Structural Design Codes Verifier
|
|
- Marylou Cain
- 5 years ago
- Views:
Transcription
1 Wouter van den Bos, SDC Verifier Owner Structural Design Codes Verifier Femap Symposium 2014 May 14-16, Atlanta, GA, USA FEMAP SYMPOSIUM 2014 Discover New Insights
2 What is SDC Verifier? The goal of SDC Verifier is checking structures according to standards and report generation. Page 2
3 Practical use of SDC Verifier Recognition tools Beam Member Y and Z Length Plate Length and Width Weld Classification (Customizable) Checks Reporting Page 3
4 Femap and SDC Verifier Model Data; Boundary Conditions; Analysis Results; Plotting; Export Extra Results; Apply Complicated Loads; Page 4
5 SDC Verifier Separate and Embed Mode Separate GUI Embedded Page 5
6 History January 2009 : December 2011: Start of SDC Verifier program development SDC Verifier 1.3 first commercial version Key features: report generation, standard based calculation structure, fatigue. April 2012: SDC Verifier 2.0 Key features: report generation, report previewer, overall tables, custom checks July 2012: SDC Verifier 2.1 Key features: report designer improvements,plate buckling, rule base selector. November 2012 : SDC Verifier Key features: beam length recognition(basic), panel finder(basic), API 2A standard September 2013: SDC Verifier 3.0 Key features: model recognition tools, standard checks, SDC embedded in Femap April 2014: SDC Verifier 3.5 Key features: weld recognition, histogram, opened plate buckling, Plate Buckling DNV2010; Page 6
7 19 Individual loads 18 Load Sets 3 Load Groups Load combinations: example from Standard A lot of loads and combinations should be checked according to standards. SDC Verifier implements: Individual Loads; Load Sets; Load Groups. Page 7
8 Load combinations: Add/Edit Multiple Create/edit few Load combinations at once. Import Load Sets or Load Groups from MS Excel Page 9
9 Tools Panel Finder; Weld Finder; Beam Member Finder; Complicated Loads: Wind, Buoyancy and Tank Load; Moment Shear and Force; Rule Based Selector. Page 10
10 Panel finder Sections X vs Elements Count Plates plot Frames Page 11
11 Weld finder Recognizes all welds and updates weld direction automatically. Fatigue check on single weld Fatigue check EN13001 Check static weld strength (eurocode) Page 12
12 Beam Member Finder Helps to define beam length. Can be used in Beam Buckling Check and custom checks. Beam Length Plot User can modify joints manually or even define own (user) joints. Types of Joints Page 13
13 Example: AISC Buckling Check Buckling check Beam members Length of beam members Page 14
14 Wind and Buoyancy Loads Wind Buoyancy (water level calculation) Pressure (depend on height) Water pressure including wave parameters. Page 15
15 Tank Ballast Load Tank Load Global and local waterline Accelerations on tank content included Applied force and volume Height along vertical axis Page 16
16 Moment and Shear Force At section Shear Force Moment Page 17
17 Rule based Selector Rule Types: - Materials; - Properties; - Groups; - Coordinate; - Element Types; - Element Shapes. Operations: - Add; - Remove; - Exclude; - Reselect. Always Up to date Coordinate Rule Page 18 Element Types Rule
18 Standards and Custom Checks Fatigue check according to different methods and standards; Plate Buckling according to ABS and DNV standards; Custom Checks (anything can be checked as long as the formula is known); Custom Checks Examples; API RP 2A Tubular Joint Check; Page 19
19 Fatigue Check example (mean stress correction) Used by standards as DIN 15018, FEM 1.001, NEN 2018/2019 and FKM Fatigue Allowable Stress Design (Goodman relation) Allowable Stress depends on classification For single stresses Combined Element Group 6 more than 2 millions cycles K4 welds example Page 20
20 Fatigue Example Allowable Fatigue Stress depends on Weld Class and Kappa=Smin/Smax Notch group/weld Class Weld Class K3 - Green Weld Class K2 - Red Allowable Stress vs Kappa Utilization Factor (Smax/Sallow) Page 21
21 Plate Buckling Check (ABS, DNV) Automatically convert element stresses into plate direction. Automatically recognized dimensions of plates Results over sections. Values which do not pass the check are highlighted in red. Page 22
22 SDC Verifier is customizable If check is missing use custom check Page 23
23 Simple example 1: Static Stress Check Lloyds criteria Different factors for different Stress directions Page 24 Overall Utilization Factor
24 API RP 2A Tubular Joint Check Recognize Joint Type (based on Forces) Recognize Brace, Chord and Gap Page 25
