Release Notes CCNP: Building Scalable Internetworks Release 5.0(1)

Size: px

Start display at page:

Download "Release Notes CCNP: Building Scalable Internetworks Release 5.0(1)"

Georgiana Lane
5 years ago
Views:

1 Release Notes CCNP: Building Scalable Internetworks Release 5.0(1) Purpose Release 5.0(1) of Building Scalable Internetworks is the first maintenance release of the first course in the CCNP curriculum. These notes provide detailed information about this release, including curriculum content, known issues, updates and fixes, and support information. Release Content Component E-Learning Content Labs Case Studies Chapter Quizzes Description 8 modules 32 hands-on labs involving networking equipment 4 hands-on case studies involving networking equipment 8 module quizzes Chapter Exams 7 module exams covering modules 2-8 Final Exam 1 final exam covering chapters 1-8 Skills-Based Assessments 2 skills-based assessments to verify comprehension of course concepts Known Issues and Caveats Item Description Graphic Resolution This curriculum was designed for viewing with a screen resolution of 1024 X 768 or less. If viewed in a higher resolution, items may not display properly in the media area. Adobe Flash Player This curriculum was designed for viewing using Adobe Flash Player 8. Certain versions of Flash Player 8 may produce undesirable side effects. If you experience issues using Flash Player 8, we recommend upgrading to Flash Player 9. Content Delivery This course may be delivered through different channels. The primary delivery channels for the course are Academy Connection or a local Web server. The recommended method is to deliver the course through a local Web server. Secondary channels for delivery include installing the content directly to a workstation or PC. When contemplating the various delivery options, administrators and instructors should consider the diversity of platforms on which the course and its content must operate, and note the following guidelines: Select the download package (Windows or Linux zip file) that corresponds to your server/workstation operating system When possible, configure the content to be delivered through a local Web server when presenting to a class or over an academy LAN When installing the course on a standalone workstation or PC, please be aware of the following: o Disable all popup blocker software, toolbars, and applications o Accept any ActiveX warning messages when viewing course content o Navigate within the course window to avoid ActiveX pop-ups All contents are Copyright Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 1 of 8

2 Linux Operating System Support Course Navigation for Local Installation on a Workstation/PC that can be generated by certain combinations of operating systems and browsers This course uses the latest features in Flash technology. An installer was used to aid in the local deployment of this product to Windows users. However, for Linux users, the Flash Player security settings must be set manually to run the course through a browser on a local workstation/pc. Installing a standalone curriculum on a Linux operating system requires additional steps after unzipping the course to the file system. After the course is unzipped, visit the Macromedia s security settings page at: s_manager04.html After the page loads, some security options will be displayed. Verify that Always ask is selected. In the drop-down menu, select Add location, and then browse for the course folder. After the directory has been marked as secure, close all browser windows. Navigate to the course folder and click the index.html file to launch the course. Under certain conditions, Allow blocked content ActiveX popup messages may appear in a yellow bar at the top of the screen. If you receive these messages, select allow blocked content to continue. On the launch page for the course, select the launch course button to view the course content. Some users may receive a second Allow blocked content ActiveX popup message. Click the yellow bar at the top of the screen and choose allow blocked content to begin using the course. Note: To avoid excessive ActiveX popup messages, do not use the launch page chapter drop down menu to move between course chapters. Instead, use features such as the course index, back and next buttons, and location box at the bottom of the course content to navigate within the course browser window. For more information on these navigation features, we recommend reviewing the Course Tour, which can be accessed from the course launch page. To stop the information bar from blocking file and software downloads for Internet Explorer, we recommend the following steps: Open Internet Explorer. Select Tools > Internet Options Click the Security tab, and select Custom Level Do one or both of the following: o To turn off the Information bar for file downloads, scroll to the Downloads section and enable automatic prompting for file o downloads. To turn off the Information bar for ActiveX controls, scroll to the ActiveX controls and plug-ins section, and enable automatic prompting for ActiveX controls. Click OK, click Yes to confirm that you want to make the change, and then click OK again. To stop the information bar from blocking file and software downloads for Mozilla Firefox, we recommend the following steps: To access the Popup Blocker Options, select Tools > Options > Content. From there, you can do the following things: o Block pop-up windows: Deselect this option to disable the popup blocker altogether. o Exceptions: Use this option to specify which sites can display popups. You can allow or remove sites from the list. All contents are Copyright Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 2 of 8

