Applications Guide P3LinkXtreme.com
|
|
|
- Sheena McCormick
- 6 years ago
- Views:
Transcription
1 PLinkXtreme.com Danco Road, Putnam, CT 0660 Phone: opticonx.com
2 Arista Networks 700E Switch and Linecard Optical Cabling Guide This cabling applications guide will assist you with the design of a fiber optic cabling system for Arista Networks 700E series data center switches. The 700E series switches and line cards feature software configurable 0/0/00G channels over the same interface port. The 700E is offered in two chassis versions. The DCS-70 is a slot, 7U chassis that accepts linecards and the DCS-708 is an 8 slot, U chassis that accepts 8 linecards. Arista offers different linecard variations: Arista DCS-700E-DM-LC is a port 00GbE SR0 MXP linecard with embedded optics. The ports are f MTP s that can be configured as x 0G, x 0G, or x 00G channels. A fully utilized MXP linecard requires 88 fibers. Arista DCS-700E-6Q-LC is a 6 port QSFP+ 0G linecard for 0/0G. The fiber ports are f MTP s that can be configured as x 0G or x 0G when used with 0/0G transition modules. A fully utilized linecard requires 88 fibers. Arista DCS-700E-7S-LC is a 8 port SFP+ for /0GbE and port 00GbE SR0 MXP linecard. The fiber ports are 8 LC duplex and x f MTP. The MXP ports can be configured as 0/0/00G ports. A fully utilized linecard requires fibers. Arista DCS-700E-8S-LC is a 8 port SFP+ linecard for wire-speed /0GbE. The fiber ports are 8 LC duplex. A fully utilized linecard requires 96 fibers. These Arista 700E series are typically deployed in a two tier leaf-spline configuration with 700E spline switches connected to 700S and/or 70S series leaf switches. 00G Switch to Switch Links With 00GbE links between 700E switches with DCS-700E-DM-LC or DCS-700E-7S-LC linecards, a f MTP jumper cable is run directly beween the MXP ports on the switch linecards. This cabling is best for inter-switch links when both switches are in close proximity, usually within the same row of cabinets. Figure : 00G Directly Connected Switches Danco Road, Putnam, CT 0660 Phone: opticonx.com
3 Bill of Material for Figure. OM f MTP to f MTP Non-Pinned Jumper; Plenum Cable; xxx Meters In larger networks where high fiber count MTP trunks are deployed, a structured cabling approach provides a scaleable and quickly reconfigured network. Inter-connection points between permanently installed trunks make changes and additions as easy as changing or adding jumpers. The trunks in these examples are f with f MTP legs, but can be higher counts as long they are increments of with f MTP legs. PXJDB99XMXXXG Figure : 00G Structured Cabling Connected Switches 0G Spline to Leaf Links Bill of Material for Figure. OM f MTP(non-pinned) to x f MTP(pinned) Transition Harness; Method ; Plenum Cable; PXTDB96X0GXXX MTP Adapter Panel MAPMPO06BLK OM f; x f MTP(non-pinned) to x f MTP(non-pinned) Trunk; Method A; Plenum Cable; XXX Meters; W/Pulling Eye attached OM f MTP(non-pinned) to x f MTP(pinned) Transition Harness; Method ; Plenum Cable; U FBX Series Patch Panel( not shown) to house item PXMDBXXXXMA PXTDB96X0HXXX FBX06ULG All MXP ports on 700E series linecards can be internally switch to transmit 0GbE to leaf switches or 700E linecards with QFSP+ ports. The Switch interface is f MTP, MXP port to f MTP QFSP+ port on Arista 700S-6 switches (x 0GbE+ ports) and 70S-6 switches(x 0GbE+ ports). Danco Road, Putnam, CT 0660 Phone: opticonx.com
4 With 0GbE directly connected links between 700E switches with DCS-700E-CM-LC or MXP ports on DCS-700E-7S-LC linecards and QFSP+ ports on 700S-6 and/or 70S-6 switches, a f MTP to x 8f transition cable is run directly beween the MXP ports on the switch linecards and QFSP+ ports on the leaf switches. This cabling is best for inter-switch links when both switches are in close proximity, usually within the same row of cabinets and all 0GbE ports are on the same leaf switch. Figure : 0G Directly Connected Switches Bill of Material for Figure. OM f MTP(non-pinned) to x 8f MTP(non-pinned) Transition Harness; Method ; Plenum Cable; xxx Meters; Breakout Legs PXTDB99X0FXXX In larger data centers where distances are greater and fiber counts are higher and switches are more widely deployed, a structured cabling system provides a much better approach to cable management, utilization, and organization. Trunks are run between inter-connect points near the switches. From there, transition modules, and jumpers complete the connection to switches. Different length jumpers can be used to connect to individual 0GbE ports located on same or different Leaf switches. Figure : 0G Structured Cabling Linked Switches Danco Road, Putnam, CT 0660 Phone: opticonx.com
5 Bill of Material for Figure. OM f MTP(non-pinned) to x f MTP(pinned) Transition Harness; Method ; Plenum Cable; PXTDB96X0GXXX MTP Adapter Panel MAPMPO06BLK OM f; x f MTP(non-pinned) to x f MTP(nonpinned) Trunk; Method A; Plenum Cable; XXX Meters; W/Pulling Eye attached PXMDBXXXXMA OM 0G Transition Module: x f MTP(pinned) to x 8f MTP Ports PXCDB66XLF OM f MTP(non-pinned) to f MTP(non-pinned) Jumper: Method A; Plenum Cable; XXX Meters PXJDB99XMXXXA 6 U FBX Series Patch Panel( not shown) to house item and FBX06ULG FBX08U In between directly connected and structured inter-connect links are inter-connect port linked switches. They are suited to small and mid sized installations where Leaf switches are clustered in close proximity to the Spline switch. A f MTP to x f MTP transition cable is run to a transition module, central to the Leaf switches. From this inter-connect point, jumpers are run to 0GbE ports on Leaf switches. This approach is best suited when connecting to multiple leaf switches in the same row, but in the different cabinets than the 700E switch. Figure : 0G Port Linked Switches Bill of Material for Figure. OM f MTP(non-pinned) to x f MTP(non-pinned) Transition Harness; Method ; Plenum Cable; OM 0G Transition Module: x f MTP(pinned) to x 8f MTP Ports PXTDB99X0GXXX PXCDB66XLF OM f MTP(non-pinned) to f MTP(non-pinned) Jumper: Method A; Plenum Cable; XXX Meters PXJDB99XMXXXA U FBX Series Patch Panel( not shown) to house item FBX08U Danco Road, Putnam, CT 0660 Phone: opticonx.com
6 0G Spline to Leaf Links The MXP ports on 700E series linecards can also be internally switch to transmit 0GbE to leaf switches or 700E linecards with SFP+ ports. The switch interface is f MTP, MXP port to duplex LC SFP+ ports on Arista 700S-, 700S-6, 70S-, 70S- and 70S-6 switches. Unlike 0/00G cabling systems, directly connected switches are not practical. Structured cabling and port cabling are the considered approaches. Figure 6 shows a structured cabling approach and is best in medium and large scale network installations. 0GbE configured MXP ports are inter-connected to f trunks with f MTP legs and f MTP to LC transition modules, centrally located to the Leaf switches. Duplex LC jumpers complete the 0GbE link to SFP+ ports on the Leaf switch. Various length jumpers can be used to reach SFP+ ports on multiple switches in different cabinets. Figure 6: 0G Structured Cabling Linked Switches Bill of Material for Figure 6. OM f MTP(non-pinned) to x f MTP(pinned) Transition Harness; Method ; Plenum Cable; PXTDB96X0GXXX MTP Adapter Panel MAPMPO06BLK OM f; x f MTP(non-pinned) to x f MTP(nonpinned) Trunk; Method A; Plenum Cable; XXX Meters; W/Pulling Eye attached PXMDBXXXXMA OM 0G Transition Module: f MTPto 6 Duplex LC Ports; Polarity Method PXCDBXL OM Duplex LC to Duplex LC Jumper; Plenum Cable; XXX Meters PXJDBXMXXX 6 U FBX Series Patch Panel( not shown) to house item and FBX06ULG FBX08U Danco Road, Putnam, CT 0660 Phone: opticonx.com
7 When the 700E switch is in proximity to the 0GbE Leaf switches and the cable runs are short, as may be the case in smaller network installation, a structured cabling port linked approach can be used. A f MTP to x f MTP transition cable is run to a MTP to LC transition module central the leaf switches. From this inter-connect point, jumpers are run to 0GbE ports on Leaf switches. Figure 7: 0G Port Linked Switches Bill of Material for Figure 7. OM f MTP(non-pinned) to x f MTP(non-pinned) Transition Harness; Method ; Plenum Cable; OM 0G Transition Module: f MTPto 6 Duplex LC Ports; Polarity Method PXTDB99X0GXXX PXCDBXL OM Duplex LC to Duplex LC Jumper; Plenum Cable; XXX Meters U FBX Series Patch Panel( not shown) to house item PXJDBXMXXX FBX08U 0G Links for QSFP+ Linecard Ports A DCS-700E-6Q-LC is a 6 port QSFP+ 0/0G switchable linecard. It requires a different cabling scheme than the MXP ports in our previous cabling examples. The fiber ports are f MTP s that can be configured as x 0G or x 0G ports. A fully utilized linecard requires 88 fibers. This linecard can use the same structured cabling trunks(f with f MTP legs) as the MXP configured linecard ports. Only the inter-connect portion of the link is different. 0G, x transition modules inter-connect trunks and switches with f MTP jumpers. Danco Road, Putnam, CT 0660 Phone: opticonx.com
8 Figure 8: 0G Structured Cabling Linked Switches with QFSP+ Ports Bill of Material for Figure 8. OM f; x f MTP(non-pinned) to x f MTP(nonpinned) Trunk; Method A; Plenum Cable; XXX Meters; W/Pulling Eye attached OM 0G Transition Module: x f MTP(pinned) to x 8f MTP Ports PXMDBXXXXMA PXCDB66XLF OM f MTP(non-pinned) to f MTP(non-pinned) Jumper: Method A; Plenum Cable; XXX Meters PXJDB99XMXXXA OM f MTP(non-pinned) to f MTP(non-pinned) Jumper: Method A; Plenum Cable; XXX Meters PXJDB99XMXXXB U FBX Series Patch Panel( not shown) to house item FBX08U In smaller network installations or when switches are located in close proximity say for instance when switches are located within the same row of cabinets, directly connected links are an option. f MTP jumpers are run directly between switches. Figure 9: 0G QSFP+ Directly Connected Switches Danco Road, Putnam, CT 0660 Phone: opticonx.com
