TRASFORMATORE TOROIDALE DI SICUREZZA SAFETY TOROIDAL TRANSFORMER
|
|
|
- Jeffery Copeland
- 5 years ago
- Views:
Transcription
1 TRASFORMATORE TOROIDALE DI SICUREZZA SAFETY TOROIDAL TRANSFORMER CODE: TFR0046RALF DOCUMENT: DSC00010 OGGETTO OBJECT AUTORE EDITOR DATA DATE DESCRIZIONE DESCRIPTION APPROVATO APPROVED 1 st Edition Laura Biccini Fabio Batocchi 1 st Edition Rev.A Fabio Batocchi Rimosse le ultime 3 pagine Removed the last 3 pages G. Pelagrilli POS. INDICE - INDEX 1 Standard applicati - Standards applied 2 Caratteristiche Tecnico-ambientali - Technico-environmental characteristics 3 Caratteristiche Elettriche - Electric characteristics 4 Caratteristiche Dimensionali - Dimensional characteristics 5 Caratteristiche Costruttive - Constructive characteristics 6 Caratteristiche di Protezione - Protection characteristics 7 Schema elettrico - Electric layout DATASHEET TFR0046RALF Page 1
2 1 Standard applicati - Standards applied Direttiva CE: Direttiva Bassa Tensione e Direttiva Compatibilità Elettromagnetica EC Directives: "Low Voltage Directive" & "Electromagnetic Compatibility Directive" Sicurezza dei trasformatori, alimentatori e simili - Safety of power transformers, power supply units and similar Apparecchiature per la tecnologia dell informazione Caratteristiche Disturbi Radio Information technology equipment Radio disturbance characteristics Apparecchiature per la tecnologia dell informazione Caratteristiche di Immunità Information technology equipment Immunity characteristics Compatibilità Elettromagnetica EMC Electromagnetic Compatibility EMC 2006/95/ECC 2004/108/ECC EN : EN /EC1: EN /A1: EN : EN55022/B: EN55022/EC: EN55024: EN : EN /A1: EN /A2: EN : Caratteristiche Tecnico-ambientali - Technico-environmental characteristics Condizione di Servizio - Service condition Temperatura operativa - Operation temperature Grado di protezione - Degree of protection Umidità relativa senza condensa - Relative Humidity without condensation Continuo - Continous -10 C / +50 C IP00 5 % 90 % DATASHEET TFR0046RALF Page 2
3 3 Caratteristiche Elettriche Electric characteristics Frequenza nominale Rated Frequency Tensione di Ingresso Nominale Rated Input Voltage Tensione di Uscita Nominale Rated Output Voltage Corrente di Uscita Nominale Rated Output Current Potenza di Uscita Nominale Rated Output Power Min Typ Max Unit Hz Vrms 12 Vrms 6.25 A 75 VA Corrente di Ingresso a Vuoto all Avvio NO Load Input Current at Start-up (Vin=230Vrms) 20 marms Fattore di Potenza a vuoto all Avvio NO Load Power Factor at Start-up (Vin=230Vrms) Tensione di Uscita a Vuoto all Avvio NO Load Output Voltage at Start-up (Vin=230Vrms) 13.7 Vrms Corrente di Magnetizzazione all Avvio Magnetizing Current at Start-up (Vin=253Vrms; NO Load) 40 marms Perdite del Nucleo all Avvio Core Losses at Start-up (Vin=230Vrms; NO Load) 1 W Corrente di Uscita all Avvio Output Current at Start-up (Vin=230Vrms; 75VA) 6.25 Arms Corrente di Ingresso a Pieno Carico all Avvio Full Load Input Current at Start-up (Vin=230Vrms; 75VA) 400 marms Fattore di Potenza a Pieno Carico all Avvio Full Load Power Factor at Start-up (Vin=230Vrms; 75VA) Tensione di Uscita a Pieno Carico all Avvio Full Load Output Voltage at Start-up (Vin=230Vrms; 75VA) Vrms Potenza Attiva di Ingresso all Avvio Active Input Power at Start-up (Vin=230Vrms; 75VA) 91.0 W Rendimento all Avvio Efficiency at Start-up (Vin=230Vrms; 75VA) Corrente di ingresso a vuoto dopo 3 ore NO Load Input Current after 3 hours (Vin=230Vrms) 20 marms Fattore di Potenza a Vuoto dopo 3 ore NO Load Power Factor after 3 hours (Vin=230Vrms) Tensione di Uscita a Vuoto dopo 3 ore NO Load Output Voltage after 3 hours (Vin=230Vrms) 13.7 Vrms Corrente di Magnetizzazione dopo 3 ore Magnetizing Current after 3 hours (Vin=253Vrms; NO 40 marms Load) Perdite del Nucleo dopo 3 ore Core Losses after 3 hours (Vin=230Vrms; NO Load) 1 W Corrente di Uscita dopo 3 ore 6.25 Arms DATASHEET TFR0046RALF Page 3
4 Output Current after 3 hours (Vin=230Vrms; 75VA) Corrente di Ingresso a Pieno Carico dopo 3 ore Full Load Input Current after 3 hours (Vin=230Vrms; 75VA) Fattore di Potenza a Pieno Carico dopo 3 ore Full Load Power Factor after 3 hours (Vin=230Vrms; 75VA) Tensione di Uscita a Pieno Carico dopo 3 ore Full Load Output Voltage after 3 hours (Vin=230Vrms; 75VA) Potenza Attiva di Ingresso dopo 3 ore Active Input Power after 3 hours (Vin=230Vrms; 75VA) Rendimento dopo 3 ore Efficiency after 3 hours (Vin=230Vrms; 75VA) Rigidità Dielettrica (Primario/Secondario) Dielectric strength (Primary/Secondary) Rigidità Dielettrica (Nucleo/Primario) Dielectric strength (Core / Primary) 390 marms Vrms 89.0 W 3'750 Vac for 1 minute 2'500 Vac for 1 minute DATASHEET TFR0046RALF Page 4
5 4 Caratteristiche Dimensionali - Dimensional characteristics ER 82 mm MAX. (*) mm IR HR 38 mm MAX. mm LZ 15 +/ 5 mm IS 50 +/ 5 mm IP 50 +/ 5 mm LS 65 +/ 5 mm LP 65 +/ 5 mm SS SP ST P1 S1 Faston Isolato Femmina Female isolated faston 6,35 x 0,8 mm Faston Isolato Femmina Female isolated faston 6,35 x 0,8 mm Fascetta applicata sul tubetto, in corrispondenza della sua estremità Strap applied on the tube, in correspondence of its extremity Primario: Nero/ Nero Primary: Black /Black Secondario: Rosso/Rosso Secondary: Red/Red (*) Uscita dei fili non inclusa. Lead wire not included. DATASHEET TFR0046RALF Page 5
6 5 Caratteristiche Costruttive - Constructive characteristics Classe di temperatura del trasformatore completo Temperature class of the complete transformer Filo di Rame del Primario Primary Copper wire Filo di Rame del Secondario Secondary Copper wire Nucleo Core Isolamento Nucleo Core Insulation B (130 C) H (180 C) H (180 C) Iron/silicon Annealed Oriented Grains Dimensions: 72.5 x 40.2 x 25.4 mm Mylar 0.04mm. 4 layers 50% superimposed Isolamento Primario/Secondario Primary / Secondary Insulation Isolamento Esterno External Insulation Filo Conduttore Lead wire Mylar 0.05mm thickness 3 layers 50% superimposed Mylar 0.04mm thickness 2 layers 50% superimposed UL V 150 C 6 Caratteristiche di Protezione - Protection characteristics Protezione Termica 120 C Approvata UL / VDE Thermal Protector 120 C Approved UL / VDE 120 C 7 Schema Elettrico - Electric layout DATASHEET TFR0046RALF Page 6
POWER TRANSFORMERS, 1VA TO 180VA, FOR NORTH AMERICA, EUROPE
General Specifications: Input Voltage/Frequency: Single Primary: 120VAC/60Hz for N.A. Models 230VAC/50Hz for Euro. Models Dual Primary: 120/240VAC, 50-60Hz Models * For 115VAC, 115/230VAC, add an X after
ALIMENTATORI POWER SUPPLIES
ALIMENTATORI POWER SUPPLIES ALIMENTATORI SPECIALI SPECIAL POWER SUPPLIES TL 1301 Alimentazione a 12 Vdc per sensori e altre apparecchiature. Ideale per piccoli spazi 12 Vdc power supply for detectors and
Gas Discharge Tube. Indicator Light(2) UL Parallel 1600 V N N / PU-20KS10KTTN. UL Series 1600 V N N 15 A PU-20KD10KTTN
Features 90305 Vac Working Input Voltage 15 ka Maximum, 10 ka Nominal (15 strikes) Surge Current Rating Using Industry Standard 8/20us Wave UL1449 Type 4, EN 6164311 IEEE C62.41.2 Location Category C High
Technical Specifications
Technical Specifications DESCRIPTION The OEM (MOME) board allows System Integrators to implement the communication with a Smart Meter via Band A Power Line (PLC). MOME board can be interfaced with all
E-STOP relays, safety gate monitors
Safety relay for monitoring E-STOP pushbuttons and safety gates. Approvals Unit features Positive-guided relay outputs: 2 safety contacts (N/O), instantaneous 2 safety contacts (N/O), delay-on de-energisation
Energy Management BUS Adapter Type VMU-B 01
Energy Management BUS Adapter Type VMU-B 01 RS485 (Modbus) to M-Bus communication adapter EM21-72D, EM24-DIN and EM33-DIN self recognition Front diagnostic LED s Universal 18 to 260 VAC/DC power supply
AT series M30 cylindrical inductive sensors
series inductive sensors warranty features warranty Wide range of models: standard, long Output:, M2 and plug exit Models with 2, 3, and 4 wires EX models, cat. 3, available on request Models with complementary
ALIMENTATORI: TECNOLOGIA MULTIFUNZIONE POWER SUPPLIES: MULTI-FUNCTION TECHNOLOGY
