Operating Instructions

Transcription

1 Operating Instructions AV Control Receiver Model No. SA-BX500 Dear customer Thank you for purchasing this product. Before connecting, operating or adjusting this product, please read the instructions completely. Please keep this manual for future reference. EB on the packaging indicates the United Kingdom. EB EG GN -1B

2 Enjoying the Home Theater has become easy! A B Connections Until now... Many different cables were necessary. With SA-BX500! Simple connections using 2 HDMI cables and 1 stereo phono cable! Other connections are also possible. Until now... We must make speaker settings... Settings Manual setting for each speaker. It s difficult. With SA-BX500! Automatic speaker setup leads you to the easiest way of speakers setting ( pages 24, 25). VIERA ink Previous Home Theater systems required multiple operations. When you connect the unit to your TV (VIERA) and DVD recorder (DIGA) compatible with VIERA ink Press just one button and enjoy the Home Theater ( pages 32, 33). The Home Theater begins. One-touch playback. Enjoy the full surround sound from all speakers connected!! How can we enjoy TV with surround sound? Connections and settings are all complete. TV outputs 2-channel stereo sounds and only front speakers can make audio output. Just press SURROUND on the unit on the remote control to enjoy surround sound ( pages 28, 29). Great!! We can enjoy TV with surround sound. 2

3 Table of contents Before use Enjoying the Home Theater has become easy!... 2 Caution for AC Mains ead... 4 Safety precautions... 5 Supplied accessories... 6 Control guide... 6 Quick guide Step 1 Placing speakers... 9 Step 2 Connecting speakers Step 3 Connecting a TV and a Blu-ray Disc/DVD player Step 4 Watching TV or DVD Preparations Connections Basic connections Connecting cables to video and audio terminals (Connecting equipment without HDMI terminal) Connecting equipment with HDMI terminal Connecting cables to S video and audio terminals Connecting cables to component and audio terminals Other connections To enjoy analogue sounds To enjoy high-quality analogue sounds (Analogue 8-channel connections) To connect the unit to a CD player To connect the unit for audio or picture recording To connect the unit to a video camera etc Connecting other speakers To connect bi-wire speakers To connect a second pair of front speakers (SPEAKERS B) To enjoy wireless audio with SH-FX Connecting antennas Auto speaker setup using the setup microphone Basic operations Enjoying the Home Theater Basic playback Using surround speakers wirelessly with SH-FX To enjoy 7.1 channel playback using 2 sets of SH-FX When you use wireless speakers in another room (MUTI ROOM) Using SPEAKERS B Playback when making analogue 8-channel connections Enjoying only with TV speaker Enjoying 7.1-channel virtual surround playback Operations istening to surround sound Dolby Pro ogic NEO: SFC (Sound Field Control) Sound fi eld Remote controlling sound effects Adjusting Dolby Pro ogic s MUSIC mode Adjusting NEO:6 s MUSIC mode Convenient functions Adjusting speaker volumes Silencing speakers temporarily Displaying the current status Using the VIERA ink HDAVI Control TM Enjoying the Home Theater through one-touch operations Using the sound menu Adjusting the speaker level Adjusting the bass Adjusting the treble Balancing front speaker volume Changing the audio output (Dual programme) istening clearly at low volume Using whisper mode surround Using the setup menu Basic operation Adjusting the brightness of the display Using sleep timer Setting speakers and their sizes Setting distances Setting the lowpass filter Changing auto speaker settings To return speakers to factory settings Setting the unit against automatic polarity adjustment Adjusting the high-frequency sound quality of the set frequency response Making bi-wire setting Setting the speaker impedance Changing the input settings Setting the placement positions for surround speakers Setting wireless speakers Setting input signals Adjusting input levels for external terminals Reducing standby power consumption (power save mode) Setting VIERA ink to OFF Switching the attenuator Adjusting the time lag by delaying audio output when pictures on TV arrives after sounds Changing the volume display Reset (factory settings) Using headphones Recording Remote controlling a TV or DVD recorder etc Remote controlling a TV, cable box and satellite receiver Using two or more Panasonic equipment (a mini component system, an AV amp etc.) Remote controlling a DVD recorder Remote controlling a Blu-ray Disc/DVD player Entering a code to operate other equipment Enjoying the Radio Preset tuning Auto presetting Manual presetting istening to preset stations (using the remote control) Manual tuning Tuning directly using the numbered buttons Using the unit Using the remote control Reducing excessive noise AM allocation RDS broadcasts Changing the display PTY displays Playing an ipod on this unit Playing a music recorded on ipod Reference Other information Glossary Specifications Error messages Troubleshooting guide Maintenance Enjoying the Home Theater has become easy!/table of contents Before use 3

4 Caution for AC Mains ead (For the United Kingdom and Republic of Ireland) ( EB area code model only) For your safety, please read the following text carefully. This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 5-ampere fuse is fi tted in this plug. Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 5-ampere and that it is approved by ASTA or BSI to BS1362. Check for the ASTA mark or the BSI mark on the body of the fuse. If the plug contains a removable fuse cover you must ensure that it is refi tted when the fuse is replaced. If you lose the fuse cover the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be purchased from your local dealer. CAUTION! IF THE FITTED MOUDED PUG IS UNSUITABE FOR THE SOCKET ET IN YOUR HOME THEN THE FUSE SHOUD BE REMOVED AND THE PUG CUT OFF AND DISPOSED OF SAFEY. THERE IS A DANGER OF SEVERE EECTRICA SHOCK IF THE CUT OFF PUG IS INSERTED INTO ANY 13-AMPERE SOCKET. If a new plug is to be fi tted please observe the wiring code as stated below. If in any doubt please consult a qualifi ed electrician. WARNING: DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINA WHICH IS MARKED WITH THE ETTER E, BY THE EARTH SYMBO OR COOURED GREEN OR GREEN/ YEOW. THIS PUG IS NOT WATERPROOF KEEP DRY. Before use Remove the connector cover. How to replace the fuse The location of the fuse differ according to the type of AC mains plug (fi gures A and B). Confi rm the AC mains plug fi tted and follow the instructions below. Illustrations may differ from actual AC mains plug. 1. Open the fuse cover with a screwdriver. Figure A Figure B Fuse cover IMPORTANT The wires in this mains lead are coloured in accordance with the following code: Blue: Neutral, Brown: ive. As these colours may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured Blue must be connected to the terminal which is marked with the letter N or coloured Black or Blue. The wire which is coloured Brown must be connected to the terminal which is marked with the letter or coloured Brown or Red. 2. Replace the fuse and close or attach the fuse cover. Figure A Figure B Fuse (5 ampere) Fuse (5 ampere) 4