9 Bill of Material for Figure 9. OM f MTP(non-pinned) to f MTP(non-pinned) Jumper; Method A; Plenum Cable; xxx Meters; PXJDB99XLMXXXB QSFP+ ports on DCS-700E-6Q-LC linecards configured as 0GbE links require a transition from f MTP QSFP+ at the 700E switch to duplex LC SFP+ at the leaf switch. An MTP to LC 0GbE module and duplex LC jumpers replace the 0GbE transition module and f MTP jumpers at the leaf switch. 0G Structured Cabling Linked Switches for QSFP+ to FSP+ Ports Figure 0: 0G Structured Cabling Linked Switches with QFSP+ and SFP+ Ports Bill of Material for Figure 0. OM f; x f MTP(non-pinned) to x f MTP(nonpinned) Trunk; Method A; Plenum Cable; XXX Meters; W/Pulling Eye attached OM 0G Transition Module: x f MTP(pinned) to x 8f MTP Ports PXMDBXXXXMA PXCDB66XLF OM 0G Transition Module: f MTPto 6 Duplex LC Ports; Polarity Method PXCDBXL OM f MTP(non-pinned) to f MTP(non-pinned) Jumper: Method A; Plenum Cable; XXX Meters PXJDB99XMXXXA OM Duplex LC to Duplex LC Jumper; Plenum Cable; XXX Meters PXJDBXMXXX 6 U FBX Series Patch Panel( not shown) to house item FBX08U Danco Road, Putnam, CT 0660 Phone: opticonx.com
10 Arista Networks Cables Cross Reference sheet Arista Description Opticonx Part Number Multimode OM Fiber - meter(6ft) lengths Part number CAB-MPMP-M OM MTP to MTP - Direct connect for port to port (swaps the Tx and RX rows), m CAB-MPMP-M OM MTP to x MTP - Direct connect for x MTP SR to QFSP+ SR, m CAB-MPLC-M OM MTP tox LC - Direct connect for x MTP SR to SFP+ SR, m PXJDB99XM00G PXTDB99X0F00 PXTDB9X80G00 CAB-MPMT-M OM MTP to MTP - Port to trunk,non-pinned to pinned, m PXJDB96XM00A CAB-MPMT-M CAB-MPMP-M OM MTP to X MTP - Port to x fiber trunks, non-pinned to pinned, m OM MTP to MTP - Direct connect for port to port (8fiber cross over), m CAB-MPMT-M OM MTP to MTP - Port to trunk, non-pinned to pinned (8 fiber), m CAB-MPLC-M OM MTP to LC - Direct connect for x QSFP+ SR TO SFP+ SR, m CAB-MPMP -S Single Mode Fiber - meter(6ft) lengths SM MTP to MTP - Direct connect for port to port ( fiber cross over), m CAB-MPMT-S SM MTP to MTP - Port to trunk, non-pinned to pinned (8 fiber), m CAB-MPLC-S SM MTP to LC - Direct connect for x QSFP+ PLRL to SFP+ LR, m CAB-MPMP-M Multimode OM Fiber - meter(0ft) lengths OM MTP to MTP - Direct connect for port to port (swaps the Tx and RX rows), m CAB-MPMP-M OM MTP to x MTP - Direct connect for x MTP SR to QFSP+ SR, m CAB-MPLC-M OM MTP tox LC - Direct connect for x MTP SR to SFP+ SR, m PXTDB96X0J00 PXJDB99XM00B PXJDB96XM00A PXTDB9X8F00 PXJAB99XM00B PXJAB96XM00A PXTBA9X8F00 PXJDB99XM00G PXTDB99X0F00 PXTDB9X80G00 CAB-MPMT-M OM MTP to MTP - Port to trunk,non-pinned to pinned, m PXJDB96XM00A CAB-MPMT-M CAB-MPMP-M OM MTP to X MTP - Port to x fiber trunks, non-pinned to pinned, m OM MTP to MTP - Direct connect for port to port (8fiber cross over), m CAB-MPMT-M OM MTP to MTP - Port to trunk, non-pinned to pinned (8 fiber), m CAB-MPLC-M OM MTP to LC - Direct connect for x QSFP+ SR TO SFP+ SR, m CAB-MPMP -S Single Mode Fiber - meter(0ft) lengths SM MTP to MTP - Direct connect for port to port ( fiber cross over), m CAB-MPMT-S SM MTP to MTP - Port to trunk, non-pinned to pinned (8 fiber), m CAB-MPLC-S SM MTP to LC - Direct connect for x QSFP+ PLRL to SFP+ LR, m PXTDB96X0J00 PXJDB99XM00B PXJDB96XM00A PXTDB9X8F00 PXJAB99XM00B PXJAB96XM00A PXTBA9X8F00 Danco Road, Putnam, CT 0660 Phone: opticonx.com
Solutions. Solutions FOR DATA CENTERS AND STORAGE AREA NETWORKS
Solutions Solutions FOR DATA CENTERS AND STORAGE AREA NETWORKS Xtreme8 is Opticonx s Base-8 cabling solution for easy migration of 10/40/100 and 400G parallel optics deployments in the data center. This
Solutions FOR DATA CENTERS AND STORAGE AREA NETWORKS
Solutions FOR DATA CENTERS AND STORAGE AREA NETWORKS Xtreme12 is Opticonx s Base-12 cabling solution for easy migration of 10/25/40/50/100 and 400G parallel optics deployments in the data center. This
Connectivity Solutions Utilizing Base-8 Structured Cabling
Engineering Services Department 800 7th St NW PO Box 489 Hickory, North Carolina 860-0489 800 74-67 f 88 90-55 www.corning.com/cablesystems Connectivity Solutions Utilizing Base-8 Structured Cabling AEN
ARISTA 7500R/7500E/7300X Connectivity Guide CABLExpress 1. ARISTA 7500R/7500E/7300X Connectivity Guide
ARISTA 7500R/7500E/7300X Connectivity Guide CABLExpress 1 ARISTA 7500R/7500E/7300X Connectivity Guide How do you protect and improve the functionality of your critical processes? You have to Respect Layer
Arista 40G Cabling and Transceivers: Q&A
Arista 40G Cabling and Transceivers: Q&A 40G Cabling Technical Q&A Document 40Gigabit Cables and Transceivers Q. What 40G cables and transceivers are available from Arista? A. Arista supports a full range
Choosing the Correct Harness for your Switch
Choosing the Correct for your Switch AEN 157, Revision: 3 This Application Engineering Note will serve as a guide to selecting the best Corning Optical Communications MTP to LC harness for your structured
Corning Distance and Link-Loss Budgets for the Cisco 40GbE BiDi Transceiver
9 0 Corning Distance and Link-Loss Budgets for the Cisco 0GbE BiDi Transceiver This paper discusses the following topics for the Cisco bidirectional (BiDi) transceiver: Cisco quad small-form-factor pluggable
A Fork in the Road OM5 vs. Single-Mode in the Data Center. Gary Bernstein, Sr. Director, Product Management, Network Solutions
A Fork in the Road OM5 vs. Single-Mode in the Data Center Gary Bernstein, Sr. Director, Product Management, Network Solutions Outline Definition of Enterprise and Cloud Data Centers The Growth of Cloud