: TECNOLOGIA MULTIFUNZIONE : MULTI-FUNCTION TECHNOLOGY SPECIALI SPECIAL STABILIZZATI IN BOX STABILIZED IN BOX TL 1301 TL 1207 TL 1210 TL 1215 TL 1215C RIDUTTORI DI TENSIONE STABILIZZATI A 12 VDC 12 VDC
Energy Management BUS Adapter Type VMU-B
Energy Management BUS Adapter Type RS485 (Modbus) to M-Bus communication adapter EM24-DIN and EM21-72D self recognition Front diagnostic LED s Universal 18 to 260 VAC/DC power supply Dimensions: 1-DIN
E-STOP relays, safety gate monitors
Unit features Positive-guided relay outputs: 2 safety contacts (N/O), instantaneous Connection options for: E-STOP pushbutton Reset button LED indicator for: Switch status channel 1/2 Supply voltage See
E-STOP relays, safety gate monitors
Safety relay for monitoring E-STOP pushbuttons and safety gates. Approvals Unit features Positive-guided relay outputs: 3 safety contacts (N/O), instantaneous 2 safety contacts (N/O), delay-on de-energisation
Gelo LED Driver 100W, Single output RGLD100-24
Features Gelo LED power supplies are designed specifically for use in refrigeration, retail display and sign applications. The industry standard footprint and very low profile design provide great benefits
Voltage Current Front-mounting bracket
Switching Power Supply S8PS Compact DIN-Rail Mounting Industrial Power Supplies with Capacities Up to 600 W Models range from 0 W to 600 W. Universal input: voltage range 0 to 240 VAC. Power Factor Correction
Features. Applications and Benefits TRC ELECTRONICS, INC
Features Gelo LED power supplies are designed specifically for use in LED lighting, particularly well-suited for refrigeration, retail display and sign applications. The industry standard footprint and
AT series M30 cylindrical inductive sensors
series M30 cylindrical inductive sensors warranty features warranty Wide range of models:, long Output:, M2 and plug exit Models with 2, 3, and 4 wires EX models, cat. 3, available on request Models with
Argent Angel S series PCB Soldering Power Transformers
Argent Angel S series PCB Soldering Power Transformers LI017V1/2008-EN 1. Features 1 Fully-encapsulated printed circuit board being able to be directly welded and assembled. easy to use, perfect outline;
E-STOP relays, safety gate monitors
E-STOP relays, safety gate monitors Up to Category 2, EN 954-1 Unit features Positive-guided relay outputs: 2 safety contacts (N/O), instantaneous Connection options for: E-STOP pushbutton Reset button
E-STOP relays, safety gate monitors
Safety relay for monitoring E-STOP pushbuttons, safety gates and light barriers. Approvals Block diagram Unit features Positive-guided relay outputs: 6 safety contacts (N/O), instantaneous 4 auxiliary
Positive-guided relay outputs: 4 safety contacts (N/O), instantaneous
Contact expander module for increasing the number of available contacts Approvals Unit features Positive-guided relay outputs: 4 safety contacts (N/O), instantaneous LED indicator for: Switch status channel
Model Number Structure
Solid State Relays CSM DS_E_3_1 Compact, Low-cost, SSR Switching 5 to 20 A Wide load voltage range: 75 to 264 VAC. Both 100-V and 200-V loads can be handled with the same model. Dedicated, compact aluminum
E-STOP relays, safety gate monitors
Safety relay for monitoring E-STOP pushbuttons, safety gates and light barriers. Approvals Unit features Positive-guided relay outputs: 7 safety contacts (N/O), instantaneous 2 auxiliary contacts (N/C),
RE17LAMW on-delay timing relay - 1 s..100 h V AC/ DC - solid state output
Characteristics on-delay timing relay - 1 s..100 h - 24..240 V AC/ DC - solid state output Main Range of product Product or component type Discrete output type Width Component name Time delay type Time
Positive-guided relay outputs: 4 safety contacts (N/O), instantaneous
ohne Abbildung Contact expansion module for increasing the number of available contacts Approvals PZE X4.1P with universal power supply Unit features Positive-guided relay outputs: 4 safety contacts (N/O),
Gelo LED Driver 100W, Single output, Constant Voltage RGLD100-24