5 Safety precautions Placement Set the unit up on an even surface away from direct sunlight, high temperatures, high humidity, and excessive vibration. These conditions can damage the cabinet and other components, thereby shortening the unit s service life. Do not place heavy items on the unit. Voltage Do not use high voltage power sources. This can overload the unit and cause a fi re. Do not use a DC power source. Check the source carefully when setting the unit up on a ship or other place where DC is used. AC mains lead protection Ensure the AC mains lead is connected correctly and not damaged. Poor connection and lead damage can cause fi re or electric shock. Do not pull, bend, or place heavy items on the lead. Grasp the plug fi rmly when unplugging the lead. Pulling the AC mains lead can cause electric shock. Do not handle the plug with wet hands. This can cause electric shock. Foreign matter Do not let metal objects fall inside the unit. This can cause electric shock or malfunction. Do not let liquids get into the unit. This can cause electric shock or malfunction. If this occurs, immediately disconnect the unit from the AC mains supply and contact your dealer. Do not spray insecticides onto or into the unit. They contain fl ammable gases which can ignite if sprayed into the unit. Service Do not attempt to repair this unit by yourself. If sound is interrupted, indicators fail to light, smoke appears, or any other problem that is not covered in these instructions occurs, disconnect the AC mains lead and contact your dealer or an authorised service centre. Electric shock or damage to the unit can occur if the unit is repaired, disassembled or reconstructed by unqualified persons. Extend operating life by disconnecting the unit from the AC mains if it is not to be used for a long time. Caution for AC Mains ead/safety precautions Before use 5

6 MUTI CH PROCESSING TrueHD D+ DTS-HD MUTI CH PCM BI-AMP WIREESS READY SURROUND M.ROOM Supplied accessories Please check and identify the supplied accessories. 1 AC mains lead For continental Europe For the United Kingdom and Republic of Ireland For Australia and New Zealand 1 Setup microphone (0CBAB000128) 2 Batteries 1 Remote control (N2QAKB000070) (K2CQ2CA00007) 1 FM indoor antenna (RSA0007-M) 1 AM loop antenna (N1DAAAA00002) Control guide This unit (K2CT3CA00004) Sales and Support Information (For the United Kingdom and Republic of Ireland) (K2CJ2DA00010) 1 Antenna plug adapter For the United Kingdom and Republic of Ireland (K1YZ ) Customer Care Centre For customers within the UK: For customers within the Republic of Ireland: Visit our website for product information customer.care@panasonic.co.uk Direct Sales at Panasonic UK For customers: Order accessory and consumable items for your product with ease and confi dence by phoning our Customer Care Centre Monday-Thursday 9:00am-5:30pm, Friday 9:30am-5:30pm (Excluding public holidays). 1 Front terminal cover (RGK2137-K) Use numbers indicated in parentheses when asking for replacement parts. (Product numbers correct as of May These may be subject to change.) Or go on line through our Internet Accessory ordering application at Most major credit and debit cards accepted. All enquiries transactions and distribution facilities are provided directly by Panasonic UK td. It couldn t be simpler! Also available through our Internet is direct shopping for a wide range of fi nished products, take a browse on our website for further details. Interested in purchasing an extended guarantee? Please call or visit our website ights on when playing a disc using multi-channel PCM format ights on when playing a disc using high definition audio format such as Blu-ray Disc ights on when the following multichannel playback settings are used When playing multi-channel sources When using surround effects for twochannel sources, etc. Standby indicator [^] When the unit is connected to the AC mains supply, this indicator lights up in standby mode and goes out when the unit is turned on. Standby/on switch [8] Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power. For connecting headphones ( page 41) For connecting the setup microphone ( page 24) For connecting a video camera etc. ( page 21) SETUP MIC SURROUND SPEAKERS A SPEAKERS B AUX S VIDEO VIDEO - AUDIO - R ights on when BI-AMP is on ( page 51) For switching the surround playback on and off (The indicator lights up when the surround playback is on.) ( page 29) ights up under the condition that using the digital transmitter (SH-FX67) is possible INPUT SEECTOR AUTO SPEAKER SETUP RETURN -SETUP OK _ TUNE VOUME + For selecting input sources ( pages 15, 26 and 41) For adjusting volumes ( pages 15, 26 and 41) For tuning the radio ( page 47) For SETUP operations ( page 36) ights on during the auto speaker setup ( page 24) For selecting front speakers ( pages 24, 26 and 27) Display 6 ights on when 2-channel mix is functioning ( pages 27, 41 and 51) 2CH MIX SPEAKERS BI-WIRE A B TUNED Displays front speakers in use ( pages 15, 24, 26 and 27) Radio display ights on when sleep Unit display ights on when PCM FIX is selected ( page 39) timer is set ( page 37) MONO ST RDS PS PTY General display M SEEP m khz MHz DIGITA INPUT PCM DTS 96/24DTS-ES DIGITA EX EX Frequency unit indicators ights on when the corresponding digital source is input ( page 50)

