Product Guide. Industrial Data Communications

Transcription

1 Product Guide Industrial Data Communications

2 35 years at the leading edge of industrial data communications Produced by: Westermo Teleindustri AB Photo: IStockphoto, BildN, Västerås, Sweden Illustrations: Visual Information Sweden AB Eskilstuna, Sweden Specifications are subject to change without notice due to continuous product development and improvement. Westermo provides a full range of data communications solutions for demanding applications in the transport, water and energy markets among others. For the past 35 years, we have been at the forefront of technological development and often pushed the limits of what is technically possible. The staff at Westermo offers the highest possible service to help customers to select, configure and install the best solution for their specific needs. Our knowledge goes far beyond our own product range, regardless of whether the installation is in a substation, water treatment plant or alongside a railway. In order to provide the best possible support, we have local presence in more than 35 countries through our authorized distributors and own offices. Since 2008 Westermo has been part of the Beijer Electronics Group, a company with unique knowledge of the HMI and industrial automation business. 2

3 A product range to meet every requirement Westermo provides a full range of data communication solutions for demanding applications such as railways, aviation, defence, water treatment, substation automation, roads and tunnels. The staff at Westermo can provide the highest levels of service and technical support to help our customers choose, configure and install the best solution for each specific application requirement. Our knowledge goes far beyond our own product range; we have a unique competence regarding your environment whether it is on a train, in an aeroplane, on the seabed or in a substation. To ensure a close relationship with the customer, Westermo has a local presence in more than 35 countries. A selection of our most popular products are represented in this catalogue, but the Westermo product line includes more than a thousand different types and versions of our modems, switches, routers and converters. Quality Westermo strives for the highest quality. To this end, we will endevour to supply products, goods and services in a courteous fashion that reflects our commitment to the Quality Policy as summarized below, therefore, we will; Understand our customer s requirements and needs as well as relevant regulations, so as to develop, manufacture and offer the right products. Give our customers excellent support throughout the entire business process. Keep up our never ending commitment for even better quality and effectiveness. This gives and will continue to give us stability, long term growth and profitability. Technical support Westermo has always believed in providing the best technical service possible to help you, our customer, get your systems operational. All our subsidiaries employ significant technical support departments that allow us to give free of charge telephone technical support in a number of languages during normal office hours. We also commit many hours to working with other product vendors to produce product application notes that can be downloaded from the web at anytime. For more information about products and services from Westermo, please visit our website at Contents Ethernet Switches 4 14 WeOS Westermo Operating System 15 Ethernet Extenders Routers Modems Converters Wireless Housings Accessories Approvals

4 Ethernet Switches Managed Switches Unmanaged Switches Managed PoE Ethernet Switch Unmanaged PoE Ethernet Switch The Westermo range of industrial Ethernet switches are designed for use in harsh environments and allow you to build cost-effective, reliable, secure networks. Whether you require an unmanaged switch for a point to point link, a managed switch to for redundancy or a layer 3 switch for network routing, our extensive knowledge of the various standards used in railway, defence, water treatment, substation automation and road applications means we have the ideal solution, regardless of the environment. 4

5 Switches that can withstand all industrial environments 5

6 Managed Ethernet Switches WeOS L105-S L205-S L106-S L206-S L108-F2G-S Managed Device Server Switch 4 x 10/100 Mbit/s, Ethernet TX, RJ x Digital I/O. 1 x RS-232, RJ x 2.5 mm jack, console. Operating voltage: 19 to 60 VDC. Managed Device Server Switch with Routing Functionality 4 x 10/100 Mbit/s, Ethernet TX, RJ x Digital I/O. 1 x RS-232, RJ x 2.5 mm jack, console. Operating voltage: 19 to 60 VDC. Managed Device Server Switch 4 x 10/100 Mbit/s, Ethernet TX, RJ x Digital I/O. 1 x RS-232, RJ x RS-232/422/485, RJ x 2.5 mm jack, console. Operating voltage: 19 to 60 VDC. Managed Device Server Switch with Routing Functionality 4 x 10/100 Mbit/s, Ethernet TX, RJ x Digital I/O. 1 x RS-232, RJ x RS-232/422/485, RJ x 2.5 mm jack, console. Operating voltage: 19 to 60 VDC. Managed Device Server Switch 4 x 10/100 Mbit/s, Ethernet TX, RJ x 100/1000 Mbit/s, pluggable connections transceivers supported, Ethernet FX or TX, SFP. 1 x Digital I/O. 1 x RS-232, RJ x RS-232/422/485, RJ x 2.5 mm jack, console. Operating voltage: 19 to 60 VDC. 6 Ethernet Switches

7 WeOS L208-F2G-S L106-F2G L110-F2G L106-F2G L210-F2G L206-F2G Managed Device Server Switch with Routing Functionality 4 x 10/100 Mbit/s, Ethernet TX, RJ x 100/1000 Mbit/s, pluggable connections transceivers supported, Ethernet FX or TX, SFP. 1 x Digital I/O. 1 x RS-232, RJ x RS-232/422/485, RJ x 2.5 mm jack, console. Operating voltage: 19 to 60 VDC. Managed Ethernet Switch 4 x 10/100 Mbit/s, Ethernet TX, RJ x 100/1000 Mbit/s, pluggable connections transceivers supported, Ethernet FX or TX, SFP. 1 x Digital I/O. 1 x 2.5 mm jack, console. Operating voltage: 19 to 60 VDC. Managed Ethernet Switch 8 x 10/100 Mbit/s, Ethernet TX, RJ x 100/1000 Mbit/s, pluggable connections transceivers supported, Ethernet FX or TX, SFP. 1 x Digital I/O. 1 x 2.5 mm jack, console. Operating voltage: 19 to 60 VDC. Managed Ethernet Switch 4 x 10/100 Mbit/s, Ethernet TX, RJ x 100/1000 Mbit/s, pluggable connections transceivers supported, Ethernet FX or TX, SFP. 1 x Digital I/O. 1 x 2.5 mm jack, console. Operating voltage: 19 to 60 VDC. Managed Ethernet Switch with Routing Functionality 8 x 10/100 Mbit/s, Ethernet TX, RJ-45 2 x 100/1000 Mbit/s, pluggable connections transceivers supported. Ethernet FX or TX, SFP. 1 x Digital I/O. 1 x 2.5 mm jack, console. Operating voltage: 19 to 60 VDC. Managed Ethernet Switch with Routing Functionality 4 x 10/100 Mbit/s, Ethernet TX, RJ x 100/1000 Mbit/s, pluggable connections transceivers supported, Ethernet FX or TX, SFP. 1 x Digital I/O. 1 x 2.5 mm jack, console. Operating voltage: 19 to 60 VDC. Ethernet Switches 7

