1.25 in (32 mm) depth in (119 mm).31 in (8 mm) profile

Transcription

1 2.94 in (75 mm) Shown actual size: 6-button hybrid keypad in White (RRD-H6BRL-WH) and 1-gang Claro wallplate (sold separately) in White (CW-1-WH) Direct lighting loads Incandescent/halogen Magnetic low-voltage Tu-Wire fluorescent 1.25 in (32 mm) depth 4.69 in (119 mm).31 in (8 mm) profile Features and capacities Hybrid keypads function as a dimmer and a keypad combined into a single device, to eliminate the need for extra wiring and construction Keypads incorporate advanced features such as fade on/fade off and pre-selected scenes Scenes can be fine-tuned by pressing and holding the raise/lower buttons to adjust lights or shades Backlit buttons Available with neutral wire terminal that allows keypads to be installed in either two-wire or neutral wire installations (neutral wire recommended) Coordinating Claro, Satin Colors and Stainless Steel wallplates only (available separately); not compatible with non-lutron wallplates, see pg. 408 For information on engraving, text symbols, or backlit buttons/backlit text, see pgs A RadioRA 2 system can have up to 100 devices per main repeater, and up to two main repeaters per system (requires qualification of installer) Works with Sivoia QS wireless shades via main repeater (pg. 268) Maximum load 450 W/450 VA two-wire or neutral wire, 120 V Dimensions and mounting Width: 2.94 in (75 mm) Height: 4.69 in (119 mm) Depth: 1.25 in (32 mm) Profile:.31 in (8 mm) Mounts into a 1-gang U.S. backbox, 3 in (89 mm) deep recommended, 2 in (57 mm) deep minimum Communication and wiring Download specification submittal Download high resolution product image Download engraving sheet (button kit) Communicates via Lutron reliable Clear Connect RF technology to other Lutron wireless devices, on a 434 MHz band Operates at 434 MHz Keypads must be located within 30 ft (9 m) of a main/auxiliary repeater 128 Volume 2 P/N

2 Available finishes Faceplate F Buttons B Engraving E Use BOLD color code in model number (Example: RRD-H6BRL-WH) Gloss finishes* WH LA White F, B Light Almond F, B Satin finishes* AL Almond F, B IV Ivory F, B GR Gray F, B BR Brown F, B BL Black F, B SW Snow F, B LS Limestone F BI Biscuit F, B ES Eggshell F, B PD Palladium F TP Taupe F, B ST Stone F, E BG Bluestone F PL Plum F TQ Turquoise F GS Goldstone F Ivory B DS Desert Stone F GB Greenbriar F MS Mocha Stone F TC Terracotta F SI Sienna F Brown B HT Hot F MR Merlot F MN Midnight F, B SS ** Stainless Steel F Black B * Coordinating wallplates only available separately. For wallplate information, see pg ** Stainless Steel wallplate includes black plastic trim/adapter, visible from side. Match with separate Black (BL) or Midnight (MN) controls Volume 2 P/N

3 Explanation of features Features Dimmer Default location for toggle dimming of connected load. Can be changed with programming 2 Status LEDs Show status of lights or shades assigned to button 3 Keypad buttons Press to activate desired levels or positions of lights or shades RadioRA 2 hybrid keypad 4 Backlit buttons Easy to find and read in low-light conditions.31 in (8 mm) 1.25 in (32 mm) 5 Raise/lower buttons Lights increase or decrease in intensity or shades/draperies move towards the open/close limit 6 FASSTM Front Accessible Service Switch to disconnect power from the load for service 130 Volume 2 P/N

4 Model numbers Incandescent/halogen or Magnetic low-voltage (MLV) 3-button, 2-button with RRD-H1RLD-XX 1 raise/lower dual group keypad 2-button with raise/lower RRD-H2RLD-XX 1 dual group keypad 3-button with raise/lower keypad RRD-H3BSRL-XX 1 4-button keypad RRD-H4S-XX 1 5-button with raise/lower keypad RRD-H5BRL-XX 1 6-button with raise/lower keypad RRD-H6BRL-XX 1 Two-wire or neutral dimmer. Minimum load with neutral 15 W/VA; without neutral 50 W/VA. Compatible with RadioRA 2 systems. Engraved replacement kits 3-button, 2-button with RKD-H1RLD-XX 1 -E 1 raise/lower dual group keypad 2-button with raise/lower RKD-H2RLD-XX 1 -E 1 dual group keypad 3-button with raise/lower RKD-H3BSRL-XX 1 -E 1 keypad 4-button keypad RKD-H4S-XX 1 -E 1 5-button with raise/lower RKD-H5BRL-XX 1 -E 1 keypad 6-button with raise/lower RKD-H6BRL-XX 1 -E 1 keypad Compatible with RadioRA 2 hybrid keypads. XX 1: Gloss and Satin Colors codes, see pg. 129 (Wallplates not included. Order separately, see pg. 408) E 1 : Engraving codes, see pgs For specific radio frequency by country, refer to the radio frequency chart on pg For specific voltage by country information refer to the voltage chart on pg Volume 2 P/N

5 Wallplates and accessories Engraving Engraving, backlit buttons/text, and icon table overview seetouch QS and International seetouch QS keypads and GRAFIK Eye QS main unit engraving codes Omit Unengraved Ships with engraving certificate that customer can redeem at no charge EGN Standard Engraving SGN Symbol-based Engraving Off Lighting keypad Open Preset Close Shade column NST Non-standard Text Engraving When ordering product with non-standard text engraving (NST) a completed engraving form must be submitted. Product will ship engraved as specified by customer. Backlit buttons/text Depending on color of buttons, engraving is either displayed as backlit text or on backlit buttons. Engraving 10 characters maximum (including spaces) Seven characters maximum (including spaces) when using ALL CAPS Seven characters maximum (including spaces) when using an icon (see next page for icon codes) Text engraving color varies by button color. Lighter colored buttons use gray text and darker colored buttons use white text. Visit com/engraving for further information. Example Open For open icon window #1: Text Icon code O p e n 0 1 Seven characters maximum when using icon Backlit buttons, typically on lighter colored buttons Backlit text, typically on darker colored buttons (BR, BL, SI, MN) Download engraving sheets: GRAFIK Eye QS main unit (button kit) GRAFIK Eye QS main unit (faceplate) RadioRA 2 seetouch wireless keypad (button kit) RadioRA 2 tabletop keypad (button kit) seetouch QS keypad (Architectural matte and metal finishes) seetouch QS keypad (Satin finishes) International seetouch QS keypad 436 Volume 2 P/N

6 Wallplates and accessories Engraving Lutron character symbols - icon table APPEARANCE ON: 64. * Light button colors include: ** Dark button colors include: White (WH) Beige (BE) Almond (AL) Biscuit (BI) Snow (SW) Black (BL) Ivory (IV) Gray (GR) Light Almond (LA) Eggshell (ES) Taupe (TP) Brown (BR) Volume 2 P/N