Operating Onkyo Products Using the Remote Controller

Transcription

1 Operating Onkyo Products Using the Remote Controller The RC557M/558M remote controller is a useful tool that can operate not only the TXNR000/TXNR5000E, but also all the other components of your home theater. To operate any component other than the TXNR000/ TXNR5000E with the RC557M/558M remote controller, press the [] button and use the scroll wheel to select the component to operate. Before operating a digital component including satellite tuner, cable, VCR, and with the RC557M/558M, you need to program the remote control codes of the operated digital component into the RC557M/558M. There are two methods. One method is selecting the name of a different brand from the table, entering the setting number listed, and calling up the preprogramming code (See page 0). The other method is sending the commands from the other brand s remote control directly into this remote controller (See page 6). Operating Onkyo Products Using the Connection Connecting your compatible Onkyo CD player, MD recorder, DVD player, or cassette recorder to the TXNR000/TXNR5000E via allows you to control your system with the TXNR000/TXNR5000E s remote controller by pointing it at the TXNR000/ TXNR5000E. Since you don t have to enter any special codes, or do any programming, allows you to control these components quickly and easily. See page 7 for connection information. Note: To use the function, you must make an connection and an analog RCA/phono connection between the AV component and your TXNR000/TXNR5000E, even if they are connected digitally. Press the [] button. your favorite When operating the Onkyo DVD player, select DVD. When operating the Onkyo CD player, select CD. When operating the Onkyo MD player, select MD. When operating the Onkyo cassette tape deck, press the scroll wheel to display AMP. Point the remote controller toward the front panel of the TXNR000/ TXNR5000E, and press the appropriate buttons for your operation. DVD Mode DVD mode is used to control an Onkyo DVD player connected to the TXNR000/TXNR5000E via. To select DVD mode, press the [] button, and then roll the scroll wheel until DVD appears on the display. Note: While neither the [] button nor [] button is illuminated, rolling the scroll wheel changes the input source and remote controller mode simultaneously (when you enter the DVD mode, be sure that the LCD display shows DVD in both of the top and bottom ' / ABC DEF GHI JKL MNO PQRS TUV WXYZ 0 0 CLEAR # / DIRECT TUNING DIMMER T V PREV ON DISPLAY REC MAIN A MAIN B AUDIO REPEAT REPEAT VIDEO MUSIC PHOTO PLAYLIST STANDBY 5 6 MACRO DISC SURR PURE A TEST TONE Scroll wheel TOP MENU SERVER EXIT RETURN SUBTITLE THX AB DIRECT SEL ENTER MENU AUDIO ADJ GUIDE SETUP ANGLE ALL ST SEAR LEVEL ZONE SLEEP RANDOM LAST M STEREO MEMORY LEVEL ALBUM AR TIST GENRE AUDIO SEL DSP L NIGHT DSP ReEQ CAPS DELETE LANGUAGE LOCATION RC557M RC558M I ZONE

2 Operating Onkyo Products Using the Remote Controller Continued ON button This button is used to turn on the DVD player. STANDBY button This button is used to set the DVD player to Standby. Number/letter buttons These buttons are used to enter title, chapter, and track numbers and to enter times for locating specific points in time. button This button is used with the scroll wheel to select the remote controller modes. Press this button first, and then roll the scroll wheel until DVD appears on the display. 5 TOP MENU button This button is used to select a DVD s top menu. 6 Up/Down/Left/Right [ ]/[ ]/[ ]/[ ] & ENTER buttons These buttons are used to navigate DVD menus and the DVD player s onscreen setup menus. The [ENTER] button is used to start playback of the selected menu title, chapter, or track and to confirm settings. 7 /DISC / button This button is used to select discs on a DVD changer. 8 RETURN/EXIT button This button is used to exit the DVD player s onscreen setup menu and to restart menu playback. 9 DISPLAY button This button is used to display information about the current disc, title, chapter, or track, including the elapsed time, remaining time, total time, and so on. 0 Previous/Next [ ]/[ ] buttons The Previous [ ] button is used to select the previous chapter or track. During playback it selects the beginning of the current chapter or track. The Next [ ] button is used to select the next chapter or track. A FR/FF [ ]/[ ] buttons The FR [ ] button is used to start fast reverse. The FF [ ] button is used to start fast forward. B Pause [ ] button This button is used to pause DVD playback. C Step/Slow [ ]/[ ] buttons These buttons are used for framebyframe playback and slowmotion playback. D SUBTITLE button This button is used to select subtitles. E AUDIO button This button is used to select foreign language soundtracks and audio formats (e.g., Dolby Digital or DTS). F REPEAT button This button is used to set the repeat playback functions. G AB button This button is used to set the A B repeat playback function. H Open/Close [ ] button This button is used to open and close the disc tray. I LIGHT button This button is used to turn on or off the remote controller s illuminated buttons. J CLEAR button This button is used to cancel functions and to clear entered numbers. K button This button is used to select the input source. Press this button first, and then roll the scroll wheel until DVD appears on the display. L MENU button This button is used to select a DVD s menu. M button This button is used to set the volume of the TXNR000/TXNR5000E. N SETUP/GUIDE button This button is used to access the DVD player s onscreen setup menus. O button This button is used to mute the TXNR000/ TXNR5000E. This function can be set only with the remote controller. P Play [ ] button This button is used to start DVD playback. Q Stop [ ] button This button is used to stop DVD playback. R RANDOM button This button is used with the random playback function. S ANGLE button This button is used to select different camera angles. T LAST M button This button is used with the last memory function, which allows you to resume DVD playback from where you left off. U MEMORY button This button is used with the memory playback function, which allows you to create a custom playlist of titles, chapters, or tracks. V SEAR button This button is used to search for titles, chapters, tracks, and specific points in time. 5

