ENGLISH HD-CCTV DVR. Hybrid DVR Series. Quick Guide. (EN Rev 1.7)

Transcription

1 HD-CCTV DVR Hybrid DVR Series Quick Guide (EN Rev 1.7) 1

2 Components Please check the below to make sure you have every component. DVR Remote Control & Batteries Mouse power cord PoC Adaptor * Rack bracket(optional) * screw SD video input extension cable (*) SW & Manual CD Quick guide Before using the product, Please read the below carefully before using this product. Don t use the product outdoors. Don t spill water or liquid on connecting part of the product Don t place heavy objects or damage the product. Do not pull out the power plug forcibly. Do not disassemble the product by yourself. Don t use in excess of stated power I/O range. Use a certified power cord only. Use ground power plug. * Varies between different models A-class Equipment (Broadcasting Communication Equipment for Industrial use only) Users should understand this is A-class broadcasting communication equipment for industrial use only and must not be used for home use. Connecting different components 2

3 HDMI Monitor connection 1920X1080p resolution is suppoeted. Please check if monitor can support this resolution before connection. DVR s video output : 1920 x 1080p <Warning> Use of HDMI certified cable is recommended when connecting to a HDMI Monitor. VGA Monitor connection 800X600, 1024X768, 1280X1024, 1920X1080 resolution is suppoeted. Please check if monitor can support this resolution before connection. (4ch models supports only 1920 x 1080 resolution) VGA output resolution change in the menu [FUNC menu - tool VGA resolution] click then select preferable resolution and reboot DVR. VGA output resolution change by remote control Press [FUNC X-FUNC-MULTI] key in order to change VGA resolution.(based on X value) X : 1 800x600 X : x768 X : x1024 X : x1280 Connecting to a camera Please connect HD-SDI(1080P/720P), AHD* (1080P/720P), EX-SDI (1080P/720P), 960H, NTSC/PAL camera using the recommended cable <Note> PoC models need additional SD input video extension cable connected and viewed. Recommended Cables * Adopted differently based on product specification. in case 960H, NTSC/PAL type cameras are Cable Category HD-SDI transmit EX-SDI transmit Applications distance(*) distance(*) 5C2V about 90M about 150M Analog cable 4C-FB(T), 4C-HFB(T), about 140M about 280M High-foamed cable (Double or RG59 Trishield recommended) 5C-FB(T), 5C-HFB, L- about 180M about 360M Cable for HD-SDI 6CHD, RG6 5C-HFBT about 200M about 400M ~ 500M Cable for HD-SDI * Depends on manufacturer and models. <Warning> Transmission distance will be affected by cable types and installation site environment Transmission distance of cables shows differences based on the attenuation factor at 750MHz. (db/100m < 25dB is recommended) Foamed or high-foamed trishield cable is recommended. Coaxial cable and BNC connector must have 75Ω impedance. Careful to cable deformation due to high pressure over the cable. Don t pull the cable with too much force. During the arrangement of the coaxial cables at the rear of the rack, if tied too tightly, inside/outside insulator of cable could be deformed, so tie it loosely within cable s curvature range. 3

4 HDD registration and format menu system disk If DVR is powered after HDD installation, it shows Disk manager automatically. (It takes approx. 1minutes after power) If it doesn t run, please check the connectivity of HDD (1) Select a HDD among listed HDDs. Activate the HDD and execute format. (2) Check YES for the fomatted HDD.. <warning> Please call Webgate or Webgate dealers for HDD compatibility Copy copy In case backup media is well connected, click [Copy] button in FUNC menu and back media is auto detected. Process of Copy Inserting USB disk to DVR s USD port Select EXE as type Select the channels to copy Decide the period to copy Select USB disk at Disk List Click Start Connecting to Network 4

5 Network settings menu network network Ethernet IP Address IP address is used for the communication between DVR and Control Center, and it is used for Webviewer to connect DVR. Also Netmask, Gateway addresses given fromt the network administrator should be properly configured. (When DHCP is enabled, this item will be disabled) Net Mask Net Mask defines the communication range of IP address. This information should be given from the network administrator. (When DHCP is enabled, this item will be disabled) Gateway DVR should have proper Gateway address to communicate with external network. This information should be given from the network administrator. (When DHCP is enabled, this item will be disabled) DNS DVR should have proper DNS address to use various network services such as WRS, NTP, and so on. Please ask this information to network administrator. (When DHCP is enabled, this item will be disabled) DDNS Menu Network DDNS User can give a domain name to a DVR by using WEBGATE s DDNS service, WNS(Webgate Naming Service). DDNS setting at DVR DDNS setting at a DVR 1. Change DVR s port which is not in use (e.g. 8000) 2. Configure router s port forwarding setting. (i.e. port 8000 should be connected to DVR) 3. Activate DDNS(WNS) at DVR menu 4. Enter domain to use then click on change domain.(ex: test) 5. If the entered domain name is available, DVR shows Success. If the domain name is occupied by another user, DVR shows Unavailable domain. 6. If you can connect a DVR by using assigned domain name, it means DDNS setting is properly completed. (e.g. <Note> It takes about 10 min to be connected after domain created. 5

