ZA-H8N9 Motherboard. User Manual. Intel Corei7/Corei5/Corei3 Pentium Processor

Transcription

1 ZA-H8N9 Motherboard User Manual Intel Corei7/Corei5/Corei3 Pentium Processor Version:1.0 Issue Date:08/2016

2 ZA-H8N9 Motherboard Configuration Diagram 1

3 ZA-H8N9 Motherboard Diagram 2

4 Catalog ZA-H8N9 Motherboard Configuration Diagram...1 ZA-H8N9 Motherboard Diagram...2 Chapter 1 Hardware Installation Precautions Before Installation...3 Chapter 2 Introduce The System Board Motherboard Specification...4 Chapter 3 Motherboard I/O Interface Diagram...5 Chapter 4 Hardware Characteristics...6 Graphics/LAN/USB/Hard Disk Interface...6 Hard Drive Power Supply/Other Onboard Pin/ COM COM/Other Onboard Pin LVDS Wiring Specification...9

5 Chapter 1: Hardware Installation 1-1 Precautions Before Installation Precision integrated circuits and other components, which are easily damaged by static electricity. Please read this manual before installation and prepare for the following: Please confirm that the chassis size is in line with the motherboard before installation. Before the installation, please do not tear up the motherboard serial number and dealer warranty sticker, otherwise it will affect product warranty period identified standard. Be sure to turn off the power and remove the power cord from the socket before installing or removing the motherboard and other hardware device. When installing other hardware devices to the socket on the motherboard, make sure that the interface and socket are tightly integrated. Please take the motherboard do not to touch the metal wiring part to avoid short circuit. Take the motherboard, CPU or Memory, it is best to wear anti-static bracelet. If there is no anti-static bracelet, make sure your hands are dry and touch the metal at first to eliminate static electricity. The motherboard is not installed, please put in anti-static pad or anti-static bag. Make sure the power is turned off when you pull the plug on the motherboard socket. Before you turn on the power, make sure that the voltage value of the power supply is the standard voltage set in the area. Before the power on please make sure all hardware devices and power line are correctly connected. Do not allow screws to touch the circuit or other parts on the motherboard to avoid damage to the motherboard. Make sure there are no screws or metal products left on the motherboard or in the computer case. Please do not place the computer host in the unstable place. Please do not place the computer host in a high temperature environment. If the power is turned on during installation, it may cause damage to the motherboard, other devices or yourself. If you are not familiar with the installation, or use this product have any technical problems, please consult a professional technical staff. 3

6 Chapter 2: Introduce The System Board 2-1.Motherboard Specification Model NO. Size CPU Memory Graphics Chipset Rear I/O Internal I/O SATA BIOS LAN MINI-PCIE H/W Monitoring Audio Operating System Temp. Humidity ZA-H8N9 220mm x 170mm Intel Corei7/Corei5/Corei3 Pentium Processor 2* DDR3 Slot,1333/1600MHz,204PIN,SOMIDD Slot, Dual Channel,Up to 32GB NVIDIA GTX950 B85 1* DC Power Input (19V) 1* HDMI 1* VGA 2* USB2.0 And USB3.0 1* L AN 1* Mic-in/Line-out 2* USB 2.0 PIN, 1*USB3.0 PIN 1* CPU Fan And SYS Fan 1* GPU Fan 1*LVDS Pin Support Dual Channel 8Bit 1*VGA Pin Port 4*SATA 1*Front panel Pin 1*Audio Pin Port 4* SATA AMIBIOS,64M bit Flash Memory 1*Realtek 8111E,10/100/1000M 1 MINI-PCIE Support MSATA, 1 Support WiFi Temperature Management,Voltage Management,System Power Management ALC662 Dual Channel Output Windows7, Windows 8,Windows10, Linux -10 C ~ 55 C 0% ~ 95% (Relative Humidity,No Condensation) 4

7 Chapter 3: Motherboard I/O Interface Diagram ZA-H8N9 Motherboard USB3.0_F1 FUSB2 INVERT1 GNDFUSB1 LVDS1 SATAIII_2JSATA1 JSATA2 SYS_FAN1 SYS_FAN2 VGA_FAN1 CPU_FAN MSATA1 DPI0 VGA2 DIMM1 DIMM2 WIFI1 FP1 SPK1 CMOS_BT1 19VDC HDMI RJ45 USB3.0 USB2.0 JSATA SATAIII_1 MIC/LINEOUT

8 Chapter 4: Hardware Characteristics Graphics Display Description Display Chip And Core NVIDIA GTX950 Db15 Interface And 1*12PIN Interface 1*12PIN VGA PIN Definition: Interface Type VGA LAN Description Chip Card Realtek RTL8111E Function 10/100/1000M bps Adaptive,support PX E boot, support remote wake-up Interface Type RJ45 NIC Lamp Definition Custom USB Description Interface Type USB 2. 0/USB3.0 Interface Rear Interface 4 USB PIN Definition: Internal PIN 1. VCC 2. VCC 3. DATA0-4. DATA1-5. DATA0+ 6. DATA1+ 7. GND 8. GND 9. NC(CUT) 10. GND Interface And PIN Type Hard Disk Interface Interface Type PIN Definition Notice : 1*4Pin header/2.54mm Description 4*SATA Port;1*MSATA Standard Please use the SATAPORT with our collocation power line,can not be replaced. 9

9 COM1 and COM2 the first feet can be passed the FUN1 and FUN2 jumper setting Power Type And Mode PIN Define V 3-4 DCD V COM2_FUNC2 Jumper Selection COM2 Working mode PIN Define Normal PIN Define TTL PIN And Interface Type 2*3pin 2.54mm LVDS Wiring Specification 1. Specification For Wiring: LVDS 1. Wiring specification: 10

10 2. Circuit board power supply selection: 19 4.Inverter Setting: 19 INVERT *Other Matters Please consult the sales.