3 Operating Onkyo Products Using the Remote Controller Continued CD Mode CD mode is used to control an Onkyo CD player connected to the TXNR000/TXNR5000E via. To select CD mode, press the [] button, and then roll the scroll wheel until CD appears on the display. Note: While neither the [] button nor [] button is illuminated, rolling the scroll wheel changes the input source and remote controller mode simultaneously (when you enter the CD mode, be sure that the LCD display shows CD in both of the top and bottom ' / ABC DEF GHI JKL MNO PQRS TUV WXYZ 0 0 CLEAR # / DIRECT TUNING DIMMER T V PREV ON DISPLAY REC MAIN A MAIN B AUDIO REPEAT REPEAT VIDEO MUSIC PHOTO PLAYLIST STANDBY 5 6 MACRO DISC SURR PURE A TEST TONE Scroll wheel TOP MENU SERVER EXIT RETURN SUBTITLE THX AB DIRECT SEL ENTER MENU AUDIO ADJ GUIDE SETUP ANGLE SEAR ZONE SLEEP RANDOM LAST M MEMORY ALBUM AR TIST GENRE AUDIO SEL ALL ST DSP LEVEL L NIGHT STEREO LEVEL ReEQ CAPS DELETE LANGUAGE LOCATION RC557M RC558M I ZONE DSP Boxed numbers are for MiniDisc mode (See page 7). ON button This button is used to set the CD player to On or Standby. Number/letter buttons These buttons are used to enter track numbers. button This button is used with the scroll wheel to select the remote controller modes. Press this button first, and then roll the scroll wheel until CD appears on the display. /DISC / button This button is used to select discs on a CD changer. 5 DISPLAY button This button is used to display information about the current disc or track, including the elapsed time, remaining time, total time, and so on. 6 Previous/Next [ ]/[ ] buttons The Previous [ ] button is used to select the previous track. During playback it selects the beginning of the current track. The Next [ ] button is used to select the next track. 7 FR/FF [ ]/[ ] buttons The FR [ ] button is used to start fast reverse. The FF [ ] button is used to start fast forward. 8 Pause [ ] button This button is used to pause CD playback. 9 REPEAT button This button is used to set the repeat playback functions. 0 Open/Close [ ] button This button is used to open and close the disc tray. A LIGHT button This button is used to turn on or off the remote controller s illuminated buttons. B CLEAR button This button is used to cancel functions and to clear entered numbers. C button This button is used to select the input source. Press this button first, and then roll the scroll wheel until CD appears on the display. D button This button is used to set the volume of the TXNR000/TXNR5000E. E button This button is used to mute the TXNR000/ TXNR5000E. This function can be set only with the remote controller. 6

4 Operating Onkyo Products Using the Remote Controller Continued F Play [ ] button This button is used to start CD playback. G Stop [ ] button This button is used to stop CD playback. H RANDOM button This button is used with the random playback function. I MEMORY button This button is used with the memory playback function, which allows you to create a custom playlist of tracks. MiniDisc Mode MiniDisc mode is used to control an Onkyo MiniDisc recorder connected to the TXNR000/TXNR5000E via. To select MiniDisc mode, press the [] button, and then roll the scroll wheel until MD appears on the display. Note: While neither the [] button nor [] button is illuminated, rolling the scroll wheel changes the input source and remote controller mode simultaneously (when you select TAPE as the top line, MD appears in the bottom line). ON button This button is used to set the MiniDisc recorder to On or Standby. Number/letter buttons These buttons are used to enter track numbers and to enter times for locating specific points in time. button This button is used with the scroll wheel to select the remote controller modes. Press this button first, and then roll the scroll wheel until MD appears on the display. DISPLAY button This button is used to display information about the current disc or track, including the elapsed time, remaining time, total time, and so on. 5 Previous/Next [ ]/[ ] buttons The Previous [ ] button is used to select the previous track. During playback it selects the beginning of the current track. The Next [ ] button is used to select the next track. 6 FR/FF [ ]/[ ]buttons The FR [ ] button is used to start fast reverse. The FF [ ] button is used to start fast forward. 7 Pause [ ] button This button is used to pause MiniDisc playback. 8 REC [ ] button This button is used to start MiniDisc recording. 9 REPEAT button This button is used to set the repeat playback functions. 0 Eject [ ] button This button is used to set eject the MiniDisc. A LIGHT button This button is used to turn on or off the remote controller s illuminated buttons. B CLEAR button This button is used to cancel functions and to clear entered numbers. C button This button is used to select the input source. Press this button first, and then roll the scroll wheel until TAPE appears on the display. D button This button is used to set the volume of the TXNR000/TXNR5000E. E button This button is used to mute the TXNR000/ TXNR5000E. This function can be set only with the remote controller. F Play [ ] button This button is used to start MiniDisc playback. G Stop [ ] button This button is used to stop MiniDisc playback. H RANDOM button This button is used with the random playback function. I MEMORY button This button is used with the memory playback function, which allows you to create a custom playlist of tracks. 7