6 Record Configuration Menu Record Program Continuous Recording - The maximum recording performance for Normal and Event recording 1. Menu > Record > Record > Continuous Record > Program A > Program Edit 2. Select Program A and set all channels as Normal Record FPS 30, Quality 7, Event Record FPS 30, Quality 7 (Recording performance may be different according to DVR models) Long-term Recording - The minimum recording performance for Normal recording 1. Menu > Record > Record > Continuous Record > Program B > Program Edit 2. Select Program B and set all channels as Normal Record FPS 1, Quality 7, Event Record FPS 15, Quality 7 Maxium Long-term Recording - Recording only for event 1. Menu > Record > Record > Continuous Record > Program C > Program Edit 2. Menu > Record > Record > Pre Event Duration 5sec > Post Event Duration 5sec > Program Edit 3. Select Program C and set all channels as Normal Record FPS 0, Quality 7, Event Record FPS 15, Quality 7 6

7 Playback Search name function description 1 Playback button Use buttons to control the playback. 2 screen Displays the playback videos. log viewer Displays the log seen on timeline 3 Calendar/time Select a date on the calendar to view the data of the date. search 4 timeline Displays the info of the unit and search the playback sections. 7

8 Time search If the user enter a date and time and click time moves to that time., DVR s playback Calendar search When calendar search is run, it marks the dates on which there were recordings. Select a date from calendar you want to search, and it moves to that date. Event search Event information on timeline(all, Motion, Sensor, Text, None) will be shown on log viewer. If the user select one of the list, DVR s playback time moves to the event time. Timeline search If the user clicks a position on the timeline, DVR s playback time moves to that time. Thumbnail Search Thumbnail search will show 35 different thumbnail image on detected images by time interval or motion. Click on selected image for playback or copy. Time interval : 35ea thumbnail images are displayed by searching image between entered start and end time. Motion detection : 35ea thumbnail images are displayed by searching image on the motion between entered start and end time. 8

9 Remote monitoring & control Users can connect DVRs, control and monitor it remotely by using Control Center (WEBGATE s CMS program) Installation of Control Center Execute Control Center Setup vx.x.x.exe to install the Control Center. Start of Control Center After installation is completed, click Control Center Monitor icon and execute it. (ID : admin / Password : admin) Screen configuration of Control Center Item Description 1 Menu/Toolbar This is menu and function button used in program 2 Unit list window This indicates unit/viewset/map registered in program. User can click on the list to show image 3 Image window This indicates live monitoring image 4 Status & Action window This indicates status of unit, event information and alarm log 9

10 Add Unit Click [Add] icon on the toolbar or execute [Add Unit] by clicking mouse right button at My Units. 1) Select URL/IP Adress 2) Enter proper IP address and Port, then click [Find] button. If the DVR is located inside local network, you can easily find the DVR by clicking [Auto Detect] button. 3) Check whether the unit s information is properly displayed. 4) Enter DVR s ID and pasword, then click [OK]. 5) DVR will be listed on the unit list of My Units. (DVR Default ID/Password is admin/12345) DVR s Live display If you click a unit s icon in the My Units, you can get live monitoring display. Split-screen will be displayed to show all channels of the unit. 1 2 All channel display at the same time 1 If you click a unit s icon, all channels' video will be displayed on the split-screen. Display a specific one channel 1 If you drag a camera icon and drop it to one of split-screen, video from the camera will be displayed on the screen. 10

11 Port Forwarding & P2P Cloud Manual port forwarding (1) Connect to a router by default IP address. (2) Go to Port range forward setup page. (3) Set DVR IP address & Port of DVR connected to the router then check Enable and save. (4) Connect to IP and Port number of DVR which are assigned from PC to router.there will be Webviewer login page once DVR connection is successful. (DVR default port : 80) (5) Check the router's internet address (Public IP address) to access to the DVR from external network. 11

12 (6) Connect to external internet IP address of router and DVR s setup port. If DVR connection is successful, you may see Webviewer s login page of DVR. (7) Enter ID and Password of DVR 의 to see monitoring page in which live image of DVR is displayed. UPnP port forwarding When using Internet Sharing device(router) which supports UPnP, this function will let users to have an easy access to many DVRs that are connected to the internet sharing device. (1) Set DHCP ON for DVR(A) and DVR(B). (2) Connect a DVR to an Internet Sharing Device and confirm that a public IP address is allocated. (3) Set 81 to DVR(A) and 82 to DVR(B) as DVR port number. (4) Configure UPnP function of Internet Sharing Device as ON. (5) Configure UPnP Port Forwarding function of DVR as ON. (6) Confirm Port Forwarding Status message is changed from Not Available to Port Mapping is OK. (7) If a user accesses to Internet Sharing Device using port 81, it connects to DVR(A), and if accessed using port 82, it connects to DVR(B). P2P Cloud * Users can easily connect DVRs through Mobile application, WebEye, and can perform monitoring. (1) Execute WebEye, click Add(+) button and select P2P tab. (2) Enter a Unit name and the UID. User can directly enter the UID from the UID sticker sticking on DVR cover. Alternatively, user can find the UID by clicking P2P cloud button at DVR menu > Network, or user may take a picture of QR code. (3) Enter the DVR password first. Then clicking the Find button will show DVR name and model name. (4) Save the setting and click the registered unit in order to see the video * Varies between different models 12

13 The World s first certified by HDcctv Alliance ENGLISH Premium to your HD-CCTV W E B G A T E WEBGATE Div, Daemyung Corporation Co., Ltd. 6F,Hanlim Venture Town B/D, 284, Gongdan-ro, Gunpo-si, Gyeonggi-do, Korea(15809) Tel Fax sales@webgateinc.com 13