Temperature Measurement SITRANS TS300

Transcription

1 Siemens AG 018 For food, pharmaceuticals and biotechnology modular design Dimensional drawings Cable gland M1x1.5 for cable Ø ( ) Ø 60 (.36) Ø d = N + H 1 Ø 50.5 (1.99) U X H 1 N H Ø D3 Ø D Measuring insert length Ød Measuring insert outer diameter (6 (0.4)) Process connection outer diameter 3 Protective pipe inner diameter H Head height H 1 Type Axx = 41 (1.61) Type xx = 6 (1.0) N Nominal length U Insertion length X Extension length modular design, dimensions in mm (inch) /48 Siemens FI

2 Siemens AG 018 For food, pharmaceuticals and biotechnology modular design Selection and Ordering data Article No. Order code 7MC8005- for food, pharmaceuticals and biotechnology, modular design for installation in pipelines and vessels Click on the Article No. for the online configuration in the PIA Life Cycle Portal. Head Stainless steel head, S0, screw cover 5 (Standard version) Aluminum head, A0, flange cover standard 1 Plastic cover, M0, srew cover Aluminum head, 0, hinged cover low 3 Aluminum head, C0, hinged cover high 4 9 H 1 Y Process connection, material or /316L Milk pipe union to DIN with slotted union nut and nominal diameter/pressure DN 5/PN 40 A A DN 3/PN 40 A DN 40/PN 40 A C DN 50/PN 5 A D Clamp connection: ISO 85 DIN 3676 Tri-Clamp Outer diameter D ½"/ ¾" 5.0 mm C A DN 5/ 33.7/38 DN 5/3/40 1", 1½" 50.5 mm C DN 40/51 DN 50 " 64.0 mm C C DN 63.5 ½" 77.5 mm C D DN 88.9 DN mm C E Varivent connection (Tuchenhagen) D 6 = 50 mm (1.97 inch), K U for Varivent housing DN 5 and DN 1" D 6 = 68 mm (.68 inch), K V for Varivent housing DN and 1½"... 6" NEUMO/ioControl Size 5 A Size 50 Size 65 C Ingold flange DN 5 with hexagon union nut G 1¼", J A mounting length 40 mm (1.57"), diameter 4.8 mm (0.98") incl. O-ring Welding piece L A (sphere diameter 30 x 40 mm (1. x 1.6 inch) long) Z A Type of screwed gland and nominal diameter Protective tube Measuring insert Ø D = 6 mm Ø 3/3. mm, 1 (0.4 inch) (0.1/0.13 inch) miner. insul. Ø D =9 mm Ø 6 mm (0.4 inch) (0.35 inch) Ø D =9 mm Ø 6 mm (0.4 inch) 3 (0.35 inch) miner. insul. Ø D =9 mm (0.35 inch) tapered tip D =5 Ø x 0 mm (0. x 0.79 inch) Ø 3/3. mm, (0.1/0.1 inch) miner. insul. 4 J 1 Y 9 L 1 Y Selection and Ordering data Article No. Order code 7MC8005- for food, pharmaceuticals and biotechnology, modular design for installation in pipelines and vessels Neck tube length X 65 mm (.56 inch) [M = 80 mm (3.15 inch)] mm (5.1 inch) [M = 145 mm (5.71 inch)] 9 N 1 Y Insertion length Enter customer specific length with Y44, see Order codes below 15 mm (0.59 inch) mm ( inch) C Initial: 35 mm (1.38 inch) mm ( inch) D Initial: 50 mm (1.97 inch) mm ( inch) E Initial: 100 mm (3.94 inch) mm ( inch) F Initial: 160 mm (6.30 inch) mm ( inch) G Initial: 50 mm (9.84 inch) mm ( inch) H Initial: 400 mm (15.75 inch) inch, Initial: 4 inch J inch, Initial: 6 inch K inch, Initial: 9 inch L Z P 1 Y Sensor Thin-film technology: measuring range C ( F) x Pt100, class A, three-wire G 1 x Pt100, class A, four-wire H Z Q 1 Y Further designs Order code Add "-Z" to Article No. and add Order code Process connection completely electropolished P01 Hygiene version H01 (R a < 0.8 m (3.1 x 10-5 inch)) Certificates Roughness depth measurement R a certified by factory certificate to EN C18 Material certificate to EN C1 TAG plate made of stainless steel Y15 specify TAG No. in plain text Test report (at 0, 50 and 100%) Y33 specify measuring range in plain text If optional head transmitters are integrated, please note that all calibration points are located in the set measuring range. If the points are located outside the standard measuring range, a Y01 addition is always required. Insertion length customer-specific Y44 Select range, enter desired length in plain text (No entry = standard length) Siemens FI /49