Features Gelo LED power supplies are designed specifically for use in LED lighting, particularly well-suited for refrigeration, retail display and sign applications. The industry standard footprint and
E-STOP relays, safety gate monitors
Safety relay for monitoring E-STOP pushbuttons and safety gates. Approvals Unit features Positive-guided relay outputs: 5 safety contacts (N/O), instantaneous 1 auxiliary contact (N/C), instantaneous Connection
RE17LCBM off-delay timing relay - control - 1 s..100 h V - solid state output
Characteristics off-delay timing relay - control - 1 s..100 h - 24..240 V - solid state output Main Range of product Product or component type Discrete output type Width Component name Time delay type
SBB4I2O230 ENG. Fire damper I/O Module. Benefits. Description
Fire damper I/O Module Benefits Ready-to-use junction box housing for fast and easy decentral installation One I/O-module can control and monitor two fire dampers Fast and easy wiring to the main controller
Gas. Rated Indicator Discharge. Load Light(2) Tube
PU20KX10KTXX Features 90305 Vac Working Input Voltage 15 ka Maximum, 10 ka ominal (15 strikes) Surge Current Rating Using Industry Standard 820us Wave UL1449 Type 4, E 6164311 Surge Protective Devices
RE22R1QMQ star-delta timing relay - 230VAC/440VAC - 1 C/O
Characteristics star-delta timing relay - 230VAC/440VAC - 1 C/O Main Range of product Product or component type Discrete output type Device short name Nominal output current Complementary Contacts type
E-STOP relay, safety gate monitor
Safety relay for monitoring E-STOP pushbuttons and safety gates. Approvals Unit features Positive-guided relay outputs: 2 safety contacts (N/O), instantaneous 1 semiconductor output Connection options
Three-phase electricity meter with instantaneous reading of electrical variables. Input current measurement: 5 A, 90 A, 150 A, 250 A (span by model).
SCEE AR 3 - Smart Analyzer 485/Ethernet with web visualization Three-phase electricity meter with instantaneous reading of electrical variables. System variables: V, A, kw, kva, kvar, PF and Hz. Variables
SAFETY RELAY AD SR0 INSTALLATION USE AND MAINTENANCE
SAFETY RELAY AD SR0 INSTALLATION USE AND MAINTENANCE This symbol indicates an important personal safety warning. Failure to comply with the warning may result in very high risk for exposed personnel. INTRODUCTION
SAMSUNG ELECTRO-MECHANICS CO., LTD
Model Name : Features : ㅡ Suitable for LED lighting application ㅡ UL8750, UL1310 Class 2 ㅡ For use in Dry and Damp Location ㅡ Full-protection provided: OCP/OLP/OTP/SCP ㅡ Non potting product Electrical
G3NE. Ordering Information. Solid State Relay. Compact, Low-cost, SSR Switching 5to20A J ACCESSORIES (ORDER SEPARATELY) Solid State Relay G3NE
Solid State Relay G3NE Compact, Low-cost, SSR Switching 5to20A D Wide load voltage range: 75 to 264 VAC. D Dedicated, compact aluminum PCB and power elements used. D Built-in varistor effectively absorbs
Model Number Structure
Solid State Relays with Failure Detection Function G3PC Detects failures in SSR used for heater temperature control and simultaneously outputs alarm signal. This SSR supports the safe design of heater
Efficiency (1) 110Vac 220Vac
LED Driver EUC025SxxxDS 20110110 G Features High Efficiency (Up to 84%) Active Power Factor Correction (Typical 0.92) Constant Output Current Waterproof (IP66) Dimming Control AllRound Protection: OVP,
G3PC. Model Number Structure. Solid State Relays with Failure Detection Function. Model Number Legend
Solid State Relays with Failure Detection Function G3PC Refer to Warranty and Application Considerations (page 1), Safety Precautions (page 4), and Technical and Safety Information (page 6). Detects failures
VER05 Series. xxx Series. 5 Watt. AC-DC Power Supplies. Models & Ratings. Input. Output
5 Watt xxx Series Energy Efficiency Level VI Barrel Jack & USB Versions Interchangeable Mains Connectors Included Universal Input Output Voltages from 5.0 V to 12.0 V Class II Construction Low Cost B R
RM22TG. Product data sheet Characteristics. three-phase control relay Vac, 2 C/O. Main. Complementary. Network number of phases
Characteristics three-phase control relay 183 528Vac, 2 C/O Main Range of product Product or component type Relay type Network number of phases Relay name Relay monitored parameters Time delay type Switching
Solid State Relays Industrial, 1-Phase ZS (IO) w. LED Types RAM1A, RAM1B
Solid State Relays Industrial, 1-Phase ZS (IO) w. LED Types RAM1A, RAM1B Zero switching (RAM1A) or instant-on switching (RAM1B) AC Solid State Relay Direct copper bonding (DCB) technology LED indication
ABL8RPS24100 regulated SMPS - 1 or 2-phase V - 24 V - 10 A
Characteristics regulated SMPS - 1 or 2-phase - 100..500 V - 24 V - 10 A Main Range of product Product or component type Power supply type Input voltage Output voltage Rated power in W Jun 27, 2018 Phaseo
Efficiency (1) 110Vac 220Vac
LED Driver EUC050SxxxDT 20110110 F Features Description The EUC050SxxxDT Series operate from a 90 ~ 30ac input range. These units will provide up to a 4200 ma of output current and a maximum output voltage
Contact protection relay
Contact protection relay Ordering details SVR 450 08 F0000 The protects sensitive control contacts from excessive load. It can be used with latching function or without. Bounce time of control contacts
RE22R1QMQ star-delta timing relay - 230VAC/440VAC - 1 C/ O
Characteristics star-delta timing relay - 230VAC/440VAC - 1 C/ O Main Range of product Product or component type Discrete output type Device short name Nominal output current Zelio Time Modular timing
ABL8WPS24400 regulated SMPS - 3-phase V - 24 V - 40 A
Characteristics regulated SMPS - 3-phase - 380..500 V - 24 V - 40 A Main Range of product Product or component type Power supply type Input voltage Output voltage Rated power in W Jan 11, 2018 Phaseo Power
Functional configuration Rated input voltage Power ratings Output voltage Output current Part number Non-PFC
Switching Power Supply DIN-Rail Mount Power Supply With Capacity Up to 240 W for General or Industrial Applications Wide power range: 15 to 240 W 15 W and PFC Models with Universal voltage of 100 to 230
MODEL: M5DY SEN TRONIC AG CURRENT LOOP SUPPLY. [2] POWER INPUT AC Power M: V AC (Operational voltage range V, Hz)
![MODEL: M5DY SEN TRONIC AG CURRENT LOOP SUPPLY. [2] POWER INPUT AC Power M: V AC (Operational voltage range V, Hz)](/thumbs/90/103899684.jpg "MODEL: M5DY SEN TRONIC AG CURRENT LOOP SUPPLY. [2] POWER INPUT AC Power M: V AC (Operational voltage range V, Hz)")
Super-mini Terminal Block Signal Conditioners M5-UNIT CURRENT LOOP SUPPLY Functions & Features Powering a 0 ma DC current loop Applicable to smart transmitters Isolation between the input and output Fast
7 CONTROLLORI DIGITALI DEL FATTORE DI POTENZA 7 POWER FACTOR CONTROLLERS
CROORI DIGIAI DE FAORE DI POENZA POWER FACOR CROERS CROORI DIGIAI DE FAORE DI POENZA POWER FACOR CROERS CROORI DIGIAI DE FAORE DI POENZA DIGIA POWER FACOR CROERS * Step per serie EPFC0 * Step for EPFC0
E-STOP relay, safety gate monitor
Unit features Safety features Gertebild ][Bildunterschrift Safety relay for monitoring E-STOP pushbuttons and safety gates. Approvals Gertemerkmale Positive-guided relay outputs: 7 safety contacts (N/O),
20 General technical data XI/ON
20 General technical data XI/ON General technical information General technical data XI/ON Potential isolation Ambient temperature Operating temperature Storage temperature Relative humidity Noxious gas
Max. Input Power (W) Input Current. (A pk/50%-µs) Dimming Method. 1-10V Isolated DALI
Output Power (W) Output Voltage (V) Output Current (A) Efficiency@ Max Load Max Case Temp. ( C) 75 80 ~ 152 0.350 0.70 > 92% 80 C 1 2 0 Input Current 2 0 0 2 4 0 Max. Input Power (W) 2 7 7 85 Inrush Current
Typical Efficiency (2) 350 ma 90 ~ 305 Vac 57~114Vdc 160 W 92.0% EUC-160Q035DT(ST) (3 ) Parameter Min. Typ. Max. Notes
EUC160QxxxDT(ST) 160W Fourchannel Constant Current IP67 Driver Features Ultra High Efficiency (Up to 92%) Four Channels Output Active Power Factor Correction (0.99 Typical) Constant Current Output Input
IDC Assembly (depends on cable) -55/125 C. IDC Assembly (depends on cable) By ambient temperature: 20 C 1,2 A 70 C 0,9 A 100 C 0,6 A
