VIDEO INTERCOM SYSTEM LINE-UP CATALOGUE

Transcription

1 VIDEO INTERCOM SYSTEM LINEUP CATALOGUE Trademarks and registered trademarks MIFARE is a trademark of NXP B.V. iphone and ipad are trademarks of Apple Inc., registered in the U.S. and other countries. Android is a trademark of Google Inc. SD, SDHC and SDXC Logos are trademarks of SDC, LLC. The software of the sub monitor is based in part on the work of the Independent JPEG Group. All other trademarks identified herein are the property of their respective owners. Important Safety Precaution: Carefully read the operating instructions and installation manual before using this product. Panasonic cannnot be responsible for the performance of the network and/or other manufacturers' products used on the network. DISTRIBUTED BY : MGDHPC01EN 110ITP/ZZZBX1

2 System Configuration Eample VIEW AND TALK FLEXIBLY System s Wireless Video Intercom System Main VLSWD501 VLMWD501 Bedroom 1 Panasonic offers various Video Intercom System models to fleibly suit the size of your house and your lifestyle. VLV55 Wire! Kitchen VLWD1 Living Wireless Den Garage VLPS1 DECT Repeater VLFKD Wireless Sensor Camera VLWD81 Wireless Video Intercom System * A total of up to sub monitors and etension monitors can be registered to the main monitor. VLSWD7 System s Main/Etension VLMWD7 * Bedroom 1 Wireless VLWD1 * (not including the main monitor ) VLV5L Living Den 5 DECT Repeater VLFKD Wire! Panasonic Kitchen Stylish Premium DECT Wireless Series Epandable DECT Wireless Series. GHz Wireless Series Smartphone Connect Series wire Series VLSWD501 VLSWD7 VLSW51 VLSVN511 VLSF70 This image shows the KXNS500. System s Wireless Video Intercom System Main VLSW51 VLMW51 Living Kitchen Den Panasonic 1 Main : VLMVN511 1 Main : VLMF70 1 : VLV5L 1 : VLVF580 Maimum Connectable s (phone) Main / Etension Wireless Sub Smartphone, Tablet Recording Video / Picture Recording SD Card Recording Connectable Devices Sensor Camera Electric Lock Release ( Opener) Panasonic Repeater Others Night Vision (LED Light) Touch Panel / Pan & Tilt Wide Angle Camera Intercom Call Voice Changer VLSWD501 VLSWD7 VLSW51 VLSVN511 VLSF70 (DieCast Aluminium) 1/ 1/ 1/ 1/ / (DECT) (DECT) (. GHz) / () ()* / / ()* / () () / ()* () () ()* / / / H: 170 V: 115 H: 87 V: H: 87 V: H: 87 V: H: 51 V: 8 / *1 The main monitor must be on the same home wireless network as a smartphone/tablet (with the dedicated app installed). * When connecting, an optional is required. Please consult your dealer when connecting with a. Router Kitchen VLV5L Den Mobile Devices Panasonic This image shows the KXNS500. VLRLY1 VLPS1 () 1 Wire! Bedroom VLMVN511 Living Main VLSVN511 / System s 1 VLFAN1/VLFAN* This image shows the KXNS500. Video Intercom System Comparison Chart Model Number Repeater for Wireless * for India Wire! 1 Main : VLMW51 1 : VLV5L 1 Wireless Sub : VLW05 VLW05 1 VLV5L 1 Main : VLMWD7 1 : VLV5L 1 Wireless Sub : VLWD1 Wireless Bedroom 1 Main : VLMWD501 1 : VLV55 1 Wireless Sub : VLWD1 Please consult your dealer when connecting with a. Please consult your dealer when connecting with a. System s Video Intercom System VLSF70 VLMF70 Bedroom 1 Living VLVF580 Kitchen Wire! Switch Bo

3 Stylish Premium DECT Wireless Series Epandable DECT Wireless Series Video Intercom System VLSVD7 (Wireless monitor sold separately) Wireless Video Intercom System VLSWD501 Wireless Video Intercom System VLSWD7 VLV5L Wire *1 Main VLMWD7 5inch Wide Screen 7inch Wide Screen * * (not including the main monitor) Wire * > < Wire *1 > VLV55 Main VLMWD501 Wireless VLWD1 VLV5L Main VLMWD7 Wireless VLWD1 * Easy installation by simply replacing eisting doorbell unit Nonpolar wire system. *1 Easy installation by simply replacing eisting doorbell unit Nonpolar wire system. * A total of up to sub monitors and etension monitors can be registered to the main monitor. DECT Wireless Touch Panel Highly Epandable Wireless Handset (DECT) The wireless design means that there is no troublesome wiring required when adding on to the system as well. You can add on up to sub monitors and DECT Wireless Sensor Cameras for large homes, and easily confirm visitors from a monitor in each room. The main monitor has a 5inch wide screen that clearly shows each visitor's face. If it is difficult to see, simply touch the screen to activate an approimate zoom horizontally and vertically. This makes it easy for everyone to see, and provides an easytouse operating screen. additional monitors can be connected to the main monitor using a combination of 7inch wired monitors and.inch wireless monitors (However, the maimum possible number of 7inch wired monitors is ). In addition, connectivity is also supported. Total You can use the wireless monitor to check visitors and respond promptly from the living room, kitchen and elsewhere in the home even while you are doing something else. wireless monitors can be connected, and the ma wireless range is 100 m with no obstacles. You can also add up to DECT repeaters to epand the range. SD Card Recording You can automatically record video images of visitors while you're away from home. It will record up to,000 visitors (0 seconds per visitor). And you can save and play the images on a PC that has an SD card slot. Electric Lock Release Support : AC1 V1 A / DC1 V1 A WideAngle Camera (Horizontally:170, Vertically:115 ) Wireless Sensor Cameras Connectable Night Vision (warm white coloured LED lights) Voice