Grandstream GXV GXV3611LL, 3601HD Admin Guide

Transcription

1 Grandstream GXV GXV3611LL, 3601HD Admin Guide Schmooze Com Inc.

2 Chapters How to Find the IP Address How to Find the MAC Address How to Set the Configuration Server How to Restore Factory Default How to Find the IP Address Quick Steps 1. With the device connected via Ethernet cable, click on the link below to download and install the free GSurf_Pro software from the Grandstream website Click the Search button and the detected devices will appear in the Output field. Index Model Version Device Name IP HTTP Port RTSP Port MAC 1 IPCAMERA 3611HD GXV3611HD :0B:82:41:68:4E Search Add IP Address Configuration Wifi Configuration Old IP Use DHCP New IP Ping Sub net mask Gate way Modify IP 3. The IP Address for this device will display in the IP column.

3 How to Find the MAC Address Quick Steps 1. Once the device is detected using the GSurf_Pro software, double click the device. Your browser will automatically open and link to the device IP and the web configuration page. Index Model Version Device Name IP HTTP Port RTSP Port MAC 1 IPCAMERA 3611HD GXV3611HD :0B:82:41:68:4E 2. From the home page, click on Configuration at the bottom left. The default username is admin and the default password is admin. The server requires a username and password. User Name: Password: admin Cancel Log In

4 3. Under on the left, click Status. Video & Audio Networking Wifi DDNS SIP Status Bo C Ba Fi Sy N M LA 4. The MAC Address will display under Network Status. GXV3611HD Administration Interface Home System Video & Audio Networking Wifi DDNS SIP Status System Statistics Product Model: Hardware Version: Part Number: Bootloader Version: Core Version: Base Version: Firmware Version: System Up Time Since: Network Status MAC Address: LAN IP Address: LAN Subnet Mask: LAN Default Gateway: PPPoE IP Address: PPPoE Status: DDNS Status: Wifi Status: SIP Registered: GXV3611HD V0.4B B hours 31 minutes 00:0B:82:41:68:4E Disconnected Disabled Disconnected Offline Camera Type Camera Type: Aptina, MT9D131 Pixels 1600*1200

5 How to Set the Configuration Server Quick Steps 1. Once the device is detected using the GSurf_Pro software, double click the device. Your browser will automatically open and link to the device IP and the web configuration page. Index Model Version Device Name IP HTTP Port RTSP Port MAC 1 IPCAMERA 3611HD GXV3611HD :0B:82:41:68:4E 2. From the home page, click on Configuration at the bottom left. The default username is admin and the default password is admin. The server requires a username and password. User Name: Password: admin Cancel Log In

6 3. Under on the left, click Maintenance. R User Management Maintenance SMTP FTP PTZ 4. Then under Firmware Upgrade and Provisioning, define the Config server path to your PBX. Generally this would be the IP address such as , used in our example. Press the Save button at the bottom. GXV3611HD Administration Interface Home User Management Maintenance SMTP FTP PTZ Alarm Server Alarm Event Motion Detection Syslog Restart the device Restart the device. Restart Restore the device Reset settings, except IP address, to factory default. Restore Firmware Upgrade and Provisioning Upgrade via: TFTP Firmware Server Path: /grandstream/2 Config Server Path: XML Config File Password: Record Live Storage Automatic Upgrade Interval(Minutes): Automatic Upgrade: 1080 Save

7 How to Restore Factory Default Quick Steps 1. Once the device is detected using the GSurf_Pro software, double click the device. Your browser will automatically open and link to the device IP and the web configuration page. Index Model Version Device Name IP HTTP Port RTSP Port MAC 1 IPCAMERA 3611HD GXV3611HD :0B:82:41:68:4E 2. From the home page, click on Configuration at the bottom left. The default username is admin and the default password is admin. The server requires a username and password. User Name: Password: admin Cancel Log In

8 3. Under on the left, click Maintenance. R User Management Maintenance SMTP FTP PTZ 4. Then under Restore the device, press the Restore button. GXV3611HD Administration Interface Home User Management Maintenance SMTP FTP PTZ Alarm Server Alarm Event Motion Detection Syslog Restart the device Restart the device. Restart Restore the device Reset settings, except IP address, to factory default. Restore Firmware Upgrade and Provisioning Upgrade via: TFTP Firmware Server Path: /grandstream/2 Config Server Path: XML Config File Password: Record Live Storage Automatic Upgrade Interval(Minutes): Automatic Upgrade: 1080 Save 5. The device is now reset to factory default.

9 Schmooze Com Inc. (920)