Catcher provides UART and USB logging. Suggest to use USB logging because: USB has some limitations thus you could choose to use UART logging.
|
|
|
- Mildred Brooks
- 6 years ago
- Views:
Transcription
1 Introduction to Catcher Logging Together, Copyright We MediaTek make the Inc. difference. All rights reserved.
2 Catcher Logging Catcher provides UART and USB logging For Smart Phone USB logging, users need another tool ADBRelayer See the following slides for more details Suggest to use USB logging because: USB has higher data rate. Reduce the risk of log lose. USB transmission is more reliable. Users don t have to select baud rate by USB friendly logging. USB has some limitations thus you could choose to use UART logging. See the appendix for USB logging limitations. Copyright MediaTek Inc. All rights reserved. 2012/2/29 1
3 UART Logging (1/5) Engineer Mode setting Press *# #: Device->Set UART->UART Setting Select UART * in TST-PS Config and TST-L1 Config Select the highest baud rate (e.g., ) Copyright MediaTek Inc. All rights reserved. 2012/2/29 2
4 UART Logging (2/5) Step1: Click Logging Mode button 1 Setp2: Select the DataBase file 2 Copyright MediaTek Inc. All rights reserved. 2012/2/29 3
5 UART Logging (3/5) Step 3: Select port and baud rate 3 Step 4: Click Connect button 4 Copyright MediaTek Inc. All rights reserved. 2012/2/29 4
6 UART Logging (4/5) Step 5: Click Default Filter button, and then select the appropriate filter in the Default Filter List dialog. 5 You should be able to start logging. Copyright MediaTek Inc. All rights reserved. 2012/2/29 5
7 UART Logging (5/5) Step 6: Click Disconnect button, and then choose Save Log to save the log file. 6 Copyright MediaTek Inc. All rights reserved. 2012/2/29 6
8 USB Logging (1/2) Enter EM mode (Press *# #: Device->Set UART->UART Setting) Select USB Port * in TST-PS Config and TST-L1 Config Choose the USB port with the biggest port number. E.g., If composite USB device is used, choose USB Port 2. Otherwise, choose USB Port. Composite USB device Not composite USB device Copyright MediaTek Inc. All rights reserved. 2012/2/29 7
9 USB Logging (2/2) Steps of using USB logging is the same as UART logging except: You can skip step 3: Catcher would use the default option USB Auto Connect. Catcher would connect the USB port with the biggest port number automatically. Copyright MediaTek Inc. All rights reserved. 2012/2/29 8
10 Smart Phone Logging (1/6) For Smart Phone MD logging, Catcher supports UART logging Modem logs are sent to PC via UART on MD side. However, the throughput is not enough for logging both L1 and PS. SD logging Modem logs are sent to AP side and recorded in SD card files USB logging Modem logs are sent to AP side and AP side will relay logs to PC via USB connection Supported from Catcher v Copyright MediaTek Inc. All rights reserved. 2012/2/29 9
11 Smart Phone Logging (2/6) For SD and USB logging, enable MDLogger on AP side first Press *#*# #*#* : SystemLog-> Modem These radio buttons are used to select the logging mode for ModemLog to start with Check/Uncheck this to make/cancel ModemLog auto start with the selected logging mode above when next time we boot up phone. This line of text tells the current state of ModemLog. Idle means ModemLog is not working. Click it to start logging Click it to stop logging Copyright MediaTek Inc. All rights reserved. 2012/2/29 10
12 Smart Phone Logging (3/6) SD logging: Since Filter Setting will be retrieved from SD card, please make sure catcher_filter.bin is placed under sdcard/mtklog/mdlog/ catcher_filter.bin is under the database folder Select SD Logging Mode and then click Start in Engineer Mode Click Stop to pause logging Modem logs will be stored under sdcard/mtklog/mdlog MDLog_0_2011_xxxx_xxxx_xx.dmp is PS log file MDLog_1_2011_xxxx_xxxx_xx.dmp is L1 log file. Users can open.dmp files by Catcher Copyright MediaTek Inc. All rights reserved. 2012/2/29 11
13 Smart Phone Logging (4/6) USB logging: Select USB Logging Mode and then click Start : Make sure ModemLog is in idle state. You cannot switch ModemLog from SD logging mode to USB logging mode. 1 2 These tells ModemLog is in USB logging mode now. Copyright MediaTek Inc. All rights reserved 2012/2/29 12
14 Smart Phone Logging (5/6) Open ADB Relayer When connecting, Catcher will check if ADB Relayer exists, and open ADB Relayer automatically if necessary Catcher will trigger ADB Relayer to connect/disconnect, so users don t have to press buttons Copyright MediaTek Inc. All rights reserved. 2012/2/29 13
15 Smart Phone Logging (6/6) Cather: Enter Logging Mode Steps are the same as UART logging except: Select Smart Phone Logging in Step Copyright MediaTek Inc. All rights reserved. 2012/2/29 14