8 WeOS RFI-6-F4G RFI RFI-10-F4G- T4G RFI-10-F RFI-14-F4G RFI-14-F4G- F Industrial Routing Switch 2 x 10/100 Mbit/s, Ethernet TX, RJ x 100/1000 Mbit/s, pluggable connections transceivers supported, Ethernet FX or TX (TX support 10/100/1000 Mbit/s, copper transceiver), SFP. 1 x Digital I/O. 1 x 2.5 mm jack, console. Operating voltage: 16 to 60 VDC. Industrial Routing Switch 10 x 10/100 Mbit/s, Ethernet TX, RJ x Digital I/O. 1 x 2.5 mm jack, console. Operating voltage: 16 to 60 VDC. Operating temperature: 40 to +70 C ( 40 to +158 F) Industrial Routing Switch 2 x 10/100 Mbit/s, Ethernet TX, RJ x 10/100/1000 Mbit/s, Gigabit Ethernet TX, RJ x 100/1000 Mbit/s, pluggable connections transceivers supported, Ethernet FX or TX (TX support 10/100/1000 Mbit/s, copper transceiver), SFP. 1 x Digital I/O. 1 x 2.5 mm jack, console. Operating voltage: 16 to 60 VDC. Industrial Routing Switch 2 x 10/100 Mbit/s, Ethernet TX, RJ x 100 Mbit/s, pluggable connections transceivers supported, Ethernet FX or TX (TX support 10/100 Mbit/s, copper transceiver), SFP. 1 x Digital I/O. 1 x 2.5 mm jack, console. Operating voltage: 16 to 60 VDC. Industrial Routing Switch 10 x 10/100 Mbit/s, Ethernet TX, RJ x 100/1000 Mbit/s, pluggable connections transceivers supported, Ethernet FX or TX (TX support 10/100/1000 Mbit/s, copper transceiver), SFP. 1 x Digital I/O. 1 x 2.5 mm jack, console. Operating voltage: 16 to 60 VDC. Industrial Routing Switch 2 x 10/100 Mbit/s, Ethernet TX, RJ x 100/1000 Mbit/s, pluggable connections transceivers supported, Ethernet FX or TX (TX support 10/100/1000 Mbit/s, copper transceiver), SFP. 8 x 100 Mbit/s, pluggable connections transceivers supported, Ethernet FX or TX (TX support 10/100 Mbit/s, copper transceiver), SFP. 1 x Digital I/O. 1 x 2.5 mm jack, console. Operating voltage: 16 to 60 VDC. 8 Ethernet Switches

9 WeOS RFI RFI-18- F4G-T4G RFI-18-F RFI-18-F4G- T4G-F RFI-18-F Industrial Routing Switch 18 x 10/100 Mbit/s, Ethernet TX, RJ x Digital I/O. 1 x 2.5 mm jack, console. Operating voltage: 16 to 60 VDC. Industrial Routing Switch 10 x 10/100 Mbit/s, Ethernet TX, RJ x 10/100/1000 Mbit/s, Gigabit Ethernet TX, RJ-45 4 x 100/1000 Mbit/s, pluggable connections transceivers supported, Ethernet FX or TX (TX support 10/100/1000 Mbit/s, copper transceiver), SFP. 1 x Digital I/O. 1 x 2.5 mm jack, console. Operating voltage: 16 to 60 VDC. Industrial Routing Switch 2 x 10/100 Mbit/s, Ethernet TX, RJ x 100 Mbit/s, pluggable connections transceivers supported, Ethernet FX or TX (TX support 10/100 Mbit/s, copper transceiver), SFP. 1 x Digital I/O. 1 x 2.5 mm jack, console. Operating voltage: 16 to 60 VDC. Industrial Routing Switch 2 x 10/100 Mbit/s, Ethernet TX, RJ x 10/100/1000 Mbit/s, Gigabit Ethernet TX, RJ x 100/1000 Mbit/s, pluggable connections transceivers supported, Ethernet FX or TX (TX support 10/100/1000 Mbit/s, copper transceiver), SFP. 8 x 100 Mbit/s, pluggable connections transceivers supported, Ethernet FX or TX (TX support 10/100 Mbit/s, copper transceiver), SFP. 1 x Digital I/O. 1 x 2.5 mm jack, console. Operating voltage: 16 to 60 VDC. Industrial Routing Switch 10 x 10/100 Mbit/s, Ethernet TX, RJ x 100 Mbit/s, pluggable connections transceivers supported, Ethernet FX or TX (TX support 10/100 Mbit/s, copper transceiver), SFP. 1 x Digital I/O. 1 x 2.5 mm jack, console. Operating voltage: 16 to 60 VDC. Ethernet Switches 9

10 WeOS RFR-12-FB EN50155 Backbone Routing Switch 12 x 10/100 Mbit/s, Ethernet TX, M12. Dual by-pass relays. 1 x M12 USB configuration plug. Operating voltage: 16.8 to 143 VDC. Viper EN50155 M12 Switch 8 x 10/100 Mbit/s, Ethernet TX, M12. Operating voltage: 16.8 to 143 VDC. WeOS Viper Viper Viper-112- T3G Viper-212- T3G EN50155 Switch 12 x M12, 10/100 Mbit/s, Ethernet TX. 1 x Console port, RS-232. Operating voltage: 16.8 to 143 VDC. EN Routing Switch 12 x 10/100 Mbit/s, Ethernet TX, M12. 1 x Console port, RS-232. Operating voltage: 16.8 to 143 VDC. EN GigE Switch 9 x 10/100 Mbit/s, Ethernet TX, M12. 3 x 10/100/1000 Mbit/s, Ethernet TX, M12. 1 x Console port, RS-232. Operating voltage: 16.8 to 143 VDC. EN GigE Routing Switch 9 x 10/100 Mbit/s, Ethernet TX, M12. 3 x 10/100/1000 Mbit/s, Ethernet TX, M12. 1 x Console port, RS-232. Operating voltage: 16.8 to 143 VDC. 10 Ethernet Switches

11 . MDI-110-F Fast Ethernet Switch 7 x 10/100 Mbit/s, Ethernet TX, RJ x 10/100 Mbit/s, Ethernet TX or 100 Mbit/s, Ethernet FX, SFP combo ports. Operating voltage: 10 to 60 VDC Operating temperature: 25 to 70ºC ( 13 to +158 F). MDI-110- F3G MDI-112- F4G MDI-118- F2G MRI-128- F4G MRI-128- F4G/DC Unmanaged Ethernet Switches Gigabit Ethernet Switch 7 x 10/100 Mbit/s, Ethernet TX, RJ x 10/100/1000 Mbit/s, Ethernet TX or 100/1000 Mbit/s, Ethernet FX, SFP combo ports. Operating voltage: 10 to 60 VDC Operating temperature: 25 to 70ºC ( 13 to +158 F). Gigabit Ethernet Switch 8 x 10/100 Mbit/s, Ethernet TX, RJ x 10/100/1000 Mbit/s, Ethernet TX or 1000 Mbit/s, Ethernet FX, SFP combo ports. 2 x 1000 Mbit/s, Ethernet FX, SFP. Operating voltage: 10 to 60 VDC. Operating temperature: 25 to 70ºC ( 13 to +158 F). Gigabit Ethernet Switch 16 x 10/100 Mbit/s, Ethernet TX, RJ x 10/100/1000 Mbit/s, Ethernet TX or 1000 Mbit/s, Ethernet FX, SFP combo ports. Operating voltage: 10 to 60 VDC Operating temperature: 25 to 70ºC ( 13 to +158 F). Gigabit Rack-mount Switch 24 x 10/100 Mbit/s, Ethernet TX, RJ x 10/100/1000 Mbit/s, Ethernet TX or 1000 Mbit/s, Ethernet FX, SFP combo ports. Operating voltage: VAC. Operating temperature: 25 to 70ºC ( 13 to +158 F). Gigabit Rack-mount Switch 24 x 10/100 Mbit/s, Ethernet TX, RJ x 10/100/1000 Mbit/s, Ethernet TX or 1000 Mbit/s, Ethernet FX, SFP combo ports. Operating voltage: 12 to 48 VDC. Operating temperature: 25 to 70ºC ( 13 to +158 F). SDW-500- series 3644-xxxx SDW-500 EX-series 3644-xxxx Industrial Ethernet 5-port Switch SDW x 10/100 Mbit/s, Ethernet TX, RJ x 100 Mbit/s, Ethernet FX, LC, SC or ST connector. SDW x 10/100 Mbit/s, Ethernet TX, RJ x 100 Mbit/s, Ethernet FX, LC, SC or ST connector. SDW x 10/100 Mbit/s, Ethernet TX, RJ-45. Operating voltage: 9.6 to 57.6 VDC. Operating temperature: 25 to +70ºC ( 13 to +158 F). Ethernet Switches 11

