Ctdigi.com. Instruction manual. Production by S & W Technology Labs

Transcription

1 Ctdigi.com Instruction manual Production by S & W Technology Labs

2 I. Install app II. Guard camera Guard camera Introduction Accessory Sensor Scenario Guard 360 Introduction - Catalog - Install app Scenario III. App instruction Add new camera Alarm setting Reset password Camera operating IV. CMS instruction Install CMS Add new device and operating Record setting V. Wireless network video recorder KIT Introduction NVR instruction NVR box VI. NVR system Connect NVR with app Attention Q & A P1 P2 P3 P4 P5 P6 P7 P8 P9 P10 P11 P14 P15 P16 P17 P18 P19 P20 P21 P22 P25 P26 P29 P30 P31 P32 P33 P34 P37 P38 P40 P41 P42 P43 For better experience the convenience brought by these products, please download app before using them. 1, Scan the QR code. 2, Web address: Android 3, Registration IOS Create a new account. Tip: Using to register is recommended. -P1-

3 Guard One Guard 180 P2P Cloud Central Camera Unit WI-FI Audio SD card HD Image IR Cut Security House Nursing DIY Installation Live streaming at 960p video resolution Integrated Motion detection IR Night Vison SD card up to 64GB, 2 weeks data storage for 24 hours per day. Pan and tilt view from app Auto recording on any sensor activity Take remote snapshot Connect up to 63 external sensors Wi-Fi, Ethernet enabled Multi axis installation module Configurable siren on Guard One alerts -P2- -P3-

4 Accessory Upgrade your Guard One Sensor Guard One Connected with Wireless Sensors Full cover shell To disguise your camera with a fineness model Charging plate A mobile power supply connect with Guard One as a base plate Temperature and humidity detector Connect with Guard One to show temperature and humidity on the screen Wireless Keyboard Emergency call for help. Alarm switch. Wireless connectivity. Gas Detector Detector gas leakage at home. Inbuilt alarm. Wireless connectivity. AC powered. Motion Detector for Windows Protect windows area. Wide sensing field. Wireless connectivity. Battery powered. Door Open Detector Wireless connectivity. Battery inside with lifetime of 1 year. Easily stick to a door. External Antenna for long range. Motion Detector for Rooms Used in rooms and areas to get alert on unauthorized access, where camera cannot be installed. Wireless, connectivity. Battery powered. External antenna for long range. CO and Smoke Detector Detect fire or smoke. High frequency internal alarm. Wireless interface with camera hub. Button for functionality test. Uses 9V replaceable battery. -P4- -P5-

5 Scenario Gas Detector Monitoring through cloud Keyboard CO and Smoke Detector Motion Detector for Windows Door Open Detector Motion Detector for Rooms Able to connect maximum 64 external wireless sensors view on any device -P6- -P7-

6 Guard 360 P2P Cloud HD Image Panorama VR mode One 360 degree camera can solve visual blind angle. 4 picture modes. Zoom in any spot. Image correction on scale when zoom in. Gyroscope Controlling WI-FI Guard 360 is equipped with a fisheye lens and uses the core algorithm from Panorama Studio on the synthesis of panorama image, reduce occupancy of system, bandwidth and image edge bending correction. -P8- -P9-

7 Scenario App instruction Suitable in any place Add new camera Office Outdoor Exhibition 1, Make sure turn on all devices and connect them in same network. Plug in Shopping mall Convenience store VR Panorama Mode Be in the scene 2, Mate will detect new device most of the time. 3, After clicked in, name your camera and type password. Long tap to zoom in Click Easier to recognize -P10- -P11- Initial password

8 App instruction App instruction 4, If the app didn t detect the device, tap + in the top right corner, then tap Smart link. 5, When ready to connect, set the phone s speaker toward the camera within 10 cm. Use a pin to reset camera through the hole Distance with in 10 cm You will hear voice reminding if reset succeed Connecting If the connection failed, try step 5 again Router ID Make sure again the connection is under same network Password must contains digit and letter -P12- -P13-

9 App instruction 6, Besides Smart link, Add manually is also available. App instruction Alarm setting 1, After added new camera it will appears on device list like below. 2, Change your device s nickname any time. Device ID Alarm switch Rename Initial device password is shown on the bottom lable 3, Start Guard one alarm function. 4, Receive notification. EX. ID: Password: Switch on -P14- -P15-

10 App instruction 5, Connect camera and wireless sensors. 6, You can categorize sensors due to the function. App instruction Reset password 1, Tap the button on device list. 2, Tap Safety setting. 7, Click Confirmed before turn on sensor. 8, Turn on sensor to match with camera. 3, Tap administer password. 4, Save after password is changed. Tip: Initial password Sensors without switch: You will see the indicator light flashing after install battery, then it will match automatically. Notice the condition for setting password Sensors with switch: Click to turn on sensor to match. -P16- -P17-

11 App instruction App instruction Camera operating 1, Tap to enter camera control panel. 2, Control panel when maximized. Display date, time, temperature and humidity (Temperature and humidity detector needed) Display date, time, temperature and humidity (Temperature and humidity detector needed) Slide to adjust viewing angle Zoom in Slide to adjust viewing angle Audio switch Maximize Zoom in Alarm switch Screenshots Resolution Audio switch Screenshots Exit Restore Press and hold to open the real-time intercom Alarm switch Press and hold to open the real-time intercom -P18- -P19-

12 CMS instruction CMS instruction CMS installation 1, Download address: 3, Panel introduction Monitoring images Replay Log Settings Lock Tip: If you set password, you will need to input it to unlock. Device List 2, After installation, log in CMS without password. Add new device Rotate viewing angle No password Audio switch Slide function switch Previous/N ext Page Full screen Screen layout Left to right: 1 window, 4 windows, customize. The default language may not be English, select here -P20- -P21-

13 CMS instruction CMS instruction Add new device and operating 1, Add new device 1Click + or right click at Device List select Add device 3Manual add device Either way is feasible 3Input device s ID, password, nickname Tip: To check device s ID is the same way on Page 14. 2Sometimes the device will be detected automatically, left-click it and then click >> to add. Add Remove If you try to remove a device, do it the same as how you add it. -P22- -P23-

14 CMS instruction CMS instruction 2, Displays monitoring images EX. Drag test to the blank window 3, Monitoring images control When you have camera like Guard one can change viewing angle, you can use CMS to do it. Drag to here 1Click the right window. 2Use button to adjust. 3Switch on slide function. Press and hold left click on the image to change angle. It will take a few seconds to transmit the image due to the internet speed. If it failed like the picture at right, try again. -P24- -P25-

15 CMS instruction CMS instruction Record setting 1, Set save path 2, Start record 1open setting 1Right click on the window. 2Save after path is set 2Click Start Record Auto record can turn on based on your need. -P26- -P27-

16 CMS instruction CMS instruction 3, Stop record. 4 Record playback 1Right click stop record. 1Record interface. 2Notification on the bottom right of screen. Double click to enlarge window. 3Change the file name more easy to recognize. 2Open file Converting files to mp4 Audio switch Rename -P28- -P29-

17 Outdoor camera Wireless network video recorder KIT Wireless connectivity(wired available). Waterproof grade IP66. IR night vision. Live streaming resolution at 720p/960p/1080p based on type. Rugged and highly durable. Up to 8 pieces of camera connect with NVR system. NVR server Broadband or GSM mobile data connect to internet and I.O.T.. Import high performance wi-fi n module. External PA amplifier and LNA signal noise reduction. Compression code protection to prevent hacking. Self-regulation of stream and frame rate. Works without internet. -P30- -P31-

18 NVR instruction NVR instruction NVR box 1, Install hard drive: open screws on the bottom (red part), fix hard drive with screws (blue part) and connect with SATA. 3, Connection diagram NVR would still works without internet Up to 8 pieces of camera connect with NVR system. Hard drive fixed screws Back cover screws Hard drive area Pick one of two. 2, Interface. Transit images under same network. Transit images through cloud. Video source: VGA/HDMI USB The network interface Power supply -P32- Up to 8 users view in a same time. -P33-

19 NVR instruction NVR instruction NVR system 1, Right click on monitoring screen to enter setting. (Initial password: ) 3, In System setup > Network setup, check the box DHCP then apply. 2, Only System setup & Video Manage need to adjust. 4, In System setup > Screen setup, change resolution according to monitor. -P34- -P35-

20 NVR instruction NVR instruction 5, Add new camera in Video Manage. Note: The cameras have already matched in every kits, you can skip tutorial 5-6 unless you change a new one. 2 Refresh to get new camera 7, Set new password. In System setup > System Admin. System setup > System Admin 1Use cable to connect camera with server. 3When new camera appears on list, click it then Match Code. 6, If Match Code succeed, the new camera will shown on Added device. Cable can be removed after that. System Admin > User > Set password. (Initial password: ) Connect success -P36- -P37-

21 NVR instruction NVR instruction Connect NVR with app 1, Make sure NVR is online, under same network as your smartphone and memorize NVR s ID. 3, App operating vertical screen. Default showing style is 4 windows, double tap on single window to enlarge. Page 1/2 Page 2/2 Switch pages by shaking phone. NVR s information is shown on the bottom right. 2, NVR can only added manually. 4, App operating horizontal screen. Tap + > Add manually Finish information Double tap to enlarge. Shake to switch pages. -P38- -P39-

22 NVR instruction NVR instruction 5, Change password in app. Tap the icon Change initial password and save. Attention If you forget password, reset in NVR system. Note the conditions 1, Input a wrong password and click Ok. 6, If you have changed password in app, you will need to use new password to log in NVR system. 2, When it shows your password is incorrect, click left and right button at the same time until it changed. (Usually around 6-13 times) While clicking, do not move you mouse arrows out of this window. Same password you ve set in app. 3, When this window appeared, it means reset succeed, the new password is blank. -P40- -P41-

23 Q & A Q & A Q1: Why am I not getting an alarm immediately when it s triggered? A1: When alarm is triggered, it will take approximately 30s for the signal to transmit to your phone due to network latency. Q4: I ve already plug cable into NVR, but the status on screen shows offline and can t add it on app. A4: Check the box DCHP (Page 25) and wait until it shows online. Make sure your smartphone is under same network as NVR if you want to add it. Q2: What is the maximum distance between camera and detectors for a wireless connection? A2: The signal can be transmitted up to 100m without any blocking. Q5: The app does not display some images from NVR cameras. A5: Signal transition are sometimes affected by the network. If this happened, reopening the app will resolve the problem. Q3: The connection of all devices is correct, but it shows offline on app and can t get monitoring image? A3: Try to check the internet or restart all your device. -P42- -P43-