16 Appendix Together, Copyright We MediaTek make the Inc. difference. All rights reserved.
17 Limitation of USB logging Limitation Can t use features related to sleep mode Note USB cable would disable sleep mode. If you want to enable sleep mode, please use UART logging. Can t use USB Web Camera / Mass Storage Can t use OTG, MTP, picture bridge These features can t coexist with USB COM port. These features can t coexist with USB COM port. Please use UART logging. Can t get the log if target asserts before MMI Can t dump memory if TST port is not set in the target Copyright MediaTek Inc. All rights reserved. 2012/2/29 16 USB port may not be initialized successfully. Please use UART logging. Target uses UART1 to do memory dump by default. Please use UART to dump.
18 How to Modify VID/PID Setting of Catcher (1/3) Catcher needs to identify the correct VID / PID to reconnect the target. For feature phone: If you modify the VID or PID of the device, you should modify the config.ini file in the Catcher folder. Step1: Open the <CatcherFolder>\config.ini. Find [Catcher_USB_AUTO_CONNECT] section. Step2: Add an addition value to the VIDPID property. Separate each value by a space Add a suffix ## if your device is a composite one. E.g. Vid_0e8d&Pid_0023## (config.ini ) [CATCHER_USB_AUTO_CONNECT] VIDPID=Vid_0e8d&Pid_0003 Vid_0e8d&Pid_0023## VID_1004&PID_6000_DIAGInterface Copyright MediaTek Inc. All rights reserved. 2012/2/29 17
19 How to Modify VID/PID Setting of Catcher (2/3) For smart phone: Since the VID and PID varies in different devices, please add the VID / PID of your Android device. Step1: Open the <CatcherFolder>\config.ini. Step2: Add [ADB_USB_AUTO_CONNECT] section. Append your VID_<vid>&PID_<pid> value. Separate each value by a space. E.g. Note that if you haven t modified config.ini properly, Catcher will stop logging when: Enable/Disable WiFi tethering USB cable is plugged out/in Target reboots [ADB_USB_AUTO_CONNECT] VIDPID=VID_0BB4&PID_0C03 VID_0BB4&PID_0004 Copyright MediaTek Inc. All rights reserved. 2012/2/29 18
20 How to Modify VID/PID Setting of Catcher (3/3) How to get the VID and PID value? Open device manager. (My computer -> Property -> Hardware ->Device Manager) Right click on you device and choose Property. For feature phone, please find your device under Port. For smart phone, please find you device under Android Phone You can find the VID and PID in Hardware Ids. Copyright MediaTek Inc. All rights reserved. 2012/2/29 19
21 Together, Copyright We MediaTek make the Inc. difference. All rights reserved.
SCD Live SPEED TECH A/S
SPEED TECH A/S Nybrovej 97. DK2820 Gentofte. Phone: +45 45938545 Fax: +45 45938544 www.doorcontrol.dk - info@speed-tech.dk Contents: SCD Live 1 INTRODUCTION... 3 1.1 DESCRIPTION... 3 1.2 DISCLAIMER...
