User Manual. SMARTOMI HOOP Wireless Headphones

Transcription

1 User Manual SMARTOMI HOOP Wireless Headphones

2 Accessories User Manual Wireless Headphone Micro USB Cable 3.5mm Audio Cable Please read the user manual before using the headphone and keep it in a safe place for future reference. 1

3 Product Introduction Headphone Functions Previous Next Volume+ VolumePlay/Pause Mic Power Line In Jack USB Port 2

4 Product Introduction 1 Previous 2 Next 3 Pause/Play 4 Mic 5 Volume+ 6 Volume7 Power 8 Line In Jack 9 USB Port LED Indicator Operation/State LED Indicator Status Power On Blue light blinking Pairing Mode Alternating red and blue lights Power Off Red light on for three seconds Charging Indicator Red light on Fully Charged Blue light on Calling Blue light blinking In Conversation Blue light blinking 3

5 Adjustable Headphone Adjustable Headphone The headband is adjustable on both sides for optimum comfort. Rotary Function rotation for easy transport and storage. 4

6 Function Introduction Calling Operation Answering/Ending a Call: Press the power button to accept a call. Press the power button again to end a call. Rejecting a Call: Method 1: Press and hold the power button for two seconds. Method 2: Press the reject button on your phone. Music/Call Switch: Music is automatically paused when a call comes in. When a call ends, music automatically resumes. Redialing Last Number: Double press (two consecutive presses) the power button to call the last number dialed. Tips: When paired with an iphone, the headset s battery level is displayed right next to the headset icon near the top right corner of the screen. The headset is automatically turned off if it is in pairing mode for more than 5 minutes without a successful connection. 6

7 Function Introduction Pairing Instructions Step 1: Go into your phone s list of Bluetooth devices. Step 2: Keep your phone and the headset close to each other (3 feet apart). Step 3: With the headset off, press and hold the power button until the blue and red indicator lights on the left ear cup flash alternately. Step 4: Locate and tap SMARTOMI Hoop from the list of Bluetooth devices that are available to pair with your phone. If prompted for a password, enter Pairing is complete when the red and blue lights stop blinking alternately, leaving only the blue light blinking. Step 5: After successful pairing, the headset can now be used to listen to music or make phone calls. Care and Maintenance Keep the headset away from heat and humidity. Do not drop or bump the headset. Do not use chemicals or detergents to clean the headset. 5

8 Function Introduction Multi-Point Devices Pairing 1. Please make sure the Bluetooth function of your devices in the status of turn off before pairing. And if you paired the Hoop with your devices before, please remove the pairing record on your devices first. 2. Keep your phone and the headset close to each other (3 feet apart). 3. With the headset off, press and hold the power button until the blue and red indicator lights on the left ear cup flash alternately. 4. Turn on the Bluetooth on your device A, locate and tap SMARTOMI Hoop on device A. Pairing is complete when the red and blue lights stop blinking alternately, leaving only the blue light blinking. 5. Turn off the Bluetooth function on device A, then turn on the Bluetooth function on device B, locate and tap SMARTOMI Hoop on device B. Pairing is complete when the red and blue lights stop blinking alternately, leaving only the blue light blinking. 6. Turn on the Bluetooth function on device A again, and tap SMARTOMI Hoop on device A to complete the pairing with the device A, then multi-point devices pairing will be done. 7

9 Product Specifications Speaker Specifications Speaker diameter: Ø40mm Impedance: 32Ω S. P. L: 115 ± 3dB S. P. L. at 1KHz Rated power: 20mW Aggregate capability: 40mW Frequency Response: 20Hz-20,000Hz Microphone Specifications Microphone Unit: Ø4*1.5mm Microphone directivity: full directivity S. P. L: -42 ± 3dB Impedance: 2.2KΩ Frequency Response: 30Hz-16,000Hz Operating voltage: 3.0V 8

10 Specifications Specifications Bluetooth IC: CSR8645 with aptx Bluetooth Version: BT4.1 Dimension: 170*200*75mm Net Weight: 189g Operating Voltage: 3.7V Low Power Indication Voltage: 3.4V Play Time: 16 Hours Charging Voltage: DC 5V Charging Connector: Micro USB Interface Charging Time: 1 Hour Charging Current: 500mA Extra Audio Input Interface: 3.5mm Headphone Jack Thanks you for choosing SMARTOMI. We provide 24/7 customer service because your satisfaction is our top priority. If you have any questions, issues or problems about our products or services, please feel free to contact us at. We re always here to help. 9

11