12 Viper Viper EN50155 M12 Switch 8 x 10/100 Mbit/s, Ethernet TX, M12. Operating voltage: 16.8 to 143 VDC. Operating temperature: 40 to +70ºC ( 40 to +158 F). EN50155 Switch 12 x 10/100 Mbit/s, Ethernet TX, M12. 1 x Service ports that must not be used. Operating voltage: 16.8 to 143 VDC. Operating temperature: 40 to +70ºC ( 40 to +158 F).. SDI-541- MM-SC SDI-541- SM-SC SDI SDI-862- MM-SC SDI-862 -SM-SC SDI port Ethernet Fibre Switch 4 x 10/100 Mbit/s, Ethernet TX, RJ x 100 Mbit/s, Ethernet FX, Multi-mode 2 km, SC connector. 1 x Power/Relay, 4-pin terminal block. Operating voltage: 18 to 32 VDC or 18 to 27 VAC. Operating temperature: 10 to +60ºC (14 to +140 F). 4-port Ethernet Fibre Switch 4 x 10/100 Mbit/s, Ethernet TX, RJ x 100 Mbit/s, Ethernet FX, Single-mode 30 km, SC connector. 1 x Power/Relay, 4-pin terminal block. Operating voltage: 18 to 32 VDC or 18 to 27 VAC. Operating temperature: 10 to +60ºC (14 to +140 F). 5-port Ethernet Switch 5 x 10/100 Mbit/s, Ethernet TX, RJ x Power/Relay, 4-pin terminal block. Operating voltage: 18 to 32 VDC or 18 to 27 VAC. Operating temperature: 20 to +70ºC ( 4 to +158 F). 8-port Ethernet Fibre Switch 6 x 10/100 Mbit/s, Ethernet TX, RJ x 100 Mbit/s, Ethernet FX, Multi-mode 2 km, SC connector. 1 x Alarm relay, Terminal block connector with 1 DC 24 V carry ability. Operating voltage: 10 to 48 VDC. Operating temperature: 25 to +70ºC ( 13 to +158 F). 8-port Ethernet Fibre Switch 6 x 10/100 Mbit/s, Ethernet TX, RJ x 100 Mbit/s, Ethernet FX, Single-mode 30 km, SC connector. 1 x Alarm relay, Terminal block connector with 1 DC 24 V carry ability. Operating voltage: 10 to 48 VDC. Operating temperature: 25 to +70ºC ( 13 to +158 F). 8-port Ethernet Switch 8 x 10/100 Mbit/s, Ethernet TX, RJ x Alarm relay, Terminal block connector with 1 DC 24 V carry ability. Operating voltage: 10 to 48 VDC. Operating temperature: 34 to +70ºC ( 29 to +158 F). 12

13 Managed PoE Ethernet Switches WeOS Viper-112-P Viper-212-P Viper-112- T3G-P Viper-212- T3G-P EN PoE Switch 12 x 10/100 Mbit/s, Ethernet TX, M12 (8 with PoE capability). 1 x Console port, RS-232. Operating voltage: 33.6 to 143 VDC. EN PoE Routing Switch 12 x 10/100 Mbit/s, Ethernet TX, M12 (8 with PoE capability). 1 x Console port, RS-232. Operating voltage: 33.6 to 143 VDC. EN PoE GigE Switch 9 x 10/100 Mbit/s, Ethernet TX, M12 (8 with PoE capability). 3 x 10/100/1000 Mbit/s, Ethernet TX, M12. 1 x Console port, RS-232. Operating voltage: 33.6 to 143 VDC. EN PoE GigE Routing Switch 9 x 10/100 Mbit/s, Ethernet TX, M12 (8 with PoE capability). 3 x 10/100/1000 Mbit/s, Ethernet TX, M12. 1 x Console port, RS-232. Operating voltage: 33.6 to 143 VDC.. MRI-128- F4G-PSE MRI-128- F4G-PSE MRI-120- F4G-PSE Rackmount PoE Switch 24 x 10/100 Mbit/s Ethernet TX, PoE. 4 x 1000 Mbit/s, RJ-45/SFP combo. Operating voltage: 46 to 57 VDC or 90 to 264 VAC. Operating temperature: 25 to +65 C ( 13 to +149 F). Rackmount PoE Switch 16 x 10/100 Mbit/s Ethernet TX, PoE. 4 x 1000 Mbit/s, RJ-45/SFP combo. 8 x 10/100 Mbit/s, Ethernet TX. Operating voltage: 46 to 57 VDC or 90 to 264 VAC. Operating temperature: 25 to +65 C ( 13 to +149 F). Rackmount PoE Switch 8 x 10/100 Mbit/s Ethernet TX, PoE. 4 x 1000 Mbit/s, RJ-45/SFP combo. 8 x 10/100 Mbit/s, Ethernet TX. Operating voltage: 46 to 57 VDC or 90 to 264 VAC. Operating temperature: 25 to +65 C ( 13 to +149 F). 13

14 Unmanaged PoE Ethernet Switches. PSI-660G PSI-1010G- 24V PSI-1010G- 48V PSI F2G-48V PoE booster Switch 4 x 10/100 Mbit/s Ethernet TX, RJ-45, PoE. 2 x 10/100/1000 Mbit/s, Ethernet TX, RJ-45. Operating voltage: 12 to 24 VDC. Operating temperature: 25 to +70 C ( 13 to +158 F). PoE booster Switch 8 x 10/100 Mbit/s Ethernet TX, RJ-45, PoE. 2 x 10/100/1000 Mbit/s, Ethernet TX, RJ-45. Operating voltage: 12 to 24 VDC. Operating temperature: 25 to +70 C ( 13 to +158 F). PoE Switch 8 x 10/100 Mbit/s Ethernet TX, RJ-45, PoE. 2 x 10/100/1000 Mbit/s, Ethernet TX, RJ-45. Operating voltage: 46 to 57 VDC. Operating temperature: 25 to +70 C ( 13 to +158 F). PoE Switch 8 x 10/100 Mbit/s Ethernet TX, RJ-45, PoE. 2 x SFP Gigabit fibre. Operating voltage: 46 to 57 VDC. Operating temperature: 25 to +70 C ( 13 to +158 F). 14

15 Westermo Delivers Robust Industrial Networks The traditional Westermo values of robustness and reliability in hardware design are now complemented by the WeOS network software solution. Over the last few years, Westermo has worked to develop this market leading software solution that operates on a range of Westermo s most robust hardware platforms. Robustness Westermo hardware is designed and externally verified to work in the harshest industrial environments over a long service life. Cyber Security With virtually every network today somehow connected to the Internet, WeOS can deliver firewall functionality to every port on the network. Resilience Westermo networks are mission critical and designed to operate even when there are media or power failures on parts of the system. Multimedia Support Fibre, UTP, RS-232, RS-485, VDSL2, ADSL and any twisted pair cable are all supported within the WeOS family of products. Network Application Support Industrial protocols come in many different formats; however, Westermo s expertise and WeOS legacy serial support allows simple migration to IP technology. Production Quality All WeOS products are manufactured at our own facility in Sweden to the highest quality standards. WeOS Visit our website for more information