25 SDC Reporting Standard reports Report Wizard; Report Designer. Report Wizard easy step by step report Report Designer previewer. Advanced report Page 26
26 Report Generation in Designer Export To Word/pdf Toolbox with all available items Menu structure report Context menu Extra Items Manage /preview etc Properties items Preview document Page 27
27 Open with template: re-use calculation First model (template) New Model Two models. Same report 31 Page 31
28 Conclusions SDC Verifier the add-on for: Verification of structure according to standards Simple application of complicated loads Translation of FEM results in (complicated) code checking results Complete documentation of model and results Focus on engineering lets SDC Verifier do the bookkeeping Use 45 days trial to check it yourself (download SDC Verifier on and request trial at Page 32
29 Standards in progress Plate Buckling DNV RP-C (Stiffener and Girders checks); AISC LRDF (tension and compression checks are already implemented); EN 13001; F.E.M ; Plate Buckling ABS 2013; Eurocode 3; Suggestions? Page 33
30 Improvements Panel Finder improvements: recognition of Panels and plates (currently only plates), stiffeners and girders; Update Plate Buckling Calculation approach: use plate edge stresses; Weld Finder: Recognition of Weld Types; Reading op2 files; Unit system; Suggestions? Page 34
Structural Design Code Verifier. Be an analyst not an admin
Structural Design Code Verifier Be an analyst not an admin SDC Verifier Embedded 2 Separate GUI What is SDC Verifier? The goal of SDC Verifier is checking structures according to standards and report generation.
More informationStructural Design Code Verifier. Version 3.0
Structural Design Code Verifier Version 3.0 What is SDC Verifier? The goal of SDC Verifier is checking structures according to standards and report generation. 2 SDC Verifier Embedded into Femap 3 Load
More informationLoads Recognition Tools Checks Reports
Loads Recognition Tools Checks Reports SDC Verifier is a powerful postprocessor program with an advanced calculation core which works seamlessly with Siemens multi-solver, FEA software suite Femap. SDC
More informationSDC Verifier is a powerful postprocessor program with an advanced calculation core which works seamlessly with Siemens multi-solver, FEA software
SDC Verifier is a powerful postprocessor program with an advanced calculation core which works seamlessly with Siemens multi-solver, FEA software suite Simcenter 3D. SDC Verifier & Simcenter 3D SDC Verifier
More informationSDC Verifier is a powerful post-processor extension for Simcenter 3D which automates the full FEA workflow.
SDC Verifier is a powerful post-processor extension for Simcenter 3D which automates the full FEA workflow. SDC Verifier & Simcenter 3D SDC Verifier is a powerful post-processor program that is used to
More informationSDC Verifier or the Structural Design Code Verifier is a powerful postprocessor program with an advanced calculation core which works seamlessly with
SDC Verifier or the Structural Design Code Verifier is a powerful postprocessor program with an advanced calculation core which works seamlessly with Siemens multi-solver, FEA software suite Femap. Load
More information1
SDC Verifier or the Structural Design Code Verifier is a powerful postprocessor program with an advanced calculation core which works seamlessly with Siemens multi-solver, FEA software suite Femap. www.sdcverifier.com
More informationTutorial API 2A RP - July version 5.0
Tutorial API A RP - July 993 5.0.08 version 5.0 Content In this tutorial, API A RP Beam Design Checks are reviewed in details. A beam model of a steel frame has been used as a start FEM model. Beam member
More informationWORKSHOP 6.3 WELD FATIGUE USING NOMINAL STRESS METHOD. For ANSYS release 14
WORKSHOP 6.3 WELD FATIGUE USING NOMINAL STRESS METHOD For ANSYS release 14 Objective: In this workshop, a weld fatigue analysis on a VKR-beam with a plate on top using the nominal stress method is demonstrated.
More informationOverview of the MAESTRO System
Overview of the MAESTRO System 1 Historical Highlights Early Stages of Development and Fielding Professor Owen Hughes conceived and developed MAESTRO Wrote and published (Wylie/SNAME) textbook Ship Structural
More informationWORKSHOP 6.4 WELD FATIGUE USING HOT SPOT STRESS METHOD. For ANSYS release 14
WORKSHOP 6.4 WELD FATIGUE USING HOT SPOT STRESS METHOD For ANSYS release 14 Objective: In this workshop, a weld fatigue analysis on a VKR-beam with a plate on top using the nominal stress method is demonstrated.
