A 2706F CD/MP3 AUDIO PLAYER WITH DAB+/FM TUNER AND BLUETOOTH REDBACK AM/FM TUNER & CD/MP3 DISC PLAYER.

Transcription

1 REDBACK AM/FM TUNER & CD/MP3 DISC PLAYER A 2706F CD/MP3 AUDIO PLAYER WITH DAB+/FM TUNER AND BLUETOOTH Congratulations on your purchase of the Redback anti shock CD / USB/ SD Card reader player with DAB+ and FM radio tuner as well as Bluetooth sync playback. This device is a versatile media player with RS-232 port for PC interfacing as well as an IR remote control. It is comprised of two sections - a receiver (DAB+/FM tuner + Bluetooth) and a media player (CD / USB / SD CARD) which also boasts a record function (AUX). Features Anti-shock CD player which accepts CD, CD-R, CD-RW, MP3 discs plus USB flash drive and SDHC/MMC memory cards for MP3 playback Accepts file types of MP3 and WMA files (on all formats above). Has 4x RCA outputs (CD/Tuner/Bluetooth/Priority) and 1x RCA input (AUX) for recording (analogue to MP3 digital). Can record CD or AUX input direct to either USB or SD media (max 32GB SD card). Copy digital MP3 files directly at high speed from USB to SD Card and vice versa. Any output (or another source) can be routed to the AUX input RCA for recording to USB or SD card. Stream Bluetooth, FM/DAB, play CD or SD card or USB drive all at once to different outputs. Included Accessories FM/DAB Antenna Wire CD / USB Media Player Remote Control IEC Power Cord Rack Mounting Brackets Operating Guidelines Do not use this player where the temperatures are below 5 C or exceed 35 C. To keep the laser pick-up clean, do not forget to close the disc tray. Do not attempt to clean the unit with chemical solvents as this may cause damage. Use a clean, dry cloth. Installation 1. The unit is supplied with separate Tuner and Audio player RCA line level outputs, plus a Priority RCA live level output. The Priority output gives the audio player priority and then switches to Tuner when the audio player tracks have finished. Connect the stereo RCA output(s) as required to a line level amplifier input. 2. Connect a suitable FM antenna to the FM antenna terminals, and connect the AM loop antenna to the AM antenna terminals. 3. Connect the IEC cable to the unit, and plug it in to a 240V mains outlet. Install the batteries (supplied) in the remote control. 4. Switch the mains outlet on. Manufactured in China for Altronic Distributors Pty Ltd

2 REDBACK DAB+/FM Tuner & CD/MP3 Disc Player Power switch USB socket input CD player slot CD/Audio Player LCD readout Prog - Program button for playlist creation and storage 6. Rev QQ - Skips to the previous track. Press and hold for review. 7. Cue PP - Skips to the next track. Press and hold for fast forward Stop A Play/Pause Pn Eject R CD on indicator LED SD/MMC card socket input Funct - Switches mode from CD to USB to Card and back to CD function 1 2 Figure 2. REAR PANEL 1. RS FM antenna connection Figure 3. REMOTE CONTROL CD/TUNER Switch between CD and Tuner sections operation Station preset keys (when in Tuner mode). Numerical 0-9 Track selection keys (when in CD/USB/Card mode). To play a selected track, press Play / Pause button. Prog - Program button for playlist creation and storage Find Used in MP3 playback modes. Search alphabetically for tracks or for folder number. Menu Offers more control options for tuner, setting parameters SHIFT Press to access highlighted functions. PRESET Press to recall or store stations in the memory. FUNCT Function command (see above). MUTE Suspend or recover audio output during playback (all modes). Eject 11. Stop.A 12 Play / Pause.Pn. 13. QQ FOLDER PP - Skip to the next folder or previous folder 14. SKIP (REV / CUE) Also used to navigate menu options. Hold for Review and Fast Forward. Page Figure 1. FRONT PANEL Media Player Section 14. Rec/Del Activates the Record or Delete functions 15. Repeat Press to repeat a track or an album or Programmed playlist 16. PPF - Skip to the next folder 17. FQQ - Skip to the previous folder 18. Find Used in MP3 playback modes. Search alphabetically for tracks or for folder number. FRONT PANEL Receiver Section (DAB+ / FM Tuner and Bluetooth) Tuner LCD readout IR Receiver window DAB+ tuned mode LED Pair Bluetooth indicator LED Tune / Enter / Autoscan Jogwheel knob for tuning radio and entering a selection or starting station or frequency scan function 24. Mode - Switches between DAB+ and FM radio receivers Menu Offers more control options for tuner, setting parameters 26. Info Changed between RDS (FM) and DLNS (DAB+) data i.e. time, track, album, etc. See Tuner section for more details. 27. Pair Initiate a pairing or synching action for Bluetooth 28. Pn / BT Power Play/Pause and power on/off for BT mode 29. Down - Skip back a track with each press in BT Mode 30. Up - Skip forward a track with each press in BT Mode 31. Enter Selection button 32. Down Change frequency, search frequencies, move through menus 33. Up - Change frequency, search frequencies, move through menus. 7 3.REC IN (RCA) 4. PRIORITY OUT (RCA) 5. BT OUT (RCA) 15. SLEEP Press to set the time until the unit ceases playback and enters sleep state. 16. Enter Selection button 17. FM LIST FM Station Scan List. 18. Mode - Switches between DAB+ and FM radio receivers 19. Info Changed between RDS (FM) and DLNS (DAB+) data i.e. time, track, album, etc. See Tuner section for more details. 20. A-B Press to mark beginning and end of playback segment in any media (CD/USB/Card mode only). A-B appears on the LCD when active. 21. PLAY 1 Play one selected track once and then stop. 1 >> will appear on screen. Cancels REPEAT modes if active 22. REPEAT (CD/USB/CARD mode only) See description below, which will appear on screen. 23. REC In AUX mode, press this button to start encoding 24. DEL Press to DELETE items stored in USB / SD Card. 25. AUTOSCAN Scanning and storing new stations and frequencies in FM and DAB+ modes DAB OUT (RCA) 7. CD OUT (RCA) V AC input

