Sanitary PT100 Temperature Sensors

Transcription

1 Sanitary PT1 Temperature Sensors This sensor assembly is generally used within the dairy, brewery & pharmaceutical industry where a sanitary process connection is required. It consists of a Pt1 sensing element housed in a stainless steel protective sheath with a Sanitary Din or SMS style process connection & a lag/standoff. These assemblies are generally of a high surface finish as required for such processes. The termination head which can be Aluminium, Plastic or Stainless Steel. Specification Material Body : Stainless steel AISI 316L (1.444) Surface Finish:.5RA Process Connection: Hygienic Sanitary Fitting Tri-Clover Din SMS - Custom Sensing Elements: PT1 Platinum Elements per IEC751 (alpha =.385 Ω/Ω/ C) Wiring: 2, 3 or 4 wire Configuration: Single or Duplex Element Accuracy : ±.3ºC to ±.3ºC depending upon class selection Operating Temperature: from -2 to + 65ºC selection dependant Output: Pt1 or 4/2mA Head Types: Aluminium Alloy, SS316, Plastic Protection: IP67 Accessories Fittings 4/2mA Transmitters Controllers

2

3 Model RTM15HY 25C 3W 4W SA DA Product Description RTD PT1 with Sanitary Fitting Maximum Operating Temperature C 25 C Sensor Wiring 3 Wire 4 Wire Sensor Configuration & Class Single Element Class A (±.15 C) Dual Element Class A (±.15 C) S1 D XXX Single Element Class 1/1th Din (±.3 C) Dual Element Class 1/1th Din (±.3 C) Sensor Sheath Diameter 6mm Diameter Stainless Steel (316L) 8mm Diameter Stainless Steel (316L) 1mm Diameter Stainless Steel (316L) U Sheath Length in mm Under Fitting Sensor Sheath Length Fitting Type & Size XXX XXX KN Specify Type & Size i.e. 1"Din, 1"SMS, 1"RJT Lag Length in mm Specify in mm length of Lag Standard 5mm Connection Head Aluminium Screw Cap Style IP Rating Cable Entry DinB Aluminium Removable Cap Style BUZ KNH Aluminium Flip Cap Style Dual Aluminium Screw Cap Style SCH5 Exd Aluminium Screw Cap Style XDA SS KNSS 316L SCH5SS KNB Exd Aluminium Screw Cap Style Exd Aluminium Screw Cap Style Exd Stainless Steel 316 Screw Cap Style Steel 316 Screw Cap Style Steel 316 Screw Cap Style Steel 316 Exd Screw Cap Style Bakelite Screw Cap Style KNW Polypropylene Screw Cap Style FL TB 5333A Termination Flying Leads Ceramic Din Style Termination Block 2-wire programmable transmitter PT1 Input 4/2ma Output 5331A 5333D 5331D 5337D 2-wire programmable transmitter Universal Input 4/2ma Output Ex Rated 2-wire programmable transmitter PT1 Input 4/2ma Output Ex Rated 2-wire programmable transmitter Universal Input 4/2ma Output Ex Rated 2-wire programmable transmitter Universal Input 4/2ma OutputHART 5 or HART 7 If Transmitter Selected Range Required in C (i.e. +1 C)

4 Sensor Configuration/Assembly Termination Heads Type: KN Type: KNSS Material: Stainless Steel 316 IP Rating: IP Rating: Type: KNB Type: KNW Material: Bakelite IP Rating: IP65 Type: 316 Material: Polypropylene IP Rating: IP65 Type: DinB Material: Stainless Steel 316 IP Rating: Cover Locking: Screws IP Rating:

5 Sensor Configuration/Assembly Termination Heads Type: BUZ Type: KNH Cover Locking: Screw Flip Top IP Rating: IP66 Type: KSE Cover Locking: Screw Flip Top IP Rating: Type: KSESS Cover Locking: Screw Cap IP Rating: IP67 Type: KSEB Material: Polypropylene IP Rating: IP65 Type: KF IP Rating: Cover Locking: Screws IP Rating:

6 Sensor Configuration/Assembly Termination Heads Type: SCH15 Type: SCH4 Material: Stainless Steel 316L Cover Locking: Screw Cap IP Rating: Type: SCH5 Material: ABS Plastic Cover Locking: Screw Cap IP Rating: Cover Locking: Screw Cap IP Rating: Type: XDA Ex d flame Proof Connection Head Ex d Atex & IECEx APPROVED Base 1 or 2 side entries Aluminium Epoxy Painted or Stainless Steel Construction Type: XDS EEx d IIC T6 Material: Stainless Steel 316 IP Rating: IP Rating:

7 Sensor Configuration/Assembly Termination Heads Type: 751 Cover Locking: Screw Cap IP Rating: Ex d flame Proof Connection Head Ex d Atex & IECEx APPROVED Aluminium Epoxy Coated or Stainless Steel Construction

8 Sensor Configuration/Assembly Termination Heads Type: 5333A Type: 5333D Type: 5331A3B 2-wire programmable transmitter 5333A RTD or Ohm input High measurement accuracy 3-wire connection Programmable sensor error value For DIN form B sensor head mounting Type: 5331D 2-wire programmable transmitter 5333D RTD or Ohm input High measurement accuracy 3-wire connection Programmable sensor error value For DIN form B sensor head mounting 2-wire programmable transmitter 5331A RTD, TC, Ohm, or mv input Extremely high measurement accuracy 1.5 kvac galvanic isolation Programmable sensor error value For DIN form B sensor head mounting Type: 5337D Type: wire programmable transmitter 5331D RTD, TC, Ohm, or mv input Extremely high measurement accuracy 1.5 kvac galvanic isolation Programmable sensor error value For DIN form B sensor head mounting 2-wire transmitter with HART protocol 5337D RTD, TC, Ohm, and bipolar mv input 2 analog inputs and 5 device variables with status available HART protocol revision selectable from HART 5 or HART 7 Hardware assessed for use in SIL applications Mounting in hazardous gas and dust area Field mounted HART temperature transmitter 751 RTD, TC, Ohm, and bipolar mv input and analog output High definition local operator interface (LOI) with 3 optical buttons Selectable red or white backlight Ex d explosion proof / flame proof HART 7 functionality with HART 5 compatibility Full Transmitter Specification Can Be Viewed Via Transmitter Datasheet

9 PT1 TEMPERATURE / RESISTANCE TABLE C C

10 PT1 TEMPERATURE / RESISTANCE TABLE C C