Sierra Radio Systems. WiFly Configuration. Quick Reference. Version 1.0
Sierra Radio Systems WiFly Configuration Quick Reference Version 1.0 Hardware Connections SERIAL PORT CONNECTIONS FOR WIFLY DEVICE PROGRAMMING The serial port on the WiFly device provides a 3.3v logic
Cypress HX2VL Configuration Utility Blaster User Guide
Cypress HX2VL Configuration Utility Blaster User Guide Doc. # 001-70672 Rev. *B Cypress Semiconductor 198 Champion Court San Jose, CA 95134-1709 Phone (USA): 800.858.1810 Phone (Intnl): 408.943.2600 http://www.cypress.com
Kinetis Flash Tool User's Guide
Freescale Semiconductor Document Number: KFLASHTOOLUG User's Guide Rev. 0, 04/2016 Kinetis Flash Tool User's Guide 1 Introduction The Kinetis Flash Tool is a GUI application on Windows OS, aiming to offer
OpenDRO User s Guide (rev. 2) SHUMATECH. DRO-550 Software Upgrade Guide
SHUMATECH DRO-550 Software Upgrade Guide 1 Revision History Revision Description 1 Initial release 2 Updated to use BOSSA instead of SAM-BA Table of Contents Step 1. Download the OpenDRO Image... 2 Step
Lab 0: Intro to running Jupyter Notebook on a Raspberry Pi
Lab 0: Intro to running Jupyter Notebook on a Raspberry Pi Nick Antipa, Li-Hao Yeh, based on labs by Jon Tamir and Frank Ong January 24, 2018 This lab will walk you through setting up your Raspberry Pi
Quick Start Guide SBC21/NSD21/EC 21 SBC21 / EC21 / NSD21. Quick Start Guide. Copyright IC Nexus Corporation. All rights reserved
SBC21 / EC21 / NSD21 Quick Start Guide Copyright 2000 2013 IC Nexus Corporation. All rights reserved Release Notes Version Release Date Notes 1.0 June 2013 Initial release 2.0 October 2013 Correct some
Kinetis Flash Tool User's Guide
NXP Semiconductors Document Number: MBOOTFLTOOLUG User's Guide Rev 1, 05/2018 Kinetis Flash Tool User's Guide Contents Contents Chapter 1 Introduction...4 Chapter 2 System Requirements... 5 Chapter 3 Tool
vividwireless USB modem
1 USB modem 1 vividwireless USB modem Follow these simple steps to get yourself online using wireless broadband. Colour Status Reason Getting to know your USB MODEM Your USB modem is the device that plugs
Nuvoton 8051 ICP Programmer
Nuvoton 8051 ICP Programmer User Manual Revision 5.31, 2011/04/08 2010 Nuvoton Technology Corporation. All Rights Reserved. < Revision 5.31 > 1 Contents Revision History... 3 1 Introduction... 4 2 Hardware...
UPDATING THE SERVICE TOOL Updating the Service Tool with Prism 2
Updating the Service Tool with Prism 2 Updating the Modular Service Tool SD with Prism 2 Version 4.5.0 and higher The Modular Service Tool SD is equipped with the ability to update its software with the
Inventek Systems. es-wifi ISM4319-M3-EVB. Quick Start Guide
Inventek Systems es-wifi ISM4319-M3-EVB Quick Start Guide Installing the Inventek Systems ISM4319-M3-EVB Evaluation Board 1. Download and install Drivers http://www.inventeksys.com/specs/evb_driver_download_utility.zip
UPDATING THE SYSTEM MANAGER SD Updating the System Manager with Prism 2
Updating the System Manager with Prism 2 Updating the System Manager SD with Prism 2 Version 4.5.0 and higher 7. Click on the icon. The Job-Sites Window will appear. In the Type of CommLink
Mac OS X Driver Installation Guide
AX88772C/AX88772B/AX88772A/AX88760/AX88772 Revision 3.10 June 23 rd, 2014 1 Revision History Revision Date Description 1.00 2010/08/12 Initial release. 1.10 2011/04/27 Modified the script files in Appendix.
Wonde Proud Android 4.3 Car Navigation Box WP9320 User Manual
Wonde Proud Android 4.3 Car Navigation Box WP9320 User Manual WP9320 is Wonde Proud's new era for Android 4.3 GPS+GLONASS dual mode navigation. Following past model's stability and universal compatibility,
User Manual of Acer EasyLink v1.0
User Manual of Acer EasyLink v1.0 1 2010/01/05 Content 1. Preface... 3 2. Installation... 3 3. Launch Program... 8 4. Select Device... 11 5. Select APN Settings... 12 6. Connect/Disconnect... 12 2 1. Preface
PROMISE ARRAY MANAGEMENT ( PAM) USER MANUAL
PROMISE ARRAY MANAGEMENT ( PAM) USER MANUAL Copyright 2002, Promise Technology, Inc. Copyright by Promise Technology, Inc. (Promise Technology). No part of this manual may be reproduced or transmitted
Quick Start Guide 4/8/16-Ch DVR
Quick Start Guide 4/8/16-Ch DVR 1 1. Install Hard Drive &DVD Writer 1.1Install Hard Drive Notice: 1. Support two SATA hard drives. Please use the hard drive the manufacturers recommend specially for security
Xitron USB Interface Installation August, 2007 Revision 3
August, 2007 Revision 3 Overview This document describes installing the Xitron USB interface box and the software required to use it. The basic sequence is to install the RIP or plugin, then connect the
HV-320 DVB-T FPV TV Transmitter Box Quick Installation Guide
HV-320 DVB-T FPV TV Transmitter Box Quick Installation Guide PACKAGE CONTENTS 2 FRONT PANEL VIEW 2 BACK PANEL VIEW 2 BOARD VIEW 3 POWER ON 4 CONFIGURE THE TRANSMISSION PARAMETERS 5 BACKUP AND RESTORE DC
Remote Display User Manual
Remote Display User Manual 1 Contents: Introduction - Features... 3 Hardware Overview... 4 Quick-Start Guide... 5 Android Application Operation... 6 Launching and Connecting... 6 Main Display... 7 Configuring
Models Affected: Matrix T7xe/7xe consoles
Effective Date: June 12, 2015 Prepared by: Eric Chen Models Affected: Service Bulletin Matrix T7xe/7xe consoles troubleshooting Matrix T7xe/7xe consoles Bulletin Num. NB-1507008 Ver.2 DESCRIPTION Troubleshooting
MICRO-1356 MULTI-PROTOCOL READER
MICRO-1356 MULTI-PROTOCOL READER The Micro-1356 reader is a miniature multi-protocol RFID reader suited for embedded applications, such as handheld readers or door key card readers. The Micro-1356 has
Connection to Next-Lab devices via the wireless network
2015 Connection to Next-Lab devices via the wireless network Spl-Lab 31.10.2015 Table of Contents Introduction... 2 Configuration of the Wi-Fi module... 3 Configuration of the Wi-Fi module using PC...