3 Operation REDBACK DAB+/FM Tuner & CD/MP3 Disc Player POWER ON/OFF: The unit has a main power switch. When the main power is switched on, both LCD displays will light up. *Except where indicated, all commands here described can be performed or activated using either the front panel buttons or the remote control. AUDIO PLAYER SECTION: CD OPERATION - COMPACT DISCS The CD player accepts both 12CM and 8CM compact discs. Insert a disc into the slot with the data side facing down, and press the play button to begin playback. Use the CD/TUNER button on the remote control to switch to CD/USB/Card Mode. The CD on indicator LED will light up and the display panel will display CD and the Track number and playing time. Warning: When inserting a disk into the CD player or taking a disc out, it is necessary to let the CD player insert the disk and return automatically. Do not force the disc in or out of the disc slot as this may cause serious damage to the unit. If the unit does not accept a CD, check that Card or USB modes are not selected. Press the FUNCT button until CD displays. Press PLAY in order for the unit to load and recognise the CD. If the unit does not eject a CD, check that Card or USB modes are not selected. Press FUNCT button until CD displays. Press PLAY in order for the unit to load and recognise the CD, then STOP/EJECT. The CD will now eject. FUNCTIONS: Note: Some functions are not described in detail here because they are standard functions whose operations are simple and/or self-explanatory. Except where indicated, these functions are accessible from buttons on both the front panel and the remote control. A-B: This function is only available from the remote control. It allows a selected section of music source to be continually repeated in a loop. Press A-B once to select the start position. The display will show A and B will be flashing. Press again at the desired end position. The display will now show AB and the selected music source selection will be continually repeated. Press A-B again will cancel repeat function. FUNCT: When this button is pushed, the media player cycles through its different playback modes as shown below - CD >> USB >> CARD >> AUX. The FUNCT button is similar to a source button on some other devices. These words will appear on screen to indicate the mode selected. REPEAT: In CD Mode - Press REPEAT to repeat playing the current track only. Press repeat a second time to repeat all the tracks. Press repeat a third time to repeat all tracks in random order. Pressing a fourth time activates INTRO PLAY and pressing a fifth time returns to the normal PLAY ALL mode. The words for the various types of repetition will display on screen as you press REPEAT and cycle through each type. REPEAT: In USB/SD/MP3 Mode - Press REPEAT to change the play type to one of the following REPEAT TRACK >> REPEAT FOLDER (Album) >> REPEAT ALL >> RANDOM PLAY >> INTRO PLAY >> PLAY ALL. These words will appear on screen to indicate the Repeat mode selected. FIND: For MP3 playback Press this button to change the search mode from Track / File to Album / Folder. File search is alphanumeric and the character changes by pressing << or >> or REV or CUE. A special icon will appear on the left side of the LCD to indicate that FIND has been activated. When FIND is engaged, the playback continues. If no action is taken after pressing FIND function button, the system reverts to status quo after about 20 seconds. Page 3

