Displays current volume shadow copy backups and all installed shadow copy writers and providers in the command window. eseutil.exe The key to matching log files and databases is the signature. You can view log file signatures by using the Exchange Server Database Utilities (Eseutil.exe) tool and viewing the log file header with the command Eseutil/ml [log filename]. Suspend-MailboxDatabaseCopy Use the Suspend-MailboxDatabaseCopy cmdlet to block replication and replay activities (log copying and replay) or activation for a database configured with two or more database copies. You can suspend and resume database copy activity by using the EAC, or by running the Suspend-MailboxDatabaseCopy and Resum boxDatabaseCopy cmdlets in the Shell. References:

73 QUESTION 43 DRAG DROP Your network contains an Active Directory forest. The forest contains a single domain named fabrikam.com. You have an Exchange Server organization that contains four servers. The servers are configured as shown in the following table. You plan to enable Outlook Anywhere for all users. You plan to configure the users to connect to the name oa.fabrikam.com. The IP address of oa.fabrikam.com points to EX3. You need to ensure that users on EX2 and EX4 can access their mailbox by using Outlook Anywhere. Which command should you run on EX1 and EX3? (To answer, drag the appropriate cmdlets to the correct servers. Each cmdlet may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.) Select and Place:

74 Correct Answer: :

75 Enable-OutlookAnywhere is an Exchange 2010 command. EX1 is an exchange 2010 server Use the Enable-OutlookAnywhere cmdlet to enable Outlook Anywhere on a computer running Microsoft Exchange Server 2010 that has the Client Access server role installed. Running the Enable-OutlookAnywhere cmdlet enables the server to accept requests from Microsoft Office Outlook 2007 and Outlook 2003 client computers from the Internet by using Outlook Anywhere, also known as RPC over HTTP. Set-OutlookAnywhere is an Exchange 2010 command. Use the Set-OutlookAnywhere cmdlet to modify the properties on a computer running Microsoft Exchange Server 2013 enabled for Microsoft Outlook Anywhere. References: QUESTION 44 You have an Exchange Server 2013 organization named adatum.com. The organization contains two servers named EX1 and EX2 that are configured as shown in the table. Both servers are members of a database availability group (DAG). EX1 has the active copy of a database named Database1. Several users who have mailboxes in Database1 discover that all of their outbound messages remain in their Drafts folder when they use Outlook Web App. You need to ensure that the messages are delivered. What should you do? A. On EX2, retry the message queues. B. On EX1, start the Microsoft Exchange Mailbox Transport Submission service. C. On EX2, start the Microsoft Exchange Mailbox Transport Submission service. D. On EX1, retry the message queues. Correct Answer: B :

76 B: Resubmitting a queue is similar to retrying a queue, except the messages are sent back to the Submission queue for the categorizer to reprocess. Messages stay in the Drafts folder until they are successfully sent by being processed by the transport service If the transport service is not running on any available server or the mailbox transport service is not running on the mailbox server that hosts the active database for the user s mailbox, items will stay in the Drafts folder until the services come online and Exchange is able to process outbound items. References: QUESTION 45 Your company has four regional offices and 20 branch offices. The regional offices connect to each other by using a 30-Mbps WAN link. Each branch office connects to its nearest regional office by using a 1-Mbps WAN link. The network contains an Active Directory forest. The forest contains a domain controller in each office. Each office maps to an Active Directory site. Each branch office site connects to the nearest regional office site by using an Active Directory site link. You have an Exchange Server 2013 organization that contains one server in each office. You need to implement a messaging solution to meet the following requirements: The users in the branch offices must only be able to send messages that are up to 2 MB to the users in the other offices. The users in the regional offices must be prevented from sending messages that are larger than 5 MB to the users in any of the regional offices. Which cmdlet should you run? A. Set-TransportRule B. Set-ADSite C. Set-AdSiteLink D. Set-RoutingGroupConnector Correct Answer: C : C: The only command that deals with message size. Use the Set-AdSiteLink cmdlet to assign an Exchange-specific cost to an Active Directory IP site link. You can also use this cmdlet to configure the maximum message size that can pass across an Active Directory IP site link. References: QUESTION 46

77 You have an Exchange Server 2013 organization named for ADatum Inc. A user named User1 is a member of the Domain Admins group. User1 fails to synchronize a new Windows Phone device by using Exchange ActiveSync and receives an HTTP 500 error message. User1 successfully logs on to Outlook Web App and Outlook Anywhere. You need to ensure that User1 can synchronize the new Windows Phone device by using Exchange ActiveSync. Which two tasks should you perform? (Each correct answer presents a complete solution. Choose two.) A. Disable permission inheritance on the User1 user account. B. Enable permission inheritance on the User1 user account. C. Install a trusted root certificate on the Windows Phone device. D. Create a new mobile device mailbox policy. E. Modify the Exchange ActiveSync policy that applies to User1 s mailbox. Correct Answer: BE : HTTP 500 ERROR MESSAGE The Web server (running the Web Site) encountered an unexpected condition that prevented it from fulfilling the request by the client (e.g. your Web browser or our CheckUpDown robot) for access to the requested URL. B: Simply check include inheritable permissions from this object's parent. E: It appears that Exchange ActiveSync for User 1's mailbox may not be enabled. Use the EAC to enable or disable Exchange ActiveSync. QUESTION 47 Your company, Fabrikam Inc., has an Exchange Server 2013 organization. The organization that contains three servers named Server1, Server2, and Server3. Server1 and Server2 are members of a database availability group (DAG) named DAG1. DAG1 contains two mailbox databases. All databases are active on Server1 and replicate to Server2. You start an unplanned maintenance on Server1 and shut down Server1. You discover that the databases do not mount on Server2. You restart Server1 and the databases mount automatically on Server1. You need to identify what prevents the databases from switching over successfully to Server2. Which cmdlet should you run?

78 A. Test-ReplicationHealth B. Test-OutlookConnectivity C. Test-ServiceHealth D. Get-AvailabilityReportOutage Correct Answer: A : The cmdlet is designed for the proactive monitoring of continuous replication and the continuous replication pipeline, the availability of Active Manager, and the health and status of the underlying cluster service, quorum, and network components. The Test-ReplicationHealth cmdlet can be run locally or remotely against any Mailbox server in a DAG. References: QUESTION 48 You have an Exchange Server 2010 organization named adatum.com. You deploy a server that has Exchange Server 2013 installed. You plan to install eight additional servers that have exchange Server 2013 installed. You are a member of the Organization Management role group. You hire a temporary Exchange administrator named Temp1. The company s security policy states that all external consultants must have the minimum number of required permissions on the network. You need to ensure that Temp1 can install a server named Server5. The solution must meet the requirements of the security policy. Which two tasks should you perform? (Each correct answer presents part of the solution. Choose two.) A. Run setup and specify the /newprovisionedserver:server5 parameter. B. Add Temp1 to the Delegated Setup management role group. C. Add Temp1 to the Exchange Server role group. D. Create a new management role and a new role assignment policy.

79 E. Run setup and specify the /roles:temp1 parameter Correct Answer: AB : A: To delegate setup, you must first run Setup.com from a Command Prompt window with the / NewProvisionedServer parameter. This will not install Exchange on the server, but instead will create a placeholder object for the server in Active Directory and will add the machine account for this server to the Exchange Servers group. B: Need to Add Temp1 to the Delegated Setup management role group. Delegated Setup management role group The Delegated Setup management role group is one of several built-in role groups that make up the Role Based Access Control (RBAC) permissions model in Microsoft Exchange Server Role groups are assigned one or more management roles that contain the permissions required to perform a given set of tasks. The members of a role group are granted access to the management roles assigned to the role group. For more information about role groups, see Understanding Management Role Groups. Administrators who are members of the Delegated Setup role group can deploy servers running Exchange 2013 that have been previously provisioned by a member of the Organization Management role group. Members of the Delegated Setup role group can only deploy Exchange 2013 servers. They can't manage the server after it's been deployed. To manage a server after it's been deployed, a user must be a member of the Server Management role group. For more information about RBAC, see Understanding Role Based Access Control. References: QUESTION 49 DRAG DROP You have an Exchange Server 2013 organization that contains a server named Server1. A user named User1 has an administrative assistant named Assistant1. A user named User2 has an administrative assistant named Assistant2. You need to configure access to Outlook to meet the following requirements: Assistant1 must be able to send messages as a User1. Assistant2 must be able to send messages on behalf of User2.

80 Which cmdlets should you use? (To answer, drag the appropriate cmdlets to the correct requirements. Each cmdlet may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.) Select and Place: Correct Answer:

81 : Add-MailboxFolderPermission Use the Add-MailboxFolderPermission cmdlet to manage folder-level permissions for all folders within a user's mailbox. Add-ADPermission Use the Add-ADPermission cmdlet to add permissions to an Active Directory object. Use the Set-Mailbox cmdlet to modify the settings of an existing mailbox. You can use this cmdlet for one mailbox at a time. To perform bulk management, you can pipeline the output of various Get- cmdlets and configure several mailboxes in a single-line command. You can also use the Set-Mailbox cmdlet in scripts. To grant Send on Behalf permissions, you must use the Exchange Management Shell. Use the Set-Mailbox cmdlet with the GrantSendonBehalf parameter. References: QUESTION 50 HOTSPOT You have an Exchange Server 2013 organization that contains 10 mailbox servers. You have a custom workload management policy named App1Policy. App1Policy is applied to three Mailbox servers. You deploy a new Mailbox server named EX11. You need to ensure that App1Policy is applied to EX11. Which command should you run? (To answer, configure the appropriate options in the answer area.) Hot Area:

82 Correct Answer: : An Exchange workload is an Exchange Server feature, protocol, or service that s been explicitly defined for the purposes of Exchange system resource management. Each Exchange workload consumes system resources such as CPU, mailbox database operations, or Active Directory requests to run user requests or background work. Examples of Exchange workloads include Outlook Web App, Exchange ActiveSync, mailbox migration, and mailbox assistants. There are two ways to manage Exchange workloads: by monitoring the health of system resources or by controlling how resources are consumed by individual users (sometimes called user throttling in Exchange 2010). Managing workloads based on the health of system resources is new in Microsoft Exchange Server Controlling how resources are consumed by individual users was possible in Exchange Server 2010, and this capability has been expanded for Exchange Server You can customize the workload management settings if you want to change the default behavior of the feature for the needs of your environment. SECTION1 Use the Set-ExchangeServer cmdlet to set Exchange attributes in Active Directory for a specified server. References: QUESTION 51 HOTSPOT You have an Exchange Server 2013 organization that contains two distribution groups named Group1 and Group2.

83 You need to prevent the members of Group1 and Group2 from communicating with each other by using , unless the messages contain the string Press Release in the subject. Users whose messages are rejected must receive a non-delivery report (NDR) that contains a status code of Which command should you run? (To answer, configure the appropriate options in the answer area.) Hot Area: Correct Answer: : Box 1: Use thenew-transportrulecmdlet to create a transport rule in your organization. Box 2: TheSmtpRejectMessageRejectTextparameter specifies a text string to add to the rejection message. You must use this parameter with thesmtprejectmessagerejectstatuscodeparameter. Incorrect: Box 1: Use thenew-dlppolicycmdlet to create data loss prevention (DLP) policies in your Exchange organization. No parameter -ClassificationID.

84 Box 2: Should be RejectMessageEnhancedStatusCode TheRejectMessageEnhancedStatusCodeparameter specifies an enhanced status code to provide when rejecting messages. Valid values are or between and References: QUESTION 52 Your company has a main office and a branch office. You have an Exchange Server 2013 organization. The company recently built a new meeting room in the branch office. You need to ensure that the meeting room is available by using the Room Finder feature in Microsoft Outlook. Which cmdlet should you run? A. Set-MailboxCalendarConfiguration B. New-Mailbox C. Set-CalendarProcessing D. New Remot box Correct Answer: B : B: Create a new Room Mailbox to schedule meetings in conference rooms, auditoriums, labs or other facilities Create new Room Mailbox References: QUESTION 53 HOTSPOT You are planning to implement several servers on virtual machines. The servers have Exchange Server 2013 installed. The planned implementation must meet the following requirements: Minimize the amount of overhead required for the virtualization solution. Minimize the risk of data corruption for the Exchange Server databases. You need to recommend a storage solution for the Exchange databases and a backup and recovery solution for the planned servers.