Changer Intercom Call (between main monitor and sub monitor) 7inch Screen The main monitor and etension monitor have a 7inch wide screen that offers easy viewing of wide vertical and horizontal views. Electric Lock Release Support : AC0 V1 A / DC V1 A Picture Recording ( 50 visitors (up to 8 still images per visitor)) Night Vision (white coloured LED lights) Voice Changer Intercom Call (between the main monitor, sub monitor and etension monitor) Options Related Product Options (phone) VLV55 (Surface mount) VLV55U (Flash mount) CMOS 1.0 M piels Flush Mounting Bo VLMB55 Wireless (Sub ) VLWD1 Wireless Sensor Camera VLWD81 DECT Repeater VLFKD VLV590 0 main monitors can be connected. Main (Main ) VLMWD501 (phone) VLV5L (Surface mount) (phone) VLV55 (CMOS 1.0 M piels) VLV555 (CMOS 0. M piels) Etension VLMWD7 Wireless (Sub ) VLWD1 DECT Repeater VLFKD VLV590 0 main monitors can be connected. Connectable Model Numbers KXTDA0/100/100D/00/00 series KXTDE100/00/00 series KXNS00/500/700/1000 series Please consult your dealer This image shows the KXNS500. when connecting with a. 5

4 . GHz Wireless Series Smartphone Connect Series Wireless Video Intercom System VLSW51 5inch Wide Screen Video Intercom System VLSVN511 5inch Wide Screen Wire * Wire * Main Wireless Main VLV5L VLMW51 VLW05 VLV5L VLMVN511 * Easy installation by simply replacing eisting doorbell unit Nonpolar wire system. * Easy installation by simply replacing eisting doorbell unit Nonpolar wire system. Wireless Handset (. GHz) Night Vision (LED Light) Smartphone Connect *1 Notification * Check visitors and respond promptly from everywhere in the home and even while you are doing something else, by wireless handset. is equipped with LED lights (illumination lamp). It enables the colour display of visitors at a distance of about 50 cm at night. You can use your smartphone or tablet as a sub monitor to respond to visitors and unlock electric locks no matter where you are in the home. You can also monitor doorphone images when you want to check the door entrance. The main monitor can send with a time stamp and image of visitors to addresses registered in advance, enabling you to check who has visited when you are outside the house (even when you are overseas). Picture Recording (8 Consecutive recorded images each) Eight consecutive still images of visitors are automatically recorded. ( 50 times, 00 images in total) This ensures that you will see every person visiting your home. Images can also be displayed framebyframe. Equipped with LED light Electric Lock Release Support : AC0 V1 A / DC V1 A ( Opener) Voice Changer Intercom Call (between main monitor and sub monitor) Answer Visitors and Unlock the Electric Locks Wireless Network Connection In addition to smartphones/tablets, the main monitor can also wirelessly connect to the wireless router for easy connections without a cable. ing VLMVN511 Wireless network Router Mobile devices Modem Supports ios and Android TM (free application)* iphone 5 and later, ipad (ios 7.0 or later) Android smartphones and tablets (Android.0 or later) Electric Lock Release Support: VLRLY1 (1 V, less than 1 A) Picture Recording ( 50 visitors (up to 8 still images per visitor)) Night Vision (white coloured LED lights) Voice Changer * Some mobile devices may not be compatible. * For the latest information about the app and compatible devices, visit the following website. Options Options (phone) VLV5L Wireless (Sub ) VLW05 VLV590 Repeater for Wireless VLFAN1/VLFAN* Connectable Model Numbers KXTDA0/100/100D/00/00 series KXTDE100/00/00 series KXNS00/500/700/1000 series (phone) VLV555 (Surface mount) CMOS 0. M piels (phone) VLV55 (Surface mount) CMOS 1.0 M piels (phone) VLV5L (Surface mount) VLV590 Connectable Model Numbers KXTDA0/100/100D/00/00 series KXTDE100/00/00 series KXNS00/500/700/1000 series 0 main monitors can be connected. * for India This image shows the KXNS500. Please consult your dealer when connecting with a. 0 main monitors can be connected. This image shows the KXNS500. Please consult your dealer when connecting with a. *1 The main monitor must be on the same home wireless network as a smartphone/tablet (with the dedicated app installed). It is also necessary to run the dedicated app in order to receive visitor's calls on a smartphone/tablet. * To use this function, a main monitor with sender information registered must be connected to the internet. may not be able to be sent, depending on the condition of the network. 7

5 wire Series MultiEntrance System Video Intercom System VLSF70 7inch Wide Screen 1 by Entrance System VLVF50 Wire VLVF580 VLMF70 Stylish for Multifamily Housing or Office, Commercial Facilities 7inch Wide Three Connectable groups/1 monitors can be connected to VLVF50 and a separate group can be set for each of the call buttons. This enables visitors to call the household they are visiting without disturbing other households. The household can respond by checking the visitor's face and unlocking the lobby door. This monitor features a 7inch wide LCD. As the monitor, it lets you clearly identify visitors. Picture Recording 50 visitor images are automatically recorded and saved. You can check them when you return home. A maimum of three monitor units can be connected. By installing them in the living room and other rooms where you spend the most time, such as a bedroom or kitchen, you can answer the visitor immediately. * 1 * 1 *1 (user supplied) * Switch bo included with the optional VLVF580 Switch bo* Electric Lock Release Support ( Opener) : DC1 V1.5 A Stylish and Tough The robust body meets the dustproof and waterproof requirements of IP5 * 1 and a hairline aluminium panel makes your entranceway more stylish. Two Types of Mounting The system can be both attached to a wall or embedded in a wall. Both types of mounting fitures are included. System Configuration Eample VLVF50 * Switch bo* VLMF70 VLVF580 * * * * Intercom Call (between monitors) * Multiple monitors required * * Flush Mounting bo Wall Surface mounting base Wall Options (phone) VLVF580 Included switch bo VLMF70 Supported Models (phone) VLVF580 Included switch bo VLMF70 1 groups/1 monitors can be connected name plates Electric Lock Release Support (can be installed in front of each individual home in addition to the lobby) Night vision with LED lights and illumination sensor CMOS camera (Horizontally: Appro. 51 Vertically: Appro. 8 ) * *1 Water resistance is only assured if the doorphone is installed correctly according to the instructions in the Operating Instructions, and appropriate water protection measures are taken. * (user supplied) * Switch bo (included with the optional VLVF580, NOT included with the VLMF70) 8 9

6 VLSWD501 Model Composition VLSWD501 VLMWD501 1 VLV55 1 VLWD1 1 VLSWD7 Model Composition VLSWD7 VLMWD7 1 VLV5L 1 VLWD1 1 VLSWD501U VLMWD501 1 VLV55U 1 VLWD1 1 VLMWD501 Main (Main monitor) VLV55 (Surface mount) VLV55U (Flash mount) (phone) VLWD1 Wireless (Sub monitor) Main body Charger Main (Main monitor) Etension *1 VLMWD7 (not including the main monitor) * VLV5L (phone) 11 VLWD1 Wireless (Sub monitor) Main body Charger source consumption (H W D) (Ecluding protruding sections) language Frequency range Transmitting range Option output (A contact) Image sensor / camera (piel) Eternal material Options source consumption (H W D) supply unit (VLPS1) V DC, 0.5 A (VLPS1 supplied) Standby: Appro. 1. W During operation: Appro. 10 W mm 70 g Ambient temperature: Appro. 0 C to +0 C 5inch wide colour / WVGA (80080 piels) English Handsfree Rated load: V, 0. A or lower Minimum applicable load: 5 V DC, A (Output when there is a call from the doorphone) supplied by the main monitor 0 V DC, 0. A VLV55: 05 g, VLV55U: 5 g Ambient temperature: Appro. 15 C to +55 C (tested up to 0 C) Rechargeable NiMH (AAA ) mm 10 g (including the batteries) Ambient temperature: Appro. 0 C to +0 C AC adaptor (PNLV/PNLVE) Input: 00 V AC, 0.1 A, 50/0 Hz Output: 5.5 V DC, 0.5 A *1 Water resistance is only assured if the doorphone/the camera is installed correctly according to the instructions in the Installation Guide, and appropriate water protection measures are taken. Do not install the camera in areas directly eposed to water or rain. * The minimum illuminance required when the camera s [Brightness] setting is set to [+]. * Appro. 8.5 l when m in front of the camera, and appro. l when m away and 0 to the left or right of the camera. VLV55: mm VLV55U: mm (ecluding sections embedded into the wall) Handsfree.inch colour / QVGA (00 piels) Horizontally: Appro. 170 Vertically: Appro. 115 CMOS sensor (Appro. 1.0 M piels) 1 l (within appro. 50 cm from the camera lens) Warm white coloured LED lights IP5* 1 / Compliant with IK07 VLV55: surface mount (mounting base supplied) Wall mount (mounting bracket supplied) VLV55U: flush mount (flush mounting bo supplied) Flame retardant ABS and PS resin Aluminium and flame retardant PC+PS resin ABS resin 10 VLWD81 (For VLSWD501) Wireless Sensor Camera (VLPS1) supply unit (VLPS1) V DC, 0. A During standby: Appro. 1.5 W During operation: Appro..5 W (when the LED lights are not lit), Appro. 8 W (when the LED lights are lit) mm (when the camera is front facing and including the wall mount bracket) 90 g Ambient temperature: Appro. 0 C to +50 C Frequency range Transmitting range Appro. 100 m (lineofsight distance from the main monitor) Angular field of view (camera angle) Horizontal: Appro. 5 Vertical: Appro. 1 Image sensor 0. M piels CMOS 1 l* white coloured LED lights* Sensor detection range Heat sensor (when the surrounding temperature is appro. 0 C) Horizontal: Appro., vertical: Appro. 0, detection range: Appro. 5 m Motion detection sensor Horizontal: Appro. 5, vertical: Appro. 1 Sensor detection method Pyroelectric infrared sensor (heat sensor) and motion detection Adjustable mounting angles Horizontal: ±90, vertical: facing forward facing down appro. 0 (adjustable when mounting) Heat sensor adjustable angles Manually adjustable to angles IP rating IP5* 1 Wall mount (wall mount bracket supplied) Eternal material PC+ABS resin Input: 00 V AC, 0. A (50/0 Hz) Output: V DC, 0. A mm 15 g Ambient temperature: Appro. 0 C to +50 C (indoor use only) Wall mount or attach to DIN rail Flame retardant PC+ABS resin Depends on main monitor Handsfree Appro. 100 m (lineofsight distance from the main monitor) 10 Standby: Appro. 0. W (when the sub monitor is not placed in the charger) During charging: Appro. 1. W 81 7 mm 70 g (ecluding the AC adaptor) Ambient temperature: Appro. 0 C to +0 C AC adaptor (PQLV19/PQLV19E) Input: 00 V AC, 0.1 A, 50/0 Hz Output:.5 V DC, 0.5 A During standby: Appro. 1.5 W During operation: Appro.. W (when transmitting) 88 g (ecluding the AC adaptor) Appro. 100 m (lineofsight distance from the main monitor) PS resin VLFKD (For VLSWD501 / VLSWD7) DECT Repeater mm Ambient temperature: Appro. 0 C to +0 C ABS resin source consumption (H W D) (Ecluding protruding sections) language Frequency range Transmitting range Image sensor / camera (piel) Eternal material VLSW51 Model Composition VLSW51 VLMW51 1 VLV5L 1 VLW05 1 source consumption (H W D) (Ecluding protruding sections) 00 V AC, 50/0 Hz Standby: Appro..5 W During operation: Appro. 10 W mm 85 g * Ambient temperature: Appro. 0 C to +0 C VLMW51 Main (Main monitor) V AC, 50/0 Hz Standby: Appro. 0.0 A During operation: Appro. 0.8 A mm 785 g * Ambient temperature: Appro. 0 C to +0 C supplied by the main monitor VLV5L (phone) Supplied by the main monitor 5inch wide colour display / WQVGA (807 piels) 1.8inch colour display language English Depends on main monitor Handsfree Handsfree Handsfree Frequency range.0 GHz to.81 GHz.0 GHz to.81 GHz Horizontally: Appro. 87 Vertically: Appro. Image sensor / camera (piel) CMOS sensor (Appro. 0. M piels) 1 l (within appro. 50 cm from the camera lens) Warm white coloured LED lights, Infrared LEDs IPX* Wall mount (mounting bracket supplied) Surface mount (mounting base supplied) Eternal material ABS resin *1 When sub monitors and etension monitors are used together, a total of up to sub monitors and etension monitors can be registered. * Including AC cable. The weight of the AC cable differs depending on the region. * Water resistance is only assured if the doorphone is installed correctly according to the instructions in the Installation Guide, and appropriate water protection measures are taken mm 00 g Ambient temperature: Appro. 15 C to +55 C (tested up to 0 C) mm 00 g.5 11 Ambient temperature: Appro. 15 C to +55 C (tested up to 0 C) Rechargeable NiMH (AAA ) mm 10 g (including the batteries) Ambient temperature: Appro. 0 C to +0 C Main Body 5 NiMH battery (. V DC / 50 mah) mm 175 g (including the battery) Ambient temperature: Appro. 0 C to +0 C VLW05 Wireless (Sub monitor) AC adaptor (PNLV) Input: 00 V AC, 0.1 A, 50/0 Hz Output: 5.5 V DC, 0.5 A Standby: Appro. 0. W (when the sub monitor is not placed in the charger) During charging: Appro. 1. W 81 7 mm 70 g (ecluding the AC adaptor) Ambient temperature: Appro. 0 C to +0 C 7inch wide colour / WVGA (80080 piels).inch colour / QVGA (00 piels) English, Arabic Handsfree Handsfree Depends on main monitor Handsfree Appro. 100 m (lineofsight distance from the main monitor) Horizontally: Appro. 87 Vertically: Appro. CMOS sensor (Appro. 0. M piels) Wall mount (mounting bracket supplied) Flame retardant PC+ABS resin, 1 l (within appro. 50 cm from the camera lens) Warm white coloured LED lights, Infrared LEDs IPX * Surface mount (mounting base supplied) ABS resin ABS resin Charger 7 AC adaptor VLW05BX: PQLV19BX (1000 V AC, 50/0 Hz) VLW05CX: PQLV19E (00 V AC, 50/0 Hz) mm mm (using without the stand) 115 g (including the stand) Ambient temperature: Appro. 0 C to +0 C ABS resin

7 Options source consumption (appro.) (H W D) (Ecluding protruding sections) Frequency range Transmitting range Image sensor / camera (piel) Eternal material VLSF70 Model Composition VLSF70 VLMF70 1 VLVF580 1 source consumption (H W D) (Ecluding protruding sections) Image sensor / camera (piel) Eternal material VLVF50 series source consumption (H W D) (Ecluding protruding sections) Eternal material VLFAN1 / VLFAN* (For VLSW51)* for India Optional Repeater for Wireless main monitors can be connected. AC adaptor (100 0 V AC, 50/0 Hz) 100 V 0 V AC, 50/0 Hz VLFAN1 Standby: 0.05 A During operation: 0.08 A VLFAN Standby: 0.07 A During operation: 0.15 A Standby: 0.0 A During operation: 0.0 A mm mm (when raising the antenna) 85 g Ambient temperature: Appro. 0 C to +0 C.0 GHz to.81 GHz Appro. 100 m (lineofsight distance from the main monitor) Flame retardant PS resin VLMF70 01 *1 Water resistance is only assured if the doorphone is installed correctly according to the instructions in the Operating Instructions, and appropriate water protection measures are taken AC adaptor (PNLV5), V DC, 0.5 A Standby: Appro. 1. W During operation: Appro. 10 W mm 5 g Ambient temperature: Appro. 0 C to +0 C Relative humidity (noncondensing): from 5 % up to 90 % Appro. 7inch wide colour display Handsfree Wall mount (mounting bracket supplied) VLVF50 (phone) *15 / 119 *1 / 15.5 *8 / *Surface mount / Flush mount Supplied by the monitor VLV590 Optional mm (Ecluding sections embedded into the wall).0 kg Ambient temperature: Appro. 10 C to +50 C Horizontally: Appro. 87 Vertically: Appro. Flush mount (flush mounting bo supplied) Stainless steel and flame retardant ABS resin Surface mount: mm mm Flush mount: mm 500 g 5 g Ambient temperature: Appro. 15 C to +55 C (tested up to 0 C) Handsfree Horizontally: Appro. 51 Vertically: Appro. 8 1 l (within appro. 50 cm from the camera lens) White coloured LED lights IP5* 1 / Compliant with IK07 IP* 1 Flush mount or Surface mount (flush mounting bo and surface mounting base supplied) Aluminium / VLVF580 (phone) Surface mount (mounting base supplied) VLV5 Optional (phone) 99 Supplied by the main monitor mm 00 g.5 11 Ambient temperature: Appro. 10 C to +50 C Horizontally: Appro. 87 Vertically: Appro. Horizontally: Appro. 170 Vertically: Appro. 10 CMOS sensor (Appro. 0. M piels) CMOS sensor (Appro. 0. M piels) Surface mount (mounting base supplied) Surface mount (mounting base supplied) * Optional flush mounting bo is sold separately. Aluminium and flame retardant PC+PS resin VLVF580 (phone) Supplied by the monitor mm VLV555 Optional (phone) 5 g Ambient temperature: Appro. 