TP200. User guide TP TUBE

Transcription

1 TP200 User guide TP TUBE

2 (( ( QUICK GUIDE 230V The box contains: 1 x TP200 One-Point-Speaker 1 x Power Cord 230V (2m) 1 x Table Stand 1 x User guide AUX All sound sources using MiniJack 3.5 output. RCA / line / phono, can be used with an adapter (accessory) General amplifier output can also be used with an adapter (accessory) Toslink S/PDIF TV - Amplifiers - CD Players - AppleTV - Playstation and many more... (( ( Bluetooth USB BT connections: iphone/ipod/ipad Android phones/tablets WindowsPhone/tablets PC Mac/Macbook... And other sources that can be paired and play via Bluetooth. USB from PC/Mac USB on-the-go 1 2

3 AUX/Line - Green light Connect your player with Mini Jack. To play through the mini-jack 3.5 input, simply select AUX source (green light) using the SOURCE button + Increases volume - lowers volume SOURCE - switch on and selects the input / source. A single short press switches the source - the source selected is shown by a color. (Keeping button pressed activates standby) The last used source is selected automatically, when turned on from standby mode. If there is no sound on the selected source. The SOURCE-button blinks slowly. (approximately 2 times / sec) AUX - Green Bluetooth - Blue Toslink - White USB - Purple Standby - Red Bluetooth - Blue light To play via BT, your player has to be paired with TP200. To do this, simply select the BT source with the Source button and then find -and choose TP200 + (serial number) in your Bluetooth menu on your BT-player-device (see its manual) Your device is now paired with TP200 - This is shown by the blue light going steady, insted of blinking. You are now ready to play audio from your Bluetooth device (see its manual) Toslink/SPDIF - White light Connect your source with optical cable. To play via Toslink / SPDIF input, simply select Toslink source (White light) using the SOURCE button. Using optical input for TV, we suggest using the remote control (Accessory) And set the digital output to PCM. Reset to factory settings Disconnect power (230V) 2 - Press and hold all 3 buttons at the same time 3 - While holding the 3 buttons - reconnect Power (230V) 4 - Release the 3 buttons. All Bluetooth parring and other settings are now reset to factory settings. USB - Purple light Connect your source with USB kabel. To play via the USB input, simply select the USB source (Purple Light) using the SOURCE button. Audio playback via USB (see computer / player manual) Adjustment and update via USB - see Features & Options 3 4

4 FEATURES & OPTIONS ADJUSTMENT & UPDATE Front - With different colors, it is possible to give TP200 your own unique expression. The front (optional) can be removed and changed to another color. (Always supplied with Black front) Wall Bracket - In the need of hanging your TP200 on the wall? you can use OP201 (optional accessory) Table Stand - Mandatory in the box with TP200 Remotecontrol - TPR1 (optional accessory) allows you to remotely control volume and other functions. Enable the patented HDSX function which is an audio feature that expands the stereo image. Or adjust the loudness and other functions With the remote control, these functions are available. HDSX On/Off Source toggle Loudness adjust TTC - Tone Tilt Control Bluetooth - Play/Pause/Forward/Back Mute/Sub-bas On/Off Volume up/down Limiter - To protect the devices and drivers, TP200 has a built in limiter, which prevents damaging the speaker at high volume. - This is warned with flashing red light in the indicator. Dynamic Loudness - Controlled by the built-in DSP Software for adjusting / Update is available for download on our website: SETUP & installation - Connect TP200 to a computer with USB cable. - Download the software TP_TubeSetup - Install - follow the video guide on the website, if necessary. - Open the setup program. With the program, this can now be changed: Loudness Tone Tilt Control HDSX on / off 5 band Equalizer Auto Level - Analog Remote click Reset to Factory Settings - These functions can be changed live while playing on the speaker. On the remote control (TPR1) the same functions are available (equalizer, auto level and remote click excluded), but the entered settings, changed in the setup program, will be Your own sound profile and the default setting on the remote s reset button - Factory settings - see page 3 Software update - Latest software is downloaded -and installed along with the SETUP program on: - Connect TP200 to computer with USB cable. - Open the Firmware Update program. - Driver will now automatically update (wait until this is finished!) - Then press UPDATE and the updateprogress starts - speaker turns off and then on again. - Your TP200 is now updated and ready to use. 5 See also our FAQ på 6

5 TP TUBE Safety - TP200 should not come in contact with water, nor vases containing water. - To avoid injury, always place TP200 securely. This applies table stand, floor stand or wall bracket. - To switch off the appliance, disconnect from the power socket. - Keep distance during audio playback - loud sound can cause permanent hearing damage. Declaration of EC-Conformity We: TP Radio Agenavej 37, 2670 Greve, Denmark Declare under our sole Responsibility that the Product: Product description: Model Name: Amplifier and stereo speaker TP200 Conforms to the essential requirements of Directives 2011/65/EC 2006/95/EC 2004/108/EC 2009/125/EC Restriction of Hazardous substances directive (RoHS) Low voltage directive (LVD) EMC directive Eco-design directive Applied standards and regulations: RoHS directive: EN 50581:2012 LVD: EN 60065:2002 with A1:2006, A11:2008, A2:2010, A12:2011 EN 62479:2010 EMC directive: EN 55032:2012 EN :2006 with A1:2009, A2:2009 EN :2008 Eco-design directive: Commission regulation No 1275/2008 Agenavej 37, 2670 Greve Denmark. Tel: Fax URL: Technical Manager Henrik Heise Pedersen Greve 27/ TP Tube Agenavej / 2670 Greve DK / info@tptube.dk / Please share your audio experience with TP200 on our facebook site: Information in this manual may change without notice. The latest version of the documentation is available on January 2015 All Rights Reserved