85 Which solutions should you recommend? To answer, select the appropriate solutions in the answer area. Hot Area: Correct Answer: Exchange 2013 Virtualization: Exchange 2013 Help QUESTION 54

86 Your network contains an Active Directory forest. The forest contains a single domain named contoso.com. You have an Exchange Server 2013 organization named Contoso. You plan to create an additional SMTP domain named sales.contoso.com. You will use sales.contoso.com as the primary SMTP address for the users in the sales department. You create a new address policy and apply the policy to the sales users. New sales users report that when they attempt to access their from the Internet for the first time by using Microsoft Outlook 2010, they fail to connect. The sales users connect to their mailbox internally successfully by using Outlook All other users can connect to their mailbox from the Internet and internally. You need to ensure that the new sales users can connect to the Exchange Server 2013 organization by using Outlook Anywhere from the Internet. Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.) A. Modify each existing Service Connection Point (5CP) object in Active Directory to point to autodiscover.sales.contoso.com. B. From DNS Manager, create a host (A) record for autodiscover.sales.contoso.com. C. On the Client Access servers, deploy a new certificate that includes the autodiscover.sales.contoso.com name. D. Create a new Autodiscover virtual directory on the Client Access servers and configure ExternalURL to use autodiscover.sales.contoso.com. E. Create a new Service Connection Point (SCP) object in Active Directory that points to autodiscover.sales.contoso.com. Correct Answer: BC : B: You will only need an autodiscover name for each SMTP domain that a user is likely to enter as their address. C: Externally connected clients are different, because they can t lookup the SCP in Active Directory from outside of the network. These clients might be roaming laptop users with Outlook, or they might be ActiveSync capable smartphones such as iphones. In either case they will attempt to connect to Autodiscover by performing a DNS lookup for autodiscover.smtpdomainname. References: QUESTION 55 You have an Exchange Server 2013 organization named Contoso. The organization contains a server named Server1 that has Exchange Server 2013 installed. Server1 has the Mailbox server role and the Client Access server role installed. Server1 has a Send connector for a partner company. The Send connector is configured for Domain Security with a domain named adatum.com.

87 The only certificate installed on Server1 expires. You discover that all messages sent to adatum.com remain in the queue on Server1. On Server1, you install a new certificate from a trusted third-party. You need to ensure that the messages are delivered to adatum.com. What should you do? A. Assign the new certificate to the IIS service. B. Send the new certificate to the administrator at adatum.com. C. Assign the new certificate to the SMTP service. D. Create a new send connector that contains an address space to adatum.com. Correct Answer: C : C: The Enable-ExchangeCertificate cmdlet enables certificates when it updates the metadata that is stored with the certificate. To enable an existing certificate to work with different services, run the Enable-ExchangeCertificate command and specify the services that you want to enable. You can rerun this cmdlet if you want to add new services that use the certificate. When you enable a certificate for the Simple Mail Transfer Protocol (SMTP) service and the certificate contains a FQDN that matches the FQDN of the local computer, the certificate may be published to the Active Directory directory service. References: QUESTION 56 Your network contains an Active Directory forest named contoso.com. The forest contains an enterprise root certification authority (CA) named CA1. The network contains a server named EX1 that has Exchange Server 2013 installed. A partner company named ADatum Corporation has an Active Directory domain named adatum.com. The domain contains a server named EX5 that has Exchange Server 2010 Service Pack 2 (SP2) installed. EX5 has a Receive connector that is configured for mutual TLS. Users in contoso.com plan to send messages that contain sensitive data to users in adatum.com. You need to ensure that all of the messages sent from contoso.com to adatum.com are encrypted by using TLS. The solution must ensure that EX1 and EX5

88 validate server certificates. Which three actions should you perform? (Each correct answer presents part of the solution. Choose three.) A. Run the set-transportconfig -tlssenddomainsecurelist contoso.com command. B. Install a certificate, and then assign the certificate to the IIS service. Send the root certificate for contoso.com to the administrators in adatum.com. C. Run the New-SendConnector cmdlet and specify the domainsecureenabled parameter. D. Run the New-SendConnector cmdlet and specify the tlsdomainparameter. E. Run the set-transportconfig -tlssenddomainsecurelist adatum.com command. F. Install a certificate, and then assign the certificate to the SMTP service. Send the root certificate for contoso.com to the administrators in adatum.com. Correct Answer: ADF : A: Use the Set-TransportConfig cmdlet to modify the transport configuration settings for the whole Exchange organization. The TLSSendDomainSecureList parameter specifies the domains from which you want to send domain secured by using mutual TLS authentication. In this scenario we send from EX1 in the contoso.com domain. D: Need to create a new send connector. The TlsDomain parameter specifies the domain name that the Send connector uses to verify the FQDN of the target certificate when establishing a TLS secured connection. F: A new certificate is needed for the SMTP service. References: QUESTION 57 You have an Exchange Server 2013 organization that contains five servers. Your company has a finance department, a marketing department, and a research department. Users in the marketing department are prevented from creating more than two Exchange ActiveSync device associations. You have a user named User5 in the finance department. You need to prevent User5 from creating more than two Exchange ActiveSync device associations. Which cmdlet should you use?

89 A. Set-ThrottlingPolicyAssociation B. Set-ResourcePolicy C. Set-ActiveSyncMailboxPolicy D. Set-CASMailbox Correct Answer: A : Reference Set-ThrottlingPolicyAssociation: Exchange 2013 Help Set-ThrottlingPolicy: Exchange 2013 Help QUESTION 58 You have an Exchange Server organization that contains three servers that have Exchange Server 2013 installed and one server that has Exchange Server 2010 installed. You create the custom RBAC roles shown in the following table. The Seattle help desk manages all of the users in an organizational unit (OU) named Seattle. The Miami help desk manages all of the users in an OU named Miami. The IT Administrators manage all of the users in the forest. You need to recommend which commands must be run to prevent only the members of both help desks from modifying the properties of users who have a department attribute value of Manager. Which three commands should you run? (Each correct answer presents part of the solution. Choose three.) A. new-managementscope "executive users exclusive scope" -recipientrestrictionfilter { department -eq "manager" } -exclusive force B. new-managementroleassignment -name "managers" -securitygroup "managers" -role "mail recipients" -exclusiverecipientwritescope "executive users exclusive scope"

90 C. new-roleassignmentpolicy -name "limited end user policy" -roles "mypersonalinformation". D. new-rolegroup -name "managers" -roles "mail recipients" -members admins E. new-rolegroup -name "help desk" -roles "mail recipients" -members admins Correct Answer: ABD : A: Use the New-ManagementScope cmdlet to create a regular or exclusive management scope. After you create a regular or exclusive scope, you need to associate the scope with a management role assignment. To associate a scope with a role assignment, use the New-ManagementRoleAssignmentcmdlet. B: Use the New-ManagementRoleAssignment cmdlet to assign a management role to a management role group, management role assignment policy, user, or universal security group (USG). QUESTION 59 You have an Exchange Server 2007 organization. You recently deployed a server that has Exchange Server 2013 installed. The Exchange Server organization contains three servers. The servers are configured as shown in the following table. Server2 contains a mailbox for a user named User1. You move the mailbox of User1 to Server3. After the move, User1 fails to access his mailbox by using Outlook Web App. Users who have mailboxes on Server1 and Server2 can access their mailboxes by using Outlook Web Access.

91 You need to ensure that User1 can access his mailbox from the Internet by using Outlook Web App at The solution must ensure that users who have mailboxes on Server1 and Server2 can continue to use Outlook Web Access. Which three actions should you perform? (Each correct answer presents part of the solution. Choose three.) A. Export the certificate on Server1 and import the certificate to Server 3. B. On all of the Exchange servers, install a new certificate that contains the mail.contoso.com and legacy.contoso.com names. C. Redirect all of the traffic from the Internet for mail.contoso.com to Server3. D. On all of the Exchange servers, install a new certificate that contains the Server1.contoso.com, server2.contoso.com, server3.contoso.com, and legacy.contoso.com names. E. Create a host (A) record named legacy.contoso.com that points to Server1. Correct Answer: ABE : References: QUESTION 60 You host Exchange Server 2013 organizations for several hundred tenants. The infrastructure contains several custom transport agents. You need to prevent the transport agents from overloading the processors on one of the Exchange servers. Which cmdlet should you run? A. Set-WorkloadPolicy B. Set-ResourcePolicy C. Set-TransportAgent D. Set-ThrottlingPolicy Correct Answer: A

92 : QUESTION 61 DRAG DROP You have an Exchange Server 2013 organization that contains a server named EX1. You have a user named User1 in the marketing department. You need to prevent User1 from submitting more than 50 messages per minute to the Exchange Server organization by using Microsoft Outlook. Which three commands should you run? To answer, move the three appropriate commands from the list of commands to the answer area and arrange them in the correct order. Select and Place:

93 Correct Answer:

94 : Box 1: Use the New-ThrottlingPolicy cmdlet to create a non-default user throttling policy. The MessageRateLimit parameter specifies the number of messages per minute that can be submitted to transport.

95 Box 3: Use theset-mailboxcmdlet to modify the settings of an existing mailbox. You can use this cmdlet for one mailbox at a time./ parameter: ThrottlingPolicy.Microsoft.Exchange.Configuration.Tasks.ThrottlingPolicyIdParameter References: QUESTION 62 DRAG DROP You have an Exchange Server 2013 organization that contains four servers named EX1, EX2, EX3, and EX4. All of the servers are members of a database availability group (DAG) named DAG1. Each server has a copy of a mailbox database named DB1. DB1 has the following characteristics: The replay lag time on Ex4 is set to 14 days. Single item recovery on all of the servers is set to 14 days. None of the servers have Volume Shadow Copy Service (VSS) backups. Ex4 has a folder named F:\RDB that is used to store database files during restore operations. Twenty days ago, a user named User1 deleted an message that had a subject of "Sales Report". You need to restore the deleted message to the mailbox of User1. You copy the lagged database and the log files that are older than 20 days to F:\RDB. Which three actions should you perform? To answer, move the three appropriate actions from the list of actions to the answer area and arrange them in the correct order. Select and Place:

96 Correct Answer:

97 : Box 1:You can use the Shell to create a recovery database, a special kind of mailbox database that's used to mount and extract data from the restored database as part of a recovery operation. After you create a recovery database, you can move a recovered or restored mailbox database into the recovery database, and then use the New-MailboxRestoreRequest cmdlet to extract data from the recovered database. After extraction, the data can then be exported to a folder or merged into an existing mailbox. Using recovery databases, you can recover data from a backup or copy of a database without disrupting user access to current data.

98 Box 2: The database must be in a clean shutdown state. Because an RDB is an alternate restore location for all databases, all restored databases will be in a dirty shutdown state. You can use Eseutil /Rto put the database in a clean shutdown state. Box 3: A recovery database (RDB) is a special kind of mailbox database that allows you to mount a restored mailbox database and extract data from the restored database as part of a recovery operation. After you've created an RDB, you can restore a mailbox database into the RDB by using your backup application (or if you have the database and its log files in the file system, by copying them to the RDB file structure). Then you can use the New-MailboxRestoreRequestcmdlet to extract data from the recovered database. After being extracted, the data can then be exported to a folder or merged into an existing mailbox. RDBs allow you to recover data from a backup or copy of a database without disrupting user access to current data. References: QUESTION 63 You have an Exchange Server 2013 organization that contains two servers named EX1 and EX2. EX1 and EX2 are members of a database availability group (DAG) named DAG1. DAG1 contains four mailbox databases. All databases are active on EX1 and replicate to EX2. You start an unplanned maintenance on EX1 and shut down EX1. You discover that the databases do not mount on EX2. You restart EX1 and the databases mount automatically on EX1. You need to identify what prevents the databases from switching over successfully to EX2. Which cmdlet should you run? A. Test-ServiceHealth B. Test-OutlookConnectivity C. Get-AvailabilityReportOutage D. Test-ReplicationHealth Correct Answer: D

99 : References: QUESTION 64 Your company has three offices. Each office is configured as an Active Directory site. You have three servers that have Exchange Server 2013 installed named EX1, EX2 and EX3. All three servers have the Client Access server role and the Mailbox server role installed. The Active Directory site links and costs are configured as shown in the exhibit. (Click the Exhibit button.) Site B is designated as a hub site. EX2 fails. You discover that all messages sent from the users in Site A to the users in Site C are queued on a server in Site A. You need to ensure that the messages are sent to Site C as quickly as possible. What should you do first? A. Modify the Active Directory site link costs. B. Configure Site A as a hub site. C. Modify the Exchange-specific site link cost. D. Remove the hub site. Correct Answer: D

100 : QUESTION 65 Your network contains an internal network and a perimeter network. The internal network contains four offices. The perimeter network is located in a separate office. Each internal office has a direct WAN link to all other internal offices. Each of the four offices that make up the internal network is configured as an Active Directory site. The Active Directory sites and site links are configured as shown in the exhibit. (Click the Exhibit button.)