15 C to +55 C (tested up to 0 C) Handsfree Horizontally: Appro. 51 Vertically: Appro. 8 CMOS sensor (Appro. 0. M piels) 1 l (within appro. 50cm from the camera lens) White coloured LED lights IP* 1 Surface mount (mounting base supplied) Optional Accessories Switch Bo 87 *Included with the optional VLVF580 AC adaptor (PNLV5), V DC, 0.5 A Standby: Appro. 0.5 W During operation: Appro. 1.5 W mm 100 g Ambient temperature: Appro. 0 C to +0 C Relative humidity (noncondensing): from 5 % up to 90 % Wall mount Supplied by the main monitor mm 95 g Ambient temperature: Appro. 15 C to +55 C (tested up to 0 C) VLMF70 01 AC adaptor (PNLV5), V DC, 0.5 A Standby: Appro. 1. W During operation: Appro. 10 W mm 5 g Ambient temperature: Appro. 0 C to +0 C Relative humidity (noncondensing): from 5 % up to 90 % Appro. 7inch wide colour display Handsfree Wall mount (mounting bracket supplied) VLSVN511 Model Composition VLSVN511 VLMVN511 1 VLV5L 1 source consumption (H W D) (Ecluding protruding sections) language Wireless transmission method Image sensor / camera (piel) Eternal material *1 Water resistance is only assured if the doorphone is installed correctly according to the instructions in the Operating Instructions, and appropriate water protection measures are taken. Compatibility of Main, Wireless and Please contact your nearest Panasonic dealer for sales information. Main (Package No.) (*1) VLMWD501 (VLSWD501) VLMWD7 (VLSWD7) (add up to etension monitors *7) VLMW51 (VLSW51) VLMVN511 (VLSVN511) VLMF70 (VLSF70) (add up to monitors) VLMV *8 5inch WVGA colour 7inch WVGA colour 5inch WQVGA colour 5inch WQVGA colour 7inch WVGA colour.5inch QVGA colour = Connectable = Connectable (same as packaged combination) = Not connectable Wireless Sub Entrance (. GHz) (DECT) VL55/ (*) (*, *) (*, *, *5) VLW05 VLFAN1/FAN* VLWD1 VLFKD VLV55U VLV555 VLV5L VLV5 VLVF580 VLVF50 VLV590 VLV inch Repeater.inch Repeater 0. M piels 0. M piels 0. M piels 1.0 M piels (*) up to up to up to (*7) up to smartphone connect model wired model wired model up to up to 1.0 M piels 0. M piels 0. M piels 0. M piels (*) (*) (*) *1 is not sold as a single unit. * VLFAN: Repeater for India * Wide/zoom settings and zoom position settings are not available. * phone LED light illumination settings and backlight compensation settings are not available. *5 Outside monitoring using the doorphone is not available. * The image quality may be lower than that of the included in the package, but this is not a malfunction. *7 A total of up to sub monitors and etension monitors can be registered to the main monitor. *8 Connectable to doorbell Comparison of the wiring VLSWD501 *1 VLV55 (Optional ) VLSVN511 VLV5L VLRLY1 VLMVN511 Main (Main monitor) supply unit (VLPS1) V DC, 0.5 A Standby: Appro. 1.8 W During operation: Appro. 10 W mm 85 g Ambient temperature: Appro. 0 C to +0 C 5inch wide colour / WQVGA (807 piels) English, Arabic Handsfree IEEE b/g/n. GHz Wall mount (mounting bracket supplied) Flame retardant ABS and PS resin VLMWD501 VLMVN511 AC cable AC cable VLPS1 VLPS1 Option input (Emergency terminals) VLV5L (phone) Supplied by the main monitor mm 00 g Ambient temperature: Appro. 15 C to +55 C (tested up to 0 C) Handsfree Horizontally: Appro. 87 Vertically: Appro. CMOS sensor (Appro. 0. M piels) 1 l (within appro. 50 cm from the camera lens) Warm white coloured LED lights, Infrared LEDs IPX* 1 Surface mount (mounting base supplied) VLSWD7 VLV5L *1 VLSF VLMWD7 VLVF580 plug (Optional ) Input: 00 V AC, 0. A (50/0 Hz) Output: V DC, 0. A VLPS mm 15 g Ambient temperature: Appro. 0 C to +50 C (indoor use only) Option input (Emergency terminals) Switch Bo * Wall mount or attach to DIN rail Flame retardant PC+ABS resin AC adaptor 5 10 VLSW51 (Optional ) VLMF70 VLV5L AC adaptor VLRLY1 Relay Bo 78 *1 When connecting Elocks, an optional is required. * Switch bo included with the optional VLVF Supplied by the main monitor mm 10 g Ambient temperature: Appro. 0 C to +0 C Wall mount or attach to DIN rail 1 1 VLMW51 plug *1

8 One Panasonic Solution Greater peace of mind with interconnected Panasonic IP products IP Video Intercom / Network Camera ing IP Video Intercom System for Apartment Complees SIP Phone SIP Phone NVR NVR Recording Operation Specification Codec Format: H. (Fied) Image Resolution: 70p (18070 piels) or less Frame Rate: 0 fps or less Recommended Models * Eseries, ipro series Communication Main Features VLVN1900 Pure IP lobby station with a colour LCD monitor and wideangle camera. Elegant design and durable structure with a metallic panel..5inch colour LCD monitor (00 piels) s the resident's name Onscreen user guidance Wide angle camera Wide view of 10 degrees (horizontal), 7 degrees (vertical) Mechanical adjustment (up to +/ 15 degrees vertically).0 M piels provide a clear image (T.B.D.) Elock unlocking function Unlock the public door by using an IC card (Builtin MIFARE RFID) Unlock the public door by using a PIN code for each residence Strong and elegant eterior with an aluminium panel IP55 (T.B.D.), IK07 (T.B.D.) Phonebook (No., Resident s names) Theft detection buzzer VLMN1000 Pure IP room monitor with 7inch wide LCD and touch screen. Main Features 7inch wide LCD with capacitive touch screen Provides a clear image on the wide screen Accurate and smooth operation via a capacitive touch screen IP camera monitor various areas using