5 Operating Onkyo Products Using the Remote Controller Continued Tape Mode Tape mode is used to control an Onkyo cassette recorder connected to the TXNR000/TXNR5000E via. To select Tape mode, press the scroll wheel, placing your remote controller into AMP Note: While neither the [] button nor [] button is illuminated, rolling the scroll wheel changes the input source and remote controller mode simultaneously (when you select TAPE as the top line, AMP appears in the bottom ' / ABC DEF GHI JKL MNO PQRS TUV WXYZ 0 0 CLEAR # / DIRECT TUNING DIMMER T V PREV ON DISPLAY ENTER REC MAIN A MAIN B AUDIO REPEAT STANDBY 5 6 MACRO DISC SURR Scroll wheel TOP MENU SERVER EXIT RETURN SUBTITLE THX AB I MENU AUDIO ADJ GUIDE SETUP ANGLE ALL ST SEAR ZONE ZONE SLEEP RANDOM LAST M STEREO MEMORY button This button is used with the scroll wheel to select the remote controller modes. Press the scroll wheel until AMP appears on the display. Previous/Next [ ]/[ ] buttons The Previous [ ] button is used to select the previous track. During playback it selects the beginning of the current track. The Next [ ] button is used to select the next track. The Previous/Next [ ]/[ ] buttons may not work properly with some cassette tapes depending on how they were recorded. Rewind/FF [ ]/[ ] buttons The Rewind [ ] button is used to start rewind. The FF [ ] button is used to start fast forward. REC [ ] button This button is used to start tape recording. 5 LIGHT button This button is used to turn on or off the remote controller s illuminated buttons. 6 button This button is used to select the input source. Press this button first, and then roll the scroll wheel until TAPE appears on the display. 7 button This button is used to set the volume of the TXNR000/TXNR5000E. 8 button This button is used to mute the TXNR000/ TXNR5000E. This function can be set only with the remote controller. 8 Play [ ] button This button is used to start tape playback. 0 Stop [ ] button This button is used to stop tape playback. A Reverse Play [ ] button This button is used to start reverse playback. PURE A DIRECT DSP DSP REPEAT VIDEO MUSIC PHOTO TEST TONE PLAYLIST LEVEL SEL LEVEL ALBUM AR TIST GENRE AUDIO SEL L NIGHT ReEQ CAPS DELETE LANGUAGE LOCATION RC557M RC558M 8

6 Using the Remote Controller with Other Components You can use the TXNR000/TXNR5000E s remote controller (RC557M/558M) to control your other AV components, including those made by other manufacturers. To do this you can: Enter a remote control code for the component that you want to control (e.g., DVD,, VCR). Learn commands directly from the other component s remote controller (see page 6). Use the Macro function to learn a sequence of actions (see page 7). 5 Use the number buttons to enter the digit remote control ' / ABC DEF 5 6 GHI JKL MNO PQRS TUV WXYZ 0 If the code is accepted, the following appears on the display for a while, and then the normal display reappears. Entering a Remote Control Code By entering the appropriate remote control code for each of your components, you can control each component by selecting the relevant remote controller mode: DVD,, VCR, CBL (cable), or SAT (satellite). Look up the appropriate remote control code for the component. See Remote Control Codes on pages 0. Press and hold down the [CUS TOM] button for more than three seconds. PRGRM, and then press the scroll the the remote controller mode you want to use with the component, and then press the scroll The following remote controller modes can be selected: DVD,, VCR, CBL, or SAT. If the code is not accepted, after the message RETRY has been displayed, the code entry display reappears, and you should try entering the code again. To cancel this procedure at any point, press the [] button. 6 Select the remote controller mode, point the remote controller at the component, and check its operation. The remote controller buttons that can be used in DVD mode are shown on page. Those that can be used with the, VCR, CBL, and SAT modes are listed on pages and 5. Remote Control Codes for an Onkyo DVD player The remote control code that you use with an Onkyo DVD player depends on whether it s connected via, as follows: 500: Use this code if you ve connected an cable and an RCA/phono analog audio connection cable to your DVD player. This is the default setting, so if you re using, you don t need to change it. Point the remote controller at the TXNR000/ TXNR5000E to operate the DVD player. 500: Use this code if your DVD player doesn t have an socket, or you re not using. Point the remote controller at the DVD player to operate it. 9

7 Using the Remote Controller with Other Components Continued 0 Remote Control Codes When two or more codes are given, try each one in turn, and choose the one that works best. DVD (DVD player) Aiwa 500 Akai 509 Apex 505, 506 CyberHome 507 Denon 507, 500 GE 500 Hitachi 5009 Integra 500, 500 Integra Research 500, 500 JVC 50 Kenwood 507 Magnavox 500, 50 Marantz 505, 506 Mitsubishi 5005 Onkyo 500, 500 Panasonic 50, 507, 500 Philips 500, 50, 508 Pioneer 5006 Proscan 500 RCA 500 Sanyo 50 Sony 5007, 50, 508, 509 Technics 500 Thomson 50, 50 Toshiba 5008, 50 Xbox 50 Yamaha 500 Zenith 50, 50 SAT (satellite tuner) Alba 0, 07, 05, 07 Allsat 05, 07 Alltech 0, 05 Amstrad 0, 09, 05, 00, 0 Anglo 05 Ankaro 05 Anttron 07 Apollo 07 Arcon 06 Armstrong 0 Asat 06 Astra 0, 06, 0 Astro 09, 00 AudioTon 05 Bush 0, 0 Condor 0 Conrad 0 Cosat 05, 0 Crown 0 SAT (satellite tuner) Daewoo 06, 07, 05 Diamond 0 Dishnet 008 Dual 06 Echostar 00, 08, 05 Einhell 0, 07, 05 Elta 05, 07 Engel 05 Eurosat 0, 0 Eurosky 0, 0 Eurostar 0 Fagor 05, 0 Ferguson 0 Fidelity 00 Fracarro 07 FTE 05, 00 Fuba 07 Galaxis 05, 0 GE 00, 00 General Instruments 00 GMI 0 Grundig 0, 09, 0 Hinari 07 Hirschmann 09, 05 Hitachi 06, 07 Hughes Network Systems 0 Huth 0, 05, 0 Imperial 0 Intertronic 0 Intervision 05, 0, 0 Johansson 05 JVC 009, 0 Kathrein 05 Kolon 07 KSAT 05 Kyostar 07 Lasat 0, 00, 0 Lenco 06, 07, 05 Lennox 0 Loewe 0 Lorenzen 0 Macab 0 Manhattan 05, 00, 0 Maspro 0, 05 Matsui 0 Mediamarkt 0 Medion 05 Metronic 0, 07, 00 Micro Technology 05 Minerva 0 Morgan s 0, 05, 05 Mysat 05 Neuhaus 09, 0, 0, 05 Neusat 05 Nikko 0, 05, 07 Nokia 0 Nordmende 07, 00 SAT (satellite tuner) Oceanic 0 Octagon 06, 07 Okano 0 Optex 05, 0 Orbit 06 Orbitech 07, 09 Pace 0, 06, 0 Pacific 0 Palladium 0, 07, 0 Palsat 09 Panasonic 006, 0 Panda 0 Philips 0, 09 Phonotrend 05, 0 Predki 07 Premier 0 Primestar 007 Proscan 00, 00 Protek 0 Pye 0 Quelle 0 Radix 05 RCA 00, 00 Roadster 05 Rover 05 Saba 0, 00, 0, 07 Samsung 07 Satcom 0 SatPartner 07, 00, 07, 00 Schneider 09 Sedea Electronique 07 Seemann 0 SEG 07, 08 Seleco 05, 0 Skymaster 05, 0 Skyvision 05 Sony 005, 0 Strong 06, 07, 00 Sunstar 0 Techniland 05, 0 TechniSat 09 Teco 0, 06 Teleciel 07 Telefunken 07 Teleka 0 Telemaster 00 Telewire 05, 0 Tensai 06 Thomson 0, 05 Thorens 0 Tonna 05, 0, 05 Toshiba 00 Triasat 09 Tristar 06 Unisat 0

8 Using the Remote Controller with Other Components Continued SAT (satellite tuner) Manufacturer Control code Universum 0, 0 Vortec 07 Wela 05 Zehnder 00 Zenith 0 CBL (cable receiver) ABC 00, 00, 0 Archer 006 Cabletime 08, 0 Cableview 00 Contec 009 Eastern 00 GE 00, 00 Gemini 0 General Instruments 00, 0 Grundig 0 Hamlin 0 Hitachi 00 Jerrold 00, 0, 0, 0, 0, 0, 06 Magnavox 0 Memorex 05 Movie Time 06 NEC 00 Nokia 0 NSC 06 Oak 009 Panasonic 00 Philips 007, 008, 0 Pioneer 07, 0 Proscan 00, 00 RCA 00, 00, 0 Realistic 006 Sagem 0 Salora 09 Samsung 07 Signature 00 Sprucer 00 Standard Component 08 Starcom 0, 0 Stargate 0 Tele 00 Tocom 0 United Cable 0, 0 Universal 005, 006 Videoway 05 View Star 009, 0, 06 Zenith 09 VCR Aiwa 0, 06, 07 Akai 00, 00, 0 Alba 0, 0, 0, 05, 07 Anitech 0 ASA 0 Baird 06 Bell & Howell 007 Blaupunkt 09, 0 Bush 0, 0, 0, 05, 07 Canon 00, 0 Carver 0 Cimline 0 Citizen 008, 009 Colortyme 005 Craig 008 Crown 0 Curtis Mathes 00, 005, 008, 009, 00, 0, 0, 06 Cyrus 0 Daewoo 0 Dansai 0 Decca 0 Dimensia 00, 06 Dumont 0, 06, 07 Elcatech 0 Emerson 00, 00, 0, 0 ESC 0 Ferguson 05 Finlandia 0, 06 Finlux 0, 06, 07 Firstline 0, 0 Fisher 007, 00, 06 Fuji 00, 00, 0 Funai 0 Garrard 0 GE 00, 00, 008, 00, 0, 0, 05, 06 GEC 0 GoldHand 0 GoldStar 005, 009 Goodmans 0, 0 Gradiente 0 Graetz 06, 0 Granada 00, 0, 06 Grandin 0 Grundig 09, 0, 0, 09, 00, 0, 0 Harman Kardon 005 HCM 0, 0 Hinari 08, 0, 0, 0, 07 Hitachi 0, 0, 05, 08, 07, 08, 0 Ingersol 08 Interfunk 0 ITT 00, 06, 0, 08 JC Penney 005, 006, 007, 008, 00, 0, 0, 0, 0 VCR Jensen 0 JVC 005, 006, 007, 009, 0, 05, 00, 08 Kaisui 0 Kendo 0, 06 Kenwood 005, 006, 007, 009 Kodak 00 Loewe 08, 0 Logik 08, 0 Luxor 00, 0, 06 Magnavox 00, 0, 0, 09, 00 Marantz 005, 006, 007, 009, 00, 0, 0, 0 Matsui 08, 0, 06, 07 Matsushita 00 Memorex 007, 008, 00, 0, 09, 00, 06 Metz 09 MGA 0 Minerva 09 Minolta 0, 0 Mitsubishi 0, 0, 0, 0 Motorola 00 MTC 008 Multitech 008, 0, 0 NEC 005, 006, 007, 009, 0 Neckermann 0 Nesco 0 NOBLEX 008 Nokia 00, 06, 0 Nordmende 08 Okano 06 Olympus 00 Optonica 07 Orion 08, 0, 05, 06, 07 Osaki 0 Otto Versand 0 Palladium 0 Panasonic 00, 0, 0 Pentax 0, 0, 05, 07 Pentex Research 009 Philco 00, 0, 0 Philips 00, 0, 07, 0, 08 Phonola 0 Pioneer 006, 0, 0, 0 Proline 0 Proscan 00, 00, 06 Pye 0 Quasar 00, 0 Quelle 0 Radio Shack 07 Radio Shack/ Realistic Radiola 0 007, 008, 00, 0, 0, 07