7 DTS-HD SPEAKERS A MUTI CH PCM BI-AMP SPEAKERS B AUX S VIDEO VIDEO - AUDIO - R WIREESS READY SURROUND M.ROOM INPUT SEECTOR AUTO SPEAKER SETUP RETURN -SETUP OK _ TUNE VOUME + Rear Panel Speaker terminal ( pages 10, 11 and 22) HDMI terminal ( pages 13, 17 and 32) S video terminal ( pages 18 and 21) R FRONT A FRONT FRONT B B CENTER SURROUND SURROUND BACK BACK CENTER F HF BI-WIRE R R R A OR B / BI-WIRE (4-16 Ω EACH SPEAKER) A AND B (6-16 Ω EACH SPEAKER) AC IN~ AC inlet ( pages 12 and 13) SPEAKERS Exhaust hole (Cooling fan) Remote control Power button For selecting input sources ( pages 26 and 41) For switching FM or AM ( pages 46 and 47) For inputting channels TV, cable box and satellite receiver ( page 42) DVD recorder ( page 43) Radio ( page 46) For selecting a track or chapter DVD recorder ( page 43) Blu-ray Disc/DVD player ( page 44) For inputting frequencies ( page 47) For confirming speaker output ( page 14)/For auto speaker setup ( pages 24 and 25)/For adjusting speaker level ( page 31) For listening to surround sounds ( pages 28 to 30) (6-16 Ω EACH SPEAKER) Component terminal ( page 19) INPUT SEECTOR DIRECT TUNING DISC DIRECT NAVIGATOR TOPMENU AV SYSTEM 0 SEARCH/SOW T ONE TO TV FM/AM CABE SAT -/-- DRIVE SEECT SKIP UCH PA AY ONE TOUCH PAY OPTION PORT SETUP R Y PB PR IN IN IN (DVD RECORDER) (BD/DVD PAYER) (CABE/SAT) HDMI 1 HDMI 2 HDMI 3 COMPONENT VIDEO AUDIO S VIDEO BD/ IN IN IN IN IN TV MONITOR DVD PAYER DVD RECORDER VCR CABE/SAT GAME VIDEO IN (BD/ IN IN BD/ IN IN IN IN IN TV MONITOR (DVD RECORDER) DVD PAYER) (CABE/SAT) TV MONITOR DVD PAYER DVD RECORDER VCR CABE/SAT GAME CENTER IN SUBWOOFER SURROUND BACK SURROUND FRONT IN IN IN IN IN CD BD/DVD PAYER / ANAOG 8CH IN DVD RECORDER VCR CABE/SAT GAME TV RECORDER DVD PAYER BD/DVD ANAOG 8CH CH VO MUTING STOP PAUSE PAY OPTION OK FUNCTIONS RETURN SURROUND AUTO SOUND TV OFF TEST MENU NEO : 6 DISPAY VO SFC MUSIC MOVIE TV/AV Video terminal ( pages 12, 16 and 21) For switching an input source on and off/ Source switching/ Switching remote control modes ( pages 42 to 45) For playing 8 channels sources ( page 27) For selecting a channel TV, cable box and satellite receiver ( page 42) DVD recorder ( page 43) Radio ( page 46) For adjusting volumes ( pages 14, 15, 26 and 41) For silencing speakers temporarily ( page 31) For operating other equipment ( pages 33 and 42 to 44) For operating SOUND MENU ( pages 34 and 35)/SETUP ( page 36) For selecting SOUND MENU ( pages 34 and 35) For operating a TV ( page 42) For changing the display ( pages 31 and 48) For playing an ipod ( page 49)/For entering SETUP menu items ( page 36) (DVD RECORDER) (BD/DVD PAYER) (TV) (CD) OPTICA 1 OPTICA 2 OPTICA COAXIA 3 DIGITA IN DC 5V 500mA MAX OPTION V 1 SUBWOOFER Audio terminal ( pages 11, 12, 13, 16 and 18 to 21) OOP ANT GND 75 Ω OOP EXT FM ANT AM ANT Antenna terminal ( page 23) Batteries Press on the tab to open. Place this side in before the other side when you close. Digital input terminal ( pages 16, 18, 19, 20 and 32) Option port terminal ( page 49) (R6/R6, AA) Insert so the poles (( and )) match those in the remote control. Do not use rechargeable type batteries. Do not heat or expose to fl ame. Do not leave the batteries in an automobile exposed to direct sunlight for a long period of time with doors and windows closed. Use Remote control signal sensor Digital transmitter terminal ( page 23) About 7 meters or less when you sit directly in front of the signal sensor (Exact distance depends on angles). Transmission window Caution Do not place an object between the signal sensor and the remote control. Do not place the signal sensor under direct sunlight or the strong light of an inverter fl uorescent lamp. Keep the transmission window and the unit s sensor free from dust. When you set the unit in a cabinet The remote controlling range may decrease depending on the thickness or colours of glass cabinet doors. Supplied accessories/control guide Before use 7

8 Quick guide This section guides you through the easiest and simplest way to setup the Home Theater. Refer to the steps indicated below. The steps 1 to 4 indicate the method one by one from when you purchase the unit until you can enjoy the Home Theater. Turn off all equipment before making any connections. Peripheral equipment sold separately unless otherwise indicated. To connect equipment, refer to the appropriate operating instructions. Step 1 Placing speakers ( page 9) You can enjoy the best quality of sounds by setting speakers properly. Step 2 Connecting speakers ( pages 10 to 11) You can install and connect speakers in 7.1ch setting. Step 3 Connecting a TV and a Blu-ray Disc/DVD player ( pages 12 to 13) You can easily enjoy high-quality pictures and sounds. Step 4 Watching TV or DVD ( pages 14 to 15) You can enjoy TV and DVD with surround sound. 8

9 Step 1 Placing speakers 5.1, 6.1, 7.1 etc. channel playback is possible on this unit. This page introduces speaker settings for 7.1 channel playback. The ideal placement is to set each speaker (excluding the subwoofer) the same distance away from the listening-viewing position. Measure the actual distance from each of the connected speakers to the listening-viewing position and perform steps instructed in Setting distances ( page 37) or perform steps instructed in Auto speaker setup using the setup microphone ( pages 24 and 25) when you cannot install speakers the same distance away. Example: Front speakers (2), center speaker (1), surround speakers (2), surround back speakers (2) and subwoofer (1) A H in the illustration below correspond to A H in Connecting speakers ( pages 10 and 11). B Front speaker (left) C Center speaker A Front speaker (right) D Surround speaker (right) Quick guide Placing speakers H Active subwoofer F Surround back speaker (right) E Surround speaker (left) G Surround back speaker (left) Front speakers ( A right, B left) Place on the left and right of the TV at seated ear height so that there is good coherency between the picture and sound. C Center speaker Place underneath or above the center of the TV. When you do not install the center speaker, sound assigned to it is distributed to front speakers and output from them. Surround speakers ( D right, E left) Place on the side of or slightly behind the listening-viewing position. When you do not install surround speakers, sound assigned to them is distributed to front speakers and output from them. Surround back speakers ( F right, G left) Place behind the listening-viewing position, about 1 meter higher than ear level. When you do not install any surround back speaker, sound assigned to them is distributed to surround speakers or front speakers and output from them. H Active subwoofer The active subwoofer can be placed in any position as long as it is at a reasonable distance from the TV. Aim front faces of all speakers at the listening-viewing position for setting. 9

10 CO Step 2 Connecting speakers 1 Remove the vinyl covering the tips of speaker cables by twisting it off. 2 How to connect speaker cables Speaker terminals Connect speaker cables properly to terminals after making sure left and right, and ( and ). Improper connections may cause the unit to develop problems. Do not short-circuit speaker cables. The action may damage circuits. A Front speaker (right) B Front speaker (left) C Center speaker FRONT A F R BI-WIRE CENTER CENTER Rear panel FRONT FRONT B FRONT A B CENTER SURROUND SURROUND BACK BACK CENTER F HF BI-WIRE R R R R Y A OR B / BI-WIRE (4-16 Ω EACH SPEAKER) A AND B (6-16 Ω EACH SPEAKER) SPEAKERS (6-16 Ω EACH SPEAKER) PB Speaker impedance Front A: 4 to 16 Ω Center: 6 to 16 Ω Surround: 6 to 16 Ω Surround back: 6 to 16 Ω AC IN~ PR IN (BD/ TV MONITOR (DVD RECORDER) DVD 1 CE R IN SUB CD 10 Do not forget to take steps instructed in Auto speaker setup using the setup microphone ( pages 24 and 25) after connecting a new speaker. When connecting speakers with the impedance of 4 Ω, make sure to set 4 OHMS in Setting the speaker impedance on page 38.