Windows Me Plug-and-Play
LAB PROCEDURE 18 Windows Me Plug-and-Play OBJECTIVES 1. Remove Network Adapter from the system. 2. Install Network Adapter with Plug-and-Play (PnP). 3. Remove modem. 4. Install modem with Plug-and-Play
HDBOX. Heavy Duty Box - User Manual - DRAFT. Revision: 22 Feb 2017 HDBOX - USER MANUAL 1
HDBOX Heavy Duty Box - User Manual - DRAFT Revision: 22 Feb 2017 HDBOX - USER MANUAL 1 Table of Contents Table of Contents 2 Introduction 4 Driverless 4 Minimal Custom Cables 4 Can function standalone,
Quick Start Guide EX-9686U/A-L(A9) Copyright TOPSCCC Technology CO., LTD. All rights reserved
Quick Start Guide Copyright 2000 2014 TOPSCCC Technology CO., LTD. All rights reserved Release Notes Version Release Date Notes 1.0 June 2013 Initial release 2.0 October 2013 Correct some typo errors 3.1
A113X1 Development Kit
A113X1 Development Kit User Guide Revision: 4.0 Release Date: 2018-02-06 Amlogic, Ltd. COPYRIGHT 2017 Amlogic, Ltd. All rights reserved. No part of this document may be reproduced. Transmitted, transcribed,
MediaTek LinkIt Smart 7688 Get Started Guide
MediaTek LinkIt Smart 7688 Get Started Guide Version: 0.92 Release date: November 2015 Specifications are subject to change without notice. 2015, 2016 MediaTek Inc. Unauthorized reproduction of this information
Quick Start Guide 4/8/16-CH DVR.
Quick Start Guide 4/8/16-CH DVR 1. Install Hard Drive &DVD Writer 1.1 Install Hard Drive Notice: 1. Support two SATA hard drives. Please use the hard drive the manufacturers recommend specially for security
installation manual SALES AND ADMINISTRATION (toll free)
installation manual SALES AND ADMINISTRATION 800.637.2645 (toll free) 217.442.0611 sales@timeomatic.com TECHNICAL SUPPORT 866.637.2645 (toll free) service@timeomatic.com www.watchfiresigns.com Quick Start-Up
NERGY SIREN CONFIGURATION. Friday, May 06, 2016 Version 1.02
NERGY SIREN CONFIGURATION Friday, May 06, 2016 Version 1.02 Author Date Version Description SD 7/1/2014 1.00 Original Document JD 7/8/2014 1.01 Changes for public release SD 5/6/2016 1.02 Updates for SoundOff
HOW TO INSTALL E-LD TO E-xD USING CONNECTION TO USB CONSOLE
HOW TO INSTALL E-LD TO E-xD USING CONNECTION TO USB CONSOLE 1. Install the USB Drivers and connect a PC with a Terminal program (e.g. HyperTerminal) to the USB "Console" Port as instructed in the ENVIROMUX
Quick Start Guide 4/8/16/24-Ch DVR
Quick Start Guide 4/8/16/24-Ch DVR 1.1 Install Hard Drive 4/8/16/24-CH DVR Quick Start Guide Notice: 1.4/3/16-ch DVR supports one SATA hard drive. 24-ch DVR supports three SATA hard drives. Please use
FAQ s. 1. Device is frozen. Impossible to swipe finger on lock screen - Please either reboot or hard reset the device with below instructions
FAQ s R500 1. Device is frozen. Impossible to swipe finger on lock screen - Please either reboot or hard reset the device with below instructions Reboot - Long press power button until device shuts down
Windows Utility Operation Guide
SoftBank 004Z Utility Operations Guide (Windows PC)... 3-2 Overview... 3-2 Packet Communication Settings... 3-3 Connecting/Disconnecting... 3-4 Connection Record... 3-5 SoftBank 004Z Utility Operations
AHD MOBILE DVR User Manual (MR9504) ~ 1 ~
AHD MOBILE DVR User Manual () ~ 1 ~ Catalogue Chapter 1 Overview... 1 Chapter 2 Quick setup... 1 1.Device Installation... 1 2.User Login... 1 3.Set up the System time... 2 4.Set up cameras... 3 5.Wizard...