16 Ethernet Extenders Point-to-point Managed network The Westermo Wolverine series of industrial Ethernet extenders allow cost-effective Ethernet networks to be created over long distances, at high data rates. The SHDSL technology employed makes it possible to reuse many types of pre-existing cabling which in turn can lead to considerable financial savings. With support for multidrop networks, redundant rings, legacy serial connections and layer 3 routing functions, our range of Ethernet extenders can meet any demand your application requires. 16

17 Extend your network far beyond the normal limits of Ethernet 17

18 Point-to-Point Ethernet Extenders DDW DDW-120 EX Ethernet SHDSL Extender 1 x 10/100 Mbit/s, Ethernet TX, RJ x 192 kbit/s to 15.3 Mbit/s, DSL, 2 position detachable scerw terminal. 1 x kbit/s, Diagnostic port, 2.5 mm jack. Operating voltage: 9.6 to 57.6 VDC. Operating temperature: 40 to +70ºC ( 40 to +158 F). Managed Network Ethernet Extenders DDW DDW Industrial Ethernet Extender 4 x 10/100 Mbit/s, Ethernet TX, RJ x 192 kbit/s to 5.7 Mbit/s, DSL, 2-position detachable screw terminal. Operating voltage: 16 to 60 VDC. Operating temperature: 40 to +70ºC ( 40 to +158 F). Ethernet extender with serial support 4 x 10/100 Mbit/s, Ethernet TX, RJ x 300 bit/s to kbit/s, RS-232, 9-pin D-sub (male). 2 x 192 kbit/s to 5.7 Mbit/s, DSL, 2-position detachable screw terminal. Operating voltage: 16 to 60 VDC. Operating temperature: 40 to +70ºC ( 40 to +158 F). 18 Ethernet Extenders

19 WeOS DDW DDW DDW Industrial Ethernet Extender 2 x 10/100 Mbit/s, Ethernet TX, RJ x 32 kbit/s to 15.3 Mbit/s (30.4 with bonding), SHDSL, 2-position detachable screw terminal. 1 x 300 bit/s to kbit/s, RS-232, RJ x Digital I/O, 4-position detachable screw terminal. 1 x 2.5 mm jack, Console. Operating voltage: 19 to 60 VDC. Operating temperature: 40 to +70ºC ( 40 to +158 F). Redundant Ring Ethernet Extender 4 x 10/100 Mbit/s, Ethernet TX, RJ x 32 kbit/s to 15.3 Mbit/s, SHDSL, 2-position detachable screw terminal. 1 x Digital I/O, 4-position detachable screw terminal. 1 x 2.5 mm jack, Console. Operating voltage: 16 to 60 VDC. Operating temperature: 40 to +70ºC ( 40 to +158 F). Ethernet extender with serial support Ethernet extender with serial support 4 x 10/100 Mbit/s, Ethernet TX, RJ x 300 bit/s to kbit/s, RS-232, 9-pin D-sub (male). 2 x 32 kbit/s to 15.3 Mbit/s, SHDSL 2-position detachable screw terminal. 1 x Digital I/O, 4-position detachable screw terminal. 1 x 2.5 mm jack, Console. Operating voltage: 16 to 60 VDC. Operating temperature: 40 to +70ºC ( 40 to +158 F). 19

20 Routers Serial/PSTN Routers Wireless Routers Broadband DSL Routers Westermo provide a whole range of routers for use in demanding applications such as railways, water treatment, substation automation, roads and tunnels. Offering remote access solutions using ADSL or VDSL broadband and wireless 3G (UMTS, HSDPA, HSUPA) or GPRS technologies, Westermo ensures connections to your remote sites are resilient and reliable. As we know security is of paramount concern, all Westermo industrial routers include a powerful firewall to prevent unauthorised access. 20

21 Multiple media solutions for accessing your remote networks 21

22 Serial/PSTN Routers ED ED Wireless Routers Ethernet Router 4 x 10/100 Mbit/s, Ethernet TX, RJ x 300 bit/s to kbit/s, RS-232, 9-pin D-sub (male). 1 x 300 bit/s to kbit/s, RS-422/485 4-position detachable screw terminal. Operating voltage: 16 to 60 VDC. Operating temperature: 25 to +65ºC ( 13 to +149 F). Ethernet Router 4 x 10 Mbit/s, 100 Mbit/s, Ethernet TX, RJ x 600 bit/s to 33.6 kbit/s, 2 position detachable screw terminal, Leased Line. 1 x 600 bit/s to 33.6 kbit/s, PSTN, RJ-11C. Operating voltage: 10 to 60 VDC. Operating temperature: 25 to +65ºC ( 13 to +149 F). MRD MRD MRD MR MR Industrial mobile broadband / 3G router GSM / GPRS / EDGE / 3G / HSPA. 2 x 10 Mbit/s or 100 Mbit/s, Ethernet TX, RJ x 300 bit/s to kbit/s, RS-232, D-sub. 1 x SIM slot. Operating voltage: 10 to 60 VDC. Operating temperature: 30 to +70ºC ( 22 to +158ºF). Industrial mobile broadband / 3G router GSM / GPRS / EDGE / 3G / HSPA. 2 x 10 Mbit/s or 100 Mbit/s., Ethernet TX, RJ x 300 bit/s to kbit/s, RS-232, D-sub. 2 x Digital Input, 2 x Digital Output. 1 x SIM slot. Operating voltage: 10 to 60 VDC. Operating temperature: 30 to +70ºC ( 22 to +158ºF). Industrial mobile broadband / 3G router GSM / GPRS / EDGE / 3G / HSPA. 2 x 10 Mbit/s or 100 Mbit/s, Ethernet TX, RJ x 300 bit/s to kbit/s, RS-232, D-sub. 2 x SIM slots. Operating voltage: 10 to 60 VDC. Operating temperature: 30 to +70ºC ( 22 to +158ºF). Mobile broadband router 1 x 10 Mbit/s or 100 Mbit/s., Ethernet TX, RJ x 300 bit/s to kbit/s, RS-232, D-sub. 2 x SIM slots. Operating voltage: 9 to 48 VDC. Operating temperature: 20 to +60ºC ( 4 to +140ºF). Mobile broadband router 1 x 10 Mbit/s or 100 Mbit/s, Ethernet TX, RJ x 300 bit/s to kbit/s, RS-232, D-sub. 2 x SIM slots. Operating voltage: 9 to 48 VDC. Operating temperature: 20 to +55ºC ( 4 to +131ºF). 22 Routers