9 Using the Remote Controller with Other Components Continued VCR Manufacturer RCA Control code 00, 00, 00, 008, 00, 0, 0, 0, 05, 06, 07 Realistic 007, 008, 00, 0, 0, 07 Rex 08 Roadstar 0, 0 Runco 09 Saba 00, 08 Saisho 08, 0 Salora 00 Samsung 008, 0, 09 Sansui 006, 0 Sanyo 007, 008, 00, 06 Saville 07 SBR 0 Schaub Lorenz 06 Schneider 0, 0 Scott 05 Sears 007, 00, 0, 0 SEG 0 SEI 08, 0 Sharp 06, 07, 0 Shintom 00, 0, 06 Shorai 08 Siemens 0, 06, 09 Singer 00 Sinudyne 08, 0 Sonolor 00, 0 Sony 00, 08, 0 STS 00, 0 Sunkai 06 Sylvania 00, 0, 0, 0 Symphonic 0 Tandy 007 Tatung 0 Teac 0 Technics 00, 0 Teknika 00, 0 Telefunken 08 Thomson 08 Thorn 05, 06 Toshiba 0, 05, 0, 0, 08 Totevision 008 Uher 0 Unitech 008 Universum 0, 09, 0 Vector Research 005, 006 Video Concepts 005, 006, 0 Wards 008, 00, 0, 0, 07, 0, 07 XR000 00, 0 Yamaha 005, 006, 007, 009 Yoko 0 Zenith 00, 09, 0 Admiral 06, 00, 06 Akai 00, 067 Akura 05 Alba 05, 0 Amplivision 06 Amstrad 05, 067 Amtron 009 Anam National 00, 009 Anitech 05 AOC 00, 005, 006 Arc en Ciel 066 Arcam 06 ASA 00 Audiovox 009 Autovox 00, 068 Baird 069 Bang & Olufsen 00 Baur 06, 05, 055, 058, 059, 068 Beko 05 Bell & Howell 00, 07 Binatone 06 Blaupunkt 0, 0, 0, 058, 059 Boots 06 Brionvega 00 Bruns 00 BSR 08 Bush 05, 0, 08, 050, 05, 057 Cascade 05 Celebrity 00 Century 00 Cimline 05, 0 Citizen 00, 006, 009, 07, 0, 05 Clatronic 05 Colortyme 00, 006 Condor 05 Contec 05 Contec/Cony 007, 009 Continental Edison 066 Craig 009 Crosley 00 Crown 009, 0, 05, 05 Curtis Mathes 00, 00, 006, 00, 07, 0, 05, 0 Daewoo 00, 005, 006, 05, 05, 05 Daytron 00, 006, 05, 05 Decca 067 Dimensia 00, 0 Dixi 05 Dual 057, 068 Dumont 00, 09, 00 Electroband 00 Electrohome 00, 00, 00, 006, 008 Elta 05 Manufacturer 00, 006, 007, 009, Emerson 00, 07, 05, 07, 09, 0, 00, 070 Envision 00, 006 Erres 07 Europhon 067 Fidelity 068 Finlux 09, 00, 067 Firstline Control code 05, 0, 08, 09, 06 Fisher 00, 07, 05, 06, 068 Formenti 00 Frontech 05, 06 Fujitsu 070 Funai 009, 05, 08, 070 GE 00, 00, 00, 006, 0, 0, 09, 0 GEC 08, 06, 067, 069 Geloso 05 Genexxa 06 GoldStar 00, 005, 006, 007, 008, 05, 07, 06 Goodmans 0, 05, 06 Gorenje 05 Graetz 06, 069 Granada 06, 067 Grundig 09, 0, 0, 058, 059, 06 Hallmark 00, 006 Hanseatic 060, 068 Hantarex 067 HCM 05 Hinari 05, 0 00, 006, 007, 0, Hitachi 07, 08, 06, 06, 069 Huanyu 05 ICE 05, 06 Imperial 05 Infinity 0 Inno Hit 056, 067 Interfunk 055, 06, 066, 069 Intervision 05, 06 ITT 06, 068, 069 JBL 0 00, 00, 005, 006, JC Penney 0, 0, 06, 09, 0, 05, 0 Jensen 00, 006 JVC 007, 0, 0, 05, 0 Kaisui 05, 06 Kapsch 06, 069 Kathrein 060 Kawasho 00, 00, 006 Kendo 0 Kenwood 00, 006, 008 Kloss Novabeam 009 Korting 00 K 009, 05 LG 005