4 RECORDING AUDIO: REC/DEL: This function enables the device to record from one input source to one of the available recording media USB or SD Card. The steps are the same for the REC button on the remote control. 1 Make sure the destination media is inserted correctly. You can have media inserted into both the USB and SD Card slots and the system will let you choose the destination. 2 Make sure the source input is ready i.e. insert a CD into the slot, or pair the Bluetooth with a device, or if dubbing from USB to SD Card, insert the source USB drive. In the case of recording from DAB+/FM or Bluetooth RCA outputs, connect an RCA lead from an output to the Record in (AUX) RCA input. (There is no need to use an RCA audio lead to record from CD to either USB or CARD. The audio signal is transferred internally in this case.) 3 Choose the source mode using the FUNCT button. I.E. To record from AUX mode (Source = Record In), press FUNCT until AUX appears on the LCD. 4 Press REC/DEL button (or REC on the remote control). Follow the prompts on the LCD. If two destination media (USB and SD Card) are available, the system will ask you to choose using the << or >> or REV/CUE buttons. Once selected, press REC/DEL again. The screen will say WAITING. at first and then RECORD >> USB once the recording process has begun. If there is no destination recording media inserted, the LCD will display RECORD NO MEDIA. 5 To stop encoding, press REC/DEL again or press STOP. 6 To copy a USB drive s MP3 files and folders to an SD Card (or vice versa), choose the USB as source, and select CARD as destination. The digital copying process will proceed at high speed transfer and display the percentage as each file is copied. Press STOP to interrupt or halt copying. 7 Copying from regular CD / CD-ROM or DAB+/FM or Bluetooth (via AUX) takes place in real time. The copy function will retain the order and track name and ID of the source media, except for AUX input, which will be encoded from analogue into MP3 and be given a filename in the form: REC-AUX001.MP3, REC-AUX002.MP3 etc. A folder TMC-AUX will be created in the USB Root directory. Here is the outline for the recording system file structure: ROOT DIR SUB DIR / FOLDER FILENAMESS / TRACKS USB >> TMC-AUX >> REC-AUX.MP3, REC-AUX001.MP3, REC-AUX002.MP3 USB >> TMC-CDDA >> CDDA.MP3, CDDA001.MP3, CDDA002.MP3 USB >> TMC-CDROM >> Filename001.MP3, Filename002.MP3 USB >> TMC-M2M >> Filename001.MP3, Filename002.MP3 SUB DIR / FOLDER DESCRIPTION >> TMC-AUX >> Source AUX analogue (which includes DAB+/FM, Bluetooth) >> TMC-CDDA >> Source regular audio CD >> TMC-CDROM >> Source CD with MP3 files burned onto it >> TMC-M2M >> Source either USB or SD Card (Media 2 Media copy) In USB/CARD mode, press and hold the REC/DEL to place the device into delete mode. Use << or >> or REV or CUE buttons to select a folder. Then press and hold >> button to confirm that folder and enter the track list. Then use the same buttons to select a desired file / track. Press REC/DEL key to delete the selected track. These steps are the same for the DEL button on the remote control. Repeat the process for each track in a folder that you want to delete. If no action is taken after pressing the REC/DEL function button, the system reverts to status quo after about 20 seconds. To cancel the delete function, just press STOP. Page 4