11 Connection cable Speaker cable (not included) Monaural connection cable (not included) Quick guide D Surround speaker (right) E Surround speaker (left) Use the terminal for the left surround back speaker when you place the speakers for 6.1 channel playback. F Surround back speaker (right) G Surround back speaker (left) Connecting speakers SURROUND SURROUND BACK BACK R R IN IN IN H Active subwoofer (DVD RECORDER) (BD/DVD PAYER) (CABE/SAT) HDMI 1 HDMI 2 HDMI 3 MPONENT VIDEO S VIDEO BD/ IN IN IN IN IN TV MONITOR DVD PAYER DVD RECORDER VCR CABE/SAT GAME VIDEO IN IN BD/ IN IN IN IN IN PAYER) (CABE/SAT) TV MONITOR DVD PAYER DVD RECORDER VCR CABE/SAT GAME 2 3 (DVD RECORDER) (BD/DVD PAYER) (TV) (CD) OPTICA 1 OPTICA 2 OPTICA COAXIA 3 DIGITA IN FM ANT NTER AUDIO DC 5V 500mA MAX OPTION V 1 75 Ω OOP WOOFER SURROUND BACK SURROUND FRONT IN IN IN IN IN BD/DVD PAYER / ANAOG 8CH IN DVD RECORDER VCR CABE/SAT GAME TV SUBWOOFER OOP ANT EXT GND AM ANT SUBWOOFER 11

12 Step 3 Connecting a TV and a Blu-ray Disc/ DVD player Connecting equipment in the basic way Connection cable Audio cable Video cable Video and Audio cable Stereo phono cable (not included) Video connection cable (not included) 21-pin scart cable (not included) White () Red (R) When you make HDMI connections, this connection is not necessary. Use when connecting equipment with a 21-pin scart terminal. TV Audio out (R) () You need a stereo phono cable for enjoying TV with surround sound. To enjoy TV with a digital sound output make connection B instructed in page 16. VIDEO IN AV Rear panel FRONT A FRONT FRONT B B CENTER CENTER SURROUND SURROUND BACK BACK F HF BI-WIRE R R R R IN IN IN (DVD RECORDER) (BD/DVD PAYER) (CABE/SAT) HDMI 1 HDMI 2 HDMI 3 COMPONENT VIDEO S VIDEO Y A OR B / BI-WIRE (4-16 Ω EACH SPEAKER) A AND B (6-16 Ω EACH SPEAKER) SPEAKERS (6-16 Ω EACH SPEAKER) PB BD/ IN IN IN IN IN TV MONITOR DVD PAYER DVD RECORDER VCR CABE/SAT GAME VIDEO PR IN (BD/ IN IN BD/ IN IN IN IN IN TV MONITOR (DVD RECORDER) DVD PAYER) (CABE/SAT) TV MONITOR DVD PAYER DVD RECORDER VCR CABE/SAT GAME (DVD RECORDER) (BD/DVD PAYER) (TV) (CD) OPTICA 1 OPTICA 2 OPTICA COAXIA 3 DIGITA IN FM ANT CENTER AUDIO DC 5V 500mA MAX OPTION V 1 75 Ω OOP AC IN~ R IN SUBWOOFER SURROUND BACK SURROUND FRONT IN IN IN IN IN BD/DVD PAYER / ANAOG 8CH IN CD DVD RECORDER VCR CABE/SAT GAME TV SUBWOOFER OOP ANT EXT GND AM ANT AC mains lead (included) Household mains socket (AC 220 V to 240 V, 50 Hz) Blu-ray Disc/DVD player (R) () Audio out VIDEO s on AC mains lead Connect AC mains lead after all other cables and cords are connected. The included AC mains lead is for use with this unit only. Do not use it with other equipment. Do not use an AC mains lead from any other type of equipment with this unit. The unit s settings remain effective after the AC mains lead is removed from the household mains socket. FOR THE UNITED KINGDOM AND REPUBIC OF IREAND ONY READ THE CAUTION FOR THE AC MAINS EAD ON PAGE 4 BEFORE CONNECTION. Insertion of connector (Except the United Kingdom and Republic of Ireland) Even when the connector is perfectly inserted, depending on the type of inlet used, the front part of the connector may jut out as shown in the drawing. However there is no problem using the unit. Appliance inlet Connector 12 Approx. 6 mm

13 MUTI CH PROCESSING TrueHD D+ DTS-HD SETUP MIC MUTI CH PCM BI-AMP SURROUND SPEAKERS A SPEAKERS B AUX S VIDEO VIDEO - AUDIO - R WIREESS READY SURROUND M.ROOM INPUT SEECTOR AUTO SPEAKER SETUP RETURN -SETUP OK _ TUNE VOUME + Connecting equipment with HDMI terminal Connection cable Video and Audio cable HDMI cable (not included) (It is recommended that you use Panasonic s HDMI cable.) Recommended part number: RP-CDHG10 (1.0 m), RP-CDHG15 (1.5 m), RP-CDHG20 (2.0 m), RP-CDHG30 (3.0 m), RP-CDHG50 (5.0 m), etc. R FRONT A FRONT FRONT B B CENTER CENTER SURROUND SURROUND BACK BACK F HF BI-WIRE R R R A OR B / BI-WIRE (4-16 Ω EACH SPEAKER) A AND B (6-16 Ω EACH SPEAKER) SPEAKERS HDMI input (6-16 Ω EACH SPEAKER) Y PB PR IN IN IN (DVD RECORDER) (BD/DVD PAYER) (CABE/SAT) HDMI 1 HDMI 2 HDMI 3 COMPONENT VIDEO You need a stereo phono cable for enjoying TV with surround sound. To enjoy TV with a digital sound output make connection B instructed in page 16. S VIDEO BD/ IN IN IN IN IN TV MONITOR DVD PAYER DVD RECORDER VCR CABE/SAT GAME VIDEO IN (BD/ IN IN BD/ IN IN IN IN IN TV MONITOR (DVD RECORDER) DVD PAYER) (CABE/SAT) TV MONITOR DVD PAYER DVD RECORDER VCR CABE/SAT GAME Audio cable Stereo phono cable (not included) (DVD RECORDER) (BD/DVD PAYER) (TV) (CD) OPTICA 1 OPTICA 2 OPTICA COAXIA 3 DIGITA IN FM ANT White () Red (R) This unit incorporates HDMI (V.1.3 with Deep Colour) technology that can reproduce greater colour gradation (4096 steps) when connected to a compatible TV. A lower colour gradation (256 steps), without deep colour, will be reproduced if connected to a TV which does not support deep colour. Please use High Speed HDMI Cables that have the HDMI logo (as shown on the cover). When outputting 1080p signal, please use the HDMI cables 5.0 meters or less. The audio signal transmitted through HDMI takes priority when you use both HDMI and digital terminals for connection ( pages 16, 18 to 20). TV Rear panel Audio out (R) () Quick guide Connecting a TV and a Blu-ray Disc/DVD player CENTER AUDIO DC 5V 500mA MAX OPTION V 1 75 Ω OOP AC IN~ R IN SUBWOOFER SURROUND BACK SURROUND FRONT IN IN IN IN IN VCR GAME TV CD BD/DVD PAYER / ANAOG 8CH IN DVD RECORDER CABE/SAT SUBWOOFER OOP ANT EXT GND AM ANT AC mains lead (included) Household mains socket (AC 220 V to 240 V, 50 Hz) HDMI Video/Audio out Blu-ray Disc/DVD player You can hear DVD sounds, etc. from TV speakers when you turn off the unit connected as shown on this page (standby through function). This convenient function enables you to enjoy DVD etc. without using the unit late at night. SURROUND SURROUND When connection is complete 1. Press to turn the unit on. 2. Press SURROUND to set surround playback. The SURROUND indicator lights on after the setting. You can enjoy 2-channel sources with surround playback. 13