WiFi Camera (V380) Installation Manual. iphone IOS Android. PC Client available on
WiFi Camera (V380) Installation Manual iphone IOS Android PC Client available on www.av380.cn/index-en.html iphone IOS Smart Phone Installation WiFi smart link installation (with WiFi Network) 1. Open
CODE READER MAH 200. Quickstart Guide
CODE READER MAH 200 Quickstart Guide Designation of this documentation: Technical manual for the Code Reader MAH 200 Version of the described product: 1.0 Editorial version of this documentation: 02/05
MobileMapper 100 FAQs
MobileMapper 100 FAQs Date October 2010 1. Processor... 1 2. Memory... 1 3. Battery/Power... 2 4. GNSS... 2 5. Connectivity... 3 6. Communication ports... 4 7. Other... 4 1. Processor Q: What is MobileMapper
Media 1000 Product Guide
Agenda Chapter 1 Media 1000... 2 1.1. Introduction... 2 1.2. Specifications... 2 1.3. Media 1000 Features... 4 1.4. Remote Controller... 5 Chapter 2 Media 1000 Setup... 7 Chapter 3 Software Setup... 9
Installation Guidelines for KODAK SA101 Alarm System
Installation Guidelines for KODAK SA101 Alarm System CONTENTS I- Installing the central unit Pages 3-4 II- Home page Page 5 III- Central unit set-up Page 6 IV- Installation and settings: Pages 7-13 cameras
Installed Manually Windows Phone 8 On Android Device Driver Software Was Not Successfully
Installed Manually Windows Phone 8 On Android Device Driver Software Was Not Successfully Numerous users of Samsung devices have complained about not being able to you will not have to use the KIES software
USB-to-Serial Adapter Installation (5 Steps)
Specifications subject to change without notice. USA 160527 Page 1 of 6 USB-to-Serial Adapter Installation (5 Steps) The user should be familiar with their Windows operating system: XP, 7, 8, or 10. The
ELET4133: Embedded Systems. Topic 3 Eclipse Tour & Building a First App
ELET4133: Embedded Systems Topic 3 Eclipse Tour & Building a First App Agenda In this class we will look at the Eclipse IDE We will examine it s various parts when working on an application We will load
H.264 Network DVR. Quick Start
341Z H.264 Network DVR Quick Start GUI Display with USB Mouse Control Please read instructions thoroughly before operation and retain it for future reference. For the actual display & operation, please
IP Camera Quick Start Guide ==================== H Series V3.1
IP Camera Quick Start Guide ==================== H Series V3.1 1. Package Contents IP Camera 5V Power Adaptor Bracket and Screws Wi-Fi Antenna Network Cable Quick Start Guide 2. Get Started Step-1 Download
Magnetic Stripe Reader SERIES 1290 Operation Manual
Magnetic Stripe Reader SERIES 1290 Operation Manual Version 2.0 This equipment has been tested and found to comply with the limits for Class A digital device. Pursuant to Part 15 of the FCC Rules. These
Instruction Manual. Smart watch. Reference : TEC583 Version : 1.3 Language : English
Smart watch Reference : TEC583 Version : 1.3 Language : English WWW.CLIPSONIC.COM Thank you for buying our CLIPSONIC Technology product. We take great care in design, ergonomics and ease of use of our
TOSR14x. TOSR14x USB/Wireless Relay Module. User Manual. Tinysine 2015 Version 1.2
TOSR14x TOSR14x USB/Wireless Relay Module User Manual Tinysine Electronics @ 2015 Version 1.2 1 INTRODUCTION TOSR14x is an upgraded version of TOSR04. It supports password. It can be set to latching or
DSL/CABLE ROUTER with PRINT SERVER
USER S MANUAL DSL/CABLE ROUTER with PRINT SERVER MODEL No:SP888BP http://www.micronet.info 1 Content Table CHAPTER 0:INTRODUCTION... 4 FEATURES... 4 MINIMUM REQUIREMENTS... 4 PACKAGE CONTENT... 4 GET TO
InterVideo Home Theater Quick Start Guide
InterVideo Home Theater Quick Start Guide Welcome to InterVideo Home Theater! InterVideo Home Theater is your complete digital entertainment solution for you to enjoy TV viewing & recording, pictures,
wepresent Wireless interactive Presentation Gateway VW-4PHS User s Manual
wepresent Wireless interactive Presentation Gateway VW-4PHS User s Manual (Model Name: VW-4PHS) Version: 6.0 Date: January 11, 2013 Table of Contents Table of Contents 2 1. Overview... 4 2. Package Contents...
