Validity 1. Improvements in STEP 7 2. Improvements in WinCC 3 SIMATIC. Readme. Readme

Size: px

Start display at page:

Download "Validity 1. Improvements in STEP 7 2. Improvements in WinCC 3 SIMATIC. Readme. Readme"

Cory Cain
5 years ago
Views:

1 Validity 1 Improvements in STEP 7 2 SIMATIC Improvements in WinCC 3 02/2015

2 Legal information Warning notice system This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are graded according to the degree of danger. DANGER indicates that death or severe personal injury will result if proper precautions are not taken. WARNING indicates that death or severe personal injury may result if proper precautions are not taken. CAUTION indicates that minor personal injury can result if proper precautions are not taken. NOTICE indicates that property damage can result if proper precautions are not taken. If more than one degree of danger is present, the warning notice representing the highest degree of danger will be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to property damage. Qualified Personnel The product/system described in this documentation may be operated only by personnel qualified for the specific task in accordance with the relevant documentation, in particular its warning notices and safety instructions. Qualified personnel are those who, based on their training and experience, are capable of identifying risks and avoiding potential hazards when working with these products/systems. Proper use of Siemens products Note the following: Trademarks WARNING Siemens products may only be used for the applications described in the catalog and in the relevant technical documentation. If products and components from other manufacturers are used, these must be recommended or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and maintenance are required to ensure that the products operate safely and without any problems. The permissible ambient conditions must be complied with. The information in the relevant documentation must be observed. All names identified by are registered trademarks of Siemens AG. The remaining trademarks in this publication may be trademarks whose use by third parties for their own purposes could violate the rights of the owner. Disclaimer of Liability We have reviewed the contents of this publication to ensure consistency with the hardware and software described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the information in this publication is reviewed regularly and any necessary corrections are included in subsequent editions. Siemens AG Division Digital Factory Postfach NÜRNBERG GERMANY P 02/2015 Subject to change Copyright Siemens AG All rights reserved

3 Table of contents 1 Validity Improvements in STEP Improvements in Update Improvements in Update Improvements in Update Improvements in Update Improvements in Update Improvements in Update Improvements in WinCC Improvements in Update Improvements in Update Improvements in Update Improvements in Update Improvements in Update Index... 23, 02/2015 3

5 Validity 1 Validity This update is valid for the following products: STEP 7 Basic V13 STEP 7 Professional V13 WinCC Basic V13 WinCC Comfort V13 WinCC Advanced V13 WinCC Professional V13 Note If you modify your system after installing the update with the product DVD, you will have to perform the update again., 02/2015 5

7 Improvements in STEP Improvements in Update 6 Update 6 contains the following improvements and changes: Hardware configuration When migrating an S CPU from firmware version V3 to V4, the input filter for all digital inputs (on-board and signalboard DI) which are assigned to a high-speed counter HSC are set to 0.8 ms. Chinese interface language The interface texts have been optimized. Downloading blocks to device The downloading of modified objects has been optimized. 2.2 Improvements in Update 5 Update 5 has been withdrawn. Please install Update Improvements in Update 4 Update 4 contains the following improvements and changes: Chinese interface language The Chinese language interface for TIA Portal Update 3 is supported. PLCSIM V13 With PLCSIM V13, you can also simulate the new S modules with firmware version 1.6 based on the firmware version 1.5 functionality. The ET200 SP CPU is supported as of PLCSIM V13 SP1., 02/2015 7