14 MUTI CH PROCESSING TrueHD D+ DTS-HD MUTI CH PCM BI-AMP WIREESS READY SURROUND M.ROOM Step 4 Watching TV or DVD Turn the TV on and switch the TV s input mode (to HDMI and others) SURROUND VOUME INPUT SEECTOR _ + SURROUND SPEAKERS A SPEAKERS B AUTO SPEAKER SETUP RETURN -SETUP OK TUNE SETUP MIC AUX S VIDEO VIDEO - AUDIO - R SURROUND SPEAKERS A Testing speaker output You can confi rm audio output using the test signal. 1. Press to turn the unit on. 2. Press to select an input source other than TV or BD/DVD P.. 3. Press to adjust the volume range between 30dB and 35dB. AUTO 4. Press TEST to test audio output from all connected speakers. Speakers are displayed in the following order. (The test signal is output only when the connected speaker is displayed.) C R RS SBR SB S SUBW When you feel the volume of each speaker is not balanced with the volume of the front speakers, see page 31 to adjust the volume balance of speakers. 5. Press AUTO TEST to stop the test signal. 6. ower the volume to the normal listening level using. 14

15 MUTI CH PROCESSING TrueHD D+ DTS-HD SETUP MIC MUTI CH PCM BI-AMP SURROUND SPEAKERS A SPEAKERS B AUX S VIDEO VIDEO - AUDIO - R WIREESS READY SURROUND M.ROOM INPUT SEECTOR AUTO SPEAKER SETUP RETURN -SETUP OK TUNE VOUME 1 To 2 To 3 Watch 4 To turn the unit on Press select TV or BD/DVD P.. Press or The standby indicator ^ goes off when you turn the unit on. Confi rm if A appears on the display on the unit. If A is not displayed, press [SPEAKERS A]. Check the SURROUND indicator is lighting up. If not, press [SURROUND] on the unit to set surround playback ( pages 13 and 29). TV or DVD You can enjoy the variety of surround effects ( pages 28 to 30). adjust the volume Press Volume range: db (minimum), 79dB to 0dB (maximum) Quick guide Watching TV or DVD To finish watching Be sure to reduce the volume and press [^] to turn the unit to standby. Operations on the unit 1 To 2 To turn the unit on Press select TV or BD/DVD P. Turn INPUT SEECTOR _ + 3 Watch 4 To TV or DVD adjust the volume Turn VOUME _ + 15

16 Connections Basic connections Connecting cables to video and audio terminals (Connecting equipment without HDMI terminal) Video cable Audio cable Video connection cable (not included) Optical fibre cable (not included) Stereo phono cable (not included) White () Red (R) To enjoy TV with surround sound, make connection A or B instructed below according to your equipment. Connecting the optical fibre cable Digital audio out (optical) Audio out (R) () TV the shape and fit it correctly into the terminal. Do not bend! VIDEO IN Rear panel SURROUND BACK BACK R IN IN IN (DVD RECORDER) (BD/DVD PAYER) (CABE/SAT) HDMI 1 HDMI 2 HDMI 3 COMPONENT VIDEO S VIDEO Y PEAKER) PB BD/ IN IN IN IN IN TV MONITOR DVD PAYER DVD RECORDER VCR CABE/SAT GAME VIDEO PR IN (BD/ IN IN BD/ IN IN IN IN IN TV MONITOR (DVD RECORDER) DVD PAYER) (CABE/SAT) TV MONITOR DVD PAYER DVD RECORDER VCR CABE/SAT GAME (DVD RECORDER) (BD/DVD PAYER) (TV) (CD) OPTICA 1 OPTICA 2 OPTICA COAXIA 3 DIGITA IN FM ANT CENTER AUDIO DC 5V 500mA MAX OPTION V 1 75 Ω OOP R IN SUBWOOFER SURROUND BACK SURROUND FRONT IN IN IN IN IN CD BD/DVD PAYER / ANAOG 8CH IN DVD RECORDER VCR CABE/SAT GAME TV SUBWOOFER OOP ANT EXT GND AM ANT 1 2 Digital audio out (optical) VIDEO Digital audio out (optical) VIDEO (R) () Audio out VIDEO (R) () Audio out VIDEO (R) () Audio out VIDEO 16 Blu-ray Disc/ DVD player DVD recorder VCR To connect a DVD recorder with built-in VCR (When the DVD recorder has DVD/VHS terminals, make the following connections.) Connect the DVD output terminal as 1 described above. Connect the DVD/VHS output terminal as 2 described above. Cable box or satellite receiver When you make HDMI connections ( pages 13 and 17), this connection is not necessary. The input video signal can be sent out through an output terminal of the same type only. You can change the digital input terminal setting according to the equipment to connect ( page 39). Game

17 Turn off all equipment before making any connections. Peripheral equipment sold separately unless otherwise indicated. To connect equipment, refer to the appropriate operating instructions. Connecting equipment with HDMI terminal Connection cable Video and Audio cable HDMI cable (not included) Recommended part number: RP-CDHG10 (1.0 m), RP-CDHG15 (1.5 m), RP-CDHG20 (2.0 m), RP-CDHG30 (3.0 m), RP-CDHG50 (5.0 m), etc. Preparations HDMI cable notes It is recommended that you use Panasonic s HDMI cable. This unit incorporates HDMI (V.1.3 with Deep Colour) technology. Please use High Speed HDMI Cables that have the HDMI logo (as shown on the cover). When outputting 1080p signal, please use the HDMI cables 5.0 meters or less. TV To enjoy TV with surround sound, make connection A or B instructed on page 16 according to your equipment. HDMI input Connections Rear panel SURROUND BACK BACK R IN IN IN (DVD RECORDER) (BD/DVD PAYER) (CABE/SAT) HDMI 1 HDMI 2 HDMI 3 COMPONENT VIDEO S VIDEO Y PEAKER) PB BD/ IN IN IN IN IN TV MONITOR DVD PAYER DVD RECORDER VCR CABE/SAT GAME VIDEO PR IN (BD/ IN IN BD/ IN IN IN IN IN TV MONITOR (DVD RECORDER) DVD PAYER) (CABE/SAT) TV MONITOR DVD PAYER DVD RECORDER VCR CABE/SAT GAME (DVD RECORDER) (BD/DVD PAYER) (TV) (CD) OPTICA 1 OPTICA 2 OPTICA COAXIA 3 DIGITA IN FM ANT CENTER AUDIO DC 5V 500mA MAX OPTION V 1 75 Ω OOP R IN SUBWOOFER SURROUND BACK SURROUND FRONT IN IN IN IN IN CD BD/DVD PAYER / ANAOG 8CH IN DVD RECORDER VCR CABE/SAT GAME TV SUBWOOFER OOP ANT EXT GND AM ANT HDMI Video/Audio out HDMI Video/Audio out HDMI Video/Audio out DVD recorder Blu-ray Disc/DVD player Cable box, satellite receiver, etc. HDMI connection The HDMI input terminal on the unit s rear is made to specifi cations that presume connection of a DVD recorder / Blu-ray Disc/ DVD player etc. When other equipment is connected, sounds may not come out of the unit, or pictures shown on the equipment (TV) connected to the HDMI output terminal may be disrupted. In such cases, see pages 16, 18 and 19 and make connections other than HDMI. The audio signal transmitted through HDMI takes priority when you use both HDMI and digital terminals for connection ( pages 16, 18 to 20). You can change the settings on HDMI 3 terminal according to the equipment to connect ( page 39). Playback is available with the basic connections ( page 26). Besides To make high-picture-quality connections ( pages 18 and 19) Besides To enjoy analogue sounds ( page 20) Besides To connect other equipment, etc. ( pages 20 to 23) 17