NETGEAR genie Apps. User Manual. 350 East Plumeria Drive San Jose, CA USA. August v1.0
User Manual 350 East Plumeria Drive San Jose, CA 95134 USA August 2012 202-10933-03 v1.0 Support Thank you for choosing NETGEAR. To register your product, get the latest product updates, get support online,
GEM80 & ewon Setup Quick Guide
Introduction to the ewon The ewon is an intelligent, programmable Ethernet Gateway, which can be used to bridge GEM 80 PLCs onto an Ethernet network, via the PLC serial port (Port3). This provides network-based
Setting up the Linksys Smart Wi-Fi Router using the Smart Setup Wizard
Setting up the Linksys Smart Wi-Fi Router using the Smart Setup Wizard This article will guide you on how to set up your Linksys Smart Wi-Fi Router using the Smart Setup Wizard. QUICK TIP: The Smart Setup
How To Connect A Quick Act Ps3 Controller. Without Usb >>>CLICK HERE<<<
How To Connect A Quick Act Ps3 Controller Without Usb the controller thanks to the program allowing the PS3/PS4 controller to act like forums.pcsx2.net/thread-xinput-wrapper-for-ds3-and-play-com-usb-dual-
FN-MAZDA3 Installation Manual
Manual Version: V20150401 FN-MAZDA3 Installation Manual Product Name: FN-Mazda3 Product Type: Interface with build in navigation Application: All Mazda 2014/2015 cars with new Mazda Connect systems What's
Bluetooth Light Gun. Please also see the Aimtrak Setup Guide at : Setup Guide.pdf
Bluetooth Light Gun Please also see the Aimtrak Setup Guide at : www.ultimarc.com/aimtrak Setup Guide.pdf 1 Contents Section 1: Introduction... 3 Features... 3 Bluetooth SIG Qualification.... 3 Section
4CH/ 8CH/ 16CH Digital Video Recorder
4CH/ 8CH/ 16CH Digital Video Recorder DVR204B/ 208B/ 216B INSTRUCTION MANUAL DIRECTORY CHAPTER 1 Hard Disk Installing (Standard shipping products include neither HDD or R/W)...2 CHAPTER 2 Panel Appearance...4
KENWOOD Remote Application. JVCKENWOOD Corporation. User Guide. Caution: Do not operate any function that takes your attention away from safe driving.
KENWOOD Remote Application JVCKENWOOD Corporation KENWOOD Remote Application User Guide Caution: Do not operate any function that takes your attention away from safe driving. CONTENTS GETTING STARTED 1
The following file is used for updating the boot loader: xboot.bin: XSTREAM development platform boot loader image
Firmware Upgrade Procedure This procedure is the only way to update the LCI-3 firmware. It requires a SanDisk USB SD Reader/Writer (or equivalent) and a 64MB SD memory card. Larger density cards (128MB
Quick Start Guide 4/8-CH DVR
Quick Start Guide 4/8-CH DVR 1 1. Install Hard Drive &DVD Writer 1.1 Install Hard Drive Notice: 1. this series support one SATA hard drives. Please use the hard drive the manufacturers recommend specially
What? Why? How? Dave Botherway November
What? Why? How? Dave Botherway November - 2016 Connecting any Computer-type devices PCs, Tablets, Phones, GPS Smart TV, Smart Watches, Fitbit-type devices Printers, Modems, Routers, Network Storage Keyboards,
VIDEO WEB SERVER. User s Manual. Please read instructions thoroughly before operation and retain it for future reference. PATENT 732 V1.
