High-end features. Full 3D visualisation and simulation.

Transcription

1 DATA SHEET Numerical control VisiTouch 9 VisiTouch 9 MX VisiTouch 9 is an outstanding numerical control for pressbrakes composed of two main hardware elements: A programming console with 9 modern streamlined glass surface touch screen, generally attached to a swiveling arm. A Numerical Control in an all-in-one housing, placed inside the electrical cabinet, with analog and digital I/ Os, sufficient to control axes, typically Y, Y2, X and R. For more complex machines, additional axes and I/O can be added via two CANopen or one EtherCAT field buses. VisiTouch 9 is available in two versions: VisiTouch 9 with graphical profile drawing (Touch Profile) and precise 2D program creation. VisiTouch 9 MX with 3D visualization, 3D import and full automatic solutions. In addition to all the features available to control simple as well most sophisticated press brakes, VisiTouch offers also an open system allowing customization. Main CNC and HMI features Main features Based on CybTouch software with a very user friendly HMI thanks intuitive programming and an ease to set up with dedicated wizards (auto-tuning). All kinematics available for X, Xrelatives, Xslave, R, Rslave, and Z axes. For Back and Front multiples gauges. For bending aids. Axis control through CANOpen with wide configuration capabilities. Open system through customizable «User Cycles» and plug-in software modules. Customizable User buttons for the machine operator. High-end features Full 3D visualisation and simulation. Parts management with DXF flat pattern and 3D format files import. Automatic solutions of complex parts: automatic bend sequencing, gauging, toolig and auto segmentation. Running under Windows for multitasking and networking. All bending aid kinematics available. Back and Front multiples sets. Angle measurement. Software open features PLC functionalities. Interactions with the beam cycle. Custom auxiliary functions. integration based on «UserCycles» for real time part and on plug-in for HMI part. Custom User buttons. Cybelec S.A. /

2 Technical Characteristics - VisiTouch 9 programming Console TFT screen.5 wide TFT 6:9 Resolution Touch screen USB ports Power Supply Seal Handle Operating conditions Weight Languages 366 x 6, 2 bits (WXGA) Multi-touch 0 fingers x USB 2.0, 0.5 A current capability each 0.A max. IP65 - front side only Included Min. 5 Celsius, max. 0 Celsius. If the ambient temperature approaches or exceeds 0 Celsius, it is advisable to install special ventilation, or even air-conditioning. Relative humidity (0 to 5% non-condensing). Chinese (simplified and traditional), Croatian, Czech, Danish, English (reference language), French, German, Hungarian, Italian, Polish, Russian, Slovenian, Spanish, Turkish. 2/ Cybelec S.A.

3 Technical Characteristics - CybCNC3 controls Processor Unit Mass Storage Model Graphic RAM Cooling Capacity Interface CybCNC3 2D AMD G-Fusion T0E Dual GHz ATI Radeon HD series built-in GB DDR3 RAM Passive Heat sink, FAN less 32 GB CFAST memory card SATA CybCNC3 MX (3D) Intel Atom x-e3950 Quad Intel Gen 9LP Graphics GB DDR3 RAM Passive Heat sink, FAN less 32 GB CFAST memory card SATA Display Interface DVI Up to 920x200, single-link DVI-D interface Communication Port HMI non Realtime Operating temperature 0-0 C Power Supply (Numerical Control) LAN Gigabit Ethernet, RJ-5 (0/00/000) USB USB 2.0 port typ.(cn without I/O X connector) RTC Calendar Clock Battery Lithium CR2032 / I/O Processor ARM Cortex M series Digital Input 32 ma typ. according to IEC63-2 type & 3 Isolation 2kV Filtering debouncing and deglitching (by step of 0µs) Digital Output 6 0.5A typ. /0.A max. according to IEC63-2 type 3 3A typ. /5A max. according to IEC63-2 type 3 Isolation 2kV Overvoltage and Short circuit protection Status output in fault and no 2V IO power supply Analog Input Unifilar or differential Resolution 0-0V 2-bit (-bit + sign) Analog Output 6 Unifilar Resolution ±0V 2-bit (-bit + sign), output at 0Vin fault state Resistive load kω min. / capacitive load 2.2nF max Analog Voltage Reference Unifilar Voltage V 50mA max. Encoder Interface 5V or 2V, unifilar type PNP/NPN or differential Frequency 500 khz (signal A/B) 5 MHz (signal A/A/B/B) Aux. Power output (typically x 0mA) Power Supply (Digital Inputs/ Outputs) 20A max. Serial Communication RS-232C/RS-5, D-sub 9-pin male Data flow 5kbps Fieldbus Interface 2 CAN Mbps CAN 2.0 A, RJ-5, CANopen Master EtherCAT 00Mbps EtherCAT, RJ-5, Master System Cybelec S.A. 3/

4 Dimensions Console version x Ø R3.5 R ø Attachment dimensions A B 0 0 x x 60 or 65 x 65 0 x 0 x Two adapters are provided. Stick the appropriate one on top of the box. / Cybelec S.A.

5 Dimensions Panel version Integrating opening dimensions Cybelec S.A. 5/

6 Dimensions CybCNC3 controls, ,5 5,5 SPEED Ethernet LNK/ACT 2 3 USB 33,5 32 BTO CAN2 Power On HD Activity 5VStby RUN LNK/ACT 2 DVI X2 X3 X X X +2Vdc 0V PSTAT PSON X6 X X ,5 6/ Cybelec S.A.

7 VisiTouch range and options Programming Console S-VST-9 S-VST-9/P VisiTouch console version 9, glass surface touchscreen VisiTouch panel version 9, glass surface touchscreen CybCNC3 controls S-CNC-3PS2 S-CNC-3PS3 CNC unit, axes (Y, Y2, 2 axes), PS-2D license CNC unit, axes (Y, Y2, 2 axes), PS-MX license (3D) CybMVA modules S-MVA-CF S-MVA-MF2 S-MVA-MF S-MVA-MF6 S-MVA-MF Compact module, valve control with feedback Multi module, valve control with feedback and 2 additional axes Multi module, valve control with feedback and additional axes Multi module, valve control with feedback and 6 additional axes Multi module, valve control with feedback and additional axes Optional software licenses S-OFT-_AX S-OFT-_USER_IO S-OFT-BAH S-OFT-AM S-OFT-VST/TDM S-OFT-IMPORT S-OFT-VST2D S-OFT-VST3D Additional axis license Additional user IO license; DI/DO/AI/AO Bendind aids and sheet support Angle measurement Tandem management Import license, DXF flat, IGES, SAT, STEP, X_T (parasolid) Offline software license, VisiTouch 2D Offline software license, VisiTouch MX (3D) Wires S-CNF-DVID050 S-CNF-US2AB050 DVI wire.5m, according to Cybelec specs USB 2.0 extention wire,.5m, according to Cybelec specs All specifications are subject to modification without notice VisiTouch, all rights reserved / Cybelec S.A. Cybelec S.A. Rue des Uttins 2 CH-0 Yverdon-les-Bains Switzerland info@cybelec.ch Tel Fax