PreCONNECT OCTO PRODUCT INFORMATION
PreCONNECT OCTO PRODUCT INFORMATION Applications Infrastructure and IT room cabling within data centers System consists of: Factory assembled OFNR Riser or OFNP Plenum rated n x 8 fiber Microunit Breakout
Don t Get Left Behind: Cabling Designs You Can Trust to Support Speeds of 32G to 400G
Don t Get Left Behind: Cabling Designs You Can Trust to Support Speeds of G to 00G Dave Fredricks Data Center Infrastructure Architect #DATACENTERWORLD #CPEXPO CHANNELPARTNERSCONFERENCE.COM DATACENTERWORLD.COM
Arista 400G Transceivers and Cables: Q&A
Arista 400G Transceivers and Cables: Q&A What are the benefits of moving to 400G technology? 400G Transceivers and Cables Q&A Arista s 400G platforms allow data centers and high-performance computing environments
Optics Modules and Cables Data Sheet
Optics Modules and Cables Data Sheet Key Features Deployment flexibility of 100GbE, 40GbE, 25GbE, 10GbE or 1GbE modules Smallest and lowest power SFP optic module form factor for 1GbE, 10GbE and 25GbE
Simplify Fiber Optic Cabling Migrations with a Multi-Path System
Simplify Fiber Optic Cabling Migrations with a Multi-Path System By Dave Fredricks, Data Center Infrastructure Architect, CABLExpress and Rick Dallmann, Sr. Data Center Infrastructure Architect, CABLExpress
ARISTA WHITE PAPER Arista 7500E Series Interface Flexibility
ARISTA WHITE PAPER Arista 7500E Series Interface Flexibility Introduction: Today s large-scale virtualized datacenters and cloud networks require a mix of 10Gb, 40Gb and 100Gb Ethernet interface speeds
The Impact of Emerging Data Rates on Layer One Fiber Cabling Infrastructures. Rick Dallmann Senior Data Center Infrastructure Architect CABLExpress
The Impact of Emerging Data Rates on Layer One Fiber Cabling Infrastructures Rick Dallmann Senior Data Center Infrastructure Architect CABLExpress 36 Years of Experience CABLExpress is a manufacturer of
Structured Cabling Design for Large IT/Service Provider Data Centres. Liang Dong Yuan, Technical Sales manager, CDCE
Structured Cabling Design for Large IT/Service Provider Data Centres Liang Dong Yuan, Technical Sales manager, CDCE Structured Cabling Design for Large IT/Service Provider DCs Outline Section Industry
Optical Trends in the Data Center
Optical Trends in the Data Center Romeo Lazar Sales Manager, Eastern Europe Corning Optical Communications EMEA September 2016 Agenda Agenda Corning overview Data Center Server and Switch Trends Standards
Connector and Cable Specifications
Connector Specifications, page 1 Console Port, page 3 Cables and Adapters, page 3 Connector Specifications 10/100/1000 Ports (Including PoE) All 10/100/1000 ports use standard RJ-45 connectors and Ethernet
HIGH DENSITY DATA CENTER CABLING GUIDE. Optics DACs Cables Cable Management Fiber TAPs Media Converters
HIGH DENSITY DATA CENTER CABLING GUIDE Optics DACs Cables Cable Management Fiber TAPs Media Converters PROVIDING MTP CABLING SOLUTIONS FOR THE SMART DATA CENTER. APPROVED NETWORKS SETS THE STANDARD The
Opt-X Unity. Fiber Optic Migration System
Opt-X Unity Fiber Optic Migration System PRE-TERMINATED FIBER MIGRATION SYSTEM The Opt-X Unity 40, 100, 200, 400 Gb/s system offers an ideal migration path to speeds beyond 10 GbE, and meets IEEE and MSA
Ixia Flex Tap PASSIVE NETWORK MONITORING HIGHLIGHTS KEY FEATURES. Data Sheet
Ixia Flex Tap Data Sheet PASSIVE NETWORK MONITORING The Ixia Flex Tap provide reliable continuous visibility of 100% of network traffic to support performance and security with no network performance degradation
Optics Modules and Cables Data Sheet
Key Features Deployment flexibility of 100GbE, 40GbE, 10GbE or 1GbE modules Smallest and lowest power 10GbE optic module form factor Hot swappable to maximize uptime and simplify serviceability SFP+ Optical
40G and 100G Products
40G and 100G Products QSFP+ esr4 QSFP+ 40G extended range transceiver, in excess of 300m QSFP-40G-SR4 Application The Prolabs QSFP+ esr4 transceiver has been designed to reach distances which can be up
Conflicts in Data Center Fiber Structured Cabling Standards
Conflicts in Data Center Fiber Structured Cabling Standards By Dave Fredricks, CABLExpress Data Center Infrastructure Architect Various telecommunications and data center (DC)-specific standards are commonly
Pretium EDGE HD Solutions A LANscape Pretium Solutions Product
Pretium EDGE HD Solutions for Enterprise Data Centers and Storage Area Networks Corning Pretium EDGE HD solutions create a fiber optic tip-to-tip solution for data centers and storage area networks (SANs)
Opt-X Unity. Fiber Optic Migration System
Opt-X Unity Fiber Optic Migration System PRE-TERMINATED FIBER MIGRATION SYSTEM The Opt-X Unity 40, 100, 200, 400 Gb/s system offers an ideal migration path to speeds beyond 10GbE, and meets the IEEE and
24-Fiber MPO System 10/40/100 GbE Migration Solution HIGH DENSITY EQUIPMENT PANEL (HDEP) ORDERING GUIDE
4-Fiber System 10/40/100 GbE Migration Solution HIGH DENSITY EQUIPMENT PANEL (HDEP) ORDERING GUIDE Table of Contents HDEP System Overview 3 HDEP 4-Fiber Interconnect System 10 Gigabit Interconnect Introduction...