a Panasonic Network Camera (Supported devices: Panasonic ipro series, Eseries) Standard PoE is supported can be supplied via Ethernet cable (PoE) also available (VLPS0 is sold separately) Video messages from the : up to most recent 50 Manual recording (videos): up to most recent 50 Auto/manual recording (still images): up to most recent 100 Elock unlocking (both individual and public doors) 5 sensor inputs (urgency/emergency button and other sensors) and 1 door bell input Recommended ModelNo. * KXHDV0 (Video and Audio) KXHDV0 (Audio) KXHDV10 (Audio) Main Features VLVN1500 Pure IP door station with a wideangle camera and RFID reader. Simple and sleek design. Wideangle camera Wide view of 10 degrees (horizontal), 7 degrees (vertical) (T.B.D.) 1. M piels provide a clear image (T.B.D.) Elock unlocking function Unlock the individual doors by using an IC card (Builtin MIFARE RFID) * Relay bo is required when connecting an Elock to the door station. (VLRLY1 is sold separately) Standard PoE is supported can be supplied via Ethernet cable (PoE) also available (VLPS0 is sold separately) Night vision with white coloured LED lights Theft detection buzzer Operation Specification Codec Format: H. (Fied) Image Resolution: 70p (18070 piels) WVGA (80080 piels) D1 (7057 piels) Frame Rate: /5/0 fps Control Bo VLVN devices are supported. Panasonic SIP Phone is available in the system. Main Features Embedded SIP server Supports 000 SIP devices (,, and Panasonic SIP Phone) Voice mail Voice mails can be issued by the SIP Phone to each room or grouped rooms Setup tool Easy to install Supports the barcode reader interface Recommended Models * Eseries, ipro series * Consult your certified Panasonic dealer for more information. notification* Received voice mail messages can be forwarded via , enabling quick access to important voice mail * Eternal mail server and an internet connection are required. 1 15

9 System Diagram of the Apartment System Support up to 00 devices on a system without a Control Bo Support up to,000 devices on a system with a Control Bo FUNCTION 00 SIP devices are supported Multiple sessions are supported Send tet mail from control room to all monitors Easy setup by PC tool FUNCTION,000 SIP devices are supported Multiple sessions are supported Remote maintenance Voice mail notification Send voice mail from control room to all monitors Easy setup by PC tool Residence Residence Residence Site 1 Residence Residence Residence Residence Residence Residence Common Area Entrance Parking Common Area Common Area Entrance Parking Common Area Common Area Entrance Parking Supply U Switch Switch Switch Guard Guard SIP Phone PC SIP Phone PC Remote maintenance under VPN NVR Control Bo NVR Switch Switch Gateway Internet 1 17

10 Analogue Video Intercom System for Apartment Complees Bo VLV701 Lift Controller VLV70 Etension Bo VLV70 Functions as a distribution bo or repeater. The function can be switched with a DIP switch. Controlling the destination of lifts Controlling the destination (floor) of visitors by linking with the lift and lift control bo. Device for etending the lobby stations. Role as a distribution bo Supported control methods Features A distribution bo for connecting the control bo with the main monitor of each room. Role as a repeater bo A repeater bo for amplifying the signal when the control bo and main monitor are far away from each other. Only one can be connected between the control bo and distribution bo #7. 1:1 control (Relay signalling) Binary control *The supported control method depends on the specifications of the lift and lift control bo. Contact the lift manufacturer for details. 18 lobby stations connectable etension boes per control bo lobby stations per etension bo VLV900 Main Line Up VLMWD7 VLMW51 VLMVN511 VLMV Features phone for the public entrance of housing complees. Destination display, calling, conversation, electric lock Guidance (simple usage for visitors) Wide angle camera : Horizontally: appro. 170 Vertically: appro. 115 Heat sensor: The backlight of the display and buttons are turned on when a visitor is detected..inch LCD / white backlit LCD Blue LED backlit buttons White coloured LED lights for night colour vision Unlock with PINcode number and name registration owner name display Connectable devices Security camera Access control Control Bo VLV700 Device for controlling the entire system Features Easy setup ( number registration) Easy connection check (Check connections between the control bo and main monitor of each room) Real time monitoring Log (SD card recording) Tet log: More than 90,000 items (date, caller, receiver, operation, status) Image log: 90,000 images (overwrite save) (visitors call) Connectable devices PC (for program settings) (for real time monitoring) source consumption (H W D) (Ecluding protruding sections) language Frequency range Eternal material Supported functions station bell release support Picture recording Voice changer PTZ Wireless monitor Etension monitor Repeater Smartphone connect notification Intercom call Other functions 00 V AC (50/0 Hz) Standby: Appro..5 W During operation: Appro. 10 W mm 85 g* 1 7inch wide colour / WVGA (80080 piels) English, Arabic Flame retardant PC+ABS resin, 1 door station input (VLV5L, VLV555, VLV55/V55U) 1 door bell input (for individual 1, for public 1) 00 images (up to 50 visitors (up to 8 still images per visitor)) Yes Pan, Tilt, Zoom (for VLV900, VLV555, VLV55/V55U) (VLWD1) * (VLMWD7) * (VLFKD) Yes (between main monitor, sub monitor, and etension monitor) Guard call security camera Emergency call 1000 V AC (50/0 Hz) Standby: Appro. 