5 CD OPERATION - MP3s: When an MP3 disc is inserted, the CD player s display will show MP3. Once playback has begun, the display will show the ID3 tags including: folder number, track number and elapsed playing time. All functions operate in the same manner as regular CD playback with the addition of the FOLDER buttons (remote control) or FQQ / PPF. This function allows you to select folders of MP3 files on a disc. These are selected in alphanumeric order. SD/MMC Card: Insert SD Card or MMC Card into the slot on the front panel (see Fig1.). Push the card into the slot until it clicks into the slot. Press FUNCT source button until the screen displays CARD. Folders on the card may be navigated using the FOLDER buttons or FQQ/PPF. These are selected in alphanumeric order. Press PLAY/PAUSE to begin playback. The display and all other functions are the same as MP3 CD operation. When taking the card out push the card until you hear it click and then release the card. Do not use force to pull the card out as this may cause damage to the card or the unit. USB Flash Memory Stick: Insert USB into the USB slot on the front panel. Press FUNCT until the screen displays USB. Folders on the card may be navigated using the FOLDER buttons or FQQ/PPF. These are selected in alphanumeric order. Press PLAY / PAUSE to start playback. The display and all other functions are the same as MP3 CD operation. TRACK PROGRAMMING: To program a regular CD (CDDA): NUMBERED LIST 1. Press PROG button. The unit will display: PROGRAM CD P Where P-01 is the program element (i.e. first track) and 00 is the track number to be selected. 2. Press CUE or >> button until the desired track number is selected. You can enter the track number from the keypad if desired. 3. To enter this track number in program memory press PROG. 4. Repeat procedures 2-3 above until all of the desired tracks are programmed in whatever order. 5. Press PLAY and playback will start following the programmed playlist order. MEM will be displayed on LCD. 6. Playback can be stopped at any time by using the STOP button. To cancel the program memory press PROG button again after playback has ceased, followed by STOP. To program using MP3 CD, USB or SD card: 1. Press PROG button. The unit will display: PROGRAM P Where P-01 is the number of track to be programmed (i.e. first track), 000 is the folder number, and 0000 is the track number. 2. Press CUE button until the desired folder number is selected. 3. Then press PROG button to lock that folder number. 4. Press CUE / >> button again until the desired track number is selected. You can enter the track number from the keypad if desired. 5. Press PROG button to enter this folder and track number into memory. 6. Repeat the above steps 2-5 until all of the desired tracks from the available folders are programmed, in whatever order. 7. Press PLAY and playback will start following the programmed playlist order. MEM will be displayed on LCD. 8. Playback can be stopped at any time by using the STOP button. 9. Playback can be stopped at any time by using the STOP button. To cancel the program memory press PROG button again after playback has ceased, followed by STOP. Page 5

6 RADIO TUNER SECTION: KEYS EXPLANATION 1-10 Press one of these buttons on the remote control and the tuner will jump to that preset station whose frequency is stored in memory. Press SHIFT and one of these numerical keys and the tuner will jump to a selected preset station between This is true for both FM and DAB+ stations that have been stored in a preset memory location. Press and hold one of these numerical keys to write a receiving frequency into one of the M1-M10 preset memory locations. Press SHIFT first, then press and hold a number key, and this will save a receiving frequency into the M11-M20 preset memory. This storage method is the same for FM and DAB+ stations. The message on screen is Preset X saved where X is the number. SHIFT FM LIST AUTO-SCAN MODE MENU INFO ENTER PRESET SLEEP MUTE UP DOWN CD/TUNER Short press activates SHIFT function (Preset 11-20). A longer press and hold also activates FM scanned list (See below). FM Station scanned list. This shows which FM stations have been saved after an AUTO SCAN. (DAB+ mode is automatically in a list format for all stations). Use REV-SKIP-CUE to scroll up or down through the stored station frequencies in the list. Press ENTER to tune to the selected station. In FM and DAB modes: Press and hold for longer than two seconds to activate full scan mode. This will instruct the receiver to scan for all available frequencies, FM or DAB+ depending on the mode to which the device is set. The captured stations will be the strongest frequencies and these will be stored in general memory (i.e. not preset location). Press and hold the jogwheel as an alternative activation for this Auto-Scan function. Press this button to switch between FM and DAB+ modes. FM Mode: Audio Setting or Main Menu [Time Setup, Sleep, Factory reset, SW Version] DAB+: DAB Scan or Main Menu [Time setup, Sleep, Prune stations, Station order, Factory reset, SW version] In FM mode, it will change between the different RDS content information options like: Program Type [PTY], Program Segment [PS], Clock Time [CT], Radio Text [RT], Program ID [PI]. In DAB+ mode it will change between similar data displayed for that station Press this button to select what you desire when navigating menus or to select a station. If you use the jogwheel to tune DAB+ stations, the station you select will auto tune i.e. no need to press ENTER. You can use this button on the remote control to recall or store the favourite stations in the memory locations 20 for each mode. Recall the preset station: Press PRESET first, then use REV / CUE to select one of the 1-20 preset stations, then press ENTER key to confirm the selection. Store the station into memory: Press PRESET first, then use REV / CUE to select a memory location (1-20). Press ENTER and hold for longer than two seconds to store the present station. This is an alternative method to store a station frequency. The message on screen is Preset X saved where X is the number. You can use this button for setting the tuner (FM / DAB+) sleep time. Press SLEEP, then use DOWN or UP to select: SLEEP OFF, 15, 30, 45, 60, 90. Then press ENTER to confirm the time selection. The unit will play for the set number of minutes and then switch into standby. This function is alternatively activated from the MENU. Press to mute the audio output. Press again to recover the output back to that level. In FM mode: Press once to tune higher frequencies. Press and hold to activate the automatic search to find the next station. In DAB mode: Press once to tune to the next frequency increment or station name. In FM mode: Press once to tune lower frequencies. Press and hold to activate the automatic search to find the next station. In DAB mode: Press once to tune to the previous frequency decrement or station name. When navigating menus, press this key to select the left item. This is on the LHS of the ENTER button on the Front Panel. Switch between CD and RECEIVER section operation. The corresponding LED will illuminate on the front panel to indicate which section is operational. Only the remote control has this important button! Page 6