8 Improvements in STEP Improvements in Update Improvements in Update 3 Update 3 contains the following improvements and changes: Pulling and plugging a central module for the CPUs 1510SP-1 and 1512SP-1 PN Contrary to the information in the online help, pulling and plugging a central module for the CPUs 1510SP-1 PN and 1512SP-1 PN does not result in CPU STOP. When you select optimized start information in the Pull/Plug OB as the structure of start information, the values B#16#51, 54, 55, 56, 57 and 58 of the fault_id tags apply not only for PROFINET IO modules and submodules, but also generally for IO modules and IO submodules. The same applies to the Fault_ID tag in the TI_PlugPullModule data structure of the TINFO parameter in the RALRM instruction. When you select S7-300 and S7-400 CPUs in the Pull/Plug OB as the structure of start information, the values B#16#51, 54, 55, 56, 57 and 58 of the OB83FLT_ID tags apply not only for PROFINET IO modules and submodules, but also generally for IO modules and IO submodules. New modules The following new modules are supported: Article number Description FW version 6ES QD00-0AB0 6ES NB00-0AB0 6ES QE00-0AB0 AI 4xU/I/RTD/TC ST AQ 2xU/I ST AI/AQ 4xU/I/RTD/TC / 2xU/I ST 6ES AK00-0AB0 6ES AL00-0AB0 6ES AM00-0AB0 6ES AN00-0AB0 6ES AP00-0AB0 6ES AP00-0AB0 CPU PN CPU PN CPU PN CPU PN/DP CPU PN/DP CPU PN/DP 6ES FK00-0AB0 6ES FL00-0AB0 6ES FM00-0AB0 6ES FN00-0AB0 6ES FP00-0AB0 6ES FP00-0AB0 CPU 1511F-1 PN CPU 1513F-1 PN CPU 1515F-2 PN CPU 1516F-3 PN/DP CPU 1517F-3 PN/DP CPU 1518F-4 PN/DP 6ES CG00-0BA0 ET 200SP TM Timer DIDQ 10x24V 8, 02/2015

9 Improvements in STEP Improvements in Update 3 Article number Description FW version 6ES DJ00-0AB0 6ES DK00-0AB0 6ES DA00-0AB0 CPU 1510SP-1 PN CPU 1512SP-1 PN CM PROFIBUS DP 6ES GD00-0BA1 6ES HD00-0BA1 6ES HD00-0BA1 6ES BF00-0BA0 6ES BD20-0BA0 6ES HD00-0BB0 6ES BF00-0BA0 6ES PA00-0BD0 ET 200SP AI 4xI 2-/4-wire ST ET 200SP AI 4xU/I 2-wire ST ET 200SP AQ 4xU/I ST ET 200SP DI 8x24VDC ST ET 200SP DQ 4x24VDC/2A ST ET 200SP RQ 4x120VDC/230VAC/5A NO ST ET 200SP DQ 8x24VDC/0.5A ST ET 200SP AI EnergyMeter ST V 1.1 V 1.1 V 1.1 V 1.1 V 1.1 V 1.1 V 1.1 V 2.0 S7-OpenMODBUS/TCP blocks (S7-300/400 PN CPUs) The S7-OpenModbusTCP PN communication library is also available in the TIA Portal. This library requires an additional license. You can find more information in the Siemens Industry Online Support under the following Internet link: ( %2f&func=cslib.csinfo&siteid=csius&groupid= &extranet=standard&viewreg=WW&n odeid0= &objaction=csopen) Availability of Support Packages via TIA Updater The Automation Software Updater (ASU) function in the TIA Updater now also supports Hardware Support Packages. Availability of Service Packs via TIA Updater The Automation Software Updater (ASU) function in the TIA Updater now also supports provided Service Packs. Working with the TIA Portal Stability when working with the TIA Portal has been improved. Forwarding block parameters (S7-300/400) The rules for forwarding block parameters have been corrected in STL for the instructions MIN, MAX, LIMIT and SEL, which can lead to compilation errors in some cases., 02/2015 9

10 Improvements in STEP Improvements in Update 2 S Motion Control optimization After the start of a test step of the optimization, the axis is decelerated with the configured maximum delay after expiration the measurement period. In order for the trace function to record a test step of the optimization, the movement must continue for at least two application cycles of the MC Servo OB. S Motion Control - Simulation To traverse an axis without a drive in simulation mode, selection the entry "Simulative PROFIdrive drive" in the "Simulation" list under "Configuration > Basic parameters". Then save the project and load the software to the CPU in STOP mode. 2.5 Improvements in Update 2 Update 2 contains the following improvements and changes: Working with the TIA Portal Stability when working with the TIA Portal has been improved. Expansion of PLC tags during operation with a CPU of the S series The communication connection to the HMI panel is maintained when creating new PLC tags in a CPU of the S V2.x and V3.x series and then loading to the device. 2.6 Improvements in Update 1 Update 1 contains the following improvements and changes: Detailed comparison of blocks A detailed comparison is also possible with different block interfaces. Moving networks with drag-and-drop Networks can also be moved with drag-and-drop. Working with the TIA Portal Stability when working with the TIA Portal has been improved. 10, 02/2015