23 MR Mobile broadband router 4 x 10 Mbit/s or 100 Mbit/s, Ethernet TX, RJ x 300 bit/s to kbit/s, RS-232, D-sub. 2 x SIM slots. Operating voltage: 11 to 58 VDC. Operating temperature: 0 to +55ºC (32 to +131ºF). Broadband DSL Routers WeOS FDV-206-1D-1S ADSL Industrial Broadband Router 4 x 10 Mbit/s or 100 Mbit/s, Ethernet TX, RJ x 50 bit/s to kbit/s, RS-232, RJ x ADSL, ADSL2/ASDL2+/VDSL2, RJ-11. Operating voltage: 19 to 60 VDC. Operating temperature: 20 to +70ºC ( 4 to +158ºF). Industrial ADSL Router 2 x 10 Mbit/s or 100 Mbit/s, Ethernet TX, RJ x 300 bit/s to kbit/s, RS-232, RJ x ADSL, ADSL2/ASDL2+, RJ-11. Operating voltage: 10 to 60 VDC. Operating temperature: 25 to +70ºC ( 13 to +158ºF). DR xxxx Multiple media ADSL router 4 x 10 Mbit/s or 100 Mbit/s, Ethernet TX, RJ x 300 bit/s to kbit/s, RS-232, RJ x ADSL / ADSL2 / ADSL2+ / ADSL2++, RJ x SIM. Operating voltage: 10 to 28 VDC. Operating temperature: DR-260, 25 to +70ºC ( 13 to +158ºF), DR G, 25 to +55ºC ( 13 to +131ºF) DR-260A Multiple Media Router ADSL for Annex A DR-260A + 3G Multiple Media Router ADSL for Annex A + 3G backup DR-260A + 3G Multiple Media Router ADSL for Annex A + 3G & PSTN backup + PSTN DR-260B Multiple Media Router ADSL for Annex B DR-260B + 3G Multiple Media Router ADSL for Annex B + 3G backup DR-260B + Multiple Media Router ADSL for Annex B + 3G & ISDN backup 3G+ISDN DR-260B + ISDN Multiple Media Router ADSL for Annex B + ISDN backup DR-260A + PSTN Multiple Media Router ADSL for Annex A + PSTN backup Optional VPN tunnel extension upgrade; additional 50 Tunnels Optional VPN tunnel extension upgrade; additional 100 Tunnels Routers 23

24 Modems Fibre Optic Modems GSM/GPRS Modems ISDN Modems Leased Line / PSTN Modems Short Haul Modems Multidrop Modems Whether you need to communicate through a PSTN or ISDN line, across a private wire or leased line, down a fibre optic cable, or even over GSM/GPRS, Westermo have a solution. Our wide range of industrial modems is designed for use in such demanding applications as railways, water treatment, substation automation, roads and tunnels. All Westermo modems exceed industrial standards and ensure rugged, reliable communications. 24

25 Industrial data modems for the harshest environments 25

26 Fibre Optic Modems RS-232 / RS-485 ODW-720-F ODW-720-F1 EX ODW-720-F ODW-720-F2 EX ODW-730-F ODW-730-F1 EX ODW-730-F ODW-730-F2 EX PROFIBUS ODW-710-F ODW-710-F1 EX ODW-710-F ODW-710-F2 EX Point-to-point fibre converter, RS x Pluggable transceivers, SFP. 1 x 300 bit/s to 250 kbit/s, RS-232, D-sub. 1 x Detachable screw terminal, Status. Operating voltage: 10 to 60 VDC or 20 to 30 VAC. Ring / multidrop fibre converter, RS x Pluggable transceivers, SFP. 1 x 300 bit/s to 250 kbit/s, RS-232, D-sub. 1 x Detachable screw terminal, Status. Operating voltage: 10 to 60 VDC or 20 to 30 VAC. Operating temperature: 40 to +60 C ( 40 to +140 F). Point-to-point fibre converter, RS-422/485 1 x Pluggable transceivers, SFP. 1 x 300 bit/s to 1.5 Mbit/s, RS-422/485, D-sub. 1 x Detachable screw terminal, Status. Operating voltage: 10 to 60 VDC or 20 to 30 VAC. Ring / multidrop fibre converter, RS-422/485 2 x Pluggable transceivers, SFP. 1 x 300 bit/s to 1.5 Mbit/s RS-422/485, D-sub,. 1 x Detachable screw terminal, Status. Operating voltage: 10 to 60 VDC or 20 to 30 VAC. Operating temperature: 40 to +60 C ( 40 to +140 F). Point-to-point fibre converter, PROFIBUS 1 x Pluggable transceivers, SFP. 1 x bit/s to 12 Mbit/s, PROFIBUS DP (RS-485), D-sub. 1 x Detachable screw terminal, Status. Operating voltage: 10 to 60 VDC or 20 to 30 VAC. Ring / multidrop fibre converter, PROFIBUS 2 x Pluggable transceivers, SFP. 1 x bit/s to 12 Mbit/s, PROFIBUS DP (RS-485), D-sub. 1 x Detachable screw terminal, Status. Operating voltage: 10 to 60 VDC or 20 to 30 VAC. Operating temperature: 40 to +60 C ( 40 to +140 F). 26 Modems

27 Lo n Wo r k s LRW-102 PP 3650-xxxx LRW xxxx LRW-112 PP 3650-xxxx LRW xxxx GSM / GPRS Modems Fibre optic LON repeater for TP/FT-10, point-to-point 1 x pluggable transceivers, SFP 1 x 78.5 kbit/s, TP/FT-10, detachable screw terminal. 1 x Detachable screw terminal, Status. Operating voltage: 10 to 60 VDC or 20 to 30 VAC. Operating temperature: 40 to +60 C ( 40 to +140 F). Fibre optic LON repeater for TP/FT-10, multidrop and redundant ring 2 x pluggable transceivers, SFP 1 x 78.5 kbit/s, TP/FT-10, detachable screw terminal. 1 x Detachable screw terminal, Status. Operating voltage: 10 to 60 VDC or 20 to 30 VAC. Operating temperature: 40 to +60 C ( 40 to +140 F). Fibre optic LON router for TP/FT-10, point-to-point 1 x pluggable transceivers, SFP. 1 x 78.5 kbit/s, TP/FT-10, detachable screw terminal. 1 x Detachable screw terminal, Status. Operating voltage: 10 to 60 VDC or 20 to 30 VAC. Operating temperature: 40 to +60 C ( 40 to +140 F). Fibre optic LON router for TP/FT-10, multidrop and redundant ring 2 x pluggable transceivers, SFP. 1 x 78.5 kbit/s, TP/FT-10, detachable screw terminal. 1 x Detachable screw terminal, Status. Operating voltage: 10 to 60 VDC or 20 to 30 VAC. Operating temperature: 40 to +60 C ( 40 to +140 F). GDW GDW-11 EX GSM modem, GSM/GPRS 1 x 300 bit/s to kbit/s, RS x SIM slot. Operating voltage: 10 to 60 VDC. Operating temperature: 25 to +50 C ( 13 to +122 F). GDW GDW EX GD-01 US GSM modem, GSM/GPRS 1 x 300 bit/s to kbit/s, RS x 1200 bit/s to kbit/s, RS-422/ x SIM slot. Operating voltage: 10 to 60 VDC. Operating temperature: 25 to +50 C ( 13 to +122 F). GSM modem, UL approved, GSM/GPRS 2 x 300 bit/s kbit/s, RS-232, detachable screw terminal or D-sub. 1 x SIM slot. SMS Operating voltage: 10 to 60 VDC. Operating temperature: 25 to +50 C ( 13 to +122 F). Modems 27

