Price List JULY 2014 STRINGER & CO (SCALES) LTD UNITS 4 & 5 KIMPTON ENTERPRISE PARK CLAGGY ROAD KIMPTON HERTFORDSHIRE SG4 8HP

Transcription

1 Price List JULY 2014 STRINGER & CO (SCALES) LTD UNITS 4 & 5 KIMPTON ENTERPRISE PARK CLAGGY ROAD KIMPTON HERTFORDSHIRE SG4 8HP TEL: FAX: info@stringerscales.co.uk

2 Terms & Conditions of Sale Price List July 2014 GENERAL ALL GOODS REMAIN THE PROPERTY OF STRINGER & CO (HEREINAFTER CALLED THE SUPPLIER ) UNTIL PAID FOR BY THE CUSTOMER IN FULL. ANY DAMAGE, DEFECTS OR SHORTAGES IN SUPPLY OF GOODS MUST BE NOTIFIED TO THE SUPPLIER WITHIN 48 HOURS OF RECEIPT. ANY CLAIMS SUBMITTED AFTER THIS PERIOD WILL ONLY BE CONSIDERED AT THE DISCRETION OF THE SUPPLIER. OUR STANDARD WARRANTY TERMS ARE 12 MONTHS BACK TO BASE, I.E. DEFECTIVE GOODS MUST BE RETURNED, AT THE EXPENSE OF THE CUSTOMER, TO THE SUPPLIER FOR EXCHANGE OR REPAIR. GSE BATTERIES ARE COVERED BY A 90 DAY WARRANTY PLEASE SEE SECTION 13 FOR FURTHER INFORMATION. PAYMENT TERMS ARE 30 DAY MONTHLY ACCOUNT, I.E. INVOICES RAISED BY THE SUPPLIER IN MONTH ONE SHOULD BE SETTLED IN FULL BY THE END OF MONTH TWO. ALL PRICES & SPECIFICATION CONTAINED IN THIS PRICELIST ARE SUBJECT TO CHANGE & MODIFICATION WITHOUT NOTICE. SALE OR RETURN SCALES REQUESTED FOR DEMONSTRATION PURPOSES REQUIRE AN OFFICIAL ORDER TO THE SUPPLIER FROM THE CUSTOMER AT THAT TIME. AN INVOICE WILL BE RAISED AGAINST IT UNDER OUR STANDARD PAYMENT TERMS. IF THE GOODS ARE NOT SOLD, A CREDIT NOTE WILL BE ISSUED, IN FULL, ON THEIR RETURN, AT THE CUSTOMER S EXPENSE, (COMPLETE WITH COVERING PAPERWORK FROM THE CUSTOMER). THE GOODS ARE TO BE RETURNED TO THE SUPPLIER IN AN AS NEW CONDITION COMPLETE WITH ALL ORIGINAL PACKAGING, POWER SUPPLIES, MANUALS ETC. ANY SHORTAGES OR DAMAGE WILL BE CHARGED FOR IN FULL. HIRE GOODS SUPPLIED ON HIRE ARE DONE SO AT THE CUSTOMER S RISK. ANY LOSSES OR DAMAGE CAUSED WHILE ON HIRE WILL BE CHARGED FOR IN FULL. GOODS MUST BE AVAILABLE FOR RETURN OR COLLECTION AT THE END OF THE AGREED HIRE PERIOD. IF NOT AVAILABLE THEY WILL BE SUBJECT TO FURTHER HIRE CHARGES UNTIL THEY BECOME SO. SOFTWARE SOFTWARE WILL BE SUPPLIED TO SPECIFICATION AGREED BETWEEN STRINGER & CO, THE CUSTOMER AND THE END-USER (IF DIFFERENT). ANY MODIFICATION REQUESTED AFTER ACCEPTANCE OF A COMPLETE SYSTEM OR ANY DEMONSTRATION/TRAIL VERSION WILL BE CHARGEABLE. INTELLECTUAL PROPERTY RIGHTS WILL BELONG TO THE SUPPLIER. SOFTWARE IS PROVIDED AS IS AND STRINGER & CO GRANTS NO WARRANTIES, EXPRESSED OR IMPLIED IT IS THE RESPONSIBILITY OF THE CUSTOMER AND/OR END-USER TO TEST THE SOFTWARE AND ENSURE IT SATISFIES ALL REQUIREMENTS. STRINGER & CO WILL NOT BE LIABLE FOR ANY DAMAGES INCLUDING ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR FAILURE OF THE SOFTWARE. IT IS THE RESPONSIBILITY OF THE CUSTOMER AND/OR END-USER TO PUT IN PLACE CONTINGENCY PLANS AND. SUPPORT FOR ANY AFTER THE WARRANTY PERIOD WILL BE CHARGEABLE WHETHER SUPPLIED REMOTELY BY /TELEPHONE, EQUIPMENT RETURNED TO THE SUPPLIER OR SITE VISIT. WEEE REGULATIONS AS PART OF OUR TERMS AND CONDITIONS THE CUSTOMER WILL BE RESPONSIBLE FOR ALL DISPOSAL OBLIGATIONS UNDER THE WEEE REGULATIONS. OUR WEEE REGISTRATION NO. IS WEE/KD0075UR.

3 INDEX Price List July 2014 Section 1 UWE ELECTRONIC WEIGHING EQUIPMENT 1.1 UWE General Purpose Bench & Floor Scales 1.2 UWE Counting Scales 1.3 UWE Trade Approved Retail Scales 1.4 UWE Trade Approved Bench Scales 1.5 UWE Trade Approved Floor Scales 1.6 UWE Stainless Steel Bench & Floor Scales 1.7 UWE Compact Scales Section 2 SHINKO DENSHI 2.1 Shinko Denshi Vibra Balances 2.2 Vibra Intrinsically Safe Bench Scales Section 3 KERN SCALES 3.1 Kern Pocket Scales 3.2 Kern Laboratory Balance 3.3 Kern Platform Scales 3.4 Kern Bench Scales 3.5 Sauter Force Gauges Section 4 SOEHNLE WEIGHING EQUIPMENT 4.1 Soehnle Digital Bench & Floor Scales Section 5 FM SCALES 5.1 FM Bench & Floor Scales Section 6 FURI SCALES & BALANCES 6.1 Furi Scales & Balances Section 7 MISCELLANEOUS SCALES 7.1 Nagata Bench Scales 7.2 Kain Chung Top Loading Dial Scales 7.3 Yantai Bench Scales 7.4 Avery Weigh-Tronix Section 8 CRANE SCALES 8.1 UWE Suspended and Crane Scales 8.2 Kern Hanging Scales 8.3 Nagata Crane Scales Section 9 MEDICAL & PERSONAL SCALES 9.1 UWE Personal Scales 9.2 Soehnle Medical Scales for Internal Use 9.3 Soehnle Class III Approved Digital Medical Scales 9.4 Kern Medical Scales Section 10 PLATFORMS, WEIGHBEAMS & 10.1 Platforms, Weighbeams and Bases 10.2 Soehnle Bases Section UWE Indicators 11.2 FM Indicators 11.3 Avery Weigh-Tronix Indicators 11.4 Rinstrum Indicators Section 12 Section 13 Section 14 Section 15 Section 16 Section 17 Section 18 Section 19 PRINTERS & & JUNCTION BOXES Brass, Iron, Boxes, Slotted, Block, OIML STAMPING FEES & DELIVERY & HIRE CHARGES

4 INDEX Price List July 2014 Icon Legend Approval Power Supply Display IP Rating ATEX Approved machine, can be EC verified Stamping fees extra unless stated External power adaptor Disposable batteries Rechargeable battery including average usage time (where available) Mains power with voltage requirements DC power supply input LCD display with digit height in mm Backlit LCD display with digit height in mm LED display with digit height in mm Extended display capability IP rating ATEX rating showing dust and gas zones Functions Tuning fork sensor Counting scale with three displays RS232 Product look up function with number of hotshots and PLUs Additional weighing units, decimal lbs (not available for stamped machines) Additional weighing units, lbs and ozs (not available for stamped machines) Checkweighing or check counting function Checkweighing or check counting function with audible alarm Counting function Totalising Percentage weighing Animal weighing / hold function Density measurement Underweighing capability Internal calibration Dust cover IP Ratings Level First Numeral Protection Against Solids Second Numeral Protection Against Liquids 1 Objects greater than 50 mm Dripping water 2 Objects greater than 12 mm Dripping water on enclosure tilted up to 15 3 Objects greater than 2.5 mm Spraying water up to 60 from both sides 4 Objects greater than 1.0 mm Splashing water from all sides 5 Dust protected Water jets 6 Dust tight Heavy seas or powerful jets of water 7 Short term immersion 8 Submersion 9K High-temperature, high-pressure spray

5 1 UWE ELECTRONIC WEIGHING EQUIPMENT Price List July UWE GENERAL PURPOSE BENCH & FLOOR SCALES SEK SERIES HIGH PRECISION SCALE WITH CHECKWEIGHING FUNCTION Selectable resolution up to 1:60,000. CAPACITY kg DIVISION g PLATE mm SEK x 230 SEK-12K EXTRAS Stainless Steel Cross and Scoop SEW SERIES HIGH PRECISION WEIGH ONLY BENCH SCALE Internal resolution 1:1,000,000. Selectable resolutions 1:15,000, 1:30,000 or 1:60,000. CAPACITY kg DIVISION g PLATE mm SEW x SEW SEW-12K x SEW-30K EXTRAS Stainless Steel Cross and Scoop BM SERIES GENERAL PURPOSE FLOOR SCALE WITH LARGE DIGIT DISPLAY Selectable resolution up to 1:30,000. Pole height: 460mm. CAPACITY kg DIVISION g PLATE mm BM BM x BM UWE W22 still available as a scale please see sections & for component prices UWE SHINKO KERN SOEHNLE FM FURI MISC CRANE MEDICAL

6 1 UWE ELECTRONIC WEIGHING EQUIPMENT Price List July 2014 SECTION 1.2 UWE COUNTING SCALES SHC SERIES HIGH PRECISION COUNTING SCALE Internal resolution 1:1,000,000. Displayed resolution 1:30,000. CAPACITY kg DIVISION g COUNTING RESOLUTION g PLATE mm SHC-1.5C x 180 SHC-3C SHC-6C SHC-15C x SHC-30C SAC SERIES HIGH PRECISION COUNTING SCALE WITH TRIPLE RANGE Internal resolution 1:1,000,000. UTP and IP-500 compatible. CAPACITY kg DIVISION g COUNTING RESOLUTION g PLATE mm SAC-7.5C 1.5/3/ /0.2/ SAC-15C 3/7.5/15 0.2/0.5/ x SAC-30C 7.5/15/30 0.5/1/ SDC SERIES HIGH PRECISION DUAL COUNTING SCALE Internal resolution 1:1,000,000. Displayed resolution1:12,000. Second scale limited to fixed capacities: 240, 300, 600, 1200 and 3000kg. CAPACITY kg DIVISION g COUNTING RESOLUTION g PLATE mm SDC x UWE SHINKO KERN SOEHNLE FM FURI MISC CRANE MEDICAL

7 1 UWE ELECTRONIC WEIGHING EQUIPMENT Price List July APC SERIES UWE APC-P UWE APC-P with Optional Pole UWE APC-B UWE APC-F/L/XL APPROVED COUNTING SCALE IN A VARIETY OF FORMATS Internal resolution 1:190,000. Displayed resolution 1:3,000 if stamped otherwise dual range up to 1:6,000 resolution available. 8 piece weight memories. Dual range available in non-stamped models. UTP compatible. Column heights: P: 420mm B: 460mm F & L: 650mm CAPACITY kg DIVISION g APPROVED RESOLUTION g PLATE mm APC-P APC-P APC-P x 280 APC-P APC-P APC-P APC-B APC-B x APC-B APC-F APC-F x APC-F APC-L APC-L x APC-L APC-XL APC-XL x 600 APC-XL APC-XL EXTRAS Pole Kit for APC-P x 500mm Back Rail UWE SHINKO KERN SOEHNLE FM FURI MISC CRANE MEDICAL

8 1 UWE ELECTRONIC WEIGHING EQUIPMENT Price List July 2014 SECTION 1.3 UWE TRADE APPROVED RETAIL SCALES AGP SERIES COMPACT RETAIL SCALE WITH DISPLAY FOR WEIGHT, UNIT PRICE & PRICE TO PAY Following only operational when printer attached: accumulation & calculator functions, M+, MR, MC and data recall for weighing & printing of transaction. For weighed & non-weighed articles. Switchable price per kg & price per 100g. UTP compatible. Stamping fee included. CAPACITY kg DIVISION g PLATE mm AGP AGP x AGP EXTRAS Stainless Steel Scoop and Cross ASEP & ASEP-P SERIES GENERAL PURPOSE APPROVED RETAIL SCALE ASEP-P has swivel type one-sided pole mounted display & card in sleeve on reverse of head-up display for PLU details. Following only operational when printer attached: accumulation & calculator functions, M+, MR, MC and data recall for weighing & printing of transaction. For weighed & non-weighed articles. Price per kg only. UTP compatible. Stamping fee included. CAPACITY kg DIVISION g PLATE mm ASEP-6 3/6 1/ ASEP-15 6/15 2/ ASEP-30 15/30 5/ x 280 ASEP-6P 3/6 1/ ASEP-15P 6/15 2/ ASEP-30P 15/30 5/ EXTRAS Stainless Steel Scoop and Cross AMP SERIES RETAIL SCALE WITH 42 HOT SHOTS AND 99 PLUS Following only operational when printer attached: M+, MR, MC and data recall for weighing & printing of transaction. Price per kg only. Parallel printer interface. Pillar height: 210mm. Stamping fee included. CAPACITY kg DIVISION g PLATE mm AMP-15 15kg 5g 337 x EXTRAS Stainless Steel Scoop and Cross UWE SHINKO KERN SOEHNLE FM FURI MISC CRANE MEDICAL

9 1 UWE ELECTRONIC WEIGHING EQUIPMENT Price List July 2014 SECTION 1.4 UWE TRADE APPROVED BENCH SCALES AXM SERIES GENERAL PURPOSE APPROVED BENCH SCALE CAPACITY kg RECOMMENDED NON-APPROVED DIVISION g APPROVED DIVISION g PLATE mm AXM AXM x 210 AXM AXM-15K EXTRAS Stainless Steel Scoop and Cross AM SERIES GENERAL PURPOSE APPROVED BENCH SCALE WITH TWO DIFFERENT PLATE SIZES Choice of 300 x 245mm plastic goods plate with stainless steel insert or 337 x 245mm stainless steel plate. CAPACITY kg RECOMMENDED NON-APPROVED DIVISION g APPROVED DIVISION g PLATE mm AM N/A x 245 AM N/A or AM-15K 15 N/A x AM-30K 30 N/A EXTRAS Stainless Steel Scoop and Cross APM SERIES APPROVED BENCH SCALE WITH REMOVABLE DISPLAY Base mounted or remote display or optional pole kit. CAPACITY kg RECOMMENDED NON-APPROVED DIVISION g APPROVED DIVISION g PLATE mm APM-6 6 N/A APM N/A x APM N/A EXTRAS Pole Kit UWE SHINKO KERN SOEHNLE FM FURI MISC CRANE MEDICAL

10 1 UWE ELECTRONIC WEIGHING EQUIPMENT Price List July ABM SERIES APPROVED BENCH SCALE WITH POLE MOUNTED DISPLAY Pole height: 340mm. Displayed resolution 1:3,000 if stamped otherwise selectable up to 1:30,000 resolution. CAPACITY kg RECOMMENDED NON-APPROVED DIVISION g APPROVED DIVISION g PLATE mm ABM-B ABM-B ABM-B x ABM-B ABM-B AQM SERIES COMPACT APPROVED BENCH SCALE CAPACITY kg RECOMMENDED NON-APPROVED DIVISION g APPROVED DIVISION g PLATE mm AQM N/A AQM N/A x AQM N/A ADM SERIES APPROVED IP66 BENCH SCALE WITH FRONT AND REAR DISPLAYS CAPACITY kg RECOMMENDED NON-APPROVED DIVISION g APPROVED DIVISION g PLATE mm ADM ADM ADM x ADM-15K ADM-30K ADW SERIES APPROVED IP66 BENCH SCALE WITH CHECKWEIGHING FUNCTION CAPACITY kg RECOMMENDED NON-APPROVED DIVISION g APPROVED DIVISION g PLATE mm ADW-1500C ADW-3000C ADW-6000C x ADW-15KC ADW-30KC EXTRAS Stainless Steel Scoop and Cross (for all models above) UWE SHINKO KERN SOEHNLE FM FURI MISC CRANE MEDICAL

11 1 UWE ELECTRONIC WEIGHING EQUIPMENT Price List July 2014 SECTION 1.5 UWE TRADE APPROVED FLOOR SCALES APM SERIES EC APPROVED FLOOR SCALE APPROVED FLOOR SCALE WITH FLEXIBLE DISPLAY OPTIONS Pole height (when fitted): 390mm. CAPACITY kg RECOMMENDED NON-APPROVED DIVISION g APPROVED DIVISION g PLATE mm APM APM x APM EXTRAS Pole Kit APF SERIES GENERAL PURPOSE APPROVED FLOOR SCALE Pole height: 580mm. CAPACITY kg RECOMMENDED NON-APPROVED DIVISION g APPROVED DIVISION g PLATE mm APF-60K APF-150K x APF-300K ABM SERIES APPROVED FLOOR SCALE WITH LARGE DIGIT DISPLAY Pole height 520mm. Displayed resolution 1:3,000 if stamped otherwise selectable up to 1:30,000 resolution. CAPACITY kg RECOMMENDED NON-APPROVED DIVISION g APPROVED DIVISION g PLATE mm ABM-F ABM-F x 400 ABM-F ABM-F ABM-L ABM-L x 500 ABM-L ABM-L ABM-XL ABM-XL x 600 ABM-XL ABM-XL EXTRAS 500 x 500mm Back Rail UWE SHINKO KERN SOEHNLE FM FURI MISC CRANE MEDICAL

12 1 UWE ELECTRONIC WEIGHING EQUIPMENT Price List July UWE STAINLESS STEEL BENCH & FLOOR SCALES MS SERIES BASIC ALL STAINLESS STEEL BENCH SCALE CAPACITY kg DIVISION g PLATE mm MS MS x 215 MS MS-15K AGS SERIES APPROVED IP65 STAINLESS STEEL BENCH SCALE Displayed resolution 1:3,000 if stamped otherwise 1:6,000 resolution. CAPACITY kg NON-APPROVED DIVISION g APPROVED DIVISION g PLATE mm AGS AGS x 215 AGS AGS-15K HGS SERIES HIGH RESOLUTION ALL STAINLESS STEEL BENCH SCALE Displayed resolution 1:30, other weighing units. Draft shield included with HGS-300. CAPACITY kg DIVISION g PLATE mm HGS dia HGS HGS x 215 HGS HGS-15K UWE SHINKO KERN SOEHNLE FM FURI MISC CRANE MEDICAL

13 1 UWE ELECTRONIC WEIGHING EQUIPMENT Price List July APS SERIES APPROVED IP65 STAINLESS STEEL BENCH SCALE WITH POLE MOUNTED DISPLAY Displayed resolution 1:3,000 if stamped otherwise dual range and selectable up to 1:30,000 resolution. Indicator IP65. 2 bases either IP65 aluminium load cell or IP67 stainless steel load cell. Pillar heights: standard versions 205mm & B versions 516mm. CAPACITY kg LOAD CELL / SUB FRAME RECOMMENDED NON-APPROVED DIVISION g or APPROVED DIVISION g PLATE mm APS-6 6 IP65 AL APS IP65 AL x APS IP65 AL APS-B30 30 IP65 AL APS-B60 60 IP65 AL x APS-B IP65 AL APS-6II 6 IP67 SS APS-15II 15 IP67 SS x APS-30II 30 IP67 SS APS-B30II 30 IP67 SS x 330 APS-B60II 60 IP67 SS AFS SERIES APPROVED STAINLESS STEEL SCALE WITH LARGE DIGIT DISPLAY Displayed resolution 1:3,000 if stamped otherwise dual range and selectable up to 1:30,000 resolution. Indicator IP65. 2 bases either IP65 aluminium load cell or IP67 stainless steel load cell. Pillar height: 600mm. CAPACITY kg LOAD CELL / SUB FRAME RECOMMENDED NON-APPROVED DIVISION g APPROVED DIVISION g or PLATE mm AFS-60K 60 IP65 AL AFS-150K 150 IP65 AL AFS-300K 300 IP65 AL x 425 AFS-60II 60 IP67 SS AFS-150II 150 IP67 SS AFS-300II 300 IP67 SS UWE SHINKO KERN SOEHNLE FM FURI MISC CRANE MEDICAL

14 1 UWE ELECTRONIC WEIGHING EQUIPMENT Price List July UWE COMPACT SCALES MII SERIES GENERAL PURPOSE COMPACT BENCH SCALE 1:2,500 and 1:6,000 resolution versions available. CAPACITY g DIVISION g PLATE mm MII x 130 MII SC SERIES LOW COST WEIGHING & COUNTING SCALE LOW COST WEIGHING AND COUNTING SCALE While stocks last COUNTING CAPACITY g DIVISION g PLATE mm RESOLUTION g SC x 132 SC JCK EURO / STERLING COIN CHECKER Optional plastic coin scoop. 4 backlit LCD displays showing weight, coin denomination, value, total. Selectable euro or sterling mode. CAPACITY g DIVISION g COUNTING RESOLUTION g PLATE mm JCK coin 170 x EXTRAS Plastic Coin Scoop SK SERIES GENERAL PURPOSE WEIGHING AND COUNTING SCALE While stocks last CAPACITY g DIVISION g COUNTING RESOLUTION g PLATE mm SK x UWE SHINKO KERN SOEHNLE FM FURI MISC CRANE MEDICAL

15 2 SHINKO DENSHI BALANCES & SCALES Price List July 2014 SECTION 2.1 SHINKO DENSHI VIBRA BALANCES SJ SERIES COMPACT CLASS II APPROVED HIGH RESOLUTION BALANCE Mono-metal tuning-fork sensor (mmts) with 5 year warranty. Resolution up to 1:62, step bar graph display. 10 weighing units including ct, dwt, ozt and gn. When e d machine not legal for direct sales to the public. CAPACITY g DIVISION (d) g APPROVED DIVISION (e) g OPTIONAL PLATE mm SJ-220CE dia SJ-420CE dia SJ-620CE dia SJ-2200CE x SJ-6200CE x SJ-12KCE x Built in Rechargeable Battery EXTRAS RS Under-weighing Hook AJ SERIES MID RANGE CLASS I & II APPROVED HIGH RESOLUTION BALANCE Mono-metal tuning-fork sensor (mmts) with 5 year warranty. Resolution up to 1:620, step bar graph display 11 weighing units including ct, dwt, ozt and gn. Windshield (as shown) standard on 1mg division models. When e d machine not legal for direct sales to the public. * Class I approved, verification on site only. CAPACITY g DIVISION (d) g OPTIONAL AJ-H APPROVED PLATE mm DIVISION (e) g AJ-220CE dia AJ-420CE dia AJ-620CE dia AJ-820CE* x AJ-2200CE x AJ-4200CE x AJ-6200CE* x AJ-8200CE x AJ-12KCE x AJ-H-220CE dia AJ-H-620CE dia AJ-H-2200CE x AJ-H-4200CE x Density Measurement Kit EXTRAS Built in Rechargeable Battery Under-weighing Hook UWE SHINKO KERN SOEHNLE FM FURI MISC CRANE MEDICAL

16 2 SHINKO DENSHI BALANCES & SCALES Price List July HJ SERIES HEAVY DUTY CLASS II APPROVED HIGH RESOLUTION BALANCE While stocks last Mono-metal tuning-fork sensor (mmts) with 5 year warranty. Aluminium die cast housing. Bar graph display. Windshield standard on 1mg division models. Up to 1:620,000 resolution. When e d machine not legal for direct sales to the public. CAPACITY g DIVISION (d) g APPROVED DIVISION (e) g OPTIONAL PLATE mm HJ-220CE x HJ-620CE x HJ-8200CE x EXTRAS Built in Rechargeable Battery Under-weighing Hook LN SERIES HEAVY DUTY CLASS II APPROVED HIGH RESOLUTION BALANCE Mono-metal tuning-fork sensor (mmts) with 5 year warranty. Up to 1:620,000 resolution. Aluminium die cast housing. Bar graph display. Statistic function ideal for quality control and average weight applications. Windshield standard on 1mg division models. Other versions with internal calibration and different capacities available. When e d machine not legal for direct sales to the public. LN-R versions are supplied verified. * Class I approved, verification on site only. CAPACITY g DIVISION (d) g OPTIONAL APPROVED DIVISION (e) g LN-R PLATE mm LN-223CE x LN-623CE x LN-2202CE x LN-4202CE x LN-6202CE * x LN-8201CE x LN-15001CE x LN-623RCE x LN-2202RCE x EXTRAS Built in Rechargeable Battery Under-weighing Hook UWE SHINKO KERN SOEHNLE FM FURI MISC CRANE MEDICAL

17 2 SHINKO DENSHI BALANCES & SCALES Price List July HJK SERIES STAINLESS STEEL SCALE CLASS II APPROVED HIGH RESOLUTION BENCH/FLOOR SCALE All stainless steel housing with IP65 rating. Up to 1:330,000 resolution Indicator can be mounted on base, remotely or on column (extra). Multiple weighing units including ct, dwt, ozt & gn. Bar graph display. When e d machine not legal for direct sales to the public. Other capacities available. OPTIONAL CAPACITY g DIVISION g APPROVED DIVISION g PLATE mm HJ-17KSCE x HJ-33KSCE x HJ-62KDSCE 6000/ / x Built in Rechargeable Battery EXTRAS Under-weighing Hook Pole Kit CGX SERIES HIGH RESOLUTION COUNTING SCALE Up to 1:300,000 internal resolution. Die cast aluminium housing. OPTIONAL CAPACITY g DIVISION g COUNTING RESOLUTION g PLATE mm CGX-3000E x CGX-6000E x EXTRAS Built in Rechargeable Battery HTR SERIES CLASS I APPROVED ANALYTICAL BALANCE Verification on site only. 40 step bar graph display. Up to 1:2,200,000 resolution. Anti-electrostatic 360 degree transparent wind shield. Multiple weighing units including ct, dwt, ozt & gn. OPTIONAL CAPACITY g DIVISION mg PLATE mm HTR 80CE 80g dia HTR 120CE 120g dia HTR 220CE 220g dia EXTRAS Dry Cell Battery (factory fit non-approved option) Density Determination Kit UWE SHINKO KERN SOEHNLE FM FURI MISC CRANE MEDICAL

18 2 SHINKO DENSHI BALANCES & SCALES Price List July CJ SERIES STAINLESS STEEL IP RATED CLASS II APPROVED BALANCE Class II EC approval up to 82,000 divisions, e=d. Stainless steel top housing and plate. 11 weighing units including ct, dwt, ozt & gn. OPTIONAL CAPACITY g DIVISION g PLATE mm CJ-320CE dia CJ-820CE dia CJ-3200CE x CJ-8200CE x CJ-15KCE x EXTRAS Under-weighing Hook Dry Cell Battery LF SERIES CLASS I APPROVED HIGH RESOLUTION ANALYTICAL BALANCE Electro-magnetic force compensation sensor. Windshield with cross over action allowing opening both sides with one hand LF-225DR CE dual range model stock item other models available on special order. Up to 1:2,200,000 resolution. CAPACITY g DIVISION mg PLATE mm LF-225DR CE 92 / / dia LF-124R CE dia LF-224R CE dia LF-124 CE dia LF-224 CE dia EXTRAS Density Measurement Kit LF-R 2.2 VIBRA INTRINSICALLY SAFE BENCH SCALES GZII INTRINSICALLY SAFE BENCH SCALES INTRINSICALLY SAFE ATEX APPROVED BENCH SCALES Stainless steel goods plate and housing with aluminium sub-frame. 20 step bar graph display. Supplied with safe area mains PSU. Internal calibration versions (special order only). Lower resolution Class II EC approved versions available at no extra cost (special order only). OPTIONAL CAPACITY DIVISION g APPROVED DIVISION g PLATE mm GZII-2000EX 2000g dia GZII-6000EX 6000g x GZII-12KEX 12kg x GZII-30KEX 30kg x GZII-60KEX 60kg x GZII-60KFEX 60kg 2 N/A 395 x GZII-100KFEX 100kg 5 N/A 395 x GZII-200KFEX 200kg 10 N/A 395 x UWE SHINKO KERN SOEHNLE FM FURI MISC CRANE MEDICAL

19 3 KERN SCALES Price List July KERN POCKET SCALES CM SERIES COMPACT POCKET SCALE WITH INTEGRATED HINGED COVER 85 x 130 x 25mm. Supplied with 3 x 1.5v batteries. Calibration weight supplied with model CM-60. CAPACITY g DIVISION g PLATE mm CM 60-2N x CM 150-1N x CM 320-1N x CM 1K1N x KERN LABORATORY BALANCES DBS BALANCE MOISTURE BALANCE WITH 400W HALOGEN QUARTZ GLASS HEATER Backlit LCD graphic display showing previous drying time, current temperature, units, % moisture content & drying mode. Date & time. 10 memories and 99 sample descriptions. Supplied with 10 sample plates. CAPACITY g DIVISION g PLATE mm DBS N/A DLT HIGH END MOISTURE ANALYSER WITH TOUCH SCREEN COLOUR LCD Windows CE touch operating system. 400w haolgen quartz glass heater. Memory for 300 drying programs. Drying process activity, status bar, current temperature, residual weight in %, target temperature, drying rate, current moisture content in %. 4 drying modes. 10 sample plates included. CAPACITY g DIVISION g PLATE mm DLT x 340 x UWE SHINKO KERN SOEHNLE FM FURI MISC CRANE MEDICAL

20 3 KERN SCALES Price List July PLE-N SERIES HIGH RESOLUTION BALANCE Multiple weighing modes. 3N supplied with circular draft shield. OPTIONAL PLE N CAPACITY g FINEST DIVISION g PLATE mm PLE 420-3N Dia PLE N Dia EXTRAS Rechargeable battery PFB SERIES HIGH RESOLUTION BALANCE WITH BAR GRAPH DISPLAY Draught shield supplied with PFB 300 & PFB CAPACITY g DIVISION g PLATE mm PFB dia PFB dia PFB x KERN BENCH SCALES CFS SERIES DUAL COUNTING SCALE 1:1,200,000 internal resolution. Second scale input. Alphanumeric product codes. CAPACITY kg DIVISION g COUNTING RESOLUTION PLATE mm CFS 6K x CFS 15K x CFS 30K x PCD SERIES PRECISION BALANCE WITH REMOVABLE DISPLAY. Freely selectable weighing units. Recipe weighing function. Cable length to display 1.5m. OPTIONAL CAPACITY kg DIVISION g PLATE mm PCD 10K x EXTRAS Rechargeable battery UWE SHINKO KERN SOEHNLE FM FURI MISC CRANE MEDICAL

21 3 KERN SCALES Price List July WTB-N SERIES CHECKWEIGHING SCALE WITH COLOUR CHANGING DISPLAY IP65 protected bench scale when used with rechargeable battery option. Second display at rear. Colour of display changes depending on weight. OPTIONAL CAPACITY kg DIVISION g PLATE mm WTB 1K-4N WTB 3K-4N WTB 6K-3N x WTB 10K-3N WTB 30K-3N EXTRAS Rechargeable battery FOB-S SCALE COMPACT STAINLESS STEEL BENCH SCALE OPTIONAL CAPACITY kg DIVISION g PLATE mm FOB 5K1S x EXTRAS Mains adapter KERN PLATFORM SCALES DE-D SERIES IP65 PLATFORM SCALE Multiple & selectable units & recipe function. CAPACITY kg FINEST DIVISION g PLATE mm DE 15K0.2D 6 / / DE 35K0.5D 15 / / x 308 DE 60K1D 30 / 60 1 / DE 150K2D 60 / / DE 60K1DL 30 / 60 1 / DE 150K2DL 60 / / x DE 300K5DL 150 / / EXTRAS Indicator Stand Rechargeable Battery Pack UWE SHINKO KERN SOEHNLE FM FURI MISC CRANE MEDICAL

22 3 KERN SCALES Price List July EOB, EOE, EOL & EOS SERIES EOB-NXL EOE-L EOL EOS-XL GENERAL PURPOSE PLATFORM SCALES EOS-F models feature a wireless indicator. Wall bracket supplied. EOS features rollers for easy transportation ideal for animal weighing. CAPACITY kg FINEST DIVISION g PLATE TYPES PLATE mm EOB 15K EOB 35K EOB 60K x EOB 150K EOB 300K100A Stainless Steel EOB 60K20L EOB 150K50L x EOB 300K100L EOB 150K50XL x 505 EOB 300K100XL EOE 15K EOE 35K EOE 60K x EOE 150K Painted EOE 300K EOE 150K50L x EOE 150K50XL x 505 EOE 300K100XL EOL 60K Lacquered Steel 293 x 270 EOL 120K EOS 150K50XL EOS 300K100XL Stainless Steel & x 550 EOS 150K50XL F Rubber Mat EOS 300K100XL F SAUTER FORCE GAUGES FA SERIES FK SERIES SIMPLE MECHANICAL FORCE GAUGE Push pull functionality. Real time and peak hold modes. Supplied in hard carrying case. See our website for more details. PRICE : 225 SIMPLE DIGITAL FORCE GAUGE Push pull functionality. Real time and peak hold modes. Selectable measuring units; N, kg, lbs & oz. See our website for more details. PRICE: 265 UWE SHINKO KERN SOEHNLE FM FURI MISC CRANE MEDICAL

23 4 SOEHNLE WEIGHING EQUIPMENT Price List July SOEHNLE DIGITAL BENCH & FLOOR SCALES & 7756 SERIES LOW PROFILE PLATFORM SCALE Remote indicator with wall bracket and 1.5m cable. Four load cell platform. OPTIONAL CAPACITY kg DIVISION g PLATE mm SS SS x SS VET SCALE (no plate) EXTRAS Rechargeable Battery & Charger for 7755/ , 9121 & 9122 SERIES BASIC HIGH RESOLUTION COMPACT BENCH SCALE Easy one button operation. European adaptor supplied as standard. UK power adaptor available as an option Standard and Professional versions also available POA. OPTIONAL CAPACITY kg DIVISION g PLATE mm x x x EXTRAS RS UK power adaptor SERIES IP RATED BENCH SCALE IP65 with mains operation and IP67 with battery operation. Stainless steel plate and ABS housing. or CAPACITY kg DIVISION g PLATE mm x UWE SHINKO KERN SOEHNLE FM FURI MISC CRANE MEDICAL

24 5 FM SCALES Price List July FM SCALES FM180 SERIES APPROVED GENERAL PURPOSE BENCH AND FLOOR SCALE RS232 with customisable data output. Real time clock CAPACITY kg DIVISION g APPROVED DIVISION g PLATE mm FM180-B FM180-B FM180-B x FM180-B FM180-B FM180-F FM180-F x 400 FM180-F FM180-F FM180-L FM180-L x 500 FM180-L FM180-L FM180-XL FM180-XL x 600 FM180-XL FM180-XL x 500mm Back Rail (F, L & XL bases) EXTRAS SP Thermal Printer (with cable & PSU) DM SERIES HIGH RESOLUTION BENCH SCALE WITH NUMERIC KEYPAD 1:30,000 displayed resolution & 1:4,000,000 internal resolution. Real time clock. RS232 & multiple print formats. CAPACITY kg DIVISION g PLATE mm DM DM x 220 DM-15K DM-30K EXTRAS SP Thermal Printer (with cable & PSU) UWE SHINKO KERN SOEHNLE FM FURI MISC CRANE MEDICAL

25 5 FM SCALES Price List July AFM18 SERIES EC APPROVED BENCH AND FLOOR SCALE Up to 1:60,000 displayed resolution. RS232 & multiple print formats. CAPACITY kg APPROVED DIVISION g PLATE mm AFM18-B AFM18-B AFM18-B x AFM18-B AFM18-B AFM18-F AFM18-F x 400 AFM18-F AFM18-F AFM18-L AFM18-L x 500 AFM18-L AFM18-L AFM18-XL AFM18-XL x 600 AFM18-XL AFM18-XL EXTRAS 500 x 500mm Back Rail (F, L & XL bases) SP Thermal Printer (with cable & PSU) DC SERIES HIGH RESOLUTION BENCH COUNTING SCALE 1:30,000 displayed resolution. 1:1,600,000 internal resolution. Bi-directional RS232. CAPACITY kg DIVISION g COUNTING RESOLUTION g DC-3000L PLATE mm DC-6000L x 220 DC-15KL DC-30KL EXTRAS SP Thermal Printer (with cable & PSU) UWE SHINKO KERN SOEHNLE FM FURI MISC CRANE MEDICAL

26 6 FURI SCALES AND BALANCES Price List July DIGITAL BENCH & FLOOR SCALES FCS-A SERIES BENCH OR FLOOR SCALE WITH REMOTE INDICATOR Wall bracket as standard Four load cell base. CAPACITY kg DIVISION g PLATE mm FCS-A FCS-A x FCS-A EXTRAS Carry case FCW SERIES VETERINARY SCLAE WITH REMOVABLE RUBBER MAT Lifting handles and wheels on opposite end. CAPACITY kg DIVISION g PLATE mm FCW x 500 FCW FRH SERIES LOW COST BALANCE High and medium resolution models. 16 weighing units including dwt, ozt, ct and gn. Draft shield on 600g capacities. CAPACITY g DIVISION g PLATE mm FRH-600H dia FRH-6000H x FRH-600L dia FRH-6000L x UWE SHINKO KERN SOEHNLE FM FURI MISC CRANE MEDICAL

27 6 FURI SCALES AND BALANCES Price List July FEH SERIES LOW COST BENCH SCALE CAPACITY kg DIVISION g PLATE mm FEH x 140 FEH WPS SERIES IP65 RATED PORTION SCALE Stainless steel top housing. CAPACITY g DIVISION g PLATE mm WPS x 160 WPS UWE SHINKO KERN SOEHNLE FM FURI MISC CRANE MEDICAL

28 7 MISCELLANEOUS SCALES Price List July NAGATA BENCH SCALES FATH-12 SERIES RUGGED HIGH RESOLUTION BENCH SCALE 1:30,000 resolution. CAPACITY kg DIVISION g PLATE mm FATH-12-3KG FATH-12-6KG x 240 FATH-12-15KG FATH-12-30KG TW-30B SERIES IP66 WASHDOWN BENCH SCALE Plastic goods plate. Optional stainless steel pan (no extra cost). CAPACITY kg DIVISION g PLATE mm TW-30B TW-30B TW-30B x TW-30B TW-30B KAIN CHUNG TOP LOADING DIAL SCALES KAIN CHUNG TK TOP LOADING DIAL SCALE Simple mechanical dial scale. Metal housing and heavy duty construction. Rack & pinion movement. CAPACITY kg DIVISION g PLATE mm DIAL mm T-2K T-5K x T-10K T-20K x T-25K x T-50K x PICK & MIX mm dia SCALE & 2lb & ¼ oz. bowl UWE SHINKO KERN SOEHNLE FM FURI MISC CRANE MEDICAL

29 7 MISCELLANEOUS SCALES Price List July 2014 SECTION 7.3 YANTAI BENCH SCALES SUPER SS-6 SERIES IP68 STAINLESS STEEL SCALE WITH REAR DISPLAY Selectable resolution up to 1:15,000. Rear display can be disabled. CAPACITY kg DIVISION g PLATE mm SS SS SS x SS SS EXTRAS 110V PSU TCS SERIES CORROSION RESISTANT BENCH AND FLOOR SCALES Plastic coated steel sub-frame & encapsulated aluminium load cell. Selectable displayed resolution up to 1:15,000. CAPACITY kg DIVISION g PLATE mm TCS-B TCS-B x 300 TCS-B TCS-B TCS-F TCS-F x 400 TCS-F TCS-F UWE SHINKO KERN SOEHNLE FM FURI MISC CRANE MEDICAL

30 7 MISCELLANEOUS SCALES Price List July OHAUS BENCH SCALES NAVIGATOR XT SERIES APPROVED MULTPURPOSE TOUCH-FREE PORTABLE BALANCE ABS plastic with stainless steel plate. Optional RS232. USB or Ethernet interface. CAPACITY kg RECOMMENDED NON-APPROVED DIVISION g OPTIONAL APPROVED DIVISION g PLATE mm NVT1601M NVT3200M x 174 NVT6400M NVT16000M Rechargeable Battery Kit RS232 Interface Kit EXTRAS USB Interface Kit Ethernet Interface Kit Dust Cover RANGER 3000 SERIES APPROVED COMPACT BENCH SCALE ABS plastic with stainless steel plate. Optional USB, Ethernet interface or 2 nd RS232 Dynamic weighing function. Transportation handle and integral under-weighing hook. CAPACITY kg RECOMMENDED NON-APPROVED DIVISION g APPROVED DIVISION g OPTIONAL PLATE mm R31P1502-M R31P3-M R31P6-M x R31P15-M R31P30-M nd RS232 Interface Kit EXTRAS USB Interface Kit Ethernet Interface Kit Dust Cover Prices exclude delivery, VAT and stamping fees (unless stated) UWE SHINKO KERN SOEHNLE FM FURI MISC CRANE MEDICAL

31 7 MISCELLANEOUS SCALES Price List July VALOR 2000 SERIES IP68 STAINLESS STEEL BENCH SCALE Rear LED display. Polycarbonate keypad that can endure contact with knives and sharp instruments. CAPACITY kg DIVISION g PLATE mm V22XWE1501T V22XWE3T x 190 V22XWE6T V22XWE15T VALOR 4000 SERIES IP68 APPROVED STAINLESS STEEL BENCH SCALE Rear LED display. Polycarbonate keypad that can endure contact with knives and sharp instruments. Touchless sensor for tare function. CAPACITY kg RECOMMENDED NON-APPROVED DIVISION g APPROVED DIVISION g PLATE mm V41XWE1501T V41XWE3T x 190 V41XWE6T V41XWE15T Prices exclude delivery, VAT and stamping fees (unless stated) UWE SHINKO KERN SOEHNLE FM FURI MISC CRANE MEDICAL

32 8 CRANE SCALES Price List July UWE SUSPENDED & CRANE SCALES HS SERIES SIMPLE LOW CAPACITY HANGING SCALE 250 hrs battery operation. Hold function. Options: 290mm diameter stainless steel pan & pan support. OPTIONAL CAPACITY kg DIVISION g OVERALL HEIGHT mm HS HS without pan HS-15K HS-30K with pan EXTRAS Extra for Stainless Steel Pan and Support Mains Adaptor CCS SERIES LOW CAPACITY CRANE SCALE WHILE STOCKS LAST Hold function. Remote keypad. ABS plastic housing. Safety hook. Proof load test & calibration included. CAPACITY kg DIVISION g OVERALL HEIGHT mm CCS-60K CCS-150K CCS-600K ACS SERIES APPROVED HEAVY DUTY CRANE SCALE 360º free rotating hook (up to 3t). Hold function. Supplied with remote control, battery charger, proof load and calibration certificate. Stamping fee included. CAPACITY kg DIVISION g OVERALL HEIGHT mm ACS ACS-1.5T ACS-3T ACS-6T UWE SHINKO KERN SOEHNLE FM FURI MISC CRANE MEDICAL

33 8 CRANE SCALES Price List July KERN HANGING SCALES HDB HANGING SCALE LIGHT WEIGHT HANGING SCALE WITH HOLD FUNCTION Plastic housing with stainless steel hook. CAPACITY kg DIVISION g HDB 5K HDB 10K CH HANGING SCALE HANGING SCALE WITH INTEGRAL TAPE MEASURE (1000mm) Either manual or automatic hold function. Plastic housing. CAPACITY kg DIVISION g CH 15K CH 50K CH 50K HCB & HCN HANGING SCALE SIMPLE HANGING SCALE WITH HOLD FUNCTION HCB plastic housing. HCN stainless steel housing. Stainless steel safety catch and S hook. Peak hold function Second display standard on the HCN. Weighing units include Newtons. CAPACITY kg DIVISION g HCB 20K HCB 50K HCB 100K HCB 200K HCN 20K50IP HCN 50K100IP HCN 100K200IP HCN 200K500IP HCN UWE SHINKO KERN SOEHNLE FM FURI MISC CRANE MEDICAL

34 8 CRANE SCALES Price List July NAGATA CRANE SCALES HTB SERIES IP65 LOW CAPACITY HANGING SCALE WITH DOUBLE SIDED DISPLAY ABS plastic housing. Hold function. Price includes 340mm diameter stainless steel pan. CAPACITY kg DIVISION g OVERALL HEIGHT mm HTB HTB HTB HTR SERIES LOW CAPACITY IP65 CRANE SCALE ABS plastic housing with IP65 rating. HTR/60 & 150 feature an open stainless steel hook without safety clasp. Higher capacity models feature hook as shown. Hold function. Prices include charger, proof load test & calibration certificate. OVERALL CAPACITY kg DIVISION g HEIGHT mm HTR HTR HTR HTR HJS-33 SERIES GENERAL PURPOSE CRANE SCALE Aluminium alloy housing Safety overload of 250% capacity. Prices include charger, remote control & proof load test & calibration certificate. OVERALL CAPACITY kg DIVISION g HEIGHT mm HJS HJS HJS HJS UWE SHINKO KERN SOEHNLE FM FURI MISC CRANE MEDICAL

35 8 CRANE SCALES Price List July HJM-33 SERIES CRANE SCALE GENERAL PURPOSE CRANE SCALE Aluminium alloy housing Safety overload of 250% capacity. Prices include charger, remote control & proof load test & calibration certificate. OVERALL CAPACITY kg DIVISION g HEIGHT mm HJM-33-3T HJM-33-5T HJM-33-10T HIGHER CAPACITIES & FOUNDRY S AVAILABLE PLEASE CALL FOR DETAILS TR-03 SERIES CRANE SCALE WITH WIRELESS REMOTE DISPLAY Two models of transmitting scales and a range of receiving remote wireless units. Aluminium alloy housing. Operating frequency mhz. Transmitting distance up to 100m. Prices include charger, remote control & proof load test & calibration certificate. HJM HJS CAPACITY DIVISION OVERALL HEIGHT mm TR-HJS-03/1.5T 1.5T 500g TR-HJS-03/2T 2T 1kg TR-HJS-03/2.5T 2.5T 1kg TR-HJM-03/3T 3T 1kg TR-HJM-03/5T 5T 2kg TR-HJM-03/10T 10T 5kg TR-HJM-03/15T 15T 5kg TR-1005A TR-1010A TR-1018A TR-1023A TR-1040A TR-1106A DESCRIPTION TR-1005A Battery handheld RF weight indicator. 12mm backlit LCD display TR-1010A Mains tabletop RF weight indicator. 25mm backlit LCD display & RS TR-1015A Mains tabletop RF weight indicator. 38mm backlit LCD display & RS TR-1018A Mains wall mounted display RF weight indicator. 45mm red LED display, RS232 & remote control TR-1023A Mains wall mounted display RF weight indicator. 58mm red LED display, RS232 & remote control TR-1040A Mains wall mounted display RF weight indicator. 100mm red LED display, RS232 & remote control TR-1106A Mains printer type RF weight indicator. 25mm backlit LCD display & RS UWE SHINKO KERN SOEHNLE FM FURI MISC CRANE MEDICAL

36 9 MEDICAL AND PERSONAL SCALES Price List July UWE PERSONAL SCALES UWE BW-150 NON-APPROVED PERSONAL SCALE FOR NON-PRESCRIBED APPLICATIONS ONLY Detachable indicator can be attached to the base, a wall or a pillar. Kg, decimal lbs, stones, lbs & oz. (selectable by mode key). Selectable hold function. Optional pole kit available (as pictured for the ABW). Please specify at time or ordering. CAPACITY kg DIVISION g PLATE mm BW kg 420lbs 0-20stone 20-30stone 0.1kg 0.2lbs lbs x 2oz lbs x 8oz 330 x EXTRA Pole Kit UWE ABW-150 EC CLASS III APPROVED PERSONAL SCALE Detachable indicator can be attached to the base, wall or pillar. Optional pole kit available (as pictured). Please specify at time of ordering. CAPACITY kg DIVISION g PLATE mm ABW kg 50g 330 x EXTRA Pole Kit UWE SHINKO KERN SOEHNLE FM FURI MISC CRANE MEDICAL

37 9 MEDICAL AND PERSONAL SCALES Price List July SOEHNLE MEDICAL SCALE SOEHNLE MEDICAL SCALES FOR INTERNAL USE 7850 FITNESS SCALE WITH PRINTER 7830 WAIST HIGH PERSONAL SCALE 7870 PORTABLE SCALE WITH CASE 7872 CHAIR SCALE 7871 CHAIR WEIGHER 8310 BABY SCALE 8320 FOLDING SCALE BABY 5003 FOLDING HEIGHT ROD CAPACITY kg DIVISION g DIMENSIONS mm x 490 x x 490 x x x 1100 x x x 240 x x 315 x 53 open cm 1cm 345 x 92 x SOEHNLE CLASS III APPROVED MEDICAL SCALES 7730 APPROVED WAIST HIGH PERSONAL SCALE 7770 APPROVED PERSONAL SCALE WITH CASE 7708 APPROVED HIGH CAPACITY SCALE 7772 APPROVED WHEELCHAIR SCALE 7771 CHAIR WEIGHER 7711 APPROVED BLUETOOTH BED WEIGHER 7725 APPROVED BABY SCALE CAPACITY kg DIVISION g DIMENSIONS mm / x 490 x / x x 880 x / x 1100 x x 890 x / x 470 x /5 600 x 355 x Stamping fees are included for all approved Soehnle medical scales. For further information please see our website UWE SHINKO KERN SOEHNLE FM FURI MISC CRANE MEDICAL

38 9 MEDICAL AND PERSONAL SCALES Price List July KERN MEDICAL SCALES MBC BABY SCALE MBE BABY SCALE MPE PERSONAL SCALE MPC PERSONAL SCALE MPB PERSONAL SCALE MFB BODY FAT SCALE MTS HANDRAIL SCALE MXS ADIPOSITY SCALE MWS WHEELCHAIR PLATFORM SCALE MCC CHAIR SCALE MCB CHAIR SCALE CAPACITY kg DIVISION g PLATE mm MBC 15K2DM 6/15 2/5 600 x MBC 20K10M x MBE 10K x MPE 250K100PM x MPE 250K100HM x MPC 250K100M x MPB 300K x MPB 300K100P x MFB 150K x MTS 300K100M x MXS 300K100M x MWS 300K100M x MCC 250K100M x 990 x MCB 300K100M x 850 x Stamping fees are included for all Kern Medical Scales. For further information please see our website UWE SHINKO KERN SOEHNLE FM FURI MISC CRANE MEDICAL

39 10 PLATFORMS, WEIGHBEAMS & Price List July PLATFORMS, WEIGHBEAMS & FW RANGE POWDER COATED MILD STEEL PLATFORMS 4 OIML R60 C3 approved IP67 mild steel load cells Load cell cables and junction box located within fabrication. Removable side plate for easy access to junction box with summing board. Threaded eyebolt holes for easy lifting. Other capacities and sizes available, POA. PLATFORM SIZE mm MAXIMUM CAPACITY kg TOTAL LOAD CELL CAPACITY kg FW x 800 x FW x 1000 x FW x 1200 x FW x 1500 x FW x 1200 x FW x 2000 x FW-RP x 620 Mild steel ramp FW-RP x 620 Mild steel ramp FW-RP x 750 Mild steel ramp FW-RP x 750 Mild steel ramp EXTRAS ATEX load cells stainless steel IP67 c/w feet SB-S RANGE ALL STAINLESS STEEL PLATFORMS Fitted with stainless steel IP68 C3 load cells. Load cell cables and stainless steel junction box located within fabrication. Removable side plate for easy access to junction box with summing board. Threaded eyebolt holes for easy lifting. PLATFORM SIZE mm MAXIMUM CAPACITY kg TOTAL LOAD CELL CAPACITY kg SB-S x 800 x SB-S x 1000 x SB-S x 1200 x SB-S x 1500 x SB-S-RP x 620 Stainless steel ramp SB-S-RP x 620 Stainless steel ramp SB-S-RP x 750 Stainless steel ramp EXTRAS ATEX load cells stainless steel IP67 c/w feet DT RANGE POWDER COATED MILD STEEL DRIVE THROUGH PLATFORM Ultra low profile with integral ramps. IP67 R60 approved mild steel load cells. WORKING AREA mm FOOTPRINT mm MAXIMUM CAPACITY kg TOTAL LOAD CELL CAPACITY kg DT x x 990 x DT x x 1240 x DT x x 1400 x EXTRAS ATEX load cells stainless steel IP67 c/w feet Prices exclude delivery, VAT and stamping fees (unless stated) PRINTER &

40 10 PLATFORMS, WEIGHBEAMS & Price List July LP-S RANGE ALL STAINLESS STEEL DRIVE THROUGH PLATFORM Fitted with stainless steel IP68 C3 load cells. Ultra low profile with integral ramps. No cost option stop bar (please specify at time of order). WORKING AREA mm FOOTPRINT mm MAXIMUM CAPACITY kg TOTAL LOAD CELL CAPACITY kg LP-S x x 990 x LP-S x x 1240 x LP-S x x 1400 x EXTRAS ATEX load cells stainless steel IP67 c/w feet WB-M RANGE POWDER COATED MILD STEEL MEDIUM DUTY WEIGH BEAMS Single hand grip. Recessed end to protect load cell cable socket. IP67 steel load cells. Beam width 140mm. 120mm diameter rubber feet. Each beam weighs 20kg. PLATFORM SIZE mm MAXIMUM CAPACITY kg TOTAL LOAD CELL CAPACITY kg WB-M-3T 1200 x 140 x WB-H RANGE POWDER COATED MILD STEEL HEAVY DUTY WEIGH BEAMS Single hand grip. Recessed end to protect load cell cable socket. IP67 steel load cells. Beam width 150mm. 120mm diameter rubber feet. Heavy duty construction, each beam weighs 29kg. PLATFORM SIZE mm MAXIMUM CAPACITY kg TOTAL LOAD CELL CAPACITY kg WB-H-3T 1200 x 150 x WB-S RANGE ALL STAINLESS STEEL WEIGH BEAMS Single hand grip. Recessed end to protect load cell cable socket. Stainless steel IP68 non approved load cells. Beam width140mm. 120mm diameter rubber feet. Heavy duty construction, each beam weighs 20kg. PLATFORM SIZE mm MAXIMUM CAPACITY kg TOTAL LOAD CELL CAPACITY kg WB-S-3T 1200 x 140 x Prices exclude delivery, VAT and stamping fees (unless stated) PRINTER &

41 10 PLATFORMS, WEIGHBEAMS & Price List July UF RANGE POWDER COATED MILD STEEL U FRAME Single hand grip. Wheels for easy transportation. IP67 steel load cells. Beam width 120mm. Height 90mm. Interior opening 600mm. MAXIMUM CAPACITY kg TOTAL LOAD CELL CAPACITY kg UF-3T UF-S RANGE ALL STAINLESS STEEL U FRAME Single hand grip. Wheels for easy transportation. Stainless steel IP68 load cells. Beam width 120mm. Height 90mm. Interior opening 600mm. MAXIMUM CAPACITY kg TOTAL LOAD CELL CAPACITY kg UF-S-3T TA TRUCK SCALE MILD STEEL PALLET TRUCK SCALE Heavy duty construction. IP67 mild steel load cells. Lifting height mm. Forks 1180 x 190mm (l x w). Interior opening 240mm. MAXIMUM CAPACITY kg DIVISION kg TOTAL LOAD CELL CAPACITY kg TA Prices exclude delivery, VAT and stamping fees (unless stated) PRINTER &

42 10 PLATFORMS, WEIGHBEAMS & Price List July FM RANGE HEAVY DUTY SINGLE LOAD CELL IP65 R60 approved aluminium load cell. Sub-frame painted steel fabrication. Stainless steel goods plate. Supplied complete with stainless steel column & column to base bracket. Column bracket can be mounted on long side only. Ball table (RT) version available (without bracket or column). PLATFORM SIZE mm MAXIMUM CAPACITY kg LOAD CELL CAPACITY kg FM-B FM-B FM-B x 300 x FM-B FM-B FM-F FM-F x 400 x 140 FM-F FM-F FM-L FM-L x 500 x 140 FM-L FM-L FM-XL FM-XL x 600 x 140 FM-XL FM-XL RT-F x 420 x RT-F x 500 x EXTRAS 500 x 500mm Back Rail Top Bracket ATEX-B stainless steel IP67 - all capacities ATEX-F aluminium IP67 - all capacities ATEX-F/L/XL stainless steel IP68 - up to 150kg weighing capacity ATEX-F/L/XL stainless steel IP68 - above 150kg weighing capacity Prices exclude delivery, VAT and stamping fees (unless stated) PRINTER &

43 10 PLATFORMS, WEIGHBEAMS & Price List July FM-S RANGE ALL STAINLESS STEEL SINGLE LOAD CELL Heavy duty construction. C3 approved stainless steel load cells. Column & brackets optional extras. PLATFORM SIZE mm MAXIMUM CAPACITY kg LOAD CELL CAPACITY kg IP RATING SP SP x 300 x SP SB SB x 300 x SB SF SF x 400 x SF SL SL x 500 x SL Standard Column (340mm) with Bracket for SB Low Column (25mm) with Extended Bracket Standard Column (340mm) with Bracket for SF & SL EXTRAS 500 x 500mm Back Rail Top Bracket ATEX-SB stainless steel IP67 -all capacities ATEX- SF & SL stainless steel IP68 - all capacities SOEHNLE SERIES HINGED STAINLESS STEEL PLATFORMS All stainless steel construction. Gas filled strut pressure tube painted in black (stainless steel version available as option) IP68 stainless steel C3 approved load cells. Corrosion resistant terminal box. Versions for free standing or dormant applications. Available with smooth or chequered goods plate. Optional pit frame, free standing installation kits and ramps - POA ATEX (zone 2 & 22) version available - POA. PLATFORM SIZE mm CAPACITY kg TOTAL LOAD CELL CAPACITY kg OPTIONAL x x x Prices exclude delivery, VAT and stamping fees (unless stated) PRINTER &

44 11 Price List July UWE UWE WSK INDICATOR STAINLESS STEEL INDICATOR WITH MULTI-SEGMENT CHECKWEIGHER FUNCTIONALITY IP67 rating. Alpha numeric keypad for entry of operator and lot numbers. Date and time. Supplied with wall bracket. MAXIMUM RESOLUTION MAXIMUM WSK/IND 30, UWE ATM INDICATOR LARGE DISPLAY CLASS III APPROVED INDICATOR Dual range available for non-stamped applications. MAXIMUM RESOLUTION APPROVED RESOLUTION MAXIMUM ATM/IND 30,000 3, EXTRAS Wall or Pole Bracket UWE W22 INDICATOR MULTI-FUNCTION INDICATOR WITH OPTIONAL INTEGRAL PRINTER Dual range capability. Alphanumeric lot or serial number entry. RS232 with date & time output. UTP compatible. MAXIMUM RESOLUTION MAXIMUM W22 30, Built-in Tally Roll Printer EXTRAS Wall or Pole Bracket UWE APC INDICATOR CLASS III APPROVED COUNTING INDICATOR. 1:190,000 internal resolution. Negative sampling & counting. Automatic piece weight enhancement. Dual range available for non-stamped applications. UTP compatible. Supplied complete with wall bracket. Optional table stand. MAXIMUM RESOLUTION APPROVED RESOLUTION MAXIMUM APC 15,000 3, EXTRAS Table Stand PRINTERS &

45 11 Price List July FM FM180 INDICATOR GENERAL PURPOSE APPROVED LOW COST INDICATOR 1:1,600,000 internal resolution. Real time clock. Supplied with bracket for wall, bench and column mounting. MAXIMUM RESOLUTION MAXIMUM FM180 50, EXTRAS SP Thermal Printer (with cable & PSU) FM28 INDICATOR GENERAL PURPOSE HIGH RESOLUTION INDICATOR WITH FULL NUMERIC KEYPAD Up to 1:3,200,000 internal resolution. Real time clock. Supplied with bracket for wall, bench and column mounting. MAXIMUM RESOLUTION MAXIMUM FM28 60, Relay Output (external board only) EXTRAS SP Thermal Printer (with cable & PSU) Stack light fitted complete with relay output (mains only) AFM18 INDICATOR GENERAL PURPOSE CLASS III APPROVED INDICATOR WITH FULL NUMERIC KEYPAD Approved up to 1:10,000. Up to 1:60,000 displayed weight resolution non-stamped. 1:1,600,000 internal resolution. Supplied with brackets for wall, bench and column mounting. MAXIMUM RESOLUTION MAXIMUM AFM18 60, EXTRAS SP Thermal Printer (with cable & PSU) PRINTERS &

46 11 Price List July FM180 S INDICATOR APPROVED MULTIPLE FUNCTION STAINLESS STEEL INDICATOR Up to 1:600,000 internal resolution. Real time clock. Supplied with bracket for wall or bench mounting. MAXIMUM RESOLUTION MAXIMUM FM180 S 60, Top bracket for column mounting EXTRAS SP Thermal Printer (with cable & PSU) FM18 S INDICATOR APPROVED STAINLESS STEEL INDICATOR WITH FULL NUMERIC KEYPAD Up to 1:600,000 internal resolution. Supplied with bracket for wall or bench mounting. MAXIMUM RESOLUTION MAXIMUM FM18 S 60, Top bracket for column mounting EXTRAS Relay Output (external board only) SP Thermal Printer (with cable & PSU) Stack light fitted complete with relay output (mains only) PRINTERS &

47 11 Price List July RINSTRUM SERIES R320 R323 X320 D320 REMOTE DISPLAY D323 REMOTE DISPLAY EC CLASS III APPROVED Maximum resolution 30,000. Approved division 4,000. Stainless steel swivel bracket option for pole or wall mounting. R320 and R323 optional date & time and two isolated outputs and RS232. X320 includes 3 isolated outputs and RS232 with configurable printing. D320 & D323 are remote displays. OPTIONS X320 DESCRIPTION R320 * Panel mount, ABS, VDC R323-B * Panel mount, stainless steel, VDS R323-C * Complete stainless steel enclosure, IP65, vdc R323-D * Complete stainless steel enclosure, IP65, vac R323-F * Complete stainless steel enclosure, IP65, 2.5ah Nimh battery X320-C IP69k housing, VDC X320-D IP69k housing, VAC X320-F IP69k housing, 2.5ah Nimh battery D320 Remote display, ABS housing D323 Remote display, stainless steel housing * APPLICATIONS FOR R320 & R323 S K342 Basic, weigh only & hold function key 0.00 K344 As K342 plus RS232 with basic printing K354 As K344 plus single input, clock, custom printing and configurable function key K356 As K354 plus 2 setpoints and 2 outputs (up to 300 ma/50 Vdc) PRINTERS &

48 11 Price List July R400 SERIES R420 R423-C/D/F R423-A PANEL MOUNT MULTIFUNCTION CLASS III APPROVED INDICATOR Up to 32 I/O control points. Large LCD two line display 29mm and 18mm with LED backlight. Application software for counting, product storage and batching. Up to 100,000 division resolution. Approved divisions 10,000. Optional desk or wall mount brackets. R420 abs housing panel mount. Front face has an IP65 rating. R423 is the stainless steel version, available either with a complete stainless steel IP65 enclosure or as a panel mount version with IP65 rated front face. Battery packs and mains adaptors available as optional extras. OPTIONS R423 DESCRIPTION R420 Panel mount, abs, VDC R423-A Panel mount, stainless steel, VDC R423-C Complete stainless steel enclosure, VDC R423-D Complete stainless steel enclosure indicator, VAC R423-F Complete stainless steel enclosure indicator, 2.5ah Nimh battery APPLICATIONS K product data storage K410 Filling application, 100 recipe memory K411 Batching application, 100 recipe memory K481 Summing application, up to 4 subtotals FOC PRINTERS &

49 11 Price List July OPTIONS FOR RINSTRUM * PART NUMBER DESCRIPTION All A10002 Mains adaptor A10005 Opto link rs A10012 Opto link usb A10018 Pole mount insert S R310 & R320 M3001 Desk stand (also holds 4 x AA batteries) M3002 Desk stand bracket M3003 IP65 rear cover M3005 Dust cover (pack of 10) M3009 Seal 6.00 M3102 Rechargeable battery pack with stand (no IP rating) M3103 Rechargeable battery pack IP65 with stand Pole mount kit (requires either desk stand, IP65 rear cover or either of the rechargeable M A10018 batteries with stands) R323 M3010 Desk / wall bracket M3009 Seal 6.00 S R420 & R423 M4001 Desk stand M4003 Stainless steel wall mount M4004 Pole mount kit M4005 Dust cover (pack of 10) M4009 Seal 6.00 M4102 Rechargeable battery pack IP M4112 IP65 desk mount VAC power supply M4201 RS module M4202 RS232/rs485 module M4203 RS485/485 module M43X1 Digital 8 channel I/O module M button input module Analogue output module (provides one isolated (>500v) 4-20ma or 0-10V analogue M4401 output) M4501 Data storage device M4901 Relay output kit M4902 Connection cable for i/o to relay output M4903 Converter (0-10v/4-20ma input) M4221 Ethernet module * Please note options do not include carriage but will be sent with no carriage of charge if ordered at the same time as an indicator. PRINTERS &

50 11 Price List July OHAUS SERIES BASIC APPROVED INDICATOR Up to 20,000 division resolution. Approved divisions 6,000. T31P T32ME & T32MC OR T32XW T31P DESCRIPTION T32ME T32MC T32XW EXTRAS ABS housing. Reversible rear housing for cable to exit above or below indicator. Optional wall mounting kit ABS front panel with painted carbon steel rear housing and mounting bracket. LED display ABS front panel with painted carbon steel rear housing and mounting bracket. LCD display IP65 stainless steel housing with hinged front cover for easy servicing T31P Wall Mount Kit painted steel T32XW Wall Mount Kit stainless steel SERIES APPROVED MULTIFUNCTION INDICATOR LCD display with 3 colour checkweigh LED. Up to 30,000 divisions resolution. Approved divisions 10,000. Dynamic weighing. Time and date optional RS422/485, AC/DC relay and 2 nd RS232. OPTIONS DESCRIPTION T51P ABS housing. Mains or disposable batteries IP66 stainless steel housing with hinged front cover for T51XW easy servicing. Optional rechargeable battery T51P Wall Mount Kit EXTRAS T51XW Wall Mount Kit Rechargeable Battery Kit nd RS232 Interface Kit Prices exclude delivery, VAT and stamping fees (unless stated) PRINTERS &

51 11 Price List July SERIES APPROVED MULTIFUNCTIONAL INDICATOR LCD display with alphanumeric line and 3 colour checkweigh LED. Up to 50,000 division resolution. Approved divisions 10, record library. Optional Alibi Memory providing 262,000 records Time and date and dynamic weighing function. Optional RS422/485, AC/DC relay and 2 nd RS232. Alphanumeric keypad. Hinged front cover for easy servicing. OPTIONS DESCRIPTION T71P ABS housing T71XW IP66 rated stainless steel housing T71P Wall Mount Kit T71XW Wall Mount Kit EXTRAS Rechargeable Battery Kit nd RS232 Interface Kit Alibi Memory Kit POA CKW55 INDICATOR IP66 APPROVED STAINLESS STEEL CHECKWEIGHING INDICATOR 24 segment traffic light LED bar graph Up to 20,000 division resolution. Approved divisions 10,000. Basic statistics and 20 part library. Internal universal power supply or optional internal NiMH rechargeable battery. Optional RS422/485 and AC/DC outputs. OPTIONS DESCRIPTION CKW55 IP66 rated stainless steel housing EXTRAS Wall Mount Kit Rechargeable Battery Kit Prices exclude delivery, VAT and stamping fees (unless stated) PRINTERS &

52 12 Price List July INDUSTRIAL STAINLESS STEEL INDUSTRIAL AVAILABLE WITH A RANGE OF STANDARD PROGRAMS Approved up to 6000 divisions. Available in standard enclosure or panel mount versions. Options for serial interface, digital I/O and analog outputs. IP69K rating for standard enclosures and IP67 for panel mount versions IT1000 INDICATOR ROBUST IP69K STAINLESS STEEL APPROVED INDUSTRIAL INDICATOR Standard programs for checkweighing, 1 & 2 speed filling using optional I/O module. Date & time clock optional extra. OPTIONAL DESCRIPTION IT1000 Standard Enclosure VAC IT1000 Standard Enclosure VDC, Panel Mount VAC and VDC IT1000 Accu Standard Enclosure with Integrated Rechargeable Battery and Charger IT3000 INDICATOR ROBUST IP69K STAINLESS STEEL APPROVED INDUSTRIAL INDICATOR WITH NUMERIC KEYPAD Standard programs include parts counting, checkweighing, filling, remote controlled systems and truck weighing. Online mode allowing indicator to be controlled remotely from PC. AP version with Profibus DP as standard. OPTIONAL IT3000M DESCRIPTION IT3000M Package Standard Enclosure or Panel Mount VAC VDC IT3000AP Package Standard Enclosure or Panel Mount VAC VDC PRINTERS &

53 12 Price List July PROGRAMMABLE A RANGE OF APPROVED STAINLESS STEEL PROGRAMMABLE WITH COLOUR TFT DISPLAY Standard enclosure with IP69K rating or panel mount versions with IP65 rating. Mains VAC or VDC versions available Ethernet and USB standard and additional modular hardware allow a wide range of options including serial interface, WLAN, digital I/O and analog outputs. Standard prices include analog scale module. Dual scale, digital and external scale modules available. Range of factory programs IT4000E INDICATOR ADVANCED INDICATOR WITH STANDARD FACTORY APPLICATIONS BASIC/COUNT program ideal for parts counting, checkweighing, PLU (up to 10 products), up to six user defined fields. Other factory programs include CONTROL/ONLINE, DOS for filling and TRUCK/ONLINE. DESCRIPTION IT4000E Package Standard Enclosure VAC Standard Programs Basic/Count, Control/Online, DOS, Truck/Online FOC IT6000E AND IT8000E IT6000E IT8000E IT6000ET & IT8000ET FREELY PROGRAMMABLE INDICATOR WITH A WIDE RANGE OF STANDARD FACTORY PROGRAMS OR CUSTOM APPLICATIONS Standard factory programs include BAG, BASIC/COUNT, BATCH, BIG BAG, BULK, CHECK, CONTROL/ONLINE, FILL, LOSS IN WEIGHT, SQC AND TRUCK/ONLINE. ET models with touchscreen display. DESCRIPTION IT6000E Package Standard Enclosure VAC IT6000ET Package Standard Enclosure VAC Touch Screen IT8000E Package Standard Enclosure VAC IT8000ET Package Standard Enclosure VAC Touch Screen Standard Programs Bag, Basic/count, Batch, Big Bag, Bulk, Check, Control/Online, Fill. Loss in Weight, SQC and Truck/Online PRINTERS &

54 12 Price List July MODULES AND OPTIONS IT2000 WEIGHING MODULE DIN RAIL MOUNTED PROCESS CONTROLLER Ideal for process control applications. Up to 30,000 division resolution, approved up to 6000 divisions. Integrated batching functionality. Integrated factory calibrated A/D converter to connect up to 8 load cells. Stainless steel housing designed for installation on DIN rail. Profibus DP interface as standard. Power supply VDC. DESCRIPTION IT2000 IT2000 Weighing Module OPTIONS A range of options available for the Systec industrial and programmable indicators. More options are available, please contact us with specific enquiries. DESCRIPTION Splash Guard Wet Cover IT1000 Clock IOM I/O Module (IT1000 only) 1 in / 3 out 24 VDC SIM RS232, SIM RS485.4 or SIM RS485.2 Serial Interface options SIM-RJ45 Ethernet Interface Module (IT3000M) PIM I/O Module 2 In / 2 out 24 VDC DAU15 Analog Output Module 0-20mA / 0-10 VDC ADM, Analog Scale Interface Dual-ADM, Dual Scale Interface (n/a for IT1000) SPU, IT8000E Interface Expansion Module USB Socket Type A WLX, WLAN Module (IT4000E, IT6000E(T), IT8000E(T)) Relay/Transistor Module 8 I/O (RS485 module included, no power supply or enclosure) Relay/Transistor Module 8 I/O (RS485 module and power supply included, no enclosure) Relay/Transistor Module 8 I/O (RS485 module and power supply included all in a stainless steel enclosure) STANDARD PROGRAMS APPLICATION IT1000 IT3000 IT 4000E IT6000E IT 8000E Filling FILL FILL DOS E FILL, BAG & BIG BAG Data logging / Data transmission BASIC BASIC BASIC/COUNT BASIC/COUNT Multi material batching BATCH Static Checkweighing CHECK CHECK BASIC/COUNT BASIC/COUNT Dynamic Checkweighing CHECK Parts counting COUNT COUNT BASIC/COUNT BASIC/COUNT Loss in weight Control LOSS IN WEIGHT Remotely Controlled ONLINE ONLINE CONTROL/ONLINE CONTROL/ONLINE SQC / Average Weight SQC Weighbridge TRUCK/ONLINE TRUCK/ONLINE TRUCK/ONLINE Product Lookup BASIC/COUNT (10 items) BASIC/COUNT (1000 items) PRINTERS &

55 12 Price List July HAZARDOUS AREA A RANGE OF HAZARDOUS AREA SUITABLE FOR ZONES 1/21 AND ZONES 2/22. Stainless steel indicator with ATEX approval. Approved resolution of up to 6000 divisions. Available in standard enclosure or panel mount versions. Price includes Analog Scale Module. ZONE 2/ IT1000 EX2/22 INDICATOR ROBUST STAINLESS STEEL ATEX RATED INDUSTRIAL INDICATOR Standard programs for checkweighing and 1 & 2 speed filling using optional I/O module. Date & time clock optional extra. Mains VAC or VDC versions available. Standard programs include BASIC, COUNT, FILL, CHECK and ONLINE. OPTIONAL DESCRIPTION IT1000 EX2/22 Standard Enclosure VAC or VDC Panel Mount VAC or VDC IT3000A EX & IT3000E EX2/22 ROBUST STAINLESS STEEL ATEX RATED INDUSTRIAL INDICATOR WITH NUMERIC KEYPAD Mains VAC or VDC versions available. Standard applications include BASIC, COUNT, CHECK, FILL, ONLINE and TRUCK/ONLINE. E Version includes integrated Ethernet interface. DESCRIPTION IT3000A EX2/22 IT3000E EX2/22 Standard Enclosure VAC or VDC Panel Mount VAC or VDC Standard Enclosure VAC or VDC Panel Mount VAC or VDC PRINTERS &

56 12 Price List July IT8000 EX 2/22 ATEX RATED FREELY PROGRAMMABLE INDICATOR Mains VAC or VDC versions available. Freely programmable indicator with a wide range of standard factory programs or custom applications. Analog or digital scale inputs available. Standard programs include, BAG, BASIC, BATCH, BIGBAG, BULK, CHECK, FILL, FLOW CONTROL, ONLINE, ONLINE OP AND TRUCK/ONLINE. Prices include Analog Scale Module. DESCRIPTION IT8000 EX 2/22 Standard Enclosure and Panel Mount Version VAC IT8000 EX 2/22 Standard Enclosure and Panel Mount Version VDC IT4000E EX 2/22 ATEX RATED PROGRAMMABLE INDICATOR Offers all the same factory applications and options as the standard indicator range. Mains VAC or VDC versions available. Configurable indicator with a wide range of standard factory programs Analog or digital scale inputs available. Standard programs include, BASIC/COUNT, CONTROL/ONLINE, DOS, AND TRUCK/ONLINE. Prices include Analog Scale Module. DESCRIPTION IT4000 EX 2/22 Standard Enclosure and Panel Mount Version VAC IT4000 EX 2/22 Standard Enclosure and Panel Mount Version VDC IT6000E AND IT8000E EX 2/22 ATEX RATED FREELY PROGRAMMABLE INDICATOR Offers all the same factory applications and options as the standard indicator range. Mains VAC or VDC versions available. Freely programmable indicator with a wide range of standard factory programs or custom applications. Analog or digital scale inputs available. Standard programs include, BAG, BIGBAG, BASIC/COUNT, BATCH, BULK, CHECK, FILL, LOSS IN WEIGHT, CONTROL/ONLINE, ONLINE OP, SQC AND TRUCK/ONLINE. Prices include Analog Scale Module. DESCRIPTION IT6000E EX 2/22 Standard Enclosure and Panel Mount Version VAC IT6000E EX 2/22 Standard Enclosure and Panel Mount Version VDC IT8000E EX 2/22 Standard Enclosure and Panel Mount Version VAC IT8000E EX 2/22 Standard Enclosure and Panel Mount Version VDC PRINTERS &

57 12 Price List July EX 2/22 OPTIONS A range of options available for the Systec 2/22 indicators. More options are available please contact us with specific enquiries. DESCRIPTION IT1000 Clock (IT1000 EX 2/22 only) IOM I/O Module (IT1000 EX 2/22 only) SIM Serial Interface Module (RS232, 20mA CL or RS485) SIM RS485 OPTO Optoisolated Serial Interface PIM I/ O Module DAU15 Analog Output Module 0-20mA / 0-10 VDC Ethernet Module (IT8000 only) BULK Software Package (IT3000A EX 2/22 only) FILL Software Package (IT3000A EX 2/22 only) External Relay and Transistor I/O see standard options Safe Area only ZONE 1/ IT3000EX ROBUST IP69K STAINLESS STEEL APPROVED INDUSTRIAL INDICATOR WITH NUMERIC KEYPAD Mains 230 VAC, 24 VDC or external 12 VDC Ex battery versions available. Standard applications include BASIC, CHECK, FILL and ONLINE. Integrated intrinsically safe I/O 5 VDC 2mA. OPTIONAL DESCRIPTION IT3000EX Standard Enclosure 230 VAC IT3000EX Standard Enclosure 24 VDC IT3000EX Standard Enclosure 24 VDC with DIN Rail Mounted Safe Area Power Supply IT3000EX Standard Enclosure 24 VDC with Stainless Steel Safe Area Power Supply IT3000EX Standard Enclosure 12 VDC with Ex Battery 24Ah T6 & Charger IT3000EX Standard Enclosure 12 VDC with Ex Battery 16Ah T5 & Charger PRINTERS &

58 12 Price List July IT8000 EX ATEX RATED FREELY PROGRAMMABLE INDICATOR Mains 230 VAC, 24 VDC or external 12 VDC Ex battery versions available. Freely programmable. Standard programs include, BAG, BASIC, BATCH, BIGBAG, BULK, CHECK, FILL, FLOW CONTROL, ONLINE, ONLINE OP and TRUCK/ONLINE. Integrated inputs 5 VDC and optional output module 5 VDC or 24 VDC. DESCRIPTION IT8000 EX Standard Enclosure 230 VAC IT8000 EX Standard Enclosure 24 VDC IT8000 EX Standard Enclosure 24 VDC with DIN Rail Mounted Safe Area Power Supply IT8000 EX Standard Enclosure 24 VDC with Stainless Steel Safe Area Power Supply IT8000 EX Standard Enclosure 12 VDC with Ex Battery 24Ah T6 & Charger IT8000 EX Standard Enclosure 12 VDC with Ex Battery 16Ah T5 & Charger EX 1/21 OPTIONS A range of options available for the Systec 1/21 indicators DESCRIPTION Panel Mount Version (additional cost) FILL Software Package (IT3000 EX only) ONLINE P Software Package (IT3000 EX only) OUT4-Exi Digital Output Module 5V (IT8000 EX only) TREL4-Exi Digital Output Module 24V (IT8000 EX only) SIM 10mA / S10mA Intrinsically Safe Serial Interface SAFE AREA OPTIONS T3000 Serial Interface Module SIM / S TS Ethernet Convertor Module including SIM / S TS-REL 485 Relay Module Complete (in stainless steel housing) including SIM & Interface Module Relay Module Separate (components only) including SIM & Interface Module Charger for Rechargeable Battery EX 24Ah T Charger for Rechargeable Battery EX 16Ah T PRINTERS &

59 12 Price List July SOFTWARE PC PROGRAMS SOFTWARE DESCRIPTION SERVICE/PROGRAMMING UTILITIES RTC WIN Software development environment with editor, compiler, debugger and test tools RTC LOADER Software to download and test application programs with data back-up, restore and edit facilities RTC CONFIGURATOR Software for configuration and print formatting NiceLabel Suite For the formatting of labels USER APPLICATIONS PC SQC Version 3.x PC BATCH Full Version PC BATCH Data Management RTC LOADER RTC MONITOR PC program for the recording of test results in compliance with the Regulation for Prepackaged Goods Process control and data management with raw material, recipe, order and personnel files for central control of up to 50 BATCH controllers With raw material, recipe and parameter files for the central control of up to 50 BATCH controllers Software to download and test application programs with data back-up, restore and edit facilities Software for service purposes to monitor and remotely control application programs over TCP/IP connections SQL DRIVER Software for embedding of external PC SQL databases into application programs NiceLabel Suite For the formatting of labels PC ReadIT To read and store records via serial and Ethernet interfaces PC COM+ PC COM+ For the communication between ONLINE program and windows programs such as Access, Excel, Visual basic or SAP systems. Including PC ARCHIVE as above with the additional ability of W&M approved storage of weighing data on PC hard disk PRINTERS &

60 13 Price List July PROGRAMMABLE BENCH SCALES PROGRAMMABLE BENCH SCALE FULLY PROGRAMMABLE SCALE WITH STANDARD FACTORY COUNTING PROGRAMS Database memory capability with optional expansion modules up to 2 mb Custom serial outputs for printing or host computer interface Custom serial input set up for barcode scanning Aluminium die cast housing. Large 16 x 40 LCD display 5 programmable soft keys Second scale input as standard additional 2 scale inputs optional (4 total) 2 serial ports standard additional 2 ports optional (4 total) RS485, ethernet and PS/2 keyboard adaptor options Digital I/O with optional modules OPTIONAL CAPACITY DIVISION PLATE mm kg 0.1g 200 x kg 0.2g 305 x kg 0.5g 305 x kg 1g 305 x kg 5g 305 x PROGRAMMABLE BENCH SCALES - OPTIONS SERIAL BUS MODULES [SBM]: THE SBM MODULAR OPTIONS FOR THE 675 ARE CONNECTED IN A DAISY CHAIN CONFIGURATION AND REQUIRE THE OPTION MOUNTING PLATE (WHICH CAN TAKE UP TO 4 SBM MODULES) DESCRIPTION 256k Database Memory Module MB Database Memory Module Ethernet Communications Module External PS/2 Keyboard Module Internal PS/2 + Com Port Module (see notes 1 & 2) Hour Battery Module includes recharging board Hour Battery Module includes recharging board RS [SBM] Multi Scale Module (see notes 2 & 3) [SBM] Analogue Output Module (see notes 2 & 3) [SBM] Optically Isolated Solid State 4 Position I/O Modules various electrical ratings & I/O combinations available (see notes 2 & 3) [SBM] Interconnection Cable (see notes 2 & 3) Option Mounting Plate (see note 2 ) Note 1: The external PS/2 keyboard module converts one existing RS232 port to accept a PS/2 keyboard, the internal PS/2 + Com Port Module provides either 2 additional RS232 ports or one RS232 and one PS/2 interface. Note 2: An Option Mounting Plate is required for these options. This plate can accommodate up to 4 optional modules. Note 3: If SBM modules are installed, an interconnection cable will be required. PRINTERS &

61 13 Price List July 2014 SECTION SERIES A series of programmable indicators providing a vast range of functionality. All models are based on a common structure enabling easy transfer of software and use of common optional extras. Display resolution up to 1:100,000. Stainless steel NEMA 4X / IP66 enclosures S 460 AND 465 Up to 2 scale inputs 2 serial ports Up to 8 physical I/O key keypad key keypad DISPLAY 460 VFD 6 digits (19mm) + 2x5 matrix VFD 6 digits (19mm) + 2x5 matrix S 560 AND 562 Up to 4 scale inputs 3 serial ports Up to 32 physical I/O 22 key keypad DISPLAY 560 VFD 6 digits (19mm) + 2x5 matrix LCD 8 x 40 characters (3 sizes) SERIES Up to 8 scale inputs 4 serial ports Up to 128 physical I/O 28 key keypad DISPLAY 660 VFD 6 digits (19mm) + 2x5 matrix LCD 8 x 40 characters (3 sizes) C LCD 16 x 40 characters (3 sizes) PRINTERS &

62 13 Price List July 2014 SECTION SERIES - OPTION SERIES OPTIONS A wide range of optional extras are available. SERIAL BUS MODULES [SBM]: The SBM modular options are connected in a daisy chain configuration. One SBM module can be mounted internally on models 460 & 465; 2 SBM modules can be mounted internally on all other models. Additional SBM modules can be mounted externally but may require additional connecting cables and/or mounting brackets. DESCRIPTION Durashield Splashguard k FRAM Database Memory K FRAM Database Memory k Database Memory Module MB Database Memory Module (660 series only) RS DeviceNet / Profibus / SCR Module POA Ethernet Module PS/2 Keyboard to Serial Input Adaptor Integrated Radio Modem [SBM] Multi-Scale Module (for connection of 1 additional scale input) [SBM] Analog Output Module (0-10VDC, 0-20mA, 4-20mA 16 bit) [SBM] Optically Isolated Solid State 4 Position I/O Modules various electrical ratings & I/O combinations available Panel Mount Kit (465, 560, 562, 660, 661 & 662 only) PRINTERS &

63 13 Price List July HAZARDOUS AREA WEIGHING ZONE 0/20 ATEX RATED The intrinsically safe range of indicators from GSE with EC Class III approval. Power is either by a battery pack that is mounted in the bracket and can be removed to the safe area for charging or by an external ac/dc mains adaptor that can be located in either the safe area or the hazardous area. Mains adaptor and battery included for respective models. Battery charger extra. RATINGS STD 5V EXCITATION 350/355IS 8V EXCITATION BATTERY POWER SUPPLY AC/DC MAINS ADAPTOR ATEX APPROVAL II 1 GD II 1 GD II 1 GD II 2 GD EEX IA EEX IA EEX IA PROTECTION EEX M (INTRINSICALLY (INTRINSICALLY (INTRINSICALLY METHOD (ENCAPSULATED) SAFE) SAFE) SAFE) APPARATUS GROUP IIC IIB IIC IIC TEMPERATURE T4 T4 T3 T4 CLASS AREA CLASSIFICATION ZONE 0 (GAS) ZONE 20 (DUST) ZONE 0 (GAS) ZONE 20 (DUST) ZONE 0 (GAS) ZONE 20 (DUST) ZONE 1 (GAS) ZONE 21 (DUST) INTRINSICALLY SAFE 5 key keypad LED or LCD display Power supply by either mains (adaptor included) or battery (battery included but charger extra) POWER SUPPLY DISPLAY 350 IS-EM Mains Adaptor LED IS-EB Battery LED IS-BM Mains Adaptor LCD IS-EM 350 IS-BB Battery LCD OR INTRINSICALLY SAFE Fully numeric keypad LED or LCD display Power supply by either mains (adaptor included) or battery (battery included but charger extra) POWER SUPPLY DISPLAY 355 IS-EM Mains Adaptor LED IS-EB Battery LED IS-BM Mains Adaptor LCD IS-BB 355 IS-BB Battery LCD OR PRINTERS &

64 13 Price List July S 350 & 355 INTRINSICALLY SAFE OPTIONS ITEM DESCRIPTION Fibre Optic Communication A pair of fibre optic transceivers for connecting a hazardous area indicator to a Kit safe area hub requires fibre optic cable Must be located in the safe area. Charges the battery in 3.5 hours. AC input 85- Battery Charger 265VAC V Excitation Increased load cell excitation voltage over the standard 5V POA Plastic Core Cable Plastic core fiber optic cable, maximum 60m 2.50 per m Plastic Core Connectors Connectors for plastic core cable. 4 req. per installation 2.00 Fitting Kit Kit to terminate plastic core cable and fit connectors Hard Clad Silicon Cable Pre-assembled HCS fibre optic cable, maximum 300m 4.00 per m Power Extension Cable 7.5 meters meters Please note: Batteries are covered by a warranty for 90 day from the original date of purchase. It is recommended that batteries are charged once a month when not in operation. Failure to do so may invalidate the warranty. SECTION 13.5 APPLICATIONS PROCESS CONTROL SYSTEM Provides statistical process control from item sampling with graphical trend of sample mean weights. Minimum requirement - Model 665 indicator with custom firmware and 256kb memory module and 32k FRAM AVERAGE WEIGHT SYSTEM Designed to help a packer comply with the average weight legislation, the system provides batch and sample statistics, operator prompting and output to a printer or host PC. Minimum requirement - Model 562 indicator with 256k memory module and 32k FRAM RECIPE SYSTEM Capable of controlling both manual and automatic ingredient addition, the recipe system enables easy product selection, operator prompting with visual display, batch number traceability and output to a printer or host PC. Minimum requirement - Model 665 indicator with 256k memory module and 32k FRAM PRINTERS &

65 13 Price List July PRODUCT LOOKUP AND LABELLING With product recall, use-by date calculation, totalising and customised label printing, the system provides all of the basic requirements for an outer case marking application. Minimum requirement Model 562 indicator with 32k FRAM AXLE WEIGHING PROGRAM Designed for use with a dormant platform and for vehicles with up to 7 axles the system provides individual axle and total vehicle weights. To accompany the system a MS excel based tool is available to obtain high resolution dynamic weighing data to assist in optimising the configuration. Minimum requirement - Model 562 indicator with 32k FRAM. Trace of test data in spreadsheet configuration tool CHECKWEIGHING PROGRAM The LCD display provides a graphical display of live weight against target together with product details which are looked up from an internal database. Minimum requirement - Model 562 indicator and 32k FRAM COUNTING Using the capabilities of the programmable bench scales to the full, the counting applications provide bar code scanning, label printing, inventory control and interfacing to host PCs. Minimum requirement Model 675 programmable bench scale FOC WEIGHBRIDGE PROGRAM The 562 indicator together with a remote keyboard allow weighbridge operations with 1st/2nd weight weighing by vehicle registration or alpha numeric ID. A simple numeric ID based system is also available for the 465 indicator. Minimum requirement - Model 562 indicator with 8k FRAM. FOC PRINTERS &

66 14 PRINTERS AND Price List July LINE PRINTERS STAR SP712 TALLY ROLL DOT MATRIX PRINTER 7 pin impact printer. 76mm width roll paper. High speed print approx 2.5 lines per second. RS232 serial interface Mains only. 158mm(w) x 234mm(d) x 193mm(h). SP STAR TSP-651 & EPSON TM-T88V HIGH SPEED THERMAL LINE PRINTERS Epson: 56/42 columns. Printing up to 200mm per second. Star: 94/48 columns. Printing up to 150mm per second. Suitable for indicators/scales with RS232 printer output. Star: two colour printing capability. Epson: external PSU. Star: external mains cable. STAR TSP EPSON TM-T88V EPSON TM-U295 & STAR SP298 DOT MATRIX SLIP PRINTERS 9 pin dot matrix impact printer. Up to 63mm print width. Copy capability original + 2 copies External mains power supply included. RS232 interface Star: 180mm(w) x 190mm(d) x 138.5mm(h). Epson: 180mm(w) x 190mm(d) x 101mm(h). EPSON TM-U STAR SP FM SP-POS THERMAL LINE TALLY ROLL PRINTER 48mm print width. 203dpi print resolution. Serial & parallel interface. Epson compatible. Supports various bar code formats & graphics. Roll core inner diameter 13mm. Max roll diameter 80mm. 12v mains supply PSU included. 112mm(w) x 200mm(d) x 126mm(h). SP-POS58EZ Paper Rolls (1 box of 20) PRINTERS &

67 14 PRINTERS AND Price List July MARTEL INSTRUMENTS MPP2000 PANEL MOUNT THERMAL PRINTER 48mm print width. 200dpi print resolution. 32mm diameter paper roll. 48mm for the MPP vdc or 10-35vdc. Easy kwik clip mounts. RS232 & USB as standard. RS485 & TTL POA. POWER SUPPLY PRINT SPEED LINES PER SECOND MPP vdc, 4A MPP vdc, 2A MPP vdc LABEL PRINTERS UWE UTP-50 THERMAL BAR CODE LABEL PRINTER 48mm print width. 8 dots per mm / 203dpi print resolution. Various bar code formats. Suitable for selected UWE scales. 12v mains supply PSU included. Can print on continuous thermal paper. UTP Paper Rolls POA CITIZEN CL-S521 & CL-S621 ROBUST DESKTOP LABEL PRINTER For use with selected scales/indicators with RS232 or USB output. Direct & thermal transfer printing (where specified). 203dpi print resolution. Text, bar code and graphics. Optional Ethernet and peelers. LABEL WIDTH mm PRINT SPEED IPS THERMAL TRANSFER CORE DIAMETER mm MAX. LABEL ROLL DIAMETER mm CL-S No CL-S Yes OPTIONS Ethernet Peeler PRINTERS &

68 14 PRINTERS AND Price List July CITIZEN CL-S700 LABEL PRINTER WITH COMPLETE METAL HOUSING For use with selected scales/indicators with RS232 or USB output. Mains. Backlit LCD display. 203 dpi print resolution. Thermal transfer or direct thermal printer (where specified.) Accepts self-adhesive labels, non-adhesive tags or continuous paper strip. CL-S700R features peeler as standard, internal rewind as an option. Optional Ethernet and peelers. LABEL WIDTH mm PRINT SPEED IPS THERMAL TRANSFER CORE DIAMETER mm MAX. LABEL ROLL DIAMETER mm CL-S700DT No CL-S Yes CL-S700R Yes OPTIONS Ethernet Peeler Internal Rewind TEC PRINTERS RANGE OF LABEL PRINTERS FOR TEXT, BARCODES AND GRAPHICS For use with selected scales/indicators with RS232 output. Mains operated with both serial and parallel interfaces. Direct thermal printing (B-SV4D) direct & thermal transfer (B-SA4T & B-SX4T) Label widths up to 104mm for B-SA4T and B-SX4T and 108mm for the B-SV4D. Complete with windows drivers and label design software. TEC B-SV4D TEC B-SA4T TEC B-SX4T REMOTE DISPLAYS FM RD-DOT DOT MATRIX REMOTE DISPLAY Displays 9 full height (60 x 95mm) or 18 half-height (60 x 60mm) characters. Built-in clock. 700mm(w) x 158mm(h) x 43mm(d). RD-DOT PRINTERS &

69 14 PRINTERS AND Price List July SERIAL COMMUNICATIONS SERIAL CABLES Serial cables for bespoke applications up to 2m in length. Wiring and fitting to suit individual requirements. Pricing for a single application. RS232 CABLE ETHERNET CABLE ETHERNET CABLE WITH GLAND USB CABLE WITH GLAND SCANNERS QUICKSCAN SCANNER LIGHT WEIGHT ERGONOMIC CORDED OR CORDLESS SCANNERS Wide scan angle allowing longer bar codes to be read at shorter distance. RS232 or USB interface. Corded IP42 & cordless IP30. Rated for 1.5m drop onto concrete surface. User replaceable scan windows. Cordless model supplied with radio base station and recharging unit. Radio range 12m. QUICKSCAN CORDED QUICKSCAN CORDLESS GRYPHON SCANNER CORDED OR CORDLESS SCANNERS WITH GREEN SPOT GOOD READ INDICATION RS232 or USB interface. Wide range of barcode types supported. IP52 and rated for 1.8m drop onto concrete surface. Read range from near contact to over 300mm. Cordless model supplied with radio base station and recharging unit. Radio range 30m. Models with display & buttons available. POA. GRYPHON CORDED GRYPHON CORDLESS METAL CASES METAL CASES Metal cases with die cut foam inserts ideal for demonstration equipment or mobile applications. METAL CASE POA PRINTERS &

70 15 AND JUNCTION BOXES Price List July KELI & JUNCTION BOXES A range of EC Approved load cells for all applications. Supplied with accessories where shown. Many more types available. Please ask for details. AMI AMIB UDB UDA SQB DEE ZSFY RANGE OF CAPACITIES kg APPLICATION MATERIAL IP RATING ACCESSORIES AMI 8 40 Bench Aluminium 65 No AMIB Bench/Floor Aluminium 65 No UDB Bench/Floor Aluminium 65 No UDA Floor Aluminium 65 No SQB Platform Steel 67 Yes SQB Platform Steel 67 Yes SQB-S Platform Stainless Steel 68 Yes SQB-S Platform Stainless Steel 68 Yes DEE S Steel 65 Yes ZSFY tonnes Weighbridge Stainless Steel 68 Yes JUNCTION BOXES Either stainless steel or aluminium housing. Parallel or serial mode. 4,6, & 8 cable options. Highly accurate individual potentiometers. ALUMINIUM JUNCTION BOX STAINLESS STEEL JUNCTION BOX MATERIAL MAX. NO. CABLES J-BOX-AL-4 Aluminium J-BOX-AL-6 Aluminium J-BOX-AL-8 Aluminium J-BOX-SS-4 Stainless Steel J-BOX-SS-6 Stainless Steel J-BOX-SS-8 Stainless Steel Prices exclude delivery, VAT and stamping fees (unless stated) PRINTERS &

71 15 AND JUNCTION BOXES Price List July THAMES SIDE LOAD CELL ASSEMBLIES LA66 CANTILEVER BEAM Stainless steel load cell element. Anti-vibration mount. ATEX certification available for dust and gas. Designed for platform, hopper and tank weighing, bag fillers and belt weighers. CAPACITIES kg LA66 10, 20, 50, 100, EXTRA ATEX Approval LA350 SINGLE ENDED SHEAR BEAM Stainless steel load cell element. Anti-vibration mount. ATEX certification available for dust and gas. Designed for platform, hopper and tank weighing, bag fillers and belt weighers. CAPACITIES kg 300, 500, 1000, 1500, LA , EXTRA ATEX Approval LEVERMOUNT PATENTED LOAD CELL AND MOUNT Stainless steel single ended shear beam load cell element. 316 cast stainless steel mount. Unique and secure load cell installation/removal without jacks. Designed for process weighing applications particularly food and pharmaceutical. Substantial integral anti-lift. CAPACITIES kg 10, 20, 50, 100, LEVERMOUNT 300, 500, 1000, 1500, , EXTRA ATEX Approval T93LA FOLDED SHEAR BEAM Stainless steel folded shear beam load cell element. Autophoretic coated loading assembly. Integral lift off protection. Tolerant of misalignment. Designed for silo, tank, hopper and vessel weighing. CAPACITIES kg 500, 1000, T93LA 3500, 5000, , 15000, EXTRA ATEX Approval Prices exclude delivery, VAT and stamping fees (unless stated) PRINTERS &

72 16 Price List July INDIVIDUAL AND SETS OF INDIVIDUAL ADJUSTED, STAMPED AND M1 METRIC BRASS CYLINDRICAL IRON HEXAGONAL IRON BAR M1 M2 STPD M1 M2 STPD M1 M2 M3 STPD 1-500mg g g g g g g g g g kg kg kg kg kg kg kg BRASS IN PLASTIC OR WOODEN BOX WITH FORCEPS (Composition: 1x1g, 2x2g, 1x5g, 1x10g, 2x20g, 1x50g etc for all sets) Please specify plastic or wooden box at time of ordering M2 STAMPED M1 M1 CERTIFIED (INC DKD CERT.) FROM TO 1g TO 1g TO 1g TO 1mg TO 1g TO 1mg 50g g g g kg kg kg kg SECTION BOXES FOR Wooden or plastic boxes for up to 7 weights for tailor-made sets. Select size by using the highest single weight. Boxes are supplied with tweezers and gloves. For boxes for individual weights see section HIGHEST FITTING SINGLE WEIGHT VELVET LINED WOODEN BOXES E1, E2 & F1 Prices exclude delivery, VAT and stamping fees (unless stated) UNLINED WOODEN BOXES F2 & M1 PLASTIC CARRYING CASE 200g g kg kg kg kg PRINTERS &

73 16 Price List July SLOTTED, CAST IRON BLOCK & SLEEPER IRON SLOTTED BRASS SLOTTED BLOCK WEIGHT I SLOTTED IRON (TO SUIT 12MM ROD) SLOTTED BRASS (TO SUIT 4.5MM ROD) DIA x HT mm M1 DIA x HT mm M1 50g (brass) 12mm slot g 13 x g 47 x g 13 x g 50 x g 18 x g 80 x g 21 x kg 97 x g 25 x kg 105 x g 27 x kg 154 x g 38 x kg 210 x g 38 x kg 280 x N 47 x N 50 x N 100 x N 100 x N 100 x N 150 x N 245 x N 260 x IRON HANGERS BRASS HANGERS DETAILS M1 & M2 DETAILS M1 & M2 500g/5N 280mm stem g 35mm stem kg/10N 460mm stem g 65mm stem g 105mm stem g 105mm stem CAST IRON BLOCK With interlocking design, one lifting bar, one fork lift slot & adjusting cavity with sealing cap (can be identified). Adjusted to +/- 1%. WEIGHT DIMENSIONS W x D x H mm. EACH 100kg 360 x 360 x 157 POA 250kg 530 x 524 x 157 POA 500kg 530 x 524 x 291 POA 1000kg 522 x 520 x 566 POA CAST IRON I With interlocking design, two outer edge lifting slots, one lifting bar & sealed adjusting cavity. Adjusted to an m1 tolerance & individually identified. 100kg 340 x 200 x kg 432 x 244 x kg 580 x 320 x kg 650 x 440 x UK IF REQUIRED POA Prices exclude delivery, VAT and stamping fees (unless stated) PRINTERS &

74 16 Price List July OIML WEIGHT E1, E2 AND F1 FULLY LINED WOODEN BOX WITH GLOVES, TWEEZERS AND DUST BRUSH E1 STAINLESS STEEL E2 STAINLESS STEEL F1 STAINLESS STEEL F2 AND M1 WOODEN (UNLINED) OR PLASTIC BOXES WITH TWEEZERS. PLEASE SPECIFY BOX TYPE AT TIME OF ORDER F1 NICKEL PLATED BRASS F2 STAINLESS STEEL M1 STAINLESS STEEL M1 BRASS INDIVIDUAL * mg each g g g g g g g g g kg kg kg kg kg kg SETS OF MILLIGRAM IN BOX (1x1, 2x2, 1x5, 1x10, 2x20, 1x50, 1x100, 2x200 etc) 500-1mg BOXES OF TO 1mg (1x1, 2x2, 1x5, 1x10, 2x20, 1x50, 1x100, 2x200 etc) 50g g g g kg kg kg kg BOXES FOR INDIVIDUAL WEIGH T VELVET LINED WOODEN BOXES E1, E2 & F1 UNLINED WOODEN BOXES F2 & M1 LINED PLASTIC BOXES E2 LINED PLASTIC BOXES F1, F2 & M g g kg kg kg kg kg kg * Individual E1 to F2 weight can only be purchased with lined plastic boxes (and where not available the appropriate wooden box). Boxes are available for sets of weights (see Section 16.3). All types are suitable for ISO 9000 traceable certification. Special weights and boxes are available to order POA. Prices exclude delivery, VAT and stamping fees (unless stated) PRINTERS &

75 16 Price List July INDIVIDUAL & BOXED SETS OF STAINLESS STEEL INDIVIDUAL 5kg - 20 kg supplied in hinged cases. 10g 2kg supplied in individual padded plastic cases. 1g - 10g supplied in pill style boxes. M1 F1 1g g g g g g g g g kg kg kg kg kg BOX SETS OF All sets are supplied with a handling glove and forceps. M1 F1 2kg 1mg kg 1mg g 1mg g 1mg Prices exclude delivery, VAT and stamping fees (unless stated) PRINTERS &