100G MACsec Solution: 7500R platform
100G MACsec Solution: 7500R platform Data Sheet Product Highlights Density and Performance 36x100GbE on a 1RU line card Scales to up to 576 wire speed ports of 100GbE MACsec in a 7500R system Full IEEE
Arista 7500 Series Interface Flexibility
Arista 7500 Series Interface Flexibility Today s large-scale virtualized datacenters and cloud networks require a mix of 10Gb, 25Gb, 40Gb, 50Gb and 100Gb Ethernet interface speeds able to utilize the widest
Plexxi HCN Compatibility Matrix
Plexxi HCN Compatibility Matrix Document Version 9.1 December 15, 2017 100 Innovative Way - Suite 3322 Nashua, NH 03062 Tel. +1.888.630.PLEX (7539) www.plexxi.com Legal Notices The information contained
Plug & Play Universal Low-Loss Systems A LANscape Pretium Solutions Product
Applications Data Center LAN/SAN Enterprise Building Backbone -to-the-desk Description Plug & Play Universal Systems are preterminated optical fiber cabling systems designed to dramatically improve performance
The Arista Universal transceiver is the first of its kind 40G transceiver that aims at addressing several challenges faced by today s data centers.
ARISTA WHITE PAPER QSFP-40G Universal Transceiver The Arista Universal transceiver is the first of its kind 40G transceiver that aims at addressing several challenges faced by today s data centers. Increased
Base 8 Plug & Play. Fiber Solutions
Base 8 Plug & Play Fiber Solutions WWW.SIEMON.COM 8 About Base 8 Plug & Play Current 40 Gig (40GBASE-SR4) and 100 Gig (100GBASE-SR4) multimode fiber applications, as well as future 200 and 400 Gig multimode
Ultra High Density Fiber Enclosure
LightStack Ultra High Density Fiber Enclosure As today s high density Data Centers migrate from 10 to 40 and 100 gigabit speeds, they require low loss fiber connectivity to support multiple mated connections
24-Fiber MPO System. 10/40/100 GbE Migration Solution High Density Equipment Panel (HDEP) Ordering Guide
4-Fiber System 10/40/100 GbE Migration Solution High Density Equipment Panel (HDEP) Ordering Guide Table of Contents HDEP System Overview... 3 HDEP 4-Fiber Interconnect System 10 Gigabit Interconnect Introduction...4
Adrian Young Leviton Network Solutions
Adrian Young Leviton Network Solutions In This Session Multimode fiber types How many fibers do I need for my application? Future IEEE and non IEEE applications Will my existing fiber plant support these?
EDGE8 Solutions. EDGE8 Solutions Introduction
EDGE8 Solutions EDGE8 Solutions Introduction Corning ClearCurve bend-optimised multimode and SMF-28 single-mode optical fibres are the core element of the system ensuring reliability when designing custom-engineered
Pretium EDGE FX Solutions
Pretium EDGE FX Solutions for Enterprise Data Centers and Storage Area Networks Corning Cable Systems Pretium EDGE FX Solutions create a fixed-tray fiber optic tip-to-tip solution for Data Centers and
10-GbE XFP and SFP+ Transceiver Modules
LXP-10G-MMLC LXP-10G-SMCL10 LXP-10G-CX4 Product Data Sheet 10-GbE XFP and SFP+ Transceiver Modules Overview The 10-GbE XFP and SFP+ Transceiver Modules enable you to take advantage of 10-GbE connectivity.
Pretium EDGE Solutions Harness, 12 fibres,
Corning Cable Systems LANscape Pretium EDGE (Evolved -Density, Growth -Enabled) Solutions are high density pre -terminated optical cabling systems that simplify installation and improve performance in
Opt-X Enterprise Fiber Trunk Cables
APPLICATION Factory-terminated and tested fiber trunk cables connect central patching locations to zones or pods. Available terminated with both modular (MTP ) and discrete connectors, these trunks are
Supported Hardware Components
This chapter contains information about the supported hardware components on the Cisco ASR 1001-HX Router and Cisco ASR 1002-HX Router, and contains the following sections: Supported EPAs, page 1 Supported
Plug & Play Universal Systems
Corning Cable Systems Plug & Play Universal Systems create a fiber optic tip-to-tip solution for data centers and storage area networks (SANs) consisting of housings, modules, panels, harnesses, trunks
DELL EMC NETWORKING TRANSCEIVERS AND CABLES
DELL EMC NETWORKING TRANSCEIVERS AND CABLES Features and benefits Hot-swappable for simplified maintenance (no power-down required for installation or replacement) Some of the smallest and lowestpower
Arista 7500E Series: Q&A
Arista 7500E Series: Q&A Contents Product Overview 1 Advanced Features 4 Scalability 4 Latency Analyzer (LANZ) 7 Port Mirroring 8 Precision Time 9 Wire-speed VXLAN Gateway 9 General Information 12 Arista
The migration path from 10G to 40G and beyond for InstaPATCH 360, InstaPATCH Plus and ReadyPATCH installations
The migration path from 10G to 40G and beyond for InstaPATCH 360, InstaPATCH Plus and ReadyPATCH installations White Paper www.commscope.com Contents Introduction 3 CommScope solution overview 3 InstaPATCH
PreCONNECT DUODECIM PRODUCT INFORMATION
DUODECIM PRODUCT INFORMATION Applications Infrastructure and IT room cabling within data centers System consists of: Factory assembled FO breakout and loose tube cables, FRNC-LSZH indoor cables, up to
Opt-X Unity. 40/100G Fiber Optic System
Opt-X Unity 40/100G Fiber Optic System PREPARE FOR 40/100G WITH THE LEVITON PRE-TERMINATED FIBER MULTIMODE SYSTEM The Opt-X Unity 40/100G laser optimized multimode (LOMM) system offers an ideal migration
CORNING S EDGE SOLUTIONS FOR DATA CENTERS
INFINITE POSSIBILITIES CORNING S EDGE SOLUTIONS FOR DATA CENTERS Getting a Data Center Up and Running is No Small Task. Keeping a data center fully optimized, eliminating latency, reducing downtime, maintaining
Plug & Play Universal Systems
100G Ready performance Maximum skew of 0.75 ns Product is assured to work in parallel optic applications for Ethernet, Fibre Channel and InfiniBand MTP /LC Duplex Module TRAINING SPLICE EQUIPMENT High-density
DATA CENTER SYMPOSIUM
DATA CENTER SYMPOSIUM Dynamic Changes in Data Center Optic Transmissions & The Impact to Structured Fiber Cabling Rick Dallmann CABLExpress Years of Experience CABLExpress is a manufacturer of custom built
Cabling Solutions for Nexus 9000 Switches With Dual-Rate 40/100G BiDi Transceiver and Panduit Connectivity
Cabling Solutions for Nexus 9000 Switches With Dual-Rate 40/100G BiDi Transceiver and Panduit Connectivity Introduction Virtualization and cloud technologies have applied an incredible amount of pressure
DATA CENTER SOLUTIONS
DATA CENTER SOLUTIONS MTP Cabling Solutions MTP Cassette Solutions MTP Distribution Center Solutions Aqua 10 (OM3) Gigabit Patchcords Tera Flow Single Mode Bend Insensitive Patchcords Fiber Optic Taps
Trends in Testing Data Center Infrastructure. Ed Gastle VIAVI Solutions
Trends in Testing Data Center Infrastructure Ed Gastle VIAVI Solutions Agenda INTRODUCTION Modern Data Center Architecture Historically Enterprise has been a 3 tier topology Core, Aggregation, Access Cloud
Outstanding MTP cabling efficiency for your data center PreCONNECT OCTO: Less fibers, more performance. OPTICAL SOLUTIONS & INFRASTRUCTURE
Outstanding MTP cabling efficiency for your data center : Less fibers, more performance. OPTICAL SOLUTIONS & INFRASTRUCTURE Digitalization is confronting organizations and companies with significant challenges,
Arista 7300X and 7250X Series: Q&A
Arista 7300X and 7250X Series: Q&A Product Overview What are the 7300X and 7250X Family? The Arista 7300X Series are purpose built 10/40GbE data center modular switches in a new category called Spline
Plug & Play Universal Harness, SMF-28 Ultra Single-mode (OS2)
Plug & Play Universal Systems Harnesses have a pinned (male) MTP connector on one end that connects to a Plug & Play Universal Systems trunk or extender trunk, while the other end is equipped with single
ARISTA AND LEVITON Technology in the Data Center
Visit: www.leviton.com/aristanetworks ARISTA AND LEVITON Technology in the Data Center Customer Support: 1-408-547-5502 1-866-476-0000 Product Inquiries: 1-408-547-5501 1-866-497-0000 General Inquiries:
Structured Cabling Design for Large IT/Service Provider Data Centers
Structured Cabling Design for Large IT/Service Provider Data Centers Author: Dave Kozischek, Marketing Applications Manager, Data Center and In-Building Networks Introduction Structured cabling is defined
Enabling Rapid Multitenant Data Centre (MTDC) Connections
Enabling Rapid Multitenant Data Centre (MTDC) Connections At Corning, we understand the challenges associated with outsourced facilities, whether you re an MTDC/ cloud provider or an enterprise client.
Perle Gigabit Media Converter Module. Installation Guide P/N
Perle Gigabit Media Converter Module Installation Guide Unmanaged Managed C-1000-M2SC05 C-1000-M2LC05 C-1000-S2LC10 C-1000-S2SC10 C-1000-S2LC40 C-1000-S2SC70 C-1000-S2LC70 C-1000-S1SC10U C-1000-S1SC10D
F5 Platforms: Accessories MAN
F5 Platforms: Accessories MAN-0557-07 Table of Contents Table of Contents Transceiver Modules...5 Copper SFP modules...5 SKU: F5-UPG-SFPC-R (OPT-0051-xx/OPT-0015-xx)...5 Fiber SFP modules...6 SKU: F5-UPG-SFP-R
PRE-TERMINATED SOLUTION GUIDE
PRE-TERMINATED SOLUTION GUIDE About A global leader in fiber optic technology, AFL Hyperscale brings together over 70 years of design and manufacturing expertise to create next generation, end to end
Choosing MPO Connectors for the Data Center. Ken Hall, RCDD, NTS Data Center Architect CommScope
Choosing MPO Connectors for the Data Center Ken Hall, RCDD, NTS Data Center Architect CommScope Agenda Network Architecture changes Data Center & MPO Standards Application comparisons Additional considerations
Sensus High-Density Panels for Aggregation and Breakout
Specifications Chassis Specifications Weight Rack Mounting Slots Dimensions (H/W/D) 4.15 lbs Fits 19, 21 and 23 racks 3 (2 patching modules, 1 management module) 3.45 x 17.44 x 8.67 (8.67 cm x 44.30 cm
Cisco 100GBASE QSFP-100G Modules
Data Sheet Cisco 100GBASE QSFP-100G Modules Product Overview The Cisco 100GBASE Quad Small Form-Factor Pluggable (QSFP) portfolio offers customers a wide variety of high-density and low-power 100 Gigabit
Sensus. Sensus High-Density Panels for Aggregation and Breakout
Sensus High-Density Panels for Aggregation and Breakout Mountain s Sensus intelligent panels aggregate and break out fiber connectivity from duplex LC cables to high density 8-fiber, 12- fiber and 24-fiber
MEDIA CONVERTERS AND CHASSIS
DATA SHEET LHC210A, LHC211A, LHC212A, LGC210A, LGC211A, LGC212A, LHGC-RACK, LGC215A,.LGC220A MEDIA CONVERTERS AND CHASSIS 24/7 TECHNICAL SUPPORT AT 877.877.2269 OR VISIT BLACKBOX.COM OVERVIEW MEDIA CONVERTERS
Are Conflicts in Data Center Fiber Optic Structured Cabling Standards Putting Your Organization at Risk?