VIDEO WEB SERVER PATENT User s Manual Please read instructions thoroughly before operation and retain it for future reference. 732 V1.0 WARNING The apparatus shall not be exposed to dripping or splashing
9" TABLET MODEL: SC-999 USER MANUAL
9" TABLET MODEL: SC-999 USER MANUAL Preface Thank you for buying the MID. We wish you enjoy using it. Please read and retain all the operating instructions before operating the unit, we do not assume any
AX88178 Mac OS X Driver Installation Guide
AX88178 Revision 3.10 Nov. 10 th, 2016 1 Revision History Revision Date Description 1.00 2010/08/12 Initial release. 1.10 2011/04/27 Modified the script files in Appendix. 1.20 2011/08/15 Added Mac OS
WIRELESS RF MODEM SETUP MANUAL FOR CARDMASTER
WIRELESS RF MODEM SETUP MANUAL FOR CARDMASTER REV 07.03.12 www.cardlockvending.com customers call 888-487-5040 Installation Manual for CardMaster Wireless modem setup 1 TABLE OF CONTENTS PAGE 1 INSTALLATION
Android RIL Driver User Guide Version 1.0
Android RIL Driver User Guide Version 1.0 Copyright Neoway Technology Co., Ltd. 1 Copyright Neoway Technology Co., Ltd. 2017. All rights reserved. No part of this document may be reproduced or transmitted
Connection Sharing Plug-In PTC Inc. All Rights Reserved.
2017 PTC Inc. All Rights Reserved. 2 Table of Contents 1 Table of Contents 2 3 Overview 3 Connectivity Scenarios 4 Using a Dialup Modem 5 Index 6 3 Help version 1.006 CONTENTS Overview What is the? Connectivity
OK, enough of the introductions let s get started
Thank you for downloading a RileyROM from Freaktab.com. It is VERY IMPORTANT for you to read this set of instructions BEFORE you start ANYTHING!!! If you have questions about any procedure, browse the
NID- 7006A. Memory Powered by Android TM OS 4.1
THE NEW GENERATION IN TECHNOLOGY NID- 7006A Core TM 7 Tablet PC with 8GB Built- In Memory Powered by Android TM OS 4.1 Basic Introduction... 1 Quick Start... 1 Battery management and charging... 1 Boot
VCOM. User Manual. User Manual for VCOM Serial Device Driver. (November 2007)
VCOM User Manual User Manual for VCOM Serial Device Driver (November 2007) Table of Contents 1) INTRODUCTION... 3 1.1) System Requirements... 3 1.2) Software Installation... 3 1.3) System Startup... 5
DVR CH Digital Video Recorder SW242-LP4 / SW242-LPN
DVR4-1100 4CH Digital Video Recorder SW242-LP4 / SW242-LPN User Manual INDEX 1. DVR Features... 1 2. Layout 2.1 Front Panel...1 2.2 Rear Panel...2 2.3 Remote Controller...2 3. Installation 3.1 Installing
Installation instructions for USB cables SiLabs CP2102 chipset Please install driver before connecting cable!
TechnoFix UK Installation instructions for USB cables SiLabs CP2102 chipset This document contains four sections: 1. USB cable driver installation instructions 2. Instructions for CAT & CI-V cables 3.
Connection Guide (for KeyMission 80)
Connection Guide (for KeyMission 80) Table of Contents Installing the SnapBridge app... 2 Connecting the Camera and a Smart Device... 3 Image Upload and Remote Photography... 7 Troubleshooting... 9 This
Quick Start Guide 4/8/16-Ch DVR
Quick Start Guide 4/8/16-Ch DVR 1 1. Install Hard Drive &DVD Writer 1.1Install Hard Drive Notice: 1.This series support one SATA hard drive. Please use the hard drive the manufacturers recommend specially
NET-DYN USB Dual Band (Mediatek) Installation Guide. This manual is divided into three parts: Windows XP, Windows 7 / 8 / 8.
Installation Guide NET-DYN USB Dual Band (Mediatek) Installation Guide This manual is divided into three parts: Windows XP, Windows 7 / 8 / 8.1 /10, and Mac 1.Windows XP Please do the following steps to
IDWedgeKB Serial Port and NodeJS
IDWedgeKB Serial Port and NodeJS The IDWedgeKB is a barcode scanner that reads and parses the information encoded on the 2D barcode found on U.S. Drivers Licenses. IDWedgeKB has two modes of operation;
User Guide Laird Configuration and Test Utility Software. Version 1.0
A Version 1.0 REVISION HISTORY Version Date Notes Approver 1.0 07 Dec 2016 Initial Release N. Zach Hogya 2 CONTENTS DVK Software Installation... 4 PC Settings Tab... 4 Port 1/Port 2 Options... 5 Options...