101 Your company has an Exchange Server 2013 organization. Each site contains two servers that have the Mailbox server role and the Client Access server role installed. To the perimeter network, you deploy two servers that have Exchange Server 2010 Service Pack 2 (SP2) and the Edge Transport server role installed. You configure an Edge Subscription to Site1. You deploy a new notification application to Site4. The application will send 25,000 messages daily to external recipients. You need to identify which WAN links will have increased traffic from the new application. Which WAN link or links should you identify? (Each answer presents part of the solution. Choose all that apply.) A. The WAN link between Site4 and the perimeter network B. The WAN link between Site4 and Site3 C. The WAN link between Site1 and the perimeter network D. The WAN link between Site4 and Site1 E. The WAN link between Site4 and Site2 Correct Answer: CE : C: the traffic will increase on the single WAN link on the perimeter network. E: The traffic will increase between Site4 and Site2 since the cost of this link (5) plus the cost of the link between Site2 and Site1 (1) is lower the cost on the direct link between Site4 and Site1 (10). QUESTION 66 You have network contoso.com. contoso.com consist of AD DS Domain contoso.com. All Servers running Windows Server 2012 and all Clients running Windows 8 Pro. Server1 runs Mailbox Server Role and Client Access Server Role. You are configuring Anti-Spam Filtering on Server1. You need to ensure that all s with the words Free Credit Check are rejected unless the is sent to Finance Distribution Group. You also need to ensure that all s from partner company

102 Domain name adatum.com bypass the Anti-Spam Filter. You run the Add-ContentFilterPhrase and add the words Free Credit Check What should you do next? A. Run the Set-TransportConfig and Set-ContentFilterConfig B. Run the Set-SenderReputationConfig and Set-TransportConfig C. Run the Set-ContentFilterConfig and Set-RecipientFilterConfig D. Run the Set-SenderFilterConfig and Set-RecipientFilterConfig Correct Answer: C : C: Use the Set-ContentFilterConfig cmdlet to modify the content filter configuration on a Mailbox server or an Edge Transport server. References: QUESTION 67 You are evaluating the implementation of a Database Availability Group (DAG). You need to recommend changes to the planned implementation to minimize the loss of large messages if a single DAG member fails. What should you recommend changing? A. The preference of the mail exchanger (MX) records B. The duration of single item recovery C. The intervals of shadow redundancy D. The size of the transport dumpster Correct Answer: C :

103 Shadow redundancy intervals will need to be amended. SafetyNet is a component of Shadow Redundancy. References: QUESTION 68 A user fails to connect to his mailbox by using Outlook Anywhere. The user successfully connects to the mailbox by using an Exchange ActiveSync-enabled mobile device and Outlook Web App. You need to identify what prevents the users from connecting to the mailbox by using Outlook Anywhere. Which tool should you use? A. Microsoft Outlook Connectivity Test B. Microsoft Exchange RPC Extractor C. Microsoft Exchange Server Profile Analyzer D. Exchange Server MAPI Editor Correct Answer: A : A: Test Outlook Anywhere Connectivity Applies to: Exchange Server 2013 You can test for end-to-end client Outlook Anywhere connectivity by using either the Shell or the Exchange Remote Connectivity Analyzer (ExRCA). This includes testing for connectivity through the Autodiscover service, creating a user profile, and signing in to the user s mailbox. All the required values are retrieved from the Autodiscover service. References: QUESTION 69 You need to create an exclusion for two helpdesk RBAC (Role Based Access Control) groups to not have access to managers. You will need to pick 3 PowerShell commands from the available choices A. New-ManagementRole, New-ManagementScope,Set-ManagementScope (Guessed) B. New-ManagementScope, RecipientRestrictionFilter,New-ManagementRoleAssignment (Guessed) C. New-ManagementScope, New-ManagementRoleAssignment, CustomRecipientWriteScope (Guessed)

104 D. Unsure of commands and correct answer Correct Answer: C : C: Microsoft recommends that you: define the scope, then the role, then the role group, and finally, the role assignment. Management role scopes enable you to define the specific scope of impact or influence of a management role when a management role assignment is created. When you apply a scope, the role assignee assigned to the role can only modify the objects contained within that scope. A role assignee can be a management role group, management role, management role assignment policy, user, or universal security group (USG). For more information about management roles, see Understanding Role Based Access Control. References: QUESTION 70 DRAG DROP You need to recommend a solution to deploy the Outlook app Which three actions should you recommend performing in sequence? (To answer, move the appropriate three actions from the list of actions to the answer area and arrange them in the order) (Apps for Outlook can help you personalize your messages or speed up the way you access information on the web. For example, the Bing Maps app that comes with Outlook shows an online map whenever you open a message that contains a street address. Outlook App Office Store) Select and Place:

105 Correct Answer:

106 : STEPS: 1. RUN THE $DATA=GET-CONTENT -PATH "C:\APPS\SOCIALMEDIAPP.XML" = ENCODING BYTE - READCOUNT 0 COMMAND Establishes the Data variable which defines the location of the Outlook App. 2. RUN THE NEW-APP -FILEDATA $DATA COMMAND This statement and the above statement install socialmediapp.xml 3. RUN THE SET-APP CMDLET Enables the app Use the Set-App cmdlet to set configuration properties on an app object. Enables the app

107 References: QUESTION 71 How would you disable the anti-malware filtering and ensure that engine updates from Microsoft are downloaded and updated? A. Disable-Antimalwareagent.ps1 B. Set-malwarefilteringserver C. Disable-Antimalwarescanning.ps1 (probable option) D. Update-MalwareFilteringServer.ps1 (guessed option) Correct Answer: C : To disable malware filtering, run the following command:& $env:exchangeinstallpath\scripts\disable-antimalwarescanning.ps1 QUESTION 72 You need to install and configure anti-spam and antimalware filtering. Which servers should you install the anti-spam agents and enable the anti-spam and antimalware filtering? (Choose two) A. You should install the anti-spam agents on the Client Access Servers only. B. You should install the anti-spam agents on the Mailbox servers only. C. You should install the anti-spam agents on the Client Access Servers and the Mailbox Servers. D. You should enable antimalware filtering on the Client Access Servers only. E. You should enable antimalware filtering on the Mailbox servers only. F. You enable antimalware filtering on the Client Access Servers and the Mailbox Servers. Correct Answer: BE : In Exchange 2013, the anti-spam agents can only be installed on the Mailbox role. But, the connection filtering which is very useful in fighting spam s is not available in 2013.

108 Same goes for the attachment filter. Even though CAS proxies s back and forth (if setup correctly), it is a stateless proxy and can t have any anti-spam agents on it. In Exchange 2013 the anti-spam functionality (through protocol agents) is running on the Mailbox Server and not on the Client Access Server so all mail, including all spam will hit the Mailbox Server when installed in a configuration as outlined in these blog post series. The anti-spam functionality is enabled using a PowerShell script (.\EnableAntiSpamAgents.ps1) and offers Sender and Recipient filtering, content filtering, Sender Reputation and Sender ID filtering. To activate the ant-spam agents on the Mailbox Server open the Exchange Management Shell and enter the following commands: CD $Exscripts.\Install-AntiSpamAgents.ps1 You can't enable the anti-spam agents on an Exchange 2013 Client Access Server The Malware Filter runs on every 2013 Mailbox server to protect against malware and viruses. References: QUESTION 73 HOTSPOT Your company has an Exchange Server 2013 organization. You configure domain security with a partner organization. You configure the required connectors. You plan to verify whether the partner organization configured the required settings for domain security. You enable logging for the Send connectors and the Receive connectors. You need to verify that the STARTTLS command is issued by an Exchange server when an message is sent to the partner organization. Which log folder should you review? (To answer, select the appropriate folder in the answer area.) Hot Area:

109 Correct Answer:

110 : Set-TransportService: Exchange 2013 Help QUESTION 74 HOTSPOT Your company has an Exchange Server 2013 organization. All servers have the Client Access server role and the Mailbox server role installed. The DNS Manager is shown in the exhibit. (Click the Exhibit button.)

111 Use the drop-down menus to select the answer choice that completes each statement. Hot Area:

112 Correct Answer:

113 : Edge Transport Servers: Exchange 2013 Help QUESTION 75 DRAG DROP You have an Exchange Server 2013 organization that contains a server named EX1. EX1 has the Mailbox server role and the Client Access server role installed. You plan to enable anti-spam protection on EX1. You need to configure the message hygiene settings for messages received from the Internet. The solution must meet the following requirements: Place messages that contain the word Contoso in a quarantine folder. Block all messages sent to former employees who no longer work for the company. Reject all messages sent from a source that has a sender reputation level (SRL) of 7 or greater. What should you configure? (To answer, drag the appropriate transport objects to the correct requirements. Each object may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.) Select and Place:

114 Correct Answer:

115 : QUESTION 76 Your company has offices in New York, Paris, and Montreal. An Active Directory site exists for each office. You have an Exchange Server 2013 organization that contains two servers in each site. One server in each site has the Mailbox server role installed and the other server in each site has the Client Access server role installed. You need to ensure that all of the outbound from each site is routed through the Client Access server in that site. Which should you do?

116 A. Remove the Mailbox servers from the list of source servers on each Send connector. B. Disable the Microsoft Exchange Transport service on each Mailbox server. C. Run the Set-SendConnector cmdlet and specify the -FrontendProxyEnabted.True parameter. D. Run the Set-TransportConfig cmdlet and specify the -InternatSMTPServers:$nult parameter. Correct Answer: C : Proxying Outbound Through Exchange 2013 Client Access Servers QUESTION 77 You have an Exchange Server 2010 organization. Users access Outlook Web App by using the name mail.contoso.com. You deploy Exchange Server 2013 to the existing organization. You change the DNS record of mail.contoso.com to point to an Exchange Server 2013 Client Access server. The users report that they can no longer access their mailbox from Outlook Web App. The OWA virtual directory in Exchange Server 2010 is configured as shown in the exhibit. (Click the Exhibit button.)

117 You need to ensure that the users on Exchange Server 2010 can access Outlook Web App. Which setting should you change? A. WindowsAuthentication B. FormsAuthentication C. LegacyRedirectType D. FailbackUri Correct Answer: A : Windows Authentication (NTLM) needs to be enabled on the Exchange 2010 Client Access Server to enable the Exchange 2013 Client Access Server to proxy connections. QUESTION 78 You have an Exchange Server 2013 organization that contains two Mailbox servers and two Client Access servers. You have a database availability group (DAG) that contains both Mailbox servers. You need to deploy public folders.