More informationmidas Civil Advanced Webinar Date: February 9th, 2012 Topic: General Use of midas Civil Presenter: Abhishek Das Bridging Your Innovations to Realities
Advanced Webinar Date: February 9th, 2012 Topic: General Use of midas Civil Presenter: Abhishek Das Contents: Overview Modeling Boundary Conditions Loading Analysis Results Design and Misc. Introduction
More informationDesign of Offshore Structures using STAAD.Pro and STAAD.Offshore
Design of Offshore Structures using STAAD.Pro and STAAD.Offshore By RAM/STAAD Solution Center 15 January 2007 Design of Offshore Structures using STAAD.Pro and STAAD.Offshore STAAD.Pro is a general purpose
More informationFATIGUE ASSESSMENT OF TYPICAL DETAILS OF VLGC
FATIGUE ASSESSMENT OF TYPICAL DETAILS OF VLGC P. Cambos, BUREAU VERITAS, France C. Chauviere, BUREAU VERITAS, France SUMMARY This paper mainly focuses on the fatigue assessment of the structural details
More informationSteel connections design According to EC3. User s Manual
Steel connections design According to EC3 User s Manual Version 1.0 April 2017 Contents 1 COPYRIGHT... 5 2 DISCLAIMER... 6 3 PRAXIS GENERAL DESCRIPTION... 7 4 BASE PLATE CONNECTION... 10 4.1 Column...
More informationGlobal to Local Model Interface for Deepwater Top Tension Risers
Global to Local Model Interface for Deepwater Top Tension Risers Mateusz Podskarbi Karan Kakar 2H Offshore Inc, Houston, TX Abstract The water depths from which oil and gas are being produced are reaching
More informationPTC Creo Simulate. Features and Specifications. Data Sheet
PTC Creo Simulate PTC Creo Simulate gives designers and engineers the power to evaluate structural and thermal product performance on your digital model before resorting to costly, time-consuming physical
More informationNAUTICUS HULL RELEASE DOCUMENT
NAUTICUS HULL RELEASE DOCUMENT JANUARY 2013 RELEASE Copyright 2013 Det Norske Veritas AS All rights reserved. No part of this book may be reproduced, in any form or by any means, without permission in
More informationRelease Notes for RISATower Version 4.7
Release Notes for RISATower Version 4.7 November 16, 2006 This document describes Version 4.7 update for RISATower. Please install this upgrade at your earliest convenience. Stand Alone Installation Instructions.pdf
More informationAdvanced model of steel joints loaded by internal forces from 3D frame structures
Advanced model of steel joints loaded by internal forces from 3D frame structures Lubomír Šabatka, IDEA RS s.r.o František Wald, FSv ČVUT Praha Jaromír Kabeláč, Hypatia Solutions s.r.o Drahoslav Kolaja,
More informationWhat's New Advance Design 2016
What's New Advance Design 2016 Table of contents WELCOME TO ADVANCE DESIGN 2016... 5 NEW RIBBONS... 7 LOCALIZATION: NATIONAL EUROCODE APPENDIXES FOR POLAND... 9 PN-EN 1990:2004/NA:2010 Actions & Combinations...
More informationINTERNSHIP REPORT Analysis of a generic lifting table Ruben Teunis s Mechanical Engineering Applied Mechanics, CTW
INTERNSHIP REPORT Analysis of a generic lifting table Ruben Teunis s1112392 Mechanical Engineering Applied Mechanics, CTW 25-08-2014 5-12-2014 Enschede, The Netherlands Supervisor: T. Tinga Hengelo, The
More informationCONSTRUCT USER S MANUAL. Conceptual Structural Design Software REVISION 1.0 ( )
USER S MANUAL Conceptual Structural Design Software REVISION 1.0 (24.01.2010) Aalto University School of Science and Technology Department of Applied Mechanics Marine Technology Table of Contents TABLE
More informationIDEA StatiCa Steel. Release notes DRAFT Version 9.0
IDEA StatiCa Steel Release notes DRAFT Version 9.0 April 2018 Content HIGHLIGHTS... 3 GUI REDESIGN... 3 NEW CLEAN DESIGN... 3 WIZARD FOR THE NEW CONNECTION... 3 NAVIGATOR REPLACED WITH THE RIBBON TABS...