28 ISDN Modems IDW PSTN / Leased Line Modems Industrial ISDN Modem 1 x 300 bit/s to kbit/s, RS x 300 bit/s to kbit/s, RS-422/ x 300 bit/s to kbit/s, ISDN. 1 x Digital I/O. Operating voltage: 10 to 60 VDC, 10 to 42 VAC. Operating temperature: +5 to +55 C (41 to +131 F). PSTN TDW TD xxxx TD xxxx TR-36B Industrial Telephone Modem 1 x 300 bit/s to kbit/s, RS x 300 bit/s to 56.7 kbit/s, Public Switched Telephone Network (PSTN). Operating voltage: 10 to 60 VDC or 10 to 42 VAC. Operating temperature: 25 to +70 C ( 13 to +158 F). Industrial PSTN and Leased Line Modem 1 x 300 bit/s to kbit/s, RS x 300 bit/s to 33.6 kbit/s, Leased Line (LL). 1 x 300 bit/s to 56.7 kbit/s, Public Switched Telephone Network (PSTN). Operating voltage: AV: 18 to 300 VDC, 22 to 264 VAC. LV: 12 to 48 VDC, 12 to 27 VAC. Operating temperature: 25 to +70 C ( 13 to +158 F). Industrial backup PSTN and Leased Line Modem 1 x 300 bit/s to kbit/s, RS x 300 bit/s to kbit/s, RS-422/485 1 x 300 bit/s to 33.6 kbit/s, Leased Line (LL). 1 x 300 bit/s to 56.7 kbit/s, Public Switched Telephone Network (PSTN). Operating voltage: AV: 18 to 300 VDC, 22 to 264 VAC. LV: 12 to 48 VDC, 12 to 27 VAC. Operating temperature: 25 to +70 C ( 13 to +158 F). Industrial Rack Modem Connected to rack RV-07B, see below. Operating voltage: 10 to 60 VDC. Operating temperature: 40 to +70ºC ( 40 to +158 F). RV-07B rack for TR-36B telephone and Leased Line modem 1 x 300 bit/s to kbit/s, RS x 300 bit/s to kbit/s, RS-422/ x 300 bit/s to 33.6 kbit/s, Leased Line (LL). 1 x 300 bit/s to 56.7 kbit/s, Public Switched Telephone Network (PSTN). 1 x Alarm output. Up to 16 x TR-36B s and 2 x PSU. Operating voltage: LV: 10 to 60 VDC 10 to 30 VAC. HV: 48 to 300 VDC, 85.5 to 264 VAC. 28 Modems

29 Leased Line TD xxxx TD xxxx TD-29P 3611-xxxx Short Haul Modems RS-232, point-to-point MD xxxx Multidrop Modems Multidrop modem 1 x 300 bit/s to kbit/s, RS x 300 bit/s to kbit/s, RS-422/ x 300 bit/s to 33.6 kbit/s, Leased Line (LL). 1 x Detachable screw terminal, Relay (optional). Operating voltage: LV: 10 to 60 VDC 10 to 30 VAC. HV: 48 to 300 VDC, 85.5 to 264 VAC. Operating temperature: 25 to +70 C ( 13 to +158 F). Multidrop FSK-modem 1 x 2400 bit/s to 19.2 kbit/s, RS x 2400 bit/s to 19.2 kbit/s, RS-422/ x 2400 bit/s to 19.2 kbit/s, FSK-Line. Operating voltage: AC: / VAC. DC: VDC and VDC. Operating temperature: +5 to +50 C (+41 to +122 F). FSK Multidrop PROFIBUS modem 1 x 2400 bit/s to 19.2 kbit/s, RS x 2400 bit/s to 19.2 kbit/s, FSK-Line. Operating voltage: AC: 104 to 132 / 207 to 264 VAC. DC: 12 to 36 VDC and 36 to 55 VDC. Operating temperature: +5 to +50 C (+41 to +122 F). Short-haul modem, point-to-point 1 x Up to 38.4 kbit/s, RS-232, D-sub. 1 x Up to 38.4 kbit/s, RS-232, detachable screw terminal. 1 x ±10 ma balanced current loop, Detachable screw terminal, Line connection. Operating voltage: 12 to 36 VDC. Operating temperature: +5 to +50 C (+41 to +122 F). 40 to +70ºC ( 40 to +158 F). RS-232, multidrop LD xxxx LD xxxx Line sharing modem 1 x Up to 38.4 kbit/s, RS-232, D-sub. 2 x Up to 38.4 kbit/s, RS-232, detachable screw terminal. 3 x ±10 ma balanced current loop, detachable screw terminal, line connection. Operating voltage: 12 to 36 VDC or 36 to 55 VDC or 207 to 264 VAC or 103 to 132 VAC. Operating temperature: +5 to +50 C (+41 to +122 F). Line sharing modem 1 x D-sub, up to 38.4 kbit/s, RS x Up to 38.4 kbit/s, RS-232, detachable screw terminal. 1 x Up to 38.4 kbit/s, RS-422/485, detachable screw terminal. 1 x ±10 ma balanced current loop, detachable screw terminal, line connection. Operating voltage: 12 to 36 VDC or 36 to 55 VDC or 207 to 264 VAC or 103 to 132 VAC. Operating temperature: +5 to +50 C (+41 to +122 F). Modems 29

30 Converters Serial Converters / Repeaters Current Loop Converters Ethernet Media Converters Protocol Converters Westermo can supply a range of converters / repeaters to suit a whole host of industrial protocols and communication methods, including Ethernet, RS-232, RS-422, RS-485, PROFIBUS DP, M-Bus and 20 ma current loop. Whether you need a fibre media converter for an Ethernet link, a serial converter, or a repeater for an RS-485 network, you can rest assure that Westermo have a solution which will operate in the harshest industrial environments and provide robust, reliable communications for peace of mind. 30

31 Industrial converters for industrial protocols 31

32 Serial Converters / Repeaters EDW EDW-100 EX EDW EDW-120 EX Serial Adapter 1 x 10/100 Mbit/s, Ethernet TX, RJ x 300 bit/s to kbit/s, RS-232, D-sub. 1 x 2400 bit/s to 19.2 kbit/s, RS-422/485, detachable screw terminal. Operating voltage: 10 to 60 VDC. Operating temperature: 25 to +70ºC ( 13 to +158ºF). Serial Adapter 1 x 10/100 Mbit/s, Ethernet TX, RJ x 300 bit/s to kbit/s, RS-232, D-sub. Operating voltage: 10 to 60 VDC. Operating temperature: 25 to +70ºC ( 13 to +158ºF). MD xxxx RD xxxx MDW xxx MDW-45 EX xxx MD xxxx Current Loop Converters RS-232 Isolator 1 x Up to kbit/s, RS-232, D-sub (DCE). 1 x Up to kbit/s, RS-232, D-sub (DTE). Operating voltage: 230 VAC, +15% 10%, Hz or VDC. Operating temperature: AC: 25 to +60ºC ( 13 to +140ºF). DC: 25 to +70ºC ( 13 to +158ºF). RS-422/485 Repeater 2 x 300 bit/s to 1.5 Mbit/s, RS-422/485 detachable screw terminal. Operating voltage: LV : 9.6 to 57.6 VDC. HV: 85.5 to 264 VAC or 88 to 300 VDC Operating temperature: 40 to +70 C ( 40 to 158 F). RS-422/485 Converter 1 x 1200 bit/s to kbit/s, RS-232, D-sub. 1 x 300 bit/s to 1.5 Mbit/s, RS-422/485, detachable screw terminal. Operating voltage: LV : 9.6 to 57.6 VDC. HV: 85.5 to 264 VAC or 88 to 300 VDC. Operating temperature: 40 to +70 C ( 40 to 158 F). RS-422/485 Converter 1 x 1200 bit/s to kbit/s, RS-232, D-sub or detachable screw terminal. 1 x 1200 bit/s to kbit/s, RS-422/485, detachable screw terminal. Operating voltage: LV : 12 to 30 VAC or 12 to 48 VDC. HV: 95 to 240 VAC or 110 to 250 VDC. AC: 230 VAC. Operating temperature: +5 to +55 C (+41 to 131 F). MD xxxx 20 ma Current loop converter 1 x Up to 19.2 kbit/s, RS-232, D-sub or detachable screw terminal. 1 x Up to 19.2 kbit/s, 20 ma current loop, detachable screw terminal. Operating voltage: AC: 207 to 264 VAC, 103 to 132 VAC. DC: 12 to 36 VDC, 36 to 55 VDC. Operating temperature: +5 to +50 C (+41 to 122 F). 32 Converters