mm Connectors Surface Mount Technology, Solderless Pressfit, IDC Electrical And Mechanical Characteristics Number of Pins Technical data Climate Category Bearing and operating temperature area Current
RE17LAMW on-delay timing relay - 1 s..100 h V AC/DC - solid state output
Characteristics on-delay timing relay - 1 s..100 h - 24..240 V AC/DC - solid state output Complementary Control type Voltage range Main Range of product Product or component type Discrete output type Width
Motor Controllers AC Semiconductor Motor Controller Type RSHR MIDI
otor Controllers AC Semiconductor otor Controller Type RSHR IDI Soft starting and stopping of 3-phase induction squirrel cage motors 2-phase control with integral bypassing of semiconductors Low inrush
ABL1REM24025 regulated SMPS - single phase V input - 24 V output - 60 W
Characteristics regulated SMPS - single phase - 100..240 V input - 24 V output - 60 W Main Range of product Product or component type Power supply type Rated power in W Input voltage Output voltage Power
E-STOP relays, safety gate monitors
Unit features Safety gates Gertebild ][Bildunterschrift_NOT_Sch.tuer_Licht Safety relay for monitoring E-STOP pushbuttons, safety gates and light beam devices Approvals Gertemerkmale Positive-guided relay
RM4JA01F current measurement relay RM4-J - range ma V AC
Characteristics current measurement relay RM4-J - range 3..1000 ma - 110..130 V AC Main Range of product Product or component type Relay type Relay name Relay monitored parameters Power consumption in
RE22R2KMR Off-delay Timing Relay s 10min V AC/DC - 2C/O
Characteristics Off-delay Timing Relay - 0.05s 10min - 24 240V AC/DC - 2C/O Main Range of product Product or component type Discrete output type Device short name Nominal output current Complementary Contacts
RE22R2QGMR Star-Delta Timing Relay s 300h V AC/DC - 2C/O
Characteristics Star-Delta Timing Relay - 0.05s 300h - 24 240V AC/DC - 2C/O Main Range of product Product or component type Discrete output type Device short name Nominal output current Complementary Contacts
MODEL: 43AL1. Digital Panel Meters 43 Series
Digital Panel Meters 43 Series LOOP POWERED DIGITAL PANEL METER (process meter) Functions & Features Loop powered -1999 to 9999 compact digital meter Scaling function Screwless spring terminal 24 (.94)
Max. Output Power. Typical Efficiency (1) 350 ma 90 ~ 305 Vac 107~214Vdc 75 W 92% EUC-075S035DT(3)
EUC075SxxxDT Features High Efficiency (Up to 92%) Active Power Factor Correction (0.99 Typical) Constant Current Output Dimming Function Lightning Protection AllRound Protection: OVP, SCP, OTP Waterproof
Motor Controllers AC Semiconductor Motor Controller Type RSHR MIDI
otor Controllers AC Semiconductor otor Controller Type RSHR IDI Soft starting and stopping of 3-phase induction squirrel cage motors 2-phase control with integral bypassing of semiconductors Low inrush
VEL05 Series. xxx Series. 5 Watt. AC-DC Power Supplies. Models & Ratings. Input
5 Watt xxx Series Energy Efficiency Level VI Barrel Jack & USB Versions Fixed Mains Connectors Universal Input Output Voltages from 5.0 V to 12.0 V Class II Construction Low Cost B R A N D The VEL05 series
Output Voltage in Constant Voltage Mode. Model Number
Supplies LDB75 Supply Constant Voltage /Current LDB Series FEATURES Universal Input: 90-305VAC Constant Voltage/Current High Efficiency 91% Class II IP67 rated Class 2 device (UL1310) Power Factor: Typical
ABL8RPS24100 regulated SMPS - 1 or 2-phase V - 24 V - 10 A
Product datasheet Characteristics ABL8RPS24100 regulated SMPS - 1 or 2-phase - 100..500 V - 24 V - 10 A Complementary Input voltage limits Network frequency Inrush current Cos phi Main Range of product
ABL8REM24050 regulated SMPS - 1 or 2-phase V AC - 24 V - 5 A
Characteristics regulated SMPS - 1 or 2-phase - 100..240 V AC - 24 V - 5 A Main Range of product Product or component type Power supply type Input voltage Output voltage Rated power in W Input protection
EV7 is a range of temperature controllers, timers and pulse counters.