More informationFEM-Design Steel Joint User Manual
FEM-Design Steel Joint User Manual StruSoft AB www.strusoft.com August 1 st, 2016 StruSoft AB Visit the StruSoft website for company and FEM-Design information at http://www.strusoft.com User Manual for
More informationPennDOT e-notification Bureau of Business Solutions and Services Highway/Engineering Applications Division
PennDOT e-notification Bureau of Business Solutions and Services Highway/Engineering Applications Division STLRFD No. 013 October 17, 2016 Release of Version 2.4.0.0 The Department s LRFD Steel Girder
More informationPENNDOT e-notification Bureau of Business Solutions and Services Highway/Engineering Application Division
PENNDOT e-notification Bureau of Business Solutions and Services Highway/Engineering Application Division STLRFD No. 009 August 27, 2012 Release of Version 2.1.0.0 The Department s LRFD Steel Girder Design
More informationOPTIMIZATION OF ENERGY DISSIPATION PROPERTY OF ECCENTRICALLY BRACED STEEL FRAMES
OPTIMIZATION OF ENERGY DISSIPATION PROPERTY OF ECCENTRICALLY BRACED STEEL FRAMES M. Ohsaki (Hiroshima Univ.) T. Nakajima (Kyoto Univ. (currently Ohbayashi Corp.)) Background Difficulty in optimization
More informationTopic Training Load generators
Topic Training Load generators Topic Training Load generators All information in this document is subject to modification without prior notice. No part of this manual may be reproduced, stored in a database
More informationPRE-DESIGN OF SEMI-RIGID JOINTS IN STEEL FRAMES
PRE-DESIGN OF SEMI-RIGID JOINTS IN STEEL FRAMES Martin Steenhuis ( ), Nol Gresnigt ( ), Klaus Weynand ( 3 ) Keywords: steel, joints, frames, semi-rigid, pre-design, stiffness, classification Abstract The
More informationTekla Structures Analysis Guide. Product version 21.0 March Tekla Corporation
Tekla Structures Analysis Guide Product version 21.0 March 2015 2015 Tekla Corporation Contents 1 Getting started with analysis... 7 1.1 What is an analysis model... 7 Analysis model objects...9 1.2 About
More informationSolid design. Reliable pipelines. Simulation results can be viewed and printed in different formats in tables, graphs and in 3D illustrations.
Bringing added value to pipeline engineers worldwide SAGE Profile has been specifically designed to assist pipeline engineers in the design, installation and analysis of offshore pipelines. The powerful
More informationSAFI Sample Projects. Design of a Steel Structure. SAFI Quality Software Inc. 3393, chemin Sainte-Foy Ste-Foy, Quebec, G1X 1S7 Canada
SAFI Sample Projects Design of a Steel Structure SAFI Quality Software Inc. 3393, chemin Sainte-Foy Ste-Foy, Quebec, G1X 1S7 Canada Contact: Rachik Elmaraghy, P.Eng., M.A.Sc. Tel.: 1-418-654-9454 1-800-810-9454
More informationTable of contents. What is new in Advance Steel 2014 WELCOME TO ADVANCE STEEL USER INTERFACE ENHANCEMENTS... 6 MODELING JOINTS...
Table of contents WELCOME TO ADVANCE STEEL 2014... 5 USER INTERFACE ENHANCEMENTS... 6 User interface 1: Customizable tool palette... 6 User interface 2: Collision check results... 7 User interface 3: Steel
More informationConnection Study Environment
Paolo Rugarli Connection Study Environment Tutorial 4: Splice joint (with penetration welds) http://www.castaliaweb.com - http://www.steelchecks.com Via Pinturicchio, 24 20133 Milan - Italy staff@castaliaweb.com
More informationDURABILITY ADD-ONS FOR ANSA AND µeta
DURABILITY ADD-ONS FOR ANSA AND µeta Dr. Dietmar Fels Ford Werke GmbH / Germany KEYWORDS Durability, Scripting, Pre and Postprocessing ABSTRACT - The functionality of ANSA and µeta has reached an outstanding
More informationDevelopment of Bellows Design Software using MATLAB
Indian Journal of cience and Technology, Vol 8(8), 201 206, April 2015 IN (Print) : 097-686 IN (Online) : 097-565 DOI: 10.1785/ijst/2015/v8i8/70619 Development of Bellows Design oftware using MATLAB ungchul
More informationMultiframe June 2003 Release Note
Multiframe 8.53 18 June 2003 Release Note This release note describes the Windows version 8.53 of Multiframe, Steel Designer and Section Maker. This release contains numerous enhancements to this range
More informationTutorial. External Application Checks using Excel
Tutorial External Application Checks using Excel External Application Checks for Excel All information in this document is subject to modification without prior notice. No part or this manual may be reproduced,
More informationAPPLICATION OF STRUCTURAL OPTIMISATION WITH BOSS QUATTRO TO A380 RIB1 OPTIMISATION