18 Connections Connecting cables to S video and audio terminals Connection cable Video cable S VIDEO connection cable (not included) Optical fibre cable (not included) Audio cable Stereo phono cable (not included) White () Red (R) TV To enjoy TV with surround sound, make connection A or B instructed in page 16 according to your equipment. S VIDEO IN Connecting the optical fibre cable Rear panel the shape and fit it correctly into the terminal. Do not bend! SURROUND BACK BACK R IN IN IN (DVD RECORDER) (BD/DVD PAYER) (CABE/SAT) HDMI 1 HDMI 2 HDMI 3 COMPONENT VIDEO S VIDEO Y PEAKER) PB BD/ IN IN IN IN IN TV MONITOR DVD PAYER DVD RECORDER VCR CABE/SAT GAME VIDEO PR IN (BD/ IN IN BD/ IN IN IN IN IN TV MONITOR (DVD RECORDER) DVD PAYER) (CABE/SAT) TV MONITOR DVD PAYER DVD RECORDER VCR CABE/SAT GAME (DVD RECORDER) (BD/DVD PAYER) (TV) (CD) OPTICA 1 OPTICA 2 OPTICA COAXIA 3 DIGITA IN FM ANT CENTER AUDIO DC 5V 500mA MAX OPTION V 1 75 Ω OOP R IN SUBWOOFER SURROUND BACK SURROUND FRONT IN IN IN IN IN CD BD/DVD PAYER / ANAOG 8CH IN DVD RECORDER VCR CABE/SAT GAME TV SUBWOOFER OOP ANT EXT GND AM ANT Digital audio out (optical) S VIDEO Digital audio out (optical) S VIDEO (R) () Audio out S VIDEO (R) () Audio out S VIDEO (R) () Audio out S VIDEO 18 Blu-ray Disc/ DVD player DVD recorder VCR Cable box or satellite receiver The input video signal can be sent out through an output terminal of the same type only. You can change the digital input terminal setting according to the equipment to connect ( page 39). Game

19 Turn off all equipment before making any connections. Peripheral equipment sold separately unless otherwise indicated. To connect equipment, refer to the appropriate operating instructions. Connecting cables to component and audio terminals The component video terminals can produce more accurate colours than the S video terminals ( page 18). Connection cable Video cable Audio cable Video connection cable (not included) Optical fibre cable (not included) Stereo phono cable (not included) White () Red (R) TV To enjoy TV with surround sound, make connection A or B instructed in page 16 according to your equipment. COMPONENT VIDEO IN Y PB PR Connecting the optical fibre cable the shape and fit it correctly into the terminal. Do not bend! Preparations Connections Rear panel SURROUND BACK BACK R IN IN IN (DVD RECORDER) (BD/DVD PAYER) (CABE/SAT) HDMI 1 HDMI 2 HDMI 3 COMPONENT VIDEO S VIDEO Y PEAKER) PB BD/ IN IN IN IN IN TV MONITOR DVD PAYER DVD RECORDER VCR CABE/SAT GAME VIDEO PR IN (BD/ IN IN BD/ IN IN IN IN IN TV MONITOR (DVD RECORDER) DVD PAYER) (CABE/SAT) TV MONITOR DVD PAYER DVD RECORDER VCR CABE/SAT GAME (DVD RECORDER) (BD/DVD PAYER) (TV) (CD) OPTICA 1 OPTICA 2 OPTICA COAXIA 3 DIGITA IN FM ANT CENTER AUDIO DC 5V 500mA MAX OPTION V 1 75 Ω OOP R IN SUBWOOFER SURROUND BACK SURROUND FRONT IN IN IN IN IN CD BD/DVD PAYER / ANAOG 8CH IN DVD RECORDER VCR CABE/SAT GAME TV SUBWOOFER OOP ANT EXT GND AM ANT Digital audio out (optical) Y PB PR Y PB PR Y PB PR COMPONENT VIDEO (R) () Audio out COMPONENT VIDEO Digital audio out (optical) COMPONENT VIDEO DVD recorder Cable box or satellite receiver Blu-ray Disc/ DVD player Component video terminals The component video terminals (colour-difference video terminals) output red (PR), blue (PB), and luminance (Y) signals separately. The terminals reproduce colours with greater accuracy for this reason. The input video signal can be sent out through an output terminal of the same type only. You can change the settings for the digital input terminal and Component Video 3 terminal according to the equipment to connect ( page 39). 19