10 Using the Remote Controller with Other Components Continued Manufacturer Control code Loewe 0, 00, 055 Luxman 00, 006 LXI 00, 006, 00, 0, 06, 07, 0 M Electronic 05, 05, 06, 06 Magnadyne 00, 067, 068 Magnafon 067 Magnavox 00, 006, 008, 0, 08, 00 Marantz 00, 006, 0, 060 Matsui 05, 0, 08, 050, 06, 06, 067, 068 Megatron 006 Memorex 005, 006, 00, 07, 05 Metz 00, 05, 058 MGA 00, 005, 006, 008 Minerva 09, 058, 059, 06 Mitsubishi 00, 005, 006, 008, 00, 055, 058 Mivar 07, 056, 067 Motorola 00, 06 MTC 00, 005, 006, 0, 055 Multitech 009, 05 NAD 006, 06 NEC 00, 00, 005, 006 Neckermann 00, 0, 05, 059, 060 Nikkai 05 Nikko 006 Oceanic 06 Onwa 009 Optonica 0, 06 Orion 09, 0, 08, 09, 050, 067, 068 Osaki 05, 06 06, 0, 0, 05, Otto Versand 055, 058, 059, 060, 06 Palladium 05 00, 0, 0, 0, Panasonic 0, 06, 05, 06, 06, 069 Pathe Marconi 066 Philco 00, 00, 005, 006, 007, 008, 0, 08, 00 00, 00, 007, 008, 0, 08, 09, 00, Philips 07, 08, 00, 05, 059, 060 Phoenix 00 Phonola 07, 00 Pioneer 00, 006, 07, 06 Portland 00, 005, 006, 05 Price Club 0 Prism 0 Profex 05 Proline 09 Proscan 00, 0 Protech 05, 05, 06 Proton 00, 006, 007 Pye 07 Quasar 00, 0, 0 Quelle 06, 09, 05, 055, 058, 059, 068 Radio Shack 00, 07, 0 Radio Shack/ Realistic 00, 00, 006, 007, 009, 00, 07, 0, 05 Radiola 07 Radiomarelli 00, 067 RCA 00, 00, 00, 005, 006, 008, 07, 0 Realistic 00, 07, 0 Rex 05, 06 RFT 00 Roadstar 05, 05 Saba 00, 06, 066, 069 Saisho 05, 0, 05, 067, 068 Salora 06 Sambers 056, 067 Sampo 00, 006, 05 00, 005, 006, 007, Samsung 008, 0, 05, 05, 05, 07, 05, 056, 060, 06, 065 Sansui 09 Sanyo 00, 00, 07 SBR 07, 08 Schaub Lorenz 069 Schneider 068 Scott 00, 006, 007, 009, , 00, 006, 008, Sears 00, 05, 06, 07, 08, 0, 070 SEG 05, 06 SEI 06, 00, 08, 067, 068 Seleco 06 Sharp 00, 006, 007, 0, 0, 05, 06 Shorai 08 Siarem 00, 067 Siemens 0, 0, 058, 059 Singer 00 Sinudyne 06, 00, 0, 067, 068 Solavox 06 Sonoko 05 Sonolor 06 Sony 00, 00, 0, 06, 05 Soundesign 00, 006, 009, 070 Starlite 009 Stern 06 Sunkai 0, 08, 09, 050 Sylvania 00, 006, 008, 0, 08, 00 Symphonic 009, 08 Tandy 06, 06, 06 Tashiko 08, 06 Tatung 00, 06, 067 Tec 06 Technics 0, 0, 06 Techwood 00, 006, 0 00, 005, 006, 007, Teknika 009, 0, 05, 0, 070 Teleavia 066 Telecaption 0 Telefunken 066 Teletech 05 Teleton 06 Tensai 08 Thomson 066 Thorn 05, 055, 058 Toshiba 00, 06, 07, 0, 0, 09 Totevision 05 Triumph 067 Universal 0, 09 Universum 05, 05, 058 Voxson 00, 06 Waltham 06 00, 00, 005, 006, Wards 008, 0, 0, 08, 09, 00, 0, 0, 070 Watt Radio 068 Wega 00 Yamaha 00, 005, 006, 008 Yoko 05, 06 Zenith 00

11 Using the Remote Controller with Other Components Continued Controlling a Satellite Tuner Controlling a VCR ON, STANDBY Number buttons ON STANDBY ' / ABC DEF 5 6 GHI JKL MNO PQRS TUV WXYZ ON, STANDBY ON STANDBY ' / ABC DEF 5 6 GHI JKL MNO PQRS TUV WXYZ 0 0 CLEAR # / DIRECT TUNING 0 0 CLEAR # / DIRECT TUNING MACRO ZONE ZONE Scroll wheel MACRO ZONE ZONE Scroll wheel DIMMER SLEEP DIMMER SLEEP ENTER /DISC / / / / T V PREV DISC DISPLAY TOP MENU SERVER EXIT RETURN ENTER MENU AUDIO ADJ GUIDE SETUP / /DISC / T V PREV DISC DISPLAY TOP MENU SERVER EXIT RETURN ENTER MENU AUDIO ADJ GUIDE SETUP / REC MAIN A MAIN B RANDOM REC REC MAIN A MAIN B RANDOM AUDIO SUBTITLE ANGLE LAST M AUDIO SUBTITLE ANGLE LAST M SURR THX ALL ST STEREO SURR THX ALL ST STEREO REPEAT AB SEAR MEMORY PURE A DIRECT DSP DSP REPEAT VIDEO MUSIC PHOTO TEST TONE SEL LEVEL LEVEL PLAYLIST ALBUM AR TIST GENRE AUDIO SEL L NIGHT ReEQ CAPS DELETE LANGUAGE LOCATION REPEAT AB SEAR MEMORY PURE A DIRECT DSP DSP REPEAT VIDEO MUSIC PHOTO TEST TONE SEL LEVEL LEVEL PLAYLIST ALBUM AR TIST GENRE AUDIO SEL L NIGHT ReEQ CAPS DELETE LANGUAGE LOCATION. the input source and the remote controller mode for your satellite tuner. Perform this operation while both the [] and [] buttons are not illuminated. If you want to operate only the satellite tuner without changing the input source, press the [] button and roll the scroll wheel to select SAT.. Point the remote controller at your satellite tuner, and use the following buttons (you must enter appropriate remote control code first). ON, STANDBY Set the satellite tuner to On or Standby /DISC / Select satellite channels / / / Select menu items ENTER Confirm selection Number buttons Enter numbers The following buttons control the TXNR000/ TXNR5000E. RC557M RC558M Adjust the TXNR000/TXNR5000E volume Mute the TXNR000/TXNR5000E. the input source and the remote controller mode for your VCR. Perform this operation while both the [] and [] buttons are not illuminated. If you want to operate only the VCR without changing the input source, press the [] button and roll the scroll wheel to select VCR.. Point the remote controller at your VCR, and use the following buttons (you must enter appropriate remote control code first). ON, STANDBY /DISC / Set the VCR to On or Standby Select channels Play Stop Rewind Fast forward Pause REC Record The following buttons control the TXNR000/TXNR5000E. RC557M RC558M Adjust the TXNR000/TXNR5000E volume Mute the TXNR000/TXNR5000E