118 What should you do first? A. Run the New-PublicFolderDatabase cmdlet and specify the -Server parameter. B. Run the New-PublicFolder cmdlet and specify the -Path parameter. C. Run the New-Mailbox cmdlet and specify the -Publicfolder parameter. D. Run the New-MailboxDatabase cmdlet and specify the -PublicFotderDatabase parameter. Correct Answer: C : Set Up Public Folders in a New Organization, New-Mailbox -PublicFolder -Name MasterHierarchy. References: QUESTION 79 You have an Exchange Server 2013 organization that contains mailboxes for multiple companies. You need to segment the address lists in the organization per company. What should you assign to the users of each company? A. Address book policies (ABPs) B. Address lists C. Global Address Lists (GALs) D. address policies Correct Answer: A : A: Global address list (GAL) segmentation (also known as GAL segregation) is the process whereby administrators can segment users into specific populations to provide customized views of their organization s GAL. Address book policies (ABPs) allow you to segment users into specific groups to provide customized views of

119 your organization s global address list (GAL). When creating an ABP, you assign a GAL, an offline address book (OAB), a room list, and one or more address lists to the policy. You can then assign the ABP to mailbox users, providing them with access to a customized GAL in Outlook and Outlook Web App. The goal is to provide a simpler mechanism to accomplish GAL segmentation for on-premises organizations that require multiple GALs. References: QUESTION 80 HOTSPOT Your network contains an Active Directory forest. The forest contains a single domain named contoso.com. You have an Exchange Server 2013 organization that contains one Client Access server named CAS1 and one Mailbox server named MBX1. You plan to enable Outlook Anywhere for remote access from non-domain joined client computers. You deploy a trusted third-party certificate that has a subject name of mail.contoso.com. Users report that they fail to access their by using Microsoft Outlook 2013 when they work remotely from a non-domain joined client computer. From the internal network, the users can access their by using Outlook You verify that Autodiscover is configured remotely. You need to ensure that the remote users can access their by using Outlook Anywhere. Which command should you run? (To answer, select the appropriate options in the dialog box in the answer area.) Hot Area:

120 Correct Answer: :

121 Set-OutlookAnywhere: Exchange 2013 Help QUESTION 81 Your network contains an Active Directory forest named contoso.com. The forest contains one domain. You have an Exchange Server organization that contains three servers. The servers are configured as shown in the following table. An administrator implements Outlook Anywhere on Exchange Server Remote users who have a mailbox hosted on EX1 report that they receive the following error message when they attempt to configure a Microsoft Outlook profile. Remote users who have a mailbox hosted on EX3 can configure an Outlook profile successfully. You need to ensure that the remote users who have a mailbox on EX1 can access their mailbox by using Outlook Anywhere. What should you do? A. On EX2, run Set-OutlookAnywhere

122 B. On EX2, run Set-CasMailbox. C. On EX1, run Enable-OutlookAnywhere D. On EX1, run Set-OutlookAnywhere Correct Answer: C : Enable-OutlookAnywhere: Exchange 2010 Help QUESTION 82 HOTSPOT Your network contains two Active Directory sites named MainSite and DRSite. You have an Exchange Server 2013 organization that contains two servers. The servers are configured as shown in the following table. The active copy of DB1 is located on EX1. There are typically 100 MB of log files queued on EX1. You need to recommend a procedure to allow administrators to mount the mailbox database copies on EX2 if EX1 fails. The recovery point objective (RPO) for mailbox data is 200 MB. Which command should you recommend running? (To answer, select the appropriate options in the answer area.) Hot Area:

123 Correct Answer: : The MountDialOverride parameter is used to override the auto database mount dial (AutoDatabaseMountDial) setting for the target server and specify an alternate setting. BestEffort If you specify this value, the database automatically mounts regardless of the size of the copy queue length. References: QUESTION 83 DRAG DROP You have an Exchange Server 2013 organization. You create a script named New-CustomMailbox.ps1 to create mailboxes based on your company's requirements. You create a role group named Mailbox Provisioning. You need to ensure that the members of Mailbox Provisioning can create new mailboxes only by using New-CustomMailbox.ps1.

124 In which sequence should you run the commands? (To answer, move all of the commands from the list of commands to the answer area and arrange them in the correct order.) Select and Place: Correct Answer:

125 : The Organization Management role group doesn't, by default, have permissions to create or manage unscoped role groups. This is to prevent unscoped role groups from mistakenly being created or modified. The Organization Management role group can delegate the Unscoped Role Management management role to itself and other role assignees. For more information about how to create an unscoped top-level management role. STEP 1: Grant Organization Management group access to create unscoped roles. New-ManagementRoleAssignment "Unscoped Role Management-Organization Management" -Role "Unscoped Role Management" -SecurityGroup "Organization Management"

126 STEP 2: Create the Management Role New-ManagementRole "Helpdesk Provisioning Script" -UnScopedTopLevel STEP 3: Add management role entry to empty unscoped role. Add-ManagementRoleEntry "Helpdesk Provisioning Script\New-CustomMailbox.ps1" Parameters Name -UnScopedTopLevel STEP 4: Assign management role to user group New-ManagementRoleAssignment "Helpdesk Provisioning Script-Helpdesk Provisioning" -Role "Helpdesk Provisioning Script" -SecurityGroup "Helpdesk Provisioning" References: QUESTION 84 Your company has an Exchange Server 2013 organization. All Exchange servers have the Client Access server role and the Mailbox server role installed. All of the servers are members of a database availability group (DAG) named DAG1. You need to ensure that a user named User1 can move mailboxes between the servers. The solution must minimize the number of permission assigned to User1. To which role group should you add User1? A. Server Management B. Organization Management C. Help Desk D. Recipient Management Correct Answer: D : Recipient Management: Exchange 2013 Help QUESTION 85 You have an Exchange Server 2013 organization that contains a server named Server1. Server1 has the Client Access server role and the Mailbox server role installed. You monitor the performance of Server1, and you discover that the Exchange Server transport services consume a high amount of processor resources. You need to limit the amount of processor resources that the Exchange Server transport services consume.

127 Which three cmdlets should you run? A. New-WorkloadManagementPolicy. New-ThrottlingPolicy, and Set-ThrottlingPolicyAssociation B. New-WorkloadPolicy, New-ThrottlingPolicy and Set-ExchangeServer C. New-WorkloadPolicy, New-ThrottlingPolicy and Set-ThrottlingPolicyAssociation D. New-WorkloadManagementPolicy. New-WorkloadPolicy, and Set-ExchangeServer Correct Answer: D : QUESTION 86 HOTSPOT Your company has three main offices. Each office is configured as an Active Directory site as shown in the exhibit (Click the Exhibit button.)

128 You have an Exchange Server 2013 organization. Each office contains Exchange servers. All users access their mailbox by using Outlook Web App. All of the users have a mailbox on a server in their respective office. Use the drop-down menus to select the answer choice that completes each statement. Hot Area: Correct Answer:

129 QUESTION 87 DRAG DROP You are migrating an existing Exchange Server 2007 organization to Exchange Server You expect the migration to last several weeks. The servers in the organization are configured as shown in the following table. Users who have mailboxes on all of the servers will access Outlook Anywhere by using the mail.contoso.com name. You need to recommend which servers must be associated to the autodiscover.contoso.com and mail.contoso.com names. Which servers should you identify for each name? To answer, drag the appropriate servers to the correct name in the answer area. Each server may be used once, more than once, or not at all. Additionally, you may need to drag the split bar between panes or scroll to view content. Select and Place:

130 Correct Answer: : Configure Mail Flow and Client Access: Exchange 2013 Help Autodiscover Service: Exchange 2013 Help QUESTION 88

131 You have an Exchange Server 2013 organization. Each user has an In-Place Archive. You discover that several items in a user's In-Place Archive are corrupt. You need to ensure that the user can access the corrupt items. Which tool should you use? A. The Repair-FileIntegrity cmdlet B. The Isinteg command C. The New-MailboxRepairRequest cmdlet D. The Eseutil command Correct Answer: C : C: This cmdlet is available only in on-premises Exchange Server Use the New-MailboxRepairRequest cmdlet to detect and fix mailbox corruptions. You can run this command against a specific mailbox or against a database. While this task is running, mailbox access is disrupted only for the mailbox being repaired. If you're running this command against a database, only the mailbox being repaired is disrupted. All other mailboxes on the database remain operational. QUESTION 89 DRAG DROP You have an Exchange Server 2013 organization that contains a database availability group (DAG) named DAG1. The organization contains three servers. The servers are configured as shown in the following table. EX1 and EX2 are members of DAG1. EX1 has an active copy of a database named DB1 and a passive copy of a database named DB2. EX2 has a passive copy of DB1 and an active copy of DB2.

132 You plan to create a public folder named Invoices. You need to ensure that users can access the Invoices public folder if one of the DAG members fails. The solution must ensure that the users can send messages to the Invoices public folder. Which three actions should you perform in sequence? (To answer, move the appropriate three actions from the list of actions to the answer area and arrange them in the correct order.) Select and Place: Correct Answer:

133 : QUESTION 90 HOTSPOT A school has 200 students and 10 classes. Each class has 20 students. Each class has one teacher. The school has five administrative staff members. You need to design an Exchange Server 2013 organization for the school. The design must meet the following requirements: Students must be able to view only the addresses of the other students in their class, the teacher of their class, and the entire administrative staff. Teachers must be able to view only the addresses of the students in their class, all of the other teachers, and the entire administrative staff. The administrative staff must be able to see the addresses of everyone. Everyone will use Microsoft Outlook 2013 to view a list of all the users. You need to identify the minimum number of address lists, global address lists, Offline Address Books (OABs), and address book policies required for the design. How many of each should you identify? (To answer, select the appropriate numbers in the answer area.)

134 Hot Area: Correct Answer:

135 : Address Lists: 12 Class 1-10 (1 AL each) Each Class AL contains respective class teacher Teachers (1 AL) Admin Staff (1 AL)

136 Global Address Lists: 21 Class 1-10 (1 GAL each containing respective Class AL and Admin Staff AL) Teachers (1 GAL each containing respective Class AL, Teachers AL, and Admin Staff AL) Admin Staff (1 GAL (default GAL) containing everybody) OAB's: 21 one OAB for each GAL Address Book Policies: - 21 Only one GAL can be assigned per ABP, so if there are 21 GAL's surely there would need to be 21 ABP's? QUESTION 91 You create a mailbox named ConfRoom1 as shown in the exhibit. (Click the Exhibit button.)

137 Users report that when they schedule meetings and attempt to locate ConfRoom1 in the All Rooms address list, they do not see ConfRoom1 on the list. You need to ensure that the users can locate ConfRoom1 on the All Rooms address list. What should you do?

138 A. Modify the Sharing Policy that is associated to ConfRoom1. B. Run the Update-AddressList command and specify the -Identity parameter. C. Run the Set-Mailbox command and specify the -IsRootPublicFolderMailbox parameter. D. Delete the ConfRoom1 mailbox, and create a new resource mailbox. Correct Answer: D : Create a new Room Mailbox to schedule meetings in conference rooms, auditoriums, labs or other facilities Create new Room Mailbox QUESTION 92 You have an Exchange Server 2013 organization. You need to ensure that users receive a notification if the delivery of a message is delayed for more than one hour. Which cmdlet should you use? A. Set-FrontEndTransportService B. Set-MailboxTransportService C. Set-Tra nsportconf ig D. Set-TransportService Correct Answer: D : To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds. References: QUESTION 93 HOTSPOT Your network contains an Active Directory forest named contoso.com. The forest contains two domains named contoso.com and nwtraders.com.

139 You plan to deploy a new Exchange Server 2013 organization named Contoso. You need to ensure that you can deploy the first Exchange Server 2013 server to the forest root domain. What command should you run before you deploy the first Exchange Server 2013 server? (To answer, select the appropriate options in the answer area.) Hot Area: Correct Answer: : QUESTION 94 You have an Exchange Server 2010 organization. You deploy a server that has Exchange Server 2013 installed. You plan to install five additional servers that have Exchange Server 2013 installed. You are a member of the Organization Management management role group.

140 Your company hires an external IT consultant named Admin1. The company's security policy states that all external consultants must have the minimum number of required permissions on the network. You need to ensure that Admin1 can install a server named EX2. The solution must meet the requirements of the security policy. Which two tasks should you perform? (Each correct answer presents part of the solution. Choose two.) A. Add Admin1 to the Exchange Server role group. B. Create a new management role and a new role assignment policy. C. Run setup and specify the/newprovisionectservenex2 parameter. D. Add Admin1 to the Delegated Setup management role group. Correct Answer: CD : The Delegated Setup management role group is one of several built-in role groups that make up the Role Based Access Control (RBAC) permissions model in Microsoft Exchange Server Role groups are assigned one or more management roles that contain the permissions required to perform a given set of tasks. The members of a role group are granted access to the management roles assigned to the role group. Administrators who are members of the Delegated Setup role group can deploy servers running Exchange 2013 that have been previously provisioned by a member of the Organization Management role group. Members of the Delegated Setup role group can only deploy Exchange2013 servers. They can't manage the server after it's been deployed. To manage a server after it's been deployed, a user must be a member of the Server Management role group. References: QUESTION 95 HOTSPOT Your company has an Exchange Server 2013 organization named contoso.com. All users run Microsoft Outlook 2010 or Outlook 2013.