20 Connections Other connections Connection cable Video connection cable (not included) Video cable S VIDEO connection cable (not included) Coaxial cable (not included) Audio cable Stereo phono cable (not included) White () Red (R) To enjoy analogue sounds Make analogue connections according to your equipment and preference. See pages 16, 18 and 19 for video connections. Rear panel (DVD RECORDER) (BD/DVD PAYER) (CABE/SAT) HDMI 1 HDMI 2 HDMI 3 COMPONENT VIDEO S VIDEO Y BD/ IN IN IN IN IN PB TV MONITOR DVD PAYER DVD RECORDER VCR CABE/SAT GAME VIDEO PR IN (BD/ IN IN BD/ IN IN IN IN IN TV MONITOR (DVD RECORDER) DVD PAYER) (CABE/SAT) TV MONITOR DVD PAYER DVD RECORDER VCR CABE/SAT GAME (DVD RECORDER) (BD/DVD PAYER) (TV) (CD) OPTICA 1 OPTICA 2 OPTICA COAXIA 3 DIGITA IN FM ANT () AUDIO (R) Blu-ray Disc/ DVD player R AUDIO CENTER IN SUBWOOFER SURROUND BACK SURROUND FRONT IN IN IN IN IN CD BD/DVD PAYER / ANAOG 8CH IN DVD RECORDER VCR CABE/SAT GAME TV 75 Ω DC 5V 500mA MAX OPTION V 1 OOP OOP ANT EXT GND AM ANT SUBWOOFER () AUDIO (R) DVD recorder KCK To enjoy high-quality analogue sounds (Analogue 8-channel connections) See pages 16, 18 and 19 for video connections. Rear panel Y IN IN IN (DVD RECORDER) (BD/DVD PAYER) (CABE/SAT) HDMI 1 HDMI 2 HDMI 3 COMPONENT VIDEO S VIDEO CENTER SUBWOOFER () SURROUND (R) BACK BD/ IN IN IN IN IN PB TV MONITOR DVD PAYER DVD RECORDER VCR CABE/SAT GAME VIDEO PR (DVD RECORDER) (BD/DVD PAYER) (TV) (CD) OPTICA 1 OPTICA 2 OPTICA 3 COAXIA IN (BD/ IN IN BD/ IN IN IN IN IN DIGITA IN TV MONITOR (DVD RECORDER) DVD PAYER) (CABE/SAT) TV MONITOR DVD PAYER DVD RECORDER VCR CABE/SAT GAME FM ANT AUDIO 75 Ω CENTER DC 5V 500mA MAX OPTION V 1 OOP R OOP ANT EXT GND IN SUBWOOFER SURROUND BACK SURROUND FRONT IN IN IN IN IN AM ANT CD BD/DVD PAYER / ANAOG 8CH IN DVD RECORDER VCR CABE/SAT GAME TV SUBWOOFER () (R) SURROUND () (R) FRONT Blu-ray Disc/DVD player etc. See page 27 for playback instructions. When you make HDMI connections ( pages 13 and 17), this connection is not necessary. To connect the unit to a CD player Make either digital audio (COAXIA) output connections (A) or analogue audio output connections (B) according to your equipment and preference. Rear panel (DVD RECORDER) (BD/DVD PAYER) (CABE/SAT) HDMI 1 HDMI 2 HDMI 3 COMPONENT VIDEO S VIDEO Y BD/ IN IN IN IN IN PB TV MONITOR DVD PAYER DVD RECORDER VCR CABE/SAT GAME VIDEO PR (DVD RECORDER) (BD/DVD PAYER) (TV) (CD) OPTICA 1 OPTICA 2 OPTICA 3 COAXIA IN (BD/ IN IN BD/ IN IN IN IN IN DIGITA IN TV MONITOR (DVD RECORDER) DVD PAYER) (CABE/SAT) TV MONITOR DVD PAYER DVD RECORDER VCR CABE/SAT GAME FM ANT AUDIO 75 Ω CENTER DC 5V 500mA MAX OPTION V 1 OOP R OOP ANT EXT GND IN SUBWOOFER SURROUND BACK SURROUND FRONT IN IN IN IN IN AM ANT CD BD/DVD PAYER / ANAOG 8CH IN DVD RECORDER VCR CABE/SAT GAME TV SUBWOOFER DIGITA AUDIO (COAXIA) () AUDIO (R) CD player 20 You can change the digital input terminal setting according to the equipment to connect ( page 39).

21 MUTI CH PROCESSING TrueHD D+ DTS-HD MUTI CH PCM BI-AMP WIREESS READY SURROUND M.ROOM Turn off all equipment before making any connections. Peripheral equipment sold separately unless otherwise indicated. To connect equipment, refer to the appropriate operating instructions. BACK To connect the unit for audio or picture recording You can record audio or pictures to the equipment connected to DVD recorder output terminal (AUDIO, VIDEO, S VIDEO). See page 41 for more details. Rear panel R Y PB PR IN IN IN (DVD RECORDER) (BD/DVD PAYER) (CABE/SAT) HDMI 1 HDMI 2 HDMI 3 COMPONENT VIDEO BD/ IN IN IN IN IN TV MONITOR DVD PAYER DVD RECORDER VCR CABE/SAT GAME VIDEO IN (BD/ IN IN BD/ IN IN IN IN IN TV MONITOR (DVD RECORDER) DVD PAYER) (CABE/SAT) TV MONITOR DVD PAYER DVD RECORDER VCR CABE/SAT GAME CENTER AUDIO S VIDEO IN SUBWOOFER SURROUND BACK SURROUND FRONT IN IN IN IN IN CD BD/DVD PAYER / ANAOG 8CH IN DVD RECORDER VCR CABE/SAT GAME TV (DVD RECORDER) (BD/DVD PAYER) (TV) (CD) OPTICA 1 OPTICA 2 OPTICA COAXIA 3 DIGITA IN DC 5V 500mA MAX OPTION V 1 SUBWOOFER OOP ANT GND 75 Ω OOP EXT FM ANT AM ANT S VIDEO IN VIDEO IN () AUDIO (R) IN DVD recorder, etc. Connections Preparations Connect the recording unit and source unit using the same cable. To connect the unit to a video camera etc. These terminals are convenient for equipment you want to connect only temporarily. Use a cable, A or B that belongs to the same type as the video cable you used for connecting the unit to your TV. SETUP MIC SURROUND SPEAKERS A SPEAKERS B AUX S VIDEO VIDEO - AUDIO - R INPUT SEECTOR AUTO SPEAKER SETUP RETURN -SETUP OK _ TUNE VOUME + S VIDEO VIDEO () AUDIO (R) Video camera etc. How to attach or remove the front terminal cover Attaching the cover is recommended to protect terminals when not in use. To attach To remove The dent Terminal cover Place the dent on the left to insert. Press the dent. Hold the protrusion to remove. 21

22 Connections Connecting other speakers To connect bi-wire speakers Make sure to select YES in Making bi-wire setting ( page 38) when you connect the unit to bi-wire speakers. The speakers do not produce adequate sounds unless you make this setting. Rear panel HF FRONT A FRONT FRONT B B CENTER CENTER SURROUND SURROUND BACK BACK F HF BI-WIRE R R R R HF Front speaker (R) Rear view Front speaker () Rear view A OR B / BI-WIRE (4-16 Ω EACH SPEAKER) A AND B (6-16 Ω EACH SPEAKER) SPEAKERS (6-16 Ω EACH SPEAKER) P F Speaker impedance BI-WIRE: 4 to 16 Ω AC IN~ PR O TV MON R IN CD F Speaker cable (not included) Make sure to connect speakers HF terminals with the unit s FRONT B terminals, and speakers F terminals with the unit s FRONT A terminals. Different amps for high frequency and low frequency signals produce BI-AMP stereo sounds that are clearer and higher in audio quality when you play on 2 channels sources containing analogue audio and 2-channel PCM signals ( page 51). When connecting speakers with the impedance of 4 Ω, make sure to set 4 OHMS in Setting the speaker impedance on page 38. See s on To connect bi-wire speakers on page 50 for more details. To connect a second pair of front speakers (SPEAKERS B) Make the following connections when you wish to install a second pair of speakers in another room and enjoy music there. Rear panel FRONT A FRONT FRONT B B CENTER CENTER SURROUND SURROUND BACK BACK F HF BI-WIRE R R R R Front speaker (R) Front speaker () Speaker impedance Front A or B: 4 to 16 Ω Front A and B: 6 to 16 Ω A OR B / BI-WIRE (4-16 Ω EACH SPEAKER) A AND B (6-16 Ω EACH SPEAKER) SPEAKERS (6-16 Ω EACH SPEAKER) P PR O TV MON Speaker cable (not included) AC IN~ R IN CD When connecting speakers with the impedance of 4 Ω, make sure to set 4 OHMS in Setting the speaker impedance on page 38. See s on SPEAKERS B on page 51 for more details. 22