EV7 Step controllers, timers and pulse counters Controllori a gradini, timer e contaimpulsi EV7 is a range of temperature controllers, timers and pulse counters. They are available in compact version,
HEC-100RTN-48QSCA Rev A1.0
HEC100RTN48QSCA Rev A1.0 A. Features High Efficiency (Up to 90%). Active Power Factor Correction (Typical 0.96). Isolation Class I (With FG) AllRound Protection: OVP/SCP/OTP/OPP. Fully isolated Metal case
NEW Series SSH Output to 75A, 510 Vac with Diagnostics High Industrial Performance (HIPpak) Solid-State Relays
FEATURES/BENEFITS Zero-cross models with system diagnostics Very low zero-cross turn-on voltage Input and output protection and control LED standard IP20 protection by flaps on terminals With double removable
C18 series. features. web contents. available models C18. M18 cylindrical capacitive sensors. M18 cylindrical C18 P B A C
C8 series M8 cylindrical capacitive sensors warranty features warranty DC or AC supply voltage High noise immunity Shielded and unshielded models Adjustable sensitivity Plastic housing web contents M8
ABL4RSM24050 regulated SMPS - 1 or 2 phase V AC - 24 V - 5A
Characteristics regulated SMPS - 1 or 2 phase - 120..230 V AC - 24 V - 5A Complementary Input voltage limits Network frequency Inrush current Main Range of product Product or component type Power supply
Switching Power Supply S82J. Ordering Information. Open-Frame, Covered-Frame, or Enclosed-Frame Type with Capacity Up to 600 W
Switching Power Supply Open-Frame, Covered-Frame, or Enclosed-Frame Type with Capacity Up to 600 W Models range from 10 to 600 W UL 508 approval on 100-W 150-W, 300-W, and 600-W models Wide range of output
Output Voltage Range. Parameter Min. Typ. Max. Notes. Leakage Current ma IEC ; 240Vac/ 60Hz
LMT080SxxxSTF Features 80W Nonisolated IP20 Driver Ultra High Efficiency (Up to 94.0%) Adjustable Output Current (AOC) with External Resistor Full Power at Wide Output Current Range (Constant Power) Flicker
Single contact blocks
Single contact blocks Selection diagram CONTACT BLOCKS 10G 01G 10L 01K 1NO leading slow slow 1NO slow lagging slow CONNECTIONS silver contacts (standard) G silver contacts gold plated FIXING V clamping
Push-Pull and E-Stop Switches. Datasheet
Push-Pull and E-Stop Switches Datasheet Honeywell Push-pull and E-stop switches are durable, environmentally sealed, sliding contact switches incorporating two circuits with multiple combinations. The
SIPLUS S7-200 PS 203. Overview
SIPLUS S7-200 PS 203 Overview Design and functionality of the power supply are optimally adapted to the SIPLUS S7-200 micro PLC Slim design Particularly suitable for low cabinet depths Note: SIPLUS extreme
CIR-e 3. Portable power analyzer. Portable power analyzer M8-27. Features. Description. Application
CIR-e 3 Portable power analyzer Features Measure in 2 quadrants the main parameters for single-phase and three-phase electrical networks with 3 and 4 wires. True root mean square measure Energy meter.
Energy Management Modular DC Energy analyzer Type VMU-E and VMU-X
Energy Management Modular DC Energy analyzer Type VMU-E and VMU-X Modular solution based on the combination of two units: VMU-E analysis unit and VMU-X universal power supply and RS485 communication unit.
RM4JA32MW current measurement relay RM4-J - range A V AC DC
Characteristics current measurement relay RM4-J - range 0.3..15 A - 24..240 V AC DC Main Range of product Product or component type Relay type Relay name Relay monitored parameters Power consumption in
RE22R2CMR Off-delay Timing Relay s 300h V AC/DC - 2C/O
Characteristics Off-delay Timing Relay - 0.05s 300h - 24 240V AC/DC - 2C/O Main Range of product Product or component type Discrete output type Device short name Nominal output current Complementary Contacts
RE22R2AMR On-delay Timing Relay s 300h V AC/DC - 2C/O
Characteristics On-delay Timing Relay - 0.05s 300h - 24 240V AC/DC - 2C/O Main Range of product Product or component type Discrete output type Device short name Nominal output current Complementary Contacts
02/11/2015
DIN Rail Mount 35 mm HSV Part number 84874320 Control of overspeed, underspeed, operating rate, stopping Measurement via discrete sensors - 3-wire PNP or NPN, Namur, voltage 0-30V or volt-free contact
SAFETY RELAY AD SR0 INSTALLATION USE AND MAINTENANCE
SAFETY RELAY AD SR0 INSTALLATION USE AND MAINTENANCE This symbol indicates an important personal safety warning. Failure to comply with the warning may result in very high risk for exposed personnel. INTRODUCTION
E-STOP relays, safety gate monitors
Unit features Positive-guided relay outputs: 2 safety contacts (/O), instantaneous Connection options for: E-STOP pushbutton Reset button LED indicator for: Switch status channel 1/2 Supply voltage See
V3 series Inductive sensors with AC/DC supply voltage
series warranty features warranty Complete range of AC/DC inductive sensors Protected against short circuits in all working conditions NO/NC selection with DC supply voltage web contents Application notes
ABL8BBU24400 battery control module V DC - 24 V - 40 A - for regulated SMPS
Characteristics battery control module - 24..28.8 V DC - 24 V - 40 A - for regulated SMPS Main Range of product Product or component type Input voltage Output voltage Maximum output current Complementary
NI REM Remote I/O Overview DATASHEET. Digital Input Module for Remote I/O
DATASHEET NI REM-11154 Digital Input Module for Remote I/O Read digital input frequencies up to 5 khz Adjustable filter time to improve measurement quality Spring-terminal connectors allow fast wiring
PK Series: Monovolt. VERO + Danica
PK Series: Monovolt VDE and UL* approved primary switched mode power supplies with front or rear heat sinks for use in 19" subracks to DIN41494, single input and 30 to 240 Watt output. Features Compact,
Section 4 Ground-Fault Protection Devices
Multi 9 System Catalog Section 4Ground-Fault Protection Devices Section 4Ground-Fault Protection Devices Selection Table The Multi 9 System includes one UL Listed and three IEC rated product families that
Connection to LED driver Connection to DALI bus P/N (1) UL Wire(black/white, purple, gray) UL Wire(pink, gray) SDD-ADFN1
Features Convert DALI signal to 0-10V dimming signal Comply with DALI protocol DALI slave Waterproof (IP66) Description The DALI controller can convert DALI command to control the LED lamp s current via
QUINT-PS/24DC/48DC/ 5
Extract from the online catalog QUINT-PS/24DC/48DC/ 5 Order No.: 2320128 QUINT DC/DC converter, primary-switched, input: 24 V DC, output: 48 V DC/5 A Commercial data GTIN (EAN) sales group Pack Catalog
Series AMEPR60C-AZ up to 5A AC-DC / DC-DC LED Driver / Converter
Click on Series name for product info on aimtec.com Series AMEPRC-AZ Models Single output Model Max Output Power (W) 1 FEATURES: Output Voltage Range (V) 3 Output Current 3 AMEPRC-120AZ 36-0 - 1.20 AMEPRC-361AZ
Constant Voltage Mode
FEATURES: AC Input 1~277VAC Built-in Active PFC Function Protection: SCP / OVP / OTP Flicker Free High Operating Ambient Temp.: -3 ~+6 Surge protection: L-N 4KV, L-FG/N-FG 8KV Safety: UL 875 / PSE EMI:
Positive-guided relay outputs: 3 safety contacts (N/O), instantaneous. 1 auxiliary contact (N/C), instantaneous
Safety relay for monitoring E-STOP pushbuttons. Approvals Unit features Positive-guided relay outputs: 3 safety contacts (N/O), instantaneous 1 auxiliary contact (N/C), instantaneous Safe separation of
E-STOP relay, safety gate monitor
Safety relay for monitoring E-STOP pushbuttons, safety gates and light barriers. Approvals Unit features Positive-guided relay outputs: 2 safety contacts (N/O), instantaneous 1 semiconductor output Connection
VEL05 Series. xxx Series. 5 Watt. AC-DC Power Supplies. Models & Ratings. Input
5 Watt xxx Series Energy Efficiency Level VI Barrel Jack & USB Versions Fixed Mains Connectors Universal Input Output Voltages from 5.0 V to 12.0 V Class II Construction Low Cost BRAND The VEL05 series
CATALOGUE ELECTRIC CHAIN ACTUATORS AND WINDOW AUTOMATION
CATALOGUE ELECTRIC CHAIN ACTUATORS AND WINDOW AUTOMATION COMPANY PROFILE FENESTRATION SOLUTIONS AUSTRALIA IS THE LEADING SUPPLIER OF SOLUTIONS AND SYSTEMS TO WINDOW AND DOOR MANUFACTURERS THROUGHOUT AUSTRALIA.
ABL8RPS24030 regulated SMPS - 1 or 2-phase V - 24 V - 3 A
Characteristics regulated SMPS - 1 or 2-phase - 100..500 V - 24 V - 3 A Product availability : Stock - Normally stocked in distribution facility Price* : 270.00 USD Main Range of product Product or component
Safety relay emergency stop/protective door, 24VDC/AC, 4 enabling paths
DATASHEET - ESR5-NO-41-24VAC-DC Safety relay emergency stop/protective door, 24VDC/AC, 4 enabling paths Part no. ESR5-NO-41-24VAC-DC Catalog No. 118701 EL-Nummer (Norway) 0004133317 Delivery program Product