Are Conflicts in Data Center Fiber Optic Structured Cabling Standards Putting Your Organization at Risk? Rick Dallmann Senior Data Center Infrastructure Architect CABLExpress 36 Years of Experience CABLExpress
Cisco 100GBASE QSFP-100G Modules
Data Sheet Cisco 100GBASE QSFP-100G Modules Product Overview The Cisco 100GBASE Quad Small Form-Factor Pluggable (QSFP) portfolio offers customers a wide variety of high-density and low-power 100 Gigabit
Arista 7160 series: Q&A
Arista 7160 series: Q&A Product Overview What are the 7160 Series? Highly dynamic cloud data center networks continue to evolve with the introduction of new protocols and server technologies such as containers
F5 Platforms: Accessories MAN
F5 Platforms: Accessories MAN-0557-06 Table of Contents Table of Contents Transceiver Modules...5 Copper SFP modules...5 SKU: F5-UPG-SFPC-R (OPT-0015-00)...5 Fiber XFP modules...6 SKU: F5-UPG-XFP-R (no
FAS-NET MPO Solution. Benefits of FAS-NET MPO Fiber Optic Solution:
Stable and Reliable Data Communication Solutions from Infinique Infinique has designed and developed quality product with affordable pricing for communication infrastructure solutions. This position has
Port Mapping the Cisco Nexus 9K Switch
February 2018 Port Mapping the Cisco Nexus 9K Switch Mapping 36 Port Spine Blades to a Centralized Patching Location with the HD Flex Fiber Cabling System Introduction Customers seek to leverage the Cisco*
IXIA FLEX TAP TM DATA SHEET PASSIVE NETWORK MONITORING KEY FEATURES HIGHLIGHTS
IXIA FLEX TAP TM DATA SHEET PASSIVE NETWORK MONITORING The Ixia Flex Tap provide reliable continuous visibility of 100% of network traffic to support performance and security with no network performance
2016 Enterprise Networks EMEA CORE PRODUCTS. for Data Centre Networks
2016 Enterprise Networks EMEA CORE PRODUCTS for Data Centre Networks Data Centres Data Centre Products Quality Innovation As a leader in data centre technology and innovation, we understand the unique
Data Center: First-Time Right Acceptance Testing Steps for Certification and Troubleshooting - Intra & Inter-connect. Nicholas Gagnon EXFO
Data Center: First-Time Right Acceptance Testing Steps for Certification and Troubleshooting - Intra & Inter-connect Nicholas Gagnon EXFO Data Center today Source: EXFO Global Data Center Traffic by Destination
ExtremeSwitching TM. 100Gb Ethernet QSFP28 Transceivers and Cables. Product Overview. Data Sheet. Highlights. 100Gb Ethernet QSFP28 SR4 MMF
Data Sheet Highlights Compact Quad Small Form-factor Pluggable (QSFP28) products for high density 100Gb Ethernet applications Hot swappable, field serviceable modular interfaces for Extreme Networks switches
Ixia Net Optics Flex Tap TM
Ixia Net Optics Flex Tap TM Key Features The Ixia Net Optics Flex Tap family delivers total traffic visibility for network monitoring and security tools. Deploying these network taps on any network link
Optical Trends in the Data Center. Doug Coleman Manager, Technology & Standards Distinguished Associate Corning Optical Communications
Optical Trends in the Data Center Doug Coleman Manager, Technology & Standards Distinguished Associate Corning Optical Communications Telecom 2017 Corning Restricted Incorporated 2 Server Access Switch
GigaVUE-420 Specifications
Mgmnt Console M/S Rdy Pwr 1 2 3 4 N(a) NETWORK N(b) INLINE TOOL T(a) T(b) GigaLINK-Cu GigaLINK-SR GigaLINK-ER GigaVUE-420 Specifications Gigamon Systems Giga PORT Giga TAP-Tx Giga TAP-Sx Split Ratio :70/30
Data Center & Cloud Computing Infrastruture Solutions DATASHEET. MTP/MPO-LC Breakout Cable Aseemblies High Density Cabling System
Data Center & Cloud Computing Infrastruture Solutions DATASHEET MTP/MPO-LC Breakout Cable Aseemblies High Density Cabling System REV.2.0 2018 MTP/MPO Breakout Cable 01 Description MTP/MPO breakout assemblies
HPE FlexNetwork Tbps Fabric with 8-port 1/10GbE SFP+ and 2-port 40GbE QSFP+ Main Processing Unit - LSQM1SRP8X2QE0 (JH209A, JH217A)
HPE FlexNetwork 7500 2.4Tbps Fabric with 8-port 1/10GbE SFP+ and 2-port 40GbE QSFP+ Main Processing Unit - LSQM1SRP8X2QE0 (JH209A, JH217A) 1 Card identifier The card identifier LSQM1SRP8X2QE0 is at the
Testing Parallel Optics
White Paper Testing Parallel Optics Author: Ed Gastle VIAVI Solutions To accommodate the relentless need for speed, driven by mobile devices, watching videos online and uploading and sharing content, network
The interface ports are selectively enabled based on their functions in the system management versus non-management.
