' 4. !Lt~ TURN ON, TUNE IN, ROCK OUT CONNECTING THE PHOENIX IF YOU HAVE ALREADY PAIRED TO THE PHOENIX BEFORE:

Size: px

Start display at page:

Download "' 4. !Lt~ TURN ON, TUNE IN, ROCK OUT CONNECTING THE PHOENIX IF YOU HAVE ALREADY PAIRED TO THE PHOENIX BEFORE:"

Martin Lewis
6 years ago
Views:

2 TURN ON, TUNE IN, ROCK OUT It's hip to be square. With a click-of-the-button connection, a rechargeable battery, and sound so loud you will have to hear it to believe it, The Phoenix gives the power you demand in the form of a cube. With no strings attached, what could be sweeter? Music is the drug. Share it. CONNECTING THE PHOENIX WIRELESS PAIRING THE PHOENIX AND YOUR MUSIC PLAYER: 1. Turn off any other Bluetooth device already connected to your phone or music player 2. Turn on the Bluetooth feature on your'phone or music player - IF PAIRING FOR THE FIRST TIME: 3. For the first time using the Phoenix, press and hold the power button to turn the Phoenix on. After 5 seconds, the light ring will slowly flash blue and the Phoenix will chirp loudly. (KEEP HOLDING THE BUTTON) After holding for another 5 seconds, the light ring will quickly flash blue. 4. While the light is flashing quickly, place your phone or music player in Bluetooth search more. The phone or music player will search for the Phoenix 5. Select "BEACON-Phoenix" from the list of found devices on your phone or music device 6. Select "Yes" to pair the Phoenix with your phone or music player 7. If prompted for a passcode, enter "0000" 8. After the Phoenix is successfully paired, the light statu~ ring will change from quickly flashing to steady blue. IF YOU HAVE ALREADY PAIRED TO THE PHOENIX BEFORE: 9. Press and hold the power button for 5 seconds to turn on the Phoenix. Your phone or music player will will reconnect with the speaker automatically and the light status ring will quickly flash blue, and then turn to a steady blue glow. NOTE: The Phoenix can be paired to multiple devices, but not at the same time. If the Phoenix is connected and activated on one device, you will not be able to successfully pair another device without disabling the Phoenix from one. TO CONNECT VIA AUXILIARY CABLE: To connect any other music player or device that is not bluetooth enabled, Use the 3.5mm auxiliary cable supplied with the Phoenix Speaker 1. Plug in the auxiliary cable to the back of the Phoenix. 2. The light status ring will turn blue and the Phoenix will automatically turn on 3. Plug the qther end of the auxiliary ~le into your headphone jack 4. Play music, enjoy, repeat. 786 BUTTONS AND FUNCTIONS: 1. Light Status Ring 2. Volume - and Previous track button 3. Volume + and Next track button ~ll: 4. Power On/Off and Play/ Pause button 5. Speakers 6. Auxiliary Port ' 7. Mini USB Socket 8. RESET hole ' 4!Lt~

3 CHARGING AND POWER: The Phoenix should take approximately 2-3 hours to charge and has a battery life of 5-7 hours depending on volume playback levels The Phoenix does operate and play while plugged in and charging. TO CHARGE: 1. The included USB cable has 2 sides - a large standard plug, and a mini USB plug. 2. Plug the Mini USB plug into the socket on the back of the Phoenix. 3. Plug the other end of the cable into a computer or any power adapter with a USB port. (sold separately) 4. During charging, the light status ring will glow red. When charging is complete the light will turn off. "' NOTE: The USB cable is used for ch_cfrging only- not for any data transfer BATIERIES: The Phoenix contains a built in, ultra-portable 850 ma Lithium battery. Please use caution and consult local authorities before disposing of this unit. ' BASIC OPERATION: Turn On: Press and hold the POWER button for about 5 seconds until the light status ring turns blue Turn Off: Press and hold the POWER button for about 5 seconds until the light status ring turns red Enter Pairing Mode: Press and hold the POWER button for about 1 0 seconds until the light status ring flashes quickly. Volume Up I Down: Press and hold the volume buttons. lhe Phoenix will chirp once either the highest or lowest setting has been reached. (Volume can be affected by the volume output of your phone or music player) Changing Track I Skipping Songs: Press the track buttons once. (Function only works when in ~luetooth connection mode) ~~ Pause I Play: Press the PLAY outton once NOTE: There are only 3 buttons on the top button panel of the Phoenix. The Volume and Track buttons are the same, an_d the POWER and PLAY buttons are the same. When pressing the button once, you will get a different function that when you press and hold the button.

4 TROUBLESHOOTING: PROBLEM: SOLUTION: The Phoenix turns off automatically Recharge the battery by plugging into a USB source Phoenix is turned on and paired, but no sound is playing. Make sure there is no cable plugged into the auxiliary jack No connection Make sure the Phoenix is charged and within range of the music player Make sure your bluetooth device is properly paired Cannot enter pairing mode Turn Phoenix off until no lights are glowing. Then press and hold the POWER button for approximately 1 0 seconds Audio playback is distorted ~ Make sure the music source file on your music device is of good quality. Make sure the battery is not extremely low on charge Not functioning correctly You can reset all function of the Phoenix back to factory settings by inserting a narrow object into the hole on the back of the Phoenix. The Phoenix will be turned off and you can then restart it. - '... GLOSSARY: Bluetooth: A universal technology that allows you to play music without a wired connection Pairing: The process of connecting the Phoenix Speaker to your phone or music player for the first time Paired: After going through the pairing process, your device will automatically remember the Phoenix and you can easily connect again. Connected: When your phone or music player is playing music on the Phoenix Lithium Battery: A rechargeable battery that is build into the Phoenix IMPORTANT SAFETY INSTRUCTIONS: 1. Keep these safety and operating instructi9ns for future use 2. Follow all operating instructions and adhefe to all warnings contained within this manual 3. Do not use next to any heat sources such as radiators, heaters, radiators, stoves or any other device that produces extreme heat. 4. To reduce the risk of fire or electrical shock, do not expose this product to rain or moisture. This product must not be exposed to any liquids or naked flames 5. Be mindful that this device contains an internal battery. Do not expose the battery to extreme heat. Disposal of this product should be in accordance with local regulations. If you are not sure how to proceed, contact your local authority. 6. Keep the device in an area with good ventilation while in use. 7. Only use attachments, accessories and cables supplied by the manufacturer 8. Have fun. Listen often. Tell your friends. BEACON AUDIO INC. 623 S. State Street STE A Salt Lake City, UT beaconaudio.com

6 available in: black, blue & red

8 TECHNICAL SPECIFICATIONS: Dimension: Weight: Battery: Working Distance: 3.2 x 3.2 x 2.9 inches 200 grams 850 mah Lithium feet Bluetooth Version: Operating Time: Charge Time: Charging Voltage: V2.1 + EDR Approx. 8 hours Approx. 2-3 hours 5V Charge Input Audio Input: Mini USB Port Bluetooth or Auxiliary port

BLUETOOTH "SOUNDBAR" WITH SUBWOOFER

BLUETOOTH SOUNDBAR WITH SUBWOOFER BLUETOOTH "SOUNDBAR" WITH SUBWOOFER Quick Installation Guide DA-10294 Thank you for purchasing DIGITUS DA-10294. Specially designed to play music through Bluetooth from your mobile phone or computer (through