11 Improvements in STEP Improvements in Update 1 Working with PLCSim when project names contain Chinese characters PLCSim can now be opened directly from the TIA Portal, even if a project name contains Chinese characters., 02/

13 Improvements in WinCC Improvements in Update 6 Update 6 contains the following improvements and changes: Siemens Security Advisory for WinCC Runtime Professional You can find more information on the resolved security vulnerability in Siemens Security Advisory SSA ( System functions at function keys If the two events "Press key" and "Release key" are configured at a screen-specific function key (softkey), the configured functions will be triggered correctly on the target system. The same applies if the two events are triggered implicitly by the function "SetBitWhileKeyPressed". Please contact Customer Support if you use the devices OP 77B and OP 177B and have configured function lists for an F-key as well as for a K-key in a picture. Screen change with KP400 Comfort A system function for screen change configured to a cursor key is correctly executed. Screen objects on Comfort Panels and Runtime Advanced The behavior, display and operation of screen objects in runtime has been improved for panels and Runtime Advanced: On Comfort Panels and for Runtime Advanced, the display of lines with the width of one pixel has been improved. In the recipe view, readability and behavior during during automatic synchronization have been improved. The readability for tag output fields in the alarm view has been improved. Downloading projects The panel does not have to be restarted after changing the connection settings and downloading the project. The password of the Web server is not reset after the project is downloaded., 02/

14 Improvements in WinCC 3.2 Improvements in Update 5 Communication via OPC The OPC UA server has been adapted even more optimally to the OPC standards. Runtime can be exited even when a communications partner is connected via OPC. See also Siemens CERT ( 3.2 Improvements in Update 5 Update 5 has been withdrawn. Please install Update Improvements in Update 3 Note Update 3 is a requirement for the installation of Hardware Support Package HSP0098 HMI Basic Panel 2nd Generation. Update 3 contains the following improvements and changes: Device replacement The routines for device-specific adaptation of object properties have been improved for a device replacement. Upgrading devices The display of vector-based graphics after upgrading the device version has been improved. PLC code display The display of transitions has been improved in the PLC code display object for PLC programs which were programmed with the programming language FBD. Faceplates Behavior has been improved in faceplates when both a static value and dynamization with a tag are configured for a property of the faceplate. 14, 02/2015

15 Improvements in WinCC 3.3 Improvements in Update 3 Screen objects on Comfort Panels and Runtime Advanced The behavior, display and operation of screen objects in runtime has been improved for Comfort Panel and Runtime Advanced: Operation of horizontal and vertical scroll bars Date/time field: Refresh display after a screen change I/O field: Display when styles are used Trend view: Refresh display after a screen change Trend view: Use of tags for starting time and end time Recipe view: Representation of the table grid Button: Animation of the background color for the event "Pressed" Symbolic I/O field: Animation of visibility Symbolic I/O field: Representation of the button to display the selection list Symbolic I/O field: Use of GMP-relevant tags Loading to a Comfort Panel The routines for loading to a Comfort Panel were improved. Alarm logs The routines for reading alarms from logs have been improved. Basic Panel 2nd Generation For Basic Panel 2nd Generation the behavior and the display in runtime has been improved Systems functions that are configured on function keys are executed correctly. With the system function SetBitWhileKeyPressed, the bit is correctly reset after the key is released. The display of language-dependent graphics is a graphics list works with graphic IO field, button and switch. The routines for multiplexing tags have been improved. User-specific rights can also be used for a larger number of configured user groups. Availability of Support Packages via TIA Updater The Automation Software Updater (ASU) function in the TIA Updater now also supports Hardware Support Packages. Availability of Service Packs via TIA Updater The Automation Software Updater (ASU) function in the TIA Updater now also supports provided Service Packs., 02/

16 Improvements in WinCC 3.4 Improvements in Update Improvements in Update 2 Update 2 contains the following improvements and changes: PLC code display Some functions have been extended for displaying the current program status of PLC programs for the PLC code display object. S7-GRAPH overview A few errors were corrected in displaying the current program status of PLC sequencers for the S7-GRAPH overview object. System diagnostics view The runtime characteristics have been improved for the system diagnostics display object. Global screen An error in the global screen was corrected. This error could occur in conjunction with projects migrated from V12 and the new Basic Panel. Copying line objects When a line object is copied from a project migrated from V12 to a new project, all properties of the line object are retained. Loading to devices with an incorrect address The behavior during loading of a project has been improved for the following situations: When a configured IP address and the actual IP address of the device differ When a configured Profibus DP address and the actual Profibus DP address of the device differ Migrating WinCC flexible projects The migration of icons into templates has been improved. Communication with a PLC that was configured with STEP 7 V5.2 The communication with PLCs that were configured with STEP 7 V5.2 has been improved, especially in connection with T-PLCs and IM151 PLCs 16, 02/2015