33 Ethernet Media Converters MCW xxx MCW-211 EX xxx Industrial Ethernet Media Converter 1 x 10/100 Mbit/s, Ethernet TX. 1 x 100 Mbit/s, Ethernet FX. Operating voltage: 12 to 48 VDC. Operating temperature: 40 to +70ºC ( 40 to +158ºF). MCI-211G MCI-422- MM-SC MCI-422- SM-SC Gigabit Ethernet Media Converter 1 x 10/100/1000 Mbit/s, Ethernet TX, RJ x 1000 Mbit/s, pluggable transceivers, SFP. Operating voltage: 12 to 48 VDC. Operating temperature: 25 to +70ºC ( 13 to +158ºF). 2-channel Ethernet to Fibre Media Converter 2 x 10/100 Mbit/s, Ethernet TX, RJ x 100 Mbit/s Fibre port, Multi-mode 2 km, SC connector. Operating voltage: 10 to 60 VDC. Operating temperature: 40 to +75ºC ( 40 to +167ºF). 2-channel Ethernet to Fibre Media Converter 2 x 10/100 Mbit/s, Ethernet TX, RJ x 100 Mbit/s Fibre port, Single-mode 30 km, SC connector. Operating voltage: 10 to 60 VDC. Operating temperature: 40 to +75ºC ( 40 to +167ºF). Protocol Converters Fieldbus Adapter FD xxxx Fieldbus Converter FD M-Bus Converter AD Fieldbus adapter, PROFIBUS DP Slave 1 x Up to kbit/s, RS-232, D-sub. 1 x Up to 12 Mbit/s, PROFIBUS DP, D-sub. 1 x Up to kbit/s, RS-485, detachable screw terminal. Operating voltage: 9.6 to 57.6 VDC. Operating temperature: 25 to +70ºC ( 13 to +158ºF). Fieldbus converter, PROFIBUS DP Serial 1 x Up to kbit/s, RS-232, D-sub. 1 x Up to 12 Mbit/s, PROFIBUS DP, D-sub. 1 x Up to kbit/s, RS-485, detachable screw terminal. Operating voltage: 9.6 to 57.6 VDC. Operating temperature: 25 to +70ºC ( 13 to +158ºF). M-Bus adapter 1 x Up to 9600 bit/s, RS-232, D-sub or detachable screw terminals. 2 x Up to 9600 bit/s, RS-232, detachable screw terminals. 2 x Up to 9600 bit/s, Detachable screw terminals, M-Bus slave. Operating voltage: 207 to 253 VAC. Operating temperature: 0 to +50ºC (32 to +122ºF). Converters 33

34 Wireless Ethernet Wireless Ethernet Radio The Westermo range of wireless Ethernet products provides secure high-speed connectivity across a broad range of applications in industrial process and automation plants. Our wireless Ethernet products can be configured to operate as an access point, client, bridge or router for a host of applications. With support for 868 MHz, 900 MHz and Wi-Fi 2.4 GHz bands, our wireless Ethernet products can operate in the harshest environments all around the world. 34

35 Wireless solutions to fit any industrial application 35

36 Wireless Ethernet Radio RM xxxx RM xxxx RM xxxx Wireless Ethernet Radio Modem 869 MHz. (Europe), 76 kbit/s. 1 x Up to 100 Mbit/s, Ethernet TX. 1 x Up to kbit/s, RS-232, detachable screw terminal. 1 x Up to kbit/s, RS-485, detachable screw terminal. 1 x Up to 76.8 kbit/s., Antenna Operating voltage: 10 to 30 VDC. Operating temperature: 40 to +60 C ( 40 to 140 F). Wireless Ethernet Access Point and client 900 MHz. (US), 200 kbit/s. 1 x Up to 100 Mbit/s, Ethernet TX. 1 x Up to kbit/s, RS-232, detachable screw terminal. 1 x Up to kbit/s, RS-485, detachable screw terminal. 1 x Up to 200 kbit/s, Antenna. Operating voltage: 10 to 30 VDC. Operating temperature: 40 to +60 C ( 40 to 140 F). WLAN access point and client 2.4 GHz, b, 11 Mbit/s. 1 x Up to 100 Mbit/s, Ethernet TX. 1 x Up to kbit/s, RS-232, detachable screw terminal. 1 x Up to kbit/s, RS-485, detachable screw terminal. 1 x Up to 11 Mbit/s, Antenna. Operating voltage: 9 to 30 VDC. Operating temperature: 35 to +65 C ( 31 to 149 F). 36 Wireless

37 Housings Westermo product range Westermo products come in a series of different enclosures specially designed for harsh and demanding environments. All housings fulfil high grade quality requirements and allow the device to work in an extended temperature range. IP ranges span from IP 20 for the plastic housing up to IP 65 for the most rugged metal housing. 37

38 Housings Products Plastic house, DIN-mounted IP20 Dimension W x H x D 55 x 100 x 132 mm (2.1 x 3.9 x 5.2 in) ED-200, ED-210, TD-36, TD , GD-01 US, TD-23, TD-29, TD-29P, MD-12, LD-01, LD-02, MD-52, RD-48, FD-10, FD-40, MD-21, AD-01, MD-45. Plastic house, DIN-rail IP21 Metal housing, 2-slot, DIN-rail or wall mounted IP40 Metal housing, 3-slot, DIN-rail or wall mounted IP40 Metal housing, DIN-rail or table top IP20 Metal housing, DIN-rail or table top IP40 Metal housing, DIN-rail IP40 Plastic house, DIN-rail IP20 Metal housing, DIN-rail IP40 Dimension W x H x D 35 x 121 x 119 mm (1.37 x 4.76 x 4.68 in) Dimension W x H x D 134 x 105 x 122 mm (5.27 x 4.13 x 4.80 in) Dimension W x H x D 175 x 105 x 122 mm (6.88 x 4.13 x 4.80 in) Dimension W x H x D, 160 x 29 x 128 mm (6.29 x 1.14 x 5.03 in) Dimension W x H x D 239 x 29 x 154 mm (9.40 x 1.14 x 6.06 in) Dimension W x H x D 113 x 33 x 154 mm (4.44 x 1.29 x 6.06 in) Dimension W x H x D 113 x 55 x 154 mm (4.44 x 2.16 x 6.06 in) Dimension W x H x D 53 x 103 x 134 mm (2.08 x 4.05 x 5.27 in) Dimension W x H x D 35 x 150 x 135 mm (1.37 x 5.90 x 5.31 in) Dimension W x H x D 30 x 140 x 114 mm (1.18 x 5.51 x 4.48 in) Dimension W x H x D 52.5 x 100 x 101 mm (2.07 x 3.93 x 3.97 in) SDW-500-series, MCW-211, EDW- 100, EDW-120, DDW-100, DDW-120, TDW-33, GDW-11, GDW , IDW-90, ODW-600-series, LRW-1xx-series, MDW-45. RFI-6-F4G, RFI-10, RFI-10-F4G, DDW-220, DDW-225, DDW-226. RFI-18, RFI-14-F4G, RFI-18-F4G-T4G. MR-200, MR-250. DR-250. MRD-310. MRD-330. MRD-350 RM-80, RM-90. RM-240. Lynx-series, Falcon, DDW-142. Metal housing, Wall mounted IP65 Metal housing, Wall mounted IP65 Dimension W x H x D 175 x 100 x 50 mm (6.88 x 3.93 x 1.96 in) Dimension W x H x D 175 x 100 x 53.6 mm (6.88 x 3.93 x 2.11 in) Viper-x08 series. Viper-x12 series. Metal housing, Wall mounted IP65 Dimension W x H x D 175 x 100 x 144 mm (6.88 x 3.93 x 5.66 inch) RFR-12-FB 38 Housings