This chapter describes how to cable the interface ports on Management I/O (MIO) or Management I/O Universal (UMIO) cards. It includes the following sections: Interface Ports, page Port Status LEDs, page
MTP/MPO SOLUTIONS FIBERTRONICS. General Applications & Loss Specifications
MTP/MPO SOLUTIONS FIBERTRONICS Multifiber Push-On (MPO) connectors have answered the call for more bandwidth and more space efficiency. MPO connectors are able to provide up to 24 or more fibers in a single
Fiber Optic Cabling Systems for High Performance Applications
Fiber Optic Cabling Systems for High Performance Applications BICSI Conference Bangkok, Thailand 17-18 November 2016 Nicholas Yeo, RCDD/NTS/DCDC Data Center Trends Computing evolution Cloud computing Servers
DATA CENTER SOLUTIONS TM. Fiber Flex
DATA CENTER SOLUTIONS TM Fiber Flex We help reach your mission-critical objectives!! Olabs develops superior products and solutions in close collaboration with our customers. Our fiber optic structured
Arista 7280E Series: Q&A
Arista 7280E Series: Q&A Product Overview What are the 7280E Series? The 7280E are a series of purpose built fixed configuration 1RU form factor switches designed with deep buffers, virtual output queues,
Are you Ready for 40G and 100G?
White Paper Are you Ready for 40G and 100G? 12- vs. 24-fiber MTP cabling for higher-speed Ethernet Gary Bernstein, RCDD Director of Product Management Fiber and Data Center Leviton Network Solutions Abstract
Sector A Sector B Sector C Headend/MDF IDF/TR Zone Area Headend/MDF Vertical IDF/TR Horizontal Zone Area Headend/MDF Vertical IDF/TR Horizontal Zone Area Headend/MDF Vertical IDF/TR Horizontal Zone Area
Pluggable Transceivers Industry standard Pluggable Transceivers and Direct Attach Cables
DATASHEET Pluggable Transceivers Industry standard Pluggable Transceivers and Direct Attach Cables Product Overview Modular Ethernet interfaces from 100Mbps to 40Gbps Support for a large variety of cable
DENSIFICATION DATA CENTER JULY 2018 FOR PROFESSIONALS MANAGING THE CABLE AND WIRELESS SYSTEMS THAT ENABLE CRITICAL COMMUNICATIONS DESIGN TECHNOLOGY
JULY 2018 FOR PROFESSIONALS MANAGING THE CABLE AND WIRELESS SYSTEMS THAT ENABLE CRITICAL COMMUNICATIONS DATA CENTER DENSIFICATION DESIGN PAGE 11 Why 5G needs fiber TECHNOLOGY PAGE 18 IoT is the problem
Cisco 40GBASE QSFP Modules
Data Sheet Cisco 40GBASE QSFP Modules Product Overview The Cisco 40GBASE QSFP (Quad Small Form-Factor Pluggable) portfolio offers customers a wide variety of high-density and low-power 40 Gigabit Ethernet
PREPARING FOR FUTURE STRUCTURED CABLING REQUIREMENTS IN THE DATA CENTER: 40/100 GIGABIT ETHERNET AND BEYOND
PREPARING FOR FUTURE STRUCTURED CABLING REQUIREMENTS IN THE DATA CENTER: 40/100 GIGABIT ETHERNET AND BEYOND Cindy Montstream, RCDD/NTS, EE, CPLP Director of elearning and Standards DATA COMMUNICATIONS
Data Center Optical Connectivity with Bend-Optimized OM3/OM4 Multimode Optical Fiber
Data Center Optical Connectivity with Bend-Optimized OM3/OM4 Multimode Optical Fiber Doug Coleman Corning Cable Systems Manager, Technology & Standards Data Center Environment Data Center Environment Higher
PreCONNECT BREAKOUT PRODUCT INFORMATION
PreCONNECT BREAKOUT PRODUCT INFORMATION PreCONNECT BREAKOUT Trunk Highly modular SMAP-G2 19 Distribution Panels Classical 19 1 and 2 HU Distribution Panels, fixed installation and telescopic complete pullout
Data Center Connectivity
Data Center Connectivity Active Optical Cable 40G QSFP+ to QSFP+ Full Duplex 4 Channel 850nm Parallel Active Optical Cable Cable Length:1m/2m/5m/10m/20m/30m/50m Low power consumption: less than 1.5 W per
EDGE Solutions Hybrid Trunk, OM4, Low- Loss, MTP to LC Duplex Uniboot, 24 fibres
EDGE MTP trunks are preterminated cables with 12 -fibre MTP connectors or LC duplex connectors on either side. The trunks build up the major skeleton of the passive network infrastructure, and thanks to
HPE FlexNetwork port 10GbE SFP/SFP+/4-port 40GbE QSFP+ M2SG Module - LSUM2TGS32QSSG0(JH432A)
HPE FlexNetwork 10500 32-port 10GbE SFP/SFP+/4-port 40GbE QSFP+ M2SG Module - LSUM2TGS32QSSG0(JH432A) 1 Card identifier The card identifier LSUM2TGS32QSSG0 is at the upper right corner of the front panel.