3 Siemens AG 018 For food, pharmaceuticals and biotechnology modular design Dimensional drawings Conical connection with union nut according acc. to DIN Tri-Clampconnection Clamp- connection acc. to DIN 3676 or ISO 85 all weld sleeve all 30 x 40 (1.18 x 1.58) D6=30 (1.81) 6 6 G1A without dead space due to conical metal cone G1A Varivent connection 6 Øda NEUMO iocontrol 6 Ingold connection DN 5 with union nut SW 46 L=40 (1.58) Ø4.8 (0.98) O-ring EPDM Protective pipe design based on DIN 4377 U Form 3 (0.1) Similar to form 3 tapered tip U 0 (0.79) 3 (0.1) Process connections, dimensions in mm (inch) /50 Siemens FI

4 Siemens AG 018 For food, pharmaceuticals and biotechnology modular design Selection and Ordering data Order code Further designs Add "-Z" to Article No. and specify Order code. uilt-in head transmitter Measuring range to be set must be specified with plain text data "Y11". SITRANS TH100, ma, Pt100 T10 SITRANS TH100 Ex i (ATEX), ma, Pt100 T11 SITRANS TH00, ma, universal T0 SITRANS TH00 Ex i(atex), ma, universal T1 SITRANS TH300, HART, universal T30 SITRANS TH300 Ex i (ATEX), HART, universal T31 SITRANS TH400 PA, universal T40 SITRANS TH400 PA Ex i, universal T41 SITRANS TH400 FF, universal T45 SITRANS TH400 FF Ex i, universal T46 Transmitter options Transmitter, enter complete setting in plain text Y11 (Y11:+/-NNNN... +/-NNNN C,F) Enter measuring point (max. 8 characters) in plain Y17 text Transmitter, enter measuring point description (max. Y3 16 characters) in plain text Transmitter, enter measuring point text Y4 (max. 3 characters) in plain text Transmitter, enter bus address in plain text Y5 Transmitter, fail-safe value 3.6 ma U36 (instead of.8 ma) Transmitter with a SIL conformity C0 Transmitter with a SIL /3 conformity C3 Transmitter test protocol (5 points) C11 Further options Connection form, flying leads (for the direct transmitter assembly, delivery without screws and springs) G01 M1 device plug (in combination with 1x Pt100 G1 and/or transmitter, Non-Ex) Option not found? Specify special version in plain text Y98 Process number for the special version Y99 Accessories, see page /38. Siemens FI /51

5 Siemens AG 018 For food, pharmaceuticals and biotechnology clamp-on design Dimensional drawings Vibration-locking-screw Mounting screws 3 Process pipeline 4 Temperature sensor 5 Thermal decoupling 6 Spring load 7 Electrical connection M1 8 Replaceable measuring insert 9 Heat insulated pipe collar 3 1 Resitance thermometer with protection pipe in Clamp-on design /5 Siemens FI

6 Siemens AG 018 For food, pharmaceuticals and biotechnology clamp-on design Selection and Ordering data Article No. Ord. code 7MC for food, pharmaceuticals and biotechnology Clamp-on design for the measuring of the pipe surface temperature Click on the Article No. for the online configuration in the PIA Life Cycle Portal. Design Acc. to IEC 60751, class A 1 [ C ( F)] Type of connection Device plug M1 x 1 A connection head form, stainless steel ma compact transmitter C SITRANS TH100slim (standard measuring range C ( F)) Mounting with pipe collar Pipe outer-ø mm (inch) 4 (0.16) Collar size mm (inch) A1 6 (0.4) (0.5) C1 8 (0.31) D (0.37) E1 10 (0.39) F (0.40) 50 x 35 x 0 G1 (1.97x1.38x0.79) 10.3 (0.41) H1 1 (0.47) J (0.50) K1 13 (0.51) L (0.53) M (0.54) N1 14 (0.55) P (0.6) Q1 16 (0.63) R1 17. (0.68) S (0.71) A 19.0 (0.74) (0.75) C 0.0 (0.79) D 1.3 (0.84) E.0 (0.87) F 3.0 (0.90) G 4.0 (0.94) H 5.0 (0.98) J 5.4 (1.00) K 6.7 (1.05) L 6.9 (1.06) M 70 x 70 x (1.10) (.76x.76x0.79) N 9.0 (1.14) P 30.0 (1.18) Q 31.8 (1.5) R 3.0 (1.6) S 33.4 (1.31) T 33.7 (1.33) U 34.0 (1.34) V 35.0 (1.38) W 36.0 (1.4) X 38.0 (1.49) Y Selection and Ordering data Article No. Ord. code for food, pharmaceuticals and biotechnology Clamp-on design for the measuring of the pipe surface temperature 7MC (1.50) A (1.61) (1.67) C (1.75) D (1.90) 90 x 85 x 0 E (.00) (3.54 x 3.35 x 0.79) F (.09) G (.13) H (.4) J 3 Always indicate external tube diameter for 1) : Installation with tube collar and deviating external tube diameter (S11-S19) Securing with clamps (S1-S3) Clamping band installation (S31-S35) Z 0 K1 Y 1) Special sizes for pipe outer diameters: In order to process "Z0" special sizes, the following two additional items of information are essential: - the required diameter specified in plain text under "K1Y" - Selection of the corresponding pipe collar, clamping band or clamping bracket size (Order codes "S11" to "S35") Recommended for all versions: Heat-conductive-compound, siliconefree, syringe 3 g, Order code: L15 (see page /55) Siemens FI /53