17 Improvements in WinCC 3.4 Improvements in Update 2 Communication via AR_SEND An error with communication via AR_Send that occurred when the network connection to the controller failed has been corrected. WinCC Runtime startup on operating systems with Asian languages The "Apply" button is fully visible on operating systems in the languages Chinese (China), Chinese (Taiwan), Korean and Japanese. OpenViewerIECPLByCall function The correct declaration of the function is BOOL OpenViewerIECPLByCall ( DWORD dwflags, LPCTSTR lpszserverprefix, LPCTSTR lpszpicturename, LPCTSTR lpszobjectname, LPCTSTR lpszcpuname, LPCTSTR lpszcontainingblock, LPCTSTR lpszcalledblock, LPCTSTR lpszpin, LPCMN_ERROR lpdmerror); Parameters dwflags Bit array in which the individual values are ORed bit-by-bit. dwflags should be 0 by default. IECPLVIEWER_PIN_SUBSTRING_SEARCH=0x0001: A substring is sought in the search for the pin name, i.e. the pin name starts with the string passed in lpszpin. If this bit is not set, the complete pin name is compared to lpszpin. lpszserverprefix The parameter is reserved for later upgrades. lpszpicturename Name of the screen with the PLC code display. lpszobjectname Name of the PLC code display. lpszcpuname Name of the S7 CPU. The name is identical to the station name displayed in the project tree in the TIA Portal., 02/

18 Improvements in WinCC 3.4 Improvements in Update 2 lpszcontainingblock Name of the block to be opened and displayed or name of the instance of an FB. The following can be used as the name: Name of a single instance DB. Its FB is then displayed. Example "Station1" Name of a multi-instance in an instance DB. Its FB is then displayed. When multi-instance name paths are specified, these are data hierarchies such as those displayed in the DB editor, and not the call structure. The first part of the name ("Line1") does not need to be enclosed in quotes because this is a global icon, as can be recognized from the context. Quotation marks are required for the individual name components when special characters such as spaces, periods etc. occur in them. Example: "Line1.Cell1.Station1" Name of an FC or OB Using the name of an FB is not allowed. lpszcalledblock Name of the local or global instance that is called in the code block belonging to lpszcontainingblock. For local instances, the hash sign # must be specified here, for example, "#feeder1". For global instances, the global name must be specified here without hash sign #, for example, "feeder3". Using the name of an FC is allowed. If lpszcalledblock is called several times within lpszcontainingblock or its FB, execution always jumps to the first call of lpszcalledblock. lpszpin Name of the input pin of lpszcalledblock. The parameter is used to display the network interconnected to the input pin in the PLC code display. lpdmerror Pointer to the data of the extended error message in the CMN_ERROR structure. The system writes error information to this structure if an error occurs. OpenViewerIECPLByAssignment function The correct declaration of the function is BOOL OpenViewerIECPLByAssignment ( DWORD dwflags, LPCTSTR lpszserverprefix, LPCTSTR lpszpicturename, LPCTSTR lpszobjectname, LPCTSTR lpszcpuname, LPCTSTR lpszcontainingblock, LPCTSTR lpszoperand, LPCMN_ERROR lpdmerror); 18, 02/2015