141 The company recently acquired another company named ADatum Corporation. All of the users at ADatum run Linux-based computers and use a third-party IMAP client to access their messages. You configure IMAP over SSL to use the external URL of mail.contoso.com. You need to publish the IMAP settings to Outlook Web App. What command should you run? (To answer, select the appropriate options in the answer area.) Hot Area: Correct Answer: : The ExternalConnectionSettings parameter specifies the host name, port, and encryption type that Exchange uses when IMAP4 clients connect to their from outside the corporate network. Enter a value using the format: <HostName>:<Port>:<Encryption Type>. The <Encryption Type> part of the multivalued value is optional. Valid values for <Encryption Type> are either TLS (Transport Layer Security) or SSL

142 References: QUESTION 96 You have an Exchange Server 2013 organization. The help desk reports that users fail to access their mailbox by using the URL All of the users successfully connect to their mailbox by using Exchange ActiveSync. You need to ensure that all of the users can access their mailbox by using the URL What should you configure on a Client Access server? A. From Internet Information Services (IIS) Manager, configure HTTP Response Headers on the OWA virtual directory. B. From Exchange Admin Center, create a new Outlook Web App mailbox policy. C. From File Explorer, modify the permissions of the Web.config file in the Default Web Site folder. D. From Internet Information Services (IIS) Manager, configure HTTP Redirect on the default web site. Correct Answer: D : Use IIS Manager to simplify the Outlook Web App URL and force redirection to SSL Start IIS Manager. Expand the local computer, expand Sites, and then click Default Web Site. At the bottom of the Default Web Site Home pane, click Features View if this option isn't already selected. In the IIS section, double-click HTTP Redirect. Select the Redirect requests to this destination check box. Type the absolute path of the /owa virtual directory. For example, type Under Redirect Behavior, select the Only redirect requests to content in this directory (not subdirectories) check box. In the Status code list, click Found (302). In the Actions pane, click Apply. Click Default Web Site. In the Default Web Site Home pane, double-click SSL Settings. In SSL Settings, clear Require SSL.Note: If you don t clear Require SSL, users won t be redirected when they enter an unsecured URL. Instead, they ll get an access denied error. References:

143 QUESTION 97 HOTSPOT You have an Exchange Server 2013 organization that contains four servers. The servers are configured as shown in the following table. You run Get-TransportConfig and receive the output shown in the exhibit. (Click the Exhibit button.)

144

145 Use the drop-down menus to select the answer choice that completes each statement. Hot Area: Correct Answer: : The ShadowMessagePreferenceSetting parameter specifies the preferred location for making a shadow copy of a message. Valid values are:

146 LocalOnly: A shadow copy of the message should only be made on a server in the local Active Directory site. RemoteOnly: A shadow copy of the message should only be made on a server in a different Active Directory site. PreferRemote: Try to make a shadow copy of the message in a different Active Directory site. If the operation fails, try make a shadow copy of the message on a server in the local Active Directory site. The default value is PreferRemote. The MaxRetriesForRemoteSiteShadow parameter specifies the maximum number of attempts to make a shadow copy of the message in a different Active Directory site. Valid input for this parameter is an integer between 0 and 255. The default value is 4. The total number of attempts to create a shadow copy of the message is controlled by the ShadowMessagePreferenceSetting parameter. References: QUESTION 98 You have an Exchange Server 2013 organization. You deploy the anti-spam features of Exchange Server You need to specify the spam quarantine mailbox. Which cmdlet should you run? A. Set-MailboxJunk Configuration B. Set-ContentFilterConfig C. Set-MalwareFilterPolicy D. Set-SenderFilterConfig Correct Answer: B : Configure a Spam Quarantine Mailbox: Exchange 2013 Help QUESTION 99 Your network contains an Active Directory forest. The forest contains a single domain named contoso.com. The network contains a legacy mail system that uses a SMTP namespace of contoso.com. You plan to deploy Exchange Server 2013.

147 There will be a period of interoperability while the is migrated from the legacy system to Exchange Server During the period of interoperability, you need to ensure that all incoming is received by an Exchange Server 2013 server, and then routed to the legacy mail system if an Exchange Server recipient cannot be found. You configure the firewall in the perimeter network to route SMTP traffic to the Exchange Server 2013 organization. What should you do next? A. Modify the existing accepted domain for contoso.com and create a new Send connector. B. Add a new external relay accepted domain for contoso.com and create a new Send connector. C. Add a new authoritative domain for contoso.com and create a new address policy. D. Add a new internal relay accepted domain for contoso.com and create a new address policy. Correct Answer: A : Step 1: Modify accepted domain for contoso.com and make it an internal relay domain. Step 2: Create a new send connector which routes mail for the contoso.com namespace to the legacy namespace - if a recipient cannot be found in the Exchange org. References: QUESTION 100 HOTSPOT You have an Exchange Server 2013 organization that contains three servers. The servers are configured as shown in the following table. All inbound messages from the Internet are routed through EX01.

148 You plan to remove EX01 from the organization. You need to ensure that all of the functionalities of EX01 are transferred to EX02 and EX03. The solution must minimize administrative effort. Which functionality should you transfer to each server? (To answer, select the appropriate server for each functionality in the answer area.) Hot Area: Correct Answer:

149 : In the console tree, navigate to Organization Configuration > Mailbox. In the result pane, click the Offline Address Book tab, and then select the OAB for which you want to move the generation to a new server. In the action pane, click Move. On the Move Offline Address Book page, click Browse to open the Select Mailbox Server dialog box. Select the server to which you want to move the OAB generation process, and then click OK. Click Move to move the OAB generation process to the new server. View the status of the move operation. The wizard will move the generation of your OAB to the new server and copy the existing files for the OAB to the new server. Click Back to make configuration changes. On the Completion page, review the following, and then click Finish to close the wizard: A status of Completed indicates that the wizard completed the task successfully. A status of Failed indicates that the task wasn't completed. If the task fails, review the summary for an explanation, and then click Back to make any configuration changes. Click Finish to close the wizard. References: QUESTION 101 HOTSPOT You have an Exchange Server 2013 organization that contains a database availability group (DAG) named DAG1. DAG1 contains two servers named EX01 and EX02. On EX01, you have three networks. The networks are configured as shown in the following table. You need to ensure that DAGNetwork02 is the primary replication network and DAGNetwork03 is configured for iscsi traffic only. What two commands should you run? (To answer, select the appropriate options in the answer area.)

150 Hot Area: Correct Answer: : QUESTION 102 HOTSPOT You have an Exchange Server 2013 organization that contains an accepted domain named contoso.com. A partner company has an Exchange Server 2013 organization named mvtraders.com. Nwtraders.com contains an SMTP server named mail.nwtraders.com.

151 Both organizations only use certificates from the same trusted third-party certification authority (CA). You need to ensure that all messages received from the SMTP domain named nwtraders.com are protected by using mutual TLS. What command should you run? (To answer, select the appropriate options in the answer area.) Hot Area: Correct Answer: : QUESTION 103 You have an Exchange Server 2013 organization that contains 5,000 mailboxes. A user named User1 tests several Windows Phone devices. You need to ensure that User1 can connect more than 20 Windows Phone devices to his mailbox,

152 Which cmdlet should you run? A. Set-ThrottlingPolicy B. Set-Mobil boxPolicy C. Set-ActiveSyncMailboxPolicy D. Set-CasMailbox Correct Answer: A : Set-Throttlingpolicy "Increased ActiveSync Devices" -EasMaxDevices 25 -EasMaxConcurrency 20 Set-Mailbox User1 -ThrottlingPolicy "Increased ActiveSync Devices" QUESTION 104 You deploy an Exchange Server 2013 organization to a test network for evaluation. You install the Mailbox server role and the Client Access server role on a server named ex01.contoso.com. You do not perform any other configurations. All of the ports from the Internet to ex01.contoso.com are open. You successfully connect to ex01.contoso.com from the Internet and from the internal network. You need to identify which types of Exchange Server clients will connect successfully to the organization without any further configurations. What should you identify? A. Internal Outlook Web App connections B. Android Phones using Activesync C. Windows RT devices running the Mail app D. Windows Phones that use Exchange ActiveSync Correct Answer: A

153 : QUESTION 105 You have an Exchange Server 2013 organization. You create a public folder. You assign an address to the public folder. You need to ensure that only a user named User1 can add content to the public folder by using . Which cmdlet should you run? A. Set-MailPublicFolder B. Set-PublicFolder C. Set-Mailbox D. Add-PublicFolderCMentPermission Correct Answer: C : QUESTION 106 You have an Exchange Server 2013 organization that contains 20 servers. You plan to deploy Exchange Server 2013 RTM Cumulative Update 1 (CU1) to the first Exchange server in the organization. You need to ensure that a user named ExchangeAdmin can deploy CU1 to the first server. The solution must minimize the number of permissions assigned to ExchangeAdmin. To which groups should you add ExchangeAdmin? A. Schema Admins, Domain Admins, and Enterprise Admins B. Schema Admins, Domain Admins, and Delegated Setup C. Domain Admins and Organization Management D. Enterprise Admins and Organization Management

154 Correct Answer: A : A: Both Schema Admins and Enterprise Admins membership is needed to update the schema and prepare AD Prepare Active Directory and Domains Before you install the release to manufacturing (RTM) version of Microsoft Exchange Server 2013 or later cumulative updates (CU) on any servers in your organization, you must prepare Active Directory and domains. The computers on which you plan to install Exchange 2013 must meet the system requirements. Your domains and the domain controllers must meet the system requirements in Network and directory servers in Exchange 2013 System Requirements. For multiple domain organizations running the following /Prepare* commands, we recommend the following: Run the commands from an Active Directory site that has an Active Directory server from every domain. Run the first server role installation from an Active Directory site with a writeable global catalog server from every domain. Verify that replication of objects from the preceding actions is completed on the global catalog server in the Active Directory site before installing the first Exchange 2013 server to that site. If you run the Exchange 2013 Setup wizard with an account that has the permissions required (Schema Admins, Domain Admins, and Enterprise Admins) to prepare Active Directory and the domain, the wizard automatically prepares Active Directory and the domain. For more information, see Install Exchange 2013 Using the Setup Wizard. However, you must first install the Active Directory management tools on the computer prior to preparing the schema or domains. To do this, see the Active Directory preparation section in Exchange 2013 Prerequisites. You must specify the /IAcceptExchangeServerLicenseTerms parameter when you run setup.exe to accept the Exchange 2013 license terms. References: QUESTION 107 You have an Exchange Server 2013 organization. An Active Directory administrator is concerned about the permissions assigned to a group named Exchange Trusted Subsystem. Exchange Trusted Subsystem has a member named Exchange Windows Permissions. You need to show the Active Directory administrator all of the permissions assigned to Exchange Trusted Subsystem. What should you use? A. ADSI Edit B. Active Directory Sites and Services C. Dsget D. Active Directory Users and Computers

155 Correct Answer: D : D: ADUC would be the best choice to view permissions and group memberships assigned to an AD object. QUESTION 108 DRAG DROP You have an Exchange Server 2013 organization. You plan to delegate the following administrative tasks: View the status of the message queue. Create, mount, and dismount databases. Restore mailboxes from a recovery database, Modify the settings of Exchange ActiveSync devices. You need to identify which role group must be used to delegate each administrative task. The solution must ensure that the role group that has the fewest administrative privileges is used. Which role groups should you identify? {To answer, drag the appropriate role groups to the correct tasks. Each role group may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.) Select and Place:

156 Correct Answer:

157 : Understanding Management Role Groups: Exchange 2013 Help QUESTION 109 HOTSPOT Your network contains three Exchange Server 2013 servers that have the Client Access server role installed. Each server is configured as a POP3 server and an IMAP4 server. You deploy the Network Load Balancing (NLB) feature on the servers and configure NLB as shown in the exhibit (Click the Exhibit button.)