23 Turn off all equipment before making any connections. Peripheral equipment sold separately unless otherwise indicated. To connect equipment, refer to the appropriate operating instructions. To enjoy wireless audio with SH-FX67 You can connect left and right surround speakers wirelessly by using Panasonic SH-FX67 (a set consisted of a digital transmitter and a wireless system sold separately) with the unit ( page 27). To use these options, insert the digital transmitter into the unit s digital transmitter terminal and connect surround speakers to SH-FX67 s wireless system. See SH-FX67 s operating instructions for details. Rear panel ACK K R Y PB PR IN IN IN (DVD RECORDER) (BD/DVD PAYER) (CABE/SAT) HDMI 1 HDMI 2 HDMI 3 COMPONENT VIDEO AUDIO S VIDEO BD/ IN IN IN IN IN TV MONITOR DVD PAYER DVD RECORDER VCR CABE/SAT GAME VIDEO IN (BD/ IN IN BD/ IN IN IN IN IN TV MONITOR (DVD RECORDER) DVD PAYER) (CABE/SAT) TV MONITOR DVD PAYER DVD RECORDER VCR CABE/SAT GAME CENTER IN SUBWOOFER SURROUND BACK SURROUND FRONT IN IN IN IN IN CD BD/DVD PAYER / ANAOG 8CH IN DVD RECORDER VCR CABE/SAT GAME TV (DVD RECORDER) (BD/DVD PAYER) (TV) (CD) OPTICA 1 OPTICA 2 OPTICA COAXIA 3 DIGITA IN DC 5V 500mA MAX OPTION V 1 SUBWOOFER OOP ANT GND 75 Ω OOP EXT FM ANT AM ANT How to insert the digital transmitter 1 Press the dents on both sides with force. 2 Remove the cover Dents Use care because the cover may pop out. 3 Insert fi rmly with the label side facing front. abel Connections Preparations [About MUTI ROOM function] When the surround speakers are not used wirelessly, you can use wireless speakers to enjoy music in another room while enjoying the surround playback with speakers connected to this unit (MUTI ROOM). Make sure to set MUTI ROOM in Setting wireless speakers ( page 39) to enjoy using MUTI ROOM function. Set SH-FX67 s surround selector to 5.1ch playback mode when using MUTI ROOM function. See SH-FX67 s operating instructions for more information. Digital transmitter [About 7.1 channel playback] By using 2 sets of SH-FX67, you can enjoy 7.1 channel playback, making the surround speakers and surround back speakers wireless. In that case, make ID number setting ( page 27). Setting of the surround selector on SH-FX67 is necessary for 7.1 channel playback. See SH-FX67 s operating instructions for more information. Connecting antennas When fi nished connecting antennas, tune the radio station once ( pages 46 and 47) and fi x the antennas where reception is best. Adhesive tape Rear panel KCK Y IN IN IN (DVD RECORDER) (BD/DVD PAYER) (CABE/SAT) HDMI 1 HDMI 2 HDMI 3 COMPONENT VIDEO S VIDEO AM loop antenna (included) Keep the antenna cord away from DVD recorders, Blu-ray Disc/DVD players, and other cords. FM indoor antenna (included) Fix the other end of the antenna where reception is best. PB BD/ IN IN IN IN IN TV MONITOR DVD PAYER DVD RECORDER VCR CABE/SAT GAME VIDEO PR IN (BD/ IN IN BD/ IN IN IN IN IN TV MONITOR (DVD RECORDER) DVD PAYER) (CABE/SAT) TV MONITOR DVD PAYER DVD RECORDER VCR CABE/SAT GAME AUDIO CENTER 1 (DVD RECORDER) (BD/DVD PAYER) (TV) (CD) OPTICA 1 OPTICA 2 OPTICA COAXIA 3 DIGITA IN FM ANT 2 75 Ω DC 5V 500mA MAX OPTION V 1 OOP 1 2 White Red R IN SUBWOOFER SURROUND BACK SURROUND FRONT IN IN IN IN IN CD BD/DVD PAYER / ANAOG 8CH IN DVD RECORDER VCR CABE/SAT GAME TV 3 SUBWOOFER OOP ANT EXT GND AM ANT Black FM outdoor antenna (not included) Disconnect the FM indoor antenna. The antenna should be installed by a competent technician. 75 Ω FM ANT FM outdoor antenna 75 Ω coaxial cable Antenna plug adapter (included and necessary for the United Kingdom and Republic of Ireland) 23

24 MUTI CH PROCESSING TrueHD D+ DTS-HD SETUP MIC MUTI CH PCM BI-AMP SURROUND SPEAKERS A SPEAKERS B AUX S VIDEO VIDEO - AUDIO - R WIREESS READY SURROUND M.ROOM INPUT SEECTOR AUTO SPEAKER SETUP RETURN -SETUP OK SETUP MIC SURROUND SPEAKERS A SPEAKERS B AUX S VIDEO VIDEO - AUDIO - R TUNE AUTO SPEAKER SETUP VOUME Auto speaker setup using the setup microphone Using the supplied setup microphone, you can measure such items as distance from the seating area, polarity and size and make adjustment for connected speakers. Keep quiet during the auto speaker setup. Conversational voice, air-conditioning noise and small sounds made by winds may cause an error or produce an incorrect setting. Speakers output loud test signals during the auto speaker setup. Make sure to keep little children out of the room. Mute the TV volume before starting the auto speaker setup. When the subwoofer is connected, make sure it is turned on. (There are subwoofer models that turn off automatically.) Set the subwoofer volume to the normal listening level. Select YES in Making bi-wire setting ( page 38) when you connect the unit to bi-wire speakers. SPEAKERS A _ + 1 To 2 Confirm 3 Connect turn the unit on Press [^]. AUTO SPEAKER SETUP The standby indicator ^ goes off when you turn the unit on. You can also turn this unit on by pressing [8] on the unit. A is displayed on the unit s display. If A is not displayed, press [SPEAKERS A]. the setup microphone (included). 4 Place Setup microphone the setup microphone (included). Place the setup microphone on a fl at surface to stabilize it. Examples: A level bench sharing the height with the seating area, a top section of a sofa etc. Set the microphone at seated ear height. Use a tripod (for camera and other products) for best results To 6 To start the setup Press and hold [ AUTO, TEST] (on the remote control) for 2 seconds. The AUTO SPEAKER SETUP indicator fl ashes. The unit cancels the auto speaker setup halfway through when you give a different operational instruction before the setup fi nishes. To cancel the setup halfway, press [ AUTO, TEST]. finish the setup When all auto settings are made, COMPETE appears and the AUTO SPEAKER SETUP indicator lights on. You can perform other operations after COMPETE is displayed. The unit keeps the settings even if you move straight on to another operation. Press [ AUTO, TEST] (on the remote control). Unplug the setup microphone when the setup is fi nished. Tripod etc.