12 Using the Remote Controller with Other Components Continued Controlling a Controlling a Cable Receiver ON, STANDBY Number buttons ON STANDBY ' / ABC DEF 5 6 GHI JKL MNO PQRS TUV WXYZ 0 0 CLEAR # / DIRECT TUNING * / * / * ON, STANDBY Number buttons ON STANDBY ' / ABC DEF 5 6 GHI JKL MNO PQRS TUV WXYZ 0 0 CLEAR # / DIRECT TUNING MACRO ZONE ZONE Scroll wheel MACRO ZONE ZONE Scroll wheel /DISC / / / / DIMMER T V PREV DISC DISPLAY TOP MENU SERVER EXIT RETURN ENTER MENU AUDIO ADJ GUIDE SETUP SLEEP / /DISC / DIMMER T V PREV DISC DISPLAY TOP MENU SERVER EXIT RETURN ENTER MENU AUDIO ADJ GUIDE SETUP SLEEP / REC MAIN A MAIN B RANDOM REC MAIN A MAIN B RANDOM AUDIO SUBTITLE ANGLE LAST M AUDIO SUBTITLE ANGLE LAST M SURR THX ALL ST STEREO SURR THX ALL ST STEREO REPEAT AB SEAR MEMORY REPEAT AB SEAR MEMORY PURE A DIRECT DSP DSP REPEAT VIDEO MUSIC PHOTO TEST TONE SEL LEVEL LEVEL PLAYLIST ALBUM AR TIST GENRE PURE A DIRECT DSP DSP REPEAT VIDEO MUSIC PHOTO TEST TONE SEL LEVEL LEVEL PLAYLIST ALBUM AR TIST GENRE AUDIO SEL L NIGHT ReEQ AUDIO SEL L NIGHT ReEQ CAPS DELETE LANGUAGE LOCATION CAPS DELETE LANGUAGE LOCATION. the input source and the remote controller mode for your. Perform this operation while both the [] and [] buttons are not illuminated. If you want to operate only the without changing the input source, press the [] button and roll the scroll wheel to select.. Point the remote controller at your, and use the following buttons (you must enter appropriate remote control code first). ON, STANDBY / Number buttons /DISC / Set the to On or Standby on/off Select channels Enter numbers Select cable channels Select or VCR input Adjust the volume *Buttons marked with an asterisk can always be used to control a regardless of the currently selected remote controller These buttons do not work with the additional modes. The following buttons control the TXNR000/TXNR5000E. RC557M RC558M Adjust the TXNR000/TXNR5000E volume Mute the TXNR000/TXNR5000E. the input source and the remote controller mode for your cable receiver. Perform this operation while both the [] and [] buttons are not illuminated. If you want to operate only the cable receiver without changing the input source, press the [] button and roll the scroll wheel to select CBL.. Point the remote controller at your cable receiver, and use the following buttons (you must enter appropriate remote control code first). ON, STANDBY /DISC / Number buttons Set the cable receiver to On or Standby Select cable channels Enter numbers The following buttons control the TXNR000/ TXNR5000E. RC557M RC558M Adjust the TXNR000/TXNR5000E volume Mute the TXNR000/TXNR5000E 5

13 Using the Remote Controller with Other Components Continued Learning Commands from Another Remote Controller You can teach the TXNR000/TXNR5000E s remote controller new commands simply by transmitting commands from another remote controller one at a time. For example, by transmitting the Play and Stop commands from your CD player s remote controller, the TXNR000/TXNR5000E s remote controller can be taught to transmit those commands when its Play [ ] and Stop [ ] buttons are pressed in CD This is convenient when you want to add commands to buttons after entering a remote control code (See page 9). Press and hold the [] button for more than three seconds. LEARN, and then press the scroll the the remote controller mode you want to teach a new command, and then press the scroll On the TXNR000/TXNR5000E s remote controller, press the button you want to teach the new command. If you press a button that cannot be taught a new command, the message RETRY appears and you should press another button. 5 Point the remote controllers at each other, about to 6 inches (5 5 cm) apart, and then, on the other remote controller, press the button whose command you want to learn. When the command has been learned successfully, OK appears on the display. You may need to press the button several times. If the command is not learned successfully, after the message FAIL has been displayed, the mode select display reappears (step ), and you should try again. 6 To teach the TXNR000/ TXNR5000E s remote controller more new commands, repeat steps through 5. Press the [] button when you ve finished. Notes: The following buttons cannot be taught new commands: [LIGHT], [], [MACRO], [], [], [ZONE ], [ZONE ], and the scroll wheel button. The TXNR000/TXNR5000E s remote controller can learn a total of 50 commands. However, the commands of some remote controllers may use a lot of memory, in which case, this total will be reduced. If the message FULL appears, the remote controller cannot learn any more commands because its memory is full. By default, the TXNR000/TXNR5000E s remote controller knows the commands for controlling an Onkyo CD player, cassette deck, DVD player, and MD recorder (e.g., Play, Stop, Pause, etc., buttons). You can teach these buttons new commands, although the defaults will be restored if the remote controller is reset. To teach a new command to a button that has already been taught a command, simply repeat this procedure. Like most remote controllers, the TXNR000/ TXNR5000E s remote controller uses infrared. Commands from remote controllers that don t use infrared cannot be learned. When the remote controller s batteries expire, all learned commands will be lost and will have to be learned all over again, so don t discard your other remote controllers. 6