7 BLUETOOTH FUNCTION Note: All Bluetooth functions are controlled from the front panel buttons. None are on the remote control. Bluetooth and tuner functions can operate simultaneously without interfering with each other since each has its own separate RCA output. BUTTON PAIR LED INDICATOR PAIR BT POWER PLAY/PAUSE EXPLANATION When power is on and the Bluetooth is not paired, switching to Bluetooth mode will show the LED to be flickering. When power is on and the Bluetooth is paired to a device like a smart phone or tablet, the LED will be steady. When the Bluetooth is paired, pressing this button for 5 seconds will cancel the pair with whatever device is paired. Press and hold to activate the Bluetooth. The LED will begin flashing to indicate readiness to sync with a device. Press and hold this button again to turn off the Bluetooth power. When the Bluetooth is paired and in PLAY mode, pressing this button will pause the playback on the device. Pressing again will restart audio playback. DOWN (RHS of ENTER) UP (RHS of ENTER button) When Bluetooth is paired and in PLAY mode, pressing this key will play the previous track. When Bluetooth is paired and in PLAY mode, pressing this key will play the next track. * User can also control playback from the source device Page 7

8 RS-232 CONTROL TABLE REDBACK DAB+/FM Tuner & CD/MP3 Disc Player Byte ASCII ASCII ASCII HEX HEX The RS-232 port set to a baud rate of 9600, 8 data bits, no parity, 1 stop bit, and no flow control. CD1 Folder Skip E A A 0d 0a Folder Skip + E A A 0d 0a Down E A C 0d 0a Up E A D 0d 0a Stop E A E 0d 0a Play/Pause E A F 0d 0a Eject E A G 0d 0a Prog E A H 0d 0a ID3 E A I 0d 0a Find E A J 0d 0a Mute E A K 0d 0a Repeat E A L 0d 0a Function E A M 0d 0a Display E A N 0d 0a A-B E A O 0d 0a Card E A R 0d 0a CD E A S 0d 0a USB E A T 0d 0a Play 1 E A U 0d 0a Remain E A V 0d 0a Rec E A a 0d 0a Del E A b 0d 0a 0 E A 0 0d 0a 1 E A 1 0d 0a 2 E A 2 0d 0a 3 E A 3 0d 0a 4 E A 4 0d 0a 5 E A 5 0d 0a 6 E A 6 0d 0a 7 E A 7 0d 0a 8 E A 8 0d 0a 9 E A 9 0d 0a Byte DAB 1 ASCII ASCII ASCII HEX HEX Preset 1 E C A 0d 0a Preset 2 E C B 0d 0a Preset 3 E C C 0d 0a Preset 4 E C D 0d 0a Preset 5 E C E 0d 0a Preset 6 E C F 0d 0a Preset 7 E C G 0d 0a Preset 8 E C H 0d 0a Preset 9 E C I 0d 0a Preset 10 E C J 0d 0a Preset E C K 0d 0a Shift E C L 0d 0a Down E C M 0d 0a Up E C N 0d 0a Mute E C O 0d 0a FMList E C P 0d 0a Menu E C Q 0d 0a Info E C R 0d 0a Enter E C S 0d 0a Sleep E C T 0d 0a Mode E C U 0d 0a Autoscan E C V 0d 0a Auto search Down E C W 0d 0a Auto search UP E C X 0d 0a Preset saved 1 E C 1 0d 0a Preset saved 2 E C 2 0d 0a Preset saved 3 E C 3 0d 0a Preset saved 4 E C 4 0d 0a Preset saved 5 E C 5 0d 0a Preset saved 6 E C 6 0d 0a Preset saved 7 E C 7 0d 0a Preset saved 8 E C 8 0d 0a Preset saved 9 E C 9 0d 0a Preset saved 10 E C 0 0d 0a Answer from device if all ok + O K 0d 0a ANSWER FROM DEVICE + E R 0d 0a IF NOT ALL OK NOTICE: The partition between two orders must exceed 300ms, but the partition between AUTO search DOWN and AUTO search UP must exceed 800ms. Page 8