1.8 W During operation: Appro. 1 W mm 785 g* 1 85 g Ambient temperature: Appro. 0 C to +0 C, 5inch wide colour / WQVGA (807 piels) English.0 GHz to.81 GHz 1 door station input (VLV5L, VLV5) (for individual 1, for public 1) 00 images (up to 50 visitors (1 or 18 still images per visitor)) Yes (between main monitor and sub monitor) Guard call security camera Wall mount (mounting bracket supplied) *1 Including AC cable. The weight of the AC cable differs depending on the region. * VLRLY1 is required. * When sub monitors and etension monitors are used together, a total of up to sub monitors and etension monitors can be registered. * The main monitor must be connected to a wireless router that is connected to the Internet in order to use feature. supply unit (VLPS0) 00 V AC V DC, 0.5 A Standby: Appro. 1.8 W During operation: Appro. 10 W mm 5inch wide colour / WQVGA (807 piels) English, Arabic IEEE b/g/n. GHz Flame retardant ABS and PS resin 1 door station input (VLV5L, VLV5, VLV555, VLV55/V55U) 1 door bell input (for individual 1 *, for public 1) Guard call security camera Emergency call Supply 00 images (up to 50 visitors (up to 8 still images per visitor)) Yes Yes Pan, Tilt, Zoom (for VLV900) Pan, Tilt, Zoom (for VLV900, VLV555, VLV55/V55U) (VLW05) (VLFAN1, VLFAN (for India)) * supply unit (VLPS0) 00 V AC 1 door bell input 1 (for public 1) Guard call security camera Emergency call Supply Standby: Appro. 1. W During operation: Appro. 8 W mm 0 g.5inch colour / QVGA (00 piels) English 0 images (up to 0 visitors, 1 shot per visitor) 18 19

11 System Diagram of the Apartment Syste m Total System Control Bo Bo 50 room units total 1 unit 8 units 50 units VLV701 Dip switch Entrance lobby stations * Stan dard Mode (STD /END) * Repeater Mode (RPT/END) REPEATER TERMINATION ON ON REPEATER TERMINATION ON ON REPEATER TERMINATION ON ON VIDEO Wire, NP Bo Bo AUDIO Wire, NP Wire, NP VLV701 VLV701 #7 ( 7) Branches Common Area Control Bo VLV700 (NTSC/PAL) VIDEO Wire, NP 7 AUDIO Wire, NP VLV701 Bo #7 ( 7) VLV701 #7 ( 7) Access control Coa VLV900 Wire, NP Security Camera 1 SD Card* (sold separately) * GB or more capacities are required. AUDIO Wire, NP Access control 18 Repeater Mode* (RPT/END) Control Bo Control Bo Bo (Standard Mode *) Bo (Standard Mode *1*) Main Control Bo Bo (Repeater Mode *) Bo (Repeater Mode*) Bo (Standard Mode*) Control Bo the farthest Lift Controller Bo (RPT*) Control Bo VLV700 lifts Lift Controller USB System Control Bo Coa (NTSC) #7 ( 7) Bo (STD *) 0 Guard # #7 ( 7) Bo (STD *1) Bo (STD *) #7 ( 7) Bo (STD *1) Control Bo Bo (RPT*) Lift #7 ( 7) Bo (STD *1) Bo (STD *) ( 100 floors) Bo (STD *) 5 Bo (RPT*) Control Bo Security Control #5 ( 5) Main Bo (STD *1) 5 Etension Bo VLV70 Etension Boes can be connected to one Control Bo. s can be connected to each Etension Bo. Etension Boes do not operate as repeaters that allow longer distances between the Control Bo and s. s (VLV900) connected to Etension Boes (VLV70) cannot be called from the room units or terminals. 00 m 00 m 00 m 00 m 00 m 00 m VLV70 PC (Setting) (17 AWG) 100 m 100 m 100 m 100 m 100 m 100 m 5 Line ( AWG) Bo (STD *1) Control Bo Terminals Etension Bo VLV Wire, NP Wire diameter 0.5 mm 1. mm Wiring run Standard Mode*1 (STD/NOR) lobby stations or more s can be installed by adding Etension Boes. * Use PE (polyethylene)insulated cables. No You can etend the distance by using the repeater mode. System Diagram with Etension Bo VLV701 VLV701 Free application for smartphone support Wireless Wireless (for VLMWD7) (for VLMW51) (for VLMVN511) VIDEO Wire, NP Etension Bo VLV70 Bo Bo (NTSC/PAL) Main Wiring Distance Standard Mode* (STD/END) Parking distribution boes per branch Bo Wire, NP 1 Epandable options VLV900 Security Camera Standard Mode*1 (STD/NOR) Coa Wire, NP 1 Access control 0 room units per distribution bo Wire, NP (NTSC/PAL) Security Camera *1 Standard Mode (STD/NOR) VIDEO Wire, NP AUDIO Wire, NP VLV900 Coa VLV900 Control Bo #5 ( 5) Lift Controller Lift Controller 1

12 VLVN1900 series (IP Video Intercom System for Apartment Complees) VLV900 series (Analogue Video Intercom System for Apartment Complees) source consumption (H W D) (Ecluding protruding sections) language Network interface Wiring RFID card Epanded interface Image sensor SIP server Codec Setting source consumption (H W D) (Ecluding protruding sections) VLVN1900 (VLPS0) supply unit (VLPS0) 00 V AC Input: 00 V AC, 0. A (50/0 Hz) Output: V DC, 0. A mm (T.B.D.) (ecluding sections embedded into the wall) 1. kg (T.B.D.) 0 g Ambient temperature: Appro. 0 C to +50 C Ambient temperature: Appro. 10 C to +55 C (indoor use only).5inch colour display (00 piels) English, Arabic, French, Italian, German, Spanish and Dutch (T.B.D.) Only user guidance supports multiple language Resident s names are only in English Handsfree Ethernet II (DIX) 10BaseT/100BaseTX (auto negotiate) UTP (cat.5e or higher) 1.5 MHz RFID card (MIFARE) Elock 1 (NO/NC) Horizontally: Appro. 10, Vertically: Appro. 7 (T.B.D.) (15 angle adjusting, vertical only).0 M piels CMOS sensor (T.B.D.) 1 l (within appro. 50 cm from the camera lens) White coloured LED lights Embedded SIP server (up to 00 nodes) Video: H. codec, Audio: G.711 codec Setup tool IP55 *1 (T.B.D.) / IK07 (T.B.D.) Flush mount (flush mounting bo supplied) Wall mount or attach to DIN rail VLVN T.B.D. Standard PoE (80.af) or supply unit (VLPS0 * ) 00 V AC T.B.D. VLMN1000 *1 Water resistance is only assured if lobby station/the doorphone installed correctly according to the instructions in the Operating Instructions, and appropriate water protection measures are taken. * VLPS0 is sold separately Standard PoE (80.af) or supply unit (VLPS0 * ) 00 V AC T.B.D. 7inch wide colour display with touch screen (80080 piels) language English, Arabic, French, Italian, German, Spanish and Dutch (T.B.D.) Handsfree Handsfree Network interface Ethernet II (DIX) 10BaseT/100BaseTX (auto negotiate) Ethernet II (DIX) 10BaseT/100BaseTX (auto negotiate) Wiring UTP (cat.5e or higher) UTP (cat.5e or higher) RFID card 1.5 MHz RFID card (MIFARE) Epanded interface Elock 1 *Relay bo VLRLY1 is required (sold separately) Sensor input 5 (including emergency button) Horizontally: Appro. 10, Vertically: Appro. 7 (T.B.D.) Image sensor 1. M piels CMOS sensor (T.B.D.) 1 l (within appro. 50 cm from the camera lens) White coloured LED lights Codec Video: H. codec, Audio: G.711 codec Video: H. codec, Audio: G.711 codec Setting Setup tool Setting from the monitor screen or Setup tool Recording Internal memory (video with audio can be saved) IP5 *1 (T.B.D.) / (T.B.D.) Surface mount (mounting bracket supplied) or Surface mount (mounting base supplied) Flush mount (flush mounting bo sold separately) Eternal material PC+ABS resin PC+ABS resin Supported functions Unlock individual doors via the RFID card (MIFARE) ing through the IP camera Theft detection buzzer Emergency call / Urgency call Intercom calls between monitors (family or neighbours) Calls to SIP Phones (guard station, reception, etc.) Register up to s per monitor Register up to 18 SIP Phones per monitor mm Eternal material Aluminium Flame retardant PC+ABS resin Supported functions numbers using numbers 0 through 9 and letters A through F Phonebook (No., Resident s name) Theft detection buzzer Unlock lobby door via a PIN code or RFID card (MIFARE) Reception mode Recording images of visitors to NVR a BMP file set by the user (0180 piels) mm (T.B.D.) mm (T.B.D.) V AC, A, 50/0 Hz 0.5 kg (T.B.D.) 0.8 kg (T.B.D.) Under 5.0 kg Ambient temperature: Appro. 10 C to +55 C Ambient temperature: Appro. 0 C to +0 C VLVN1700 Control Bo 50 W (when fully mounted) mm 0 Front Cabinet: ABS, Lower / Upper Cabinet: Steel Remote maintenance Voice mail notification Supports up to 000 SIP devices (embedded SIP server) 88 Ambient temperature: Appro. 0 C to +0 C Ethernet 10BASET/100BASETX/1000BASET UTP (cat.5e or higher) Mountable to 19inch racks source consumption (H W D) (Ecluding protruding sections) languages Epanded interface Image sensor Eternal material Supported functions source consumption (H W D) (Ecluding protruding sections) Eternal material Log Supported functions VLV900 Supply supply unit (VLPS0) V DC, 0. A Standby: Appro. 1.9 W During operation: Appro..5 W VLV700 Control Bo Supply Standby: Appro..5 W During operation: Appro..7 W Save the tet logs and visitors images in the SD card (sold separately) Tet logs: More than 90,000 items, Images: 90,000 images USB connection (provide PC application/english) date and time setting (HH:MM DD/MM/YYYY) set the room number to the monitor estimate the status of the equipment in the system operation setting (terminal, pass code, and so on.) SD card (SDHC/SDXC): Log function VIDEO OUTPUT (NTSC up to 1) RJ11: Connect with system Horizon 170 Super wide view. VLV701 Bo ( mode / Repeater mode) Supply Standby: Appro. 1. W During operation: Appro..0 W VLPS0 Input: 00 V AC, 0. A (50/0 Hz) mm Supply Output: V DC, 0. A 0 g Ambient temperature: Appro. 0 C to +50 C (indoor use only) * VLV70 Lift Controller Standby: Appro. 0. W During operation: Appro.. W Flame retardant PC+ABS resin Wall mount or attach to DIN rail *1 Water resistance is only assured if the lobby station is installed correctly according to the instructions in the Installation Guide, and appropriate water protection measures are taken. * The supported control method depends on the specifications of the lift and lift control bo. Contact the lift manufacturer for details. 10 Standard mm (ecluding sections embedded into the wall).0 kg Ambient temperature: Appro. 10 C to +55 C.inch monochrome display (white backlit LCD) English Handsfree Support for electric lock releasing (entrance unlocking) 1 VIDEOIN (recommended Panasonic security camera) 1 Horizontally: Appro. 170 Vertically: Appro. 115 (1/ inch) CMOS sensor (appro. 1 M piels) 1 l (within appro. 50 cm from the camera lens) White coloured LED lights IP55* 1 / Compliant with IK07 Stainless steel (partially ABS and PC) Flush mount (flush mounting bo supplied) Guidance (simple usage for visitors) Night colour vision (white coloured LED lights) Heat sensor: The backlight of the display and buttons are turned on when a visitor is detected the resident s names Unlock with PINcode supply unit (VLPS0), V DC, 0. A mm 00 g Ambient temperature: 10 C to +50 C (indoor use only) Wall mount or attach to DIN rail ABS (flame retardant ABS resin) Dip switch Mode change ( mode/repeater mode) Termination setting (Normal/Terminal) ID setting (17 by binary number) Supported control methods 1:1 control (Relay signalling) Binary control VLV70 Etension Bo Standby: Appro. 1.5 W During operation: Appro. 1.5 W Etend s Supply