3 Updates and Fixes This maintenance release includes the following fixes that address issues reported to the Global Support Desk: Section Reported Issue/Error Solution Links do not work. The Intelligent Information Network ing_solutions_intelligent_information_networ k_home.html What is IIN? tworking_solutions_market_segment_solutio n.html The Intelligent Information Network gent_information_network.htm What is IIN? Remove link Links do not work. SONA At- A-Glance uest/netsol/ns477/c643/cdccont_0900aecd8 039b324.pdf SONA At- A-Glance ral/ns340/ns517/ns477/net_brochure0900ae cd8039b324.pdf Links do not work. Cisco Enterprise Architectures - Poster uest/netsol/ns477/c643/cdccont_0900aecd8 039e0ea.pdf Cisco Enterprise Teleworker Architecture tworking_solutions_packages_list.html Cisco Enterprise Architectures - Poster ral/ns340/ns517/ns477/net_brochure0900ae cd8039e0ea.pdf Cisco Enterprise Teleworker Architecture 394/ns430/networking_solutions_packages_ list.html Links do not work. SAFE Blueprint 394/ns171/ns128/networking_solutions_pac kage.html All contents are Copyright Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 3 of 8

4 SAFE Blueprint 394/ns171/networking_solutions_packages_ list.html Links do not work. Identity Based Networking Services Solution 394/ns171/ns75/networking_solutions_sub_ solution_home.html The section title for 2.3 is "Implementing and Verifying EIGRP". Currently, it says "VLSM" in Figure 1 illustrates that router R1 has an ID of and is in AS 100 the EIGRP ID is the highest IP address on an active interface for this router. Identity Based Networking Services Solution 394/ns171/ns75/networking_solutions_sub_ sub_solution_home.html Change section title to "Implementing and Verifying EIGRP". "Figure 1 illustrates that router R1 has an ID of and is in AS 100 the EIGRP ID is the highest IP address on an active interface for this router." "Figure 1 illustrates that router R1 has an ID of and is in AS 100. The highest IP address assigned to a loopback interface is selected as the router ID. If there aren't any loopback addresses configured, the highest IP address assigned to any other interface is chosen as the router ID." Configuration error in graphic. ip summary-address eigrp Figure 1 needs to include IS-IS under MD5. ip summary-address eigrp HMAC MD5 Authentication IS-IS Configuration error in graphic. Figures 2 and 4, ip summary-address eigrp ip summary-address eigrp Error in Topology Diagram. VLAN1: /24 VLAN1: / / / Media has wrong subnet mask / / In lab 2-2 page 5 the last line of the All contents are Copyright Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 4 of 8

5 show ip route output is inconsistent with the lab In lab 2-2 page 1 the Topology Diagram has the incorrect subnet mask for the connection between R1 and R In lab 2-3 page 5 first row of the table the subnet mask does not match the configuration In lab 2-3 page 2 the first paragraph has a subnet mask which does not match the configuration In lab 2-3 page 1 the Topology Diagram has a subnet mask on R3 which does not match the configuration In lab 2-3 page 1 the Topology Diagram has a subnet mask on R1 which does not match the configuration In lab 2-3 page 5 second to last row of the table the subnet mask does not match the configuration. Overview Chapter 2 title on the graphic ("Overview of Scalable Internetworks") does not match chapter title in all other places, "EIGRP." In lab 3-1 page 2 the Fa0/0 interfaces on R3 should be configured with IP addresses from the /24 network not the /24 network In lab 3-1 page 2 the Fa0/0 interfaces on R1 should be configured with IP addresses from the /24 network not the /24 network In lab 3-1 page 2 the Fa0/0 interfaces on R2 should be configured with IP addresses from the /24 network not the /24 network. C /24 is directly connected, Serial0/0/0 C /29 is directly connected, Serial0/0/ / / / / / /24 Loopback0: /30 Loopback0: /24 Loopback0: /30 Loopback0: / / /24 Change title of graphic from: Module 2: Overview of Scalable Internetworks Module 2: EIGRP R3(config-if)# ip address R3(config-if)# ip address R1(config-if)# ip address R1(config-if)# ip address R2(config-if)# ip address All contents are Copyright Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 5 of 8