14 Using the Remote Controller with Other Components Continued Using Macros With the Macro function you can program the remote controller to perform a sequence of actions with one press of a button. For example, normally you need to perform the following actions to use a CD player that s connected to the TXNR000/TXNR5000E:. Press the scroll wheel, (to select AMP mode).. Press the [ON] button (to turn on the TXNR000/TXNR5000E).. CD (to select the CD remote controller mode and the CD input source).. Press the Play [ ] button (to start the CD player). With the Macro function you can program the remote controller to do all of this with one press of a button. Making Macros You can make up to eight macros, and each macro can perform up to eight actions. Press and hold the [] button for more than three seconds. MACRO, and then press the scroll 5 On the remote controller, press the buttons whose actions you want to program into the macro in the order you want them performed. To program the CD example in the left column into a macro: press the scroll wheel, press the [ON] button, roll the scroll wheel to select CD, press the scroll wheel, and then press the Play [ ] button. Actions are numbered from to 8. Macro # selected 8 actions learned After each button is pressed, SET followed by KEY is displayed. To add an action that selects an input source for the main room, Zone, or Zone, press the [], [ZONE ], or [ZONE ] button, respectively, roll the scroll wheel to select the input source, and then press the scroll 6 When you ve finished, press the Macro button. After the following appears on the display, the display returns to MACRO normal. EDIT, and then press the scroll a macro, and then press the scroll Macros are numbered from to 8. Macro # selected Action # 7

15 Using the Remote Controller with Other Components Continued Running Macros Programmed macros can be run as follows. Press the [MACRO] button. the macro s number, and then press the scroll The actions in the macro are performed in the order in which they were programmed. Naming Macros You can name your macros as follows. Names may contain of up to five characters. Press and hold the [] button for more than three seconds. 5 a character, and then press the scroll wheel to set it. The following characters are available A B C D E F G H I J K L M N O P Q R S T U V W X Y Z = < > _ / \ * space Macro # selected st character set 6 Repeat step 5 until you ve entered all 5 characters. The previous menu reappears. If the name you are entering consists of less than five characters, enter spaces at the end to fill all five places. MACRO, and then press the scroll NAME, and then press the scroll the number of the macro that you want to name, and then press the scroll Macro # selected st character 8

16 Other Settings for the Remote Controller Editing Remote Controller Modes Adding New Remote Controller Modes You can add additional modes (DVD,, VCR, CBL, SAT) to the remote controller. This is useful if, for example, you have several DVD players or s. Press and hold the [] button for more than three seconds., and then press the scroll Reordering the Remote Controller Modes You can change the order in which the remote controller modes appear when you roll the scroll The position of the AMP mode cannot be changed. Press and hold the [] button for more than three seconds., and then press the scroll ADD, and then press the scroll SORT, and then press the scroll the type of mode you want to add, and then press the scroll the mode you want to move, and then press the scroll You can add up to 8 additional modes: for example, DVD,, VCR, and CBL. 5 the mode before which you want to insert the specified mode, and then press the scroll Here the specified mode will be inserted before the VCR If the move is successful, after OK has been displayed, the SORT display (step ) reappears. 9

17 Other Settings for the Remote Controller Continued Deleting Remote Controller Modes You can delete remote controller modes that you don t need, such as modes for components that you don t have. The AMP mode cannot be deleted. Press and hold the [] button for more than three seconds., and then press the scroll Assigning Remote Controller Modes You can change the combination in selecting the input source and remote controller mode simultaneously using the scroll For example, when the input source (top) is TAPE and the remote controller mode (bottom) is AMP, you can change only AMP (the remote controller mode) to CDR. Press and hold the [] button for more than three seconds., and then press the scroll DEL, and then press the scroll ASSGN, and then press the scroll the mode you want to delete, and then press the scroll an input source, and then press the scroll If the mode is deleted successfully, after OK has been displayed, the DEL display (step ) reappears. 5 the mode you want to assign to the specified input source, and then press the scroll If the assignment is successful, after OK has been displayed, the ASSGN display (step ) reappears. 0

18 Other Settings for the Remote Controller Continued Resetting the Remote Controller You can reset the remote controller to its default settings. Press and hold the [] button for more than three seconds. Press and hold the [] button for more than three seconds. SETUP, and then press the scroll SETUP, and then press the scroll IR/ RF, and then press the scroll RESET, and then press the scroll YES, and then press the scroll The remote controller is reset to its default settings. Using the Remote Controller with Radio Frequency (RC558M only) You can set the remote controller s transmission signal format to either infrared (IR) or radio frequency (RF). The default setting is IR. This is useful when, for example, the TXNR000/ TXNR5000E is installed in a rack or is not in line of sight of the remote controller as it allows you to use a commercially available RF receiver to pick up commands from the remote controller, which are then fed to the TXNR000/TXNR5000E via its IR IN socket. For this to work, you must assign the same ID and channel to the remote controller and RF receiver. IR or RF, and then press the scroll When you select IR. 5 If you select RF, roll the scroll wheel to select the same ID as the RF receiver, and then press the scroll IDs 0 to 9 and A to F can be selected. 6 the same channel as the RF receiver, and then press the scroll Channels 0 to can be selected. If the ID and channel have been set successfully, OK appears on the display.

19 Other Settings for the Remote Controller Continued Changing the Remote Controller s Control ID This section explains how to change the remote controller s ID. You may need to change this if the TXNR000/TXNR5000E s remote controller interferes with other Onkyo components located in the same room. Note: If you change the remote controller s ID, be sure to select the same ID on the TXNR000/TXNR5000E. For details on setting up the TXNR000/ TXNR5000E s remote control ID, refer to the Remote Control Setup Submenu section on page 87. The default ID for both the TXNR000/TXNR5000E and remote controller is. Hold down the remote controller s [CUS TOM] button for more than three seconds. SETUP menu, and then press the scroll ID menu, and then press the scroll an ID (default),, or and then press the scroll Select the same ID as that set on the TXNR000/TXNR5000E.