Q.brixx station 101. Base Unit with Test Controller. Most important features:

Transcription

1 Most important features: Q.brixx base unit consists of side handles, Test Controller Q.brixx station and power supply unit, ready for 14 measurement modules in the same housing and up to 32 plug-in modules in external housings Flexibility at high density up to 14 modules in one unit with a individual compilation, various input plugs available Robust and reliable stable and compact aluminum housing, easy to carry temperature range -20 up to +60 C, power supply 10 up to 30 VDC The Q.brixx product line is designed for portable measurements with a high level of flexibility, reliability and accuracy. The range of applications starts from small stand-alone solutions up to networked multi-channel applications in the field of mobile and stationary performance testing and structural monitoring. The wide range of available modules and the flexibility of the system configuration allows an optimized solution for each single task. Up to 14 modules in one system plus a Controller Unit provide a powerful package with PAC functionality, logging possibilities and an Ethernet TCP/IP interface. Conclusion: Dynamic signal acquisition up to 100 khz, inputs and outputs for all types of signals, galvanic isolation of inputs and outputs, multi-channel solutions, high density packaging and intelligent signal conditioning for mobile application. Ethernet interface for configuration and data output 1 Gig-E, TCP/IP, UDP, up to 16 MB/s Modbus TCP/IP, ASCII, High Speed Port Fieldbus interface EtherCAT-Slave, 1024 variables read and write at 10 khz 1 x CAN, 2 x USB 2.0, 4 MB/s Synchronization and time stamp of measurement values IRIG 2 based master slave principle on RS485 standard system synchronization ±1 µs applicable Data buffer memory dyn. 500 MByte, stat. 4 GByte expandable over USB (up to measurements/s) and SATA 8 digital I/O direct connection of encoder for fast angle measurement frequency, PWM and counter measurements, state signals, watch dog Display Port DVI interface to visualize standard and individual screens (HMI PAC functionality with extensive library (T versions) Sequences, data logger, PID-controller, transfer functions, mathematic, numeric, Boolean combinations, functions generator

2 Micro Controller Typ RAM Flash Real Time Clock (RTC) OS Atom Z530; 1,6 GHz 1 GByte, 500 MByte available for data memory 4 GByte Battery buffered Real Time Linux Ethernet Interface Number of channels Baud Rate Data rate Protocolls Isolation voltage 2048 Byte Data (512 variable read and 512 variable write) 1 Gigabit/s (1-Gig-E) Online and block transfer up to 16 MByte/s (32 variables at 100 khz) TCP/IP, UDP, Modbus/TP/IP, ASCII, High Speed Port 500 V EtherCAT Interface - Slave Standard Ethernet Number of channels 4096 Byte Data (1024 variables read and 1024 variables write) Baud Rate 100 Mbps Cycle time 100 µs Isolation voltage 500 V CAN Interface Number 1 Kind Configuration Optional pure CAN per DBC files CANOpen RS 485 Slave Interfaces for System Extension Number 2 Baud rate Connectable devices Isolation voltage 9,6 kbps up to 48 Mbps ( measurements/s) max. 16 modules at one UART 500 V USB Interface Number 2 Version USB 2.0 Data rate Up to 4 MByte/s (up to measurements/s) SATA Interface Use Interface for data logging

3 Digital Inputs Number 8 Function Input voltage / Input current Upper switching threshold Lower switching threshold configurable counter, frequency, PWM and state signals digital encoders focusing with angle synchronous measurement max. 30 VDC / max. 1.5 ma >3,5 V (high) <1,0 V (low) Digital Outputs Number 4 Function Type of output Output voltage / Output current configurable watchdog and dead man function Open Drain p-channel MOSFET max. 30 VDC / max. 100 ma Synchronization of a Multi Test Controller System Interface RS485 Standard Mode Master Slave Prinzip, IRIG 2 Standard Synch. master and slave Accuracy System synchronization ±1 µs Power Supply Power supply Power consumption 10 up to 30 VDC, over voltage and overload protection external power supply unit 115 VAC/230 VAC included base unit 12 W, additionally 2 W each module Plug Options of the Modules Standard pluggable screwing terminals Option multifunctional Inputs: DSub 9 voltage inputs and outputs: BNC thermocouples: TCK others on request: Display (externally) Display Interface Configuration external Display DVI standard or customized content (HMI)

4 Environmental Operating temperature Storage temperature Relative humidity -20 C up to +60 C -40 C up to +85 C 5 % up to 95 % at 50 C, non condensing Mechanical Case Dimensions base unit (W x H x D) Width of one module Use Aluminum (135 x 125 x 155) mm 30 mm desk top, all connectors located on unit front PAC Functionality Cycle time Processing 1 ms cyclic or synchronized with data acquisition Functional Diagram

5 Q.brixx station 101 Base Unit U with Test Controller Logging function With Test Controller Q.brixx station a very flexible and powerful data logging is possible. possible Four data buffers (RAM) with different configurable data rates can be assigned to the measurement and I/O signals. According to the he configuration of up to 4 loggers occurs the logging of the buffer data at a selectable medium (intern. Flash, USB, SATA) with selectable logging rates, storage duration, start and stop trigger (auto start, condition, touch) ouch) with or without pre- and post-trigger. Gantner Instruments uments Test & Measurement GmbH office@gantner-instruments.com office@gantner Silvrettastraße Schruns / Austria T +43 (0) F +43 (0) Heidelberger Landstraße Darmstadt / Germany T +49 (0) F +49 (0)

6 1 Exemplary logger configuration with the software test.commander Graphical programming of real-timee functions (T version) and additionally an individual display (DVI) with test.con Studio With test.con Studio it is possible to program graphically application-specific functions (control flow calculations, calculations, controller, combinations etc), and to design an individual display and control panel (touch screen of the controllers or PC) and load this package into the Controller Q.station T or Q.station DT. Silvrettastraße Schruns / Austria T +43 (0) F +43 (0)

7 Create functionality using a library of function blocks: Designing the display of the Q.station or the PC screen, followed by combining the signals with visualization and operating elements: Downloading the application into the test controller Q.brixx station and/or into the PC to run on the run time version of test.con Studio. Operation and visualization over Q.brixx station DVI, PC or mobile device via VNC: Due to the separation of real time and user tasks of the controller (real time kernel, user kernel) it is warranted that pretentious high speed tasks like dynamic logging or fast PID will run stable and independent from the very flexible and individual tasks like visualization and operation.

8 Valid from August Specification subject to change without notice DB_Q.brixx_station_E_21.docx