7 Siemens AG 018 For food, pharmaceuticals and biotechnology clamp-on design Dimensional drawings Measuring transducer with device plug M1x1 Field housing, screw cap Material stainless steel IP 67 Ø60 (.36) 11.5 (0.45) Device plug M1x1 max. 9 (1.41) 94 (3.70) ~ 83.5 (3.70) 51 (.01) Electrical connection can be rotated by ± 170 Device plug M1x1 19 (0.75) Cable gland M1x1.5 for cable Ø ( ) Clamp-on, clamping block installation for pipelines Ø ( ) 0 (0.79) Clamp-on, clamping band installation with hose clamps for pipelines Ø10... ca. 300 ( ca.11.81) 36 (1.4) 37 (1.46) Cable gland M16x1.5 for cable Ø ( ) 3 (0.91) A C Example Ø1 (4.76) 19 (0.75) Clamp-on, latch fastener installation for pipelines Ø ( ) A Pipe radius 3 (0.1) C 6 (0.4) 0 (0.79) Pipe diameter C ( ) (1.18) (1.38) ( ) (1.57) (.36) ( ) (1.97) (3.15) Latch fastener version Pipe diameter A C H ( ) (0.79) (1.18) (1.38) (3.11) ( ) (1.18) (1.57) (.76) (3.90) ( ) (1.57) (1.97) (3.35) (4.68) Standard version Clamp-on design, device plug, field housing, cable gland, variants, dimensions in mm (inch) /54 Siemens FI

8 Siemens AG 018 For food, pharmaceuticals and biotechnology clamp-on design Selection and Ordering data Further designs Add "-Z" to Article No. and specify Order code. uilt in head transmitter Measuring range to be set must be specified with plain text data "Y11". SITRANS TH100, ma, Pt100 SITRANS TH100 Ex i (ATEX), ma, Pt100 SITRANS TH00, ma, universal SITRANS TH00 Ex i (ATEX), ma, universal SITRANS TH300, HART, universal SITRANS TH300 Ex i (ATEX), HART, universal SITRANS TH400 PA, universal SITRANS TH400 PA Ex i, universal SITRANS TH400 FF, universal SITRANS TH400 FF Ex i, universal Transmitter options Transmitter, enter complete setting in plain text (Y11:+/-NNNN... +/-NNNN C,F) Enter measuring point (max. 8 characters) in plain text Transmitter, enter measuring point description (max. 16 characters) in plain text Transmitter, enter measuring point text (max. 3 characters) in plain text Transmitter, enter bus address in plain text Transmitter, fail-safe value 3.6 ma (instead of.8 ma) Transmitter with a SIL conformity Transmitter with a SIL /3 conformity Transmitter test protocol (5 points) Other cable gland (only for connection head) Polyamide for cable diameter mm ( inch) Stainless steel for cable diameter 3 6,5 mm ( inch) Device plug M1 x 1 Order code T10 T11 T0 T1 T30 T31 T40 T41 T45 T46 Y11 Y17 Y3 Y4 Y5 U36 C0 C3 C11 K0 K03 K11 Deviating pipe; mm (inch) Collar size; mm (inch) ( ) 50 x 35 (1.97 x 1.38) S ( ) 70 x 70 (.76 x.76) S (1.5.4) 90 x 85 (3.54 x 3.35) S13 Larger nominal diameters on request S19 Space-saving mounting (latch fastening) Outer pipe; mm (inch): ( ) S ( ) S (Clamping band version recommended, see below) ( ) S3 (Clamping band version recommended, see below) Clamping band installation Outer pipe; mm (inch): ( ) S ( ) S3 Without clamping band S35 Selection and Ordering data Further Options Assignment marking, engraving instead of adhesive label (Serial number and pipe diameter on plug and plastic block) L11 mm drain hole L1 Sensor 4-wire connection L14 Heat-conductive-compound, silicone-free, syringe 3 g L15 Suffixes Add "-Z" to Article No. and specify Order code and plain text. TAG plate made of stainless steel (specify TAG No. in plain Y15 text) Test report at 0 %, 50 % and 100 % (specify the measuring Y33 range in plain text) If optional head transmitters are integrated, please note that all calibration points are located in the set measuring range. If the points are located outside the standard measuring range, a Y01 addition is always required. Special version, specify in plain text Y98 Process number for special version Y99 Order code Accessories, see page /38. Ordering examples: Deviating tube diameter 8.5 mm: 7MC8016-1AZ00-Z K1Y+S1 {K1Y: 8.5 mm} Space-saving mounting, tube diameter 38 mm: 7MC8016-1AZ00-Z K1Y + S3 {K1Y: 38 mm}; as of diameter 18 mm, we recommend using the clamping band installation. Clamping band installation, tube diameter 111 mm: 7MC8016-1AZ00-Z K1Y+S3 {K1Y: 111 mm} Siemens FI /55