set for a fixed view. Install the PTZ camera and the stationary camera in close proximity of each other
CHAPTER 3 3.1 Object Tracking and Zooming Object Tracking provides you the real-time tracking and automatic magnification of a single moving object by the combination of one PTZ camera and one stationary
XBee Starter Kit Getting Started Guide
XBee 802.15.4 Starter Kit Getting Started Guide 90002160_A 6/20/2012 2012 Digi International Inc. All rights reserved. Digi, Digi International, the Digi logo, the Digi web site, a Digi International Company,
SecureShot HC Quick Start Instruction Page
SecureShot HC Quick Start Instruction Page Your new SecurShot HC has been factory pre-programmed and tested to fit most applications. It is ready-to-go right out of the box. An SD card is installed, and
3 Connecting to a Controller
3 Connecting to a Controller In this chapter Connecting to controllers: Overview 36 Setting up communications for your PC 37 Configuring Modbus communications 37 Modbus communications by modem 39 Configuring
MalaRom flashing Guide
MalaRom 1.1.0 flashing Guide Introduction This guide is ONLY valid for MalaRom 1.1.0 and ONLY for 256 Mb devices! Please make sure to read the entire guide before you begin. Also if you have flashed your
Configuration Instructions for icap with DOS Captivator
Configuration Instructions for icap with DOS Captivator Introduction: DOS-based Cheetah Captivator may be used to transmit caption data to HD480 encoders via the icap system. Instead of using the traditional
Decoder Firmware B1D-220-V AC User s Manual Decoder Firmware B1D-220-V AC User s Manual
Decoder Firmware B1D-220-V3.03.07-AC User s Manual i Table of Contents INTRODUCTION 1 1.1 Minimum system requirements 1 1.2 Preparation before setup 2 1.2.1 Setup your PC network 2 1.3 Configuring the
Lab 03. Windows Operating Systems (Cont.)
Lab 03 s (Cont.) Objectives Develop a good understanding of 1. The role of an operating system in a computer system 2. Services provided by an operating system and have some hands on experience in 1. Understanding
User s Manual November 2004 V 1.1
User s Manual Please read instructions thoroughly before operation and retain it for future reference. November 2004 V 1.1 WS2 WARNING The apparatus shall not be exposed to dripping or splashing and that
Configurator Software Manual
Configurator Software Manual The information contained in this document is believed to be correct, but OMEGA accepts no liability for any errors it contains, and reserves the right to alter specifications
Paraben s Photo Backup Stick V2.1. User Manual
Paraben s Photo Backup Stick V2.1 User Manual About Paraben s Photo Backup Stick The Photo Backup Stick is an easy-to-use picture and video backup tool for Windows computers, Apple iphones and ipads, and
Programmable Control Panel USER MANUAL WP8. PTN Programmable Control Panel. Version: WP82013V1.1
USER MANUAL WP8 PTN Programmable Control Panel Version: WP82013V1.1 PTN Electronics Limited www.ptn-electronics.com NOTICE: Please read this user manual carefully before using this product. This manual
Checking the Firmware Version
Introduction This guide provides detailed information about how to upgrade T41S/T42S DD Phone. If the target major version is the same as the current one, you can upgrade the firmware in the DD phone mode
Chapter 1: CamFi Pro at Glance Packaging List CamFi Overview Chapter 2: Getting started...3. Charging Battery...
Contents Chapter 1: CamFi Pro at Glance... 1 Packaging List... 1 CamFi Overview... 1 Chapter 2: Getting started...3 Charging Battery...3 Quick Installation...3 How to replace the battery?...5 Firmware
HD 2CH Wi-Fi DVR FOCUS BLACK BOX
Biz conference material. HD 2CH Wi-Fi DVR FOCUS BLACK BOX Mobile App. Manual (v0.4) 1 / 22 Table of contents 1. Android App 1) App Download 2) App Layout 3) Wi-Fi Connection 4) Real-Time Video Mode on
- MANUAL FOR PC CONNECTION -
- MANUAL FOR PC CONNECTION - [STEP 1 : Software Requirements] To upload/download the channel plans or upload the stored file(s), you need both CP2102 USB to UART Bridge Controller driver and HyperTerminal
NT-1228BL. Quick Setup Guide V Connection Mode. Working via Bluetooth. Barcode Programming
NT-1228BL V18.7.12 Quick Setup Guide This model can work both via USB cable or via bluetooth. Connection Mode Working via USB cable Get Started: Connect scanner with your device via USB cable. If you use
If you experience issues at any point in the process, try checking our Troublshooting guide.
Follow along with this guide to set up your Omega2 for the first time. We ll first learn how to properly connect your Omega to a Dock and power it up. Then we ll connect to it to use the Setup Wizard to
CCTV42 System2 DVR Quick Start Guide 4/8/16-Ch DVR
CCTV42 System2 DVR Quick Start Guide 4/8/16-Ch DVR If you have purchased a DVR / Hard drive package from us then we will have already installed the hard drive(s) and configured the basic settings on your
BitPipe Cellular Dev-Kit
Rev 1.0 2016-09-02 1 Table of Contents Table of Contents... 2 Table of figures... 3 1. Revision history... 4 2. Introduction... 4 3. Included Material... 4 4. Requirements... 5 5. BitPipe Development Kit