39 Housings Products Metal housing, Wall mounted IP65 Dimension W x H x D 175 x 100 x 98.5 mm (6.88 x 3.93 x 3.87 in) Viper-12 PoE-series. 19 Rack Metal housing IP20 Dimension W x H x D 485 x 135 x 180 mm (19.09 x 5.31 x 7.08 in) RV-07B. i-line housings Products Metal housing, DIN-rail IP31 Dimension W x H x D 30 x x 89 mm (1.18 x 4.40 x 3.50 in) SDI-500 series. Metal housing, DIN-rail IP31 Dimension W x H x D 55 x 120 x 108 mm (2.16 x 4.72 x 4.25 in) SDI-800 series. MCI-211G. Metal housing, DIN-rail IP31 Dimension W x H x D 66 x 149 x mm (2.59 x 5.86 x 5.16 in) PSI-660G. Metal housing, DIN-rail IP31 Dimension W x H x D 66 x 149 x mm (2.59 x 5.86 x 4.74 in) PSI-1010 series. Metal housing, DIN-rail IP31 Dimension W x H x D 55 x 120 x 99 mm (1.18 x 4.72 x 3.89 in) MCI-422 series. Metal housing, DIN-rail IP31 Metal housing, rack IP20 Dimension W x H x D 96 x 137 x 129 mm (3.77 x 5.39 x 5.07 in) Dimension W x H x D 96 x 137 x 129 mm (3.77 x 5.39 x 5.07 in) Dimension W x H x D 96 x 137 x 129 mm (3.77 x 5.39 x 5.07 in) Dimension W x H x D 438 x 44 x 170 mm (17.24 x 1.73 x 6.69 in) Dimension W x H x D x 44 x 375 mm (19.00 x 1.73 x in) MDI-110 series. MDI 112. MDI-118. MRI-128-F4G. MRI-128-F4G/DC. MRI-128-F4G-PSE24. MRI-128-F4G-PSE16. MRI-120-F4G-PSE8. Housings 39

40 Accessories Optical transceivers Power supplies Cables and antennas As well as industrial data communications devices, Westermo can also supply a range of vital accessories to provide a complete a solution. Whether you require an industrial rated power supply, optical transceivers for use with our many fibre optic devices, or cables and antennas for a wireless application, Westermo has your needs covered. 40

41 Applying the finishing touches to your industrial application 41

42 Transceivers Westermo offer a wide selection of Small Form Pluggable (SFP) transceivers. The selection of transceivers are available in a variety of models and lengths offering transmission rages from 2 km to 80 km (1.2 mi to 49.7 mi) over fibre. The CX transceiver allows SFP ports to be used to connect an Ethernet RJ-45 cable. Contact Westermo for detailed information. Product Single Mode Transceivers Multi Mode Transceivers Bi-directional Transceivers CX Transceiver Single Mode Transceivers are available in a variety of models. Transmission capacity from 100 Mbit to 1 Gibit and distances from 15 to 120 km (9.3 to 74.5 mi). Multi Mode Transceivers are available in a variety of models. Transmission capacity from 100 Mbit to 1 Gibit and distances from 550 m to 60 km (1805 ft to 37.2 mi).. Bi-Di Transceivers are available in a variety of models. 100 Mbit transmission capacity and distances from 2 km to 60 km. (1.2 mi to 37.2 mi) CX transceivers links a SFP port to a copper-based network using a standard RJ-45 connection. 1 Gbit transmission capacity and 100 m (328 ft) distance. 42 Accessories

43 Power Supplies / Adapters Westermo provides a set of industrially approved power supplies complying with many mayor safety approvals. The most common power supplies, PS-30 and PS-100, comes in a DIN-mounted housing and can operate in a extended temperature range. PS-20 HV Power supply for RV-07B Rated voltage: 100 to 240 VAC. Operating voltage: 90 to 254 VAC. PS Power supply, DIN-rail Output: DC 24 to 28V / 30 W PSU. Input: 85 to 264 VAC, 85 to 375 VDC. PS-100/ Power supply DIN-rail, PoE Ready PSU Output voltage: 48 to 56 VDC. *preset to: 48 V ± 2.1 A. Input: AC 100 to 120 / 220 to 240 V (Auto Select), 47 to 63 Hz. (AC 85 to 132 V / AC 184 to 264 V, DC 220 to 375 V). Backup Device The USB-M12 is a configuration backup device designed to meet the full requirements of the rail vehicle market. This device can be used with the Viper 212, Viper 112 and RFR-12-FB, and allows the configuration of the switch to be saved. The device can then be left attached to the switch for easy maintenance exchange of units or alternatively, the device allows configurations to be updated by simply plugging in the unit and repowering. USB M12 plug IP Electrical specification: USB v1.1. Data rate: Up to 480Mbit/s. Connection: M12 A-coded male. Memory size: 16 Mbyte. Accessories 43

44 Cables Special cables for reading diagnostics, antennas, radio, fibre and Ethernet are available in a variety of lengths and jacketing options. Please contact Westermo for further information. Diagnostic cable Cable for diagnostic DDW-100 DDW-100 to RS-232 Diagnostic cable Cable for diagnostic DDW-120 and RedFox Console port to USB M12 cables M12 M12. In length, 1 m, 5 m and 15 m (3.28 ft, ft and ft) M12-RJ45 cables M12 RJ-45 In length, 1 m, 5 m and 15 m (3.28 ft, ft and ft) Power cables -6,167 M12 In length, 1 m and 5 m (3.28 ft and ft) GSM cables TZC SMA/F-SMA/M Cables for antennas. In length, 3 m, 5 m and 10 m (9.84 ft, ft and ft) Radio cables RG213 Cables for antennas. In length, 3 m, 5 m, 7 m, 10 m and 15 m (9.84 ft, ft, ft, ft and ft) 44 Accessories

45 Antennas / Adapters Special antennas for radio and GSM are available in a variety of models. Please contact Westermo for further information. CA-930D DIPOLE, 4 dbi MHz CA-860D CA-930Y-series CA-860Y-series YAGI, 6 dbi, 8 dbi and 10 dbi, MHz YAGI, 6 dbi, 8 dbi and 10 dbi, MHz EX07 Whip antenna with magnetic foot, 900/1800 MHz GS-23/M70EXR Low profile antenna CA-860Q Whip antenna with SMA connector, MHz CA-2400M Corner reflector antenna 2.4 GHz, N-connector Accessories 45

46 Westermo Quality and Delivery Westermo design and manufacture robust data communication devices for harsh environments. We supply products that provide the communication infrastructure, derived from proven commercial technology, for control and monitoring systems that are used in mission critical solutions where commercial grade products are not sufficiently resilient. To ensure the highest quality products, Westermo has a state of the art industrial electronics manufacturing facility in Sweden. To maximise the reliability of the product testing is carried out at many stages of the manufacturing process. Manufacturing to IPC-A-610 under ISO QMS Solder Paste Inspection and Automated Optical Inspection X-ray examination and PCB testing Functional testing Burn-in testing to EN Part 15 / 68 Class 1, Div 2 EN On Board Rail 46 Approvals