19 Improvements in WinCC 3.4 Improvements in Update 2 Parameters dwflags Bit array in which the individual values are ORed bit-by-bit. dwflags should be 0 by default. lpszserverprefix The parameter is reserved for later upgrades. lpszpicturename Name of the screen with the PLC code display. lpszobjectname Name of the PLC code display. lpszcpuname Name of the S7 CPU. The name is identical to the station name displayed in the project tree in the TIA Portal. lpszcontainingblock Name of the block to be opened and displayed or name of the instance of an FB. The following can be used as the name: Name of a single instance DB. Its FB is then displayed. Example "Station1" Name of a multi-instance in an instance DB. Its FB is then displayed. When multi-instance name paths are specified, these are data hierarchies such as those displayed in the DB editor, and not the call structure. The first part of the name ("Line1") does not need to be enclosed in quotes because this is a global icon, as can be recognized from the context. Quotation marks are required for the individual name components when special characters such as spaces, periods etc. occur in them. Example: "Line1.Cell1.Station1" Name of an FC or OB Using the name of an FB is not allowed. lpszoperand Name of a local or global operand to which an assignment is made. Name of the local or global instance that is called in the code block belonging to lpszcontainingblock. For local operands, the hash sign # must be specified here. For global operands, the global name must be specified without hash sign #. If lpszoperand is written several times within lpszcontainingblock or its FB, execution always jumps to the first write access of lpszoperand. lpdmerror Pointer to the data of the extended error message in the CMN_ERROR structure. The system writes error information to this structure if an error occurs., 02/

20 Improvements in WinCC 3.4 Improvements in Update 2 OpenViewerS7GraphByBlock function The correct declaration of the function is BOOL OpenViewerS7GraphByBlock ( DWORD dwflags, LPCTSTR lpszserverprefix, LPCTSTR lpszpicturename, LPCTSTR lpszobjectname, LPCTSTR lpszcpuname, LPCTSTR lpszblock, DWORD dwstepnumber, LPCMN_ERROR lpdmerror); Parameters dwflags Bit array in which the individual values are ORed bit-by-bit. dwflags should be 0 by default. lpszserverprefix The parameter is reserved for later upgrades. lpszpicturename Name of the screen with the PLC code display. lpszobjectname Name of the PLC code display. lpszcpuname Name of the S7 CPU. The name is identical to the station name displayed in the project tree in the TIA Portal. lpszblock Instance name of the S7-GRAPH block to be displayed. If special characters such as spaces, periods, etc. occur in the name, quotation marks need to be used. dwstepnumber Number of the step to be displayed. dwstepnumber=0 automatically searches for the active step and enables "Track active step" mode. lpdmerror Pointer to the data of the extended error message in the CMN_ERROR structure. The system writes error information to this structure if an error occurs. 20, 02/2015

21 Improvements in WinCC 3.5 Improvements in Update Improvements in Update 1 Update 1 contains the following improvements and changes: New images for Comfort Panels New images are available with this update. With the new images, restoring a backup is always possible. The operating system should be updated for all devices with device version V13. To activate the operating system of the target device, follow these steps: 1. Install the update on the Engineering System. 2. Open the project in the Engineering System. 3. Select the "Update operating system" command from the menu under "Online > HMI device maintenance" on the configuration PC in WinCC. The "SIMATIC ProSave [OS-Update]" dialog opens. The path to the image is preset. 4. If required, you can select a different path for the image that you want to transfer to the HMI device. 5. Click "Update OS". 6. Compile the device. 7. Load the project to the device. Please note that the operating system is only updated if version " " is specified in the device configuration. Scroll bar of a combobox The scroll bar in a combobox with multiple entries can be operated. Tag prefix When using multiple screen windows in one screen, the evaluation of a tag prefix has been improved for certain system functions, e.g. SetBit, ResetBit. Client/server: Stop Runtime Runtime is stopped correctly in a client/server system, even when the Runtime of a client is ended before the Runtime of a server in the case of a failure in the connection to the server. Redundant systems: Synchronizing logs In a redundant system, the logs are also synchronized correctly after a delta download and subsequent full download., 02/

22 Improvements in WinCC 3.5 Improvements in Update 1 Redundant systems: Synchronizing recipe data In a redundant system, recipe data are also synchronized correctly following a network failure. 22, 02/2015

23 Index C Chinese, 7, 7 D Downloading, 7 G GUI, 7 H Hardware, 7 I Interface, 7, 02/

24 Index 24, 02/2015

Validity 1. Improvements in STEP 7 2. Improvements in WinCC 3 SIMATIC. Readme. Readme

Validity 1. Improvements in STEP 7 2. Improvements in WinCC 3 SIMATIC. Readme. Readme Validity 1 Improvements in STEP 7 2 SIMATIC Improvements in WinCC 3 07/2014 Legal information Warning notice system This manual contains notices you have to observe in order to ensure your personal safety,