December 2003 FENet Presented by Ghislaine MALHERBE (SAMTECH France) Collaboration with Stéphane Grihon ESANT - (AIRBUS France) Cesare CRUCCAS (SAMTECH France) APPLICATION OF STRUCTURAL OPTIMISATION WITH
More informationUsing the Femap API to Improve the Analysis Process Kurt Knutson / Manager of Software Services
Femap Symposium 2015 [San Diego] Co-Hosted with [ATA Engineering] Using the Femap API to Improve the Analysis Process Kurt Knutson / Manager of Software Services Femap Symposium Series 2015 February 24,
More informationNon-Linear Analysis of Bolted Flush End-Plate Steel Beam-to-Column Connection Nur Ashikin Latip, Redzuan Abdulla
Non-Linear Analysis of Bolted Flush End-Plate Steel Beam-to-Column Connection Nur Ashikin Latip, Redzuan Abdulla 1 Faculty of Civil Engineering, Universiti Teknologi Malaysia, Malaysia redzuan@utm.my Keywords:
More informationBackground CE 342. Why RISA-2D? Availability
Background CE 342 RISA-2D RISA-2D is a structural analysis program, which can model: Beams, frames, trusses and plates. Any linear elastic structural material. Typical supports, such as pins, rollers and
More informationENGINEERING CALCULATIONS IN SCIA DESIGN FORMS A link between 3D CAE software and customised design checks
EUROSTEEL 2014, September 10-12, 2014, Naples, Italy ENGINEERING CALCULATIONS IN SCIA DESIGN FORMS A link between 3D CAE software and customised design checks Zuzana Hekrdlová a, Peter Van Tendeloo b,
More informationStrength of Overlapping Multi-Planar KK Joints in CHS Sections
Strength of Overlapping Multi-Planar KK Joints in CHS Sections Peter Gerges 1, Mohamed Hussein 1, Sameh Gaawan 2 Structural Engineer, Department of Structures, Dar Al-Handasah Consultants, Giza, Egypt
More informationSAP2000 Version Release Notes
SAP2000 Version 17.3.0 Release Notes Copyright Computers and Structures, Inc., 2015 Notice Date: 2015-07-02 This file lists all changes made to SAP2000 since the previous version. Most changes do not affect
More informationScia Engineer Optimizer
Scia Engineer Optimizer Tutorial All information in this document is subject to modification without prior notice. No part or this manual may be reproduced, stored in a database or retrieval system or
More informationNastran CBUSH Element Orientation Blog Post pdf
Nastran CBUSH Element Orientation Blog Post pdf Author: Surya Batchu Senior Stress Engineer Founder, STRESS EBOOK LLC. http://www.stressebook.com 1 P a g e Nastran CBUSH Element Orientation The Nastran
More informationManual Steel Connections
Manual Steel Connections Steel Connections Table Of Contents GETTING STARTED WITH CONNECTIONS... 1 Welcome... 1 Introduction to connections... 2 CONNECTION TYPES... 3 Introduction to connection types...
More informationSpectral fatigue for FPSO conversion.
Spectral fatigue for FPSO conversion. Vincent Bonniol, Introduction The required time to build a new FPSO leads to more and more conversions from existing tankers. On demand of several oil companies has
More informationHilti North America Installation Technical Manual Technical Data MI System Version
MIC-CU-MAH 2174664 Hilti North America Installation Technical Manual Technical Data MI System Version 1.2 08.2017 Terms of common cooperation / Legal disclaimer The product technical data published in
More informationEngineering Analysis
Engineering Analysis with SOLIDWORKS Simulation 2018 Paul M. Kurowski SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites
More informationUsing the Femap API to Streamline Geometry Preparation and Meshing for the Shipbuilding Industry
Victoria Harris, Project Engineer, ATA Engineering, Inc Using the Femap API to Streamline Geometry Preparation and Meshing for the Shipbuilding Industry Femap Symposium 2014 May 14-16, Atlanta, GA, USA
More informationCSiBridge 2015 (Version ) Release Notes
CSiBridge 2015 (Version 17.3.0) Release Notes Copyright Computers and Structures, Inc., 2015 Notice Date: 2015-07-02 This file lists all changes made to CSiBridge since the previous version. Most changes
More informationST5 - Weld Design. FRILO Software GmbH as of
ST5 - Weld Design FRILO Software GmbH www.frilo.com info@frilo.com as of 29.03.2016 ST5 ST5 Weld Design Contents Application options 4 Basis of calculation 4 Verification of welding seams 4 Constructive
More informationSheet Metal Overview. Chapter. Chapter Objectives
Chapter 1 Sheet Metal Overview This chapter describes the terminology, design methods, and fundamental tools used in the design of sheet metal parts. Building upon these foundational elements of design,
More informationSOLIDWORKS Costing is available in SOLIDWORKS Professional and SOLIDWORKS Premium.
The SOLIDWORKS Costing tool helps you calculate how much it costs to manufacture sheet metal, machined, and multibody parts, as well as plastic molded, cast, 3D printed parts, and multibody weldments by
More informationMAE Advanced Computer Aided Design. 01. Introduction Doc 02. Introduction to the FINITE ELEMENT METHOD
MAE 656 - Advanced Computer Aided Design 01. Introduction Doc 02 Introduction to the FINITE ELEMENT METHOD The FEM is A TOOL A simulation tool The FEM is A TOOL NOT ONLY STRUCTURAL! Narrowing the problem
More informationEurocodes and Innovation. Developments in Finite Element Analysis for Bridges
Eurocodes and Innovation Developments in Finite Element Analysis for Bridges Developments in Finite Element Analysis for Bridges Ease of Use Vehicle Loading - Autocombinations Cable Tuning Construction
More informationOrganizing and Summarizing Data
1 Organizing and Summarizing Data Key Definitions Frequency Distribution: This lists each category of data and how often they occur. : The percent of observations within the one of the categories. This
More informationSIMPLIFIED FATIGUE ANALYSIS BASED ON ABS GUIDE FOR " FATIGUE ASSESSMENT OF OFFSHORE STRUCTURE" WITH 2 SEGMENT SN CURVE
Welcome to this application for Simplified Fatigue Analysis based on ABS Rules What this program does? This program can be used to assess the Fatigue Strength of an Offshore Structure based on ABS Rules
More informationRelease notes. D-Geo Pipeline New feature
Release notes D-Geo Pipeline 18.2.2.20951 11-06-2018 New feature MDR-1130 In the Factors window for HDD and Micro Tunneling, a new input called "Ratio H/Do boundary shallow/deep" is available and used
More information1 of 9 8/27/2014 10:53 AM Units: Teacher: MOExcel/Access, CORE Course: MOExcel/Access Year: 2012-13 Excel Unit A What is spreadsheet software? What are the parts of the Excel window? What are labels and
More informationEng Ship Structures 1 L E C T U R E 1 0 : F I N I T E E L E M E N T T E C H N I Q U E S I N S H I P S T R U C T U R A L D E S I G N
Eng. 6002 Ship Structures 1 L E C T U R E 1 0 : F I N I T E E L E M E N T T E C H N I Q U E S I N S H I P S T R U C T U R A L D E S I G N Contents Introduction Linear Analysis Static Non-linear Analysis
More informationEarthbound Welded Anchor Calculations
Earthbound Welded Anchor Calculations Objective: Find a welded anchor to steel beam connection able to handle 1.125 inch diameter A193B7 Threaded. Calculate the welding requirements for welding a round
More informationHow to re-open the black box in the structural design of complex geometries
Structures and Architecture Cruz (Ed) 2016 Taylor & Francis Group, London, ISBN 978-1-138-02651-3 How to re-open the black box in the structural design of complex geometries K. Verbeeck Partner Ney & Partners,
More informationCOMPUTERS AND STRUCTURES, INC., MAY 2011 AUTOMATIC WAVE LOADS TECHNICAL NOTE WAVE LOAD OVERVIEW
COMPUTERS AND STRUCTURES, INC., MAY 2011 AUTOMATIC WAVE LOADS TECHNICAL NOTE WAVE LOAD OVERVIEW This Technical Note presents a brief overview of the automatic wave loading features in the program. The
More informationA METHOD OF APPLYING LINEAR SEAKEEPING PANEL PRESSURE TO FULL SHIP STRUCTURAL MODELS
A METHOD OF APPLYING LINEAR SEAKEEPING PANEL PRESSURE TO FULL SHIP STRUCTURAL MODELS Ming Ma - DRS Defence Solutions, USA Chengbi Zhao - SCUT, China Nick Danese - COMPIT 2012 Liège, 16-18 April 2012 /1
More informationRelease notes. Release
Release notes Release 2018.9-29-10-2018 1 Content 1. Introduction... 3 2. Building... 4 2.1. WELL-score... 4 2.2. More insight into product fields when down drilling... 4 2.3. View selected elements in
More informationREVIT SCIA ENGINEER LINK RELEASE NOTES
REVIT SCIA ENGINEER LINK RELEASE NOTES Contents Release Notes... 1 Version 2019 (Build 421): May 2018... 1... 1... 2 Version 2018.1 (Build 363): November 2017... 2... 2... 2 Version 2018 (Build 328): June
More informationHO2 - Skew Notch Joint. Nemetschek Frilo GmbH Version: 1/2013 As of 25/04/2013
HO - Skew Notch Joint Nemetschek Frilo GmbH www.frilo.com info@frilo.com Version: 1/013 As of 5/04/013 HO HO Skew Notch Joint Note: This document describes the Eurocode-specific application. Documents
More informationNX Fixed Plane Additive Manufacturing Help
NX 11.0.2 Fixed Plane Additive Manufacturing Help Version #1 1 NX 11.0.2 Fixed Plane Additive Manufacturing Help June 2, 2017 Version #1 NX 11.0.2 Fixed Plane Additive Manufacturing Help Version #1 2 Contents
More informationAISIBEAM User's Manual (Version 3.0)
AISIBEAM User's Manual (Version 3.0) Shabin Taavoni, Ph.D., PE, title Structural Software Inc. location John C. Huang Ph.D., PE, Principal CHC Engineering, LLC Herndon, VA Scope of Software The software
More informationWhite Paper. Template Analysis in Practice. Allowing the common user to come to an optimal productivity
White Paper Template Analysis in Practice Allowing the common user to come to an optimal productivity Scia Group nv Industrieweg 1007 3540 Herk-de-Stad (Belgium) Tel.: (+32) 013 55.17.75 Fax: (+32) 013
More informationABS CONSTRUCT USERS MANUAL VERSION 1.2 Copyright C 1989 Vacanti Yacht Design
ABS CONSTRUCT USERS MANUAL VERSION 1.2 Copyright C 1989 Vacanti Yacht Design All rights reserved. No part of this manual may be used or reproduced in any form or by any means without prior written permission
More informationWeld Strength Extension
Weld Strength Extension DOCUMENTATION Extension version 170.7 Release date 07-Feb-17 Compatible ANSYS version 17.X, 18.0 www.edrmedeso.com Table of Contents Weld Strength toolbar... 3 Weld Strength Help...
More informationGT STRUDL. GT STRUDL Release Guide Version Volume 1 of 1
GT STRUDL GT STRUDL Release Guide Version 28.1 Volume 1 of 1 January 2006 Computer-Aided Structural Engineering Center School of Civil & Environmental Engineering Georgia Institute of Technology Atlanta,
More informationProblem 1. Lab #12 Solution
Lab #1 Solution Problem 1 Given Truss Roof Dead Load of 16 psf, Snow Live load of 16 psf, Truss spacing of 4" o.c. Lumber is No. DF-L Bolt holes are 7/" diameter, MC < 19%, Temp < 100 degree F, and Ci
More informationFINITE ELEMENT ANALYSIS OF A COMPOSITE CATAMARAN
NAFEMS WORLD CONGRESS 2013, SALZBURG, AUSTRIA FINITE ELEMENT ANALYSIS OF A COMPOSITE CATAMARAN Dr. C. Lequesne, Dr. M. Bruyneel (LMS Samtech, Belgium); Ir. R. Van Vlodorp (Aerofleet, Belgium). Dr. C. Lequesne,
More informationADAPT-PT/RC 2014 Getting Started Tutorial ADAPT-RC mode
ADAPT-PT/RC 2014 Getting Started Tutorial ADAPT-RC mode Update: January 2014 Copyright ADAPT Corporation all rights reserved ADAPT-PT/RC 2014-Tutorial- 1 This ADAPT-PT/RC 2014 Getting Started Tutorial
More informationSESAM USER MANUAL. GeniE Tutorial. Semi Pontoon Workshop SAFER, SMARTER, GREENER
SESAM USER MANUAL GeniE Tutorial Semi Pontoon Workshop SAFER, SMARTER, GREENER Sesam User Manual GeniE Tutorial Semi Pontoon Workshop Date: 29 January 2015 Valid from GeniE V7.0 Prepared by DNV GL - Software
More informationPart 2: PowerFrame Reference Manual
Part 2: PowerFrame Reference Manual 2006, BuildSoft NV All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means, electronic or manual, for any purpose
More informationEMSHIP Erasmus Mundus Master Course in Integrated Advanced Ship Design
EMSHIP Erasmus Mundus Master Course in Integrated Advanced Ship Design Global and Local Strength Analysis in Equivalent Quasistatic Head Waves, for a Tanker Ship Structure, Based on Full Length and 2-3
More informationAUTOMATIC TENSION & COMPRESSION TESTING MACHINE
Product Code UTM-3000 Automatic 500 kn Tension and 1000 kn Compression Testing Machine Standards GENERAL PROPERTIES UTM-3000 automatic 500 kn tension and 1000 kn compression testing machine has been designed
More informationApplication nr. 2 (Global Analysis) Effects of deformed geometry of the structures. Structural stability of frames. Sway frames and non-sway frames.
Application nr. 2 (Global Analysis) Effects of deformed geometry of the structures. Structural stability of frames. Sway frames and non-sway frames. Object of study: multistorey structure (SAP 2000 Nonlinear)
More informationSAFEHULL-DYNAMIC LOADING APPROACH FOR CONTAINER CARRIERS
GUIDANCE NOTES ON SAFEHULL-DYNAMIC LOADING APPROACH FOR CONTAINER CARRIERS (FOR THE SH-DLA CLASSIFICATION NOTATION) APRIL 2005 American Bureau of Shipping Incorporated by Act of Legislature of the State
More informationA05 Steel Catenary Riser Systems
A05 Steel Catenary Riser Systems Introduction This example contains three examples of steel catenary risers (SCRs). These are: Catenary with Spar Catenary with SemiSub Lazy Wave with FPSO The example also
More informationADAPT-PT/RC 2018 Getting Started Tutorial ADAPT-RC mode
ADAPT-PT/RC 2018 Getting Started Tutorial ADAPT-RC mode Update: September 2018 Copyright ADAPT Corporation all rights reserved ADAPT-PT/RC 2017-Tutorial- 1 This ADAPT-PT/RC 2018 Getting Started Tutorial
More information2016(v1.1) Release Notes
2016(v1.1) Release Notes Ver 4.0.0. 개정내용 2016(v1.1) Release Notes Copyright c 1989~2014. MIDAS Information Technology Co., Ltd. ALL RIGHTS RESERVED. 1 / 21 Release Note 2016(v1.1) Release Notes Pre-Processing
More information2D Tutorial. Project Description: Running VisualAnalysis: Setting Up the Project:
2D Tutorial Project Description: This project has been set-up to demonstrate the basic features of VisualAnalysis. You will model and analyze the following two-dimensional frame with a curved glue-laminated
More informationChapter 3 Analysis of Original Steel Post
Chapter 3. Analysis of original steel post 35 Chapter 3 Analysis of Original Steel Post This type of post is a real functioning structure. It is in service throughout the rail network of Spain as part
More informationHow do you crate a research paper? Essential Question(s): Content. Skills: Standards/Benchmarks
Department: Business Course Title 21 st Century Computer Skills 1 Unit 1, September Unit 1 Word Creating & Editing a Word Document Unit 2, October Unit 2 Creating a Research Paper What is Microsoft Word?
More informationixcube 4-10 Brief introduction for membrane and cable systems.
ixcube 4-10 Brief introduction for membrane and cable systems. ixcube is the evolution of 20 years of R&D in the field of membrane structures so it takes a while to understand the basic features. You must
More informationFinite Element Modeling and Multiphysics Simulation of Air Coupled Ultrasonic with Time Domain Analysis
More Info at Open Access Database www.ndt.net/?id=15194 Finite Element Modeling and Multiphysics Simulation of Air Coupled Ultrasonic with Time Domain Analysis Bikash Ghose 1, a, Krishnan Balasubramaniam
More information3. Check by Eurocode 3 a Steel Truss
TF 3. Check by Eurocode 3 a Steel Truss Applicable CivilFEM Product: All CivilFEM Products Level of Difficulty: Moderate Interactive Time Required: 40 minutes Discipline: Structural Steel Analysis Type:
More informationProgram DSTV. Typified Connections in Steel Building Construction acc. to EC 3 and DIN (2. Edition) Program Description
Version June 2011 Program DSTV Typified Connections in Steel Building Construction acc. to EC 3 and DIN 18800 (2. Edition) Program Description All rights, including those of translations, are reserved.
More informationConnection Study Environment
Paolo Rugarli Connection Study Environment Tutorial 3: building a multiple-members renode. Part 3 http://www.castaliaweb.com - http://www.steelchecks.com Via Pinturicchio, 24 20133 Milan - Italy staff@castaliaweb.com
More informationA new Aluminium Structural Analysis and Design Methodology
A new Aluminium Structural Analysis and Design Methodology Jean-Pierre RAMMANT Chief Executive Officer SCIA int l, Belgium jpr@scia.be Chris VAN LOOCK Process Manager SCIA Int l, Belgium c.v.loock@scia.be
More informationAgenda. 9:00 Welcome. 1:00 - Computing Utilities. 9:15 - Mechanical Demonstration. 1:30 - CFD Update. 3:00 Break 3:15 ANSYS Customization Toolkit
Agenda 9:00 Welcome 1:00 - Computing Utilities Introductions What is new at CAEA 9:15 - Mechanical Demonstration CAD connection utilities (within the CAD API) Mechanical setup Rigid Bodies, Joints, contact,
More informationUnit Title Key Concepts Vocabulary CCS
Unit Title Key Concepts Vocabulary CCS Unit 1 Writing and Evaluating s Unit 2 Writing and Solving Equations s and Equations Write numerical expressions Evaluate numerical expressions Write algebraic expressions
More information