BTI-017 Bluetooth Audio Receiver

Transcription

1 BTI-017 Bluetooth Audio Receiver English Manual BTI-017 is a Bluetooth audio receiver, with playing time reached 14 hours at the maximum volume once fully charged(using a standard micro USB port, 5V charging voltage),supports Bluetooth V4.1 communication protocol (A2DP V1.2, AVRCP V1.4) Button Functions Power ON/OFF button Switch to ON : Power On Switch to OFF : Power OFF Multifunction Button Hold and press the button for 5 seconds: Empty clean the record of Bluetooth pairing Short press the button: Play/Pause Re-connection mode: Short press the button into the pairing mode. Instructions for Button and Interface A B C D E USB charging port Audio port Power on/off State Indicator Multifunction Button

2 LED State Indicator Power on : Blue LED flashes 5 times Power off: Red LED lights on 1 seconds Pairing mode: Blue and Red LED flashes alternately flash Unconnected standby mode: Blue LED flashes twice every 3 seconds Connected standby mode: Blue LED flashes once every 5 seconds Music playing status: Blue LED flashes once every 5 seconds Empty the record of Bluetooth pairing status: Blue and red LED flashes twice at the same time. Low power status: Red LED flashes once every 20 seconds In charging status: Red LED long light Fully charged: Red LED is off, Blue LED long light 3.Function Description 3.1 Noun Explanation A: Bluetooth pairing: the Bluetooth enabled mobile phone, computer, tablet and other devices (Support HSP, A2DP, AVRCP etc. profile) pair with Bluetooth speaker. The pass code is no need when pairing with the device with V2.1 version or above. B: Manually re-connection: when the Bluetooth function of a mobile phone or computer is ON (this mobile phone or computer had already connected with the headphone or speaker and still have connection records), power on the headphone or speaker, and click the pairing connection records of the mobile phone or computer to connect the headphone or speaker. C: Automatically re-connection: when the Bluetooth function of a mobile phone or computer is ON (this mobile phone or computer had already connected with the headphone or speaker and still have connection records), power on the headphone or speaker, it will connect with the last mobile phone or computer automatically. 3.2 First time to pair with a Bluetooth headphone

3 A. Switch to ON, the Blue LED flashes 5 times into the unconnected status, and then short press, the blue and red LED flashes alternately, enter into the pairing mode.(if the Bluetooth audio receiver haven t paired with any device, the receiver will enter into the pairing mode automatically once power ON) B: Open the mobile phone and turn on Bluetooth, search the Bluetooth pairing name "BTI-017", click "BTI-017" to connect. After several seconds you will hear the successful pairing connection tone and LED will turn to Blue with slowly flash, the mobile phone will indicate successful connection with the "BTI-017". C, Insert audio cable to audio port of BTI-017 with speakers or headsets, play music on your phone, you can listen music from the speaker or the headset. Short press the multifunction, can play/pause the music. 3.3 Operation for Receiver pairing again A, Switch to ON and enter into the re-connected status, while in the status of re-connected status, can click mode. to enter into the pairing B, After connected successfully, follow up the method in C of 3.2 to use. C, Standby mode, hold and press for 5 seconds until the red and blue LED flashes twice at the same time, can empty the record of pairing.if emptied, follow up the method in 3.2 to operate and use Operation of Double Connection A, Follow up the operation in 3.2, and connected the first mobile phone. B, Turn off the Bluetooth function of the first mobile phone, and short press the Multifunction button of BTI-017 enter into the pairing mode again, and follow up the using method in 3.2 connected with the second mobile.

4 C, Turn on the first mobile Bluetooth function, search the paring name of BTI-017 click it to connect. D, Connected successfully to realize the function of connection with two Bluetooth device. 3.5.Other Functions A, The Red LED will be long light when charging, then turn to Blue LED long light after charging is completed. B, No connection more than 20 minutes or battery voltage is less than 3.0V, receiver will automatic turn off. C, When the battery voltage is lower than 3.2V,the receiver will enter into the low power status, and the red LED light flashes with alarm prompt. Technical Parameters Bluetooth Version: V4.1 Built-in Li-ion battery Voltage: 3.7V Net Weight: about 20g Charging Voltage: 5V Size: Φ49*13mm Battery Capacity:280mAh SNR: 90dB Charging time:about 2 hours Charging Current: 150mA Standby time : about 250 hours Working Time: about 14H (at maximum volume) Notice: Keep them out of reach for small children Please don't strike or hit the product Keep the product away from water and high temperature; do not use this product at extreme weather. Do not throw the product into fire. Do not block the mesh of the speaker If the product has problems, please do not take apart by yourself and return to the shops where you bought for repairing. Rust, surface shedding is the natural oxidation, which is not under the warranty.

5 Warranty Card When Purchasing this product, please fill in this card and be properly preserved. Product Name: Purchase Date: Customer Name: Customer Tel: Customer Add: Distribution: Distributor Tel: Distributor Add: Signature: