4/8 CH Vehicle Mobile DVR

Transcription

1 4/8 CH Vehicle Mobile DVR 2013 OCT V1.0 optional

2 Safety Precautions Take and review some testing video initially to make sure the images were recorded correctly. Please note that manufacturer, its subsidiaries and affiliates, and its distributors are not liable for consequential damages arising from any malfunction of main device accessory, including memory device that results in the failure of an image to be recorded or to be recorded in a way that is machine readable. Before using the product, please ensure that you read the safety precautions described below. Always ensure that the product is used correctly. Please keep device away from children. Use only recommended power sources. Do not attempt to disassemble, alter or apply heat to the product. Avoid dropping or subjecting the product to severe impacts. To avoid the risk of injury, do not touch the interior of the product if it has been dropped or otherwise damaged. Stop using the product immediately if it emits smoke, a strange smell, or otherwise behaves abnormally. Do not use organic solvents such as alcohol, benzene, or thinner to clean the product. Do not let the product come into contact with water (e.g. sea water) or other liquids. Do not allow liquids or foreign objects to enter the VVR. Do not place the VVR near or in direct flame. Do not handle the power cord with wet hands. Do not use the equipment in a manner that exceeds the rated capacity of the electrical outlet or wiring accessories. Do not use if the power cord or plug are damaged, or not fully plugged into the outlet. Do not allow direct or metal objects (such as pins or keys) to contact the terminals or plug. Avoid using, placing or storing the product in the humid or dusty areas. i

3 Index A. Features... 1 B. Specification... 2 D. Record / Stop-Record... 7 E. System operating instruction... 8 Through IR Remote controller instruction... 8 Main menu page switch... 9 System Setup instruction LIVE Display Playback mode F. Carbox Player on PC site Through Carbox Player on PC site (1). Snapshot (2). Configuration (3). Backup (4). Playback (5). Format (6). Playback date selection G. 3G client software for viewing directly(select models with 3G modules) H. HDD Format (1) Format in your computer I. Restore Storage Device J. 3G INTERNET SETTING K. Capacity Evaluation of Continuous Recording Storage Device s ii

4 A. Features Provide Video output for playing-back mode in mainframe. Recording format: D1 and CIF User friendly player software, easy to operation. Overall quick search event log. The full recording time and date can be showing in the monitor directly. Auto recording after power supplied. Removable HDD Track compatible with 2.5" HDD or SSD. Firmware can be upgraded via USB port. Support recording audio, video, G-sensor and GPS data at the same time. Optional 3G module, for real time monitoring the driving statue, or talk to driver. 1

5 B. Specification Type Video Format 8CH Vehicle DVR NTSC/PAL Operating System Embedded Linux Video Input Max. Cam Power supplier Video Output Audio Input Audio Output Alarm Input Control Mode Multi-Language Display Resolution Recording Resolution Recording Resolution Display Mode Triplex 8CH Input 12V/250mA/Each 1CH Output 1CH Input 1CH Output 4 Alarm Input GUI English / Chinese / Others NTSC 240 fields/s (8x30 fields/s) PAL 200 fields/s (8x25 fields/s) Max. 30fps@CIF (real time NTSC recording) Max. 25fps@CIF (real time PAL recording) Max. 30fps@CIF (real time NTSC playback) Max. 25fps@CIF (real time PAL playback) Full Screen, 4 / 9 Split Record / Playback / Network 2

6 Resolution Compression Algorithm HDD Backup Device Playback Mode LED Indicator Signal Loss Detector Buzzer Alarm Output RS485 MOUSE GPS G-SENSOR Network 3G WIFI IR Remote Control NTSC 720 x 480 Display PAL 720 x x240@CIF/ NTSC 720x480@D1/ Recording 360x288@CIF PAL 720x576@D1/ H.264(1~ 5) 2.5 SATA HDD Caddy Max. 1Tb USB Storage or through Carbox Player Search Function: Time / Event Full Screen 4 LED (LAN REC GPS Power) Yes Yes Yes Yes Yes Yes Yes optional optional Yes 3

7 Watchdog Extended Record Mode Power Supply Dimension Operation Temperature Weight Yes Yes DC 8V~36V 250mm x 174.8mm x 69.5mm -20 ~ kg(with bracket and HDD) *Version updating is not going to inform, please check the on-going updating information 4

8 C. Product Appearance FRONT PANEL USB connection Sim card slot SIM lock Power light Record light Network light GPS light HD slot HD slot lock Infrared receiver 5

9 REAR PANEL RS-485 Connection USB Connection Audio output Video output Hollow connection Video recorder connectino 1-8 CH Hollow connection 1 set of video/ audio output 4 set of alarm input Power Connection Audio input Network Connection G-Mouse connection 3G antenna connection WIFI antenna connection Power connection 1. Signal & DC grounding 2. Signal & DC grounding 3. DC8~36V vehicle power (+) 4. ACC control 5. GNDP vehicle power (-) 6

10 D. Record / Stop-Record 1. Power on / Record Turn on the power, and it will take approximately 40 seconds to boot up. During the recorder booting up, the HDD indicator LED will start flashing as the recording is in progress. Light indicator: Red light: light on, means power on; light off, means no power/power off. Green light: light flashing, means HDD take recording; light off means non-recording. Yellow light: On when internet connection; off when internet disconnection. Blue light: On when GPS positioning is ready; off when GPS is not ready. Remark: While using playback function in DVR, it cannot take live recording at that time. 2. Power off/stop recording: Power off also stop recording, at then you can take out HDD to read the recorded files. 7

11 E. System operating instruction Vehicle DVR can be operated through two methods: IR remote controller and PC software application. Through IR Remote controller instruction 1. As following is the key mapping table for IR Remote controller: Arrow Menu Enter Channel 1-8 Select the options in the menu list. Open the main menu or back to previous page. Enter the menu or save the setting options. Select channel 1-8 under watching or review mode Separate the screen to quad 8

12 Four parts switch divisions display Eight parts switch Mute Play REC Stop Pause Speed forward Speed backward Separate the screen to eight divisions display Do not record the audio data Start play under Manual recording under watching mode Stop and back to up layer under play mode Pause under review mode Speed up under review mode Speed up backward under review mode 2. DVR OSD menu operation and IR Remote controller key mapping chart Main menu page switch page1/4 setting page 2/4 setting Page3/4 setting page 4/4 setting 9

13 IR Remote controller Instruction (1) Select Item: [up/down/left/right] (2) Change setting for selected item: [up/down/left/right] (3) Change setting for Bar item:[enter] (4) Full Screen display for each CH: [CH1~CH4] (5) Open OSD menu, back to previous page:[menu] (6) Quad display:[quad] (7) Enter playback mode:[play] (8) Stop Play/exit playback mode:[stop] (9) Suspend recording:[pause] System Setup instruction (1) Set Encode Parameter IR Remote controller operating instruction (1) Can be selected Resolution/Record frame rate /Recording quality from up/down key on remote controller. (2) Left key Change parameter. (3) Right key Back to pervious parameter. Items Setting (1) Encode Frame Size (Res.): D1 / CIF (2) Encode Frame Rate: 5/15/20/25/30 (D1 max. 15 / CIF max. 30) (3) Encode Quality: Low/Normal/High 10

14 2. Set Parking Mode Controller explanation increase frame decrease frame Setting Encode frame rate: 5, 10, 15, 20, 25, 30, (D1 Maximum 15, CIF Maximum 30 and cannot over than original setting) 3. Set Video Parameter IR remote controller operating instruction (1) Up/Down key Select current channel for setup (2) Left/Right key Set brightness/contrast/hue for current channel (Left key To reduce)/ (Right key To increase) Item Setting (1) Brightness: (Left key to reduce)/ (Right key to increase) (2) Contrast: (Left key to reduce)/ (Right key to increase) (3) Hue: (Left key to reduce Hue)/ (Right key to increase Hue) 11

15 4. Set Time IR Remote controller operating instruction (1) Up key Plus one, Down key Reduce one. (2) Left key Left one space, Right key Right one space. 5. Set Plate Number IR Remote controller operating instruction (1) Up key Numbers plus one or alphabetical order to increase. (2) Down key Number reduce one or alphabetical order to reduce (3) Left key Left one space. (4) Right key Right one space. 6. Delete All Record Data (Format Disk) 12

16 (1) Delete All Record Data Use right key or left key to select the selection then click enter to confirm. Caution! All data will be deleted when you click Yes. 7. Default Live View Channel Display (1) Select the default live view CH after startup: Item selected will be default live view display mode after DVR booting completed. (2) On this page, Use left key or right key to select Quad display (Multi-CH) or CH 1 Display, then press enter to confirm. 8. Power Management (1) Power Management: Setup Extended Record period after Engine shutdown. (2) Use IR Remote controller for setting, Click Left key to move one space for selecting time for delay-recording, then press enter key to confirm.(the delay-recording period can be 0,5,10,15,20 minutes) 13

17 9. Check Firmware Version (1) To check current firmware version, please select version and press enter key. Check the current firmware version first before firmware upgraded. 10. Check MDVR ID Information (Only available when DVR with specific 3G module) (1) If you need to check current MDVR ID information, please click MDVR ID and press enter key on remote controller. Check the current MDVR ID version is the newest version first before start 3G information setup. 11. Alarm Setting (1) When the alarm is triggered, the screen should display which CH is triggered. Press the right/left button on 14

18 remote controller to select channel, then press the confirm key set the channel. Check the explanation of back panel, in order to facilitate triggering alarm information setting. Alarm system works only after finishing both hardware and software setting. 12. G-Sensor Setting (1) G_Sensor options:on OFF. (2) G_Sensor Mode:Sedan mode Truck mode. (3) G_Sensor sensitivity options:min Low medium High Max. 13. Default Settings (1) Make sure if update complete through using controller. 14. Firmware Update 15

19 (1) Before execute, please save the firmware files to the SD card, and insert the SD card into DVR (2) DVR can not interrupt power source when updating the firmware. After firmware update, the DVR system will reboot automatically. 15. Version (1) You can check the firmware version here to make sure if you need to update the firmware 16

20 LIVE Display Statue definition Recording GPS signal on line Microphone on Manuel force record G-sensor on (1) Select CH1~CH8 to full display mode; If you want to return to quad display, please press quad key; Press 8 division key to back to 8 divisions screen mode. (2) On Live view mode, click menu to enter OSD menu or click Play to enter playback mode. If it shows the G mark on Upper right screen, it means GPS positioning successes. 17

21 Playback mode (1) Select CH1~CH8 as full display for each CH; If you want to return to quad display, please press quad key. Press 8 division key to back to 8 divisions screen mode. (2) On Playback mode, please click stop to exit the playback mode. (3) Press pause key to pause video stream. (4) On Pause mode, Press the play key to continue play recording file. 18

22 F. Carbox Player on PC site 1. Through Carbox Player on PC site (1) Use HDD to playback directly Execute the CarBox2.exe from CD-ROM, the display as showing below. Click Play button to select HDD; or click open file to choose the files from hard disk, and then double-click the file you want to play. Under playing mode the play key will switch to pause key. Caution: It needs to install DirectX 9.0 or above before running CarBox2 software. 2. Operating instruction Viewer interface schematic Playback date selection Control Interface GOOGLE Map GPS Coordinate Speed G-Sensor Volume Play BAR Play speed GOOGLE Map GPS Coordinate, Speed and Google Map (select models with 3G modules) 19

23 (1). Control interface description Snapshot Configuration Disk backup Playback Tool, HDD format, language setting. Previous File Previous Frame Backward Play Pause Stop Play Next Frame Next file 20

24 (1). Snapshot Capture:Screen shoot Click the icon to capture the footage screen. The Image will be save as.bmpfile format. Player will show the backup folder automatically. The default directory is the Snapshot folder. (Under the Player installation folder) (2). Configuration Configuration: Setup the general setting. Before execute this function, please insert the SD card into your computer. When finish all setting and click Save, all the setting will save to the SD card. When you insert the SD card into your DVR, the DVR will read the setting and follow the setting to start recording. 21

25 1 Image Quality Choose the resolution: High / Normal / Low 2 fps Set the fps D1 resolution:5~15 CIF resolution:5~30 3 Image Format Two format: D1 / CIF Car 4 Information 5 Password Car License, Driver (For Company car, Taxi, or fleet) Encrypt the SD card to prevent others who not permitted to access the SD card. String length: 15 character. After setting the password, all 22

26 6 Time Zone actions, like Playback footage, setting, format SD, need the password. Note: Upper character and lower is different. GMT setting, to adjust the time zone. ( need GPS signal to adjust the accurate time zone automatically) If choose Time setting, you need to set the time by yourself. 7 Copy Player to Storage Copy all Player related files to Storage 9 Speed Unit G-sensor 10 Sensitivity Set the speed unit Km/hr Mile/hr Knot G-sensor sensitivity setting mode Sensitivity setting: (Min/Low/Normal/High/ Max) 11 Audio Recording Set Audio Recording off or on. 23

27 (3). Backup Backup folder: Choose the folder that backup file will save. You can backup the footage on the SD card to your computer for data backup. Choose icon to start the backup function as the following : Step1.Choose the Local Disk, Removable Storage or Backup File. 24

28 Step2.Choose the file you want to backup on the SD card. Step3.Choose backup file audio and format Backup format: SD format *.sd AVI format.avi Note:*.sd format file contain image/ speed/ location and G-SENSOR data. *.avi format only can backup the video and audio. We recommend you backup as *.sd format. 25

29 Step4.You also can choose a period to backup the footage during the period. Step5.Choose the backup folder. Step6.Start to backup. Step7. Backup Completed. (4). Playback Playback the footage: Choose the file in SD Card or in the computer to playback. 26

30 1. Choose the Local Disk, Removable Storage or Backup File 2. Choose the file (5). Format Format:Format the SD Card Restore the SD card format to windows format. Language setting, Firmware version. For Format and restore SD card, please reference the next item 27

31 (6). Playback date selection Quick switching by minutes Selecting by date Selecting by Hours/Minutes (24-hours) (7). Latitude & Longitude Coordinates Position Latitude & Longitude (8). Speed meter Speed (9). G SENSOR G-sensor: Detect & record G-force data. 28

32 G SENSOR (1) X: The G-force from left & right of the car. (2) Y: The G-force from front & back of the car. (3) Z: The G-force from upside & downside of the car (10). Volume control Volume BAR: Click the left button of mouse control to adjust the volume degree. (11). Video Search Video Searching:You can use the mouse to drag the bar to search the video quickly. (12). Video Search & Play Speed Play Speed: Support 2x, 4x 8x fast forwarding and -1/2x, -1/4x -1/8x slow play mode. 29

33 G. 3G client software for viewing directly(select models with 3G modules) Executive Playback software 3G ClientApp.exe, the playback screen shown as below. Enter the username and password and then press Login button to login screen. Note: To perform this software will require DirectX 9.0 or more. Real time monitoring screen 30

34 Equipments list display all the connecting equipments. Be able to play real-time image form all channels. Lift click mouse to open equipment channel than click on chennel to view the real-time image. Functional explaination Single display Quad display 9 divisions display 16 disvisions display Muti-divisions display,25/36/49/64 Signle snapshot as AVI file snapshot Auto turn over page/ disable auto turn over page All screen snapshot as AVI files Page up / page down 31

35 Real-time message interface (be able to turn matter, equipment list, and map display mode) Satiline-map Click the icon to connect real-time image. Tracking screen Display 3G real-time tracking to know the driving path. 32

36 Setting (page 1) Setting the FPS, recording function, auto turn over page, and language. 33

37 Setting page 2 Setting 3G function, recording, and . 3G Client alarm: Setting the alarm function after server. When the alarm start, the message would show on the message box. If the function trun on, the message would send to your box at the sametime. setting: see the graph below 34

38 SMTP list table 35

39 H. HDD Format When should you format the HDD? For brand new HDD or an used HDD which is used in other equipment before, it should be formatted before using. (1) Format in your computer Step1.Pulg your SD card into card reader or SD slot in your computer. Execute the (bundle in our product CD) CarBox2.exe software Step2.Click the format tool icon, then you can into the format function screen Choose the SD card, press the Format icon a. b. Step4. Windows pop up the menu as follows and ask you to answer Start to Format this device?, Please make sure the disk drive is right, then press Yes. 36

40 Step 5. When the format procedure finish, the following pop window will show on your screen. (After finish the SD card format, please remove your SD card from the computer and insert into the slot again. Then you can start to proceed the related setup on the Player can do. Then insert the SD to your recorder, your recorder is ready for recording the footage. ) (2) Process to Format the HDD on DVR: 1. Use remote controller to enter DVR menu and choose Delete All the Record Data(format disk). 37

41 2. Select Yes and Click Enter to start formatting. 3. When the screen back to LIVE mode,the formatting is completed. 38

42 I. Restore Storage Device Before restore the SD card, remember to backup your footage on the SD card, if needed. Q. When you need to restore the SD card? A. When you want to use the SD card on other purpose, you need to proceed the Restore function. This procedure will format the SD card to the normal windows format. Only proceed this procedure, you can use the SD card as a normal storage device. Step1. Remove the SD card from your recorder, insert into your card reader, then plug into your computer USB slot, execute the bundle Player CarBox2.exe (In our CD) Step2. Click the Format icon,choose the SD card, then press Restore 39

43 Step3.The following window will pop up, Click Yes to start restore the SD. Step4.Now system will pop up the window to proceed the format procedure, please choose Quick format, then click Start. 40

44 Step5. Click Yes to start formatting the SD card Step6. Click "OK" to finish restore SD card. Step7.After finished, press OK Then the SD card format is normal windows format. 41

45 J. 3G INTERNET SETTING a. Please confirm whether the code number is closed or not. b. Confirm if The Telecommunication providers APN is the same with Dial-Up Number s information, if not, please follow all 3G Config Tool setting file steps. i. Please double click and open the setting page as below: The explanation for setting up: 42

46 1. UserName: No need in common 2. Password: No need in common 3. Server Address: Enter Server IP address setting----default Server IP Address is Server Port: Default Sever Port is 13579, Not recommend to change the original setting). 5. APN: 3G APN, generally preset to be Taiwan Telecommunication providers, if in other area, Please check local Telecommunication providers offered APN setting name.) 6. Dial-Up Number: 3G Dial-Up Number, generally preset to be *99#, if in other area, Please check local Telecommunication providers offered 3G Dial-Up SETTING Numbers. 7. 3G On/Off: To choice whether star the 3G tele-connecting function or not. Pick (V) mean Star commonly, if not willing to use tele-connecting function, please directly neglect it. 43

47 ii. Please put USB FLASH DRIVER into the PC s USB drive port, choice & click the proper disk storage. And input the following data as below: iii. After inputting, pick <o.k.> and process saving, the 3G Module information setting would be finished at this moment. Please check the USB Flash Driver DISK to find out if our <net3g.ncf>file existed. iv. And Please put your USB FLASH DRIVER into the SA-650-CF USB connecting Port, and re-connect the battery again.<after first {star}, if update information successfully, It would re-start again after 10 seconds.> 44

48 v. After re-start, please pick the 3G internet item up in contents to confirm whether the 3G information updating successful or not. When updating successfully, all the updating information would shown on the 3G module related web information. When 3G connecting successfully, the right upper screen would show N signal. 45

49 K. Capacity Evaluation of Continuous Recording Storage Device Assumption of the minimum record time for Mobile DVR: 8Ch/15FPS, Statics Recording and different capacity of Hard Disk. The following recording table is evaluated by 1TB. 46

50 More product information Please visit VACRON web-site Made in Taiwan