* * * CORVUS SYSTEMS * * SYSTEM GENERATION GUIDE Apple III

Transcription

1 4t '- * * * CORVUS SYSTEMS * * SYSTEM GENERATION GUIDE Apple III

2 LIMITED WARRANTY Corvus warrants its hardware products against defects in materials and workmanship for a period of 180 days from the date of purchase from any authorized Corvus Systems dealer. If Corvus receives notice of such defects during the warranty period, Corvus will, at its option, either repair or replace the hardware products which prove to be defective. Repairs will be performed and defective parts replaced with either new or reconditioned parts. Corvus software and firmware products which are designed by Corvus for use with a hardware product, when properly installed on that hardware product, are warranted not to fail to execute their programming instructions due to defects in materials and workmanship for a period of 180 days. If corvus receives notice of such defects during the warranty period, Corvus does not warrant that the operation of the software, firmware or hardware shall be uninterrupted or error free. Limited Warranty service may be obtained by delivering the product during the 180 day warranty period to Corvus Systems with proof of purchase date. YOU MUST CONTACT CORVUS CUSTOMER SERVICE TO OBTAIN A "RETURN AUTHORIZATION CODE" PRIOR TO RETURNING THE PRODUCT. THE RAC (RETURN AUTHORIZATION CODE) NUMBER ISSUED BY CORVUS CUSTOMER SERVICE MUST APPEAR ON THE EXTERIOR OF THE SHIPPING CONTAINER. ONLY ORIGINAL OR EQUIVALENT SHIPPING MATERIALS MUST BE USED. - If this product is delivered by mail, you agree to insure the product or assume the risk of loss or damage in transit, to prepay shipping charges to the warranty service location and to use the original shipping container. Contact corvus systems or write to Corvus Customer Service, 2100 Corvus Drive, san Jose, CA, prior to shipping equipment. ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO A PERIOD OF 180 DAYS FROM DATE OF PURCHASE, AND NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, WILL APPLY AFTER THIS PERIOD. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU. IF THIS PRODUCT IS NOT IN GOOD WORKING ORDER AS WARRANTED ABOVE, YOUR SOLE REMEDY SHALL BE REPAIR OR REPLACEMENT AS PROVIDED ABOVE. IN NO EVENT WILL CORVUS SYSTEMS BE LIABLE TO YOU FOR ANY DAMAGES, INCLUDING ANY LOST PROFITS, LOST SAVINGS OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF OR INABILITY TO USE SUCH PRODUCT, EVEN IF CORVUS SYSTEMS OR AN AUTHORIZED CORVUS SYSTEMS DEALER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, OR FOR ANY CLAIM BY ANY OTHER PARTY. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR CONSUMER PRODUCTS, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH MAY VARY FROM STATE TO STATE.

3 SYSTEM GENERATION GUIDE Apple III Part Number: Release Date: December 1984 Revision: A

4 f a NOTICE Corvus Systems, Inc. reserves the right to make changes in the product described in this manual at any time without notice. Revised manuals will be published as needed and may be purchased from authorized Corvus Systems dealers. This manual is copyrighted. All rights reserved. This document may not, in whole, or in part be copied, photocopied, reproduced, translated or reduced to any electronic medium or machine readable form without prior consent in writing from: Corvus Systems, Inc Corvus Drive San Jose, CA Telephone: (408) TELEX: (c) Copyright 1984 by Corvus Systems, Inc. All rights reserved. Apple (R) is a registered trademark of Apple Computer, Inc. Corvus Systems (TM), Corvus Concept (TM), Transporter (TM), Omninet (TM), LogiCalc (TM), EdW6rd (TM), The Bank (TM), Bank Tape (TM), OmniDrive (TM), ISYS (TM), Constellation (R), and Mirror (R) are trademarks of Corvus systems, Inc. Mirror (R), u.s. Patent #4,380,047 International patents pending Corvus Concept (TM), patent pending omninet (TM), patent pending

5 System Generation Guide iii TABLE OF CON'l'EN'l'S Gettinq Started: How this Guide is Organized 1 Usage, 2 Hardware and Software Required 2 1 Chapter 1: Preparing for Apple III Constellation II Copying Diskettes Updating Firmware Chapter 2: Setting up a New Drive Chapter 3: Adding to an Existing Drive Finding a Free Area Checkinq Names Adding Apple III Constellation II 22 Chapter 4: Making a Boot Diskette 31 Appendix A: Names and Passwords 33 Apple III

6 System Generation Guide 1 GETTING started This guide shows how to prepare a Corvus mass storage system for use with an Apple (R) III computer. The guide addresses installing Constellation II for the Apple III on a new OmniDrive (TM) mass storage system, and adding Constellation II for the Apple III to an OmniDrive that already has an existing operating system. Before following the steps in this guide, complete the Apple III Network Station Installation Guide. HOW THIS GUIDE IS ORGANIZED Read the chapter summaries below for instructions on generating your mass storage system. Complete chapter 1, and then select either chapter 2 or chapter 3 for initializing your drive. Then continue with chapter 4. All users will turn to Chapter 1 to make copies of the Corvus diskettes and update the firmware. Go to Chapter 2, "Setting up a New Drive," to generate a new mass storage system that has never been initialized for Constellation II. Go to Chapter 3, "Adding to an Existing Drive," to add the Apple III Constellation II software to a mass storage system already using Constellation II software and a different computer type. All users will turn to Chapter 4, "Making a Boot Diskette," to learn how to make a boot diskette for the network user. Apple III

7 ' 2 System Generation Guide USAGE Throughout this guide, type means to enter two or more characters or keyboard symbols on the computer keyboard. Type all words, symbols, spaces and punctuation to the right of type exactly as shown. Do not add or leave out punctuation marks at the end of the statement. Examples: Type Type DIR C: COPY B:*.DOC Throughout this guide, press means to enter a single character or symbol on the computer keyboard. When a keytop symbol appears, press the key to which it refers. Do not type out each letter of the word in the keytop symbol. Examples: Press Y Press [RETURN) When the command type or press appears in a sentence or paragraph, enter the information indicated. Example: Type your user name and password and press [RETURN]. HARDWARE AND SOFTWARE REQUIRED In order to initialize a drive for the Apple III, you must have an Apple III computer with at least 256 kilobytes of memory and an external floppy drive. Generating Apple III Constellation II requires the following software: o Apple III Constellation II utilities (four diskettes) A3C2.1 A3C2.2 A3C2.3 A3C Apple III

8 System Generation Guide o Apple III System Manager's diskette (one diskette) A3SMGR 3 ' Apple III

9 . 4 System Generation Guide \. This page intentionally left blank..;; Apple III

10 System Generation Guide 5 ' I PREPARING FOR APPLE III CONSTELLATION II 1 This chapter shows how to make copies of the Corvus diskettes and how to update the firmware. Copying the Corvus diskettes protects the information, and updating the firmware allows the Apple III to communicate with the mass storage system. COPYING DISKETTES~ 1. Insert the Apple III utilities diskette. Insert the Apple III utilities diskette in the. internal floppy drive. 2. Turn on the Apple III. The screen displays the Apple III utilities main menu. 3. Copy the corvus diskettes. Make copies of the Corvus diskettes: A3SMGR, A3C2.1, A3C2.2, A3C2.3, and A3C2.4. To make copies of these diskettes use the Apple sos Copy-volume command on the Device Handling Commands Main Menu. Use the copies to generate the system. Store the originals in a safe place. If any problems arise, tne source diskettes will be available. corvus Systems

11 6 System Generation Guide. ' UPDATING FIRMWARE Before the Apple III can communicate with the mass storage system, a new firmware file should be copied from a diskette to the drive. The firmware acts as an interpreter for drive commands. Copying new firmware onto the drive is known as updating the firmware. To update the firmware, use the disk diagnostic program. Follow the steps below. 1. Insert the A3SMGR diskette in the diskette drive. Make sure your OmniDrive is turned on and then Insert the A3SMGR diskette in the internal floppy drive. 2. Boot the computer. Hold down [CTRL] and press [RESET] Then screen displays: Error reading Constellaton boot file. Press any key to continue Do not be alarmed by the error message. At this point the screen should display this message. Press [SPACE] The screen displays the Pascal eommand line Corvus Systems

12 System Generation Guide 3. Insert the A3C2.1 diskette in the floppy drive. Remove the AJSMGR diskette from the floppy drive and insert the A3C2.1 diskette in the internal floppy drive. 7 ' 4. :Insert the A3C2.3 diskette in the floppy drive. Insert the A3C2.3 diskette in the external floppy drive. s. Execute the diagnostic program. Press X Execute what file? Type.02/MDIAG Press [RETURN] The screen display is similar to: Corvus Systems

13 ' 8 System Generation Guide MDIAG [x.xx] Corvus Mass Storage Diagnostic Select Drive Slt: 4 Srv: o Slot 1:... Slot 2: Slot 3:... Slot 4: Corvus Omninet interface Select slot number: [4] 6. Select the slot number. Press the slot number of the Omninet interface. Press [RETURN] ~---- Enter the server number: [0] 7. Select the server number. Enter the Omninet address of the mass storage system. This address was determined in the section "Setting the omninet Address" of the OmniDrive setup Instructions or in the Disk Server Installation Guide. After entering the address, Press [RETURN] The screen display is similar to: Corvus Systems

14 System Generation Guide 9 Selected drive is drive DRIVEl on SERVERO Continue? [Y/N]: Press Y ~ ~---~ MDIAG [x.xx] Corvus Mass Storage Diagnostic {C) 1984, Corvus Systems, Inc. Slot: 4 Srvr: 0 D - Select Drive V - Version Check P - Park Heads for Shipment X - Exercise Drive c - Check for Bad Tracks s - Show Results F - Format Drive u - Update Firmware M - Modify Parameters N - Set Diag Data File Name A - Advanced Options E - Exit Select diagnostic option 8. Select update firmware. Press u The screen display is similar to: corvus Systems

15 10 System Generation Guide -~ MDIAG [x.xx] Corvus Mass Storage Diagnostic Update Firmware OmniDrive Slt: 4 Srvr: o The selected option may destroy data on the drive. Ensure the correct device is selected. FORMAT and UPDATE options require the firmware file to be on a controller card other the selected device Selected device is slot 4, server o, drive 1 continue? [Y/N] After ensuring that the slot and server are correct, Press Y The screen display is similar to: Change drive tables? (Y/N]: [N] Do not change the drive tables. Press [RETURN] The screen display is similaz:,.to:.; Enter firmware file name: [ODRV.FIRMWARE] Corvus Systems

16 System Generation Guide Enter the. firmware file name. Accept the suggested file name. Press [RETURN] Firmware file message ODRV CONSTII -- 09/84 Continue? [Y/N] Y Press [RETURN] The screen display is similar to Moving firmware from file ODRV.FIRMWARE to drive Drive Firmware updated. Reset device -- Turn drive power off and then on again. Press <space> to continue Press [SPACE] The screen displays the disk diagnostic program main menu. 10. Reset the drive. Turn your OmniDrive off and then back on again. When only the ready light is on, go to the next step. Corvus Systems

17 "' Exit the diagnostic program. System Generation Guide Press E ~-~ Insert volume: A3SMGR in device:.01 then press the ALPHA LOCK key twice Insert the A3SMGR diskette in the diskette drive. Insert the A3SMGR diskette in the internal floppy drive. Press the Alpha Lock key twice. The screen displays the Pascal command line and the error message: Unable to open file /A3SYS/C2MGR.CODE. Unit is not on line. Do not be alarmed by this error message. the error message should occur. At this point, Where to go from here: o If initializing a mass storaqe system that has never been initialized for Constellation II, then qo to Chapter 2 of of this quide. o If addinq the Apple III constellation II system to a mass storage system already using Constellation II software, then go to Chapter 3 of this guide Corvus Systems

18 System Generation Guide 13 SETTING UP A NEW DRIVE 2 This chapter shows how to generate an Apple III Constellation II system for a new OmniDrive. once the firmware has been updated, run the system generation program from the Apple III to put the Constellation II utilities on the mass storage system. 1. Insert the A3C2.1 diskette in the diskette drive. The screen should be displaying the Pascal command line. If the Pascal command line is not displayed on the screen then boot the computer with the A3SMGR diskette. Insert the A3C2.1 diskette in the internal floppy drive. 2. Insert the A3C2.2 diskette in the diskette drive. Insert the A3C2.2 diskette in the external floppy drive. 3. Run the system generation program. From the Pascal command line, Press X Execute what file? Apple III

19 t 14 Type.D2/SYSGEN Press [RETURN] System Generation Guide ~ Enter SYSGEN Password: Enter the password. Type HAI Press [RETURN] The password does not appear on the screen. The screen displays the main menu of the system generation program: System Generation [x.xx] Main Menu (c) Copyright 1982, 1983, 1984 Corvus Systems, Inc. I - Initialize a New Drive M - Modify an Existing Drive D - Display Drives On Line H - Help E - Exit Please select an option: s. Select the option to initialize a new drive. Press I Apple III

20 system Generation Guide ~ Please select drive to be initialized. Server number: [0) 6. Select the server number. Enter the Omninet address of the mass storage system. Type the Omninet address. Press [RETURN] Drive number: [1] 7. Select the drive. Press [RETURN] The screen display is similar to: Selected drive i's slot 7, server o, drive 1. Enter disk server name: [SERVERO] Apple III

21 16 System Generation Guide a. Name the disk server. Choose a name of up to 10 characters, either letters or numbers, with the first character a letter. Write this name in Appendix A. Type the name and press [RETURN]. Enter disk server password: [SERVERO] 9. create a disk server password. Choose a password of up to eight characters, either letters or numbers, with the first character a letter. Write this password in Appendix A. Type the password and press [RETURN]. Enter drive name: [DRIVEl] Name the drive. Choose a name of up to 10 characters, either letters or characters, with the first character a letter. Write the name in Appendix A. Type the name and press [RETURN]. Apple III

22 System Generation Guide 17 Enter drive password: [DRIVEl] ' 11. create a drive password. Choose a password of up to eight characters, either letters or numbers, with the first character a letter. Write the password in Appendix A. Type the password and press [RETURN]. Do you want to use the standard configuration? [Y/N]: [Y] Press [RETURN] Blocks 9 through 2108 will be overwritten. OK to initialize the new drive? [Y/N]: 12. Initialize the drive. Press Y Press [RETURN] Apple III

23 18 System Generation Guide Initializing CORVUS volume. [ 0] [ 40] [ 80] [ 120] [ 160] system table blocks initialized. The screen then displays a lengthy message indicating that a boot file and a user were added, the volumes A3SYS, A3BACK, and A3UTIL were intialized, and several files were copied. After this message is complete, the screen displays: Insert volume: A3SMGR in device:.01 then press the ALPHA LOCK key twice 13. Insert the A3SMGR diskette. in the diskette drive. Remove the A3C2.1 diskette from the internal floppy drive, and the A3C2.2 diskette from the external floppy drive. Insert the A3SMGR diskette in the internal floppy drive. Press the Alpha Lock key twice. Apple III

24 System Generation Guide 19 UPDATE [x.xx] Corvus Utility Update Program (c) Copyright 1983, 1984 Corvus Systems, Inc ~---- Please insert the A3C2.1 diskette in the internal drive Press <space> after inserting the diskette. 14. Transfer the files to the mass storage system. Generating the system requires transferring files from four diskettes: A3C2.1, A3C2.2, A3C2.3 and A3C2.4. The program prompts for each diskette by name. Insert each diskette in the internal floppy drive and press (SPACE] after inserting each diskette. When the program is finished with the last diskette, the screen displays: Space recovered. Update completed. Reboot required Reset the drive. Reset the drive by turning the drive off and then back on. When only the Ready light is on, go to the next step. 16. Reboot the computer. Remove the last diskette and boot the computer with the Apple III utilities diskette. Apple III

25 20 System Generation Guide The network disk system now has Apple III Constellation II software. Now qo to Chapter 4, "Makinq a Boot Diskette.n Apple III

26 System Generation Guide 21 ADDING TO AN EXISTING DRIVE 3 This chapter explains how to modify a mass storage system to include the Constellation II utilities for the Apple III. The mass storage system should already work with at least one computer type using Constellation II software. This chapter is split into three tasks: (1) find space on the mass storage system for the Apple III Constellation II system volumes; (2) check the existing user and volume names and make sure that they do not match the user arid volume names that will be created during system generation; and (3) add Apple III Constellation II. This chapter assumes the mass storage system is initialized and works with a computer that uses Constellation II software. Complete the Apple III Network Station Installation Guide before following the steps in this chapter. FINDING A FREE AREA To add the Constellation II system volumes for the Apple III you must find a free area of 1800 blocks on the drive. Log on as the system manager and enter the volume manager. From the volume manager main menu, Press L The volumes and their addresses are listed. If the largest free space on the drive is 1800 blocks or greater, note the address of this unused area. If the largest area on the drive is less than 1800 blocks, create an area of a least 1800 blocks by moving or deleting existing volumes. For instructions, see the system manager's guide for the existing system. Apple III

27 , 22 System Generation Guide Once an area of 1800 blocks is freed, note the free area's address. This address will be used in step 11 of this chapter's subsection "Adding Apple III Constellation II." Return to the volume manager main menu and continue to the next section. CHECK:ING NAMES The program that modifies an existing drive for the Apple III creates two users, A3MGR, and A3BACKUP, and three volumes, A3UTIL, A3BACK and A3SYS. Make sure that all of the existing user names and volume names are different from the names created during system generation. To check the volume names, press L from the volume manager main menu to list the volumes. If any of the existing volume names are A3UTIL, A3BACK, or A3SYS press [ESC]. Then select the change volume attributes option of the volume manager to change the name of the existing volume. To check the user names, press L from the user manager main menu to list the users. If any of the existing user names are A3MGR or A3BACKUP create a new user account with a different name but identical attributes and remove the duplicate user. After the user and volume nameshave been checked, return to the Constellation II main menu. ADD:ING APPLE :I:I:I CONSTELLATION :I:I After updating the firmware, finding a free area, and checking the names, run the system generation program to add the Apple III Constellation +~ uti~ities to ~he existing mass storage system :Insert the A3SMGR diskette in the diskette drive. Insert the A3SMGR diskette in the internal floppy drive Apple III

28 System Generation Guide Boot the computer. Hold down [CTRL] and press [RESET] Then screen displays: Error reading constellaton boot file. Press any key to continue Do not be alarmed by the error message. At this point the screen should display this message. Press any key. The screen displays the Pascal command line. 3. Insert the A3C2.1 diskette in the diskette drive. Remove the A3SMGR diskette from the internal floppy drive. Insert the A3C2.1 diskette in the internal floppy drive. 4. Insert the A3C2.2 diskette. in the diskette drive. Insert the A3C2.2 diskette in the external floppy drive. s. Run the system qeneration program. From the Pascal command line, Press X Apple III

29 , 24 System Generation Guide Execute what file?..;, _ Type.02/SYSGEN Press [RETURN] ~ Enter SYSGEN Password: Enter the password. Type HAI Press [RETURN] The password does not appear on the- screen._ screen displays the main menu of the system generation program: The Apple III

30 System Generation Guide System Generation [x.xx] Main Menu (c) Copyright 1982, 1983, 1984 Corvus Systems, Inc ~ I - Initialize a New Drive M - Modify an Existing Drive D - Display Drives On Line H - Help E - Exit Please select an option: 7. Select the option to modify an existing drive. Press M System Generation [x.xx] Modify an Existing Drive M - Mix Apple III with Other Computers using Constellation II A - Add Apple III Constellation II E - Exit converting Constellation I Please select an option: Apple III

31 , 26 System Generation Guide 8. Select mix Apple III with other computers. Press M Please select drive to be modified. Server number: [0] 9. Select the server number. Enter the Omninet address of the mass storage system to be modified. After entering the Omninet address, Press [RETURN] Drive number: [1] 10. Select the drive. Press the correct number. Press [RETURN] The screen display is similar to: Apple III

32 System Generation Guide ~ ~ Selected drive is slot 4, server 2, drive 1. Please enter starting disk address of system volumes: Enter the starting disk address. Type the address noted in the subsection "Finding a Free Area" and press [RETURN]. The screen display is similar to: Blocks 6353 through 8153 will be overwritten. OK to modify the drive? [Y/N]: 12. Choose to modify the drive. Press Y Press [RETURN] The screen displays a lengthy message indicating that a boot file and a user were added, the volumes A3SYS, A3BACK, and A3UTIL were intialized, and several files were copied. After this message is complete, the screen displays: Apple III

33 28 System Generation Guide Insert volume: A3SMGR in device:.dl then press the ALPHA LOCK key twice Insert the A3SMGR diskette in the diskette drive. Remove the A3C2.1 diskette from the internal floppy drive, and the A3C2.2 diskette from the external floppy drive. Insert the A3SMGR diskette in the internal floppy drive. Press the Alpha Lock key twice. The screen then displays: ~ UPDATE [x.xx] Corvus Utility Update Program (c) Copyright 1983, 1984 Corvus Systems, Inc. Please insert the A3C2.1 diskette in the internal drive Press <space> after inserting the diskette Transfer the files to the mass storage system. Generating the system requires transferring files from four diskettes: A3C2.1, A3C2.2, A3C2.3 and A3C2.4. The program prompts for each diskette by name. Insert each diskette in the internal floppy drive. Press [SPACE] after inserting each diskette. When the program is finished with the last diskette, the screen displays: Apple III

34 System Generation Guide 29 Space recovered. Update completed. Please Reboot. 15. Reset the drive. Reset your drive by turning it off and then back on again. When only the ready light is on, go to the next step. 16. Reboot the computer. Remove the last diskette and reboot the computer with the Apple III utilities diskette. The network disk system now has Apple III Constellation II software. Now go to Chapter 4, "Making a Boot Diskette." Apple III

35 30 System Generation Guide r This page intentionally left blank Apple III

36 System Generation Guide 31 \ 1 MAKING A BOOT DISKETTE 4 It is easy to make a boot diskette for a user who will use his Apple III primarily to run the Corvus utilities. First, label a blank diskette, "Corvus boot diskette." Then use the Apple sos copy volume command from the Device Handling Commands Main Menu to copy the A3SMGR diskette to the corvus boot diskette. After all the files are copied to the Corvus boot diskette, the diskette is ready to be used to boot the Apple III. Make copies of the boot diskette for each network user. If you need instructions on how to copy a volume with Apple sos, turn to your Apple III owner's Guide provided by Apple. If you already have a boot diskette for the Apple III and you want to keep your old SOS.DRIVER file because it contains special drivers then you must complete three tasks: (1) make a copy of the A3SMGR diskette and label this diskette "Corvus Boot Diskette"; (2) use the system configuration program to add the Corvus drivers, A3DRV.BOOT.CODE and A3DRV.SOS.CODE, to your existing SOS.DRIVER file (The Corvus drivers are on the A3C2. 2 diskette. ); (3) Replace the existing SOS.DRIVER file on the Corvus boot diskette with your SOS.DRIVER file. After completing these steps the boot diskette is finished. Make copies of the boot diskette for each network user. If you need instructions on how to use the system configuration program see the Apple III Standard Device Drivers Manual. Where to go from here: o If you followed the steps in Chapter 2, and are building a new network, go to the section, "Setting Up a Network" in the OmniDrive setup Instructions, then go to the the Apple III System Manager Guide. o If you followed the steps in Chapter 2, and are adding the OmniDrive to an existing network, go to the subsection "Connecting the Drive to the Network" in the omnidrive Setup Instructions. Then go to the Apple III

37 4 ' System Generation Guide Multiple Server Update Guide. When finished with the Multiple Server Update Guide, go to the Apple III System Manager's Guide. o If you followed the steps in Chapter 3, go to the Apple III System Manager's Guide to create volumes and users, and grant access. 32 Apple III

38 System Generation Guide 33 NAMES AND PASSWORDS A Disk server name: Disk server password: Drive name: Drive password: Apple III