9 SPECIFICATIONS FM Tuner Frequency range: MHz Sensitivity: uv emf Audio Stereo Separation: db Audio Output Voltage: mv rms Audio(S+N)/N:...50 db Audio THD: % FM step Frequency: khz DAB+ section RF frequency range: ~ MHz Adjacent Channel Selectivity:... 31dB Far-off selectivity:...49db Sensitivity:...96dB CD Player Output 0dB:...1.2V ±2dB Output level difference between 0dB:...Less than 2dB Frequency response (using 1KHz 0dB as ±3dB Separation@1kHz:... More than 60dB THD@1kHz:...Less than 0.15% S/N ratio@1khz:... More than 70dB Bluetooth Electrical Performance Output 1kHz 0dB: V ±2dB Output level difference between channels@1khz 0dB:...Less than 2dB Frequency response (using 1kHz 0dB as ±3dB Separation@1kHz:... More than 60dB THD@1kHz:... Less than 0.2% S/N ration@1khz:... More than 70dB GENERAL Supply Voltage: V a.c. Dimensions (mm): W x 44H x 250D (No rack ears) Remote Control Range:... 3m (optimal), 5m (max) Page 9

10 Page 10 REDBACK DAB+/FM Tuner & CD/MP3 Disc Player

11

12 Altronic Distributors warrants this product for one year from date of purchase from Altronics or its resellers to the consumer. If this item is part of an installation or another product, please contact the installer or supplier for your warranty. During the warranty period, we undertake to repair or replace your product at no charge if found to be defective due to a manufacturing fault. The warranty excludes damage by misuse or incorrect installation (i.e. failure to install and operate device according to specifications in the supplied instruction manual), neglect, shipping accident, or no fault found, nor by use in a way or manner not intended by the supplier. For speakers, misuse includes burnt out voice coils. For repair or service please contact your PLACE OF PURCHASE. If this item was purchased directly from Altronics please make a warranty claim by: FOR MAIL ORDER CUSTOMERS (includes school and trade orders), Ringing us on and quoting your tax invoice number. Upon contacting Altronics, we will issue an R.A. (Return Authorisation). As Altronics have a number of service agents throughout Australia, a copy of the R.A. will be ed, faxed or mailed to you with full instructions of how and where to send the goods. The freight for shipping goods back to Altronics for all repairs is at the customer s expense. A copy of the R.A. form, (or at the very minimum, the R.A. number) must accompany the goods to effect the repair. Altronics will pay the return freight to the customer where the warranty claim has been accepted. Please quote the R.A. number in any correspondence to us. FOR OVER THE COUNTER PURCHASES; to make a warranty claim, please return the goods to us in any of our stores, with a copy of your proof of purchase (tax invoice). Upon leaving the goods at one of our stores, an R.A. number will be issued to you. Once repaired, you will be contacted, advising that the goods are ready to be collected from the store. It is at Altronics discretion as to whether the goods will be repaired or replaced (whilst under warranty); and as to whether identical goods will be used to replace the item due to changes of models / products. Note: Under no circumstances should you attempt to repair the device yourself or via a non-authorised Altronics service centre, as this will invalidate the warranty! Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. NOT FIELD SERVICEABLE. Distributed by Altronic Distributors Pty. Ltd. Perth. Western Australia. Phone: Fax: Internet: