MB88F334 Indigo2 MB88F335 Indigo2-S MB88F336 Indigo2-N

Transcription

1 MB88F334 Indigo2 MB88F335 Indigo2-S MB88F336 Indigo2-N Preliminary Product Information Rev0-11 October 17, 2012 October 17, 2012 pi-mb88f33x-indigo2(-x)-rev0-11

2 MB88F33x Indigo2(-x) Preface Intention and Target Audience of this Document This document describes and gives you insight to the stated Fujitsu semiconductor products. NOTE The term MB88F33x Indigo2(-x) refers collectively to the products in the device family. The difference between the products are stated clearly at the corresponding locations. The MB88F33x Indigo2(-x) device is used for graphics applications. The target audience of this document is engineers developing products which will use the MB88F33x Indigo2(-x) device. It gives an short overview of the devices. Trademarks System names and product names which appear in this document are the trademarks of the respective company or organization. Licenses Under the conditions of Philips corporation I2C patent, the license is valid where the device is used in an I2C system which conforms to the I2C standard specification by Philips Corporation. The purchase of Fujitsu I2C components conveys a license under the Philips I2C Patent Rights to use these components in an I2C system, provided that the system conforms to the I2C Standard Specification as defined by Philips. ii pi-mb88f33x-indigo2(-x)-rev0-11 October 17, 2012

3 MB88F33x Indigo2(-x) History Table 1-1: History Revision Date Author Description RvR - Schedule updated RvR - Schedule updated RvR - Correction of display modes (typo) RvR - Schedule updated AvT - First common version for all Indigo2 family devices RvR - Reviewed and updated RvR - Pinning overview deleted, graphic features updated RvR - Pinning overview figure added RvR - Reviewed and updated (some chapters omitted) RvR/AvT - Correction of memory sizes (typo) - Product name changed to MB88F RvR/AvT - Based on SI V1.0 October 17, 2012 pi-mb88f33x-indigo2(-x)-rev0-11 iii

4 MB88F33x Indigo2(-x) Table of Contents Chapter 1: Overview General Features Block Diagrams MB88F334 Indigo MB88F335 Indigo2-S MB88F336 Indigo2-N Package Device Comparison Schedule... 8 iv pi-mb88f33x-indigo2(-x)-rev0-11 October 17, 2012

5 MB88F33x Indigo2(-x) PRELIMINARY Chapter 1: Overview NOTE The content of this document is subject to changes without prior warning. Significant changes to the last version are marked with revision bars. 1.1 General The Indigo2 family devices (collectively referred to as MB88F33x Indigo2(-x) in this document) is a family of graphics controllers, designed for remote display applications in the automotive industry. They are optimized to work together with an MB86R12 Emerald-P SOC to control a dashboard display, Head-up-Display (HUD) systems and a Central Information Display (CID). In addition, the MB88F33x Indigo2(-x) SOC can be used to enable APIX2 (APIX version 2.0) based display systems in multiple applications in the automotive and industrial market segments. The differences between the Indigo2 family devices are documented here. Summarizing, the following statements can be made: MB88F334 Indigo2 : This is the main, fully-featured device. MB88F335 Indigo2-S : This is a scaled-down version of the MB88F334 Indigo2 device. Various features have been stripped out or reduced for price competitiveness. The maximum pixel clock for this device is 35 MHz. MB88F336 Indigo2-N : This is, basically, the MB88F334 Indigo2 device, but without HDCP functionality at the APIX link. 1.2 Features Technology CMOS 90nm (CU100F) Power Supply Voltages: 3.3 V I/O Display Interface 5.0 V (or 3.3 V) I/O Peripherals 5.0 V Stepper motor 1.2 V Internal Package QFP208 Ambient temperature range: -40 C C System Features 160 MHz System Clock 32 kb embedded flash Memory with ECC. 64 kb embedded SRAM. CPU/MCU/HOST Interface: Synchronous Serial Peripheral Interface (SPI), Automotive shell (AShell) sideband communication/link Command Sequencer DMA controller Touch controller support (hardware accelerated communication with external touch devices) (MB88F335 Indigo2-S not implemented) Configuration FIFO (to decouple host command stream and generate isochronous reconfiguration with internal peripherals) High-Speed (quad) mode SPI for connection to external SPI flash (MB88F335 Indigo2-S not implemented) October 17, 2012 pi-mb88f33x-indigo2(-x)-rev0-11 1

6 PRELIMINARY MB88F33x Indigo2(-x) Spread spectrum clock modulation Watchdog, alive sender, low voltage detection CRC checksum calculation for memory content APIX2 features RX interface Up to 3 GBit/s (MB88F335 Indigo2-S 1 GBits/s) APIX1 mode compatible HDCP for video link (MB88F335 Indigo2-S /MB88F336 Indigo2-N not implemented) Daisy chain output, i.e., connect through of the high-speed downstream APIX signal from the RX input to an additional APIX compatible TX interface, as well as the APIX upstream channel in the other direction (MB88F335 Indigo2-S not implemented) Sideband link AShell remote handler MII Interface/Ethernet over APIX (MB88F335 Indigo2-S not implemented) I2S output (MB88F335 Indigo2-S not implemented) Graphics features Integrated Pixel Engine (as opposed to Sprite Engine in the other Indigo family devices) Maximum pixel frequencies supported up to 144 MHz (eg. Hz, Hz) (MB88F335 Indigo2-S max. 35 MHz pixel clock = e.g., 960x 480@60 Hz) Display of run length encoded (RLE) background image (on-the-fly decoding) Display of icons with 1, 2, 4, 8 bpp (indirect, i.e., color palette) or 16 bpp, 24 bpp (direct) color depth. Icon size up to 2048x2048 pixel, depending on internal memory available. Icon on top of APIX video stream or on top of run length encoded background Flicker-free/seamless switch between an APIX video stream and a background video stream Dither and gamma unit Four signature units and each can compute a value for a display output frame to be compared against a pre-computed reference in order to detect corrupted data. Connection to displays with RSDS interface using a TCON with single or double 18 bpp or 24 bpp mode (MB88F335 Indigo2-S double mode not implemented) TTL interface with single 18 bpp or 24 bpp mode (support of data inversion for low EMI) or LVDS single mode (24bit or 18bit per pixel, balanced or unbalanced) up to 75MHz pixel frequency (MB88F335 Indigo2-S not implemented) LVDS dual mode (2x24bit or 2x18bit per pixel, balanced or unbalanced) up to 144MHz pixel frequency (MB88F335 Indigo2-S not implemented) Peripherals 6x stepper motor controllers 16 channel ADC+ 12 for Zero Point Detection (ZPD) 2x I 2 C 1x USART or 1x LIN SPI interface for up to 4 target devices (only one can be simultaneously served) Sound capability I2S via APIX (MB88F335 Indigo2-S not implemented) and internal sound generator 2 pi-mb88f33x-indigo2(-x)-rev0-11 October 17, 2012

7 MB88F33x Indigo2(-x) PRELIMINARY 16 x PWMs (Pulse Width Modulation) Max. 110 GPIOs (General Purpose I/Os). This is the maximum count when all I/O pins are switched to GPIO functionality. 8x External Interrupts 1.3 Block Diagrams MB88F334 Indigo2 Figure 1-1: Block Diagram MB88F334 Indigo2 October 17, 2012 pi-mb88f33x-indigo2(-x)-rev0-11 3

8 PRELIMINARY MB88F33x Indigo2(-x) MB88F335 Indigo2-S Figure 1-2: Block Diagram MB88F335 Indigo2-S 4 pi-mb88f33x-indigo2(-x)-rev0-11 October 17, 2012

9 MB88F33x Indigo2(-x) PRELIMINARY MB88F336 Indigo2-N Figure 1-3: Block Diagram MB88F336 Indigo2-N October 17, 2012 pi-mb88f33x-indigo2(-x)-rev0-11 5

10 PRELIMINARY MB88F33x Indigo2(-x) 1.4 Package Figure 1-4: FPT-208P-M06 6 pi-mb88f33x-indigo2(-x)-rev0-11 October 17, 2012

11 MB88F33x Indigo2(-x) 1.5 Device Comparison Table 1-2: Comparison of Indigo2 Family Devices MB88F33x Indigo2(-x) MB88F335 Indigo2-S MB88F336 Indigo2-N MB88F334 MB88F335 MB88F336 GENERAL Technology 90nm Flash Graphic core Pixel Engine Internal flash / RAM 32kB / 64kB Display output RGB888, RSDS RGB888, RSDS RGB888, RSDS max. 960 x 480@60Hz LVDS Yes No Yes Dual pixel mode Yes No Yes TCON 1 System clock 160Mhz, clock modulation module Video input APIX RX daisy chain output APIX RX with only 1GB APIX RX daisy chain output no MII and I2S over APIX Signature units 4 HDCP Yes No No Temperature range -40 C to +105 C Package QFP208 Quality grade AECQ100 MODULES / PERIPHERALS I2C 2 UART/SPI 4 LIN/USARTS 1 Host IF 1 PWM 16 (@ 16bit) ADC 24 SMC 6 GPIO All IOs switched to GPIO (max. of 110) Ext. Flash IF External interrupt inputs 1 (standard SPI, dual, quad mode) Reload timer 16 I2S (standard SPI, dual, quad mode) 8 October 17, 2012 pi-mb88f33x-indigo2(-x)-rev0-11 7

12 MB88F33x Indigo2(-x) 1.6 Schedule The current schedules are as follows: MB88F336 Indigo2(-N) : Engineering Samples (ES) Beginning of Feb Qualified Samples (CS incl. AEC-Q100) June 2013 Mass production Oct MB88F335 Indigo2(-S) : Engineering Samples (ES) Beginning of March 2013 Qualified Samples (CS incl. AEC-Q100) June 2013 Mass production Oct MB88F334 Indigo2 : Engineering Samples (ES) April 2013 Qualified Samples (CS incl. AEC-Q100) June 2013 Mass production Oct pi-mb88f33x-indigo2(-x)-rev0-11 October 17, 2012

13 MB88F33x Indigo2(-x) WARRANTY AND DISCLAIMER To the maximum extent permitted by applicable law, restricts its warranties and its liability for the Product [Hardware, Software and Documentation], its performance and any consequential damages, on the use of the Product in accordance with (i) the terms of the License Agreement and the Sale and Purchase Agreement under which agreements the Product has been delivered, (ii) the technical descriptions and (iii) all accompanying written materials. In addition, to the maximum extent permitted by applicable law, disclaims all warranties and liabilities for the performance of the Product and any consequential damages in cases of unauthorized decompiling and/or reverse engineering and/or disassembling. 1. warrants that the Product will perform substantially in accordance with the accompanying written materials, [Specifications etc.], for a period of 90 days from the date of receipt by the customer. Concerning the hardware components of the Product, warrants that the Product will be free from defects in material and workmanship under use and service as specified in the accompanying written materials for a duration of 1 year from the date of receipt by the customer. 2. Should a Product turn out to be defective, s entire liability and the customer's exclusive remedy shall be, at 's sole discretion, either return of the purchase price and the license fee, or replacement of the Product or parts thereof, if the Product is returned to in original packing and without further defects resulting from the customers use or the transport. However, this warranty is excluded if the defect has resulted from an accident not attributable to Fujitsu Semiconductor Europe GmbH, or abuse or misapplication attributable to the customer or any other third party not relating to. 3. To the maximum extent permitted by applicable law disclaims all other warranties, whether expressed or implied, in particular, but not limited to, warranties of merchantability and fitness for a particular purpose for which the Product is not designated. 4. To the maximum extent permitted by applicable law, 's and its suppliers liability is restricted to intention and gross negligence. NO LIABILITY FOR CONSEQUENTIAL DAMAGES To the maximum extent permitted by applicable law, in no event shall Fujitsu Semiconductor Europe GmbH and its suppliers be liable for any damages whatsoever (including but without limitation, consequential and/or indirect damages for personal injury, assets of substantial value, loss of profits, interruption of business operation, loss of information, or any other monetary or pecuniary loss) arising from the use of the Product. Should one of the above stipulations be or become invalid and/or unenforceable, the remaining stipulations shall stay in full effect. - Graphics Competence Center Forstenrieder Str. 10, D Neuried Germany Tel: +49 (89) Fax: +49 (89)