158 Use the drop-down menus to select the answer choice that completes each statement. Hot Area:

159 Correct Answer: : POP3 over SSL uses port not listed in the exhibit, therefore not load balanced WLNB is not service only IP based affinity supported. Therefore, the session will be cookie based (sticky) and the same real server will be referenced in each session reconnection. References:

160 QUESTION 110 HOTSPOT You have an Exchange Server 2013 organization that contains three moderated distribution groups named DG1, DG2, and DG3. DG3 is a member of DG2. You need to exclude from moderation the messages sent from the members of DG3 to the members of DG1. The solution must maintain moderation for the messages sent from all other users. What command should you run? (To answer, select the appropriate options in the answer area.) Hot Area: Correct Answer: : QUESTION 111 You have an Exchange Server organization. The organization contains a server named EX01 that has Exchange Server 2010 installed and a server named EX02 that has Exchange Server 2013 installed.

161 Your mailbox is hosted on EX01. You need to access the Exchange Admin Center (EAC). Which URL should you use? A B C. D. Correct Answer: B : If you re in a coexistence scenario, where you re running Exchange 2010 and Exchange 2013 in the same organization, and your mailbox is still housed on the Exchange 2010 Mailbox server, the browser will default to the Exchange 2010 ECP. You can access the EAC by adding the Exchange version to the URL. For example, to access the EAC whose virtual directory is hosted on the Client Access server CAS15-NA, use the following URL: ExchClientVer=15. Conversely, if you want to access the Exchange 2010 ECP and your mailbox resides on an Exchange 2013 Mailbox server, use the following URL: References: QUESTION 112 You have an Exchange Server 2013 organization. The organization contains four servers in the same Active Directory site. The servers are configured as shown in the following table.

162 EXB and EX4 are members of a database availability group (DAG) named DAG1. All users use Microsoft Outlook 2013 to connect to their mailbox. You need to recommend a client access solution to ensure that all of the users can connect to their mailbox if EX1 or EX2 fails. What should you recommend? A. Add a layer 4 hardware load balancer that balances RPC traffic B. Add a layer 7 hardware load balancer that balances the traffic on port 443. C. Add a layer 7 hardware load balancer that balances RPC traffic. D. Replicate all of the databases in DAG1 to both DAG1 members. Correct Answer: B : In Exchange 2013, RPC over TCP has been disabled. All outlook communications are now through RPC over HTTP (Outlook Anywhere). This unifies the CAS protocol methods and provides a stable and reliable connectivity network between clients and server and between CAS and Mailbox Server. It also reduces the number of namespaces required. It also eliminates end user interruptions. Hence moving mailboxes around in DAG and moving mailboxes between mailbox databases are now easy. QUESTION 113 Your company has a main office and three branch offices. The main office is located in Austin. The branch offices are located in Denver, San Diego, and Chicago. The network contains an Active Directory forest. The forest contains a single domain. Each office is configured as an Active Directory site. The site in Austin contains four domain controllers that run Windows Server 2008 R2 and are configured as global catalog servers. The sites in Denver, San Diego, and Chicago each contain a read-only domain controller (RODC) that runs Windows Server 2008 R2. No other domain controllers exist on the network. You plan to deploy an Exchange Server 2013 organization. Exchange Server 2013 servers will be deployed in the Austin, Denver, and San Diego sites. Users from the Chicago site will access their mailbox remotely. You need to recommend changes to the Active Directory infrastructure to support the planned deployment of Exchange Server What should you recommend? A. Replace the RODCs in the Denver and San Diego sites with domain controllers that are configured as global catalog servers.

163 B. Configure the RODCs in the Denver and San Diego sites as read-only global catalog servers. C. Configure Active Directory automatic site coverage for the Chicago site. D. Upgrade all of the RODCs to Windows Server Correct Answer: A : There must be a writable copy of the global catalog at each site where an Exchange 2013 server is to be installed. References: QUESTION 114 HOTSPOT You have an Exchange Server 2013 organization that contains a server named EX1. The network contains two domain controllers named DC1 and DC2. You plan to make changes to the Active Directory infrastructure and to remove DC2 from the network. You need to verify whether EX1 writes Active Directory changes to DC2. What command should you run? To answer, select the appropriate options in the answer area. Hot Area:

164 Correct Answer: : The Get-OrganizationConfig cmdlet is used to get configuration data for an Exchange organization. We should specify DC2 as we are interested if information from EX1 is propagated to DC2. References: QUESTION 115 Your network contains an Active Directory forest named contoso.com. The forest contains the domain controllers configured as shown in the following table.

165 You plan to deploy an Exchange Server 2013 organization to the forest. A company policy prevents administrators from logging on to DC2 to perform installations. You need to prepare the Active Directory schema for the planned Exchange Server deployment. You verify that your user account has all the required permissions to achieve the task. The solution must minimize changes to the Active Directory infrastructure. A. Move the schema master role to DC1, and then run Exchange setup. B. Deploy a member server to contoso.com, and then move the server to the West site. Run adprep.exe from the member server. C. Log on to DC3 and then run Exchange setup. D. Log on to any server in the West site, and then run Exchange setup. Correct Answer: C :

166 We can extend the schema by running Exchange setup. Exchange setup must be run on a server that is in the same domain and same site as the schema master. Incorrect answers: A: The computer where you'll run the command to extend the schema needs to be in the same Active Directory domain and site as the schema master. DC3 is not. B: Adprep is used to upgrade the Active Directory infrastructure forest to a newer version such as to Windows Server Adprep is not used for ExchangeServer infrastructure changes. D: Only DC2 in the West site has the Schema master role. We cannot run Exchange Setup from the other servers in the West site. Reference: QUESTION 116 DRAG DROP You have an Exchange Server 2013 organization that contains the servers configured as shown in the following table. You need to add EX2 to DAG2. The solution must maintain redundancy for all mailbox databases. Which five actions should you perform in sequence before you can add EX2 to DAG2? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

167 Select and Place: Correct Answer:

168 : : Box 1: On EX5 install Windows Server 2012 R2 and Exchange Server Windows 2008 Standard cannot be added to a DAG. So we install Windows Server 2012 R2 and Exchange Server Box 2: Add EX5 to DAG1 We need to add EX5 to DAG1 for redundancy before we remove EX2. Box 3: Create Mailbox database copies on EX5 We must set up EX5 mailbox database copies for redundancy before we remove EX2. Box 4: On EX2, remove all of the mailbox database copies. We remove the DAG1 mailbox database copies from EX2. We must do this before removing EX2 from DAG1 as the Mailbox server must not host any replicated databases when it is removed. Box 5: Remove EX2 from DAG1 Now can when EX5 being set up for DAG1 we can remove EX2 from DAG1.

169 QUESTION 117 You have an Exchange Server 2013 organization. A new policy requires that all iphone users access their on-premises mailbox by using the OWA for iphone app. You need to ensure that push notifications for the OWA for iphone app are configured before the users install the app. Which three actions should you perform? Each correct answer presents part of the solution. A. Configure Microsoft Azure Active Directory Sync (Azure AD Sync). B. Modify the EWS virtual directory. C. Enable push notifications proxy. D. Enroll in Microsoft Office 365 for business. E. Modify the OWA virtual directory. F. Set up on premises Exchange 2013 to Office 365 Authentication. Correct Answer: CDF : Configuring push notifications proxying for OWA for Devices To enable push notifications, the admin must: (D) Enroll your organization in Office 365 for business. Update all on-premises servers to Exchange Server 2013 Cumulative Update 3 (CU3) or later. (F) Set up On-premises Exchange 2013 to Office 365 Authentication (C) Enable push notifications from the on-premises Exchange Server 2013 to Office 365 and verify that push notifications are working. References: QUESTION 118 DRAG DROP You have an Exchange Server 2013 organization. You need to recommend a solution to ensure that users can access their mailbox by using IMAP4. The solution must meet the following requirements: The users must be able to download their messages from multiple devices. The users must be able to look up their SMTP server from Outlook Web App.

170 All IMAP4 connections must be audited. What should you recommend? To answer drag the appropriate recommendation to the correct requirement. Each recommendation may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. Select and Place: Correct Answer:

171 : Box 1: Run the Set-SendConnector cmdlet. In Microsoft Exchange Server 2013, a Send connector controls the flow of outbound messages to the receiving server. They are configured on Mailbox servers running the Transport service. Most commonly, you configure a Send connector to send outbound messages to a smart host or directly to their recipient, using DNS. By default, Microsoft Exchange Server 2013 doesn t allow you to send mail outside of your domain. To send mail outside your domain, you need to create a Send connector. Box 2: You can set up logging with Set-IMAPSettings. Box 3: Run the Set-ReceiveConnector Settings cmdlet. Exchange 2013 servers running the Transport service require Receive connectors to receive messages from the Internet, from clients, and from other servers. A Receive connector controls inbound connections to the Exchange organization. References:

172 QUESTION 119 You have an internal network and a perimeter network. On the perimeter network, you deploy two Exchange Server 2013 servers that have the Edge Transport server role installed. On the internal network, you deploy five Exchange Servers that have the Mailbox server role and the Client Access server role installed. You need to recommend a solution to ensure that messages are received by the organization if the Edge Transport server fails. The solution must ensure that the server is load balanced. What is the best recommendation to achieve the goal? More than one answer choice may achieve the goal. Select the BEST answer. A. For each Edge Transport server, create a host (A) record. Create mail exchanger (MX) records that point to the A records. Set the preference of both MX records to value of 100. B. Create a mail exchanger (MX) record that points to the IP address of each Edge Transport server. Set the preference of both MX records to a value of 10. C. For each Edge Transport server, create a host (A) record. Create mail exchanger (MX) records that point to the A records. Set the preference of one of the MX records to a value of 11. Set preference of the other MX record to value of 12. D. Create a host (A) record named amil.contoso.com that contains the IP address for both Edge Transport servers. Create a mail exchanger (MX) record that points to mail.contoso.com. Correct Answer: A References: QUESTION 120 You have an Exchange Server 2013 organization. Users connect to their mailbox by using Microsoft Outlook 2013 and mobile devices. A user named User1 loses a mobile device. You need to wipe the mobile device remotely. Which cmdlet should you use? A. Remove-MobileDevice B. Clear-MobileDevice C. Set-Mailbox D. Remove-ActiveSyncDevice

173 Correct Answer: B : The Clear-MobileDevice cmdlet deletes all user data from a mobile device the next time that the device receives data from the server running Microsoft Exchange Server References: QUESTION 121 A company named Contoso, Ltd. has an Exchange Server 2013 organization that contains two servers. Contoso has a subsidiary named Fabrikam, Inc. All users have mailboxes in the Contoso organization. You implement an address book policy (ABP) for the users from Fabrikam. A company policy states that the users from Contoso must not be able to view the contact cards of the Fabrikam users. You need to implement a solution to meet the requirement of the company policy. Which two actions should you perform? Each correct answer presents part of the solution. A. Run the New-TransportRule cmdlet B. Modify the properties of the ABP. C. Run the Set-TransportConfig cmdlet. D. Run the Set-Mailbox cmdlet. E. Install and Enable the Address Book Policy Routing agent. F. Modify the properties of the global address list (GAL). Correct Answer: EF : F: First we modify the properties of GAL of the ABP so that only Fabrikam users can access the ABP.

174 An Address Book Policy consists of a subset of the various address objects that exist in the. The resulting scope of an ABP is equal to that of the GAL contained in the policy, Note: Global address list (GAL) segmentation (also known as GAL segregation) is the process whereby administrators can segment users into specific populations to provide customized views of their organization s GAL. Address book policies (ABPs) allow you to segment users into specific groups to provide customized views of your organization s global address list (GAL). When creating an ABP, you assign a GAL, an offline address book (OAB), a room list, and one or more address lists to the policy. You can then assign the ABP to mailbox users, providing them with access to a customized GAL in Outlook and Outlook Web App. The goal is to provide a simpler mechanism to accomplish GAL segmentation for on-premises organizations that require multiple GALs. E: If you re using ABPs, and you don t want users in separate virtual organizations to view each other s potentially private information, you can turn on the Address Book Policy Routing agent. The ABP Routing agent is a Transport agent that controls how recipients are resolved in your organization. When the ABP Routing agent is installed and configured, users that are assigned to different GALs appear as external recipients in that they can t view external recipients contact cards. References: QUESTION 122 Your company has a main office and three branch offices. You have an Exchange Server 2013 organization. The main office contains five Exchange servers. Each branch office contains two Exchange servers. All of the servers have all of the Exchange server roles installed. Each branch office contains one database availability group (DAG). You need to recommend a load balancing solution for the branch offices. The solution must ensure that both servers in each office are the targets of all client connections. What are two possible recommendations? Each correct answer presents a complete solution. A. DNS round robin B. Layer 4 hardware load balancers C. CAS arrays D. Network Load Balancing (NLB) clusters Correct Answer: BC : B: The use of hardware load balancers is still supported for Exchange C: In Exchange 2010, Microsoft introduced the concept of a Client Access array. After a Client Access array was configured for an Active Directory site, all Client

175 Access servers in the site automatically became members of the array. In current builds of Exchange 2013, no configuration of a Client Access array is required, because the deployment of a load balanced and highly available service is much simpler. References: QUESTION 123 You have an Exchange Server 2013 organization named contoso.com that contains 10 servers. Your company purchases a company named Fabrikam, Inc. Fabrikam has an Exchange Server organization named fabrikam.com. All of the messages sent between the organizations is routed over the Internet. You need to ensure that the messages sent from contoso.com to fabrikam.com are encrypted. What is best way to achieve the goal? More than one answer choice may achieve the goal. Select the BEST answer. A. Create a Send connector of type Partner. B. Instruct all of the users in contoso.com to use SMIME. C. Modify the Authentication settings for the Send connectors in contoso.com. D. Create a federation trust between the organizations. Correct Answer: A : Create a Send connector to send to a partner, with Transport Layer Security (TLS) applied If you want to ensure secure, encrypted communication with a partner, you can create a Send connector that is configured to enforce Transport Layer Security (TLS) for messages sent to a partner domain. TLS provides secure communication over the Internet. See step 2 below. In the EAC, navigate to Mail flow > Send connectors, and then click Add-Add Icon. In the New send connector wizard, specify a name for the send connector and then select Partner for the Type. When you select Partner, the connector is configured to allow connections only to servers that authenticate with TLS certificates. Click Next. Verify that MX record associated with recipient domain is selected, which specifies that the connector uses the domain name system (DNS) to route mail. Click Next. Under Address space, click Add-Add Icon. In the Add domain window, make sure SMTP is listed as the Type. For Fully Qualified Domain Name (FQDN), enter the name of your partner domain. Click Save. For Source server, click Add-Add Icon. In the Select a server window, select a Mailbox server that will be used to send mail to the Internet via the Client Access server and click Add-Add Icon. After you've selected the server, click Add-Add Icon. Click OK. Click Finish.

176 References: QUESTION 124 You have an Exchange Server 2013 organization that contains two Edge Transport servers. The Edge Transport servers are configured to perform recipient filtering. You deploy a new Edge Transport server named Edge3. You need to ensure that Edge3 performs recipient filtering. What should you do? A. Create a new Edge Subscription for Edge3. B. Run the Set-TransportConfig cmdlet on Edge3. C. Export the Edge Subscription from an existing Edge Transport server and import the Edge Subscription to Edge3. D. Run the ExportEdgeConfig.ps1 and the ImportEdgeConfig.ps1 scripts. Correct Answer: D : We copy the configuration from an existing Edge Transport server with the ExportEdgeConfig.ps1 script and apply to new server Edge3 with ImportEdgeConfig.ps1 script. Note: Configure Edge Transport server using cloned configuration You can use the provided Exchange Management Shell scripts (located in %ExchangeInstallPath%Scripts) to duplicate the configuration of an Edge Transport server. This process is referred to as cloned configuration. Cloned configuration is the practice of deploying new Edge Transport servers based on configuration information from a previously configured source server. The configuration information from the previously configured source server is copied and exported to an XML file, which is then imported to the target server. Two Shell scripts are used to perform cloned configuration tasks: ExportEdgeConfig.ps1 Exports all user-configured settings and data from an Edge Transport server and stores that data in an XML file. ImportEdgeConfig.ps1 During the validate configuration step, the ImportEdgeConfig.ps1 script checks the exported XML file to see whether the server-specific export settings are valid for the target server. References: QUESTION 125 HOTSPOT

177 You have an Exchange Server 2013 organization that contains several servers in a single site. You run the Get-TransportConfig cmdlet and you receive the following output.

178

179 Use the drop-down menus to select the answer choice that completes each statement. Hot Area: Correct Answer:

180 : Box 1: make a shadow copy of the message on another server From the exhibit we see that: ShadowRedundacyEnable: True With shadow redundancy in Microsoft Exchange Server 2013 the transport server makes a redundant copy of any messages it receives before it acknowledges successfully receiving the message back to the sending server. Box 2: two days In the exhibit we see: ShadowMessageAutoDiscardInterval : 2.00:00:00 This means two days. Note: Use the ShadowMessageAutoDiscardInterval parameter of the Set-TransportConfig cmdlet to configure the maximum age for shadow messages in your organization. By default, shadow messages are discarded automatically after two days. References: QUESTION 126 You have an Exchange Server 2013 on-premises organization and a Microsoft Office 365 tenant. All mailboxes are hosted on-premises. You need to implement an archiving solution for all users. The solution must ensure that all mailbox content older than 18 months is moved to Personal Archives in Office 365. What should you implement? A. A default policy tag (DPT) B. A retention policy C. A personal tag D. A retention policy tag (RPT) E. A retention hold Correct Answer: B : To apply one or more retention tags to a mailbox, you must add them to a retention policy and then apply the policy to mailboxes.

181 In our case we would need a default policy tag and then add it to a retention policy. References: QUESTION 127 In Europe, your company has one main office and five branch offices. In Asia, the company has one main office and five branch offices. Each main office contains a data center. The network contains an Active Directory forest. The forest contains a single domain named contoso.com. Each office is configured as an Active Directory site. All client computers are joined to the domain. You plan to deploy Exchange Server 2013 servers to both data centers. You need to recommend a client connectivity solution that meets the following requirements: Users who connect from the Internet must be configured automatically to connect to their mailbox by using Outlook Anywhere. Users from the branch offices must use Outlook Anywhere to connect to the Client Access servers in their respective region. What should you include in the recommendation? A. A service connection point (SCP) in Active Directory and a host (A) record in the public DNS zone B. A service location (SRV) record in the internal DNS zone and a service location (SRV) record in the public DNS zone C. A service connection point (SCP) in Active Directory and an inbound port rule for TCP 389 D. A service location (SRV) record in the public DNS zone and an inbound port rule for TCP 389 Correct Answer: B : You must provide a host service (SRV) resource record in DNS for Outlook clients to discover the Autodiscover service by using DNS. We should provide two SRV records, one for the internal DNS zone and one for the public DNS zone. Incorrect Answers: A: Service Connection Points (SCPs) are objects in Active Directory that hold information about services, but SCP would not be useful for setting up Outlook Anywhere. Instead we need to configure the DNS. C, D: TCP port 389 is the LDAP protocol, but Outlook Anywhere does not use this port so there is no need for a port rule for it. The Windows RPC over HTTP Proxy component, which Outlook Anywhere clients use to connect, wraps remote procedure calls (RPCs) with an HTTP layer. This allows traffic to traverse network firewalls without requiring RPC ports to be opened.

182 References: QUESTION 128 You have an Exchange Server 2013 organization that contains the servers configured as shown in the following table. All inbound messages from the Internet are received by EX1 and EX2. You notice several communication errors between Subnet1 and Subnet2. Another administrator is working to resolve the communication errors. You need to identify if delivery to the organization fails due to the communication errors by monitoring the inbound TCP ports in Subnet2. Which port should you monitor? A. 25 B. 475 C. 587 D Correct Answer: A : QUESTION 129 You have an Exchange Server 2013 organization that contains five servers. The organization contains 5,000 mailboxes.

183 One hundred users plan to leave your company during the next 48 hours to run a new company named Fabrikam, Inc. The mailboxes of the 100 users are in a mailbox database named DB5. The deleted item retention setting for DB5 is two days. You need to implement a solution to meet the following security requirements: The 100 users must be prevented from permanently deleting any messages from their mailbox. In 48 hours, you must create a copy of only the messages that contain the word Fabrikam. The solution must be implemented as quickly as possible. What should you do? A. Modify the deleted item retention period for DB5, and then run the New-MailboxSearch cmdlet in 48 hours. B. Enable In-Place Hold for the 100 mailboxes, and then run the Search-Mailbox cmdlet in 48 hours. C. Enable Single Item Recovery for the 100 mailboxes, and then run the New-MailboxSearch cmdlet in 48 hours. D. Modify the deleted item retention period for the 100 mailboxes, and then run the New-MailboxSearch cmdlet in 48 hours. Correct Answer: B QUESTION 130 HOTSPOT You have an Exchange Server 2013 organization and a Microsoft Office 365 tenant that are configured for hybrid coexistence. Five hundred users have mailboxes in the Exchange Server 2013 organization. Six hundred users have mailboxes in Office 365. You need to implement a mailbox solution for the support department. The solution must meet the following requirements: All users must be able to send messages to a dedicated mailbox for support. All of the users from the support department must be able to log on to the dedicated support mailbox and read the messages in the mailbox. All of the users from the support department must be able to reply to the messages sent to the dedicated support mailbox. The replies must identify to the name of the user replying. Must apply the principle of least privileges. What should you do? To answer, select the appropriate options in the answer area.

184 Hot Area: Correct Answer:

185 QUESTION 131 You plan to deploy three Exchange Server 2013 servers. Each server has eight 1-TB internal hard disk drives for mailbox database storage. All of the mailbox databases will replicate to all of the servers. You need to recommend a disk configuration for the servers that meets the following requirements: Users must be able to access their mailbox if a single disk fails. The amount of space available for mailbox data must be maximized. Which disk configuration should you use on each server?

186 A. JBOD B. RAID 5 C. RAID 1 D. RAID 10 Correct Answer: B : QUESTION 132 Your network contains an Active Directory forest named contoso.com. The forest contains four sites named Site1, Site2, Site3, and Site4. You have an Exchange Server 2013 organization that contains several servers in each site. You need to prevent users who have mailboxes in Site2 from sending messages that are larger than 2 MB to recipients in Site3. What should you do? A. Run the Set-ADSiteLinkcmdlet. B. Create a message classification. C. Create a custom Send connector. D. Run the Set-ADSitecmdlet. Correct Answer: A : References: QUESTION 133 HOTSPOT You have an Exchange Server 2013 organization.

187 All users connect to their mailbox by using a mobile device. You need to ensure that an event is written to the application log when a user attempts to connect to the organization by using a second mobile device. What command should you run? To answer, select the appropriate options in the answer area. Hot Area: Correct Answer:

188 : References: QUESTION 134 HOTSPOT You plan to deploy an Exchange Server 2013 organization. The security department identifies the following requirements for the planned deployment: Only members of a security group named ExSecure must be able to create Exchange Server recipients. Only members of a security group named ExSecureAdmin must be able to manage Exchange Server organization configurations. Members of ExSecure and ExSecureAdmin must be able to use the Exchange Management Shell to manage Active Directory objects. You need to identify which permission model must be used to meet each requirement. What should you identify? To answer, select the appropriate options in the answer area. Hot Area:

189 Correct Answer:

190 : References:

191 QUESTION 135 Your company has five main offices. Each office contains a data center. You plan to deploy an Active Directory forest and an Exchange Server 2013 organization. Each office will be configured as a separate Active Directory site. User mailboxes will be hosted in each site. You need to recommend an Exchange Server 2013 deployment strategy that meets the following requirements: Provides redundancy for all mailbox databases Creates a temporary copy of outbound messages Minimizes the number of servers deployed to the network Provides redundancy for client access by using Network Load Balancing (NLB) What should you recommend? A. In each site, deploy one server that has both the Mailbox server role and the Client Access server role installed and another server that has the Client Access server role installed. B. In each site, deploy one server that has the Mailbox server role installed and two servers that have the Client Access server role installed. C. In each site, deploy one server that has both the Mailbox server role and the Client Access server role installed. D. In each site, deploy two servers that have both the Mailbox server role and the Client Access server role installed. Correct Answer: B : WNLB can't be used on Exchange servers where mailbox DAGs are also being used because WNLB is incompatible with Windows failover clustering. If you're using an Exchange 2013 DAG and you want to use WNLB, you need to have the Client Access server role and the Mailbox server role running on separate servers. References: QUESTION 136 Your company has two data centers named Main1 and Main2. Each data center connects directly to the Internet and has a link to the other data center. All servers run Windows Server 2012 R2. The network contains an Active Directory forest. Each data center is configured as an Active Directory site.

192 You plan to deploy two Exchange Server 2013 servers to each data center. Each data center will host 500 user mailboxes for its respective users. All of the users will connect remotely to access their mailbox. You need to recommend a deployment solution that meets the following requirements: The users from both data centers must be able to access their mailbox if the link between the data centers fails. The users from both data centers must be able to access their mailbox if a single server fails. The solution must minimize manual intervention if a site fails. What is the best recommendation to achieve the goal? More than one answer choice may achieve the goal. Select the BEST answer. A. two database availability groups (DAGs) that each contains one server from each data center B. one database availability group (DAG) that contains all of the servers C. two database availability groups (DAGs) that each contains all of the servers D. one database availability group (DAG) that contains all of the servers in Main1 and one DAG that contains all of the servers in Main2. Correct Answer: B : References: QUESTION 137 Your company has five main offices. Each office contains a data center. You plan to deploy an Active Directory forest and an Exchange Server 2013 organization. Each office will be configured as a separate Active Directory site. You need to recommend an Exchange Server 2013 deployment strategy that meets the following requirements: Replicates user mailboxes across multiple servers Creates a temporary copy of outbound messages Minimizes the number of servers deployed to the network What should you recommend? A. In each site, deploy one server that has both the Mailbox server role and the Client Access server role installed.

193 B. In each site, deploy two servers that have the Mailbox server role installed and two servers that have the Client Access server role installed. C. In each site, deploy two servers that have both the Mailbox server role and the Client Access server role installed. D. In one site, deploy two servers that have the Mailbox server role installed. In all other sites, deploy one server that has the Client Access server role installed. Correct Answer: A : QUESTION 138 Your network contains two Active Directory forests named contoso.com and fabrikam.com. Contoso.com is configured as a user forest. Fabrikam.com is configured as a resource forest. You deploy an Exchange Server 2013 organization. You need to recommend a solution to provide five administrators in contoso.com with the ability to manage the Exchange Server resources by using role-based administration. What should you recommend creating? A. a new management role group in fabrikam.com and a new universal security group in contoso.com B. a linked role group and a universal security group in contoso.com and linked mailboxes in fabrikam.com C. a linked role group in fabrikam.com and a universal security group in contoso.com D. linked mailboxes and a role group in fabrikam.com Correct Answer: C : References: QUESTION 139 HOTSPOT You plan to deploy an Exchange Server 2013 organization. The organization will contain the servers configured as shown in the following table.

194 Server1, Server2, and Server3 will be members of a database availability group (DAG) named DAG1. You deploy a firewall between the internal network and the Internet. You need to recommend a solution to meet the following requirements: Ensure that users can access their mailbox from the Internet by using Microsoft Outlook if a server fails. Ensure that users can access Unified Messaging (UM) services from the Internet if a server fails. Minimize costs. What should you recommend? To answer, select the appropriate options in the answer area. Hot Area:

195 Correct Answer:

196 References: QUESTION 140 HOTSPOT You have an Exchange Server 2013 organization. You deploy an Office Web Apps Server named Server1. You need to integrate the Office Web Apps Server and the Exchange Server organization. What command should you run? To answer, select the appropriate options in the answer area. Hot Area:

197 Correct Answer: References: QUESTION 141 You have an Exchange Server 2013 organization that contains three Client Access servers named EX1, EX2, and EX3. The organization also contains eight

198 Mailbox servers. All users have client computers that have Microsoft Outlook 2013 installed. You create a Network Load Balancing (NLB) cluster and add all of the Client Access servers as hosts in the cluster. The cluster has the following configurations: The default host is set to EX1. A port rule is configured for HTTPS traffic. The port rule has the affinity parameter set to Single. The port rule has the filtering mode set to Single host. The port rule has the Handling priority set to the default option. You discover that Outlook always connects to EX1. You need to ensure that client connections are handled by all three Client Access servers. What should you modify? A. The affinity parameter of the port rule. B. The filtering mode of the port rule. C. The default host of the cluster. D. The handling priority of the port rule. Correct Answer: B : References: QUESTION 142 You have an Exchange Server 2013 organization. You deploy an anti-spam appliance and you connect the appliance to the Exchange Server organization. You need to disable keyword filtering of messages that are received from the Internet.

199 Which Windows PowerShell cmdlet should you use? A. Set-SenderFilterConfig B. Set-ReceiveConnector C. Disable-TransportAgent D. Disable-Service Correct Answer: C : References: QUESTION 143 HOTSPOT Your company has two main offices named Main1 and Main2. Each office has a data center. You have an Exchange Server 2013 organization. Each data center contains several Exchange servers and connects directly to the Internet. Each office has a Send connector to the Internet. You configure each office as a separate site and you configure Main1 as a hub site. The company opens a branch office that contains a small data center. You deploy an Exchange Server 2013 server to the data center. The data center has a direct network link to Main1. All of the site link costs are set to the default values. In the table below identity through which office the message will be transmitted first for each scenario. NOTE: Make only one selection in each row. Hot Area:

200 Correct Answer:

201 References: QUESTION 144 You have an Exchange Server organization that contains five servers. Users who have their mailbox on a server named EX1 report that they fail to receive messages. You verify that the messages sent to the mailboxes on EX1 are delivered successfully to the server. You also verify that all of the mailbox databases on EX1 are mounted. You discover that the hard disk drive on EX1 has only 10 GB of free space. You delete 20 GB of unnecessary data on EX1. Users report that now they are receiving all of their messages successfully to their mailbox. You need to ensure that EX1 will prevent the delivery of messages to mailboxes only if less than 2 GB of hard disk space is available. What should you do? A. Modify the Organization transport settings. B. Modify the mailbox database settings. C. Modify the EdgeTransportexe.config file. D. Disable the Safety Net feature. Correct Answer: C : References: QUESTION 145 HOTSPOT You have an Exchange Server 2013 organization that contains two servers named EX1 and EX2. EX1 and EX2 are members of a database availability group (DAG) named DAG1.

202 You need to identify the last several times that a mailbox database named MBX1 failed over from EX1 to EX2. What command should you run? To answer, select the appropriate options in the answer area. Hot Area: Correct Answer: :

203 References: QUESTION 146 You have an Exchange Server 2013 organization that contains two servers named EX1 and EX2. EX1 and EX2 are members of a database availability group (DAG) named DAG1. Your organization contains several managed availability overrides. Both EX1 and EX2 have a copy of a mailbox database named MBX1. МBХ1 is active on EXl. You discover that MBX1 on EX2 has a status of ServiceDown. You need to restore the status of MBX1 on EX2 to healthy as quickly as possible. What should you do? A. Start the Microsoft Exchange Information Store Service. B. RunStart-Service MSExchangeIS. C. RunStart-Service MSExchangeRepl. D. Start the Microsoft Exchange Mail Replication Service. Correct Answer: A : The Microsoft Exchange Information Store Service manages the Exchange Information Store. This includes mailbox databases and public folder databases. If this service is stopped, mailbox databases and public folder databases on this computer are unavailable. If this service is disabled, any services that explicitly depend on it will fail to start. This service is dependent on the RPC, Server, Windows Event Log, and Workstation services. References: QUESTION 147 You have an Exchange Server 2013 organization that contains two Client Access servers named CAS1 and CAS2. You deploy a Network Load Balancing (NLB) cluster for Exchange client access. You configure all HTTPS connections to the cluster to be equally balanced between both servers. In the next few weeks, you plan to replace CAS1.

204 You need to ensure that all HTTP connections to the cluster are redirected to CAS2 only. The HTTPS connections must continue to be balanced equally between both servers. What should you do? A. Modify the cluster operation mode. B. Create a port rule for port 80. C. Set the priority of CAS1 to a higher number than CAS2. D. Set the priority of CAS2 to a higher number than CAS1. Correct Answer: B QUESTION 148 You deploy an Exchange Server 2013 organization to a test network for evaluation. You install the Mailbox server role and the Client Access server role on a server named ex01.contoso.com. You do not perform any other configurations. All of the ports from the Internet to ex01.contoso.com are open. You successfully connect to ex01.contoso.com from the Internet and from the internal network. You need to identify which types of Exchange Server clients will connect successfully to the organization without any further configurations. What should you identify? A. Internal IMAP clients B. Internal Microsoft Outlook connections C. Windows RT devices running the Mail app D. Android Phones using Activesync Correct Answer: B

205 QUESTION 149 Your company has two data centers. The data centers are located in Miami and New York. Five thousand users connect to the New York data center. One thousand users connect to the Miami data center. The data centers connect each other by using a dedicated high-speed WAN link. You plan to deploy two Exchange Server 2013 servers to each data center. You need to recommend a high-availability deployment strategy for the mailbox servers. The solution must ensure site resiliency. What is the best recommendation to achieve the goal? More than one answer choice may achieve the goal. Select the BEST answer. A. Deploy one database availability group (DAG). Add the servers to the DAG. Deploy a file share witness to the New York data center. Deploy an alternate file share witness to the Miami data center. B. Deploy one database availability group (DAG) to each data center. Add the servers to their respective DAG. Deploy a file share witness in Microsoft Azure. Deploy an alternate file share witness to each data center. C. Deploy one database availability group (DAG). Add the servers to the DAG. Deploy a file share witness in Microsoft Azure. Deploy an alternate file share witness to one of the data centers. D. Deploy one database availability group (DAG) to each data center. Add the servers to their respective DAG. Deploy a file share witness for each DAG to its respective local data center. Deploy an alternate file share witness to the other data center. Correct Answer: C QUESTION 150 HOTSPOT You have an Exchange Server 2010 organization that contains 10 Client Access servers and 20 Mailbox servers. The organization has several throttling policies deployed.

206 You need to identify which throttling policies will be used for different connection scenarios. In the table below identify which throttling policies will be used for each scenario. NOTE: Make only one selection in each row. Hot Area: Correct Answer:

207 QUESTION 151 You have an Exchange Server 2013 on-premises organization and a Microsoft Office 365 tenant. All mailboxes are hosted on-premises. You need to implement an archiving solution for all users. The solution must ensure that all mailbox content older than 18 months is moved to Personal Archives in Office 365. What should you implement? A. a retention policy and a retention policy tag (RPT) B. a retention hold and a retention policy tag (RPT) C. a retention policy and a personal tag D. a retention policy and a default policy tag (DPT) Correct Answer: D

208 QUESTION 152 You have an Exchange Server 2013 organization. You deploy an anti-spam appliance and you connect the appliance to the Exchange Server organization. You need to disable keyword filtering of messages that are received from the Internet. Which Windows PowerShell cmdlet should you use? A. Set-SendConnector B. Set-ReceiveConnector C. Set-ContentFilterConfig D. Set-EdgeSyncServiceConfig Correct Answer: C References: QUESTION 153 DRAG DROP You have an Exchange Server 2013 organization named contoso.com that contains several servers. The organization contains 3,000 mailboxes. You plan to deploy a hybrid coexistence solution and move 1,000 mailboxes to Exchange Online.

209 You also plan to configure all mail exchanger (MX) records for contoso.com to point to Exchange Online and to enable centralized mail transport. You need to identify how mail will be routed. What should you identify? To answer, drag the appropriate mail route to the correct option. Each mail route may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. Select and Place: Correct Answer:

210 QUESTION 154 Your network contains an Active Directory forest named contoso.com. The forest contains the domain controllers configured as shown in the following table. You plan to deploy an Exchange Server 2013 organization to the forest. All Exchange Server 2013 servers will be located in the West site.