6 In lab 3-2 page 2 the IP address on R3 for the serial 0/0/1 interface is not consistent with the rest of the lab In lab 3-3 page 2 the IP address on R3 for the serial 0/0/1 interface is not consistent with the rest of the lab Router A: router ospf 1 network area 0 Router B: router ospf 50 network area 1 network area 0 R2(config-if)# ip address R3(config-if)# ip address R3(config-if)# ip address R3(config-if)# ip address R3(config-if)# ip address Router A: router ospf 1 network area 0 Router B: router ospf 50 network area 1 network area 0" Router A: router ospf 1 network area 0 Router B:router ospf 50 network area 1 network area Wrong IP address and mask. In the bottom box, IA Wrong IP address in figure 1 R2 config box Wrong IP address in figure 1 R1 config box Figure 3. This section is about EIGRP while the metric definition in this figure discusses RIP. IA "ip route " "ip route " " ip route " "ip route " Replace the metric field with the following definition: (Optional) Specifies the seed metric for the redistributed route. EIGRP needs five metrics when redistributing other protocols: bandwidth, delay, reliability, load, and MTU, respectively. Alternatively, this value could be applied for redistributed routes using the <b>default-metric</b> router configuration command. If a value is not specified then the routes will not be redistributed Error in command syntax in graphic. RTA(config-router)#distribute-list 24 out Typo in the configuration box under router ospf 1. RTA(config-router)#distribute-list 24 out s2 redistribute-list 2 out rip All contents are Copyright Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 6 of 8

7 In lab 5-3 page 2 the configuration takes place on the s0/0/0 interface while the topology diagram shows the s0/0/1 as the one that needs to be configured In lab 5-4 page 3 R3 should use serial 0/0/0 interface instead of serial 0/0/1 in order to match the diagram and the show ip route output. distribute-list 2 out rip R3(config-if)# interface serial 0/0/0 R3(config-if)# interface serial 0/0/1 R3(config-if)# interface serial 0/0/1 R3(config-if)# interface serial 0/0/ Wrong IP address in Figure 3 In Figure 3, router bgp neighbor remote-as router bgp neighbor remote-as router bgp neighbor remote-as router bgp neighbor remote-as Wrong link in lab. Change link on Page 6 to: ermserv/configuration/guide/tcfaapre_ps183 5_TSD_Products_Configuration_Guide_Cha pter.html Wrong IP address in lab. ip address ip address Error in Figure 2. In Figure 2, "0 = multicast address and 1 = unicast address " "0 = unicast address and 1 = multicast address" U/L bit definition is incorrect. "If the U/L bit is set to 0, the address is locally administered. The network administrator has overridden the manufactured address and specified a different address" "If the U/L bit is set to 0, the address is universally administered. The IEEE, through the designation of an ISP, has administered the address." U/L bit definition is incorrect. "If the U/L bit is set to 1, the IEEE, through the designation of an ISP, has administered the address." "If the U/L bit is set to 1, the address is locally administered. The network administrator has overridden the manufactured address and specified a different address." Error in description of locally All contents are Copyright Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 7 of 8

8 administered address. "Therefore, to make this address a universally administered address, our IPv6 address 0090:27FF:FE17:FC0C would actually become 0290:27FF:FE17:FC0C." "Therefore, to make this address a locally administered address, our IPv6 address 0090:27FF:FE17:FC0C would actually become 0290:27FF:FE17:FC0C." Command syntax error. In Figure 2, Router(config-rtr)#area range :0DB8::/48) Error in IP address in command in Figure 1. Router(config-rtr)#area 1 range 2001:0DB8::/48 In Figure 1, Router1# tunnel destination Router1# tunnel destination Error in IP address in lab. R3(config-if)# ipv6 address FEC0::2:1/112 R3(config-if)# ipv6 address FEC0::3:1/112 Support For general assistance with curricula, classroom, or program issues, please contact the Global Support desk through the Academy Support site. To access this site, log into Academy Connection and click Help at the top of the page, then select Academy Support. Curriculum or assessment bugs and errors should be submitted through the Curriculum and Assessment Quality Support site. To access this site, log into Academy Connection and click Help at the top of the page, then select Curriculum and Assessment Quality Support. Select the Contact Assessment Team or Contact Curriculum Team tab, depending on the nature of the problem you are reporting. Provide as much detail as possible and then click Submit. Copyright 2008 Cisco Systems, Inc. All rights reserved. Cisco, the Cisco logo, Cisco Systems, CCNA, and Networking Academy are registered trademarks or trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries. All other trademarks mentioned in this document are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (0802R) All contents are Copyright Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 8 of 8

Release Notes CCNA Exploration: Routing Protocols and Concepts Release

Release Notes CCNA Exploration: Routing Protocols and Concepts Release 4.0.5.0 Purpose Release 4.0.5.0 of Routing Protocols and Concepts is the fifth maintenance release of the second course in the CCNA